SI 3TF0A 001 00 Eng - v1 - m56577569830732611
SI 3TF0A 001 00 Eng - v1 - m56577569830732611
SI 3TF0A 001 00 Eng - v1 - m56577569830732611
Cassette sprocket
Model No.
Sprockets marked by
are secured.
WARNING
Check that the wheels are fastened securely before riding the bicycle. If the wheels are
loose in any way, they may come off the bicycle and serious injury may result.
Obtain and read the service instructions carefully prior to installing the parts. Loose,
worn or damaged parts may cause the bicycle to fall over and serious injury may occur as
a result. We strongly recommend only using genuine Shimano replacement parts.
Read these Technical Service Instructions carefully, and keep them in a safe place for
later reference.
Note
Do not use the CS-4600 in any combination other than with the 10-speed super narrow
chain. Other chains cannot be used as the sizes do not match.
An 11T and a 12T lock ring are available for use with the CS-4600. Use whichever lock
ring matches the sprocket configuration.
If the wheel becomes stiff and difficult to turn, you should lubricate it with grease.
Do not apply any oil to the inside of the hub, otherwise the grease will come out.
You should periodically wash the sprockets in a neutral detergent and then lubricate them
again. In addition, cleaning the chain with neutral detergent and lubricating it can be a
effective way of extending the useful life of the sprockets and the chain.
If the chain keeps coming off the sprockets during use, replace the sprockets and the
chain.
Parts are not guaranteed against natural wear or deterioration resulting from normal use.
For maximum performance we highly recommend Shimano lubricants and maintenance
products.
CS-4600
Sprocket tooth
configuration
11T - 25T
11T, 12T, 13T, 14T, 15T, 17T, 19T, 21T, 23T, 25T
12T - 28T
12T, 13T, 14T, 15T, 17T, 19T, 21T, 23T, 25T, 28T
12T - 30T
12T, 13T, 14T, 15T, 17T, 19T, 21T, 24T, 27T, 30T
12T - 28T
12T - 30T
11T - 25T
A
ac -14T
Lock ring
SI-3TF0A-001
FH-4600
Freehub
Lock ring
Tightening torque:
30 - 50 Nm {261 - 434 in. lbs.}
Specifications
Lock ring
TL-LR15/LR10
Tool
(TL-SR21)
Disassembly
Freehub
FH-4600
Model No.
Gears
10
32 / 36
130 mm
Freewheel body
Disassembly
Note:
Do not attempt to disassemble the freewheel body,
because it may result in a malfunction.
Assembly
Freewheel body washer
Tightening torque:
35 - 50 Nm {305 - 434 in. lbs.}
10 mm Allen key
(TL-WR37)