Safety S70 Sample Card 082011
Safety S70 Sample Card 082011
Safety S70 Sample Card 082011
Description
Glass type
Film Type
Visible Light
Transmitted
%
Visible
Light
Reflected
Interior %
No Film
Safety S70
No Film
Safety S70
89
86
53
47
9
9
6
6
No Film
Safety S70
No Film
Safety S70
79
77
47
43
15
16
13
8
Single Pane
Clear
Tinted
Installation
3M Window films are installed using a water and soap solution.
Full adhesion is reached after approximately 20 days at 18C (in dry
conditions).
Cleaning
3M Window films may be cleaned 30 days after installation using
ordinary window cleaning agents and avoiding the use of abrasive
particles. Do not use rough sponges, cloths or brushes. Synthetic
sponges, soft wipes or rubber squeegee cleaners are
recommended.
Tensile
Elongation
Break
Strength
at break
strength
ASTM
ASTM
ASTM
D882-95a
D882-95a D882-95a
N/ 25,4 mm N/25,4 mm N/25,4mm
Tear
Puncture
Resistance Propagation
ASTM
ASTM
D 1938-02 D2582-03
197 N/mm
120 %
79 kg
1,04 kg
2,31 kg
197 N/mm
120 %
79 kg
1,04 kg
2,31 kg
197 N/mm
120 %
79 kg
1,04 kg
2,31 kg
197 N/mm
120 %
79 kg
1,04 kg
2,31 kg
Douple Pane
Clear
Tinted
General notes:
All 3M Safety films have been tested to EN12600 and/or EN356 as appropriate. For detailed information and relevant certification for any specific project, please
contact your local 3M specialist.
All technical data is based on a combination of relevant European test methods and/or US test methods. Before using this product the customer / applicator must
ensure the product is suitable to be used for the intended purpose. If there is any uncertainty, please check with your local 3M Window Film specialist. All issues
regarding warranty and liability for the product and the effect of its use are governed in accordance with the provisions of the appropriate contract of sale unless local
laws dictate otherwise.