NIC Components NRE-HW Series
NIC Components NRE-HW Series
NIC Components NRE-HW Series
Load Life Test at Rated W.V. Capacitance Change Within ±25% of initial measured value
+105°C 2,000 Hours: 10φ & Up Tan δ Less than 200% of specified maximum value
+105°C 1,000 Hours: 8φ Leakage Current Less than specified maximum value
Shelf Life Test
Shall meet same requirements as in load life test
+85°C 1,000 Hours with no load
STANDARD PRODUCT AND
CASE SIZE TABLE Dφ x L (mm) LEAD SPACING AND DIAMETER (mm)
Cap Working Voltage (Vdc) Case Dia. (Dφ) 5 6.3 8 10 12.5 16 18
Code Lead Dia. (dφ) 0.5 0.5 0.6 0.6 0.6 0.8 0.8
(μF) 160 200 250 350 400 450
0.47 R47 5x11 5x11 5x11 6.3x11 6.3x11 - Lead Spacing (F) 2.0 2.5 3.5 5.0 5.0 7.5 7.5
1.0 1R0 5x11 5x11 5x11 6.3x11 8x11.5 8x12.5 Dim α 0.5 0.5 0.5 0.5 0.5 0.5 0.5
2.2 2R2 6.3x11 6.3x11 6.3x11 8x11.5 8x11.5 10x16 β = L < 20mm = 1.5mm, L > 20mm = 2.0mm
3.3 3R3 6.3x11 6.3x11 8x11.5 8x12.5 10x12.5 10x20
4.7 4R7 6.3x11 8x11.5 8x11.5 10x12.5 10x16 12.5x20 Insulation Sleeve dφ ± 0.05
Polarity Marking
10 100 8x11.5 8x12.5 10x12.5 10x20 10x20 12.5x25
22 220 10x12.5 10x16 10x20 12.5x25 12.5x25 16x25 F ± 0.5
33 330 10x20 10x20 12.5x20 16x25 16x25 16x31
47 470 12.5x20 12.5x20 12.5x25 16x31 16x31 18x36
68 680 12.5x20 12.5x25 16x25 16x36 18x36 18x41 L + β max. 15mm Min. 4mm Dφ ± α
Min.
16x31.5
82 820 12.5x25 - 18x35.5 18x41 -
18x25 Drawing is representative of parts as supplied in bulk or
100 101 12.5x25 16x25 16x36 18x41 - - straight lead format, please see taping specification for
150 151 16x31 16x36 18x36 - - - details on taped format packaging.
220 221 16x36 18x36 - - - -
330 331 18x41 - - - - -
W 11.5 min.
0
W1 9.0 ±0.5
W2 0 ~ 2.5 1max
H 16.0 ±0.5
0
I 1.0 max.
D φ 4.0 ±0.2
0
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
t
STANDARD RADIAL TAPING (5mm LEAD SPACING, STRAIGHT LEADS) TB
Taping Dimensions (mm)
Case Dia.
10 12.5
(Dφ)
Case Size Δh
All All
Dim.
dφ ±0.05 0.6 0.6
H ±0.75 19.0 19.0
F +0.8 ~ -0.2 5.0 5.0
P ±1.0 25.4* 1max
P0 12.7 ±0.2
P1 3.85
P 6.35 ±1.0
2
W 18.0 ±0.5
W0 11.5 min
W
1
9.0 ±0.5 P2 t P
W 0 ~ 2.5
2
H
0 16.0 ±0.5 ∅D
I 1.0 max.
D φ 4.0 ±0.2 w2 P1
0 F ∅d H
Δh 0 ±1.0 (at top of can)
W1
t 0.7 ±0.2 (not including lead) w w0
*Optional Taping Specifications
10mm diameter available with P dim. = 12.7mm
(P/N Suffix: TB12.7MMP)
0
P0 S ∅ D0
12.5mm diameter available with P dim. = 15mm, P1= 5.0mm,
P0 = 15.0mm & P2 = 7.5mm (P/N Suffix: TB15MMP)