Msds Sika ViscoCrete 1000
Msds Sika ViscoCrete 1000
Msds Sika ViscoCrete 1000
SikaViscocrete 1000
1.
2. 3.
There are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
OSHA/HCS status
Potential acute health effects Inhalation : May be harmful if inhaled. Ingestion : May be harmful if swallowed. Skin : May cause sensitization by skin contact. Eyes : May cause eye irritation. See toxicological information (section 11)
4.
Inhalation
2. August 2010
1/5
SikaViscocrete 1000
4.
Ingestion
Notes to physician
5.
Fire-fighting measures
: In a fire or if heated, a pressure increase will occur and the container may burst. : Use an extinguishing agent suitable for the surrounding fire. : None known. : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. : Decomposition products may include the following materials: carbon dioxide carbon monoxide : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Flammability of the product Extinguishing media Suitable Not suitable Special exposure hazards
6.
Personal precautions
Environmental precautions
Large spill
Small spill
7.
Handling
2. August 2010
SikaViscocrete 1000
7.
Storage
8.
Consult local authorities for acceptable exposure limits. Engineering measures : No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants. If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits. Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. : Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts. : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Hands
Eyes
Skin
9.
: Under normal conditions of storage and use, hazardous polymerization will not occur.
2. August 2010
3/5
SikaViscocrete 1000
11 . Toxicological information
Potential chronic health effects Chronic effects : Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels. Acute toxicity Conclusion/Summary : Not available.
12 . Ecological information
Environmental effects : No known significant effects or critical hazards.
13 . Disposal considerations
Waste disposal : The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any byproducts should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Disposal should be in accordance with applicable regional, national and local laws and regulations. Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION for additional handling information and protection of employees.
14 . Transport information
Regulatory information DOT Classification TDG Classification ADR/RID Class IMDG Class IATA-DGR Class PG* : Packing group UN number Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. Proper shipping name Classes PG* Additional information -
15 . Regulatory information
U.S. Federal regulations : United States inventory (TSCA 8b): All components are listed or exempted. SARA 302/304/311/312 extremely hazardous substances: No products were found. SARA 302/304 emergency planning and notification: No products were found. SARA 302/304/311/312 hazardous chemicals: No products were found. SARA 311/312 MSDS distribution - chemical inventory - hazard identification: No products were found. : All components are listed or exempted.
2. August 2010
4/5
SikaViscocrete 1000
16 . Other information
Hazardous Material Information System (U.S.A.) : Health Flammability Physical hazards Personal Protection Equipment 2 0 0 B
Caution: HMIS ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS ratings are to be used with a fully implemented HMIS program. HMIS is a registered mark of the National Paint & Coatings Association (NPCA). HMIS materials may be purchased exclusively from J. J. Keller (800) 327-6868. The customer is responsible for determining the PPE code for this material. Date of printing : 02.08.2010. : 02.08.2010. Date of issue Date of previous issue : No previous validation. Version : 1 Indicates information that has changed from previously issued version. Notice to reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika") product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or 201-933-8800.
2. August 2010
5/5