Manual Crispin
Manual Crispin
Manual Crispin
Tutorials Manual
Designing a court shoe
Contents
Designing a court shoe
Contents i
The model will then be provided with the correct data and you will
be able to complete the tutorial.
You can view the AVI for this step to see how the commands would
work.
*In most cases selecting an icon will inform you that the necessary
licence is missing. In some modules of ShoeMaker the icon(s) may
be missing entirely.
1 Click Import Data.
.
.
4 Browse to the drive and folder where the tutorial files are stored:
*\PS-TutorialsXXXXX\common_files\
dcshoe\court\dgk
(where XXXXX is the version number of the Tutorials and
court_1.igs
7 Click Open.
8 Click OK.
10 Click Next.
You can define the points on the last by clicking a new point on
the last or by selecting existing points. In this example the points
exist already.
12 Click the Heel top point then the Heel bottom point:
18 Click the Outer girth point, the Centre girth point, and the Vamp
point.
23 Click Add.
24 Click OK.
25 Click Next.
Top and feather lines are generated automatically
26 Click Next.
Select Right.
Select Above.
31 Click Finish.
The model will then be provided with the correct data and you will
be able to complete the tutorial.
You can view the AVI for this step to see how the commands would
work.
*In most cases selecting an icon will inform you that the necessary
licence is missing. In some modules of ShoeMaker the icon(s) may
be missing entirely.
1 Click Last
4 Drag the Toe and Heel markers into position, as shown below:
court_outer.jpg
7 Click Open.
The stencil image is drawn over the last:
cursor is displayed.
10 Move the cursor over the middle of the stencil, until the Move
cursor is displayed.
11 Drag the cursor to align the image with the last.
If you haven't got the image in this position, try a few more
edits. To rotate the stencil, click and drag on a line when the
Rotate
12 Click Wrap
cursor is displayed.
.
14 Browse to the drive and folder where the tutorial files are stored:
*\PS-TutorialsXXXXX\common_files\
dcshoe\court\dgk
(where XXXXX is the version number of the Tutorials and
court_inner.jpg
16 Click Open.
17 Click View from left
18 Repeat the earlier steps to resize and align the stencil image to
the last.
6 Click Select
7 Click View ISO 2
.
.
14 Click to create the second point at the end of the first style line:
15 Click more points to create the style line, tracing the stencil
image.
16 Click the final point on the centre line:
17 Click Select
Press the T key to toggle between the ends of the style line.
8 Click points tracing the stencil image along the top edge:
Inserting the last point on the end of other style line makes
it parallel to the other style line.
11 Add the other three Style lines using Extend style line:
Ensure the points of the inner bottom style line don't touch the
feather line.
3 Click Cut
5 Click Select
.
.
9 Sketch a style line from the top style-line to the feather line:
10 Click Select
.
.
14 Select each end point in turn and drag them to the top line and
feather line.
Piece creation
7. Create upper pieces - 1
1 Click View from right
2 Click Piece
twice.
8 Click Samples.
10 Click 0022.
19 Click Select
three times.
twice.
27 Click Select
twice.
twice.
5 Click Samples.
15 Click Select
23 Click Select
6 Click the other style lines to finish defining the shoe piece:
The piece runs from the outer side of the last to the inner side.
The piece is created with default offset and thickness.
7 Click Select
Qtr_I_2
Qtr_I_3
Qtr_I_4
2 Click Qtr_O_1.
5 Click Qtr_I_1.
7 Click Qtr_I_2.
5 Click and drag the cursor over piece Qtr_O_1 so that the texture
rotates, release when the texture matches the piece Qtr_I_1.
7 Click Qtr_O_3.
8 Click Edit the texture orientation
5 Click OK.
The group is added to the Levels toolbar:
7 Click Piece
8 Click Select
11 Right-click on Level 5.
12 Select Add Selection.
All the pieces are moved to level 5, and are no longer displayed
on the screen.
13 Click group level Piece.
.
.
5 Press and hold the Ctrl and Shift keys and click the top style lines
and the red style line.
7 Press and hold the Ctrl and Shift keys and click on the red style
line.
10 Click Piece
14 Click Samples.
24 Click Select
.
.
27 Click Samples.
34 Click Select
37 Click OK.
38 Click Select
41 Right-click on Level 6.
42 Select Add Selection.
Stitch creation
14. Create stitches
1 Click View from right
2 Click Stitch
once.
10 Click Select
12 Click Samples.
19 Click Select
once.
36 Click Samples.
Pipe creation
15. Create pipes
1 Click level 6 to turn it on.
2 Click Pipe
twice.
once.
9 Click Samples.
10 Select the Summer tab.
11 Click Muted19.
12 Click Select
from
19 Click Samples.
20 Select the Summer tab.
21 Click Muted19.
22 Click Select
Accessory creation
16. Add accessories
1 Click Accessory
3 Click Others.
5 Double-click Trim2.
7 Click Select
11 Click Samples.
12 Select the Metal tab.
13 Click Copper.
14 Click anywhere in the graphics window to deselect the model.
Sole creation
17. Import a sole
1 Click Import data file
2 Click Import sole
.
.
3 Browse to the drive and folder where the tutorial files are stored:
*\PS-TutorialsXXXXX\common_files\
dcshoe\court\dgk
(where XXXXX is the version number of the Tutorials and
13 Click OK.
Summary
You have created a court shoe upper from a last.
You have done the following:
Created stitches
Created pipes
Created accessories
Imported a sole