Equivalencias ResinasAF RESIN BR 0108
Equivalencias ResinasAF RESIN BR 0108
Equivalencias ResinasAF RESIN BR 0108
Water Technologies
BC AB
Vancouver Seattle Brush Prairie Vancouver
C A N A D A
SK
Calgary Spokane
MB
ON
QC NB
Montreal
WA
ME VT NH
MT OR
Boise Red Blu
ND MN
Toronto
NY
ID SD WY
Minneapolis Roseville
San Carlos
NV
NE
Denver
Omaha
UT CO
CA Fresno
Los Angeles
Las Vegas
Colorado Springs
KS
Randolph WI Syracuse MA Avon Grand MI Buffalo South Milwaukee Rapids CT RI Detroit London Windsor Madison PA NJ E. Rutherford Rockford South Cleveland Fallsington Elizabeth IA Bend Broadview Philadelphia Sewickley N. Fort Newark Peoria Wayne Findlay Canton Pittsburgh Baltimore/Wash DC IL IN OH Columbus MD DE Indianapolis Cincinnati WV VA Richmond St. Louis Louisville Kansas City Evansville KY MO Nashville
Schenectady
Albuquerque
NM
OK
TN
Knoxville Greer
NC SC
Durham
AR
Little Rock
Memphis
Atlanta Birmingham
MS LA
AL
GA
North Charleston
El Paso
TX
Austin Houston Conroe
FL
M E X I C O
Ft. Lauderdale
Puerto Rico
At Siemens, we combine expert technical and operations knowledge with the largest network of trained, field service technicians. Our field support includes trained service personnel with experience in maintaining and operating our own systems as well as equipment provided by other companies. Our technicians provide prompt, courteous service to help customers manage their water treatment system with minimum downtime and maximum use of direct labor and operating budgets. These service technicians are ready to assist customers from over 85 offices in North America. Local service branches allow us to schedule service and repairs when you need them, and keep travel expenses to a minimum. In fact, we are positioned to reach over 85% of the North American population in less than a two hour drive.
Regional stocking and distribution centers: Los Angeles, CA Jacksonville, FL Rockford, IL Geismar, LA Conroe, TX Fallsington, PA Ancaster, Ontario, Canada
Some of the advantages to choosing USF brand resin include: Life cycle cost savings when compared with equivalent resin products Manufactured and tested to meet higher, more stringent performance specifications QA/QC program is ANSI N45.2, 10CFR50 (appendix B) and 10CFR21 compliant to meet nuclear safety requirements Process performance guarantees available upon request Extensive technical support and resin application knowledge Annual resin analysis at no charge Custom packaging to meet your volume needs Certificates of Analysis, Certificate of Conformance, and shelf life statements available upon request
USF Brand
Lewatit LANXESS
Diaion Mitsubishi
USF C-271
IRC-76
CNP-80
C-106
USF C-281
IRC-86
C-105
USF C-211
C-249
SK-1B
HCR-S (Dowex MarathonC) HGR-W2 (Dowex Marathon C-10) (Dowex Marathon MSC)
C-100
C-250
SK-110 PK-228
C100X10 C-150
Weak Base Anion USF A-399 USF A-444 IRA-96 IRA-67 (Lewatit MonoPlus MP-64) VP OC 1072 Strong Base Anion USF A-244 IRA-410 (Amberjet 4600) IRA-400 (Amberjet 4200) IRA-402 (Amberjet 4400) IRA-900 IRA-458 (Lewatit MonoPlus MP-500) VP OC 1071 Mixed Bed USF TM-9 USF EDM USF NR-6 USF NR-14 USF NR-30
( ) indicates Uniform Particle Size Equivalent
WA-30
A-100 A-845
ASB-2
SA-20A
SAR (Dowex Marathon A2) SBR-C (Monosphere 550A) SBR-P (Dowex Marathon A) (Dowex Marathon MSA)
A-300
USF A-284
ASB-1
SA-10A
A-600
USF A-464
ASB-1P
SA-12A
A-400
A-641
PA-312
A-500 A-850
NRW-37
IRN-150
SM 94
NM-60 NM-73
MODEL
TYPE
IONIC FORMS
DESCRIPTION
Cation
USF C-211 8% Gel Na and H Standard cation resin used for softening and demineralization. Premium cation resin used in hot condensate polishing, and more resistant to oxidative attack and physical attrition. High cross-linked macroporous strong acid cation resin used in hot condensate polishing, highly resistant to oxidative attack,and suitable at elevated temperatures. Acrylic weak acid gel cation resin used in dealkalizing and softening. Acrylic weak acid macroporous cation resin used in dealkalizing and softening.
USF C-361
10% Gel
Na and H
USF C-381
Macroporous
Na and H
H H
Anion
USF A-244 Gel Type II Cl and OH Type II strong base gel anion with high regeneration efficiency. Type I standard strong base gel anion used in demineralization with good silica removal. Recommended in non-regenerable applications. Type I porous strong base gel anion used in demineralization with good silica removal. Recommended in regenerable applications. Type I macroporous strong base gel anion used in demineralization with good silica removal and better resistance to organic fouling. Recommended in regenerable applications on surface influent waters. Acrylic strong base anion resin used in demineralization and organic traps. Highly resistant to organic fouling. High capacity weak base anion resin used in demineralization and acid removal applications. Excellent regeneration efficiency. Uniform particle size weak base anion resin. High capacity weak base anion resin used in demineralization and acid removal applications. Recommended in applications with high organics. Excellent regeneration efficiency.
USF A-284
Gel Type I
Cl and OH
USF A-464
Cl and OH
USF A-674
Type I Macroporous
Cl and OH
USF A-714
Acrylic Gel
Cl
USF A-444
Free Base
Mixed Bed
USF TM-8 Mixed Bed H/OH 1:1 chemical equivalent mix of C-211 (H) and A-244 (OH). High capacity general purpose mixed bed used in demineralizeration. 1:1 chemical equivalent mix of C-211 (H) and A-464 (OH). General purpose mixed bed used in demineralization when silica reduction is important. 1:1 chemical equivalent mix of C-211 (H) and A-284 (OH). High capacity general purpose mixed bed used in demineralization when silica reduction is important. 1:1 chemical equivalent mix of C-361 (H) and A-464 (OH). General purpose mixed bed used in demineralization when silica reduction is important. Good separation characteristics for regenerable applications. 1:1 chemical equivalent mix of C-211 (H) and A-284 (OH). Recommended for EDM and other metal removal applications.
USF TM-9
Mixed Bed
H/OH
USF NR-6
Mixed Bed
H/OH
USF NR-30
Mixed Bed
H/OH
USF EDM
Mixed Bed
H/OH
MODEL
TYPE
IONIC FORMS
DESCRIPTION
Cation
USF C-211 SG (H) 8% Gel H Specially processed cation resin for demineralization applications in which low TOC leachables are desired. Specially processed cation resin for mixed bed demineralization applications in which low TOC leachables are desired. Specially processed cation resin for mixed bed demineralization applications in which low TOC leachables and extremely low cross contamination are desired. Upgraded USF C-361 MEG (H) with extremely low sodium content recommended for microelectronics applications. Specially processed cation resin for mixed bed demineralization applications in which low TOC leachables are desired. Uniform Particle Size version of USF C-361 SG (H). Uniform Particle Size version of USF C-361 MEG (H).
10% Gel
10% Gel
USF C-361 MEG PPQ (H) USF C-381 SG (H) USF C-373 SG (H) USF C-373 MEG (H)
H H H H
Anion
USF A-284 SG (OH) Gel Type I OH Specially processed anion resin for demineralization applications in which low TOC leachables are desired. Specially processed anion resin for regenerable demineralization applications in which low TOC leachables are desired. Specially processed anion resin for mixed bed demineralization applications in which low TOC leachables and extremely low cross contamination are desired. Upgraded USF A-464 MEG (OH) with extremely low sodium content recommended for microelectronics applications. Uniform Particle Size version of USF A-464 SG (OH).
OH
OH
OH
OH
Mixed Bed
USF NR-6 SG (H/OH) Mixed Bed H/OH 1:1 chemical equivalent mix of C-211 SG (H) and A-284 SG (OH). High capacity mixed bed ideal in non regenerable applications requiring low TOC leachables. 1:1 chemical equivalent mix of C-361 SG (H) and A-464 SG (OH). Ideal for regenerable applications requiring low TOC leachables. 1:1 chemical equivalent mix of C-361 MEG (H) and A-464 MEG (OH). Ideal for regenerable applications requiring low TOC leachables and extremely low cross contamination. Upgraded USF NR-30 MEG (H/OH) with extremely low sodium content recommended for microelectronics applications.
Mixed Bed
H/OH
Mixed Bed
H/OH
Mixed Bed
H/OH
Cation
USF C-211 XRR 8% Gel Na and H Cross regenerated with FDA compliant process for use in food, pharmaceutical and dialysis applications. Cross regenerated with FDA compliant process for use in food, pharmaceutical and dialysis applications.
10% Gel
Na and H
Anion
USF A-244 XRR Gel Type II Cl and OH Cross regenerated with FDA compliant process for use in food, pharmaceutical and dialysis applications. Cross regenerated with FDA compliant process for use in food, pharmaceutical and dialysis applications with low silica requirements. Cross regenerated with FDA compliant process for use in food, pharmaceutical and dialysis applications with low silica and TOC requirements.
Cl and OH
OH
Mixed Bed
USF TM-8 XRR (H/OH) Mixed Bed H/OH Cross regenerated with FDA compliant process for use in food and pharmaceutical applications. Cross regenerated with FDA compliant process for use in food, pharmaceutical and dialysis applications. Cross regenerated with FDA compliant process for use in food, pharmaceutical and dialysis applications with low silica and TOC requirements.
Mixed Bed
H/OH
Mixed Bed
H/OH
Cation
USF NR-1 (H) USF C-361C (H) USF C-361 MEG (H) USF C-381C (H) 8% Gel 10% Gel 10% Gel Macroporous H H H H Low metals and low leachables cation resin for use in primary, secondary and rad waste applications. Low metals and low leachables cation resin for use in condensate polishing and high flow applications. Low metals and low leachables cation resin processed for superior separation in critical mixed bed applications. Low metals and low leachables macroporous cation resin for use in high flow and high temperature applications. Low metals and low leachables uniform particle size cation resin processed for superior separation in regenerable mixed bed applications. Uniform particle size cation resin super cleaned per our patented processing procedure for use in applications requiring the critically low TOC extractables such as condensate polishing applications using alternate amine chemistry. Low metals and low leachables high cross linked cation resin for use in condensate polishing applications with extremely low sodium requirements. Indicator dyed cation resin used in conductivity measurements
14% Gel
Anion
USF NR-2 LC (OH) Gel Type I OH Low chloride, low leachable anion resin for primary, secondary and rad waste applications. Low leachable anion resin processed for high kinetics and superior separation in mixed bed applications. Less separable anion resin with low leachables for use in BWR condensate polishing and anion underlayment applications. Specially processed anion resin for condensate polishing applications with extremely low sodium requirements. Low chloride, low leachable anion resin for use in primary, secondary and rad waste applications. Low leachable anion resin processed for superior separation. Uniform particle size anion resin processed for low leachables and superior separation. Macroporous anion resin processed for low leachables and superior separation.
Gel Type I
OH
USF A-284 LS (OH) USF A-284 RLS (OH) USF A-464 LC (OH) USF A-464 MEG (OH) USF A-254 PSSG (OH) USF A-674 PSMBSG (OH)
Gel Type I Gel Type I Gel Type I Porous Gel Type I Porous UPS Gel Type I Porous Macroporous
OH OH OH OH OH OH
Mixed Bed
USF NR-6 LC (H/OH) USF NR-31 LC (H/OH) Mixed Bed Mixed Bed H/OH H/OH Low chloride, low leachable mixed bed for use in primary and rad waste applications. Low chloride, low leachable mixed bed for use in primary, secondary, condensate polishing and rad waste applications. Uniform particle size high cross linked gel cation and uniform particle size gel anion mixed bed processed for low leachables and superior separation in condensate polishing applications. High cross linked gel cation and gel anion mixed bed designed for steam generator blow down demineralization applications with extremely low sodium requirements. High capacity mixed bed designed for stator cooling applications. Macroporous cation, gel anion mixed bed with low leachables and low chlorides designed for blow down demineralization applications and suppression pool for cobalt and cesium control. Lithium7 hydroxide form mixed bed with low leachables and low chlorides for use in primary systems.
Mixed Bed
H/OH
Mixed Bed
H/OH
Mixed Bed
H/OH
Mixed Bed
H/OH
Mixed Bed
Li7/OH
10
Resin Processing Facilities Columbus, OH Conroe, TX Fallsington, PA Jacksonville, FL Los Angeles, CA Richmond, VA Rockford, IL South Windsor, CT
Processing/Blending Siemens provides resin processing services to meet customers high purity needs. Our specially designed facility uses microelectronics grade water (typically <3 ppb TOC, 18+ Megohm and <50 ppt Na) to ensure the integrity of the processes. Special customer requirements may include: Extremely low organic leachable impurities (TOC, UV Cl, UV SO4 , etc.) Conversion to specific ionic forms (Li-7, K,Ca, various amines, etc.) Terminal Settling Velocity Modified (for improved separability) Custom mixing and blending of resins Custom packaging of resins (Mylar, Heat sealed, 0.5-7 CF drums, 20-35 CF supersacks) FDA cycling for food and pharmaceutical applications (taste and odor free) Resin Cleaning and Reconditioning Resin cleaning and reconditioning services provide an option for salvaging fouled, cross-contaminated and/or exhausted resin. Siemens can remove resins, transport them to our local processing plant, convert the resins and return them to your facility. Resin cleaning extends the resin's useful life, minimizes
operating costs and reduces system downtime. The resin can be transported to and from the job site via tanker truck, 55 gallon drum, lined fiber drum, or supersack. Bulk Transportation Siemens offers bulk delivery of new resin and disposal of spent resins. We eliminate drum handling by slurrying the resin directly from your water treatment service vessels to one of our company-owned tanker trucks. Bulk transportation greatly reduces the labor and steps involved with the documentation and administrative controls associated with temporary on-site and off-site disposal of resin. Performance Evaluation Program An important part of the Siemens service offering is to assist customers achieve maximum performance from their ion exchange system. Our proprietary, Performance Evaluation Program is a computer-based tool which evaluates current operating conditions and economic factors versus theoretical data. This allows us to evaluate the current resins, system operating parameters and replacement times, and make appropriate recommendations.
11
ANSI is a trademark of the American National Standards Institute. Dowex, Dowex Marathon and Monosphere are trademarks of Dow Chemical Company. Mylar is a trademark of DuPont Teijin Films U.S. Lewatit and Lewatit MonoPlus are trademarks of Lanxess Deutschl and GmbH. Diaion is a trademark of Mitsubishi Chemical Corporation. Purolite is a trademark of The Purolite Company. Amberjet and Amberlite are trademarks of Rohm & Haas. Ionac is a trademark of Sybron Chemicals, Inc. USF is a trademark of Siemens, its subsidiaries or affiliates. The information provided in this brochure contains merely general descriptions or characteristics of performance which in actual case of use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Customer service: 800.466.7873 Technical support: 800.875.7873 ext. 5000 2008 Siemens Water Technologies Corp. AF-RESINdr-BR-0108 Subject to change without prior notice.
www.siemens.com/water