Siemens 7819 Siemens Sinteso Mp1
Siemens 7819 Siemens Sinteso Mp1
Siemens 7819 Siemens Sinteso Mp1
Sinteso the new compact fire control panels FC2020 and FC2040.
Building Technologies
Sinteso the comprehensive system with FC2020 and FC2040 control panels and FDnet devices.
The Sinteso fire detection system is equipped for every safety requirement. This new generation of fire control panels combines extremely high safety standards with state-ofthe-art technology. Together with the fire terminals and the shared FCnet network, the control panels represent the core elements of Sinteso.
BACnet / Ethernet
Fault transmission
Alarm transmission Fire control panel FC2020 Fire control panel FC2020 Fire terminal FT2040
Threshold detector
Floor repeater display FT2011* ASA wide-spectrum smoke detector FDO241 ASA neural fire detector FDOOT241-9 Threshold detector
FDnet
Radio smoke detector DOW1171 Radio gateway FDCW221* DA wide-spectrum smoke detector FDO221
FDnet
Stub ASA flame detector FDF241-9
VESDA LaserFOCUS*
Extinguishing valve
Alarm transmission
FDnet
Fault transmission
FCnet/ SAFEDLINK
FCnet / Ethernet
FC2020
2 loops for max. 252 devices with power supply: 70 W Battery capacity: max. 12 Ah 1 Ethernet connection RJ45 FC2040 FC2040-AA
2 loops for max. 252 devices with power supply: 70 W Battery capacity: max. 12 Ah 1 Ethernet connection RJ45
2 loops for max. 252 devices with power supply: 150 W Battery capacity: max. 27 Ah 1 Ethernet connection RJ45
2 loops for max. 252 devices with power supply: 150 W Battery capacity: max. 27 Ah 1 Ethernet connection RJ45
4 loops for max. 504 devices with power supply: 150 W Battery capacity: max. 27 Ah 1 Ethernet connection RJ45 FT2040
4 loops for max. 504 devices with power supply: 150 W Battery capacity: max. 27 Ah 1 Ethernet connection RJ45
4 loops for max. 504 devices with power supply: 150 W Battery capacity: max. 27 Ah 1 Ethernet connection RJ45
Fire terminals with Eco housing FT2040-AZ FT2040-EZ Whether small and compact or modular and customizable, Sinteso control panels are the heart of the system. They process all messages generated by the system, and trigger alarm signals and complex control processes. The extremely simple user interface with user prompting lets you check the system status quickly, either locally or by remote access. Since requirements vary depending on the building and application, different control panels are available for different areas of application.
For retrofitting
For retrofitting
Providing fire protection that sets the standards from detectors to control panels
When it comes to reliable detection, rapid signaling and correct reaction, Sinteso sets the standards in all three of these areas. At the field level, for example, Sinteso uses state-of-the-art fire detectors, and ASAtechnology guarantees against false alarms. Fast, fault-tolerant network technology ensures a very high level of security in communication between FDnet devices and the control panel. The control panels allow simple, intuitive operation, plain text displays and unambiguous instructions all of which reduce your stress in the event of an alarm.
system operation. This is very useful, for example, when fire detection zones need to be reconnected after building renovation work.
8 1 4 7 3 10 12 11 5 6 9 13
Backlit text display (LCD display with eight lines of 40 characters) with detailed plain text information on all events occurring (event type, event location, description of measures, operating states, etc.); operator instructions in alarm situations; easy operation using soft keys and navigation key Alarm display, illuminated red if an alarm is received Four programmable LEDs and diverse displays Soft keys for direct operation depending on the state Two operating keys with LEDs, individually programmable Keys for Silence buzzer, Acknowledge message and Reset message Key for scrolling through the alarm messages Navigation and menu key for LCD Keypad for numeric and alphanumeric entries, such as password, customer text, etc. Function keys for alarm organization Display for alerts Optional key-operated switch for operator access Space for installation of an optional event printer for logging
2 3 4 5 6 7 8 9 10 11 12 13
Siemens Switzerland Ltd Building Technologies Group International Headquarters Gubelstrae 22 CH-6301 Zug Tel + 41 41 724 24 24 Fax + 41 41 724 35 22
The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. Subject to change Order no. 0-92020-en Siemens Switzerland Ltd Printed in Switzerland 20609 Ah
www.siemens.com/buildingtechnologies