Codes PC8000

KOMTRAX Plus
Tables of all Provided Messages
17.3 TABLES OF ALL PROVIDED MESSAGES

G-Codes
For excavator PC8000-6 with MTC controller, including optional equipment

refer to section 17.3.1 on page 17-28.
C-Codes (TIER 2)
For Diesel engines QSK60 with Emission Standard TIER 2,

refer to section 17.3.2 on page 17-35.
Instruction Messages
For the above G-Codes & C-Codes, refer to section 17.3.3 on page 17-42.
REMARKS: Messages without color code are not displayed on the VHMS monitor.
These messages are stored in the history memory only.
Explanation of the columns in the following Error Code charts
Error Code
G = Shovel message
C = Engine message (Cummins)
Colour Code of
Top Message
0 = Red,
1 = Yellow,
2 = Green
Instruction
Message No.
Number of the Instruction Message, which is displayed together with the Error Code
(numbers 1 - 58)
Display
1 = displayed once,
2 = displayed at each occurrence,
N = NOT displayed
Acoustic Signal
Y = an acoustic signal sounds if the relating error occurs
Memory
The error or message is saved in a History Memory:

1 = Service & Operator History,
2 = Service History,
3 = Operator History,
5 = VHMS History
G-Code / C-Code
Text of the G-type or C-type Error Code or Message
SM 12071-xD-GB-0
PC8000-6
17 - 27
KOMTRAX Plus
Error
Code
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Instruction
Message No.
Display
(Message
Code)
Colour
Code of
Top
Message
Acoustic Signal
17.3.1 TABLE OF G-CODES
G00001
Trouble Shut-Off (gate) valve
G00002
37
Test speed 1800 1/min engine 1
G00003
38
Trouble pump controller
G00005
39
Low hydraulic oil level
G00006
37
Test speed 1800 1/min engine 2
G00007
Trouble hydraulic oil level
G00012
17
Central lubrication system grease level too low
G00013
17
Slew ring gear lubr. system grease level too low
G00020
Trouble Shut-Off (gate) valve (Start blocked)
G00031
Set engine to low idle
G00032
Trouble starter
G00033
Trouble VHMS-Controller
G00034
Trouble VHMS-Display
G00035
34
Trouble totally loss gear oil (PTO 1)
G00036
34
Trouble totally loss gear oil (PTO 2)
G00037
Trouble monitoring, engine 2 speed too low
G00038
Trouble monitoring, engine 2 speed too high
G00039
Actuate engine speed selector switch
G00040
10
Emergency shut-down pump compartment
G00042
Trouble monitoring screen at hydr. cooler entry
G00043
Trouble output short-circuit
G00048
Trouble emergency safety circuit
G00053
56
Reset emergency safety circuit
G00054
Monitoring idle position cut off
G00060
Fire in the power house
G00061
Trouble monitoring, engine 1 speed too low
G00062
Trouble monitoring, engine 1 speed too high
G00063
Trouble monitoring hydraulic oil temp
G00064
Trouble monitoring hydraulic oil level
17 - 28
Memory
G-Code
PC8000-6
SM 12071-xD-GB-0
KOMTRAX Plus
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Instruction
Message No.
Display
(Message
Code)
Colour
Code of
Top
Message
Acoustic Signal
Error
Code
G00065
Very low hydraulic oil level
G00066
Trouble hydraulic oil temperature
G00067
Trouble battery voltage too high
G00068
Trouble gear lubrication (PTO 2)
G00069
Trouble monitoring oil temperature gear (PTO 1)
G00070
Trouble oil temperature gear (PTO 1)
G00071
Trouble gear lubrication (PTO 1)
G00081
Trouble lubrication system
G00083
Trouble monitoring oil temperature gear (PTO 2)
G00084
Trouble oil temperature gear (PTO 2)
G00085
Trouble monitoring pressure oil cooler 2
G00086
12
SHUTDOWN
G00087
Stop all movements for low idle
G00090
Trouble power supply
G00091
Pilot control cut out
G00092
10
Emergency shut-down at access ladder
G00093
10
Emergency shut-down at valve block
G00094
10
Emergency shut-down at hydraulic control panel
G00095
10
Emergency shut-down in cabin
G00096
14
Pilot control cut out
G00097
10
Emergency shut-down at counterweight
G00099
48
Trouble power supply
G00100
11
Maintenance safety switch
G00103
47
Faulty switch 20M004
G00104
15
Trouble battery current
G00105
16
Trouble battery charging current too low
G00106
49
Faulty switch 20M007
G00107
Trouble slew parking brake control 56K250a
G00108
Trouble slew parking brake control Output to 56K250a
G00109
Trouble slew parking brake control 56K250b
G00110
Trouble slew parking brake control Output to 56K250b
SM 12071-xD-GB-0
Memory
G-Code
PC8000-6
17 - 29
KOMTRAX Plus
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Display
Acoustic Signal
Memory
Colour
Code of
Top
Message
Instruction
Message No.
Error
Code
G00111
Trouble travel parking brake control 56K251a
G00112
Trouble travel parking brake control Output to 56K251a
G00113
Trouble travel parking brake control 56K251b
G00114
Trouble travel parking brake control Output to 56K251b
G00115
Trouble slew hydraulic brake control 56K252a
G00116
Trouble slew hydraulic brake control Output to 56K252a
G00117
Trouble slew hydraulic brake control 56K252b
G00118
Trouble slew hydraulic brake control Output to 56K252b
G00139
17
Trouble monitoring X1-2 Pressure
G00140
17
Trouble monitoring X1-1 Pressure
G00141
17
Trouble monitoring X2-Pressure
G00142
17
Trouble monitoring pump support pressure X4-1
G00143
Trouble monitoring 61B087a
G00144
Trouble monitoring 61B087b
G00145
Trouble monitoring 61B087c
G00146
Trouble monitoring 61B087d
G00147
17
Trouble monitoring gear lubrication (PTO 1)
G00148
17
Trouble monitoring fuel level
G00149
Trouble monitoring ambient temperature
G00150
17
Trouble monitoring gear lubrication (PTO 2)
G00151
17
Trouble monitoring gear (PTO) oil filter 1
G00152
17
Trouble monitoring oil filter pump lubrication
G00154
17
Trouble monitoring return oil filter
G00155
17
Trouble monitoring leak oil filter
G00159
17
Trouble monitoring breather filter
G00160
17
Trouble monitoring engine air cleaner 1
G00161
17
Trouble monitoring battery voltage
G00163
17
Trouble monitoring pilot control
G00164
17
Trouble air cleaner 1
G00165
17
Trouble breather filter hydraulic oil tank
G00166
17
Trouble oil filter gear (PTO 1)
(Message
Code)
17 - 30
G-Code
PC8000-6
SM 12071-xD-GB-0
KOMTRAX Plus
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Instruction
Message No.
Display
(Message
Code)
Colour
Code of
Top
Message
Acoustic Signal
Error
Code
G00169
17
Trouble return oil filter hydraulic oil tank
G00170
17
Trouble leak oil filter hydraulic oil tank
G00173
18
Trouble monitoring slew ring gear house brake
G00174
19
Trouble monitoring travel gear house brake
G00175
19
Trouble travel gear house brake
G00176
17
Trouble battery voltage too low
G00177
17
Trouble battery charging circuit
G00178
17
Trouble battery charging current too high
G00179
17
Trouble control pressure X1-1
G00180
17
Trouble pilot pressure X2 too low
G00181
17
Trouble pilot pressure X2 too high
G00182
17
Trouble control pressure X1-2
G00183
17
Trouble pump support pressure X4-1
G00184
20
Central lubrication system empty
G00185
20
Trouble central lubrication system
G00186
20
Trouble central lubrication system
G00187
20
Slew ring gear lubrication system empty
G00188
20
Trouble slew ring gear lubrication system
G00189
20
Trouble slew ring gear lubrication system
G00191
17
Trouble oil filter gear (PTO 2)
G00193
17
Trouble monitoring gear (PTO) oil filter 2
G00195
17
Trouble pump support pressure X4-2
G00196
17
Trouble monitoring pump support pressure X4-2
G00197
17
Trouble monitoring engine air cleaner 2
G00198
17
Trouble air cleaner 2
G00201
20
Attachment lubrication system empty
G00202
17
Attachment lubrication system grease level too low
G00203
20
Trouble attachment lubrication system
G00204
20
Trouble attachment lubrication system
G00205
Trouble monitoring grease level (attachment)
G00207
Engine remote oil-tank 1 empty
SM 12071-xD-GB-0
Memory
G-Code
PC8000-6
17 - 31
KOMTRAX Plus
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Display
Acoustic Signal
Memory
Colour
Code of
Top
Message
Instruction
Message No.
Error
Code
G00208
Engine remote oil-tank 2 empty
G00216
Trouble software not compatible
G00220
Trouble transfer pump motor overheated
G00221
Trouble slew direction module defect
G00223
Trouble starter control 51K001a-1
G00224
Trouble starter control Output to 51K001a-1
G00225
Trouble starter control 51K001b-1
G00226
Trouble starter control Output to 51K001b-1
G00227
Trouble starter control 51K001a-2
G00228
Trouble starter control Output to 51K001a-2
G00229
Trouble starter control 51K001b-2
G00230
Trouble starter control Output to 51K001b-2
G00231
Trouble pilot control lever 20S019
G00232
Trouble pilot control lever 20S020
G00233
Trouble pilot control 11Q045
G00234
Trouble pilot control 11K111a
G00235
Trouble pilot control Output to 11K111a
G00236
Trouble pilot control 11K111b
G00237
Trouble pilot control Output to 11K111b
G00238
Trouble supply by key switch 11Q044
G00239
Trouble electrical matter
G00240
21
Trouble hydraulic oil temperature
G00242
22
Engine 1 already running
G00243
23
Fill up fuel tank
G00245
24
Engine shutdown from ground
G00246
25
Hydraulic oil temperature
G00247
26
Slew ring gear house brake
G00248
22
Engine 2 already running
G00249
27
G00252
10
Emergency shut-down at access ladder
G00253
10
Emergency shut-down at valve block
(Message
Code)
17 - 32
G-Code
PC8000-6
SM 12071-xD-GB-0
KOMTRAX Plus
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Instruction
Message No.
Display
(Message
Code)
Colour
Code of
Top
Message
Acoustic Signal
Error
Code
G00254
10
Emergency shut-down at hydraulic control panel
G00255
10
Emergency shut-down in cabin
G00256
45
Operator warning system
G00257
30
G00258
10
Emergency shut-down at counterweight
G00261
11
Maintenance Safety Switch
G00262
20
Trouble screen at hydr. cooler entry clogged
G00308
Trouble CAN-Bus or CAN-Hardware
G00309
Trouble ladder up 56K253a
G00310
Trouble ladder up Output to 56K253a
G00311
Trouble ladder up redundant 56K253b
G00312
Trouble ladder up redundant Output to 56K253b
G00313
Trouble ladder down 56K254a
G00314
Trouble ladder down Output to 56K254a
G00315
Trouble ladder down redundant 56K254b
G00316
Trouble ladder down redundant Output to 56K254b
G00317
Trouble service arm up 56K255a
G00318
Trouble service arm up Output to 56K255a
G00319
Trouble service arm up redundant 56K255b
G00320
Trouble service arm up redundant Output to 56K255b
G00321
Trouble service arm down 56K256a
G00322
Trouble service arm down Output to 56K256a
G00323
Trouble service arm down redundant 56K256b
G00324
Trouble service arm down redundant Output to 56K256b
G00325
Trouble service arm input
G00326
Trouble ladder input
G00327
Trouble parking brake input
G00328
Trouble start input
G00329
38
Protection switch tripped
G00330
Trouble pilot control 11Q111
SM 12071-xD-GB-0
Memory
G-Code
PC8000-6
17 - 33
KOMTRAX Plus
0 = RED
1 = YELLOW
2 = GREEN
G-Code
Memory
G = Shovel
C = Engine
Acoustic Signal
(Message
Code)
Colour
Code of
Top
Message
Display
Error
Code
Instruction
Message No.
G00401
Shutdown: Engine / Motor shutdown at bottom - off
G00402
Shutdown: Engine / Motor shutdown at bottom - on
G00417
Communication failure PLC <==> VHMS-Controller
G00419
Source voltage error
G00420
Connector sel error
G00421
G00422
Can-net sys (J1939)
G00423
Application sys error
G00425
Settings impossible to take over into the PLC
G00491
Communication failure MH800 <==> VHMS-Controller
G00533
13
17 - 34
Farm sys error
Engine state is "Warm-up"
PC8000-6
SM 12071-xD-GB-0
KOMTRAX Plus
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Instruction
Message No.
Display
(Message
Code)
Colour
Code of
Top
Message
C115
34
Memory
Error
Code
Acoustic Signal
17.3.2 TABLE OF C-CODES - DIESEL ENGINES QSK60 TIER 2
Engine Speed Signal Lost
C-Code TIER 2
C135
Oil Press Ckt Failed High
C141
Oil Press Ckt Failed Low
C143
33
Low Oil Press
C144
20
Coolant Temp Ckt Failed High
C145
20
Coolant Temp Ckt Failed Low
C146
40
Coolant Temp Above Normal
C151
33
High Coolant Temp
C153
Int Man Temp 1 Ckt Failed High
C154
Int Man Temp 1 Ckt Failed Low
High Int Man Temp 1
C155
32
C156
C157
High Int Man Temp 2
C158
32
C159
C161
High Int Man Temp 3
C162
32
C163
C164
High Int Man Temp 4
C165
32
C187
Sensor Supply 2 Ckt Failed Low
C195
Coolant Level Ckt Failed High
C196
Coolant Level Ckt Failed Low
C197
Coolant Level Below Normal
C212
Oil Temp Ckt Failed High
C213
Oil Temp Ckt Failed Low
Engine Oil Temp to High
C214
32
C221
Ambient Air Press Failed High
C222
Ambient Air Press Failed Low
SM 12071-xD-GB-0
PC8000-6
17 - 35
KOMTRAX Plus
0 = RED
1 = YELLOW
2 = GREEN
C-Code TIER 2
Memory
G = Shovel
C = Engine
Acoustic Signal
(Message
Code)
Colour
Code of
Top
Message
Display
Error
Code
Instruction
Message No.
C223
Centinel Burn Valve Below Normal
C224
Centinel Burn Valve Above Normal
C227
Sensor Supply 2 Ckt Failed High
Very Low Coolant Pressure
C228
32
C231
Coolant Press Ckt Failed High
C232
Coolant Press Ckt Failed Low
C234
32
Engine overspeed
C235
31
Low Coolant Level
C238
C245
Fan Control Circuit Failed Low
High Fuel Temp
C261
31
C263
Fuel Temp Ckt Failed High
C265
Fuel Temp Ckt Failed Low
Very High Fuel Temp
C266
33
C271
40
Fuel Pump Press 1 Ckt Failed Low
C272
40
11
Fuel Pump Press 1 Ckt Failed High
C322
40
Injector Sol Driver Cyl 1 Below Normal
C323
40
C324
40
C325
40
C331
40
C332
40
ECM Hardware Issue Non Mission Disabling
Injector Power Supply Failed Low
C352
C386
Sensor Supply 1 Ckt Failed High
Very Low Oil Pressure
WIF Indicator Warning
C343
C351
34
C415
32
C418
31
C421
40
Engine Oil Temp Above Normal
C441
31
Low Battery Voltage
C442
31
High Battery Voltage
17 - 36
PC8000-6
SM 12071-xD-GB-0
KOMTRAX Plus
0 = RED
1 = YELLOW
2 = GREEN
Display
C449
31
Memory
G = Shovel
C = Engine
Instruction
Message No.
(Message
Code)
Colour
Code of
Top
Message
Acoustic Signal
Error
Code
High Rail Pressure
C-Code TIER 2
C451
Rail Press Ckt Failed High
C452
Rail Press Ckt Failed Low
High Intake Manifold Temp
C527
Dual Output A Failed High
C529
Dual Output B Failed High
C546
Fuel Del Pressure Ckt Failed High
C547
Fuel Del Pressure Ckt Failed Low
High Crankcase Pressure
C488
31
C556
32
C559
40
Rail Pressure 1 Below Normal
C621
Low Power Cylinder 1
C622
C623
C624
C625
C626
C627
C628
C631
C632
C633
C634
C635
C636
C637
C638
C671
Exh Temp Ckt Failed Low Cylinder 1
C672
C673
C674
C675
SM 12071-xD-GB-0
PC8000-6
17 - 37
KOMTRAX Plus
0 = RED
1 = YELLOW
2 = GREEN
C-Code TIER 2
Memory
G = Shovel
C = Engine
Acoustic Signal
(Message
Code)
Colour
Code of
Top
Message
Display
Error
Code
Instruction
Message No.
C676
C677
C678
Engine Crankshaft Speed Erratic
C721
C722
C723
C724
C725
C726
C727
C728
C731
Engine Speed Cam/Crank Misalignment
Rapid rise int man temp 1
Power Lost with Ignition On
C689
C783
40
32
C1117
C1357
31
Remote Oil Level Below Normal
C1362
31
High Lube Oil Filter Restriction
C1363
40
Int Man Press 1 Below Normal
C1367
Pre Filter Oil Press Ckt Failed High
C1368
Pre Filter Oil Press Ckt Failed Low
C1373
Ether Injection Ckt Failed
C1377
Post Filter Oil Press Ckt Failed High
C1378
Post Filter Oil Press Ckt Failed Low
C1383
Int Man Press 1 Failed High
C1384
Int Man Press 1 Failed Low
C1385
Int Man Press 2 Failed High
C1386
Int Man Press 2 Failed Low
J1939 Engine Commanded Shutdown
C1387
34
C1411
Gen Output Freq Ckt Failed High
C1412
Droop Adj Ckt Failed High
C1418
Gain Adj Ckt Failed High
17 - 38
PC8000-6
SM 12071-xD-GB-0
KOMTRAX Plus
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Display
Acoustic Signal
Memory
Colour
Code of
Top
Message
Instruction
Message No.
Error
Code
C1427
Overspeed Shutdown Relay Driver Error
C1428
Low Oil Press Shutdown Relay Driver Err
C1429
High Eng Temp Shutdown Relay Driver Err
(Message
Code)
C-Code TIER 2
C1431
Oil Pressure Relay Driver Error
C1432
High Engine Temp Relay Driver Error
C1517
31
ECM Detects Most Severe Fault
C1518
31
ECM Detects Moderately Severe Fault
C1519
31
ECM Detects Least Severe Fault
C1521
Exh Temp Ckt Failed High Cylinder 3
C1522
C1523
C1524
C1525
C1526
C1527
C1529
C1531
C1532
C1533
C1534
C1535
C1536
C1542
Engine oil level sensor Ckt Failed High
C1543
Engine oil level sensor Ckt Failed Low
C1548
40
Injector Sol Driver 7 Below Normal
C1549
40
C1551
40
C1552
40
C1553
40
C1554
40
C1555
40
SM 12071-xD-GB-0
PC8000-6
17 - 39
KOMTRAX Plus
Error
Code
Instruction
Message No.
Display
(Message
Code)
Colour
Code of
Top
Message
Acoustic Signal
C1556
40
C1557
40
31
ECM Critical Internal Failure
C1618
C1619
C1622
Int Man Press 2 Below Normal
C1843
Crankcase Press Ckt Failed High
C1844
Crankcase Press Ckt Failed Low
C1845
WIF Indicator Ckt Failed High
C1846
WIF Indicator Ckt Failed Low
C1847
Engine Coolant Temp Exception
WIF Indicator Above Normal
Engine Oil Change Interval Exceeded
C1597
C1638
C1852
0 = RED
1 = YELLOW
2 = GREEN
40
31
C1891
Memory
G = Shovel
C = Engine
C-Code TIER 2
C1911
31
Inj Rail Pressure Above Normal
C1984
31
Int Man Temp 2 Above Normal
C1985
31
C1986
31
Engine Speed Above Normal
C1992
C2121
32
High Exhaust Temp Cyl 1
C2122
32
C2123
32
C2124
32
C2125
32
C2126
32
C2127
32
C2128
32
C2131
32
C2132
32
C2133
32
17 - 40
PC8000-6
SM 12071-xD-GB-0
KOMTRAX Plus
G = Shovel
C = Engine
0 = RED
1 = YELLOW
2 = GREEN
Display
Acoustic Signal
Memory
Colour
Code of
Top
Message
Instruction
Message No.
Error
Code
C2134
32
C2135
32
C2136
32
C2137
32
C2157
32
Rapid Rise Int Man Temp 2
C2158
32
C2159
32
(Message
Code)
C-Code TIER 2
C2185
Sensor Supply 4 Ckt Above Normal
C2186
Sensor Supply 4 Ckt Below Normal
C2215
40
Fuel Pump Pressure Below Normal
C2261
31
Fuel Pump Del Pressure Above Normal
C2262
40
Fuel Pump Del Pressure Below Normal
C2265
Lift Pump Supply Ckt Failed High
C2266
Lift Pump Supply Ckt Failed Low
C2311
Fuel Injection Valve Ckt Error
C2321
Engine Crankshaft Speed - Data Erratic
C2322
Engine Camshaft Speed - Data Erratic
C2377
Fan Control Ckt Failed High
C2474
Turbocharger 1 Speed - Data Erratic
C2693
33
Engine Coolant Temp Above Normal
C2694
33
C2697
Accelerator pedal idle validation Ckt failed
C2727
J1939 between Parent and Child Error
Ether Bottle Empty
C2734
SM 12071-xD-GB-0
31
PC8000-6
17 - 41
KOMTRAX Plus
17.3.3 TABLE OF AVAILABLE INSTRUCTION MESSAGES

Message
No.
Instruction Message
Engine stopped because of main Shut-Off

(gate) valve.
- Open the Shut-Off (gate) valve.
- If failure exist further, inform service.
Inform service.
Stop the engine.

- Inform service.
Start blocked because of main Shut-Off

(gate) valve.
- Open the Shut-Off (gate) valve.
Start blocked
- Inform service.
The fire suppression system has been actuated.

- Inform the fire brigade.
- Evacuate endangered persons.
- Fight the fire.
- Inform service.
Bucket motion switched off.

- Inform service.
No 24V at circuit breaker 11F013

Ladder end switch or lock lever contact open

or service arm down or unlock.
10
Emergency shut-down switch was

actuated.
- Unlock before restarting.
11
Engine switched off by

Maintenance Safety Switch
in the engine room.
12
Operate the machine into the parking position.
13
Please wait! No high idle !
14
Enable switch for refilling arm active

15
Load of the batteries too high.

- Inform service.
16
Batteries are not being charged.

- Inform service.
17
Inform service till end of shift and then

press cancel button.
17 - 42
PC8000-6
SM 12071-xD-GB-0
KOMTRAX Plus
Message
No.
Instruction Message
18
Slew ring gear house brake OFF

- Inform service till end of shift and then
19
Travel gear house brake OFF

- Inform service till end of shift and then
20
Inform service and then press cancel button.
21
Hydraulic oil far below operating

temperature !
- Pre-heat hydraulic oil or warm up at
low idle speed and reduced power.
22
Engine runs (starter motor inactive).
23
A fuel reserve only is still in the tank

- Order tanker.
24
Engine shutdown has been actuated from

ground man.
25
Hydraulic oil below operating

temperature.
- Operate with reduced power !
26
Slew ring gear house brake ON
27
Hydraulic oil overheat - engine power derated
28
The VHMS is by-passed.

- Reset by-pass switch.
29
Engine shutdown by keyswitch before proper

engine cool down.
- Before you switch off the engine, cool down
the engine in the low idle for 2-3 minutes.
30
Hydraulic oil far below operating

temperature !
- Pre-heat hydraulic oil or warm up at
low idle speed and reduced power.
31
Continue shift but advise service.
32
Stop engine call service.
33
Derate active, continue to work.

Later shutdown possible.
Inform service.
34
Call service because of shutdown.
35
Interrupt work and inform service about

Speed Derate.
36
Continue work until next PM

(Schedule work for next PM)
37
Switch Testspeed in cab base forces the

engine to run constantly 1800 1/min.
SM 12071-xD-GB-0
PC8000-6
17 - 43
KOMTRAX Plus
Message
No.
Instruction Message
38
If failure exist further, inform service.
39
Inform service
if attachment in defined position.
40
Continue to work and inform service about

Power Derate.
41
Cable Drum at limit.

- Move the shovel in an other direction.
42
Motor overheated. Wait until cooldown.

- If failure exists further, inform service.
43
Switch off and restart motor

44
Switch off and restart motor

(It may be necessary to wait for cool down)
46
Switch off windscreen wiper

and call service.
47
Only upper windscreen wiper!

Inform service.
48
No 24V at circuit breaker 11F013a

49
Only lower windscreen wiper!

Inform service.
50
Reverse travel cut out by

cable drum.
51
Cable drum-motor temperature

too high.
Allow motor to cool down.
52
Permanently switch off by

device overheating.
Inform service.
53
Temporary switch off by

heating-air overheating.
Inform service.
54
Wait during one minute after

last start of motor.
55
Risk of collision with the cable drum!
56
Key switch off and back on !
57
Cool down period !
58
Travel gear house brake ON
17 - 44
PC8000-6
SM 12071-xD-GB-0

Codes PC8000

Uploaded by

Copyright:

Available Formats

Codes PC8000

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Codes PC8000

Uploaded by

Copyright:

Available Formats

KOMTRAX Plus

Tables of all Provided Messages

17.3 TABLES OF ALL PROVIDED MESSAGES

For excavator PC8000-6 with MTC controller, including optional equipment

For Diesel engines QSK60 with Emission Standard TIER 2,

Y = an acoustic signal sounds if the relating error occurs

The error or message is saved in a History Memory:

Text of the G-type or C-type Error Code or Message

Tables of all Provided Messages

17.3.1 TABLE OF G-CODES

Trouble Shut-Off (gate) valve

Test speed 1800 1/min engine 1

Trouble pump controller

Low hydraulic oil level

Test speed 1800 1/min engine 2

Trouble hydraulic oil level

Central lubrication system grease level too low

Slew ring gear lubr. system grease level too low

Trouble Shut-Off (gate) valve (Start blocked)

Set engine to low idle

Trouble totally loss gear oil (PTO 1)

Trouble totally loss gear oil (PTO 2)

Trouble monitoring, engine 2 speed too low

Trouble monitoring, engine 2 speed too high

Actuate engine speed selector switch

Emergency shut-down pump compartment

Trouble monitoring screen at hydr. cooler entry

Trouble output short-circuit

Trouble emergency safety circuit

Reset emergency safety circuit

Monitoring idle position cut off

Fire in the power house

Trouble monitoring, engine 1 speed too low

Trouble monitoring, engine 1 speed too high

Trouble monitoring hydraulic oil temp

Trouble monitoring hydraulic oil level

Tables of all Provided Messages

Very low hydraulic oil level

Trouble hydraulic oil temperature

Trouble battery voltage too high

Trouble gear lubrication (PTO 2)

Trouble monitoring oil temperature gear (PTO 1)

Trouble oil temperature gear (PTO 1)

Trouble gear lubrication (PTO 1)

Trouble lubrication system

Trouble monitoring oil temperature gear (PTO 2)

Trouble oil temperature gear (PTO 2)

Trouble monitoring pressure oil cooler 2

Stop all movements for low idle

Trouble power supply

Pilot control cut out

Emergency shut-down at access ladder

Emergency shut-down at valve block

Emergency shut-down at hydraulic control panel

Emergency shut-down in cabin

Pilot control cut out

Emergency shut-down at counterweight

Trouble power supply

Maintenance safety switch