NIC Components NSWC High Voltage Series
NIC Components NSWC High Voltage Series
NIC Components NSWC High Voltage Series
Case Sizes
SPECIFICATIONS
1913 2416 2420
Capacitance Range 0.001 ~ 0.015µF 0.012 ~ 0.068µF 0.027 ~ 0.12µF
Voltage Ratings 250Vdc
Capacitance Tolerance ±5%(J)
Temperature Range -55°C ~ +85°C
Dissipation Factor 1.0% max. @ 1KHz
Insulation Resistance (20°C)
3 Gigohms @ 100Vdc
Through 2K Ohm Resistor
Dielectric Withstanding
150% of Rated Voltage
Voltage
Temperature Characteristic ±3% ∆C Maximum Over Temperature Range
Dielectric Absorption 0.05 ~ 0.10% Typical
ENVIRONMENTAL CHARACTERISTICS
Capacitance Change Within ±1%/-6% of Initial Value
Life Test At +85°C
Dissipation Factor 1.1% Maximum
1,000 Hours at 125% of Rated Voltage
Insulation Resistance 1 GigΩ Minimum
Capacitance Change Within ±5% of Initial Value
Resistance to Soldering Heat:
Dissipation Factor 1.1% Maximum
+240°C Peak
Insulation Resistance 1 GigΩ Minimum or 300Ω/F whichever is lower
Capacitance Change (1) +8%/-5%
Humidity Load Life (90 ~ 95% RH)
Dissipation Factor (1) ±1.5%
1,000 Hours, +40°C
Insulation Resistance (1) 100MegΩ
Capacitance Change Within ±5%
Resistance to Soldering Heat
Dissipation Factor Maximum 1.1%
240°C for 5 seconds
Insulation Resistance 1GigΩ
Solderability with
95% Minimum Coverage After 2.5 Second Dip into 245°C Solder Pot
25% Wt Rosin-Methanol Flux
RECOMMENDED LAND
RECOMMENDED REFLOW PROFILE PATTERN (mm)
300
Standard: +240 °C Peak Temperature EIA Size A B C
Temperature - Deg. C
25 Pre-heat
Ramp-up 150°C ~ 180°C
25°C ~ 150°C 120 sec. max.
90 sec. max.
0
Time
PART NUMBER SYSTEM
NSWC 822 J 250 TR D1 N F
RoHS Compliant
Optional High Temp. Reflow (+250°C)*
Size Code
Tape & Reel
Voltage
Tolerance Code: J=±5%
Capacitance in pF, 1st two digits are
significant, 3rd digit is no. of zeros
® Series *Special packaging and handling required.
17.4
±1.0
1.75 ±0.1
±1.0
330
80
F
W
.0
21 0.8
B
±
D∅
A P
C 13.4
±1.0