Piping FG Smith Fiberglass
Piping FG Smith Fiberglass
Piping FG Smith Fiberglass
B2101
October 1, 2007
Time-Tested
Fiberglass Primary Piping and
Secondary Containment Piping for
Underground Fuel Installations
T h i r t y Ye a r
W a r r a n t y *
With over 40
years proven
performance in
the marketplace,
Underwriters
Laboratories, Inc.
and Underwriters Laboratories
Canada (UL/ULC) Listed RED
THREAD IIA pipe, fittings and
adhesive carry a 30-year warranty.
The product is warranted to be
free from defects in material and
workmanshipand against internal
and external corrosionwhen used
for underground transportation of
fuels.
O u t s t a n d i n g C o r r o s i o n
Resistance RED THREAD IIA
piping systems resist internal and
external corrosion from hazardous
soils, fuels and other corrosive
fluids.
Quality Assurance FGS
Smith Fibercast quality assurance
procedures meet or exceed the
test requirements of UL/ULC.
Permeability RED THREAD
IIA permeability resistance
greatly exceeds UL allowable
permeability.
2004 UL 971:
Primary - 1 gm/m2/day
Leak Prevention Sump (0.053 gal/100 ft. of 2 pipe,
entry/termination fittings provide 30 days)
2
positive seal at the sump to help Secondary - 4 gm/m /day
prevent leaking of underground (0.213 gal/100 ft. of 2 pipe,
fuel in or out of the sump. This 30 days)
fitting also helps provide Class 1995 UL 971: 2
I (leak prevention) protection Primary - 4 gm/m /day
which complies with Californias (0.213 gal/100 ft. of 2 pipe,
r e q u i r e m e n t f o r c o n t i n u o u s 30 days)
2
interstitial monitoring of the piping Secondary - 24 gm/m /day
(1.278 gal/100 ft. of 2 pipe,
systems secondary containment.
30 days)
Exceptional
Flow
C h a r a c t e r i s t i c s - Tw o - i n c h
RED THREAD IIA pipe has the
largest I.D. (2.235) in the fueling
industryallowing you to sell twice
the fuel per foot than any 1 1 / 2
flexible product on the market.
Three-inch RED THREAD IIA
Old vs New - Pipe in the foreground was
fiberglass pipe has a nominal 3.36 installed in 1973 and removed 27 years
I.D.; four-inch pipe has a 4.36 I.D. later when the station closed.
*Please review FGS Smith Fibercasts written warranty to determine the terms and conditions.
Literature available:
B2101 - General Brochure
B2102 - RT IIA Specifications
B2160 Installation Instructions
B2161 Installation Checklist
Fittings
Fittings
2005,
National Oilwell Varco
UL Listed
RED THREAD Pipe 1968
UL/ULC Listed
RED THREAD II Pipe
1984
Smith Fibercast Fiberglass Fuel Piping Systems
System
F6624 B2102 Power Tool
F6625 B2100 Power Tool
P r o v e n J o i n i n g S y s t e m F6600 Manual Tapering Tool
Lightweight RED THREAD IIA
pipe is joined with the proven
Case History
T.A.B. (Threaded and Bonded)
History
or Bell and Spigot joint which
promotes fast, positive make-up
and prevents backout problems UL/ULC Listed RED THREAD
during cure time. These features IIA fiberglass primary piping
assist the installer and assure is available in 2, 3 and 4
economical installation.
diameters; secondary containment
piping is available in 3 and 4
Reliability FGS Smith containment pipe. Containment
Fibercast fiberglass piping is fittings are rated to 50 psig in 3-4
designed and manufactured sizes.
to meet the requirements of Non-UL Listed containment piping
governmental environmental is available in 6 - 16 diameters.
regulations, including EPA. As an Containment fittings are rated to
example of this reliability, Smith 20 psig in 6 sizes. Other items
Fibercast RED THREAD IIA piping contained in this bulletin may not
has never been removed because be UL/ULC Listed. Contact your
of fuel incompatibility.
regional manager or representative
for more information.
Easy, Economical Installation
For a complete
supplied on primary piping
catalog, CD, case UL/ULC Listed
Fiberglass Fuel
Piping Systems
histories
describing
inserts
real-life RED THREAD IIA
application success stories,
f
and MSDS please fax your
life
request to 501-568-6836 or
visit our web site at
www.smithfibercast.com.
available
UL/ULC Listed
RED THREAD IIA Pipe
1990
This product was UL Listed as
Nonmetallic Underground Piping for Petroleum Products,
Alcohols and Alcohol/Gasoline
Mixtures.
Part Number
Pipe Length
(ft.)
(In.)
mm
50
011020-069-1
15
50
011020-069-2
22-25
50
011020-069-3
80
011030-069-1
80
Part Number
Pipe Length
(ft.)
80
011030-069-4
15
80
011030-069-5
22-25
26-30
80
011030-069-6
26-30
15
100
011040-077-5
15
011030-069-2
22-25
100
011040-069-5
22-25
80
011030-069-3
26-30
100
011040-077-6
26-30
100
011040-071-1
15
150
011060-120-5
15
100
011040-069-2
22-25
150
011060-120-4
22-25
100
011040-071-3
26-30
150
011060-120-6
26-30
(In.)
mm
DIMENSIONAL DATA
Nominal
Wall
Thickness
(In./mm)
Thickness
(In./mm)
Nominal
Weight
(lbs./ft./kg-m)
Pressure/
Temperature
Max. Rating
Mill Test
Pressure
(psig/MPa)
2.375
.070
0.5
Nominal
Nominal Nominal
Pipe
I.D.
O.D.
Size (In./
(In./mm) (In./mm)
mm)
2
2.235
75F/24C
150F/66C
375
85
80
50
57
61
1.78
0.74
2.59
.57
.55
3.360
3.500
.070
0.7
300
36
34
80
85
90
2.54
1.04
2.07
.25
.23
4.360
4.560
.085
1.2
265
34
30
100
111
116
2.16
1.79
1.83
.23
.21
PROPERTY
Axial Tensile (ASTM D2105)
Ultimate Stress
Design Stress
Modulus of Elasticity
Axial Compression (ASTM D695)
Ultimate Stress
Design Stress
Modulus of Elasticity
Beam Bending (SFPTM)
Ultimate Stress
Design Stress(4)
Modulus of Elasticity
(Long Term per ASTM D2925)
Hydrostatic Burst (ASTM D1599)
Ultimate Hoop
Tensile Stress
Hydrostatic Design (ASTM D2992)
Procedure A
Cyclic 150 x 106
Cycles
Coefficient of Linear
Thermal Expansion (SFPTM)
Specific Gravity
Flow Factor
Hazen-Williams Coefficient
External Pressure
Max. Rating
(psig/MPa)
psi @ 75F
10,300
2,575
1.82 x 106
71.0
17.8
12548
8,200
2,050
1.42 x 106
56.5
14.1
9791
33,300
8,300
1.26 x 106
230.0
57.2
8687
25,600
6,400
.89 x 106
177.0
44.1
6136
23,000
2,900
2.18 x 106
159.0
20.0
15031
19,200
2,400
1.70 x 106
132.0
16.5
11721
34,000
2-3
9,410(5)
4-6
13,040(6)
234
39,200
2 & 3
2 & 3
64.9(5)
7,400(7)
4-6
4-6
89.9(6)
10,450
0.88 x 10-5 in./in./F
1.58 x 10-5mm/mm/C
1.8
150
271
2 & 3
51(8)
4-6
72.1
75
110
140
204
2 90 ELBOW
012020-360-4
3 90 ELBOW
012030-360-4
4 90 ELBOW
012040-360-4
2 FLANGE
012020-170-4
3 FLANGE
012030-170-4
4 FLANGE
012040-170-4
A
(In./mm)
33/8
86
45/8
117
51/8
130
B
(In./mm)
21/4
54
25/8
67
25/8
67
SLEEVE COUPLING,
belled ends
012020-310-4
3 45 ELBOW
012030-310-4
4 45 ELBOW
012040-310-4
Nominal
Pipe Size
(In./mm)
2
50
3
80
4
100
2 45 ELBOW
C
(In./mm)
3/4
19
13/8
35
13/8
35
D
(In./mm)
43/4
121
6
152
71/2
191
E
(In./mm)
3/4 D-4 Holes
19 D-4 Holes
3/4 D-4 Holes
19 D-4 Holes
3/4 D-4 Holes
19 D-4 Holes
2 TEE
012020-410-4
3 TEE
012030-410-4
4 TEE
012040-410-4
F
(In./mm)
25/8
67
33/4
95
37/8
98
O
(In./mm)
6
152
71/2
191
9
229
X1(1)
(In./mm)
13/8
35
15/8
41
11/2
38
X2(1)
(In./mm)
11/2
38
17/8
48
17/8
48
NIPPLE
END CAP*
2 SLEEVE COUPLING
012020-101-8
2 X 4
012020-004-5 3 x 6
012030-006-5
3 SLEEVE COUPLING
012030-101-8
2 x 6
012020-006-5 3 x 8
012030-008-5
4 SLEEVE COUPLING
012040-101-4
2 x 8
012020-008-5 3 x 10
012030-010-5
2 x 10
012020-010-5 3 x 12
012030-012-5
2 x 12
012020-012-5 4 x 6
012040-006-4
2 END CAP
012020-180-4
End Cap
Nipple (Overall Length A)
Nominal Sleeve Coupling
Pipe Size
A
X1(1)
A
X1(1)
4
6
8
10
12
(In./mm) (In./mm) (In./mm) (In./mm) (In./mm) 101.6mm 152.4mm 203.2mm 254.0mm 304.8mm
2
6
21/8
23/4
13/8
_
50
152
54
70
35
_
_
_
3
6
23/8
_
_
_
80
152
60
_
_
_
7
4
7
2 /8
_
_
_
100
178
73
* Available 2 only.
Available from stock
4 x 8
012040-008-4
4 x 10
012040-010-4
4 x 12
012040-012-4
Bell x Male
Spigot x Male
Bell x Female
Spigot x Female
2 BxM
012020-191-4
2 SxM
012020-192-4
2 BxF
012020-194-4
2 SxF
012020-195-4
3 BxM
012030-191-4
3 SxM
012030-192-4
3 SxF
012030-194-4
3 SxF
012030-195-4
4 BxM
012040-191-4
4 SxM
012040-192-4
4 BxF
012040-194-4
4 SxF
012040-195-4
Bell x Male
Nominal
Pipe Size
(In./mm)
A
(In./mm)
Spigot x Male
B
(In./mm)
(In./mm)
A
(In./mm)
B
(In./mm)
41/4
13/8
35/8
50
108
51
35
92
51/2
15/8
45/8
80
140
76
41
117
51/2
11/2
47/8
100
140
102
38
124
REDUCER BUSHING
2 x 1
012020-233-4
FEMALE NPT
012020-232-4
012020-231-4
3 X 2
RED. BUSHING
012030-231-4
4 X 3
RED. BUSHING
012040-231-4
11/4
A
(In./mm)
(In./mm)
A
(In./mm)
B
(In./mm)
31/2
13/8
37/8
21/8
51
89
35
98
54
41/2
15/8
43/4
31/8
76
114
41
121
79
41/2
11/2
47/8
41/8
102
114
38
124
105
2 x 11/2 SADDLE
A
(In./mm)
X(1)
(In./mm)
2x1
50 x 25
1
44
*
*
2 x 1
50 x 32
2
51
*
*
2 x 1
50 x 40
1
44
*
*
3x2
80 x 50
2
57
1
38
4x3
100 x 80
2
60
1
48
(2)
012020-516-4
A
(In./mm)
B
(In./mm)
X(1)
(In./mm)
2 x 1
50 x 40
2
73
4
102
1
35
Spigot x Female
X(1)
SADDLE
FEMALE NPT
2 X
Bell x Female
X(1)
DOUBLE WALL
SUMP ENTRY/TERMINATION FITTING
3 BONDED FITTING
012030-626-0
4 BONDED FITTING
012040-626-0
Nominal
Pipe Size
(In./mm)
A
(In./mm)
B
(In./mm)
C
(In./mm)
3 (3 X 2)
6.88
4.00
4.00
80 (80 x 50)
175
102
102
4 (4 X 3)
6.88
4.00
5.00
175
102
127
SINGLE WALL
SUMP ENTRY/TERMINATION FITTING
2 BONDED FITTING
012020-622-0
3 BONDED FITTING
012030-622-0
4 BONDED FITTING
012040-622-0
In.
2
3
4
In.
6
6
6
In.
3
3
3
In.
2 9/16
3 3/4
4 3/4
CONCENTRIC REDUCER
DOUBLE WALL
SUMP ENTRY/TERMINATION FITTING
Sump Wall
Gasket
Lube
Gasket
A
B
Nut
4 X 3 CONCENTRIC REDUCER
012040-238-3
5 X 4 CONCENTRIC REDUCER
012050-238-3
Nominal
Pipe Size
(In./mm)
C
Hole
Dia.
A
(In./mm)
B
(In./mm)
C
(In./mm)
3 (3 X 2)
6.88
4.00
4.00
80 (80 x 50)
175
102
102
4 (4 X 3)
6.88
4.00
5.00
175
102
127
G
(In./mm)
H
(In./mm)
I
(In./mm)
4x3
100 x 80
152
64
64
5X4
125 x 100
178
64
64
Containment Pipe
RED THREAD IIA
Sump Entry/Termination Fitting
Spigot x NPT Adapter or Pipe Nipple
45 ELBOW
90 ELBOW
TEE
3 90 SC ELBOW
012030-360-3
3 45 SC ELBOW
012030-310-3
3 SC TEE
012030-410-3
4 90 SC ELBOW
012040-360-3
4 45 SC ELBOW
012040-310-3
4 SC TEE
012040-410-3
012060-360-9
6 45 SC ELBOW
012060-310-9
6 SC TEE
012060-410-9
6 90 SC ELBOW
TERMINATION FITTING
WITH NPT TAP
SLEEVE COUPLING
Nominal
Pipe Size
(In./mm)
A
(In./mm)
012030-236-3
012040-236-3
B
(In./mm)
C
(In./mm)
012030-235-3
012040-235-3
012060-235-9
D
(In./mm)
E
(In./mm)
F
(In./mm)
G
(In./mm)
14
152
178
356
76
64
64
203
14
100
191
203
356
76
76
64
216
16
11
150
203
229
406
102
102
76
279
THREADED ADAPTER,
bell x male, scarfed O.D.
2 SC SLEEVE COUPLING
012020-101-9
3 SC SLEEVE COUPLING
012030-101-9
4 SC SLEEVE COUPLING
012040-101-9
A
(In./mm)
X(1)
(In./mm)
50
127
54
50
80
152
60
80
100
152
73
100
80
SLEEVE COUPLING,
one-piece, scarfed O.D.
(1)
TERMINATION FITTING
WITHOUT TAP
A
(In./mm)
B
(In./mm)
X(1)
(In./mm)
108
51
35
140
76
41
140
102
38
CROSSOVER TEE
CROSSOVER 45 ELBOW
3 45 SC CROSSOVER
012030-311-3
3 SC CROSSOVER TEE
012030-411-3
4 45 SC CROSSOVER
012040-311-3
4 SC CROSSOVER TEE
012040-411-3
Crossover 45
Nominal
Pipe Size
(In./mm)
A1
(In./mm)
Crossover Nipples
(Overall Length C)
Crossover Tee
A2
(In./mm)
B1
(In./mm)
B2
(In./mm)
6
152.4 mm
8
203.2
80
152
121
178
140
100
191
140
203
162
150
SADDLE
REDUCER BUSHING,
scarfed O.D.
BELLED OUTLET
3x2 SADDLE
012030-511-4
012030-231-7
4x2 SADDLE
012040-521-4
SADDLE
012030-512-4
012040-231-7
4x3 SADDLE
012030-516-4
A
(In./mm)
X
(In./mm)
3x2
11/2
80 x 50
57
38
4x3
17/8
100 x 80
60
48
(1)
CENTRALIZER
2x3 CENTRALIZER
013020-650-3
3x4 CENTRALIZER
013030-651-4
4x6 CENTRALIZER
013040-650-6
3x11/4
4x1 SADDLE
012040-511-4
4x11/4 SADDLE
012040-512-4
4x11/2
012040-516-4
A
(In./mm)
4
102
4
114
5
133
3
89
3
89
3
89
4
102
4
102
4
102
SADDLE
B
(In./mm)
6
152
6
152
6
152
6
152
6
152
6
152
6
152
6
152
6
152
X(1)
(In./mm)
1
35
1
35
1
41
*
*
*
*
*
*
*
*
*
*
*
*
We call our fiberglass reinforced piping systems time tested because they have been proving their durability and value in
harsh environments and unforgiving applications for decades. In fact, were closing in on our 60th anniversary, and some
of our buried fuel-handling installations have been in the ground for almost 40 years.
We offer extensive experience in designing, engineering, manufacturing, fabricating, and installing piping systems for
caustic chemicals, abrasive slurries, hot temperatures, and high pressures - as well as less abusive forms of service.
A long list of firsts includes:
Worlds first composite pipe manufacturer
1st UL Listed non-metallic pipe for fuel handling in 1968
1st manufacturer to be UL/ULC Listed to 2004 UL 971
1st North American pipe manufacturer to earn ISO 9001 certification
1st U.S. pipe manufacturer to achieve API Q1 status
Fiber Glass Systems, L.P. (FGS) combines the resources of Star Fiberglass and Smith Fibercast. With five manufacturing
facilities in North America and two in the Far East, FGS offers a wide range of products to meet most piping needs.
FGS offers the broadest, most comprehensive product selection available. Were the only manufacturer producing
both filament wound and centrifugally cast piping. We market our products through a worldwide network of stocking
distributors.
We are supported by the multi-billion global resources of our parent company, National Oilwell Varco - the leader in highperformance oil field equipment and advanced drilling and well-servicing technologies, with more than 5,000 employees in
49 countries.
On-site installation training is available by FGS field technicians. Free Smith Fibercast piping-design CD-ROM programs
for all markets, including the UL-Listed Fuel Piping markets (with the Success by Design engineering program), are
available.
gle
is
Ax
An
xis
90 A
es
t
sla
n
Tra
Rotation
10
ind
Fiber
Placement
Head
Resin Bath
Fibers (Continuous)
11
INSTALL IT
BURY IT
FORGET IT!
Product Certifications
15LR-0004
LICENSEE
Contact
Fiber Glass
Systems for
licensed products.
It is the policy of Fiber Glass Systems to improve its products continually. In accordance
with that policy, the right is reserved to make changes in specifications, descriptions, and
illustrative material contained in this bulletin as conditions warrant. Always cross-reference
the bulletin date with the most current version listed at www. fiberglasssystems.com or
www.smithfibercast.com. The information contained herein is general in nature and is not
intended to express any warranty of any type whatsoever, nor shall any be implied.
ISO 9001
LITTLE ROCK, AR
SAND SPRINGS, OK
SUZHOU, CHINA