Pressure Switch Prince 901

PRESSURE SWITCHES
Prince
z
LOW COST
WEATHERPROOF
SERIES
HIGH REPEATABILITY z SPRING OPPOSED z BELLOWS z COMPACT z

z
TAMPER PROOF SETPOINT ADJUSTMENT z
PRINCE 901 IN GH ENCLOSURE
This compact version in Switzer series 900 Pressure

Switches using components of high reliability is
specifically designed for OEMs.
The sensing element is a hydraulically formed
seamless Phosphor Bronze or Stainless Steel
Bellows mounted external to the weatherproof
switch housing.
The mechanical movements are restricted to absolute

minimum which ensures long term stability.
Style GH Pressure Die Cast Aluminium housing is
best suited for harsh and outdoor mountings.
The instrument is suitable for air, gas, water, steam, oil
and several other chemicals which are compatible to
Copper alloys and Stainless Steel.
GENERAL SPECIFICATIONS
Enclosure
Aluminium pressure die cast

weatherproof to IP:66
Repeatability
0.5% FSR
Range Setting
External with lock
Ranges
Vacuum to 35 bar, several

standard ranges. Refer Ordering
Matrix (Note 2 & 3)
Differential
SPDT Switch (Notes 4 & 5)

Fixed : within 6%
Narrowband adjustable : 6 to 20%
Wideband adjustable : 10 to 60%
15A, 250V AC
Sensor / Wetted Parts
Phosphor Bronze Bellows with

Brass connector or 316 LSS
Bellows with 316 SS connector
Process Connection
1/4" NPT(F) standard. Adaptors

for other threads optional
Maximum Fluid
Temperature
110C for Phosphor Bronze

Bellows, 170C for SS Bellows
(Note 1)
2 SPDT Switch (Notes 4, 5 & 6)
Fixed : 10%
Narrowband adj. : 10 to 20 %
Wideband Adjustable : 15 to 60%
Switching
Switch Rating
Instrument quality snap acting

microswitch.
(Note 7)
Ambient Temperature
()10 to 60C
Electrical Connection
3/4" ET Nylon Cable gland for

8 mm OD cable, standard
Metallic double compression
Cable Gland optional.
Mounting
On-line / Wall
Weight
600 Gms.
ORDERING MATRIX
NOTES
1.
HOUSING
Al. Pr. die cast weatherproof to IP:66 GH
Accuracy and repeatability are same for a Pressure Switch, which

is a switching device and not a measuring instrument.
2.
Select working range of the instrument such that the set pressure
lies between 35% to 70% of range span.
ON-OFF DIFFERENTIAL
Fixed 901
Narrowband Adjustable 902
Wideband Adjustable 903
3.
On and off settings should not exceed the upper or lower range
value.
4.
Switching differentials are at midscale and will vary with range

setting and operating conditions.
5.
A pressure switch is a switching device and not a measuring

instrument eventhough it has a scale to assist setting. For this
reason, Test Certificates will not contain individual ON-OFF
switching values at different scale readings. Maximum differential
obtained alone will be declared, besides other specifications.
6.
DPDT action is achieved by 2 SPDT switches synchronised to

practical limits i.e., 2% of FSR.
Example
GH
901
MATERIAL OF SENSOR AND WETTED PARTS

Phosphor Bronze Bellows with Brass connector 1
316L SS Bellows with 316 SS connector 2
RANGE
Range (in bar)

()1 to
0.2 to
0.4 to
0.7 to
1.0 to
1.6 to
4.0 to
8.0 to
7.0 to
MWP (in bar)
Contact life of microswitches are 5

10 5 switching cycles
for nominal load. To quench DC sparks, use diode in parallel
with inductance, ensuring polarity. A RC network is also
recommended with R value in Ohms equal to coil resistance
and C value in micro Farads equal to holding current in
Amps.
4 V
9 A
9 B
18 C
18 D
25 E
36 F
36 G
52 H
0
1.6
4
7
10
16
25
32
35
7.
Higher process temperatures can be brought down by using

longer
pressure piping. Ask for piping nomogram # 4411844.
Ensure that impulse pipework applies no stress on sensing
element housing and use spanners to hold pressure port
housing when connections are made.
ONLY with 316L SS Bellows with 316 SS connector

SWITCH CODE
SPDT, 15A, 250V AC 3
2 SPDT, 15A, 250V AC 33
DC Rating Resistive: 0.5A 110V / 0.25A 220V / 8A 24V
Inductive:
0.2A 110V / 0.10A 220V / 7A 24V
8.
Style GH is weatherproof only if all entries and joint faces

are properly sealed.
9.
A more versatile and wide range of Pressure & Differential

Pressure Switches are available in Series 200, 020, 300, 931 & S20/
920 Series upto 600 bar.
10. Accuracy figures are exclusive of test equipment tolerance

on the claimed values.
11. All performance data guaranteed 5%.
MOUNTING DIMENSIONS
GH 902
GH 901 / 903
115
104
24
RANGE ADJ.
SEAL C AP FOR
DIFFL. ADJ. SCREW
36
24
81 90
3/4" ET NYLON
CABLE GLAND
482
4.2 FIXING
HOLES 4 NOS.
1/4" NPTF
PROCESS
CONNECTION
35
SENSING
ELEMENT
(BELLOWS)
DIMENSION 48 WILL BE 38
FOR CERTAIN RANGES
23
All dimensions are in mm
This is not a contractual document. Prior notification of changes in specifications is impracticable due to continuous improve
FOR SWITZER'S OFFICES IN INDIA

CHECK AT:
http://www.switzerprocess.co.in/offices.htm
ment
# 0810 Prince 900 Rev.32
MOUNTING
LUGS

Pressure Switch Prince 901

Uploaded by

Copyright:

Available Formats

Pressure Switch Prince 901

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pressure Switch Prince 901

Uploaded by

Copyright:

Available Formats

PRESSURE SWITCHES

HIGH REPEATABILITY z SPRING OPPOSED z BELLOWS z COMPACT z

TAMPER PROOF SETPOINT ADJUSTMENT z

PRINCE 901 IN GH ENCLOSURE

This compact version in Switzer series 900 Pressure

The mechanical movements are restricted to absolute

Aluminium pressure die cast

External with lock

Vacuum to 35 bar, several

SPDT Switch (Notes 4 & 5)

Sensor / Wetted Parts

Phosphor Bronze Bellows with

1/4" NPT(F) standard. Adaptors

110C for Phosphor Bronze

2 SPDT Switch (Notes 4, 5 & 6)

Instrument quality snap acting

3/4" ET Nylon Cable gland for

Accuracy and repeatability are same for a Pressure Switch, which

Switching differentials are at midscale and will vary with range

A pressure switch is a switching device and not a measuring

DPDT action is achieved by 2 SPDT switches synchronised to

MATERIAL OF SENSOR AND WETTED PARTS

Range (in bar)

MWP (in bar)

Contact life of microswitches are 5

Higher process temperatures can be brought down by using

ONLY with 316L SS Bellows with 316 SS connector

Style GH is weatherproof only if all entries and joint faces

A more versatile and wide range of Pressure & Differential

10. Accuracy figures are exclusive of test equipment tolerance

All dimensions are in mm

FOR SWITZER'S OFFICES IN INDIA

You might also like