Format of The Report For De-2 (A)
Format of The Report For De-2 (A)
Format of The Report For De-2 (A)
Chandkheda, Ahmedabad
Affiliated
(Name of Institute)
A Report On-
(TOPIC)
Under subject of
DESIGN ENGINEERING 2A
B. E. III, Semester V
(XXXXXX Branch)
Submitted by:
Group:
Sr.
Name of student
Enrolment No.
1.
2.
3.
4.
Academic year
(2015-2016)
Institute
Logo
Here
Common Instructions:
Contents:
Note: Content may vary as case to case basis.
1. Introduction
If you have carry forwarded the project from second year, describe briefly about your
domain and journey for 3rd and 4th semester part.
If you have selected new domain in 5th semester, then you need to give details of
newly selected domain in 5th semester and describe in detail about the same.
2. Literature Review/Secondary Research
For the detail design part, students need to find out literature and learn some of the
aspects as identified in the LNM
3. Design Considerations for detail design part:
3.1 Design for Performance, Safety and Reliability
3.2 Design for Ergonomics and Aesthetics
3.3 Design for Manufacturability & Assembly (DFMA)
3.4 Design for Cost, Environment
4. Design Calculation
It may include size & shape specifications, tolerances, material requirement,
standards/safety rules/govt. policies, sketches, detail & assembly drawings, list of
components with specifications etc.) These all aspects are case sensitive so one can
add/remove some aspects from the list. (For CE, IT other soft branches/ EC, IC
circuit branches, one may also use Flow chart, Block diagrams, Algorithms,
Programming, Circuit diagrams etc.)
Relate your Design calculation with improvement of Design Consideration
mentioned in Contents 3.
Students need to describe or show the whole process of design calculation in detail.
For example: If your solution/part contain size of 25.10 mm then students are need to
give justification why they are taking 25.10 mm and not 25.25 mm or likewise. If it
contains curvature then you need to explain details of considering curvature. In short,
you need to describe every single features and aspects for your detail design part.