Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 111 views

    NDT1 220K Ultrasonic Transducer

    Uploaded by

    Jose Miguel Madrid Reina
    The NDT1-220K is a flexible ultrasonic transducer intended for general non-destructive testing applications like thickness measurement and liquid level detection. It has a center frequency of 3 MHz, bandwidth of 2-6 MHz, low electrical impedance of 30-100 ohms, and is robust and conforms to curved surfaces. The transducer provides good performance and repeatability at a low cost.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    NDT1 220K Ultrasonic Transducer

    Uploaded by

    Jose Miguel Madrid Reina
    111 views4 pages
    The NDT1-220K is a flexible ultrasonic transducer intended for general non-destructive testing applications like thickness measurement and liquid level detection. It has a center frequency of 3 MHz, bandwidth of 2-6 MHz, low electrical impedance of 30-100 ohms, and is robust and conforms to curved surfaces. The transducer provides good performance and repeatability at a low cost.

    Original Description:

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The NDT1-220K is a flexible ultrasonic transducer intended for general non-destructive testing applications like thickness measurement and liquid level detection. It has a center frequency of 3 MHz, bandwidth of 2-6 MHz, low electrical impedance of 30-100 ohms, and is robust and conforms to curved surfaces. The transducer provides good performance and repeatability at a low cost.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    111 views4 pages

    NDT1 220K Ultrasonic Transducer

    Uploaded by

    Jose Miguel Madrid Reina
    The NDT1-220K is a flexible ultrasonic transducer intended for general non-destructive testing applications like thickness measurement and liquid level detection. It has a center frequency of 3 MHz, bandwidth of 2-6 MHz, low electrical impedance of 30-100 ohms, and is robust and conforms to curved surfaces. The transducer provides good performance and repeatability at a low cost.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4
    At a glance
    Powered by AI
    The document discusses the NDT1-220K ultrasonic transducer, including its features, specifications, applications and ordering information.

    Typical properties include a center frequency of 3 MHz, bandwidth of 1.7-4 MHz, Q-factor of 1.3, and impedance of 100 ohms. Specifications include operating temperature range and storage temperature range.

    Applications mentioned include liquid presence/absence detection, thickness measurement, liquid depth measurement, and speed of sound measurement.

    NDT1-220K Ultrasonic Transducer

    Low cost ultrasonic transducer Flexible Format 3 MHz nominal center frequency High Bandwith; Low Q Performance Low Impedance

    The NDT1-220K element offers


    outstanding ultrasonic transducer performance in a low-cost, flexible format for general-purpose use. 3 MHz nominal center frequency, with extremely low Q-factor of 1.3 (air-backed, into PMMA). Electrical impedance is well matched to conventional NDT instrumentation (pulsar/receivers). Unit-to-unit repeatability is very good. The transducer is robust, and conforms perfectly to cylindrical surfaces such as pipe or tank walls. Epoxies, transfer adhesives, or even double-coated tapes may be used as bonding agents.

    Description Dual layer 110 m

    Model No. NDT1-220K

    Part No. 1005935-1

    APPLICATIONS

    FEATURES

    Liquid Presence/Absence (through-wall) Thickness Measurement (solids, elastomers) Liquid Depth (bottom-up) Speed of Sound Measurement Tamper Detection

    High Bandwidth, Low Q Performance Excellent Acoustic Match to Liquids, Polymers Low Electrical Impedance (30 to 100 ohms typ) Lightweight, Robust, Flexible Design Conforms to Flat or Curved Surfaces Low Cost, Disposable Transducers

    Dimensions in Inches [in millimeters]

    A (film) .650 [17]

    B (electrode) .485 [12]

    C (film) 5.51 [140]

    D (electrode) 1.18 [30]

    Connector provides two 0.025" square pins on 0.1" spacing and will mate with a wide range of FFC (flexible flat cable) receptacles.
    NDT1-220K Ultrasonic Transducer Rev 1 www.meas-spec.com 1 of 4 11/06/2008

    NDT1-220K Ultrasonic Transducer


    performance specifications
    NDT1-220K Frequency Response
    0.009 0.008 0.007

    Magnitude (V rms)

    0.006 0.005 0.004 0.003 0.002 0.001 0 0.E+00

    1.E+06

    2.E+06

    3.E+06

    4.E+06

    5.E+06

    6.E+06

    Frequency (Hz)

    Typical properties/specifications

    Typical Properties (at 25 C) Parameter NDT1-220K Units 670 pF @ 1 kHz Capacitance 3 MHz (in PPMA) Center Frequency 1.7 MHz Lower -6 dB Freq 4.0 MHz Upper -6 dB Freq Q-Factor 1.3 (none) Impedance at f(c) 100 ohms Thickness (over length C) 0.30 mm

    Environmental Specifications Storage Temperature Operating Temperature -40 to +80 deg C -20 to +60 deg C

    NDT1-220K Ultrasonic Transducer Rev 1

    www.meas-spec.com 2 of 4

    11/06/2008

    NDT1-220K Ultrasonic Transducer


    examples of typical receiver waveforms
    damping = 0 damping = 5 damping = 10

    Y-axis: 0.2 V/div

    Y-axis: 0.1 V/div

    Y-axis: 10 mV/div

    X-axis 1 s/div, overall system gain: +10 dB (note: transmit pulse amplitude varies according to damping setting). Traces above taken using NDT1-220K element bonded with epoxy resin to nominal 9.5 mm thickness PMMA block.

    examples of applications

    Liquid presence/absence in tank through-wall

    Liquid presence/absence in pipe or cylindrical vessel (high S/N ratio)


    NDT1-220K Ultrasonic Transducer Rev 1 www.meas-spec.com 3 of 4

    Liquid depth in tank (< 3 mm min depth, with polymer tank)


    11/06/2008

    NDT1-220K Ultrasonic Transducer

    The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customers technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.

    ordering information
    North America Measurement Specialties, Inc. 1000 Lucas Way Hampton, VA 23666 Sales and Customer Service Tel: +1-800-745-8008 or +1-757-766-1500 Fax: +1-757-766-4297 Technical Support Email: piezo@meas-spec.com
    NDT1-220K Ultrasonic Transducer Rev 1

    Europe MEAS Deutschland GmbH Hauert 13 44227 Dortmund Germany Sales and Customer Service Tel: +49 (0)231 9740 21 Technical Support Tel: +49 (0)6074 862822 Email: piezoeurope@meas-spec.com
    www.meas-spec.com 4 of 4

    Asia Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518107 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Technical Support Email: piezo@meas-spec.com
    11/06/2008

    You might also like