Panduit - Termination - Solutions PDF
Panduit - Termination - Solutions PDF
Panduit - Termination - Solutions PDF
Terminals
Select the right terminal for a specific application Select the right tool for the terminal and the application Produce a high-quality crimp
A1
Terminals
A2
Crimping Guidelines for PANDUIT PAN-TERM Terminals,Disconnects,Splices and Wire Joints (continued)
4. Select the proper crimp pocket for the terminals and wire size you are using PANDUIT crimping tools simplify this process with color coded crimp pockets. The yellow, blue and red pockets are specifically designed for the industry standard barrel sizes, each with a specific color code.
Terminals
5. Perform the electrical crimp For the plier type tool Insulated Terminals and Disconnects A. Locate terminal in appropriate size color-coded crimp die pocket with tool centered on insulation sleeve. (See Note 1 page A6) B. Rotate terminal so tongue is level with crimp die. C. Insert properly stripped wire into terminal until a minimum of 1/32" of wire extends beyond the terminal barrel. D. Squeeze tool handles firmly to perform the electrical crimp. (See Note 2 page A6) E. Provide second crimp on the flared portion of the insulation housing to close the insulation as shown. Caution: when using plier type crimping tools, do not squeeze as firmly as you did for the electrical crimp. (See Note 3 page A6)
Step A
Step B
Steps C & D
Step E
Complete Crimp
A3
Crimping Guidelines for PANDUIT PAN-TERM Terminals,Disconnects,Splices and Wire Joints (continued)
Non-Insulated Terminals and Disconnects A. Locate terminal in appropriate wire gauge crimp die pocket with indenter centered on barrel seam. B. Rotate terminal so tongue is level with crimp die. C. Insert properly stripped wire (based on recommendations on package label) into terminal until a minimum of 1/32" of wire extends beyond the terminal barrel. D. Squeeze tool handles firmly to perform the electrical crimp. (See Note 2 page A6)
Terminals
Step A
Step B
Steps C & D
Complete Crimp Insulated and Non-Insulated Parallel Splices A. Locate parallel splice in appropriate wire gauge crimping die pocket and position tool on the center of the splice. B. Insert properly stripped wire (based on recommendations on package label) into each end of the parallel splice. C. Squeeze tool handles firmly. (See Note 2 page A6) D. An insulation crimp is not required on an insulated parallel splice.
Steps A & B
Steps C & D
Complete Crimp
A4
Crimping Guidelines for PANDUIT PAN-TERM Terminals,Disconnects,Splices and Wire Joints (continued)
Insulated and Non-Insulated Butt Splices A. Locate butt splice in appropriate color-coded crimp die pocket and position crimp halfway between the wire stop (center of splice) and the end of the insulation crimp area. (See Note 4 page A6) B. Insert properly stripped wire (based on recommendations on package label) into one end of butt splice. C. Squeeze tool handles firmly to perform the electrical crimp. (See Note 2 page A6) D. Provide second crimp on the flared portion of the insulation housing to close the insulation. Caution: When using plier type crimping tools, do not squeeze as firmly as you did for the electrical crimp. (See Note 3 page A6) E. Repeat steps one to four for opposite end of butt splice.
Terminals
Steps A & B
Steps C
Step D & E
Complete Crimp
A5
Crimping Guidelines for PANDUIT PAN-TERM Terminals,Disconnects,Splices and Wire Joints (continued)
Insulated and Non-Insulated Wire Joints A. Properly strip wires per manufacturers recommendations on product package label. B. Twist stripped wire ends together, and insert wires into wire joint. C. Locate wire joint in appropriate wire gauge crimp die pocket and position crimp in the center of the metal insert. D. Squeeze tool handles firmly to perform the electrical crimp. (See Note 2 below) Note: an insulation crimp is not required on an insulated wire joint.
Terminals
Steps 1 & 2
Steps 3 & 4
Complete Crimp
NOTES for Crimping with the preferred Hand Operated Controlled Cycle Crimping Tools:
1. PANDUIT controlled cycle crimping tools properly locate rings, forks, and barrel insulated disconnects, pins, and blades. No further positioning is required. 2. When using the preferred controlled cycle tool, once a crimp has been started, the ratchet device of controlled cycle tools will not release until the crimp is complete, independent of operator expertise. 3. Controlled cycle tools provide the electrical crimp and the insulation closure in a single cycle of the tool. 4. When using controlled cycle tooling, insulated butt splices must be inserted from the back of the tool to ensure that the electrical and insulation closure crimp pockets are properly aligned with the splice.
A6
Crimping Guidelines for PANDUIT PAN-TERM Terminals,Disconnects,Splices and Wire Joints (continued)
5. Perform the electrical crimp using the preferred controlled cycle tool A. Make sure the terminal barrel is centered correctly in the right die pocket by using the product locator on the backside of the tool. B. Determine the correct die pocket to use based on the color code of the terminal. C. Squeeze the handles of the tool until one click is heard; this click indicates the terminal is now held in place securely to insert the wire. D. Insert the wire and complete cycle to perform the electrical and insulation crimp simultaneously. E. Crimp complete.
Terminals
Step A
Step B
Step C
Complete Crimp
Note: If your crimp looks like any of the examples shown below, cut off the terminal and recrimp. These crimps would provide a poor connection!
Over Crimp
Rotated Crimp
A7
Terminals
Plier Tools CT-300-1 CT-100 CT-160 CT-200 CT-260 CT-310 Wire Std. Strip Wire Length Range (In.) (AWG) [+1/32;-0] 26-22 22-18 16-14 12-10 22-18 16-14 12-10 26-22 22-18 16-14 12-10 22-18 16-14 12-10 22-18 16-14 12-10 1/4 9/32 9/32 9/32 5/16 5/16 5/16 1/4 9/32 9/32 9/32 5/16 5/16 5/16 9/32 9/32 9/32
Controlled Cycle Hand Tools CT-1014 CT-1015 CT-1525 CT-1550 CT-1551 CT-1570 CT-1701 CT-400 CT-460
Crimp Heads for Pneumatic CT-600 Tool CT-500CH CT-520CH CT-550CH CT-570CH
X X X X
X X X X
X X X
X X X X X X
X X X
X X X
X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X
X X
CT-720 Mechanical
A8
D-M Non-Insulated Male Blade Adapters D-M Non-Insulated Male D-MB, DR-B Non-Insulated Right Angle Female & Non-Insulated Male Butted Seam DNF Nylon, Funnel Entry, Barrel Insulated (not .110/.111) DNF-110, DNF-111 Nylon, Funnel Entry Barrel Insulated .110/.111 Tab Size DNF-FI Nylon, Fully Insulated
9/32 9/32 9/32 9/32 9/32 9/32 9/32 7/32 9/32 9/32 9/32 3/8 3/8 9/32 9/32 3/8 7/32 9/32 9/32 9/32 9/32 9/32
X X X X X
X X X X X X X X X X X
X X X X X
X X X X X X X X X
X X X
X X X
Terminals
22-18 16-14 22-18 16-14 22-18 16-14 12-10 DPF-FI Premium Nylon, Fully Insulated 12-10 DNF-FIB, DNF-FIM, DNF-FIMB, 22-18 DPF-FIB, DPF-FIMB, DNF-LPB, DPF-LPB Nylon & Premium Grade 16-14 Nylon, Fully Insulated, Funnel Entry, Male/Female Couplers (not .110/.111) 12-10 DMF-FIB, DPF-FIB Nylon Premium Grade Nylon, Fully Insulated, Funnel Entry, .110/.111 Tab Size DNF-FIBX Nylon, Expanded Wire Entry, Fully Insulated DNF-M Nylon Insulated, Funnel Entry, Barrel Insulated, Male 22-18 22-18 16-14 22-18 16-14 12-10
X X
X X X X X X
X X X X X X
X X X X X X X X X X X
X X X X X
X X X X X X X X
X X X X X X
X X X X X
X X
X X X
X X X
X X X
X X
X X X
A9
Terminals
Plier Tools CT-300-1 CT-100 CT-160 CT-200 CT-260 CT-310 Wire Std. Strip Wire Length Range (In.) (AWG) +1/32;-0] 22-18 16-14 22-18 16-14 22-18 16-14 22-18 16-14 22-18 16-14 12-10 12-10 22-18 16-14 22-18 16-14 12-10 9/32 9/32 11/32 11/32 1/4 1/4 1/4 1/4 5/16 5/16 5/16 9/32 1/4 1/4 9/32 9/32 9/32
Controlled Cycle Hand Tools CT-1014 CT-1015 CT-1525 CT-1550 CT-1551 CT-1570 CT-1701 CT-400 CT-460
Crimp Heads for Pneumatic CT-600 Tool CT-500CH CT-520CH CT-550CH CT-570CH
Terminal Series DNFR-B Nylon Pre-Insulated, Right Angle DNFR-FIB Nylon Butted Seam, Right Angle DNG-FB Supra Grip Nylon Fully Insulated (Except DNG14-187FB & DNG14-188FB) DNG-FL Disco-Lok Nylon, Fully Insulated DNH Heat Shrink
X X X X X X X X X X X X X X X X X
X X
DV Vinyl Barrel Insulated Sleeve DV-B Vinyl Insulated, Butted Seam DV-M Non-Insulated Male Blade Adapters DV-M Non-Insulated Male Disconnects
X X X X X X X X X X X X X
X X X X X X X
X X X
CT-720 Mechanical
A10
DV-MB Vinyl Insulated Butted Seam Male Disconnects DV-P Vinyl Insulated Piggyback Disconnects DVF Vinyl Funnel Entry Barrel Insulated Female Disconnect Wire Joints J Non-Insulated J214-312, J318-412, J216-410 JN Nylon Insulated JN224-318, JN218-216, JN418-212, JN314-212 Terminals P-HDR Non-Insulated Heavy Duty Rings P-P Non-Insulated Pin Terminals
22-18 16-14 22-18 16-14 22-18 16-14 18-12 18-12 16-10 24-16 22-14 18-12 14-12 16-12 22-18 16-14 12-10 8 6 4 2 22-26 22-18 16-14 12-10
9/32 9/32 1/4 1/4 9/32 9/32 1/2 1/2 3/4 7/16 7/16 1/2 5/8 9/32 9/32 9/32 9/32 3/8 7/16 1/2 1/2 3/16 7/32 7/32 9/32
X X X X
X X X X X X
X X X X X X X X X X
X X X X X X
X X X X X X
Terminals
X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X
X X X X
X X X X
X X X X
X X X X
X X X X
X X X X X
P-R, P-R, P-LF, P-SLF, P-FF Non-Insulated Rings, Forks, Locking Forks, Short Locking Forks, Flanged Forks
X X X X
X X X
X X X X
X X X X
X X X
X X X
A11
Terminals
Plier Tools CT-300-1 CT-100 CT-160 CT-200 CT-260 CT-310 Wire Std. Strip Wire Length Range (In.) (AWG) [+1/32;-0] 22-18 16-14 12-10 22-18 16-14 12-10 22-18 16-14 12-10 26-22 22-18 16-14 12-10 9/32 9/32 9/32 5/16 5/16 5/16 7/32 7/32 9/32 3/16 7/32 7/32 9/32 9/32 7/32 7/32 9/32
Controlled Cycle Hand Tools CT-1014 CT-1015 CT-1525 CT-1550 CT-1551 CT-1570 CT-1701 CT-400 CT-460
Crimp Heads for Pneumatic CT-600 Tool CT-500CH CT-520CH CT-550CH CT-570CH
X X X
X X X
X X X
X X X X X X
X X X
X X X
PN-R, PN-RX, PN-F, PN-LF, PN-FF, PNF-R, PNF-F, PNF-LF Nylon & Nylon Funnel Entry Forks, Locking Forks, Flanged Forks (Includes Expanded Insulated) PN-HDR, PN-HDRX Nylon Insulated Heavy Duty & Nylon Expanded 16-12 Insulated Heavy Duty Rings PN-SLF, PNF-SLF Nylon Insulated 22-18 Short Locking Forks 16-14 12-10
X X X X X X X
X X X X X X X X X X X X X X X X
X X X X X X X X X X
X X X X X
X X X X X X X
X X
X X
X X X
CT-720 Mechanical
A12
PSN Nylon Insulated Parallel Splices PV-HDR, PV-HDRX Vinyl Insulated Heavy Duty Rings PV-LF, PV-LFX Vinyl Insulated Locking Forks (includes Expanded Insulation)
X X X X X
X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
Terminals
22-18 5/16 X 16-14 5/16 X 12-10 5/16 X PV-P Vinyl Insulated Pin Terminals 22-18 5/16 X 16-14 5/16 X 12-10 5/16 X PV-R, PV-F, PV-FF, PV-RX, 26-22 3/16 X PV-FX Vinyl Insulated Rings & Forks 22-18 5/16 X (includes Expanded Insulation) 16-14 5/16 X 12-10 5/16 X PV-R, PV-RX Vinyl Insulated Large 8 3/8 Ring Terminals 6 7/16 4 1/2 2 1/2 PV-SLF Vinyl Insulated Short 22-18 5/16 Locking Forks 16-14 5/16 12-10 5/16 *KYNAR is a registered trademark of Atofina Chemicals, Inc. Use Die CD-700P-8-2
X X X X X X X X X X X X X X X
X X
A13
Terminals
Tooling
CT-1700
CT-720
CT-2001
PANDUIT Part Number S8-10R-Q S8-14R-Q S8-56R-Q S8-38R-Q S6-10R-E S6-14R-E S6-56R-E S6-38R-E S4-10R-E S4-14R-E S4-56R-E S4-38R-E S2-10R-X S2-14R-X S2-56R-X S2-38R-X S2-12R-X S1/0-14R-X S1/0-56R-X S1/0-38R-X S1/0-12R-X S2/0-14R-X S2/0-56R-X S2/0-38R-X S2/0-76R-X S2/0-12R-X S3/0-14R-5 S3/0-56R-5 S3/0-38R-5 S3/0-76R-5 S3/0-12R-5 S4/0-38R-5 S4/0-76R-5 S4/012R-5 S250-56R-5 S250-38R-5 S250-76R-5 S250-12R-5
P24 (2)
P29 (2)
STD (1)
P37 (3)
STD (1)
STD (1)
STD (1)
STD (1)
STD (1)
STD (1)
A14
Terminals
Wire Range (AWG) 24-18 16-14 12-10 8-6 4-2 1 26-18 16-14 12-10 8-6 4-2 1 22-18 16-14 12-10
Wire Range (mm) .25-1.00 1.50-2.00 4.00-6.00 10.0-16.0 25.0-35.0 50.0 .41-1.00 1.50-2.00 4.00-6.00 10.0-16.0 25.0-35.0 50.0 .50-1.00 1.50-2.00 4.00-6.00
X X X
X X X X
FSD, FSF Insulated Single Wire Ferrules (DIN or French color code)
FTD
CT-1006
A15
Terminals
Termination Tooling
Hand Operated Plier Type Tools
Installer controlled crimp General purpose Plier type crimp for #22 thru #10 insulated and non-insulated terminal products CT-260
CT-200
CT-160
CT-100
Std. Pkg. Qty. 1 1
Part Description Crimps insulated and non-insulated terminals. Forged steel tool. Cuts wire. Crimps most PANDUIT #18 #10 AWG non-insulated terminals, disconnects and splices. Forged steel tool. Cuts wire. Crimps most PANDUIT #26 #10 AWG insulated and non-insulated terminals, disconnects and splices. Cuts three U.S. and three Metric screw sizes. Cuts and strips wire. Has insulation closure pocket. Crimps most PANDUIT #26 #10 AWG insulated and non-insulated terminals, disconnects and splices. Cuts #4, #6, #8 and #10 screw sizes. Cuts and strips wire. Excellent all-around application tool of heat treated finished steel with comfortable cushioned plastic grip handles.
CT-160
CT-100
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
A16
Terminals
CT-1525
CT-1550
CT-1551
CT- 1700
CT-1014
CT-1570
Part Number CT-1525
CT-1701
CT-1015
Std. Pkg. Qty. 1
Part Description Crimps PANDUIT #26 #22 AWG insulated terminals and splices, #22 #10 AWG fully insulated disconnects and insulated parallel splices. Crimps PANDUIT #22 #14 AWG barrel insulated disconnects. CT-1550 Crimps most PAN-TERM #22 #10 AWG nylon and vinyl insulated terminals, splices and disconnects. The CT-1550 has the red/blue pocket closest to the pivot which provides a reduced crimp effort for those who make red/blue terminations. CT-1551 Crimps most PAN-TERM #22 #10 AWG nylon and vinyl insulated terminals, splices and disconnects. The CT-1551 has the yellow pocket closest to the pivot which provides a reduced crimp effort for those who make yellow terminations. CT-1570 Crimps most PAN-TERM #22 #10 AWG and .5 6.0mm non-insulated terminals and disconnects. Crimps PANDUIT #22 #10 AWG and .5 6.0mm non-insulated splices, and #10 AWG compression lugs. CT-1700 Crimps PANDUIT #8 #2 AWG non-insulated tubular terminals (S series), #8 #1 AWG copper lugs and splices, #6 #4 AWG aluminum lugs and splices and CTAPF copper taps for #14 #3 AWG. Includes five position, color coded rotating die. CT-1701 Crimps PANDUIT #10 #2 AWG non-insulated large gauge ring terminal (P series). Crimps #8 #1 AWG copper lugs and splices, and #6 #4 AWG aluminum lugs and splices, and #14 #3 AWG CTAPF copper taps. Includes 5 position rotating die. CT-1014 Crimps PANDUIT #22 #14 AWG loose piece DISCO-LOK disconnects. CT-1015 Crimps PANDUIT #22 #14 AWG loose piece SUPRA-GRIP disconnects. Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
1 1
A17
Terminals
Part Description Crimps PANDUIT #22 #14 AWG fully insulated right angle disconnects. (DNFR-FIB series).
CT-1002
CT-1003
CT-1004
Part Number CT-1002
CT-1005
CT-1006
Std. Pkg. Qty. 1
Part Description Crimps PANDUIT #26 #10 AWG single vinyl insulated ferrules (DIN). #26 #10 AWG single wire insulated ferrules (French). #22 #12 AWG vinyl insulated dual-wire ferrules (DIN). #24 #10 AWG non-insulated ferrules. Crimps PANDUIT #22 #8 AWG single wire insulated ferrules (DIN). #22 #8 AWG single wire vinyl insulated ferrules (French). #22 #10 AWG vinyl insulated dual-wire (DIN) ferrules. #22 #10 AWG non-insulated ferrules. Crimps PANDUIT #8 #6 AWG single wire vinyl insulated ferrule (DIN). #8 #6 AWG single wire vinyl insulated ferrules (French). #10 AWG vinyl insulated dual-wire (DIN) ferrule. #8 #6 AWG non-insulated ferrules. Crimps PANDUIT #4 #2 AWG single wire vinyl insulated ferrule (DIN). #4 #2 AWG single wire vinyl insulated ferrules (French). #4 #2 AWG non-insulated ferrules. Crimps PANDUIT #1 AWG single wire vinyl insulated ferrule (DIN) and (French). #1 AWG non-insulated ferrules.
CT-1003
CT-1004
CT-1005
CT-1006
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
A18
Terminals
CST101
CST115
Part Number CST101 CST115 Std. Pkg. Qty. 1 1
Item Part Description CST114-157 Cable stripping tool for stripping insulation from cables 3/16" to 1 9/16" diameter. Includes replacement cutting blade. Warranty: 90 days
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A19
Terminals
Internal barrel serrations assure good wire contact and maximum tensile strength Internally beveled barrel for quick easy wire insertion
UL and CSA rated up to 2000V per UL486A. Nickel plated terminals rated up to 343C (650F) maximum operating temperature.
UL and CSA rated up to 600V per UL486. Flammability UL94V-2/HB. Proprietary blend of UL94V-2 and UL94HB flammability rated materials.
A20
Terminals
Seamless tubular barrel provides consistent, high performance, quality crimps Maximum recommended operating temperature 150C (302F)
A21
Terminals
Part Number PV18-4R-CY PV18-6R-CY PV18-8R-CY PV18-10R-CY PV18-14R-CY PV18-56R-CY PV18-38R-CY PV14-4R-C PV14-6RN-C PV14-6R-C PV14-8R-C PV14-10R-C PV14-14R-C PV14-56R-C PV14-38R-L PV10-6R-L PV10-8R-L PV10-10R-L PV10-14R-L PV10-56R-L PV10-38R-L
Stud Size #4 #6 #8 #10 1/4" 5/16" 3/8" #4 #6 #6 #8 #10 1/4" 5/16" 3/8" #6 #8 #10 1/4" 5/16" 3/8"
Wire Range
Color Code
Tool
22 18 AWG
Red
16 14 AWG
Blue
12 10 AWG
Yellow
**To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SAC-ELCB03 at www.panduit.com Prime items appear in BOLD.
A22
Terminals
Stud Size
**To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A23
Terminals
Part Number P18-6R-C P18-8R-C P18-10R-C P18-14R-C P14-6R-C P14-8R-C P14-10R-C P14-14R-C P14-56R-C P14-38R-C P10-6R-L P10-8R-L P10-10R-L P10-14R-L P10-56R-L P10-38R-L
Stud Size #6 #8 #10 1/4" #6 #8 #10 1/4" 5/16" 3/8" #6 #8 #10 1/4" 5/16" 3/8"
Wire Range
Tool
22 18 AWG
16 14 AWG
12 10 AWG
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SA-ELCB03 at www.panduit.com Prime items appear in BOLD.
A24
Terminals
Stud Size #6
PV18-6FN-CY PV18-6F-CY PV18-8F-CY PV18-10F-CY PV14-6FN-C PV14-6F-C PV14-8F-C PV14-10FN-C PV14-10F-C PV14-14F-C PV10-6F-L PV10-8F-L PV10-10F-L PV10-14F-L
22 18 AWG
Red
100 100 100 100 100 100 100 100 100 100 50 50 50 50
16 14 AWG
Blue
12 10 AWG
Yellow
*Not UL Listed or CSA Certified. **To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A25
Terminals
Part Number P22-4F-C* P18-6FN-C P18-6F-C P18-8F-C P18-10F-C P14-6F-C P14-8F-C P14-10F-C P10-6F-L P10-8F-L P10-10F-L
16 14 AWG
CT-100, CT-200, CT-600, CT-1570 CT-100, CT-200, CT-600, CT-1570, CT-1701 CT-100, CT-200, CT-600, CT-1570, CT-1701
12 10 AWG
*Not UL Listed or CSA Certified. **To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SA-ELCB03 at www.panduit.com Prime items appear in BOLD.
A26
Terminals
Part Number PV18-6LF-CY PV18-8LF-CY PV18-10LF-CY PV14-6LF-C PV14-8LF-C PV14-10LF-C PV10-6LF-L PV10-8LF-L PV10-10LF-L PV10-14LF-L
Color Code
Tool CT-100, CT-600, CT-1550, CT-1551 CT-100, CT-600, CT-1550, CT-1551 CT-100, CT-600, CT-1550, CT-1551
Red
16 14 AWG
Blue
12 10 AWG
Yellow
**To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
Tool CT-100, CT-200, CT-600, CT-1570 CT-100, CT-200, CT-600, CT-1570 CT-100, CT-200, CT-600, CT-1570, CT-1701
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations. Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A27
Terminals
Tool CT-100, CT-260, CT-1550, CT-1551 CT-100, CT-260, CT-1550, CT-1551 CT-100, CT-260, CT-1550, CT-1551
**To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
Tool CT-100, CT-200, CT-260, CT-1570 CT-100, CT-200, CT-260, CT-1570 CT-100, CT-200, CT-260, CT-1570
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SA-ELCB03 at www.panduit.com Prime items appear in BOLD.
A28
Terminals
Nylon Fully Insulated Female Receptacles and Male Tabs Type DNF-FIB
Available in tab sizes to accommodate .110", .187", .205" or .250" tabs Fully insulated design provides protection from electrical shorts
Expanded wire entry (on select sizes) accommodates large insulation or multiple wires Maximum insulation temperature 105C (221F) Insulation support restricts excessive wire movement to minimize stress on crimp joint Funnel entry for faster wire insertion and lower installed cost
DISCO-GRIP Premium Nylon Fully Insulated Female Receptacles and Male Tabs Type DNF and DPF
Available in tab sizes to accommodate .250" tabs Fully insulated design provides protection from electrical shorts
Funnel entry for faster wire insertion and lower installed cost UL and CSA rated up to 600V per UL310. Male products available .250" width in standard and oversized housing configurations.
A29
Terminals
Maximum insulation temperature 105C (221F) Fully integrated metal insulation grip for high vibration, high strain relief, and double crimp requirements UL and CSA rated up to 600V per UL310. Funnel entry for faster wire insertion and lower installed cost
Maximum insulation temperature 105C (221F) Insulation grip sleeve provides a superior insulation crimp for high vibration and high strain relief applications UL and CSA rated up to 300V. Funnel entry for faster wire insertion and lower installed cost
A30
Terminals
Insulation grip sleeve provides a superior insulation crimp for high vibration and high strain relief applications UL and CSA rated up to 300V. Male products available .250" width.
Funnel entry for faster wire insertion and lower installed cost
Vinyl Barrel Insulated Female Receptacles and Male Tabs Type DV and DVF
Available in tab sizes to accommodate .187", .205" or .250" tabs Maximum insulation temperature 105C (221F)
Insulation support to protect electrical crimp UL and CSA rated up to 600V. Male products available .250" width. Flammability UL94V-0.
Sleeved barrel assures crimp reliability Maximum recommended operating temperature 150C (302F) Male products available .250" width.
A31
Terminals
PAN-TERM Disconnects
Female Disconnect Nylon Fully Pre-Insulated Funnel Entry
Insulation support helps to prevent wire damage in bending applications Internal wire stop assures proper length of insertion into terminal barrel
Part Number DNF18-110FIB-C DNF18-111FIB-C DNF18-187FIB-C DNF18-188FIB-C DNF18-205FIB-C DNF18-206FIB-C DNF18-250FIB-C DNF14-187FIB-C DNF14-188FIB-C DNF14-205FIB-C DNF14-206FIB-C DNF14-250FIB-C DNF10-250FIB-L
Tab Size (In.) .110 x .032 .110 x .020 .187 x .032 .187 x .020 .205 x .032 .205 x .020 .250 x .032 .187 x .032 .187 x .020 .205 x .032 .205 x .020 .250 x .032 .250 x .032
Wire Range
Color Code
Tool
Std. Pkg. Qty.** 100 100 100 100 100 100 100 100 100 100 100 100 50
22 18 AWG
Red
16 14 AWG
Blue
12 10 Yellow AWG
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SA-ELCB03 at www.panduit.com Prime items appear in BOLD.
A32
Terminals
*Recognized Tab Size Part Number (In.) DV18-187B-CY .187 x .032 DV18-188B-CY .187 x .020 DV18-250B-CY .250 x .032 DV14-187B-C* .187 x .032 DV14-188B-C* DV14-205B-C* DV14-250B-C* .187 x .020 .205 x .032 .250 x .032 Wire Range 22 18 AWG Color Code Red Std. Pkg. Qty.** 100 100 100 100 100 100 100
Tool CT-1525
16 14 AWG
Blue
CT-1525^
*UL Recognized and CSA approved. **To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000. ^CSA approved tooling/product combinations. UL and CSA approved tooling/product combinations. Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A33
Terminals
Tool CT-100
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
**To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000.
Wire Range
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SA-ELCB03 at www.panduit.com Prime items appear in BOLD.
A34
Terminals
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
Tab Wire Size Part Number Range (In.) DNFR18-250B-C .250 x .032 22 18 AWG DNFR14-250B-C .250 x .032 16 14 AWG
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000. UL and CSA approved tooling/product combinations.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A35
Terminals
*Recognized Tab Size (In.) .250 x .032 Wire Range 16 14 AWG 12 10 AWG Std. Pkg. Tool Qty.** CT-100, CT-200, 100 CT-600, CT-1570 CT-100, CT-200, 50 CT-600, CT-1570, CT-1701
DR10-250-L
.250 x .032
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SA-ELCB03 at www.panduit.com Prime items appear in BOLD.
A36
Terminals
Tool
CT-1550, CT-1551
*Not CSA Certified. **To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
**To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A37
Terminals
Tool CT-100
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
**To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000. UL and CSA approved tooling/product combinations.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SA-ELCB03 at www.panduit.com Prime items appear in BOLD.
A38
Terminals
A39
Terminals
Maximum recommended operating temperature 150C (302F) UL and CSA rated up to 600V. Metric versions available. Internally beveled barrel for quick easy wire insertion
A40
PAN-TERM Splices
Butt Splice, Nylon Insulated
Brazed seam protects terminal barrel from splitting during the crimp process Internal wire stop assures proper length of insertion into terminal barrel
Terminals
Std. Pkg. Qty.** 100 100 100 50
*Not UL Listed. **To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
**To order in bulk, replace -C or -CY in the part number with -M or -MY for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A41
Terminals
Tool CT-100 CT-100, CT-200, CT-600, CT-1570 CT-100, CT-200, CT-600, CT-1570, CT-1701
*Not UL Listed. **To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500. UL and CSA approved tooling/product combinations.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000.
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000 and replace -L with -D for a bulk package of 500.
For a complete line of terminal products, see the PANDUIT Electrical Solutions Catalog, SA-ELCB03 at www.panduit.com Prime items appear in BOLD.
A42
Terminals
A43
Terminals
Min/Max Color Wire Range Code (2) #24 Red (2) #16 (2) #22 (2) #16 (4) #18 (2) #12 Clear Clear
6480 14750
**To order in bulk, replace -C in the part number with -M for a bulk package of 1000, with exception of JN418-212-C, replace -C with -D for bulk package of 500. UL and CSA approved tooling/product combinations.
Min/Max Wire Range (2) #14 (3) #12 (3) #18 (4) #12
CMA Range Min. 5760 4860 Max. 19590 27330 Tool CT-100, CT-200
**To order in bulk, replace -T in the part number with -2M for a bulk package of 2000. UL and CSA approved tooling/product combinations.
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
A44
Terminals
Maximum insulation temperature 89C (192F) Color coded polypropylene identifies wire range. (German and French codes available)
A45
Terminals
PAN-TERM Ferrules
Insulated Ferrules Single Wire DIN End Sleeve
Molded housing allows easy insertion of wire Seamless barrel contains wire strands preventing fraying or bending, resulting in high quality, reliable connections
Pin Wire Strip Std. Wire Size Length Length Color Pkg. Part Number AWG mm In. mm In. mm Tool Code Qty. .24 6.0 3/8 9.5 500 FSD74-6-D 24 .34 Turquoise CT-1002 .31 8.0 15/32 11.9 500 FSD74-8-D AWG .24 6.0 3/8 9.5 500 FSD75-6-D 22 .31 8.0 15/32 11.9 500 FSD75-8-D .50 White AWG .39 10.0 17/32 13.5 500 FSD75-10-D .24 6.0 3/8 9.5 500 FSD76-6-D 20 .75 Gray .31 8.0 15/32 11.9 500 FSD76-8-D AWG .24 6.0 3/8 9.5 500 FSD77-6-D .31 8.0 15/32 11.9 500 FSD77-8-D 18 1.00 Red .39 10.0 17/32 13.5 500 FSD77-10-D AWG .47 12.0 5/8 15.9 500 FSD77-12-D .24 6.0 3/8 9.5 CT-1002, 500 FSD78-6-D .31 8.0 15/32 11.9 CT-1003 500 FSD78-8-D 16 1.50 Black .39 10.0 17/32 13.5 500 FSD78-10-D AWG .47 12.0 5/8 15.9 500 FSD78-12-D 2.08 Yellow .31 8.0 15/32 11.9 500 FSD79-8-D 14 .31 8.0 15/32 11.9 500 FSD80-8-D AWG 2.50 Blue .47 12.0 5/8 15.9 500 FSD80-12-D .39 10.0 17/32 13.5 500 FSD81-10-D 12 4.00 Gray .47 12.0 5/8 15.9 100 FSD81-12-C AWG 100 FSD82-12-C 10 6.00 Yellow .47 12.0 5/8 15.9 AWG 10.0 Red .47 12.0 5/8 15.9 CT-1003, 100 FSD83-12-C 8 AWG CT-1004
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
A46
Terminals
Pin Wire Size Color Length Part Number AWG mm Code In. mm 22 .50 White .31 8.0 FTD75-8-D AWG .31 8.0 FTD76-8-D 20 .75 Gray AWG FTD76-10-D .39 10.0 .31 8.0 FTD77-8-D 18 1.00 Red .39 10.0 FTD77-10-D AWG .31 8.0 FTD78-8-D 16 1.50 Black .47 12.0 FTD78-12-D AWG .39 10.0 FTD80-10-TL 14 2.50 Blue .51 13.0 FTD80-13-TL AWG 12 4.00 Gray .47 12.0 FTD81-12-C AWG FTD82-14-C 10 6.00 Yellow .55 14.0 AWG
Wire Strip Length In. mm 7/16 11.2 7/16 9/16 7/16 9/16 7/16 21/32 9/16 23/32 21/32
Tool
11.2 500 14.0 500 11.2 500 14.0 CT-1002, 500 11.2 CT-1003 500 16.8 500 14.0 250 16.2 250 16.8 100
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A47
Terminals
Ferrules, Non-Insulated
Flared barrel allows easy insertion of wire Non-insulated barrel can be used to provide an economical termination when insulation is not required
Part Number F73-5-M F73-7-M F74-5-M F75-6-M F75-8-M F75-10-M F76-6-M F76-8-M F76-10-M F77-6-M F77-7-M F77-8-M F78-7-M F78-8-M F78-10-M F80-7-M F80-8-M F80-10-M F81-9-M F81-10-M F81-12-M F82-10-M F82-12-M F82-15-M
Wire Size In. mm 24 AWG 22 AWG 20 AWG 18 AWG 16 AWG 14 AWG 12 AWG 10 AWG .25 .34 .50
.75
1.0
1.5
2.5
4.0
6.0
Length In. mm .20 5.0 .28 7.0 .20 5.0 .24 6.0 .31 8.0 .39 10.0 .24 6.0 .31 8.0 .39 10.0 .24 6.0 .28 7.0 .31 8.0 .28 7.0 .31 8.0 .39 10.0 .28 7.0 .31 8.0 .39 10.0 .35 9.0 .39 10.0 .47 12.0 .39 10.0 .47 12.0 .59 15.0
Wire Strip Length In. mm 7/32 5.0 9/32 7.0 7/32 5.0 1/4 6.0 5/16 8.0 13/32 10.0 1/4 6.0 5/16 8.0 13/32 10.0 1/4 6.0 9/32 7.0 5/16 8.0 9/32 7.0 5/16 8.0 13/32 10.0 9/32 7.0 5/16 8.0 13/32 10.0 11/32 8.0 13/32 10.0 15/32 12.0 13/32 10.0 15/32 12.0 19/32 15.0
Std. Pkg. Tool Qty. 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 CT-1002, 1000 CT-1003 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
A48
Terminals
Part Number F83-12-D F83-15-D F83-18-D F84-12-TL F84-15-TL F84-18-TL F85-12-C F85-15-C F85-18-C F86-18-C F86-20-C F86-25-C F87-18-C F87-22-C F87-25-C
16.0
25.0
35.0
50.0
Length In. mm .47 12.0 .59 15.0 .71 18.0 .47 12.0 .59 15.0 .71 18.0 .47 12.0 .59 15.0 .71 18.0 .71 18.0 .79 20.0 .98 25.0 .71 18.0 .87 22.0 .98 25.0
Wire Strip Length In. mm 15/32 12.0 19/32 15.0 23/32 18.0 15/32 12.0 19/32 15.0 23/32 18.0 15/32 12.0 19/32 15.0 23/32 18.0 23/32 18.0 25/32 20.0 31/32 25.0 23/32 18.0 7/8 22.0 31/32 25.0
CT-1004
CT-1005
CT-1006
Std. Pkg. Qty. 500 500 500 250 250 250 100 100 100 100 100 100 100 100 100
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A49
Terminals
Terminal Kits
Plastic Box Terminal Kits
Ideal for maintenance and construction wiring Rugged plastic construction Kit has hanging tab for easy storage
KP-1165
Part Description Terminal kit without crimping tool. Includes the following: (20) PV18-8R; PV18-6F; PV14-8F; PV14-10R; (10) PV10-8R; PV10-10R; DNF14-250; DNF-18-250; BSV18X; BSV14X; BSV10X; (5) JN418-212. Includes the following: (18) PV18-8R; PV14-10R; P18-6F; P14-8F; (10) PV10-8R; PV10-10R; BSV18X; BSV14X; BSV10X; DV18-250B; DV14-188B; (5) JN418-212; (1) CT-160 Tool; KP-1000 Box.
K-1102
Part Description Empty steel box, 20 terminal compartments and 1 tool compartment, measures 13 21/64" wide x 9 21/64" deep x 2" high Latch prevents accidental opening Handle for portability or as drawer pull when used in rack Drop-in label area on front Includes the following: (100) PV18-6LF; PV18-8LF; PV14-8LF; PV14-10LF; BSV18X; BSV14X; (50) PV10-10LF; BSV10X; (1) CT-100 Tool; K-1000 Box. Includes the following: (50) PN18-10R; PN14-6R; PN14-10R; PN18-6F; PN14-6F; PN14-10F; (25) PN10-10R; PN10-56R; PN10-10F; BSN14; BSN10; JN418-212; (1) CT-100 Tool; K-1000 Box.
K-1104
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
A50
Terminals
Part Description Kit contains: (1) K-1001 steel kit box (1) CT-260 installation tool Cable Ties (100) PLT2S cable ties Terminals (100) PN14-610R multi-stud terminals (100) PN18-610R multi-stud terminals (100) PN18-6LF locking fork terminals (100) PN14-8LF locking fork terminals (50) PN10-10LF locking fork terminals (100) PN18-8F fork terminals (100) PN14-10R ring terminals (50) PN10-10R ring terminals Disconnects (100) DNF18-250 disconnects (100) DNF14-250 disconnects (50) DV10-250 disconnects Splices (50) BSN18 butt splices (50) BSN14 butt splices (25) BSN10 butt splices Marking System (1) PMD-0-9 marking dispenser and tape (100) MP150 marker tags (1) PX-0 marker
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
A51
Terminals
Part Description Kit contains: (1) K-1001 steel kit box (1) CT-260 installation tool Cable Ties (100) PLT2S cable ties Terminals (100) PV18-8F fork terminals (100) PV18-6LF locking fork terminals (100) PV14-8LF locking fork terminals (50) PV10-10LF locking fork terminals (100) PV18-610R multi-stud terminals (100) PV14-10R ring terminals (50) PV10-10R ring terminals Disconnects (100) DV18-250B disconnects (100) DV14-250B disconnects (50) DV10-250 disconnects Splices (50) BSV18X butt splices (50) BSV14X butt splices (25) BSV10X butt splices Wire Joints (30) JN224-318 (15) JN314-412 Marking System (1) PMD-0-9 marking dispenser and tape
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
A52
Power Connectors
B1
Crimping Guidelines for PANDUIT PAN-LUG Compression Lugs and Splices (continued)
3. Select the proper crimping die and crimping tool to be used with the connector. Use crimping tools and dies that provide a UL Listed and/or CSA Certified electrical termination, to assure a safe and reliable connection. Many PANDUIT compression connectors are UL Listed and CSA Certified when crimped with PANDUIT and specified competitor crimping tools and dies. These tools and dies are listed in the tool charts*. PANDUIT crimping tools and dies to be used with each connector are also listed on the installation instructions included with PANDUIT product packaging.
Power Connectors B2
PANDUIT compression connectors are color coded and marked with PANDUIT and specified competitor die index numbers. Select the proper crimping die to be used by matching the color code and die index number marked on the connector to the same markings on the crimping die.
*See condensed tool charts on pages B4-B27; for complete tool charts refer to pages D2.148-D2.186 of the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Crimping Guidelines for PANDUIT PAN-LUG Compression Lugs and Splices (continued)
4. Crimp the connector. Insert the conductor into the barrel of the connector. The conductor should stop against the end of the barrel of the lug, or wire stop in the butt splice, upon complete insertion of the conductor in the barrel. Some lugs are offered with inspection windows that provide visual inspection of the complete conductor insertion. Review the installation instructions included with the PANDUIT product packaging or the tool charts* for the proper number of crimps to be placed in the connector. Make the first crimp in the barrel nearest the tongue of the lug, or wire stop in a butt splice, and make Identify successive crimps in the barrel working towards the conductor entry at the end of the barrel. Use the color coded or knurled band markings on the barrel of the connector to evenly space the placement of the crimps in the barrel. When properly crimped, the die index number engraved in the crimping die will be embossed into the barrel of the connector. The crimp should be placed in the connector so the die index number can be easily read when the connector is installed.
Power Connectors
*See condensed tool charts on pages B4-B27; for complete tool charts refer to pages D2.148-D2.186 of the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
B3
PANDUIT Connector Type LCA10 LCB10 LCD10 LCC10 LCAS8 LCA8 LCAN8 LCB8 LCBN8 LCD8 LCDN8 LCC8 LCCN8 SCSS8 SCS8 SCL8 LCAS6 LCA6 LCAN6 LCB6 LCBN6 LCD6 LCDN6 LCC6 LCCN6 SCSS6 SCS6 SCL6 LCAS4 SCSS4 LCA4 LCAN4 LCB4 LCBN4 LCD4 LCDN4 LCC4 LCCN4 SCS4 SCL4
Std. Wire Size #14 #10 AWG STR, #12 #10 AWG SOL
CT-720
12 10
P10
Power Connectors
#8 AWG
Red P21
#6 AWG
Blue P24
#4 AWG STR
Gray P29
B4
UNI-DIE CT-980, CT-2980, CT980CH, CT-2981, CT980LPCH, CT-2950 Extended Wire Range
CT-2001, CT-2002
Power Connectors
#4 AWG STR
Note: See page B27 for note references. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B5
PANDUIT Connector Type LCAS2 LCA2 LCAN2 LCB2 LCBN2 LCD2 LCDN2 LCC2 LCCN2 SCSS2 SCS2 SCL2 LCAS1 LCA1 LCAN1 LCB1 LCBN1 LCD1 LCDN1 LCC1 LCCN1 SCSS1 SCS1 SCL1 LCAS1/0 LCA1/0 LCAN1/0 LCB1/0 LCBN1/0 LCD1/0 LCDN1/0 LCC1/0 LCCN1/0 SCSS1/0 SCS1/0 SCL1/0
CT-720
Power Connectors
#2 AWG
Brown P33
#1 AWG
Green P37
1/0 AWG
B6
UNI-DIE CT-980, CT-2980, CT-980CH, CT-2981, C-T980LPCH, CT-2950 Extended Wire Range
CT-2001, CT-2002
Power Connectors
#6 #2 AWG
#6 #1 AWG
#6 1/0 AWG
B7
PANDUIT Connector Type LCAS2/0 LCA2/0 LCAN2/0 LCB2/0 LCBN2/0 LCD2/0 LCDN2/0 LCC2/0 LCCN2/0 SCSS2/0 SCS2/0 SCL2/0 LCAS3/0 LCA3/0 LCAN3/0 LCB3/0 LCBN3/0 LCD3/0 LCDN3/0 LCC3/0 LCCN3/0 SCSS3/0 SCS3/0 SCL3/0 LCAS4/0 LCA4/0 LCAN4/0 LCB4/0 LCBN4/0 LCD4/0 LCDN4/0 LCC4/0 LCCN4/0 SCSS4/0 SCS4/0 SCL4/0
CT-1570
CT-1701
CT-1700
CT-720
Power Connectors
2/0 AWG
3/0 AWG
4/0 AWG
B8
UNI-DIE CT-980, CT-2980, CT-980CH, CT-2981, CT-980LPCH, CT-2950 Extended Wire Range
CT-2001, CT-2002
Power Connectors
#4 2/0 AWG
#2 3/0 AWG
#1 4/0 AWG
B9
PANDUIT Connector Type LCAS250 LCA250 LCAN250 LCB250 LCBN250 LCD250 LCDN250 LCC250 LCCN250 SCSS250 SCS250 SCL250 LCA300 LCAN300 LCB300 LCBN300 LCD300 LCDN300 LCC300 LCCN300 SCS300 SCL300 LCA350 LCAN350 LCB350 LCBN350 LCD350 LCDN350 LCC350 LCCN350 SCS350 SCL350
CT-1570
CT-1701
CT-1700
CT-720
Power Connectors
250 kcmil
300 kcmil
350 kcmil
B10
UNI-DIE CT-980, CT-2980, CT-980CH, CT-2981, CT-980LPCH, CT-2950 Extended Wire Range
CT-2001, CT-2002
Power Connectors
B11
PANDUIT Connector Type LCA400 LCAN400 LCB400 LCBN400 LCD400 LCDN400 LCC400 LCCN400 SCS400 SCL400 LCA500 LCAN500 LCB500 LCBN500 LCD500 LCDN500 LCC500 LCCN500 SCS500 SCL500 LCA600 LCAN600 LCB600 LCBN600 LCD600 LCDN600 LCC600 LCCN600 SCS600 SCL600
CT-1570
CT-1701
CT-1700
CT-720
Power Connectors
400 kcmil
500 kcmil
600 kcmil
B12
UNI-DIE CT-980, CT-2980, CT-980CH, CT-2981, CT-980LPCH, CT-2950 Extended Wire Range
CT-2001, CT-2002
Power Connectors
B13
PANDUIT Connector Type LCA750 LCAN750 LCB750 LCBN750 LCD750 LCDN750 LCC750 LCCN750 SCS750 SCL750 LCB800 LCBN800 LCC800 LCCN800 LCB1000 LCBN1000 LCD1000 LCC1000 LCCN1000 SCS1000 SCL1000
CT-1570
CT-1701
CT-1700
CT-720
Power Connectors
750 kcmil
800 kcmil
1000 kcmil
B14
UNI-DIE CT-980, CT-2980, CT-980CH, CT-2981, CT-980LPCH, CT-2950 Extended Wire Range
CT-2001, CT-2002
Power Connectors
B15
Power Connectors
PANDUIT Connector Type LCAS8 LCA8 LCAN8 LCB8 LCBN8 LCD8 LCDN8 LCC8 LCCN8 SCSS8 SCS8 SCL8 LCAS6 LCA6 LCAN6 LCB6 LCBN6 LCD6 LCDN6 LCC6 LCCN6 SCSS6 SCS6 SCL6 LCAS4 SCSS4 LCA4 LCAN4 LCB4 LCBN4 LCD4 LCDN4 LCC4 LCCN4 SCS4 SCL4
TBM8
#8 AWG
Red 21
Red 21
Red 21
Red 21
Red 21
#6 AWG
Blue 24
Blue 24
Blue 24
Blue 24
Blue 24
#4 AWG STR
Gray 29
Gray 29
Gray 29
Gray 29
Gray 29
B16
Power Connectors
STD
Red 21
Red 49
#8
U8CRT Red 49
U8CRT Red 49
STD
Blue 24
Blue 7
#6
U5CRT Blue 7
U5CRT Blue 7
STD
STD
Gray 29
Gray 8
#4
U4CRT Gray 8
U4CRT Gray 8
STD
Note: See page B27 for note references. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B17
Power Connectors
TBM8
#2 AWG
Brown 33
Brown 33
Brown 33
Brown 33
Brown 33
#1 AWG
Green 37
Green 37
Green 37
Green 37
1/0 AWG
Pink 42
Pink 42
Pink 42
Pink 42H
B18
Power Connectors
STD
Brown 33
Brown 10
#2
STD
STD
Green 37
#1
U1CRT Green 11
U1CRT Green 11
STD
STD
Pink 42H
1/0
U25RT Pink 12
U25RT Pink 12
STD
Note: See page B27 for note references. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B19
Power Connectors
PANDUIT Connector Type LCAS2/0 LCA2/0 LCAN2/0 LCB2/0 LCBN2/0 LCD2/0 LCDN2/0 LCC2/0 LCCN2/0 SCSS2/0 SCS2/0 SCL2/0 LCAS3/0 LCA3/0 LCAN3/0 LCB3/0 LCBN3/0 LCD3/0 LCDN3/0 LCC3/0 LCCN3/0 SCSS3/0 SCS3/0 SCL3/0 LCAS4/0 LCA4/0 LCAN4/0 LCB4/0 LCBN4/0 LCD4/0 LCDN4/0 LCC4/0 LCCN4/0 SCSS4/0 SCS4/0 SCL4/0
TBM8
2/0 AWG
Black 45
Black 45
Black 45
Black 45
3/0 AWG
Orange 50
4/0 AWG
Purple 54
Purple 54
Purple 54
Purple 54H
B20
Power Connectors
STD
Black 45
2/0
U26RT Black 13
U26RT Black 13
STD
STD
Orange 50
3/0
U27RT Orange 14
U27RT Orange 14
STD
STD
Purple 54H
4/0
U28RT Purple 15
U28RT Purple 15
STD
Note: See page B27 for note references. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B21
Power Connectors
PANDUIT Connector Type LCAS250 LCA250 LCAN250 LCB250 LCBN250 LCD250 LCDN250 LCC250 LCCN250 SCSS250 SCS250 SCL250 LCA300 LCAN300 LCB300 LCBN300 LCD300 LCDN300 LCC300 LCCN300 SCS300 SCL300 LCA350 LCAN350 LCB350 LCBN350 LCD350 LCDN350 LCC350 LCCN350 SCS350 SCL350
TBM8
250 kcmil
Yellow 62
Yellow 62
Yellow 62
Yellow 62
300 kcmil
White 66
White 66H
White 66
350 kcmil
Red 71
Red 71H
Red 71H
B22
Power Connectors
STD
Yellow 62
250
U29RT Yellow 16
U29RT Yellow 16
STD
STD
White 66
U30RT White 17
U30RT White 17
STD
STD
Red 71H
U31RT Red 18
U31RT Red 18
STD
B23
Power Connectors
PANDUIT Connector Type LCA400 LCAN400 LCB400 LCBN400 LCD400 LCDN400 LCC400 LCCN400 SCS400 SCL400 LCA500 LCAN500 LCB500 LCBN500 LCD500 LCDN500 LCC500 LCCN500 SCS500 SCL500 LCA600 LCAN600 LCB600 LCBN600 LCD600 LCDN600 LCC600 LCCN600 SCS600 SCL600
TBM8
400 kcmil
Blue 76
Blue 76H
Blue 76H
500 kcmil
Brown 87
Brown 87H
Brown 87H
600 kcmil
Green 94H
Green 94H
B24
Power Connectors
STD
Blue 76
U32RT Blue 19
U32RT Blue 19
STD
STD
Brown 87H
U34RT Brown 20
U34RT Brown 20
STD
STD
Green 94H
U36RT Green 22
U36RT Green 22
STD
B25
Power Connectors
TBM8 PANDUIT Std. Connector Die Part Number / Color Code & Die Wire Type Index Number Size LCA750 LCAN750 LCB750 LCBN750 LCD750 Black 750 Black 106H kcmil 106H LCDN750 LCC750 LCCN750 SCS750 SCL750 LCB1000 LCBN1000 LCD1000 1000 Yellow Yellow LCC1000 kcmil 125H 125H LCCN1000 SCS1000 SCL1000 Note: See page B27 for note references.
B26
Power Connectors
STD
Black 106H
U39RT Black 24
U39RT Black 24
STD
125H
S44RT White 27
The CT-1700 and CT-1701 crimp die pockets are integrated into the tool frame. Half width dies. CD-920 dies can be used with CT-940CH and CT-2940 tools with CD-940 dies to be used exclusively with CT-940CH and CT-2940 tools. Maximum size: 500 kcmil lugs and 250 kcmil splices. Maximum size: 250 kcmil lugs and splices. Requires U die adapter. Minimum size: #4 AWG lugs and splices. LCAN2 lugs for use with #2 AWG and #3 AWG wire. Extended wire range when crimped with these PANDUIT UNI-DIE Dieless
1 1
CD-940-DA adapter.
Crimping Tools, except LCAS parts. Maximum splice size for CT-920, CT920CH and CT-2920 tools is 400 kcmil.
B27
CT-1700
CT-720
CT-930
Power Connectors
CT-2001
CT-2931
CT-2940
Std. Pkg. Qty. 1
Description Ergonomic, Hand Tool; Includes 5 position color coded rotating die; Installs #8 - #1 AWG PAN-LUG Compression Connectors. Die Type, Manual, Crimping Tool; Installs #8 AWG - 500 kcmil PAN-LUG Compression Connectors. Die Type, Manual Hydraulic, 14 Ton, Crimping Tool; Includes tool case with die storage; Installs #14 AWG - 750 kcmil PAN-LUG Compression Connectors. Die Type, Battery Powered Hydraulic, 6 Ton, Crimping Tool; Includes two batteries, charger, shoulder strap, tool case; Installs #14 AWG 500 kcmil PAN-LUG Compression Connectors. Die Type, Battery Powered Hydraulic, 12 Ton, Crimping Tool; Includes two batteries, charger, tool case; Installs #14 AWG - 750 kcmil PAN-LUG Compression Connectors. Die Type, Battery Powered Hydraulic, 15 Ton, Crimping Tool; Includes two batteries, charger, shoulder strap, tool case; Installs #14 AWG - 1,000 kcmil PAN-LUG Compression Connectors.
CT-720
CT-930
CT-2001
CT-2931
CT-2940
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B28
Die Type, High Pressure Remote Hydraulic, Crimp Heads & Hydraulic Pump
CT-930CH
CT-940CH
CT-901HP
Power Connectors
CT-900HPH
CT-901RCH
CT-901RFS
Std. Pkg. Qty. 1
Description Die Type, Remote Hydraulic, 14 Ton, Crimp Head; Used with 10,000 PSI hydraulic systems; Includes tool case and female Parker type quick-connect fitting assembled to tool; Installs #14 AWG - 750 kcmil PAN-LUG Compression Connectors. Die Type, Remote Hydraulic, 15 Ton, Crimp Head; Used with 10,000 PSI hydraulic systems; Includes tool case and female Parker type quick-connect fitting assembled to tool; Installs #10 AWG - 1000 kcmil PAN-LUG Compression Connectors. Hydraulic Pump; Develops 10,000 PSI output; Includes on/off pendant switch on 10' electric cord, 3 prong A/C plug on 10' electric cord, female Parker type quick-connect fitting assembled to pump; Compatible with CT-900HPH hydraulic hose, CT-930CH, CT-940CH and CT-980CH crimp heads sold separately. Electrically Non-Conductive 10' Hose; Includes two male Parker type quick-connect fittings; Compatible with CT-901HP hydraulic pump and CT-930CH, CT-940CH and CT-980CH crimp heads, sold separately. Remote Control Handle; Incorporates plastic carrying handle with on/off activation switch for one hand operation; Used with remote hydraulic crimp heads CT-930CH, CT-940CH and CT-980CH; Includes 10' three wire control cable that can be directly connected to the CT-901HP pump. Dual Electrical Foot Switch; Allows hands-free operation of CT-901HP or CT-8250HP electric hydraulic pumps used with PANDUIT remote hydraulic crimp heads; Includes 10' electric cord.
CT-940CH
CT-901HP
CT-900HPH
CT-901RCH
CT-901RFS
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B29
Die Type, Low Pressure Remote Hydraulic, Crimp Head & Hydraulic Pump
CT-930LPCH
CT-8250HP
Power Connectors
CT-900LPHPH
CT-901RFS
Std. Pkg. Qty. 1
Description Die Type, Remote Hydraulic, 10.5 Ton, Crimp Head; Includes tool case and male Parker type quick-connect fitting assembled to tool; Installs #8 AWG 250 kcmil PAN-LUG Compression Connectors. Hydraulic Pump; Develops 7,500 PSI output; Includes on/off pendant switch on 10' electric cord, 3 prong A/C plug on 10' electric cord, male Parker type quick-connect fitting assembled to pump; Compatible with CT-900LPHPH hydraulic hose, CT-930LPCH and CT-980LPCH crimp heads sold separately. Electrically Non-Conductive 10' Hose; Includes two female Parker type quick-connect fittings; Compatible with CT-901LPHPH hydraulic pump and CT-930LPCH and CT-980LPCH crimp heads. Dual Electrical Foot Switch; Allows hands-free operation of CT-901HP or CT-8250HP electric hydraulic pumps used with PANDUIT remote hydraulic crimp heads; Includes 10' electric cord.
CT-8250HP
CT-900LPHPH
CT-901RFS
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B30
Part Description Tool kit for installing #8 AWG 500 kcmil PAN-LUG Compression Connectors; Includes seven dies (CD-720-1 through CD-720-7) and carrying/storage case (C-720). Controlled cycle tool kit for installing #8 AWG 500 kcmil PAN-LUG Compression Connectors; Includes seven dies (CD-720-1 through CD-720-7) and carrying/storage case (C-720). Tool kit for installing #8 AWG 250 kcmil PAN-LUG Compression Connectors; Includes three dies (CD-720-1 through CD-720-3) and carrying/storage case (C-720). Controlled cycle tool kit for installing #8 AWG 250 kcmil PAN-LUG Compression Connectors; I2ncludes three dies (CD-720-1 through CD-720-3) and carrying/storage case (C-720). Optional controlled cycle mechanism only. Total weight of tool with CC-720 is 8.25 lbs. Steel carrying case for CT-720 crimping tool.
Power Connectors
CT-720-7CC
CT-720-3
CT-720-3CC
CC-720 C-720
1 1
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B31
Used to Install PANDUIT Compression Lug & Splice Sizes Copper Conductor Size #8 #2 AWG Copper Aluminum Aluminum Die Color Conductor Die Color & Die No. Size & Die No. Red P21, #6 AWG Gray P29 Blue P24, Gray P29, Brown P33 Green P37, Pink P42, Black P45, Orange P50 Purple P54, Yellow P62 White P66 Red P71 Blue P76 Brown P87 Red, Blue, Yellow #4 1/0 AWG Green P37, Pink P42, Gold P45, Tan P50 Olive P54, Ruby P62 White P66 Red P71 Blue P76 Brown P87 Std. Pkg. Qty. 1
Power Connectors
CD-720-2
#1 3/0 AWG
4/0 AWG 250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil #8 #2 AWG, vinyl insulated PAN-TERM Terminals
2/0 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil 350 kcmil
1 1 1 1 1 1
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B32
Used to Install PANDUIT Compression Lug & Splice Sizes Aluminum Copper Code Copper Aluminum Std. Code Conductor Die Color & Conductor Die Color Pkg. Part Number Size Die No. & Die No. Qty. Size CD-2001-8 #8 AWG Red P21 1 CD-2001-6 CD-2001-4 #6 AWG #4 AWG STR #3 AWG STR #2 AWG SOL #2 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil Blue P24 Gray P29 #6 AWG Gray P29 1 1
Power Connectors
CD-2001-2 CD-2001-1 CD-2001-1/0 CD-2001-2/0 CD-2001-3/0 CD-2001-4/0 CD-2001-250 CD-2001-300 CD-2001-350 CD-2001-400 CD-2001-500
Brown P33 Green P37 Pink P42 Black P45 Orange P50 Purple P54 Yellow P62 White P66 Red P71 Blue P76 Brown P87
#4 AWG #2 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil
Green P37 Pink P42 Gold P45 Tan P50 Olive P54 Ruby P62 White P66 Red P71 Blue P76
1 1 1 1 1 1 1 1 1 1 1
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B33
Used to Install PANDUIT Compression Lug & Splice Sizes Copper Code Conductor Size #8 AWG #6 AWG #4 AWG #2 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil 600 kcmil Copper Die Color & Die No. Red P21 Blue P24 Gray P29 Brown P33 Green P37 Pink P42 Black P45 Orange P50 Purple P54 Yellow P62 White P66 Red P71 Blue P76 Brown P87 Green P94 Pink P99 Black P106 Aluminum Aluminum Std. Code Conductor Die Color Pkg. & Die No. Qty. Size 1 #6 AWG #4 AWG #2 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil Gray P29 Green P37 Pink P42 Gold P45 Tan P50 Olive P54 Ruby P62 White P66 Red P71 Blue P76 Brown P87 Green P94 Pink P99 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Power Connectors
Part Number CD-920-8 CD-920-6 CD-920-4 CD-920-2 CD-920-1 CD-920-1/0 CD-920-2/0 CD-920-3/0 CD-920-4/0 CD-920-250 CD-920-300 CD-920-350 CD-920-400 CD-920-500 CD-920-600
CD-920-500A 500 kcmil flex, 600 kcmil flex CD-920-750 750 kcmil
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B34
Die Adapter
Die adapter for crimping tools: CT-2940 and CT-940CH
Part Description Die Adapter for use with PANDUIT CD-920, CDM-920 and CD-930 crimping dies.
Power Connectors
Used to Install PANDUIT Compression Lug & Splice Sizes Copper Conductor Size 750 kcmil 800 kcmil 1000 kcmil Copper Aluminum Aluminum Std. Die Color Conductor Die Color & Pkg. & Die No. Size Die No. Qty. Black P106 1 Orange P107 White P125 750 kcmil 800 kcmil Red P125 Gray P140 1 1 1 1 1 1
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B35
CT-980
CT-2981
Power Connectors
CT-980CH
CT-980LPCH
Std. Pkg. Qty. 1
Description UNI-DIE Dieless, Manual Hydraulic, 6.2 Ton, Crimping Tool; Includes tool case; Installs #4 AWG - 750 kcmil PAN-LUG Compression Connectors.
CT-2981
UNI-DIE Dieless, Battery Powered Hydraulic, 6.2 Ton, Crimping Tool; Includes two batteries, charger, tool case; Installs #4 AWG - 750 kcmil PAN-LUG Compression Connectors. UNI-DIE Dieless, Remote Hydraulic, 6.2 Ton, Crimp Head used with 10,000 PSI hydraulic system; Includes tool case and female Parker type quick-connect fitting assembled to tool; Installs #4 AWG - 750 kcmil PAN-LUG Compression Connectors. UNI-DIE Dieless, Remote Hydraulic, 4.7 Ton, Crimp Head; Includes tool case and male Parker type quick-connect fitting assembled to tool; Installs #4 AWG - 250 kcmil PAN-LUG Compression Connectors.
CT-980CH
CT-980LPCH
CT-980CH to be used with CT-901HP and CT-900HPH. See page B29 for more information. CT-980LPCH to be used with CT-8250HP, CT-900LPHPH and CT-901RFS. See page B30 for more information.
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B36
Pressure Gauges
CG-920
CG-940
Power Connectors
CG-980
PG-1
Std. Pkg. Qty. 1
Description Compression Gauge; Used to measure crimping force generated by PANDUIT crimping tools: CT-930, CT-930CH, CT-930LPCH, CT-2930 and CT-2931; Includes blank die set and storage case. Compression Gauge; Used to measure output force generated by PANDUIT crimping tools: CT-940CH and CT-2940; Includes blank die set and storage case. Compression Gauge; Used to insure proper compression force for UNI-DIE Dieless Crimping Tools: CT-980, CT-980CH, CT-2980 and CT-2981; Includes fixture for mounting gauge in crimping tool and storage case. In-Line Pressure Gauge; Provides visual verification of hydraulic output pressure when used with CT-930LPCH and CT-980LPCH crimp heads, CT-8250HP pump and CT-900LPHPH hose; Includes storage case. In-Line Pressure Gauge provides visual identification of hydraulic output pressure when used with PANDUIT CT-8250HP pump and CT-900LPHPH hose; Includes steel storage case.
CG-940
CG-980
PG-1
PG-1SC
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B37
Copper Lugs
Color coded bands for proper die selection and crimp placement Internally beveled barrel end for easy conductor insertion (types LCCF and LCAF available with flared entry for flex conductor) Inspection windows available to assure complete conductor insertion Part number, stud size and conductor size marked on part for easy identification
Power Connectors
Easy-to-read, color coded die index numbers for PANDUIT and specified competitor crimping dies for selection Made from seamless, high conductivity copper tubing and electro tin plated and burnished to inhibit corrosion
Aluminum Lugs
Color coded end plugs for proper die selection Crimping areas marked on part for proper crimp placement
Easy-to-read die index numbers for PANDUIT and specified competitor crimping dies for selection Part number and conductor size marked on part for easy identification Made from seamless wrought aluminum and electro tin plated to inhibit corrosion
B38
Power Connectors
B39
Power Connectors
Part Number LCAS8-10-L LCAS8-14-L LCAS8-56-L LCAS8-38-L LCAS6-10-L LCAS6-14-L LCAS6-56-L LCAS6-38-L LCAS4-10-L LCAS4-14-L LCAS4-56-L LCAS4-38-L LCAS2-14-Q LCAS2-56-Q LCAS2-38-Q LCAS1-14-E LCAS1-56-E LCAS1-38-E LCAS1/0-38-X LCAS2/0-14-X LCAS2/0-38-X LCAS2/0-12-X LCAS3/0-38-X LCAS4/0-38-X LCAS4/0-12-X LCAS250-12-X
Stud Hole Size (In.) #10 1/4 5/16 3/8 #10 1/4
#8 AWG
#6 AWG
#4 AWG
5/16 3/8 1/4 5/16 3/8 1/4 5/16 3/8 3/8 1/4 3/8 1/2 3/8 3/8 1/2 1/2
#2 AWG
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com. Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B40
Power Connectors
Part Number LCA8-10-L LCA8-14-L LCA8-56-L LCA8-38-L LCA6-10-L LCA6-14-L LCA6-56-L LCA6-38-L LCA4-14-L LCA4-56-L LCA4-38-L LCA2-14-Q LCA2-56-Q LCA2-38-Q LCA2-12-Q LCA1-14-E LCA1-56-E LCA1-38-E LCA1-12-E LCA1/0-14-X LCA1/0-56-X LCA1/0-38-X LCA1/0-12-X LCA2/0-14-X LCA2/0-56-X LCA2/0-38-X LCA2/0-12-X
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com. continued on page B42 Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B41
Power Connectors
Part Number LCA3/0-14-X LCA3/0-56-X LCA3/0-38-X LCA3/0-12-X LCA4/0-56-X LCA4/0-38-X LCA4/0-12-X LCA250-56-X LCA250-38-X LCA250-12-X LCA300-12-X LCA350-38-X LCA350-12-X LCA400-12-6 LCA500-12-6 LCA600-12-6
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B42
Power Connectors
Part Number LCB8-14-L LCB6-14-L LCB6-38-L LCB4-14-L LCB2-56-Q LCB1-56-E LCB1/0-38-X LCB2/0-38-X LCB2/0-12-X LCB3/0-38-X LCB3/0-12-X LCB4/0-38-X LCB4/0-12-X LCB250-12-X LCB350-12-X LCB500-12-6
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B43
Power Connectors
Part Number LCD8-10A-L LCD8-14A-L LCD8-14B-L LCD8-14D-L LCD6-10A-L LCD6-14A-L LCD6-14B-L LCD6-14D-L LCD6-38D-L LCD4-14A-L LCD4-14B-L LCD4-14D-L LCD4-38D-L LCD2-14A-Q LCD2-14B-Q LCD2-14D-Q LCD2-38D-Q LCD1-14A-E LCD1-38D-E LCD1/0-38D-X LCD2/0-14B-X LCD2/0-38D-X LCD3/0-38D-X LCD4/0-38D-X LCD250-38D-X
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B44
Part Number LCC8-14A-L LCC6-14A-L LCC6-14B-L LCC6-38D-L LCC4-14A-L LCC2-56B-Q LCC2-38D-Q LCC2-38-Q LCC2-12-Q LCC1-14A-E LCC1/0-12-X LCC2/0-38D-X LCC2/0-12-X LCC3/0-12-X LCC4/0-12-X LCC250-12-X LCC300-12-X LCC350-12-X LCC400-12-6 LCC500-12-6 LCC600-12-6 LCC750-12-6
Power Connectors
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com. NEMA hole sizes and spacing.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B45
Power Connectors
Part Number SCS8-L SCS6-L SCS4-L SCS2-Q SCS1-E SCS1/0-X SCS2/0-X SCS3/0-X SCS4/0-X SCS250-X SCS350-X SCS500-6
Copper Conductor Size #8 AWG #6 AWG #4 #3 AWG STR, #2 AWG SOL #2 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 350 kcmil 500 kcmil
Length (In.) 1.50 1.75 1.75 1.87 1.87 1.87 2.00 2.12 2.12 2.25 2.37 2.87
For complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B46
Part Number SCL8-L SCL6-L SCL4-L SCL2-Q SCL1-E SCL1/0-X SCL2/0-X SCL3/0-X SCL4/0-X SCL250-X SCL350-X SCL500-6 SCL600-6
Copper Conductor Size #8 AWG #6 AWG #4 #3 AWG STR, #2 AWG SOL #2 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 350 kcmil 500 kcmil 600 kcmil
Length (In.) 2.25 2.38 2.38 2.62 2.87 2.87 3.13 3.12 3.37 3.38 4.12 4.62 5.50
Power Connectors
For complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Circular MIL Range Part Number PS8-L PS6-L PS2-Q PS4/0-X Min. 19,000 25,000 65,000 240,000 Max. 25,000 40,000 100,000 280,000
For complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com. Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B47
Power Connectors
Flex Conductor Size Part Number LCAX8-10-L LCAX8-14-L LCAX8-56-L LCAX8-38-L LCAX6-10-L LCAX6-14-L LCAX6-56-L LCAX6-38-L LCAX4-14-L LCAX4-56-L LCAX4-38-L LCAX2-14-E LCAX2-56-E LCAX2-38-E LCAX2-12-E LCAX1-14-X LCAX1-56-X LCAX1-38-X LCAX1-12-X LCAX1/0-14-X LCAX1/0-56-X LCAX1/0-38-X LCAX1/0-12-X 1/0 AWG 1/0 AWG #1 AWG #1 AWG #2 AWG #2 AWG #4 AWG #5, #4, #3 AWG #6 AWG #6 AWG #8 AWG #8 AWG Class G, H, I, K, M Locomotive
Stud Hole Std. Size Pkg. (In.) Qty. #10 50 1/4 5/16 3/8 #10 1/4 5/16 3/8 1/4 5/16 3/8 1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 50 50 50 50 50 50 50 50 50 50 20 20 20 20 10 10 10 10 10 10 10 10
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B48
Power Connectors
Flex Conductor Size Part Number LCAX2/0-14-X LCAX2/0-56-X LCAX2/0-38-X LCAX2/0-12-X LCAX3/0-14-X LCAX3/0-56-X LCAX3/0-38-X LCAX3/0-12-X LCAX4/0-56-X LCAX4/0-38-X LCAX4/0-12-X LCAX250-56-X LCAX250-38-X LCAX250-12-X LCAX300-12-6 LCAX350-38-6 LCAX350-12-6 LCAX500-12-6 350 kcmil 500 kcmil 373.7 kcmil 535.3 kcmil 300 kcmil 313.1 kcmil 250 kcmil 262.6 kcmil 4/0 AWG 4/0 AWG 3/0 AWG 3/0 AWG 2/0 AWG 2/0 AWG Class G, H, I, K, M Locomotive
Stud Hole Std. Size Pkg. (In.) Qty. 1/4 10 5/16 3/8 1/2 1/4 5/16 3/8 1/2 5/16 3/8 1/2 5/16 3/8 1/2 1/2 3/8 1/2 1/2 10 10 10 10 10 10 10 10 10 10 10 10 10 6 6 6 6
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B49
Power Connectors
Part Number LCAF6-14-L LCAF6-38-L LCAF4-14-L LCAF4-38-L LCAF2-14-E LCAF2-38-E LCAF1-38-X LCAF1/0-14-X LCAF1/0-56-X LCAF1/0-38-X LCAF1/0-12-X LCAF2/0-38-X LCAF2/0-12-X LCAF3/0-38-X LCAF3/0-12-X LCAF4/0-38-X LCAF4/0-12-X LCAF250-12-X LCAF350-12-6 LCAF400-12-6 LCAF600-12-6
Stud Hole Size (In.) 1/4 3/8 1/4 3/8 1/4 3/8 3/8 1/4 5/16
1/0 AWG
1/0 AWG
2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 350 kcmil 400 kcmil
2/0 AWG 3/0 AWG 4/0 AWG 262.6 kcmil 373.7 kcmil 444.4 kcmil 646.4 kcmil
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B50
Power Connectors
Flex Conductor Size Class G, H, I, K, M #8 AWG #6 AWG #4 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 350 kcmil 500 kcmil Stud Hole Size (In.) 1/4 1/4 #6 AWG #5, #4, #3 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 373.7 kcmil 535.3 kcmil 3/8 1/4 5/16 3/8 3/8 1/2 3/8 3/8 1/2 1/2 1/2 Std. Pkg. Qty. 50 50 50 50 10 10 10 10 10 10 10 6 6
Part Number LCBX8-14-L LCBX6-14-L LCBX6-38-L LCBX4-14-L LCBX1-56-X LCBX1/0-38-X LCBX2/0-38-X LCBX2/0-12-X LCBX3/0-38-X LCBX4/0-38-X LCBX4/0-12-X LCBX350-12-6 LCBX500-12-6
Locomotive #8 AWG
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B51
Power Connectors
Part Number LCDX8-10A-L LCDX8-14A-L LCDX8-14B-L LCDX8-14D-L LCDX6-10A-L LCDX6-14A-L LCDX6-14B-L LCDX6-14D-L LCDX6-38D-L LCDX4-14A-L LCDX4-14B-L LCDX4-14D-L LCDX4-38D-L LCDX2-14A-E LCDX2-14B-E LCDX2-14D-E LCDX2-38D-E LCDX1-14A-X LCDX1-38D-X LCDX1/0-38D-X LCDX2/0-14B-X LCDX2/0-38D-X LCDX3/0-38D-X LCDX3/0-12-X LCDX4/0-38D-X LCDX250-38D-X LCDX250-12-X LCDX300-12-6 LCDX600-12-6 LCDX750-12-3
#8 AWG
#8 AWG
#6 AWG
#6 AWG
#4 AWG
#2 AWG
#2 AWG
#1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil 600 kcmil
#1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 3/0 AWG 4/0 AWG 262.6 kcmil 313.1 kcmil 777.7 kcmil
Stud Hole Std. Size Pkg. (In.) Qty. #10 50 1/4 50 1/4 50 1/4 50 #10 50 1/4 50 1/4 50 1/4 50 3/8 50 1/4 50 1/4 50 1/4 50 3/8 50 1/4 20 1/4 20 1/4 20 3/8 20 1/4 10 3/8 10 3/8 10 1/4 10 3/8 10 3/8 10 1/2 10 3/8 10 3/8 10 1/2 10 1/2 6 1/2 6 1/2 3
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com. NEMA hole sizes and spacing. Prime items appear in BOLD. Order number of pieces required, in multiples of Standard Package Quantity.
B52
Power Connectors
Flex Conductor Size Part Number LCCX8-14A-L LCCX6-14A-L LCCX6-14B-L LCCX6-38D-L LCCX4-14A-L LCCX2-38D-E LCCX2-12-E LCCX1-14A-X LCCX1/0-12-X LCCX2/0-38D-X LCCX2/0-12-X LCCX4/0-12-X LCCX350-12-6 LCCX500-12-6 2/0 AWG 4/0 AWG 350 kcmil 500 kcmil 2/0 AWG 4/0 AWG 373.7 kcmil 535.3 kcmil #2 AWG #1 AWG 1/0 AWG #2 AWG #1 AWG 1/0 AWG #4 AWG #5, #4, #3 AWG #6 AWG #6 AWG Class G, H, I, K, M #8 AWG Locomotive #8 AWG
Stud Hole Size (In.) 1/4 1/4 1/4 3/8 1/4 3/8 1/2 1/4 1/2 3/8 1/2 1/2 1/2 1/2
For 45 and 90 bent lugs available as standard parts and complete tool and die information, see the Electrical Solutions Catalog, SA-ELCB03, at www.panduit.com. NEMA hole sizes and spacing.
Prime items appear in BOLD. For service and technical support, call 800-777-3300 or visit www.panduit.com.
B53
Logo (Symbol)
Agency
Spec/Approval
Requirement
Applicable Products
#E52164 UL486A
Minimum Tensile Strength (Pull out All Ring and force for the crimp Fork terminal) and test Terminals current for Max. 50C Rise (Amps) Minimum Tensile Strength (Pull out force for the crimp terminal) and continuous test All current for Max. Disconnects 30C Rise (Amps) (for .187", .205", .250" tab widths) and (.110" tab width) Minimum Tensile Strength (Pull out force for the crimp All Splices terminal) and test current for Max. 50C Rise (Amps) All Ring and Fork Terminals All Disconnects
Technical Information
#E52164 UL486C
Minimum Tensile Strength (Pull out force for the crimp terminal) and test #LR31212 C22.2 No. 153 current for Max. 50C Rise (Amps)
C1
Performance Requirements
Applicable PAN-TERM products meet or exceed the following test specifications: UL486A (Terminals) UL486C (Splices) UL310 (Blade Adapters) CSA C22.2 No. 65 (all designs)
UL and CSA approved products are shown with the applicable logos in the product section. UL file #E52164, CSA File #LR31212
Wire Size (AWG) #26 #24 #22 #20 #18 #16 #14 #12 #10
UL 486C (SPLICES)
Test Current for Max. 50C Rise (Amps) 5.5 7 9 8 12 10 17 10 18 15 30 25 35 35 50 40
Technical Information
Applicable PAN-TERM products meet or exceed the following test specifications: UL310 (Disconnects) CSA C22.2 No. 153 (all designs) UL and CSA Listed products are shown with the applicable logos in the product section. UL file #E78522 and CSA file #LR31212.
Wire Size (AWG) #22 #20 #18 #16 *#14 #12 #10
UL310 (DISCONNECTS)
Continuous Test Current for Max. 30C Rise (amps) (for 187", 205", 250" tab widths) Continuous Test Current for Max. 30C Rise (amps) (for .110", tab width) Min. Tensile Strength* (Lbs.) *Pull-out force of the crimped disconnect. 3 4 7 10 15 20 24
2 8
3 13
4 20
5 30
Not Applicable 50 70 80
C2
Logo (Symbol)
Spec/Approval
Applicable Products
UL 486A CLRCVR, HTCT, CTAPF, CTAP, Wire Connectors & LCAX, LCBX, LCCX, LCDX, LCAN, Soldering Lugs LCDN, RSC, LCEX for use in US & Canada Copper & aluminum compression connectors (except: PS, SCT, HTAP, TAPC, SAR); Copper & aluminum split bolts; Copper & aluminum mechanical lugs & splices (except: PNLC, LAM2A1000, LAM3B, LAM3D, LAM4D, PCSB750, LAM2LB800)
UL 467 Grounding & Bonding SP1, SP2, SPF1, SPF2, GPL, Equipment GMS, GM for use in US & Canada UL 467 Grounding & Bonding Equipment for use in US UL 486A Wire Connectors & Soldering Lugs for use in US CTAP, KP, WB, GC
Technical Information
Copper & aluminum compression connectors (except: PS, SCT, HTAP, TAPC, SAR, CTAP, BPC); Copper & aluminum split bolts (except: SBCL, VT, VTA); Copper & aluminum mechanical lugs & splices (except: ML, ML-T, HL, HLB, HLA-90, PNL-2, HL-2, HL-2N, HHL-2N, H2L-2N, P2NLT, PNLC, HC, LAM2A1000, LAM2B, LAM2SB600, LAM2SB750, LAM3B, LAM3D, LAM4D, PCSB750) WB, KP Copper compression connectors LCA, LCAF, LCAS, LCAX, LCB, LCC, LCD, S-R, LCDX, SCS, SCSF Copper compression connectors LCAS, LCA, LCD, LCB, LCC, LCAF, LCCF, SCSS, SCS, SCL, SCSF
C22.2 No. 41-M1987 (R1999) Grounding & Bonding Equipment ABS Rules Steel Vessel Rules 1-1-4/7.7, 4-8-3/9.19, 4-8-4/21.27 Network Equipment Building Systems
NEBS Level 3
C3
Technical Information C4
#2
#4
#5
#6
#8
#10
1/4"
.250" .270" 14
5/16"
.312" .343" 56
Stud Size Decimal .086" .112" Equivalent Terminal Hole Diameter Stud Size Designation in PANDUIT Part Number .090" .118" 2 4
Standard Stud Size Stud Size Decimal Equivalent Terminal Hole Diameter Stud Size Designation in PANDUIT Part Number
3/8"
.375" .392"* .406"** 38
7/16"
.438" .456" 76
1/2"
.500" .531" 12
5/8"
.625" .656"
Technical Information
58
Standard Stud Size Stud Size Decimal Equivalent Terminal Hole Diameter Stud Size Designation in PANDUIT Part Number
3/4"
.750" .810" 34
7/8"
.875" .906" 78
1"
1.00" 1.031" 1
*Terminal Stud. **Power Connector Stud. For service and technical support, call 800-777-3300 or visit www.panduit.com.
C5
No. 25 41 10 1 26 7 19 41 10 1 24 7 19 65 128 0.25 32 14 1 16 26 22 7 19 48 194 100 0.38 7 12 21 7 16 0.5 1 *10 1 41 20 26 *7 19 7 24 0.75 1 *16 1 65 18 41 *7 19 *Strandings required for UL
AWG
mm .05 .05 .13 .41 .16 .10 .08 .16 .51 .20 .13 .07 .05 .10 .16 .64 .16 .13 .25 .16 .10 .05 .07 .27 .21 .16 .30 .20 .80 .25 .81 .13 .16 .32 .20 .37 .20 1.00 .25 1.02 .13 .16 .40 .25 and CSA
In. mm In. .002 .25 .010 .002 .36 .014 .005 .53 .021 .016 .41 .016 .006 .48 .019 .004 .51 .020 .003 .58 .023 .006 .58 .023 .020 .51 .020 .008 .61 .024 .005 .61 .024 .003 .65 .026 .002 .65 .026 .004 .65 .026 .006 .65 .026 .025 .64 .025 .006 .76 .030 .005 .76 .030 .010 .76 .030 .006 .79 .031 .004 .80 .031 .002 .80 .031 .003 .80 .031 .011 .80 .031 .008 .80 .031 .006 .80 .031 .012 .90 .035 .008 .90 .035 .031 .80 .031 .010 .89 .035 .032 .81 .032 .005 .91 .036 .006 91 .036 .013 .97 .038 .008 .94 .037 .015 1.10 .043 .008 1.20 .047 .039 1.00 .039 .010 1.19 .047 .040 1.02 .040 .005 1.19 .047 .006 1.19 .047 .016 1.22 .048 .010 1.24 .049 Certification testing.
Technical Information C6
No. 19 1 1.0 32 7 19 65 *26 16 1 105 *7 30 21 189 1.5 7 1 45 19 1 14 *41 *7 50 7 35 2.5 315 1 19 *65 165 12 1 *7 56 1 4.0 511 19 37 49 *7 10 1 *105 84 756 1 6.0 7 19 *Strandings required for UL
AWG
mm 0.25 1.13 .20 .43 .29 .16 .25 1.30 .13 .51 .25 .30 .10 .52 1.38 .16 .38 1.63 .25 .64 .25 .67 .30 .10 1.78 .45 .25 .16 2.06 .81 .30 2.26 .10 .52 .40 .36 .98 2.59 .25 .30 .10 2.76 1.05 .64 and CSA
In. mm In. .010 1.30 .051 .044 1.13 .044 .008 1.30 .051 .017 1.30 .051 .011 1.47 .058 .006 1.50 .059 .010 1.50 .059 .051 1.30 .051 .005 1.50 .059 .020 1.52 .060 .010 1.70 .067 .012 1.60 .063 .004 1.90 .075 .020 1.60 .063 .054 1.38 .054 .006 1.85 .073 .014 1.85 .073 .064 1.63 .064 .010 1.85 .073 .025 1.85 .073 .010 2.20 .087 .026 2.10 .083 .012 2.20 .087 .004 2.20 .087 .070 1.78 .070 .018 2.36 .093 .010 2.41 .095 .006 2.41 .095 .081 2.06 .081 .032 2.44 .096 .012 3.10 .122 .089 2.26 .089 .004 3.00 .118 .020 2.70 .106 .016 2.92 .115 .014 2.95 .116 .039 2.95 .116 .102 2.59 .102 .010 2.95 .116 .012 3.50 .138 .004 3.70 .146 .109 2.76 .109 .041 3.20 .126 .025 3.30 .130 Certification testing.
Technical Information
C7
AWG
No. 7 1 7 1 1 7 7 1 7 1 7 1 7 7 7 7
mm 0.107 2.77 1.1 2.91 3.26 1.23 1.37 3.58 1.38 3.67 1.55 4.11 1.73 1.75 1.96 2.16 1.32 2.2 2.47 2.54 1.55 1.5 1.85 1.59 2.13 2.18 2.59 1.71 2.57 1.83 2.89
In. 0.042 0.109 0.0432 0.1144 0.1285 0.0486 0.054 0.141 0.0545 0.1443 0.0612 0.162 0.008 0.0688 0.0772 0.085 0.052 0.0867 0.0974 0.1 0.001 0.0064 0.073 0.0745 0.0837 0.086 0.094 0.0673 0.101 0.072 0.1055
mm 3.21 2.77 3.3 2.91 3.25 3.7 4.12 3.58 4.15 3.67 4.66 4.11 5.13 5.24 5.88 6.48 6.6 6.61 7.42 7.62 7.75 8.43 9.27 9.46 10.6 10.9 11.9 12 12.8 12.5 13.4
In. 0.126 0.109 0.13 0.114 0.128 0.146 0.162 0.141 0.164 0.144 0.184 0.162 0.204 0.206 0.232 0.255 0.26 0.26 0.292 300 0.305 0.332 0.365 0.373 0.419 0.43 0.47 0.471 0.505 0.504 0.528
Technical Information
19 7 7 7 19 19 19 19 19 19 19 36 19 37 19
C8
AWG
No. 37 37
mm 2.06 2.07 2.29 2.47 2.54 2.64 2.9 2.26 2.95 2.3 2.51 2.52 2.72 2.82 2.31 2.9 2.91 2.38 3.25 2.66 2.97
In. 0.081 0.0822 0.09 0.0973 0.1 0.104 0.114 0.089 0.1162 0.0905 0.099 0.0992 0.1071 0.1109 0.0908 0.114 0.1145 0.0938 0.128 0.1048 0.117
mm 14.4 14.6 16 17.3 17.8 18.5 20.3 20.3 20.7 20.7 22.6 22.7 24.5 25.4 25.4 26.1 26.2 26.2 28.3 29.3 32.7
In. 0.567 0.575 0.63 0.681 0.7 0.728 0.798 0.801 0.813 0.814 0.891 0.893 0.964 0.998 0.998 1.026 1.031 1.032 1.152 1.153 1.287
150
37 37
37 37 37 61 37
500 kcmil 300 kcmil 600 kcmil 700 kcmil 750 kcmil 400
61 61 61 61 61 91 61 61
Technical Information
91 61 91 91
C9
Page No.
Page No.
C
C-720.............................B31 CC-720 ..........................B31 CD-2001-1 .....................B33 CD-2001-1/0 ..................B33 CD-2001-2 .....................B33 CD-2001-2/0 ..................B33 CD-2001-250 .................B33 CD-2001-3/0 ..................B33 CD-2001-300 .................B33 CD-2001-350 .................B33 CD-2001-4 .....................B33 CD-2001-4/0 ..................B33 CD-2001-400 .................B33 CD-2001-500 .................B33 CD-2001-6 .....................B33 CD-2001-8 .....................B33 CD-720-1 .......................B32 CD-720-2 .......................B32 CD-720-3 .......................B32 CD-720-4 .......................B32 CD-720-5 .......................B32
CD-720-6 .......................B32 CD-720-7 .......................B32 CD-720PV8-2 ................B32 CD-920-1 .......................B34 CD-920-1/0 ....................B34 CD-920-2 .......................B34 CD-920-2/0 ....................B34 CD-920-250 ...................B34 CD-920-3/0 ....................B34 CD-920-300 ...................B34 CD-920-350 ...................B34 CD-920-4 .......................B34 CD-920-4/0 ....................B34 CD-920-400 ...................B34 CD-920-500 ...................B34 CD-920-500A.................B34 CD-920-6 .......................B34 CD-920-600 ...................B34 CD-920-750 ...................B34 CD-920-8 .......................B34 CD-940-1000 .................B35 CD-940-1000A...............B35 CD-940-750 ...................B35 CD-940-750A.................B35 CD-940-750X.................B35 CD-940-800 ...................B35 CD-940-800A.................B35 CD-940-DA ....................B35 CG-920 ..........................B37 CG-940 ..........................B37 CG-980 ..........................B37 CST101 .........................A19 CST114-157 ..................A19 CST115 .........................A19 CT-100 ...........................A16 CT-1002 .........................A18
Index
D1
Page No.
CT-1003 .........................A18 CT-1004 .........................A18 CT-1005 .........................A18 CT-1006 .........................A18 CT-1014 .........................A17 CT-1015 .........................A17 CT-1525 .........................A17 CT-1550 .........................A17 CT-1551 .........................A17 CT-1570 .........................A17 CT-160 ...........................A16 CT-1700.................A17, B28 CT-1701 .........................A17 CT-200 ...........................A16 CT-2001 .........................B28 CT-260 ...........................A16 CT-2931 .........................B28 CT-2940 .........................B28 CT-2981 .........................B36 CT-300-1 ........................A18 CT-720 ...........................B28 CT-720-3 ........................B31 CT-720-3CC...................B31 CT-720-7 ........................B31 CT-720-7CC...................B31 CT-8250HP ....................B30 CT-900HPH....................B29 CT-900LPHPH ...............B30 CT-901HP ......................B29 CT-901RCH ...................B29 CT-901RFS ...........B29, B30 CT-930 ...........................B28 CT-930CH ......................B29 CT-930LPCH..................B30 CT-940CH ......................B29 CT-980 ...........................B36
D
D14-250B-C...................A34 D14-250MB-C................A38 D-250A-C.......................A34 DNF10-250FI-L..............A33 DNF10-250FIB-L ...........A32 DNF10-250FIMB-L ........A33 DNF10-250M-L..............A37 DNF14-187FIB-C...........A32 DNF14-188FIB-C...........A32 DNF14-205FIB-C...........A32 DNF14-206FIB-C...........A32 DNF14-250FIB-C...........A32 DNF14-250FIM-C ..........A33 DNF14-250FIMB-L ........A33 DNF14-250M-C .............A37 DNF18-110FIB-C...........A32 DNF18-111FIB-C...........A32 DNF18-187FIB-C...........A32 DNF18-188FIB-C...........A32 DNF18-205FIB-C...........A32 DNF18-206FIB-C...........A32 DNF18-250FIB-C...........A32 DNF18-250FIB-C...........A33 DNF18-250FIM-C ..........A33 DNF18-250M-C .............A37 DNFR14-250B-C ...........A35 DNFR14-250FIB-C ........A35 DNFR18-250B-C ...........A35 DNFR18-250FIB-C ........A35 DR10-250-L ...................A36 DR14-250B-C ................A36
Index D2
Page No.
DR14-250-C ..................A36 DV14-145M-C................A38 DV14-187B-C ................A33 DV14-188B-C ................A33 DV14-205B-C ................A33 DV14-250B-C ................A33 DV14-250MB-C .............A37 DV14-250P-C ................A34 DV18-145M-CY .............A38 DV18-187B-CY ..............A33 DV18-188B-CY ..............A33 DV18-250B-C ................A33 DV18-250MB-C .............A37 DV18-250P-CY ..............A34
F
F73-5-M .........................A48 F73-7-M .........................A48 F74-5-M .........................A48 F75-10-M .......................A48 F75-6-M .........................A48 F75-8-M .........................A48 F76-10-M .......................A48 F76-6-M .........................A48 F76-8-M .........................A48 F77-6-M .........................A48 F77-7-M .........................A48 F77-8-M .........................A48 F78-10-M .......................A48 F78-7-M .........................A48 F78-8-M .........................A48 F80-10-M .......................A48 F80-7-M .........................A48 F80-8-M .........................A48 F81-10-M .......................A48
F81-12-M .......................A48 F81-9-M .........................A48 F82-10-M .......................A48 F82-12-M .......................A48 F82-15-M .......................A48 F83-12-D .......................A49 F83-15-D .......................A49 F83-18-D .......................A49 F84-12-TL......................A49 F84-15-TL......................A49 F84-18-TL......................A49 F85-12-C .......................A49 F85-15-C .......................A49 F85-18-C .......................A49 F86-18-C .......................A49 F86-20-C .......................A49 F86-25-C .......................A49 F87-18-C .......................A49 F87-22-C .......................A49 F87-25-C .......................A49 FSD74-6-D ....................A46 FSD74-8-D ....................A46 FSD75-10-D ..................A46 FSD75-6-D ....................A46 FSD75-8-D ....................A46 FSD76-6-D ....................A46 FSD76-8-D ....................A46 FSD77-10-D ..................A46 FSD77-12-D ..................A46 FSD77-6-D ....................A46 FSD77-8-D ....................A46 FSD78-10-D ..................A46 FSD78-12-D ..................A46 FSD78-6-D ....................A46 FSD78-8-D ....................A46 FSD79-8-D ....................A46
Index
D3
Page No.
FSD80-12-D ..................A46 FSD80-8-D ....................A46 FSD81-10-D ..................A46 FSD81-12-C ..................A46 FSD82-12-C ..................A46 FSD83-12-C ..................A46 FTD75-8-D.....................A47 FTD76-10-D...................A47 FTD76-8-D.....................A47 FTD77-10-D...................A47 FTD77-8-D.....................A47 FTD78-12-D...................A47 FTD78-8-D.....................A47 FTD80-10-TL .................A47 FTD80-13-TL .................A47 FTD81-12-C...................A47 FTD82-14-C...................A47
J
J214-312-T ....................A44 J318-412-T ....................A44 JN218-216-C .................A44 JN224-318-C .................A44 JN418-212-C .................A44
K
K-1000 ...........................A50 K-1102 ...........................A50 K-1104 ...........................A50 K1-PNKIT ......................A51 K2-PVKIT.......................A52 KP-1075.........................A50 KP-1165.........................A40
LCA1-12-E.....................B41 LCA1-14-E.....................B41 LCA1-38-E.....................B41 LCA1-56-E.....................B41 LCA1/0-12-X..................B41 LCA1/0-14-X..................B41 LCA1/0-38-X..................B41 LCA1/0-56-X..................B41 LCA2-12-Q ....................B41 LCA2-14-Q ....................B41 LCA2-38-Q ....................B41 LCA2-56-Q ....................B41 LCA2/0-12-X..................B41 LCA2/0-14-X..................B41 LCA2/0-38-X..................B41 LCA2/0-56-X..................B41 LCA250-12-X.................B42 LCA250-38-X.................B42 LCA250-56-X.................B42 LCA3/0-12-X..................B42 LCA3/0-14-X..................B42 LCA3/0-38-X..................B42 LCA3/0-56-X..................B42 LCA300-12-X.................B42 LCA350-12-X.................B42 LCA350-38-X.................B42 LCA4-14-L .....................B41 LCA4-38-L .....................B41 LCA4-56-L .....................B41 LCA4/0-12-X..................B42 LCA4/0-38-X..................B42 LCA4/0-56-X..................B42 LCA400-12-6 .................B42 LCA500-12-6 .................B42 LCA6-10-L .....................B41
Index D4
Page No.
LCA6-14-L .....................B41 LCA6-38-L .....................B41 LCA6-56-L .....................B41 LCA600-12-6 .................B42 LCA8-10-L .....................B41 LCA8-14-L .....................B41 LCA8-38-L .....................B41 LCA8-56-L .....................B41 LCAF1-38-X...................B50 LCAF1/0-12-X................B50 LCAF1/0-14-X................B50 LCAF1/0-38-X................B50 LCAF1/0-56-X................B50 LCAF2-14-E...................B50 LCAF2-38-E...................B50 LCAF2/0-12-X................B50 LCAF2/0-38-X................B50 LCAF250-12-X...............B50 LCAF3/0-12-X................B50 LCAF3/0-38-X................B50 LCAF350-12-6 ...............B50 LCAF4-14-L ...................B50 LCAF4-38-L ...................B50 LCAF4/0-12-X................B50 LCAF4/0-38-X................B50 LCAF400-12-6 ...............B50 LCAF6-14-L ...................B50 LCAF6-38-L ...................B50 LCAF600-12-6 ...............B50 LCAS1-14-E ..................B40 LCAS1-38-E ..................B40 LCAS1-56-E ..................B40 LCAS1/0-38-X ...............B40 LCAS2-14-Q ..................B40 LCAS2-38-Q ..................B40 LCAS2-56-Q ..................B40
LCAS2/0-12-X ...............B40 LCAS2/0-14-X ...............B40 LCAS2/0-38-X ...............B40 LCAS250-12-X ..............B40 LCAS3/0-38-X ...............B40 LCAS4-10-L...................B40 LCAS4-14-L...................B40 LCAS4-38-L...................B40 LCAS4-56-L...................B40 LCAS4/0-12-X ...............B40 LCAS4/0-38-X ...............B40 LCAS6-10-L...................B40 LCAS6-14-L...................B40 LCAS6-38-L...................B40 LCAS6-56-L...................B40 LCAS8-10-L...................B40 LCAS8-14-L...................B40 LCAS8-38-L...................B40 LCAS8-56-L...................B40 LCAX1-12-X ..................B48 LCAX1-14-X ..................B48 LCAX1-38-X ..................B48 LCAX1-56-X ..................B48 LCAX1/0-12-X ...............B48 LCAX1/0-14-X ...............B48 LCAX1/0-38-X ...............B48 LCAX1/0-56-X ...............B48 LCAX2-12-E ..................B48 LCAX2-14-E ..................B48 LCAX2-38-E ..................B48 LCAX2-56-E ..................B48 LCAX2/0-12-X ...............B49 LCAX2/0-14-X ...............B49 LCAX2/0-38-X ...............B49 LCAX2/0-56-X ...............B49 LCAX250-12-X ..............B49
Index
D5
Page No.
LCAX250-38-X ..............B49 LCAX250-56-X ..............B49 LCAX3/0-12-X ...............B49 LCAX3/0-14-X ...............B49 LCAX3/0-38-X ...............B49 LCAX3/0-56-X ...............B49 LCAX300-12-6...............B49 LCAX350-12-6...............B49 LCAX350-38-6...............B49 LCAX4-14-L...................B48 LCAX4-38-L...................B48 LCAX4-56-L...................B48 LCAX4/0-12-X ...............B49 LCAX4/0-38-X ...............B49 LCAX4/0-56-X ...............B49 LCAX500-12-6...............B49 LCAX6-10-L...................B48 LCAX6-14-L...................B48 LCAX6-38-L...................B48 LCAX6-56-L...................B48 LCAX8-10-L...................B48 LCAX8-14-L...................B48 LCAX8-38-L...................B48 LCAX8-56-L...................B48 LCB1-56-E.....................B43 LCB1/0-38-X..................B43 LCB2-56-Q ....................B43 LCB2/0-12-X..................B43 LCB2/0-38-X..................B43 LCB250-12-X.................B43 LCB3/0-12-X..................B43 LCB3/0-38-X .................B43 LCB350-12-X.................B43 LCB4-14-L .....................B43 LCB4/0-12-X..................B43 LCB4/0-38-X..................B43
LCB500-12-6 .................B43 LCB6-14-L .....................B43 LCB6-38-L .....................B43 LCB8-14-L .....................B43 LCBX1-56-X ..................B51 LCBX1/0-38-X ...............B51 LCBX2/0-12-X ...............B51 LCBX2/0-38-X ...............B51 LCBX3/0-38-X ...............B51 LCBX350-12-6...............B51 LCBX4-14-L...................B51 LCBX4/0-12-X ...............B51 LCBX4/0-38-X ...............B51 LCBX500-12-6...............B51 LCBX6-14-L...................B51 LCBX6-38-L...................B51 LCBX8-14-L...................B51 LCC1-14A-E ..................B45 LCC1/0-12-X..................B45 LCC2-12-Q ....................B45 LCC2-38-Q ....................B45 LCC2-38D-Q..................B45 LCC2-56B-Q..................B45 LCC2/0-12-X..................B45 LCC2/0-38D-X ...............B45 LCC250-12-X.................B45 LCC3/0-12-X..................B45 LCC300-12-X.................B45 LCC350-12-X.................B45 LCC4-14A-L...................B45 LCC4/0-12-X..................B45 LCC400-12-6 .................B45 LCC500-12-6 .................B45 LCC6-14A-L...................B45 LCC6-14B-L...................B45 LCC6-38D-L ..................B45
Index D6
Page No.
LCC600-12-6 .................B45 LCC750-12-6 .................B45 LCC8-14A-L...................B45 LCCX1-14A-X................B53 LCCX1/0-12-X ...............B53 LCCX2-12-E ..................B53 LCCX2-38D-E................B53 LCCX2/0-12-X ...............B53 LCCX2/0-38D-X.............B53 LCCX350-12-6...............B53 LCCX4-14A-L ................B53 LCCX4/0-12-X ...............B53 LCCX500-12-6...............B53 LCCX6-14A-L ................B53 LCCX6-14B-L ................B53 LCCX6-38D-L ................B53 LCCX8-14A-L ................B53 LCD1-14A-E ..................B44 LCD1-38D-E ..................B44 LCD1/0-38D-X ...............B44 LCD2-14A-Q..................B44 LCD2-14B-Q..................B44 LCD2-14D-Q..................B44 LCD2-38D-Q..................B44 LCD2/0-14B-X ...............B44 LCD2/0-38D-X ...............B44 LCD250-38D-X . . . . . . .B44 LCD3/0-38D-X ...............B44 LCD4-14A-L...................B44 LCD4-14B-L...................B44 LCD4-14D-L ..................B44 LCD4-38D-L ..................B44 LCD4/0-38D-X ...............B44 LCD6-10A-L...................B44 LCD6-14A-L...................B44 LCD6-14B-L...................B44
LCD6-14D-L ..................B44 LCD6-38D-L ..................B44 LCD8-10A-L...................B44 LCD8-14A-L...................B44 LCD8-14B-L...................B44 LCD8-14D-L ..................B44 LCDX1-14A-X................B52 LCDX1-38D-X................B52 LCDX1/0-38D-X.............B52 LCDX2-14A-E................B52 LCDX2-14B-E................B52 LCDX2-14D-E................B52 LCDX2-38D-E................B52 LCDX2/0-14B-X.............B52 LCDX2/0-38D-X.............B52 LCDX250-12-X ..............B52 LCDX250-38D-X............B52 LCDX3/0-12-X ...............B52 LCDX3/0-38D-X.............B52 LCDX300-12-6 . . . . . . .B52 LCDX4-14A-L ................B52 LCDX4-14B-L ................B52 LCDX4-14D-L ................B52 LCDX4-38D-L ................B52 LCDX4/0-38D-X.............B52 LCDX6-10A-L ................B52 LCDX6-14A-L ................B52 LCDX6-14B-L ................B52 LCDX6-14D-L ................B52 LCDX6-38D-L ................B52 LCDX600-12-6...............B52 LCDX750-12-3...............B52 LCDX8-10A-L ................B52 LCDX8-14A-L ................B52 LCDX8-14B-L ................B52 LCDX8-14D-L ................B52
Index
D7
Page No.
Page No.
PG-1SC .........................B37 PS12-L...........................A42 PS16-C ..........................A42 PS2-Q............................B47 PS4/0-X .........................B47 PS6-L.............................B47 PS8-L.............................B47 PSN16-C .......................A42 PSN18-C .......................A42 PV10-10F-L ...................A25 PV10-10LF-L .................A27 PV10-10R-L...................A22 PV10-10RX-L ................A23 PV10-14F-L ...................A25 PV10-14LF-L .................A27 PV10-14R-L...................A22 PV10-14RX-L ................A23 PV10-38R-L...................A22 PV10-56R-L...................A22 PV10-610R-L.................A23 PV10-6F-L .....................A25 PV10-6LF-L ...................A27 PV10-6R-L.....................A22 PV10-8F-L .....................A25 PV10-8LF-L ...................A27 PV10-8R-L.....................A22 PV10-P55-L ...................A28 PV14-10F-C...................A25 PV14-10LF-C.................A27 PV14-10FN-C ................A25 PV14-10R-C ..................A22 PV14-10RX-C................A23 PV14-14F-C...................A25 PV14-14R-C ..................A22 PV14-38R-L...................A22 PV14-4R-C ....................A22
Index D8
Page No.
PV14-56R-C ..................A22 PV14-610R-C ................A23 PV14-6F-C.....................A25 PV14-6FN-C ..................A25 PV14-6LF-C...................A27 PV14-6R-C ....................A22 PV14-6RN-C..................A22 PV14-8F-C.....................A25 PV14-8LF-C...................A27 PV14-8R-C ....................A22 PV14-P47-C ..................A28 PV18-10F-CY ................A25 PV18-10LF-CY ..............A27 PV18-10R-CY................A22 PV18-14R-CY................A22 PV18-38R-CY................A22 PV18-4R-CY..................A22 PV18-56R-CY................A22 PV18-610R-CY..............A23 PV18-6F-CY ..................A25 PV18-6FN-CY................A25 PV18-6LF-CY ................A27 PV18-6R-CY..................A22 PV18-8F-CY ..................A25 PV18-8LF-CY ................A27 PV18-8R-CY..................A22 PV18-P47-CY ................A28 PV22-6F-C.....................A25
SCL1-E ..........................B47 SCL1/0-X .......................B47 SCL2-Q..........................B47 SCL2/0-X .......................B47 SCL250-X ......................B47 SCL3/0-X .......................B47 SCL350-X ......................B47 SCL4-L ..........................B47 SCL4/0-X .......................B47 SCL500-6 ......................B47 SCL6-L ..........................B47 SCL600-6 ......................B47 SCL8-L ..........................B47 SCS1-E..........................B46 SCS1/0-X.......................B46 SCS2-Q .........................B46 SCS2/0-X.......................B46 SCS250-X......................B46 SCS3/0-X.......................B46 SCS350-X......................B46 SCS4-L ..........................B46 SCS4/0-X.......................B46 SCS500-6 ......................B46 SCS6-L ..........................B46 SCS8-L ..........................B46
Index
D9
PANDUIT is a global leader in cabling and communication products, delivering end-to-end solutions in support of demanding electrical and networking requirements.
PANDUIT Catalogs
Electrical Solutions
SA-ELCB03
Cable Ties Cable Accessories Stainless Steel Wiring Duct Surface Raceway Abrasion Protection Cable Management Terminals Power and Grounding Connectors Labeling System Labels Pre-Printed & Write-On Markers Lockout/Tagout and Safety Solutions
Network Connectivity
SA-NCCB34
Cable Modules Work Area Outlet Solutions Surface Raceway Zone Cabling Patch Panels, Copper Patch Cords & Punchdowns Fiber Connectors, Enclosures & Patch Cords Fiber Routing Systems Racks & Cable Management Grounding & Bonding Wireless Solutions Managed System Solutions Industrial Labeling & Administration Wiring Duct Cable Ties & Accessories