PCM Analyzer
PCM Analyzer
PCM Analyzer
(G.703) Testing
Application Note:
Summary
This application note describes
the procedure for performing a bit
error rate (BER) test on unframed
data carried over G.703
interfaces, using HDB3 or AMI
line codes.
G.703 port [23] and the receive G.703 port [22] on the rear
of the instrument.
2048kbit/s HDB3/AMI
LTE
NETWORK
Rx/Tx
75/120
Monitor point
Rx/Tx
75/120
Histograms
To obtain softkey labels whilst viewing a Histogram, press
<Keys>. Note that the softkeys still operate even when the
labels are not displayed, but the <Reset> and <Stop>
softkeys require two key presses; one to display the labels,
the next to action the softkey function. This is to prevent
accidental termination of the test.
To change to a different resolution of Histogram use
<Hours>, <Days>, <Mins> as appropriate.
Printing Results
E/10.97/D4/823/5