PVC 210 Gutter System Manual
PVC 210 Gutter System Manual
PVC 210 Gutter System Manual
INDEX
1. INTRODUCTION...page 2
2. PVC 210 GUTTER DIMENSIONS..page 3
3. PVC 210 GUTTER CONNECTIONS ...page 4
4. PVC ADHESIVE.....page 5-8
5. IMPORTANT THINGS TO
KEEP IN MIND..page 9
6. PVC 210 GUTTER SYSTEM
RECOMMENDATIONS..page 10
7. THE HANGING SYSTEM..page 11
8. THE HANGING UNITS.....page 12-14
9. THE STANDING SYSTEM........page 15-20
10. PP CONTAINERS FOR THE
PVC 210 GUTTER.......page 21-22
11. THE DRAINAGE SYSTEM FOR THE
PVC 210 GUTTER .....page 23-26
12. UNLOADING & STORAGE OF THE
PVC 210 GUTTER.....page 27-28
13. PVC ADHESIVE DATA SHEET...page 29-35
14. CONTACTSpage 36
1
INTRODUCTION
MAPALS PVC 210 GUTTER SYSTEM
The Mapal PVC 210 Gutter is an innovative product of
Mapals Agricultural Division, created to successfully
compete against the different metal gutters available.
Mapals PVC 210 Gutter is a more cost effective alternative
(by about 50%) to the metal gutters.
It is durable, strong, multifunctional, adjustable and much
lighter than metal (which is very important in old green
house structures).
To install a metal gutter system in most places around the
world, the grower must have the companys machinery in
his greenhouse, not so with Mapals PVC gutter which are
pre-molded and cut to different sizes, according to the
customers requirements.
Mapals PVC gutter can be used with Mapals PP
containers or/and any grow bag (perlite, coco peat, rock
wool, Peat) or any other kind of substrate.
Mapal also offers a full system which includes the PVC
gutters, growing troughs, drainage systems, hanging units
metal stands or adjustable metal stands.
The multi-functionality of Mapals system allows the
growers more flexibility in the decision making process
regarding their crops and how to grow them.
Features:
Durable fast drying constructive adhesive, intended for long-term
use in extreme weather conditions. Water and chemical resistant,
it's easy to apply with a squeezable bottle.
Bonds:
Rigid and semi rigid PVC, C-PVC, U-PVC.
Physical Properties:
Base: Synthetic copolymers.
Viscosity: 17000 CPS 2%.
Solid contents: 30% 2%.
Specific gravity: 1.01 gr./cm.
Flash point: -20C.
Bonding range: 1- 24 hours.
Coverage: 20-30 gr. per connector.
Color:
Light blue.
Application information:
The additional
line of PVC
adhesive will
ensure that
there is no
leakage
product.
8
Warning:
If the grower does not follow the instructions, the PVC 210 gutter
might suffer irreparable damage.
Mapal does not take responsibility and will not be held liable for
damage incurred to the PVC 210 gutter due to faulty care by the
customer.
9
11
HANGING UNITS
Description:
A Metal hanging unit, 5.8 mm in diameter, made of ASE 1040
material, galvanized
It is also possible to use the second metal hanging unit (picture 2),
when positioning the PVC gutter in the shape of U. This unit is less
expensive yet lacks the advantage of having where to hang the
drip pipeline.
12
When using the gutter in the shape of a ( the inverse of the U):
When using the unit shown in the upper drawing (B), only the
upper drawing (1) metal hanging unit fits and can be used.
The Maximum distance between the hanging units, along the
gutters, is of 1 meter.
Properties description:
- M10 bolts with 100 mm adjustable length.
- Diameter in the inner hole of the Ring - Min. 12.5 mm.
13
14
The only disadvantage between the two systems is that while the
metal gutters need a stand or a hanging unit every 4 meters,
MAPALS New PVC gutter system requires a stand or hanging unit
every 1 meter.
Mapal offers two size stands for the PVC 210 Gutter:
1-.The 17 cm Stand
2-.The 33 cm stand.
.1
.2
16
The PVC 210 Gutter on metal stands for the grow bag to be placed
inside (A)
The PVC 210 Gutter on metal stands for the grow bag to be placed
on top (B)
17
19
20
21
22
C
23
Once you have assembled the end unit you can add to it
the 1 outlet drainage unit (D).
D
24
25
26
1. When you open the container, make sure that the PVC
drainage gutters are not damaged, bent, broken or twisted, and
that they sit on top of each other in a straight line. If there are
any problems, please send photos along with the order and
container number.
2. Prepare a considerable flat area for placing the PVC drainage
gutters.
27
3. When removing the PVC gutters from the container, place one
above the other, as they were in the container. The PVC gutters
should be handled manually, not pulled or machine handled when
being removed from the container. With 11.7 meters long gutters
one must be even more vigilant.
4. You should not throw or drop the PVC gutter, especially at a
temperature below 10 C/50 F.
United States
WELDON, from the United States produces PVC-CEMENT 719
which can also be used as a PVC adhesive.
http://www.ipscorp.com/weldon/
29
UPDATED: 10.07.06
Material Safety Data Sheet (MSDS)
G-PVC
Inhalation:
When heated, material emits irritating vapors, affecting the
respiratory tract and other mucous membranes.
Symptoms include nausea, sleepiness, headache, dizziness,
anesthetic effects.
Skin contact:
May produce skin irritation.
Repeated or prolonged skin contact may cause dermatitis and
defatting.
Eye contact:
When heated, material emits highly irritating vapors,
affecting the eyes.
Ingestion:
See inhalation.
4. First Aid measures
General: Take off immediately all contaminated clothing.
Inhalation: if vapor is inhaled in high concentrations, take
the person into the fresh air and keep him warm, let him
rest. If there is difficulty in breathing, medical advice is
required.
Skin contact: After contact with skin, wash immediately
with plenty of water and soap.
Eye contact: Rinse opened eye for several minutes under
running water. If symptoms persist, consult a doctor.
Swallowing: DO NOT induce the patient to vomit, seek
medical advice.
MAPAL PLASTICS
AGRICULTURAL PRODUCTS DIVISION
MEVO HAMMA, 12934 ISRAEL
Tel: +972-4-6764784/ 555 / 754
Cell: +972-52-8695370 / 355
Fax: +972-4-6764756
rubzvi@mapalplastics.com
sandra@mapalplastics.com
mapal@mapalplastics.com
web: http://www.mapalplastics.com/agr.html
36