B Line PDF
B Line PDF
B Line PDF
SS-12
INTRODUCTION
Cooper B-Line, Inc. is a leading manufacturer and fabricator of steel
and aluminum products which are used in support of equipment for
industrial, commercial, utility, and OEM installations. Cooper B-Line
is proud of the exacting standards of research, design, engineering,
and manufacturing that go into each and every product that
comprise our metal framing product line. Our customers have
access to the most complete support systems offered in the
industry, including metal framing, cable tray, pipe hangers, slotted
angle, and fasteners.
Many of Cooper B-Lines products are listed by the Underwriters
Laboratories, Inc. All Cooper B-Line products are manufactured to
meet or exceed MFMA and other industry standards set for their
design and manufacture.
The majority of Cooper B-Line products are produced in four
modern plants consisting of approximately 900,000 square feet.
These facilities are located in Highland, Illinois; Troy, Illinois; Reno,
Nevada; and Sherman, Texas. Regional sales and distribution
centers are located throughout the United States stocking standard
Cooper B-Line products for quick service and delivery.
This catalog is designed to be helpful to engineers and contractors
in the application and selection of strut products for construction
and maintenance.
If a unique application requires a special product not included in this
catalog. Cooper B-Line engineering personnel are ready to furnish
design consultation and realistic cost estimates. In addition, sales
representatives with engineering know-how are located throughout
the United States and abroad for your convenience.
B-VOCAL
SSSMMM
Table of Contents
Introduction
...........................
2-3
Technical Data
Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Design of Strut Systems . . . . . . . . . . 10-12
Recommended Specification . . . . . . . . . 13
Channel & Combinations
Info. & Specifications . . . . . . . . . . . . . . . . 14
Selection Chart . . . . . . . . . . . . . . . . . . . . . . 15
B11 Channel . . . . . . . . . . . . . . . . . . . . . 16-17
B12 Channel . . . . . . . . . . . . . . . . . . . . . 18-19
B22 Channel . . . . . . . . . . . . . . . . . . . . . 20-23
B24 Channel . . . . . . . . . . . . . . . . . . . . . 24-25
B26 Channel . . . . . . . . . . . . . . . . . . . . . 26-27
B32 Channel . . . . . . . . . . . . . . . . . . . . . 28-29
B42 Channel . . . . . . . . . . . . . . . . . . . . . 30-31
B52 Channel . . . . . . . . . . . . . . . . . . . . . 32-33
B54 Channel . . . . . . . . . . . . . . . . . . . . . 34-35
B56 Channel . . . . . . . . . . . . . . . . . . . . . 36-37
Telescoping Channel . . . . . . . . . . . . . 38-39
Channel Hole Patterns . . . . . . . . . . . 40-42
Electrical Accessories
Info. & Specifications . . . . . . . . . . . . . . . 162
Selection Chart . . . . . . . . . . . . . . . . . . . . . 163
Fluorescent Fixture Hangers . . . 164-166
Electrical Accessories . . . . . . . . . . 167-168
Junction Boxes . . . . . . . . . . . . . . . . . . . . . 169
Strut Joiners . . . . . . . . . . . . . . . . . . . 170-171
Electrical Hardware . . . . . . . . . . . . . . . . . 172
Porcelain Clamps . . . . . . . . . . . . . . 173-174
Maple Clamps . . . . . . . . . . . . . . . . . 174-175
Aluminum & Stainless Steel Materials
Info. & Specifications . . . . . . . . . . . . . . . 176
Aluminum . . . . . . . . . . . . . . . . . . . . . . 177-179
Stainless Steel . . . . . . . . . . . . . . . . . 180-181
Fiberglass Materials
Info. & Specifications . . . . . . . . . . .
Channels . . . . . . . . . . . . . . . . . . . . . .
Hardware . . . . . . . . . . . . . . . . . . . . . .
Fittings . . . . . . . . . . . . . . . . . . . . . . . .
Strut Fittings
Info. & Specifications . . . . . . . . . . . . . . . . 72
Flat Plate Fittings . . . . . . . . . . . . . . . . . 73-75
90 Angle Fittings . . . . . . . . . . . . . . . . . 76-81
Angular Fittings . . . . . . . . . . . . . . . . . . . 82-84
Braces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Clevis Fittings . . . . . . . . . . . . . . . . . . . . . . . 86
U-Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 87-90
Z-Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 91-93
Wing Fittings . . . . . . . . . . . . . . . . . . . . . 94-96
Post Bases . . . . . . . . . . . . . . . . . . . . . . . 97-98
Brackets . . . . . . . . . . . . . . . . . . . . . . . . 99-105
Miscellaneous Fittings . . . . . . . . . . 106-111
182-183
184-188
188-190
191-199
Reference Data
..................
...
238-240
.............................
241-248
For additional information on Tolco brand part numbers beginning with Fig.,
visit www.tolco.com or www.cooperbline.com
1
228-237
Introduction
Introduction
Cooper B-Lines metal framing support system is designed with many time-saving features. They are
fully adjustable and reusable, with a complete line of channels, fittings and accessories for multipurpose applications.
No Welding
No Drilling
Use Your Imagination
Cooper B-Lines metal framing installs quickly. There is
no need for special tools. All you need is a wrench
and hacksaw. Channels and parts can be taken
apart for reuse as quickly as they were assembled,
yet they provide the strength of welded construction.
Eliminating welding and drilling produces substantial
savings in time and labor.
Introduction
Introduction
Technical Data
Technical Data
MATERIALS
Carbon Steel
Aluminum
Stainless Steel
Fiberglass
Cooper B-Line offers two fire retardant
(FR) resins for strut systems, polyester
and vinyl ester. Both resins are ideal for
corrosive environments or nonconductive
applications with moderate strength
requirements. Some common types of
environments where Vinyl Ester Resins
are recommended, that Poly Esters are
not, are paper mills, most any metal
plating operation and any condition with
1A
ine
B2
0
74
SS
-L
Technical Data
FINISHES
Chromium/ Zinc
Zinc Coatings
Zinc protects steel in two ways. First it
protects the steel as a coating and
second as a sacrificial anode to repair
bare areas such as cut edges, scratches,
and gouges. The corrosion protection of
zinc is directly related to its thickness and
the environment. This means a .2 mil
coating will last twice as long as a .1 mil
coating in the same environment.
Galvanizing also protects cut and drilled edges.
Chromium/Zinc composition is an
aqueous coating dispersion containing
chromium, proprietary organics, and zinc
flake.
This finish provides 500 hours protection
in salt spray testing per ASTM B117.
Pre-Galvanized Zinc
30
Life
in
Years
Pre-Galvanized
25
21
20
10
10
11
8
7
Rural
18
Tropical
Marine
Temperature
Marine
Suburban
Environment
Urban
3
Highly
Industrial
Technical Data
Zn
ZnFe
Fe
Technical Data
Technical Data
Dura-Green and Dura-Copper
Epoxy Coatings
PVC Coating
Unscribed
Scribed 1/8 (3.2) Creepage
hole or discontinuity occurs, the corrosive
Type of Finish
5% Failure (1)
from Scribe (1)
action can undercut the base metal to a
point where all that remains is the PVC.
B-Line Dura-Green Epoxy
1000 Hours
312 Hours
The Dura-Green and Dura-Copper Epoxy
coatings have been tested and listed by
Underwriters Laboratories in accordance
with Standard for Surface Metal Raceway
and Fittings, UL5 and Standard for Pipe
192 Hours
288 Hours
Perma-Green
438 Hours
231 Hours
Zinc Chromate
Industry Green (Range)
36 Hours
96 Hours
10 to 36 Hours
4 to 30 Hours
(1) All salt spray (fog) tests conducted in accordance with ASTM B117 and evaluated and
rated according to ASTM D1654 Tables 1 & 2. Tests are performed and certified by an
independent testing laboratory.
TANK 2
A rinse is
applied to
remove
insoluble salts
and unreacted
phosphates.
TANK 3
A phosphatized
sealer is applied
to insure
corrosion
resistanceand
paint adhesion.
TANK 4
The material
moves through
clear water rinse
to remove excess
phosphates.
TANK 5
A pre-deionized
rinse prepares
the metal for the
cathodic electrocoating.
TANK 6
The electrocoating tank
applies a
uniform coat
of epoxy paint
to the entire
surface.
TANK 7
The first post
rinse removes
any unelectrically attracted
solids.
TANK 8
The final rinse
insures a
smooth,
nonblemish
surface.
BAKE OVEN
The curing
process takes 20
minutes at a
baking temperature
of 375 F (199 C).
Technical Data
WELDING
sequence, speed and duration are
carefully controlled and monitored by a
sophisticated electronic control system.
A statistical quality control program,
combining destructive and non-destructive
testing, is used by Cooper B-Line to
ensure high quality welds.
Spot Welding
MIG Welding
Spot Weld
MIG Weld
Quality Assurance
Cooper B-Lines Quality Assurance
Program has been developed and
implemented for compliance with
ISO9001:2008. Cooper B-Line also
complies with various industry standards
and specifications. Cooper B-Line has
extensive experience in suppling metal
framing components for the nuclear
power generating industry, and upon
request can provide products in
compliance with 10CFR50 Appendix B,
NQA-1 and 10CFR21. For more
information on our quality capability
please visit www.cooperbline.com/nuclear.
Technical Data
Technical Data
CORROSION
Anodic End
Chemical Corrosion
Chemical corrosion takes place when
metal comes in direct contact with a
corrosive solution. Some factors which
affect the severity of chemical corrosion
include: chemical concentration level,
duration of contact, frequency of washing,
and operating temperature.
Storage Corrosion
Wet storage stain (white rust) is caused
by the entrapment of moisture between
surfaces of closely packed and poorly
ventilated material for an extended period.
Wet storage stain is usually superficial,
having no affect on the properties of the
metal.
More Anodic
Technical Data
Atmospheric Corrosion
Magnesium
Magnesium Alloys
Zinc
Beryllium
Aluminum - Zinc Alloys (7000 series)
Aluminum - Magnesium Alloys (5000 series)
Aluminum (1000 series)
Aluminum - Magnesium Alloys (3000 series)
Aluminum - Magnesium - Silicon Alloys (6000 series)
Cadmium
Aluminum - Copper Alloys (2000 series)
Cast Iron, Wrought Iron, Mild Steel
Austenitic Nickel Cast Iron
Type 410 Stainless Steel (active)
Type 316 Stainless Steel (active)
Type 304 Stainless Steel (active)
Naval Brass, Yellow Brass, Red Brass
Tin
Copper
Lead-Tin Solders
Admiralty Brass, Aluminum Brass
Manganese Bronze
Silicon Bronze
Tin Bronze
Type 410 Stainless Steel (passive)
Nickel - Silver
Copper Nickel Alloys
Lead
Nickel - Aluminum Bronze
Silver Solder
Nickel 200
Silver
Type 316 Stainless Steel (passive)
Type 304 Stainless Steel (passive)
Incoloy 825
Hastelloy B
Titanium
Hastelloy C
Platinum
Graphite
Galvanic Corrosion
Galvanic corrosion occurs when two or
more dissimilar metals are in contact in
the presence of an electrolyte (ie.
moisture). An electrolytic cell is created
and the metals form an anode or a
cathode depending on their relative
position on the Galvanic Series Table.
The anodic material will be the one to
corrode. Anodic or cathodic characteristics
of two dissimilar metals will depend on the
type of each material. For example: If
zinc and steel are in contact, the zinc acts
as the anode and will corrode; the steel
acts as the cathode, and will be protected.
If steel and copper are in contact, the
Technical Data
Aluminum
R
R
R
R
F
R
R
NR
R
R
F
R
R
R
R
F
R
R
R
F
NR
NR
NR
R
R
R
R
F
R
R
R
R
R
R
R
R
F
R
R
F
NR
NR
NR
F
NR
NR
NR
F
F
F
R
F
R
F
R
R
Dura-Green
NR
F
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
NR
F
F
NR
R
R
R
R
R
F
R
R
R
R
R
R
NR
R
R
R
NR
R
R
R
R
R
R
R
R
R
NR
R
R
R
F
R
R
PVC
R
R
NR
R
R
R
NR
R
R
NR
F
R
NR
R
NR
NR
R
R
R
R
R
R
R
R
R
R
NR
NR
R
R
R
NR
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
NR
Type 304
Stainless
R
R
R
R
R
R
R
NR
R
R
R
NR
R
R
R
R
NR
NR
NR
R
R
F
R
NR
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
NR
NR
R
R
R
F
Type 316
Stainless
R
R
R
R
R
R
R
NR
R
R
R
F
R
R
R
R
NR
NR
NR
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
F
Zinc
Coated Steel
NR
NR
R
NR
R
R
R
R
R
R
NR
NR
NR
NR
R
R
R
R
R
NR
R
R
NR
F
NR
F
NR
F
F
R
Technical Data
Chemical
Acetic Acid 10%
Acetic Acid 2%
Acetone
Ammonium Hydroxide-Conc.
Ammonium Hydroxide 10%
Ammonium Hydroxide 2%
Benzene
Bromine Water
Butanol (Butyl Alcohol)
Carbon Disulfide
Carbon Tetrachloride
Chlorine Water
Cutting Oil
Diethanolamine
Ethanol
Ethyl Acetate
Ethylene Dichloride
Formaldehyde 20%
Gasoline
Glycerine
Household Detergent 10%
Hydrochloric Acid 40%
Hydrochloric Acid 10%
Hydrochloric Acid 2%
Hydrogen Peroxide 30%
Hydrogen Peroxide 3%
Hydrogen Sulfide (Gas)
JP-4 Jet Fuel
Lactic Acid 85%
Latex
Linseed Oil Fatty Acid
Methanol
Methyl Ethyl Ketone
Methyl Isobutyl Ketone
Mineral Spirits
Motor Oil-10W
Naphtha, VM&P
Nitric Acid 2%
Perchloroethylene
Petroleum Ether
Phenol 10%
Phosphoric Acid 2%
Potassium Hydroxide 50%
Potassium Hydroxide 10%
Potassium Hydroxide 2%
Sodium Chloride 25%
Sodium Hydroxide 50%
Sodium Hydroxide 10%
Sodium Hydroxide 2%
Sodium Hypochlorite-C1. 10%
Sodium Hypochlorite-C1. 6%
Sulfuric Acid 2%
Tall Oil Fatty Acid (Syfate 94)
Tannic Acid 50%
Water-Deionized
Water-Sea
Water-Tap
Xyol
Technical Data
DESIGN OF
STRUT SYSTEMS
Beams
Beams are usually defined as horizontal
members which are subjected to vertical
loads such as shelves, platforms or
supports for pipes, conduits or cable
trays. The following is a brief overview of
common beam configurations:
Cantilever Beam
Deflection
Technical Data
Simple Beam
An example of a simple beam is a length
of channel placed across two cylinders.
When a load is applied, the channel will
support the load because of its stiffness.
The cylinders serve to support the
channel, but do not interfere with its
natural tendency to flex or bend. Simple
beam analysis is used almost universally
for beam comparisons, even though it is
seldom practical in field installations.
A cable tray or conduit trapeze hanger
closely resembles a simple beam.
Point Load
Point Load
Continuous Beam
This beam configuration is commonly
used in lighting installations. The
continuous beam possesses traits of
both the simple and fixed beams. When
equal loads are applied to all spans
simultaneously, the counter-balancing
effect of the loads on both sides of a
support restricts the movement of the
channel at the support, similar to that of
the fixed beam. The end spans behave
substantially like simple beams.
Fixed Beam
This type of fixed support restricts the
movement of the ends of the channel
when a load is applied. Because of this,
the stiffness of the channel at the ends
and center is employed to resist the load.
The result is a load capability which is
greater than that of an identical simple
beam.
The fixed beam can be approximated by
bolting or welding a length of channel to
rigid supports.
10
Technical Data
Safety Factor
The design loads given for strut beam
loads are based on a simple beam
condition using allowable stress of 25,000
psi. This allowable stress results in a
safety factor of 1.68. This is based upon a
virgin steel minimum yield strength of
33,000 psi cold worked during rolling to
an average yield stress of 42,000 psi.
Columns
11
GENERAL INFORMATION
Torque
The torque values given throughout the
catalog are to be used as a guide only.
The relationship between the applied
torque or torque wrench reading and the
actual tension created in the bolt may be
substantially different. For example, a dry
non-lubricated bolt with a heavy plating
may rate 50% as efficient as a bolt which
is lubricated with a mixture of heavy oil
and graphite. Other important factors
affecting torque-tension relationships
include friction under the bolt head or nut,
hole tolerances, and torque wrench
tolerances. Accuracy of many commercial
torque wrenches may vary as much as
plus or minus 25%.
Technical Data
Technical Data
The data shown in the beam load charts for appropriate channels on page(s) 16 thru 37 is for simply supported, single span beams
with a uniformly distributed load. For other loading and/or support conditions, use the appropriate factor from the chart below.
Load
Factor
Deflection
Factor
1.00
1.00
.50
.80
1.00
1.10
1.50
.30
1.00
.40
.25
2.40
.12
3.20
1.30
.92
1.00
.42
Continuous Beam - Two Equal Spans - Concentrated Load at Center of One Span
.62
.71
Continuous Beam - Two Equal Spans - Concentrated Load at Center of Both Spans
.67
.48
Span
Technical Data
Span
EXAMPLES:
PROBLEM:
Calculate the maximum allowable load and corresponding
deflection of a simply supported B22 beam with a concentrated
load at midspan as shown.
PROBLEM:
Calculate the maximum allowable load and corresponding
deflection of a cantilever B52 beam with a uniformly distributed
load.
96
SOLUTION:
From beam load chart for B22 (page 22), maximum allowable
Load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in the chart above.
SOLUTION:
From beam load chart for B52 (page 33), maximum allowable
load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in chart above.
12
Technical Data
RECOMMENDED BOLTED METAL FRAMING SPECIFICATION
Brackets [ ] indicate alternative
specifications which may be substituted by
the project engineer.
PART 1 - GENERAL
1.01 WORK INCLUDED
A. Continuous slot, bolted framing channels
and all associated fittings and hardware.
B. Trapeze type supports for cable tray,
conduit, pipe and other similar systems.
C. Use of bolted metal framing as a surface
metal raceway.
PART 2 - PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Manufacturer: Subject to compliance
F. ASTM A1018 - Standard Specification
for Steel, Sheet and Strip, Heavy-Thickness with these specifications, strut systems to
be installed shall be as manufactured by
Coils, Carbon, Hot-Rolled, Structural
Cooper B-Line Systems, Inc. [or engineer
Quality.
approved equal.]
G. MFMA - Metal Framing Standards
Publication, MFMA-4.
2.02 STRUT CHANNELS AND
COMPONENTS
1.03 QUALITY ASSURANCE
A. General: Strut shall be 15/8 wide in
A. Manufacturers : Firms regularly engaged
varying heights and welded combinations
in the manufacture of bolted metal framing
as required to meet load capacities and
of the types required, whose products have designs indicated on the drawings.
been in satisfactory use in similar service
for not less than 5 years.
B. Material and Finish: Material and finish
specifications for each strut type are as
B. A material heat code number shall be
follows:
stamped on all strut and fittings. This is
required to maintain traceability of the
product to the material test reports to the
ASTM standard.
C. For stainless steel items, the part
number shall contain a material designator
(EXAMPLE: B-Line B22SS6 for type 316 or
B22SS4 for type 304), or a separate stamp
shall be included to reference the type of
material used.
D. MFMA Compliance: comply with the
latest revision of MFMA Standard
Publication Number MFMA-4, Metal
Framing.
13
Torque (ft-lbs)
6
11
19
50
Technical Data
1.02 REFERENCES
A. ASTM A108 - Specification for Steel
Bars, Carbon, Cold Finished, Structural
Quality.
Slots
Cooper B-Lines slotted series of channels offer full
flexibility. A variety of pre-punched slot patterns
eliminate the need for precise field measuring for
hole locations. Slots offer wide adjustments in the
alignment and bolt sizing.
Holes
Knockouts
When used with series B217-20 Closure Strips,
Cooper B-Lines knockout channels can be used to
provide an economical U.L. listed surface raceway.
Channels are furnished with 7/8 (22.2 mm) knockouts
on 6 (152 mm) centers, allowing for perfect fixture
alignment on spans up to 20 (6.09 m).
Finish
Plain
GRN
GLV
Dura-Green
Pre-Galvanized
HDG
YZN
SS4
SS6
AL
Hot-Dipped Galvanized
Yellow Zinc Chromate
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum
Specification
ASTM A1011, 33,000 PSI
min. yield
ASTM A653 33,000 PSI
min. yield
ASTM A123
ASTM B633 SC3 Type II
ASTM A240
ASTM A240
Aluminum 6063-T6
Welding
Weld spacing is maintained between 21/2 inches (63.5 mm) and 4 inches (101.6 mm) on center. Through high
quality control testing of welded channels and continuous monitoring of welding equipment, Cooper B-Line
provides the most consistent combination channels available today.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
14
Channel
SELECTION CHART
for Channels, Materials and Hole Patterns
Channel Hole Pattern **
Height
Stainless
Steel
Width
Steel Alum.
1
31/4
27/16
15/8
15/8
15/8
13/8
1
13/16
13/16
13/16
13/16
13/32
(82.5)
(61.9)
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)
(20.6)
(10.3)
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
13/16
13/16
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(20.6)
(20.6)
12
12
12
14
16
12
12
12
14
16
18
18
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Type
316
2
.105
.105
.105
.080
.080
H17/8
TH
13/32 x 3
9/16
9/16
7/8
slots on
2 centers
slots
diameter
holes
diameter
on 17/8
centers
diameter
knockouts
1
1
1
12
123
123
1
13
13
1
1234
1
1
12
12
12
1
1
1
1
12
1
12
12 Ga. 12 Ga. 1 2 3 4
14 Ga. 14 Ga. 1 2 3 4
1
12 Ga.
13
12 Ga.
13
12 Ga.
1
14 Ga. 14 Ga. 1 2 3 4
1 3
1
1
1
1
1
1
1
KO6
The selection has been prepared to provide a reference for available channel, materials and hole patterns. Material types
available for various hole patterns are defined by numbers 1 thru 4.
Some stainless steel channels with hole patterns are available on special order only.
*Metric equivalent for thicknesses shown in chart.
12 Ga. = 2.6 mm
18 Ga. = 1.2 mm
14 Ga. = 1.9 mm
.105 = 2.6 mm
16 Ga. = 1.5 mm
.080 = 2.0 mm
**1 - Steel
2 - Aluminum
3 - Type 304 Stainless Steel
4 - Type 316 Stainless Steel
Hole Patterns
Length
Material/Finish
SH (pg. 40)
GRN
120
S (pg. 40)
240
GLV
H178 (pg. 40)
HDG
TH (pg. 41)
YZN
K06 (pg. 41)
SS4
SHA (pg. 41)
SS6
S58 (pg. 42)
AL
M (pg. 42)
H25 (pg. 43)
H112 (pg. 42)
* Leave blank for no hole pattern
15
B11
B12
B22
B24
B26
B32
B42
B52
B54
B56
B62
B72
Type
304
SH
9/16 x 11/8
15/8
(41.3)
3/8
(9.5)
3/8
(9.5)
7/8
(22.2)
9/32
(7.1)
Y
31/4
(82.5)
X
1.5190
(38.6)
13/16
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
B11
B11A
Weight
lbs./ft.
kg/m
3.059
6.119
(4.55)
Areas of
Section
sq. in. cm2
Moment of
Inertia (I)
in.4
cm4
Section
Modulus (S)
in.3
Y - Y Axis
Radius of
Gyration (r)
cm3
in.
cm
(2.83)
(4.79)
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm4
in.3
cm3
Radius of
Gyration (r)
in.
cm
(1.77)
(1.77)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
BEAM LOADING
Beam Span
In.
mm
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
144
(3657)
168
(4267)
192
(4877)
216
(5486)
240
(6096)
Channel
Style
Lbs.
In.
mm
Lbs.
Lbs.
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
5130
5130*
3488
5130*
2616
5130*
2093
5130*
1744
5130*
1495
4552
1308
3983
1163
3541
1046
3187
872
2656
747
2276
654
1992
581
1770
523
1593
(22819)
(22819)
(15515)
(22819)
(11636)
(22819)
(9310)
(22819)
(7757)
(22819)
(6650)
(20248)
(5818)
(17717)
(5173)
(15751)
(4653)
(14176)
(3879)
(11814)
(3323)
(10124)
(2909)
(8861)
(2584)
(7873)
(2326)
(7086)
.029
.005
.065
.017
.117
.040
.183
.079
.263
.136
.358
.191
.468
.250
.592
.317
.731
.391
1.053
.563
1.433
.766
1.871
1.001
2.368
1.267
2.924
1.564
(.73)
(.13)
(1.65)
(.43)
(2.97)
(1.01)
(4.65)
(2.00)
(6.68)
(3.45)
(9.09)
(4.85)
(11.89)
(6.35)
(15.03)
(8.05)
(18.57)
(9.93)
(26.74)
(14.30)
(36.40)
(19.45)
(47.52)
(25.42)
(60.15)
(32.18)
(74.27)
(39.72)
5130
5130*
3488
5130*
2616
5130*
2093
5130*
1744
5130*
1460
4552
1118
3983
884
3541
716
3187
497
2656
365
2078
280
1591
221
1257
179
1018
(22819)
(22819)
(15515)
(22819)
(11636)
(22819)
(9310)
(22819)
(7757)
(22819)
(6494)
(20248)
(4973)
(17717)
(3932)
(15751)
(3185)
(14176)
(2211)
(11814)
(1623)
(9243)
(1245)
(7077)
(983)
(5591)
(796)
(4528)
5130
5130*
3488
5130*
2616
5130*
1908
5130*
1325
5130*
974
4552
745
3983
589
3353
477
2716
331
1886
243
1386
186
1061
147
838
119
679
(22819)
(22819)
(15515)
(22819)
(11636)
(22819)
(8487)
(22819)
(5894)
(22819)
(4332)
(20248)
(3314)
(17717)
(2620)
(14915)
(2122)
(12081)
(1472)
(8389)
(1081)
(6165)
(827)
(4719)
(654)
(3727)
(529)
(3020)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
16
Y
31/4
(82.5)
61/2
(165.1)
X
X
X
15/8
(41.3)
X
Y
13/16
(20.6)
31/4
(82.5)
1.5190
(38.6)
B11B
COLUMN LOADING
Unbraced
Height
In.
Channel
Style
mm
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
144
(3657)
168
(4267)
192
(4877)
216
(5486)
240
(6096)
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
B11
B11A
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
8190
17701
7311
17416
6214
17016
4988
16503
3816
15876
3063
15135
2564
14279
2213
13310
1953
12226
1591
9717
1347
7183
1167**
5499**
1026**
4345**
910**
3520**
(36431)
(78738)
(32521)
(77470)
(27641)
(75691)
(22188)
(73409)
(16974)
(70620)
(13625)
(67324)
(11405)
(63516)
(9844)
(59206)
(8687)
(54384)
(7077)
(43223)
(5992)
(31951)
(5191)
(24461)
(4564)
(19327)
(4048)
(15658)
4477
8267
4183
8189
3783
8079
3279
7727
2444
6160
1897
4961
1532
4045
1273
3337
1081
2784
816
1990
642
1464
519
1121
429
885
360
717
(19914)
(36773)
(18607)
(36426)
(16827)
(35937)
(14586)
(34371)
(10871)
(27401)
(8438)
(22067)
(6814)
(7993)
(5662)
(14844)
(4808)
(12384)
(3630)
(8852)
(2856)
(6512)
(2308)
(4986)
(1908)
(3936)
(1601)
(3189)
8446
17778
7838
17590
7053
17327
6140
16988
5146
16574
4133
16084
3398
15520
2886
14880
2514
14164
2011
12508
1687
10550
1459
8330
1285**
6582**
1148**
5331**
(37569)
(79080)
(34865)
(78244)
(31373)
(77074)
(27312)
(75566)
(22890)
(73724)
(18384)
(71545)
(15115)
(69036)
(12837)
(66189)
(11183)
(63004)
(8945)
(55638)
(7504)
(46929)
(6490)
(37053)
(5716)
(29278)
(5106)
(23713)
7783
17572
6503
17127
4988
16503
3595
15701
2790
14721
2291
13563
1953
12226
1708
10712
1522
9019
1251**
6257**
1058**
4597**
910**
3520**
(34620)
(78164)
(28927)
(76184)
(22188)
(73409)
(15991)
(69841)
(12410)
(65482)
(10191)
(60331)
(8687)
(54384)
(7597)
(47649)
(6770)
(40118)
(5565)
(27832)
(4706)
(20448)
(4048)
(15658)
7311
17416
5612
16774
3816
15876
2790
14721
2213
13310
1846
11642
1591
9717
1401
7725
1251**
6257**
1026**
4345**
859**
3192**
(32521)
(77470)
(24963)
(74614)
(16974)
(70620)
(12410)
(65478)
(9844)
(59206)
(8211)
(51786)
(7077)
(43223)
(6232)
(34362)
(5565)
(27832)
(4564)
(19327)
(3821)
(14199)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
17
15/8
(41.3)
B11A
31/4
(82.5)
15/8
(41.3)
3/8
(9.5)
3/8
(9.5)
9/32
7/8
(22.2)
(7.1)
Y
27/16
(61.9)
X
1.1197
(28.4)
13/16
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
B12
B12A
Areas of
Section
Weight
lbs./ft.
kg/m
2.484
4.969
(3.70)
Moment of
Inertia (I)
in.4
cm4
Section
Modulus (S)
in.3
cm3
Y - Y Axis
Radius of
Gyration (r)
in.
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm
(2.17)
(3.58)
cm4
in.3
Radius of
Gyration (r)
cm3
in.
cm
.680
.680
(1.73)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
27/16
(61.9)
47/8
(123.8)
X
15/8
(41.3)
X
Y
13/16
(20.6)
1.1199
(28.4)
15/8
(41.3)
27/16
(61.9)
B12A
B12B
18
31/4
(82.5)
(1.73)
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Style
Lbs.
In.
mm
Lbs.
Lbs.
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
3880
3880*
3273
3880*
2182
3880*
1636
3880*
1309
3847*
1091
3206
935
2748
818
2404
727
2137
655
1924
(17259)
(17259)
.009
.001
.038
.008
.086
.028
.153
.067
.240
.130
.345
.188
.470
.255
.614
.334
.777
.422
.959
.521
(.23)
(.02)
3880
3880*
3273
3880*
2182
3880*
1636
3880*
1309
3847*
947
3206
696
2748
533
2404
421
2137
341
1844
(17259)
(17259)
3880
3880*
3273
3880*
2182
3880*
1421
3880*
909
3847*
632
3206
464
2509
355
1921
281
1518
227
1229
(17259)
(17259)
(14559)
(17259)
(9706)
(17259)
(7277)
(17259)
(5823)
(17112)
(4853)
(14261)
(4159)
(12224)
(3638)
(10693)
(3234)
(9506)
(2913)
(8558)
(.96)
(.20)
(2.18)
(.71)
(3.88)
(1.70)
(6.09)
(3.30)
(8.76)
(4.77)
(11.94)
(6.48)
(15.59)
(8.48)
(19.73)
(10.72)
(24.36)
(13.23)
(14559)
(17259)
(9706)
(17259)
(7277)
(17259)
(5823)
(17112)
(4212)
(14261)
(3096)
(12224)
(2371)
(10693)
(1873)
(9506)
(1517)
(8202)
(14559)
(17259)
(9706)
(17259)
(6321)
(17259)
(4043)
(17112)
(2811)
(14261)
(2064)
(11160)
(1579)
(8545)
(1250)
(6752)
(1010)
(5467)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Channel
Style
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
B12
B12A
(45105)
(92612)
(41119)
(91273)
(35288)
(89040)
(28406)
(85917)
(21285)
(81900)
(16534)
(76994)
(13576)
(71194)
(11565)
(64499)
(10102)
(56915)
(8981)
(48436)
4752
8023
4514
7956
4137
7844
3638
7688
2963
6941
2197
5334
1717
4176
1391
3328
1155
2692
977
2202
(21138)
(35688)
(20079)
(35390)
(18402)
(34892)
(16182)
(34198)
(13180)
(30875)
(9773)
(23727)
(7637)
(18576)
(6187)
(14803)
(5137)
(11974)
(4346)
(9795)
(45581)
(92763)
(42876)
(91878)
(35748)
(90405)
(33637)
(88346)
(27957)
(85695)
(22081)
(82452)
(17766)
(78622)
(14901)
(74205)
(12869)
(69196)
(11356)
(63600)
K = 1.0
Lbs.
N
9965
20763
8629
20293
6786
19509
4785
18412
3523
17002
2806
15278
2345
13240
2019
10889
1773
8610
1577
6974
(44326)
(92358)
(38384)
(90268)
(30185)
(86780)
(21285)
(81900)
(15671)
(75628)
(12482)
(67960)
(10431)
(58894)
(8981)
(48436)
(7886)
(38299)
(7015)
(31022)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
19
K = 1.2
Lbs.
N
9756
20694
7933
20017
5572
18889
3717
17309
2806
15278
2271
12795
1913
9884
1650
7567
1446
5979
1279**
4843**
(43397)
(92051)
(35288)
(89040)
(24785)
(84022)
(16534)
(76994)
(12482)
(67960)
(10102)
(56915)
(8509)
(43966)
(7339)
(33659)
(6432)
(26596)
(5689)
(21543)
In.
Channel
B22 Channel
B22
Thickness: 12 Gauge (2.6 mm)
Standard lengths: 10 (3.05 m) & 20 (6.09 m)
Standard finishes: Plain, Dura-Green, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum
Weight: 1.90 Lbs./Ft. (2.83 kg/m)
15/8
(41.3)
3/8
(9.5)
15/8
3/8
(9.5)
7/8
(22.2)
9/32
(7.1)
(41.3)
.7252
(18.4)
13/16
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
B22
B22A
B22X
Weight
Areas of
Section
Moment of
Inertia (I)
in.4
cm4
Section
Modulus (S)
lbs./ft.
kg/m
in.3
cm3
1.910
3.820
6.649
(2.84)
(5.69)
(9.89)
Y - Y Axis
Radius of
Gyration (r)
in.
cm
.583
.931
1.456
(1.48)
(2.36)
(3.70)
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm4
in.3
cm3
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
Y
15/8
(41.3)
X
Y
13/16
(20.6)
B22A
15/8
(41.3)
20
31/4
(82.5)
Radius of
Gyration (r)
in.
cm
.653
.653
.751
(1.66)
(1.66)
(1.91)
B22 Combinations
1.3833
(35.1)
15/8
(41.3)
(82.5)
(82.5)
15/8
15/8
31/4
(41.3)
(41.3)
31/4
(82.5)
(82.5)
X
X
Y
31/4
(82.5)
31/4
(82.5)
(82.5)
B22A3
31/4
15/8
(41.3)
31/4
31/4
X
1.3540
(34.4)
1.3250
(33.7)
.725
(18.4)
15/8
(41.3)
B22A4
B22AD3
B22B
27/16
(61.9)
15/8
Y
(41.3)
Y
31/4
31/4
(82.5)
13/16
31/4
(82.5)
(41.3)
(20.6)
.8416
(21.4)
15/8
(41.3)
B22C3
B22B3
B22C
15/8
(41.3)
27/16
15/8
(61.9)
(41.3)
Y
X
31/4
(123.8)
.842
(21.4)
(41.3)
(123.8)
Y
Y
15/8
7
X 4 /8
(82.5)
X
Y
47/8
(82.5)
X
.769
(19.5)
31/4
2.467
(62.7)
1.5813
(40.2)
.769
(19.5)
13/16
15/8
15/8
(20.6)
(41.3)
(41.3)
B22D
B22D3
B22E
15/8
(41.3)
B22E3
Wt. 3.80 Lbs./Ft. (5.65 kg/m) Wt. 5.70 Lbs./Ft. (8.48 kg/m)
27/16
(61.9)
1.730
(43.9)
X
.105
(2.6)
1.730
(43.9)
Y X
(101.6) X
X
1.795
(45.6)
1.231
(31.3)
1.168
(29.7)
2
(50.8)
213/16
.104
(2.6)
.105
(2.6)
4
(101.6)
(71.4)
47/8
(123.8)
B22LPL
B22PL
.918
(23.3)
B22X
7/16
(11.1)
1.835
(46.6)
21
15/8
(82.5)
1.9249
(48.9)
47/8
(123.8)
Beam Span
In.
mm
12
(305)
18
(457)
24
(609)
30
(762)
36
(914)
42
(1067)
48
(1219)
54
(1371)
60
(1524)
66
(1676)
72
(1829)
78
(1981)
84
(2133)
90
(2286)
96
(2438)
102
(2591)
108
(2743)
114
(2895)
120
(3048)
Channel
Style
Lbs.
In.
mm
Lbs.
Lbs.
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
2610
2610*
5790*
2269
2610*
5790*
1702
2610*
5790*
1361
2610*
5790*
1135
2610*
5790*
972
2610*
5790*
851
2405
5790*
756
2138
5790*
681
1924
5645
619
1749
5132
567
1603
4704
524
1480
4342
486
1374
4032
454
1283
3763
425
1202
3528
400
1132
3320
378
1069
3136
358
1013
2971
340
962
2822
(11610)
(11610)
(25755)
(10093)
(11610)
(25755)
(7571)
(11610)
(25755)
(6054)
(11610)
(25755)
(5049)
(11610)
(25755)
(4323)
(11610)
(25755)
(3785)
(10698)
(25755)
(3363)
(9510)
(25755)
(3029)
(8558)
(25110)
(2753)
(7780)
(22828)
(2522)
(7130)
(20924)
(2331)
(6583)
(19314)
(2162)
(6112)
(17935)
(2019)
(5707)
(16738)
(1890)
(5347)
(15693)
(1779)
(5035)
(14768)
(1681)
(4755)
(13949)
(1592)
(4506)
(13215)
(1512)
(4279)
(12553)
.014
.002
.001
.031
.007
.003
.056
.017
.008
.087
.033
.017
.126
.057
.029
.172
.091
.046
.224
.125
.068
.284
.158
.097
.351
.195
.130
.424
.236
.158
.505
.281
.188
.593
.330
.220
.687
.383
.255
.789
.440
.293
.898
.500
.334
1.013
.565
.377
1.136
.633
.422
1.266
.706
.471
1.403
.782
.521
(.35)
(.05)
(.02)
(.79)
(.18)
(.07)
(1.42)
(.43)
(.20)
(2.21)
(.84)
(.73)
(3.20)
(1.45)
(.73)
(4.37)
(2.31)
(1.17)
(5.69)
(3.17)
(1.73)
(7.21)
(4.01)
(2.46)
(8.91)
(4.95)
(3.30)
(10.77)
(5.99)
(4.01)
(12.83)
(7.14)
(4.77)
(15.06)
(8.38)
(5.59)
(17.45)
(9.73)
(6.48)
(20.04)
(11.17)
(7.44)
(22.81)
(12.70)
(8.48)
(25.73)
(14.35)
(9.57)
(28.85)
(16.08)
(10.72)
(32.15)
(17.93)
(11.96)
(35.63)
(19.86)
(13.23)
2610
2610*
5790*
2269
2610*
5790*
1702
2610*
5790*
1361
2610*
5790*
1135
2610*
5790*
972
2610*
5790*
758
2405
5790*
599
2138
5790*
485
1924
5645
401
1749
5132
337
1603
4704
287
1455
4342
248
1255
4032
216
1093
3763
190
961
3528
168
851
3320
150
759
3136
134
681
2971
121
615
2706
(11610)
(11610)
(25755)
(10093)
(11610)
(25755)
(7571)
(11610)
(25755)
(6054)
(11610)
(25755)
(5049)
(11610)
(25755)
(4323)
(11610)
(25755)
(3372)
(10698)
(25755)
(2664)
(9510)
(25755)
(2157)
(8558)
(25110)
(1784)
(7780)
(22828)
(1499)
(7130)
(20924)
(1276)
(6472)
(19314)
(1103)
(5582)
(17935)
(961)
(4862)
(16738)
(845)
(4275)
(15693)
(747)
(3785)
(14768)
(667)
(3376)
(13949)
(596)
(3029)
(13215)
(538)
(2735)
(12037)
2610
2610*
5790*
2269
2610*
5790*
1702
2610*
5790*
1294
2610*
5790*
899
2610*
5790*
660
2610*
5790*
505
2405
5790*
399
2024
5790*
323
1640
5645
267
1355
5132
225
1139
4704
191
970
4270
165
837
3682
144
729
3207
126
640
2819
112
567
2497
100
506
2227
90
454
1999
81
410
1804
(11610)
(11610)
(25755)
(10093)
(11610)
(25755)
(7571)
(11610)
(25755)
(5756)
(11610)
(25755)
(3999)
(11610)
(25755)
(2936)
(11610)
(25755)
(2246)
(10698)
(25755)
(1775)
(9003)
(25755)
(1437)
(7295)
(25110)
(1187)
(6027)
(22828)
(1001)
(5066)
(20924)
(849)
(4315)
(18994)
(734)
(3723)
(16378)
(640)
(3243)
(14265)
(560)
(2847)
(12539)
(498)
(2522)
(11107)
(445)
(2251)
(9906)
(400)
(2019)
(8892)
(360)
(1824)
(8024)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
22
Unbraced
Height
In.
Channel
Style
mm
(305)
18
(457)
24
(609)
30
(762)
36
(914)
42
(1067)
48
(1219)
54
(1371)
60
(1524)
66
(1676)
72
(1829)
78
(1981)
84
(2133)
90
(2286)
96
(2438)
102
(2591)
108
(2743)
114
(2895)
120
(3048)
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
10454
21625
46948
9950
21433
46531
9311
21164
45947
8582
20819
45198
7801
20397
44282
6998
19898
43198
6193
19322
41948
5392
18669
40530
4718
17940
38948
4202
17134
37198
3791
16251
35281
3456
15291
33197
3176
14255
30947
2936
13141
28529
2728
11951
25945
2545
10678
23182
2381
9524
20676
2234
8548
18558
2101
7715
16749
(46502)
(96193)
(208835)
(44260)
(95339)
(206980)
(41417)
(94142)
(204382)
(38174)
(92607)
(201051)
(34700)
(90730)
(196976)
(31128)
(88511)
(192154)
(27548)
(85948)
(186594)
(23985)
(83044)
(180286)
(20987)
(79801)
(173249)
(18691)
(76216)
(165465)
(16863)
(72288)
(156938)
(15373)
(68018)
(147667)
(14127)
(63409)
(137659)
(13060)
(58454)
(126903)
(16583)
(53160)
(115409)
(11321)
(47498)
(103118)
(10591)
(42365)
(91971)
(9937)
(38023)
(82550)
(9346)
(34318)
(74503)
4276
7002
18975
4153
6959
18859
3993
6898
18693
3802
6821
18485
3589
6728
18233
3360
6620
17940
3118
6496
17604
2864
6263
16973
2631
5340
14471
2434
4587
12431
2264
3968
10753
2116
3456
9366
1984
3028
8206
1867
2667
7227
1761
2359
6393
1664
2093
5672
1575
1867
5059
1494
1675
4539
1418
1512
4097
(19120)
(31146)
(84405)
(18473)
(30955)
(83899)
(17762)
(30684)
(84440)
(16912)
(30341)
(82225)
(15964)
(29927)
(81104)
(14946)
(29447)
(79801)
(13869)
(28895)
(78306)
(12740)
(27859)
(75499)
(11703)
(23753)
(64370)
(10827)
(20404)
(55296)
(10071)
(17650)
(47832)
(9412)
(15373)
(41662)
(8825)
(13469)
(36502)
(8305)
(11863)
(32147)
(7833)
(10493)
(28437)
(7402)
(9310)
(25230)
(7006)
(8305)
(22503)
(6645)
(7451)
(20190)
(6307)
(6726)
(18224)
10598
21677
47061
10253
21551
46787
9801
21373
46401
9268
21145
45906
8676
20866
45300
8048
20537
44586
7401
20157
43761
6746
19276
42825
6093
19244
41779
5441
18712
40624
4869
18129
39358
4412
17496
37984
4037
16812
36499
3724
16077
34903
3456
15291
33197
3225
14455
31382
3022
13568
29456
2842
12630
27420
2680
11642
25275
(47142)
(96424)
(209338)
(45607)
(95863)
(208119)
(43597)
(95072)
(206402)
(41226)
(94057)
(204200)
(38593)
(92816)
(201504)
(35799)
(91353)
(198328)
(32921)
(89663)
(194568)
(30008)
(87745)
(190495)
(27103)
(85601)
(185842)
(24203)
(83235)
(180704)
(21658)
(80642)
(175073)
(19625)
(77826)
(168961)
(17957)
(74783)
(162355)
(16565)
(71514)
(155256)
(15373)
(68018)
(147667)
(14345)
(64299)
(139594)
(13442)
(60353)
(131027)
(12642)
(56181)
(121970)
(11921)
(51786)
(112429)
10222
21539
46761
9481
21239
46110
8582
20819
45198
7601
20279
44026
6595
19619
42593
5595
18840
40901
4718
17940
38948
4090
16920
36733
3616
15781
34260
3242
14521
31525
2936
13141
28529
2680
11642
25275
2461
10076
21875
2270
8778
19057
2101
7715
16749
1951
6834
14836
1816
6096
13234
1694
5471
11877
1583**
4937
10718
(45470)
(95810)
(208003)
(42173)
(94476)
(205107)
(38174)
(92607)
(201051)
(33811)
(90205)
(195837)
(28336)
(87269)
(189463)
(24888)
(83804)
(181937)
(20987)
(79801)
(173254)
(18193)
(75264)
(163396)
(16085)
(70197)
(152396)
(14421)
(64592)
(140230)
(13060)
(58454)
(126903)
(11921)
(51786)
(112429)
(10947)
(44820)
(97305)
(10097)
(39046)
(84770)
(9346)
(34318)
(74503)
(8678)
(30399)
(65994)
(8078)
(27116)
(58868)
(7535)
(24336)
(52831)
(7041)
(21961)
(47676)
9950
21433
46531
8955
21001
45593
7801
20397
44282
6595
19619
42593
5392
18669
40530
4444
17546
38092
3791
16251
35281
3310
14782
32092
2936
13141
28529
2634
11328
24593
2381
9524
20676
2166
8115
17617
1980
6998
15192
1816
6096
13234
1671
5357
11630
1542**
4746
10303
1426**
4233
9190
1322**
3799**
8247
1228**
3429**
7444
(44260)
(95339)
(206980)
(39834)
(93417)
(202808)
(34700)
(90730)
(196976)
(29336)
(87269)
(189463)
(23985)
(83044)
(180286)
(19768)
(78048)
(169441)
(16863)
(72288)
(156938)
(14723)
(65753)
(142752)
(13060)
(58454)
(126903)
(11716)
(50389)
(109395)
(10591)
(42365)
(91971)
(9635)
(36097)
(78364)
(8807)
(31128)
(67577)
(8078)
(27116)
(58868)
(7433)
(23829)
(51733)
(6343)
(21111)
(45830)
(68599)
(18829)
(40879)
(5880)
(16899)
(36684)
(5462)
(15253)
(33112)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
23
12
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
B22
B22A
B22X
3/8
(9.5)
7/8
(22.2)
9/32
Y
15/8
(41.3)
(7.1)
X
.7304
(18.6)
13/16
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
lbs./ft.
B24
B24A
Areas of
Section
Weight
kg/m
1.442 (2.15)
2.884 (4.29)
Moment of
Inertia (I)
in.4
cm4
Section
Modulus (S)
in.3
Y - Y Axis
Radius of
Gyration (r)
cm3
in.
cm
.594
.941
(1.51)
(2.39)
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm4
in.3
Radius of
Gyration (r)
cm3
in.
cm
.662
.662
(1.68)
(1.68)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
31/4
Y
(82.5)
31/4
X
(82.5)
15/8
(41.3)
13/16
.730
13/16
(20.6)
15/8
(41.3)
15/8
15/8
(41.3)
(41.3)
B24B
31/4
(82.5)
15/8
(41.3)
(18.6)
(20.6)
B24A
X
Y
15/8
(41.3)
B24C
Wt. 2.80 Lbs./Ft. (4.16 kg/m)
24
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
.014
.002
.057
.014
.128
.048
.227
.115
.355
.195
.511
.281
.695
.383
.908
.500
1.149
.633
1.419
.782
(7784)
(7784)
(6134)
(7784)
(4088)
(7784)
(3065)
(7784)
(2451)
(6752)
(2046)
(5627)
(1752)
(4822)
(1534)
(4221)
(1361)
(3750)
(1228)
(3376)
1750
1750*
1379
1750*
919
1750*
607
1750*
389
1518
270
1265
198
990
152
758
120
599
97
485
(.35)
(.05)
(1.45)
(.35)
(3.25)
(1.22)
(5.76)
(2.92)
(9.02)
(4.95)
(12.98)
(7.14)
(17.65)
(9.73)
(23.06)
(12.70)
(29.18)
(16.08)
(36.04)
(19.86)
(7784)
(7784)
(6134)
(7784)
(4088)
(7784)
(2700)
(7784)
(1730)
(6752)
(1201)
(5627)
(881)
(4404)
(676)
(3372)
(534)
(2664)
(431)
(2157)
1750
1750*
1379
1750*
720
1750*
405
1750*
259
1294
180
898
132
660
101
505
80
399
65
323
(7784)
(7784)
(6134)
(7784)
(3203)
(7784)
(1801)
(7784)
(1152)
(5756)
(800)
(3994)
(587)
(2936)
(449)
(2246)
(356)
(1775)
(289)
(1437)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
Channel
Style
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
B24
B24A
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
6441
13212
5874
12993
5038
12627
4043
12115
3008
11456
2324
10651
1898
9700
1608
8602
1397
7358
1236
6024
(28651)
(58770)
3077
4988
2896
4924
2619
4819
2272
4675
1873
4020
1562
3048
1340
2362
1175
1866
1046
1498
942
1216
(13687)
(22188)
6509
13237
6124
13092
5535
12851
4800
12512
3978
12078
3123
11546
2502
10918
2089
10194
1796
9373
1578
8455
(28953)
(58881)
6330
13171
5483
12828
4302
12256
3008
11456
2200
10427
1740
9169
1444
7683
1236
6024
1078
4760
953**
3856
(28157)
(58587)
6198
13121
5038
12627
3516
11804
2324
10651
1740
9169
1397
7358
1168
5464
1000
4184
870**
3306
764**
2677**
(27570)
(58365)
(26129)
(57796)
(22410)
(56167)
(17984)
(53890)
(13380)
(50959)
(10337)
(47378)
(8443)
(43148)
(7153)
(38263)
(6214)
(32730)
(5498)
(26796)
(12882)
(21903)
(11650)
(21436)
(10106)
(20795)
(8331)
(17882)
(6948)
(13558)
(5960)
(10506)
(5226)
(8300)
(4653)
(6663)
(4190)
(5409)
(27241)
(58236)
(24621)
(57164)
(21351)
(55656)
(17695)
(53725)
(13892)
(51359)
(11129)
(48565)
(9292)
(45345)
(7989)
(41693)
(7019)
(37610)
(24389)
(57062)
(19136)
(54517)
(13380)
(50959)
(9786)
(46381)
(7740)
(40786)
(6423)
(34175)
(5498)
(26796)
(4795)
(21173)
(4239)
(17152)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
25
(22410)
(56167)
(15640)
(52507)
(10337)
(47378)
(7740)
(40786)
(6214)
(32730)
(5195)
(24305)
(4448)
(18611)
(3870)
(14706)
(3398)
(11908)
12
Channel
Style
3/8
(9.5)
3/8
(9.5)
7/8
(22.2)
9/32
27/64
(7.1)
(10.7)
15/8
(41.3)
27/64
.7745
(19.7)
(10.7)
13/16 Y
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
B26
B26A
Areas of
Section
Weight
lbs./ft.
kg/m
1.234
2.467
(1.84)
(3.67)
Moment of
Inertia (I)
in.4
cm4
Section
Modulus (S)
in.3
Y - Y Axis
Radius of
Gyration (r)
cm3
in.
cm
.607
.988
(1.54)
(2.51)
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm4
in.3
Radius of
Gyration (r)
cm3
in.
cm
(3.15)
(6.31)
.656
.656
(1.67)
(1.67)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
31/4
(82.5)
1
X 3 /4
1
X 3 /4
(82.5)
X
Y
(82.5)
13/16
.774
(20.6)
(19.7)
15/8
B26A
(41.3)
(41.3)
(41.3)
Y 15/8
5
Y 1 /8
15/8
13/16
15/8
(20.6)
(41.3)
(41.3)
15/8
(41.3)
B26B
B26C
26
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Style
Lbs.
In.
mm
Lbs.
Lbs.
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
1220
1220*
1163
1220*
775
1220*
581
1220*
465
1220*
388
1052
332
902
291
789
258
702
233
631
(5427)
(5427)
.014
.001
.057
.012
.128
.040
.228
.096
.357
.188
.514
.281
.699
.383
.913
.500
1.156
.633
1.427
.782
(.35)
(.02)
1220
1220*
1163
1220*
775
1220*
509
1220*
326
1220*
226
1052
166
824
127
631
101
498
81
404
(5427)
(5427)
1220
1220*
1163
1220*
603
1220*
339
1220*
217
1076
151
747
111
549
85
420
67
332
54
269
(5427)
(5427)
(5173)
(5427)
(3447)
(5427)
(2584)
(5427)
(2068)
(5427)
(1726)
(4679)
(1477)
(4012)
(1294)
(3509)
(1147)
(3122)
(1036)
(2807)
(1.45)
(.30)
(3.25)
(1.01)
(5.79)
(2.44)
(9.07)
(4.77)
(13.05)
(7.14)
(17.75)
(9.73)
(23.19)
(12.70)
(29.36)
(16.08)
(36.24)
(19.86)
(5173)
(5427)
(3447)
(5427)
(2264)
(5427)
(1450)
(5427)
(1450)
(4679)
(738)
(3665)
(565)
(2807)
(449)
(2215)
(360)
(1797)
(5173)
(5427)
(2682)
(5427)
(1508)
(5427)
(965)
(4786)
(965)
(3323)
(494)
(2442)
(378)
(1868)
(298)
(1477)
(240)
(1196)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
Channel
Style
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
B26
B26A
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
4002
8151
3740
8051
3336
7883
2828
7648
2251
7346
1705
6977
1358
6541
1129
6038
967
5467
847
4830
(17802)
(36257)
2216
3630
2109
3591
1941
3528
1725
3441
1469
3066
1203
2385
1011
1884
871
1512
766
1231
684
1015
(9857)
(16147)
4032
8163
3857
8096
3579
7986
3217
7831
2793
7631
2326
7388
1851
7100
1513
6767
1277
6391
1105
5970
(17935)
(36311)
3952
8133
3554
7975
2962
7713
2251
7346
1603
6874
1233
6298
1003
5616
847
4830
734
3940
648
3192
(17579)
(36177)
3891
8109
3336
7883
2546
7505
1705
6977
1233
6298
967
5467
797
4486
680
3463
592**
2736
523**
2216**
(17308)
(36070)
(16636)
(35812)
(14839)
(35065)
(12579)
(34020)
(10013)
(32676)
(7584)
(31035)
(6040)
(29096)
(5022)
(26858)
(4301)
(24318)
(3767)
(21485)
(9381)
(15973)
(8634)
(15693)
(7613)
(15306)
(6534)
(13638)
(5351)
(10609)
(4497)
(8380)
(3874)
(6726)
(3407)
(5476)
(3042)
(4515)
(17157)
(36013)
(15920)
(35523)
(14310)
(34834)
(12424)
(33944)
(10346)
(32863)
(8233)
(31582)
(6730)
(30101)
(5680)
(28428)
(4915)
(26556)
(15809)
(35474)
(13175)
(34309)
(10013)
(32676)
(7130)
(30577)
(5484)
(28015)
(4461)
(24981)
(3767)
(21485)
(3265)
(17526)
(2882)
(14199)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
27
(14838)
(35065)
(11325)
(33384)
(7584)
(31035)
(5484)
(28015)
(4301)
(24318)
(3545)
(19955)
(3025)
(15404)
(2633)
(12170)
(2326)
(9857)
In.
Channel
3/8
(9.5)
3/8
(9.5)
7/8
(22.2)
9/32
Y
13/8
(7.1)
(34.9)
.6052
(15.4)
13/16
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
B32
B32A
Areas of
Section
Weight
Moment of
Inertia (I)
in.4
cm4
Section
Modulus (S)
lbs./ft.
kg/m
in.3
1.733
3.467
(2.58)
(5.16)
Y - Y Axis
Radius of
Gyration (r)
cm3
in.
cm
.496
.782
(1.26)
(1.99)
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm4
in.3
Radius of
Gyration (r)
cm3
in.
cm
.642
.642
(1.63)
(1.63)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
13/8
15/8
(41.3)
15/8
(41.3)
Y
(34.9)
Y
X
23/4
(69.8)
X
X
X
31/4
31/4
(82.5)
(82.5)
X
Y
Y
13/16
(20.6)
.605
(15.4)
15/8
.687
(17.4)
13/8
(34.9)
13/8
(41.3)
(34.9)
B32A
B32B
B32C
Wt. 3.40 Lbs./Ft. (5.06 kg/m)
28
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Style
Lbs.
In.
mm
Lbs.
Lbs.
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
2210
2210*
1299
2210*
866
2210*
649
1817
520
1454
433
1211
371
1038
325
909
289
808
260
727
(9830)
(9830)
.016
.003
.065
.022
.147
.076
.262
.148
.410
.231
.590
.333
.803
.453
1.049
.591
1.327
.749
1.639
.924
(.40)
(.07)
2210
2210*
1299
2210*
866
2210*
495
1817
317
1454
220
1092
162
802
124
614
98
485
79
393
(9830)
(9830)
2210
2210*
1299
2210*
587
2210*
330
1638
211
1048
147
728
108
535
83
410
65
324
53
262
(9830)
(9830)
(5778)
(9830)
(3852)
(9830)
(2887)
(8082)
(2313)
(6468)
(1926)
(5387)
(1650)
(4617)
(1445)
(4043)
(1285)
(3594)
(1156)
(3234)
(1.65)
(.56)
(3.73)
(1.93)
(6.65)
(3.76)
(10.41)
(5.87)
(14.98)
(8.46)
(20.39)
(11.50)
(26.64)
(15.01)
(33.70)
(19.02)
(41.63)
(23.47)
(5778)
(9830)
(3852)
(9830)
(2202)
(8082)
(1410)
(6468)
(978)
(4857)
(720)
(3567)
(551)
(2731)
(436)
(2157)
(351)
(1748)
(5778)
(9830)
(2611)
(9830)
(1468)
(7286)
(938)
(4662)
(654)
(3238)
(480)
(2380)
(369)
(1824)
(289)
(1441)
(236)
(1165)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
Channel
Style
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
B32
B32A
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
10278
21320
9104
20806
7640
19950
6151
18751
4778
17210
3870
15326
3243
13100
2774
10525
2403
8316
1993
6736
(45719)
(94836)
4036
6557
3732
6431
3323
6228
2877
5954
2435
4692
2089
3448
1817
2609
1594
2014
1407
1592
1221
1289
(17953)
(29167)
10432
21378
9600
21039
8479
20474
7265
19682
6060
18665
4923
17421
4114
15951
3531
14256
3083
12334
2723
10203
(46404)
(95094)
10035
21224
8387
20421
6520
19083
4778
17210
3693
14801
2994
11858
2489
8798
1993
6736
1574**
5322
1275**
4311
(44638)
(94409)
9753
21106
7640
19950
5425
18023
3870
15326
2994
11858
2403
8316
1807**
6110
1384**
4678
1093**
3696**
886**
2994**
(43383)
(93884)
(40496)
(92550)
(33984)
(88742)
(27361)
(83408)
(21253)
(76554)
(17214)
(68173)
(14425)
(58272)
(12339)
(46817)
(10689)
(36991)
(8865)
(29963)
(16601)
(28606)
(14781)
(27703)
(12797)
(26485)
(10831)
(20871)
(9292)
(15337)
(8082)
(11605)
(7090)
(8959)
(6258)
(7081)
(5431)
(5734)
(42702)
(93586)
(37716)
(91073)
(32316)
(87550)
(26956)
(83026)
(21898)
(77492)
(18300)
(70953)
(15706)
(63414)
(13714)
(54864)
(12112)
(45385)
(37307)
(90837)
(29002)
(84885)
(21253)
(76554)
(16427)
(65838)
(13318)
(52747)
(11071)
(39135)
(8865)
(29963)
(7001)
(23673)
(5671)
(19176)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
29
(33984)
(88742)
(24131)
(80170)
(17214)
(68173)
(13318)
(52747)
(10689)
(36991)
(8038)
(27178)
(6156)
(20809)
(4862)
(16440)
(3941)
(13318)
In.
Channel
3/8
(9.5)
7/8
(22.2)
1
(25.4)
B42
B42A
lbs./ft.
kg/m
1.468
2.936
(2.18)
Areas of
Section
Moment of
Inertia (I)
.432
.864
(4.37)
X - X Axis
SECTION PROPERTIES
Weight
(7.1)
X
.4226
(10.7)
13/16
(20.6)
Channel
9/32
in.4
(2.79) .0554
cm4
Section
Modulus (S)
in.3
cm3
Y - Y Axis
Radius of
Gyration (r)
in.
.358
.558
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm
cm4
in.3
(.91)
(1.42)
cm3
in.
cm
(3.32)
.617
.617
(1.57)
(6.64)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
Y
Y
(25.4)
(50.8)
X 31/4
X
X
(82.5)
15/8
(41.3)
13/16
(20.6)
15/8
(41.3)
.428
(10.9)
1
(25.4)
B42A
B42B
30
Radius of
Gyration (r)
(1.57)
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Style
Lbs.
In.
mm
Lbs.
Lbs.
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
1538
1590*
769
1590*
513
1428
384
1071
308
857
256
714
220
612
192
535
171
476
154
428
(6841)
(7072)
.022
.005
.088
.038
.198
.114
.352
.203
.550
.318
.792
.457
1.079
.623
1.409
.813
1.783
1.029
2.202
1.271
(.56)
(.13)
1538
1590*
769
1590*
388
1428
218
1053
140
674
97
468
71
344
55
263
43
208
35
168
(6841)
(7072)
1538
1590*
582
1590*
259
1248
145
702
93
449
65
312
48
229
36
176
29
139
23
112
(6841)
(7072)
(3420)
(7072)
(2282)
(6352)
(1708)
(4764)
(1370)
(3812)
(1139)
(3176)
(978)
(2722)
(854)
(2380)
(760)
(2117)
(685)
(1904)
(2.23)
(.96)
(5.03)
(2.89)
(8.94)
(5.15)
(13.97)
(8.08)
(20.11)
(11.61)
(27.40)
(15.82)
(35.79)
(20.65)
(45.29)
(26.13)
(55.93)
(32.28)
(3420)
(7072)
(1726)
(6352)
(970)
(4684)
(623)
(2998)
(431)
(2082)
(316)
(1530)
(244)
(1170)
(191)
(925)
(155)
(747)
(2589)
(7072)
(1152)
(5551)
(645)
(3122)
(413)
(1997)
(289)
(1388)
(213)
(1018)
(160)
(783)
(129)
(618)
(102)
(498)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
Channel
Style
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
B42
B42A
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
9138
21094
8137
19757
7050
18094
5405
16139
3512
13906
2439
11387
1792
8645
1372**
6619
1084**
5230
878**
4236
(40648)
(93831)
3493
5834
3145
5585
2722
5237
2227
4818
1718
4352
1351
3856
1087
3332
891
2873
743
2495
628
2182
(15537)
(25951)
9283
21304
8540
20299
7657
19067
6786
17632
5272
16008
3694
14200
2714
12206
2078
10012
1642
7922
1330**
6417
(41293)
(94765)
8916
20793
7589
18964
5925
16654
3512
13906
2247
10710
1561**
7531
1147**
5533
878**
4236
3347
2711**
(39660)
(92492)
8670
20469
7050
18094
4335
15057
2439
11387
1561**
7531
1084**
5230
796**
3842
2942**
2324**
1883**
(38566)
(91050)
(36195)
(87883)
(31360)
(80486)
(24042)
(71790)
(15622)
(61857)
(10849)
(50652)
(7971)
(38455)
(6103)
(29443)
(4822)
(23264)
(3905)
(18842)
(13989)
(24843)
(12108)
(23295)
(9906)
(21431)
(7642)
(19358)
(6009)
(17152)
(4835)
(14821)
(3963)
(12780)
(3305)
(11098)
(2793)
(9706)
(37988)
(90294)
(34060)
(84814)
(30185)
(78431)
(23451)
(71207)
(16432)
(64165)
(12072)
(54295)
(9243)
(44535)
(7304)
(35239)
(5916)
(28544)
(33757)
(84356)
(26356)
(74080)
(15622)
(61857)
(9995)
(47640)
(6943)
(33499)
(5102)
(24612)
(3905)
(18842)
(14888)
(12059)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
31
(31360)
(80486)
(19283)
(66977)
(10849)
(50652)
(6943)
(33499)
(4822)
(23264)
(3541)
(17090)
(13086)
(10337)
(8376)
In.
Channel
3/8
(9.5)
3/8
(9.5)
7/8
(22.2)
13/16
9/32
(20.6)
(7.1)
X
Y
.3366
(8.5)
13/16
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
B52
B52A
Weight
Areas of
Section
lbs./ft.
kg/m
1.313
2.627
(1.95)
.386
.773
(3.91)
Moment of
Inertia (I)
in.4
cm4
.0320 (1.33)
(4.99) .1517 (6.31)
(2.49)
Section
Modulus (S)
in.3
cm3
.0673 (1.10)
.1868 (3.06)
Y - Y Axis
Radius of
Gyration (r)
in.
cm
.288
.443
(.73)
(1.13)
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm4
in.3
Radius of
Gyration (r)
cm3
in.
cm
(2.83)
.603
.603
(1.53)
(5.67)
(1.53)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
1.241
(31.5)
13/16
27/16
(20.6)
(41.3)
X
Y
15/8
(41.3)
15/8
(41.3)
Y
Y
Y
13/16
13/16
(20.6)
31/4
(82.5)
13/16
(20.6)
15/8
15/8
(41.3)
(20.6)
(41.3)
15/8
(41.3)
B52A
B52B3
B52B4
32
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Style
Lbs.
In.
mm
Lbs.
Lbs.
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
1079
1270*
539
1270*
360
1013
270
759
216
608
180
506
154
434
135
380
120
338
108
304
(4799)
(5649)
.026
.006
.106
.052
.240
.141
.427
.250
.667
.391
.960
.563
1.307
.766
1.707
1.001
2.160
1.267
2.667
1.564
(.66)
(.15)
1079
1270*
506
1270*
225
1013
126
607
81
388
56
270
41
198
32
152
25
120
20
97
(4799)
(5649)
1079
1270*
337
1270*
150
719
84
404
54
259
37
180
28
132
21
101
17
80
13
65
(4799)
(5649)
(2397)
(5649)
(1601)
(4506)
(1201)
(3376)
(961)
(2704)
(800)
(2251)
(685)
(1930)
(600)
(1690)
(534)
(1503)
(480)
(1352)
(2.69)
(1.32)
(6.09)
(3.58)
(10.84)
(6.35)
(16.94)
(9.93)
(24.38)
(14.30)
(33.20)
(19.45)
(43.36)
(25.42)
(54.86)
(32.18)
(67.74)
(39.72)
(2251)
(5649)
(1001)
(4506)
(560)
(2700)
(360)
(1726)
(249)
(1201)
(182)
(881)
(142)
(676)
(111)
(534)
(89)
(431)
(1499)
(5649)
(667)
(3198)
(373)
(1797)
(240)
(1152)
(164)
(800)
(124)
(587)
(93)
(449)
(75)
(356)
(58)
(289)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Channel
Style
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
B52
B52A
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
8407
19160
7519
17444
5397
15275
3178
12692
2034
9683
1412**
6780
1038**
4981
794**
3814
3013
2441**
(37396)
(85228)
3162
5290
2755
4955
2152
4496
1560
3963
1159
3383
891
2799
704
2337
570
1973
470
1684
394
1452
(14065)
(23531)
8543
19425
7879
18144
6653
16547
4785
14667
3081
12516
2139
10084
1572
7545
1203**
5777
951**
4564
770**
3697
(38001)
(86407)
8205
18777
6521
16412
3616
13376
2034
9683
1302**
6248
904**
4339
664**
3188
2441**
1928**
1562**
(36497)
(83524)
7989
18363
5397
15275
2511
11243
1412**
6780
904**
4339
3013
2214**
1695**
1339**
(35537)
(81682)
(33446)
(77595)
(24007)
(67946)
(14136)
(56457)
(9047)
(43072)
(6281)
(30159)
(4617)
(22156)
(3532)
(16965)
(13402)
(10858)
(12255)
(22041)
(9572)
(19999)
(6939)
(17628)
(5155)
(15048)
(3963)
(12450)
(3131)
(10395)
(2535)
(8776)
(2090)
(7491)
(1752)
(6459)
(35047)
(80708)
(29594)
(73605)
(21285)
(65242)
(13705)
(55674)
(9515)
(44856)
(6992)
(33562)
(5351)
(25697)
(4230)
(20301)
(3425)
(16445)
(29007)
(73004)
(16085)
(59499)
(9047)
(43072)
(5791)
(27792)
(4021)
(19301)
(2953)
(14181)
(10858)
(8576)
(6948)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
33
(24007)
(67946)
(11169)
(50011)
(6281)
(30159)
(4021)
(19301)
(13402)
(9848)
(7540)
(5956)
In.
Channel
3/8
(9.5)
3/8
(9.5)
7/8
(22.2)
9/32
13/16
(20.6)
(7.1)
X
Y
.3422
(8.7)
13/16
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
B54
B54A
Areas of
Section
Weight
lbs./ft.
kg/m
1.016
2.032
(1.51)
(3.02)
Moment of
Inertia (I)
.299
.598
in.4
Section
Modulus (S)
cm4
in.3
cm3
.0560 (.92)
.1510 (2.47)
Y - Y Axis
Radius of
Gyration (r)
in.
cm
.297
.453
(.75)
(1.15)
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm4
.1106 (4.60)
.2212 (9.12)
in.3
Radius of
Gyration (r)
cm3
.1361 (2.23)
.2722 (4.46)
in.
cm
.608
.608
(1.55)
(1.55)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
1.241
(31.5)
Y
X
15/8
(41.3)
27/16
(41.3)
13/16
13/16
(20.6)
Y
15/8
(41.3)
(20.6)
13/16
31/4
(82.5)
15/8
(41.3)
13/16
(20.6)
15/8
(20.6)
(41.3)
15/8
(41.3)
B54A
B54B3
B54B4
34
Channel
mm
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Style
Lbs.
In.
mm
Lbs.
Lbs.
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
870
870*
465
870*
310
832
233
624
186
499
155
416
133
357
116
312
103
277
93
250
(3870)
(3870)
.027
.005
.108
.043
.243
.141
.432
.250
.676
.391
.973
.563
1.324
.766
1.730
1.001
2.189
1.267
2.703
1.564
(.68)
(.13)
870
870*
430
870*
191
832
108
499
69
319
48
222
35
163
27
125
21
98
17
80
(3870)
(3870)
870
870*
287
870*
127
591
72
332
46
213
32
148
23
109
18
83
14
66
11
53
(3870)
(3870)
(2068)
(3870)
(1379)
(3701)
(1036)
(2775)
(827)
(2219)
(689)
(1850)
(591)
(1588)
(516)
(1388)
(458)
(1232)
(413)
(1112)
(2.74)
(1.09)
(6.17)
(3.58)
(10.97)
(6.35)
(17.17)
(9.93)
(24.71)
(14.30)
(33.63)
(19.45)
(43.94)
(25.42)
(55.60)
(32.18)
(68.65)
(39.72)
(1913)
(3870)
(849)
(3701)
(480)
(2219)
(307)
(1419)
(213)
(987)
(155)
(725)
(120)
(556)
(93)
(436)
(75)
(356)
(1276)
(3870)
(565)
(2629)
(320)
(1477)
(204)
(947)
(142)
(658)
(102)
(485)
(80)
(369)
(62)
(293)
(49)
(236)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Channel
Style
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
B54
B54A
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
6186
12763
5464
12135
4300
11087
2703
9620
1730
7734
1201
5571
883**
4093
676**
3134
534**
2476
2006**
(27516)
(56772)
2586
4060
2254
3857
1816
3549
1341
3169
995
2745
763
2291
603
1913
487
1616
401
1380
336
1190
(11503)
(18060)
6284
12835
5763
12420
5043
11728
3920
10759
2621
9514
1820
7992
1337
6200
1024**
4747
809**
3751
655**
3038
(27952)
(57093)
6032
12645
4968
11663
3076
10026
1730
7734
1107**
5134
769**
3566
565**
2620
2006**
1585**
1284**
(26831)
(56248)
5857
12501
4300
11087
2136
8729
1201
5571
769**
3566
534**
2476
1819**
1393**
1100**
(26053)
(55607)
(24305)
(53979)
(19127)
(49317)
(12023)
(42792)
(7695)
(34402)
(5342)
(24781)
(3928)
(18206)
(3007)
(13941)
(2375)
(11014)
(8923)
(10026)
(17157)
(8078)
(15787)
(5965)
(14096)
(4426)
(12210)
(3394)
(10191)
(2682)
(8509)
(2166)
(7188)
(1784)
(6138)
(1494)
(5293)
(25635)
(55247)
(22432)
(52169)
(17437)
(47858)
(11659)
(42320)
(8096)
(35550)
(5947)
(27579)
(4555)
(21116)
(3598)
(16685)
(2913)
(13513)
(22099)
(51879)
(13683)
(44598)
(7695)
(34402)
(4924)
(22837)
(3420)
(15862)
(2513)
(11654)
(8923)
(7050)
(5711)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
35
(19127)
(49317)
(9501)
(38828)
(5342)
(24781)
(3420)
(15862)
(2375)
(11014)
(8091)
(6196)
(4893)
12
15/8
(41.3)
7/8
(22.2)
3/8
(9.5)
3/8
(9.5)
9/32
13/16
(20.6)
(7.1)
.3706
(9.4)
X
Y
27/64
13/16
(10.7)
(20.6)
X - X Axis
SECTION PROPERTIES
Channel
B56
B56A
Weight
lbs./ft.
kg/m
.894
1.789
(1.33)
(2.66)
Areas of
Section
sq. in. cm2
.263
.526
Moment of
Inertia (I)
in.4
cm4
Section
Modulus (S)
in.3
Y - Y Axis
Radius of
Gyration (r)
cm3
.0546 (.89)
.1484 (2.43)
in.
cm
.303
.479
(.77)
(1.22)
Moment of
Section
Inertia (I) Modulus (S)
in.4
cm4
in.3
Radius of
Gyration (r)
cm3
in.
cm
(1.95)
.606
.606
(1.54)
(3.89)
(1.54)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
Y
Y
Y
X
15/8
(41.3)
27/16
(61.9)
31/4
(82.5)
X
13/16
(20.6)
13/16
(20.6)
15/8
1.207
(30.7)
13/16
15/8
(41.3)
13/16
(20.6)
15/8
(41.3)
(20.6)
(41.3)
15/8
(41.3)
B56A
B56B3
B56B4
36
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Style
Lbs.
In.
mm
Lbs.
Lbs.
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
610
610*
405
610*
270
610*
202
530
162
424
135
353
116
303
101
265
90
236
81
212
(2713)
(2713)
.027
.004
.109
.035
.245
.121
.435
.250
.680
.391
.980
.563
1.334
.766
1.742
1.001
2.205
1.267
2.722
1.564
(.68)
(.10)
610
610*
372
610*
165
610*
93
423
59
271
41
188
30
138
23
106
18
84
15
68
(2713)
(2713)
610
610*
248
610*
110
502
62
282
40
181
28
125
20
92
15
71
12
56
10
45
(2713)
(2713)
(1801)
(2713)
(1201)
(2713)
(898)
(2357)
(720)
(1886)
(600)
(1570)
(516)
(1348)
(449)
(1179)
(400)
(1050)
(360)
(943)
(2.77)
(.89)
(6.22)
(3.07)
(11.05)
(6.35)
(17.27)
(9.93)
(24.89)
(14.30)
(33.88)
(19.45)
(44.24)
(25.42)
(56.01)
(32.18)
(69.14)
(39.72)
(1655)
(2713)
(734)
(2713)
(413)
(1881)
(262)
(1205)
(182)
(836)
(133)
(614)
(102)
(471)
(80)
(373)
(67)
(302)
(1103)
(2713)
(489)
(2233)
(276)
(1699)
(178)
(805)
(124)
(556)
(89)
(409)
(67)
(316)
(53)
(249)
(44)
(200)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral
bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
84
(2133)
96
(2438)
108
(2743)
120
(3048)
Channel
Style
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
B56
B56A
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
4968
10237
4367
9762
3572
8969
2335
7860
1495
6434
1038
4731
763**
3476
584**
2661
461**
2103
1703**
(22099)
(45536)
2182
3365
1903
3202
1557
2955
1164
2649
862
2307
661
1937
522
1619
422
1368
348
1169
291
1008
(9706)
(14968)
5044
10291
4624
9977
4034
9454
3290
8722
2264
7780
1572
6629
1155
5269
884**
4031
699**
3185
566**
2580
(22437)
(45776)
4845
10148
3985
9405
2658
8167
1495
6434
957
4360
664**
3028
488**
2224
1703**
1346**
1090**
(21551)
(45140)
4702
10039
3572
8969
1845
7186
1038
4731
664**
3028
461**
2103
1545**
1183**
934**
(20915)
(44655)
(19425)
(43423)
(15889)
(39896)
(10386)
(34963)
(6650)
(28620)
(4617)
(21044)
(3394)
(15462)
(2598)
(11837)
(2050)
(9354)
(7575)
(8465)
(14243)
(6926)
(13144)
(5178)
(11783)
(3834)
(10262)
(2940)
(8616)
(2322)
(7201)
(1877)
(6085)
(1548)
(5200)
(1294)
(4484)
(20568)
(44380)
(17944)
(42053)
(14634)
(38797)
(10071)
(34607)
(6992)
(29487)
(5137)
(23437)
(3932)
(17931)
(3109)
(14167)
(2417)
(11476)
(17726)
(41835)
(11823)
(36328)
(6650)
(28620)
(4257)
(19394)
(2953)
(13469)
(2171)
(9893)
(7575)
(5987)
(4848)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
37
(15889)
(39896)
(8207)
(31965)
(4617)
(21044)
(2953)
(13469)
(2050)
(9354)
(6872)
(5262)
(4154)
In.
Channel
Telescoping Channel
BTS22TH
Can be secured at any point of system
Order BTS22TH & B22TH separately
Thickness: 12 Gauge (1.5 mm)
Standard lengths: 10 (3.05 m)
Standard finishes: Dura-Green, Yellow Zinc Dichromate,
Hot-Dipped Galvanized
Resistance to slip*
700 lbs.
1/4
thick 2-hole
fitting with (2)
1/2 bolts &
channel nuts.
Typical of many
standard fittings.
1/2
bolt
& nut
BTS22TH
TELESCOPING STRUT
Fits over all 15/8 x 15/8 channels 9/16 holes on 17/8 centers 12 gauge material thickness
Section Properties
Weight Area
Channel
2
lbs./ft.
BTS22TH
1.934
In
Cx
X-X Axis
Ix
Sx
In
In4
In3
rx
In
Cy
Y-Y Axis
Iy
Sy
In
In4
In3
7/8
ry
In
Y Cy
Cx
17/8
CL
Y
17/8
Section properties are based on nominal metal thickness, and overall dimensions.
B22TH
THREE HOLE STRUT
9/16
Section Properties
Weight Area
Channel
2
lbs./ft.
B22TH
1.760
In
Cx
X-X Axis
Ix
Sx
In
In4
In3
Y Cy
rx
In
Cy
Y-Y Axis
Iy
Sy
In
In4
In3
7/8
ry
In
Cx
15/8
CL
Y
15/8
Section properties are based on nominal metal thickness, and overall dimensions.
Cy
7/8
X-X Axis
Section Properties
Channel
Weight Area
Cx
Ix
Sx
rx
In2
In4
Combination
lbs./ft.
In
In3
In
BTS22TH/B22TH 3.597 0.8474 0.9773 0.4126 0.4222 0.6978
Cy
Y-Y Axis
Iy
Sy
ry
In
In4
In
In3
Section properties are based on nominal metal thickness, and overall dimensions.
38
Cx
17/8
X
CL
Y
17/8
Telescoping Channel
BEAM LOADING DATA
B22TH
Beam Load Data x-x Axis
Beam Allowable Resulting Allowable Load
Span
Load
Deflection
@ Deflection=
in
lbs*
in
1/240 Span
12
24
36
48
60
72
84
96
108
120
2225
1610
1071
800
637
528
449
390
344
306
0.015
0.061
0.136
0.243
0.379
0.546
0.743
0.970
1.228
1.516
Beam
Span
3225
1610
1071
658
417
286
206
153
116
90
B22TH
BTS22TH
12
24
36
48
60
72
84
96
108
120
4203
2099
1396
1044
831
689
587
510
450
401
0.012
0.050
0.112
0.200
0.312
0.450
0.612
0.799
1.012
1.249
Beam
Span
4203
2099
1396
1044
664
456
330
248
190
149
BTS22TH
7033
3511
2335
1745
1389
1151
980
851
749
668
0.013
0.051
0.115
0.205
0.320
0.460
0.627
0.819
1.036
1.279
Beam
Span
7033
3511
2335
1705
1082
742
536
401
307
239
*Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) with adequate lateral bracing (see page 11 for
further explanation). To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8.
39
Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
In.
31/4
27/16
15/8
15/8
15/8
13/8
1
13/16
13/16
13/16
mm
(82.5)
(61.9)
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)
Weight
Lbs./Ft.
kg/m
2.97
2.39
1.82
1.34
1.07
1.62
1.36
1.19
.91
.80
(4.42)
(3.55)
(2.71)
(1.99)
(50.8)
Typ.
(1.59)
(2.41)
9/16
x 11/8
(14.3)
Slots
(28.6)
(2.02)
(1.77)
(1.35)
(1.19)
Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
Weight
In.
mm
Lbs./Ft.
kg/m
31/4
27/16
15/8
15/8
15/8
13/8
1
13/16
13/16
13/16
(82.5)
2.94
2.36
1.79
1.32
1.06
1.59
1.33
1.16
.89
.79
(4.37)
(61.9)
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)
(3.51)
(2.66)
(1.96)
(101.6)
Typ.
(1.58)
13/32 x
3 Slots
(2.36)
(10.3)
(76.2)
(1.98)
(1.72)
(1.32)
(1.17)
Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
Weight
In.
mm
Lbs./Ft.
kg/m
31/4
(82.5)
(61.9)
3.00
2.42
1.85
1.36
1.09
1.65
1.39
1.22
.93
.82
(4.46)
27/16
15/8
15/8
15/8
13/8
1
13/16
13/16
13/16
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)
(3.60)
(2.75)
(2.02)
17/8
(47.6)
Typ.
(1.62)
(2.45)
(2.07)
(1.81)
(1.38)
(1.22)
40
(14.3)
Height H
Part No.
Thickness
B22TH
12 Ga. (2.6)
In.
mm
15/8
(41.3)
Weight
Lbs./Ft.
1.76
kg/m
(2.62)
17/8
Typ.
(47.6)
15/16
(23.8)
13/16
(20.6)
Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
In.
mm
31/4
27/16
15/8
15/8
15/8
13/8
1
13/16
13/16
13/16
(82.5)
(61.9)
(41.3)
(41.3)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)
Height H
Part No.
B11KO6
B12KO6
B22KO6
B24KO6
B26KO6
B32KO6
B42KO6
B52KO6
B54KO6
B56KO6
Weight
Lbs./Ft.
kg/m
3.05
2.47
1.90
1.40
1.12
1.70
1.44
1.27
.97
.85
(4.54)
(3.67)
Typ.
(152.4)
(2.83)
(2.08)
(1.66)
Typ.
(76.2)
(2.53)
(2.14)
(1.89)
(22.2)
(1.44)
(1.26)
B22SHA
(BACK TO BACK SH TYPE CHANNEL)
For beam loads use 90% of Channel Loading Chart
9/16
x 11/8
(14.3)
Height H
Thickness
Part No.
B22SHA 12 Ga. (2.6)
In.
mm
31/4
(82.5)
Slots
(28.6)
Weight
Lbs./Ft.
3.64
kg/m
(5.42)
Typ.
(50.8)
41
Part No.
B11S58
B12S58
B22S58
B24S58
B26S58
B32S58
B42S58
B52S58
B54S58
B56S58
Thickness
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
12 Ga. (2.6)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
16 Ga. (1.5)
Height H
In.
mm
1
3 /4
(82.5)
27/16 (61.9)
15/8
(41.3)
15/8
(41.3)
15/8
(41.3)
13/8
(34.9)
1
(25.4)
13/16
(20.6)
13/16
(20.6)
13/16
(20.6)
13/8
(34.9)
Typ.
Weight
Lbs./Ft. kg/m
2.94
(4.37)
2.36
(3.51)
1.79
(2.66)
1.32
(1.96)
1.06
(1.58)
1.59
(2.36)
1.33
(1.98)
1.16
(1.72)
.89
(1.32)
.79
(1.17)
11/16
(101.6)
x 25/8
(17.5) x (66.7)
Slots
11/16
Thickness
12 Ga. (2.6)
14 Ga. (1.9)
12 Ga. (2.6)
12 Ga. (2.6)
14 Ga. (1.9)
12 Ga. (2.6)
14 Ga. (1.9)
Weight
In.
mm
Lbs./Ft.
kg/m
15/8
15/8
13/8
1
1
13/16
13/16
(41.3)
1.79
1.32
1.59
1.33
0.98
1.16
.89
(2.66)
(41.3)
(34.9)
(25.4)
(25.4)
(20.6)
(20.6)
1
(25.4)
(1.96)
x 11/16
(6.3) x (17.5)
Slots
1/4
(2.36)
(1.98)
(1.46)
(1.72)
1/2
1/2
(38.1)
(38.1)
(1.32)
(152.4)
Thickness
12
14
16
12
12
12
14
16
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Weight
In.
mm
Lbs./Ft.
kg/m
(2.6)
15/8
(41.3)
15/8
15/8
13/8
1
13/16
13/16
13/16
(41.3)
1.85
1.36
1.09
1.65
1.39
1.22
.93
.82
(2.75)
(1.9)
(1.5)
(2.6)
(2.6)
(2.6)
(1.9)
(1.5)
(41.3)
(34.9)
(25.4)
(20.6)
(20.6)
(20.6)
(2.02)
(1.62)
(50.8)
(2.45)
(2.07)
(1.81)
(25.4)
(1.38)
(1.22)
42
43
Recommended Torque
Bolt Size
Foot/Lbs.
Nm
1/4-20
5/16-18
Bolt Size
NM
M6x1
12
M8 x1.25
17
Foot/Lbs.
6
8
11
15
13
3/8-16
19
26
1/2-13
50
68
46
Finish
PLN
Plain
ZN
CZ
HDG
SS4
SS6
AL
Electro-Plated Zinc
Chromium Zinc
Hot-Dipped Galvanized
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum
Specification
ASTM A108/A307 Gr. A,
ASTM A563, SAE J429
ASTM B633 SC1 Type III
ASTM F1136 Gr. 3
ASTM A153
ASTM F593
MPIF 35/ASTM F593
ASTM F468 S4
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
44
Nut Type
N = Standard Nut
TN = Twirl Nut
SN = Stud Nut
STN = Stud Twirl Nut
NW = Combo Nut
Washer
N 7 25 (*) WO
Channel Type
7 = Tall Channels
B11
B12
2 = Medium Channels
B22
B24
B26
B32
5 = Short Channels
B42
B52
B54
B56
Thread Size
21 = #8-32
22 = #10-24
27 = #10-32
24 = 1/4-20
23 = 5/16-18
28 = 3/8-16
26 = 7/16-14
25 = 1/2-13
55 = 5/8-11
75 = 5/8-11
78 = 7/8-9
Stud Length
* = Specify Length
of stud below
for Stud Nut or
Twirl Stud Nuts
3/4 = 3/4
1 = 1
11/4 = 11/4
11/2 = 11/2
Suffix
WO = Without Spring
** = Twirl Nuts or nuts
with springs have
blank suffix
S = Short Spring
M = Medium Spring
L = Long Spring
* = Twirl Nuts and nuts
without springs have
blank suffix
TWIRL-NUT
45
SPRING NUT
Suffix
Channel Nuts
Thread Size
N221WO
N227WO
N222WO
N224WO
N223WO
N228WO
N226WO
N225WO
N525WO
N255WO
N555WO
N275WO
N575WO
N278WO
Nut Thickness
#8-32
#10-32
#10-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
1/2-13
5/8-11
5/8-11
3/4-10
3/4-10
7/8-9
1/4
(6.3)
1/4
(6.3)
1/4
(6.3)
1/4
(6.3)
1/4
(6.3)
3/8
(9.5)
M6 x 1
M8 x 1.25
M10 x 1.5
M12 x 1.75
M12 x 1.75
3/8
(9.5)
1/2
(12.7)
3/8
(9.5)
1/2
(12.7)
3/8
(9.5)
1/2
(12.7)
3/8
(9.5)
1/2
(12.7)
1/4
(6.3)
1/4
(6.3)
3/8
(9.5)
3/8
(9.5)
1/2
(12.7)
Wt./C
Lbs.
kg
7.0
7.0
7.0
6.7
6.7
9.3
8.8
11.6
8.8
16.4
10.2
14.5
8.8
12.5
(3.17)
6.9
6.7
9.6
9.2
12.2
(3.13)
(3.17)
(3.17)
(3.04)
(3.04)
(4.22)
(3.99)
(5.26)
(3.99)
(7.44)
(4.62)
(6.58)
(3.99)
(5.67)
Metric Threads
BMS-6
BMS-8
BMS-10
BMS-12
BMS-D-12
46
(3.04)
(4.35)
(4.17)
(5.53)
Channel Nuts
700
Series
200
Series
500
Series
SPRING NUT
Part No.
Thread Size
Metric Threads
BMS-6L
BMS-6M
BMS-6S
BMS-8L
BMS-8M
BMS-8S
BMS-10L
BMS-10M
BMS-10S
BMS-12M
BMS-12S
BMS-D-12L
BMS-D-12M
Nut Thickness
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
#10-24
#10-24
#10-24
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
7/16-14
7/16-14
7/16-14
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
1/4
M6 x 1
M6 x 1
M6 x 1
M8 x 1.25
M8 x 1.25
M8 x 1.25
M10 x 1.5
M10 x 1.5
M10 x 1.5
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
3/8
1/2
1/2
3/8
1/2
1/2
3/8
1/2
1/2
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
kg
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(9.5)
(9.5)
(9.5)
(9.5)
(9.5)
(9.5)
(12.7)
(12.7)
(9.5)
(12.7)
(12.7)
(9.5)
(12.7)
(12.7)
(9.5)
(12.7)
(12.7)
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
6.7
6.7
6.7
6.7
6.7
6.7
9.3
9.3
9.3
8.8
8.8
8.8
11.6
11.6
8.8
16.4
16.4
10.2
14.5
14.5
8.8
12.5
12.5
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.04)
(3.04)
(3.04)
(3.04)
(3.04)
(3.04)
(4.22)
(4.22)
(4.22)
(3.99)
(3.99)
(3.99)
(5.26)
(5.26)
(3.99)
(7.44)
(7.44)
(4.62)
(6.58)
(6.58)
(3.99)
(5.67)
(5.67)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(9.5)
(9.5)
(9.5)
(9.5)
(9.5)
(12.7)
(12.7)
6.9
6.9
6.9
6.7
6.7
6.7
9.6
9.6
9.6
9.2
9.2
12.2
12.2
(3.13)
(3.13)
(3.13)
(3.04)
(3.04)
(3.04)
(4.35)
(4.35)
(4.35)
(4.17)
(4.17)
(5.53)
(5.53)
47
Wt./C
Lbs.
N721
N221
N521
N727
N227
N527
N722
N222
N522
N724
N224
N524
N723
N223
N523
N728
N228
N528
N726
N226
N526
N725
N225
N525
N755
N255
N555
N775
N275
N575
N778
N278
Channel Nuts
Note: See page 50 for resistance to
slip & page 51 for pull-out strength.
TWIRL-NUT Patented
Part No.
TN221
TN227
TN222
TN224
TN223
TN228
TN226
TN225
TN525
TN255
Metric
Threads
BMT-6
BMT-8
BMT-10
BMT-12
BMT-D-12
Thread Size
#8-32
#10-32
#10-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
1/2-13
5/8-11
M6 x 1
M8 x 1.25
M10 x 1.5
M12 x 1.75
M12 x 1.75
Nut Thickness
1/4
(6.3)
1/4
(6.3)
1/4
(6.3)
1/4
(6.3)
1/4
(6.3)
3/8
(9.5)
3/8
1/2
(9.5)
(12.7)
3/8
(9.5)
1/2
(12.7)
1/4
1/4
(6.3)
3/8
(9.5)
3/8
(9.5)
1/2
(12.7)
(6.3)
Wt./C
Lbs.
kg
7.0
7.0
7.0
6.7
6.7
9.3
8.8
11.6
8.8
11.0
(3.17)
6.9
6.7
9.6
9.2
12.2
(3.13)
(3.17)
(3.17)
(3.04)
(3.04)
(4.22)
(3.99)
(5.26)
(3.99)
(4.99)
(3.04)
(4.35)
(4.17)
(5.53)
Part No.
Thread Size
STN224-*
1/4-20
STN228-*
3/8-16
Nut Thickness
Wt./C
Lbs.
kg
1/4
(6.3)
8.1
(3.66)
3/8
(9.5)
12.9
(5.85)
STN225-*
1/2-13
1/2
(12.7)
18.2
(8.23)
STN525-*
1/2-13
3/8
(9.5)
15.4
(6.96)
Thread Size
SN224-*WO
1/4-20
SN228-*WO
3/8-16
Nut Thickness
Wt./C
Lbs.
kg
1/4
(6.3)
8.1
(3.66)
3/8
(9.5)
12.9
(5.85)
SN225-*WO
1/2-13
1/2
(12.7)
18.2
(8.23)
SN525-*WO
1/2-13
3/8
(9.5)
15.4
(6.96)
48
Channel Nuts
700
Series
200
Series
500
Series
Thread Size
SN724-*
1/4-20
SN224-*
1/4-20
Nut Thickness
Wt./C
Lbs.
kg
1/4
(6.3)
8.1
(3.66)
1/4
(6.3)
8.1
(3.66)
SN524-*
1/4-20
1/4
(6.3)
8.1
(3.66)
SN728-*
3/8-16
3/8
(9.5)
12.9
(5.85)
SN228-*
3/8-16
3/8
(9.5)
12.9
(5.85)
SN528-*
3/8-16
3/8
(9.5)
12.9
(5.85)
SN725-*
1/2-13
1/2
(12.7)
18.2
(8.23)
SN225-*
1/2-13
1/2
(12.7)
18.2
(8.23)
SN525-*
1/2-13
3/8
(9.5)
15.4
(6.96)
(3/4,
1,
11/4,
11/2)
Patent Number
7,604,444
Thread Size
NW524
1/4-20
NW528
3/8-16
NW525
1/2-13
NWM6
NWM8
NWM10
NWM12
M6
M8
M10
M12
Nut Thickness
Wt./C
Lbs.
kg
1/4
(6.3)
11.9
(5.40)
3/8
(9.5)
13.8
(6.26)
3/8
(9.5)
13.1
(5.94)
1/4
(6.3)
16.6
(7.50)
3/8
(9.5)
15.4
(7.00)
1/4
(6.3)
18.9
(8.57)
3/8
(9.5)
17.7
(8.00)
49
Channel Nuts
RESISTANCE TO SLIP
With Safety Factor of 3
Resistance to Slip
Thread
Size
Nut Part
Numbers
12 ga. Channel
Lbs.
16 ga. Channel
Lbs.
Lbs.
50
220
50
220
50
220
#10-24
100
440
100
440
100
440
#10-32
100
440
100
440
100
440
1/4-20
300
1330
300
1330
300
1330
5/16-18
450
2000
450
2000
450
2000
3/8-16
800
3560
600
2670
600
2670
7/16-14
1000
4450
800
3560
800
3560
1500
6670
1000
4450
1000
4450
1500
6670
1000
4450
1000
4450
1500
1500
1500
1500
6670
6670
6670
6670
1000
1000
1000
1000
4450
4450
4450
4450
1000
1000
1000
1000
4450
4450
4450
4450
7/8-9
1500
6670
1000
4450
1000
4450
M6 x 1
300
1330
300
1330
300
1330
M8 x 1.25
450
2000
450
2000
450
2000
M10 x 1.50
800
3560
600
2760
600
2760
BMS-D-12, BMS-D-12L,
BMS-D-12M, BMT-D-12
1500
6670
1000
4450
1000
4450
1500
6670
1000
4450
1000
4450
5/8-11
3/4-10
Metric Threads
14 ga. Channel
#8-32
1/2-13
M12 x 1.75
Resistance to Slip
of Channel Nut
Note: For mini channel nut information see page 203.
50
Channel Nuts
PULL-OUT STRENGTH
With Safety Factor of 3
Maximum pullout strength for B11 & B12 channels is limited to 1500 lbs. (6670 N).
Pull-Out Strength
Thread
Size
Nut Part
Numbers
12 ga. Channel
14 ga. Channel
16 ga. Channel
Lbs.
Lbs.
Lbs.
200
890
200
890
200
890
#10-24
250
1110
250
1110
250
1110
#10-32
250
1110
250
1110
250
1110
1/4-20
450
2000
450
2000
450
2000
5/16-18
750
3330
750
3330
750
3330
3/8-16
1100
4890
1000
4450
1000
4450
7/16-14
1500
6670
1200
5340
1000
4450
2000
8900
1400
6230
1000
4450
1500
6670
1400
6230
1000
4450
2000
1500
2000
1500
8900
6670
8900
6670
1400
1400
1400
1400
6230
6230
6230
6230
1000
1000
1000
1000
4450
4450
4450
4450
7/8-9
1500
6670
1400
6230
1000
4450
M6 x 1
450
2000
450
2000
450
2000
M8 x 1.25
750
3330
750
3330
750
3330
M10 x 1.50
1100
4890
1000
4450
1000
4450
BMS-D-12, BMS-D-12L,
BMS-D-12M, BMT-D-12
2000
8900
1400
6230
1000
4450
1500
6670
1400
6230
1000
4450
1/2-13
5/8-11
3/4-10
M12 x 1.75
Pull-Out Strength of
Channel Nut
51
Metric Threads
#8-32
Hardware
DCN 3/8
DOUBLE CONVEYOR NUT
Recommended torque - 19 ft./Lbs.
Allowable slip loading - 700 Lbs.(3.11kN)
Safety Factor of 3
Material: ASTM 1011SS Gr. 33
Finish: Electrodeposited zinc ASTM B633 SC1
Strut ordered separately
2
(50.8)
3
(76.2)
13/8
(34.9)
B501 SERIES
U-BOLT
Hex Nuts
Included
D
Thread
Size
Design Load
Part No.
B501-1/2
B501-3/4
B501-1
B501-11/4
B501-11/2
B501-2
B501-21/2
B501-3
B501-31/2
B501-4
B501-5
B501-6
B501-8
15/16
(23.8)
11/8
13/8
123/32
2
27/16
215/16
39/16
43/32
419/32
521/32
63/4
83/4
(28.6)
(29.9)
(43.6)
(50.8)
(61.9)
(74.6)
(90.5)
(94.6)
(116.7)
(143.6)
(171.4)
(222.2)
13/4
13/4
17/8
13/4
13/4
21/16
21/16
2
2
1
2 /4
21/4
25/8
25/8
C
(44.4)
(44.4)
(47.6)
(44.4)
(44.4)
(52.4)
(52.4)
(50.8)
(50.8)
(57.1)
(57.1)
(66.7)
(66.7)
11/2
15/8
15/8
115/32
17/16
17/8
113/16
13/4
123/32
121/32
2
23/8
23/8
D
(38.1)
5/16-18
(41.3)
5/16-18
(41.3)
5/16-18
(37.3)
5/16-18
(36.5)
5/16-18
(47.6)
3/8-16
(46.0)
3/8-16
(44.4)
3/8-16
(43.6)
3/8-16
(50.0)
3/8-16
(50.8)
1/2-13
(60.3)
5/8-11
(60.3)
5/8-11
Lbs.
kN
Wt./C
Lbs.
600 (2.67)
12
600 (2.67)
13
900 (4.00)
14
900 (4.00)
15
900 (4.00)
16
1200 (5.34)
27
1200 (5.34)
32
1800 (8.00)
36
1800 (8.00)
38
1800 (8.00)
42
2400 (10.70)
92
2400 (10.70) 176
2400 (10.70) 191
kg
(5.4)
(5.9)
(6.3)
(6.8)
(7.2)
(12.2)
(14.5)
(16.3)
(17.2)
(19.0)
(41.7)
(79.8)
(86.6)
B500 SERIES
SQUARE U-BOLT
Includes:
1 pc. U-Bolt only
2 pcs. 3/8-16 Hex Nuts
Additional sizes available
Standard finish: ZN, SS4
121/32
(42.1)
21/2
(63.5)
A
3/8-16
Threads
Part No.
B500-3-3/8
B500-5
A
33/8
5
(85.7)
(127.0)
1/2
(12.7)
Channel
Size
Lbs.
Wt./C
kg
15/8 x 15/8
31/4 x 15/8
25
33
(11.3)
(14.9)
52
Hardware
HHCS
SFHMS
Wt./C
Part No.
1/4 x 1/2 HHCS
1/4 x 3/4 HHCS
1/4 x 1 HHCS
1/4 x 11/4 HHCS
1/4 x 11/2 HHCS
5/16 x 1 HHCS
5/16 x 11/4 HHCS
5/16 x 11/2 HHCS
3/8 x 3/4 HHCS
3/8 x 1 HHCS
3/8 x 11/4 HHCS
3/8 x 11/2 HHCS
3/8 x 13/4 HHCS
3/8 x 2 HHCS
3/8 x 21/4 HHCS
3/8 x 21/2 HHCS
1/2 x 7/8 HHCS
1/2 x 1 HHCS
1/2 x 11/4 HHCS
1/2 x 11/2 HHCS
1/2 x 13/4 HHCS
1/2 x 2 HHCS
1/2 x 21/2 HHCS
Wt./C
Lbs.
kg
1.3
1.4
1.7
2.1
2.4
2.8
3.2
3.8
3.4
4.1
4.7
5.2
5.9
7.0
7.8
8.5
8.0
8.4
9.2
10.1
12.0
13.2
16.0
(.59)
(.63)
(.77)
(.95)
(1.09)
(1.27)
(1.45)
(1.72)
(1.54)
(1.86)
(2.13)
(2.36)
(2.67)
(3.17)
(3.54)
(3.85)
(3.63)
(3.81)
(4.17)
(4.58)
(5.44)
(5.99)
(7.26)
Part No.
1/4
1/2
x
SFHMS
x 5/8 SFHMS
1/4 x 3/4 SFHMS
5/16 x 1 SFHMS
3/8 x 11/2 SFHMS
3/8 x 2 SFHMS
3/8 x 21/4 SFHMS
3/8 x 21/2 SFHMS
1/2 x 1 SFHMS
1/2 x 11/4 SFHMS
1/2 x 11/2 SFHMS
1/2 x 21/2 SFHMS
1/4
(.54)
(.63)
(1.27)
(2.54)
(3.04)
(3.31)
(3.58)
(2.67)
(3.17)
(3.76)
(6.26)
Wt./C
Part No.
Wt./C
Lbs.
kg
1.2
1.5
1.8
2.0
2.6
3.1
3.4
4.6
5.3
(.54)
(.68)
(.80)
(.91)
(1.18)
(1.40)
(1.54)
(2.08)
(2.40)
Lbs.
kg
.9
1.2
1.5
1.7
1.9
2.5
2.9
3.3
4.0
4.5
5.1
6.3
7.1
7.7
(.41)
CNPSS
(.54)
(.68)
Standard finish: ZN
(.77)
(.86)
Wt./C
(1.13)
Part No.
(1.31)
(1.49)
3/8
(1.81)
3/8
(2.04)
1/2
(2.31)
1/2
(2.86)
1/2
(3.22)
5/8
(3.49)
5/8
x
x
x
x
x
x
x
11/2
CNPSS
2 CNPSS
11/2 CNPSS
2 CNPSS
21/2 CNPSS
2 CNPSS
21/2 CNPSS
53
Lbs.
kg
4.7
6.0
9.2
11.4
13.7
19.0
22.6
(2.13)
(2.72)
(4.17)
(5.17)
(6.21)
(8.62)
(10.25)
x 3/4 SHHMS
1/4 x 1 SHHMS
1/4 x 11/4 SHHMS
1/4 x 11/2 SHHMS
5/16 x 1 SHHMS
5/16 x 11/4 SHHMS
5/16 x 11/2 SHHMS
3/8 x 11/4 SHHMS
3/8 x 11/2 SHHMS
x 1/2 SRHMS
x 3/4 SRHMS
1/4 x 1 SRHMS
1/4 x 11/4 SRHMS
1/4 x 11/2 SRHMS
5/16 x 1 SRHMS
5/16 x 11/4 SRHMS
5/16 x 11/2 SRHMS
3/8 x 1 SRHMS
3/8 x 11/4 SRHMS
3/8 x 11/2 SRHMS
3/8 x 2 SRHMS
3/8 x 21/4 SRHMS
3/8 x 21/2 SRHMS
(.50)
1/4
1.1
1.2
1.4
2.8
5.6
6.7
7.3
7.9
5.9
7.0
8.3
13.8
SRHMS
1/4
kg
SHHMS
1/4
Part No.
Lbs.
Hardware
B446A
B446B
SWIVEL HANGER
(FEMALE ONLY)
SWIVEL HANGER
(MALE ONLY)
Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
Safety Factor of 3
Standard finish: ZN
Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
Safety Factor of 3
Standard finish: ZN
13/4
(44.4)
13/4
(44.4)
B
Wt./C
Wt./C
Part No.
B446A-3/8
B446A-1/2
B446A-5/8
B446A-3/4
Lbs.
3/8-16
9/32
(7.1)
1/2-13
3/8
(9.5)
HN
HN
5/8-11 HN
3/4-10 HN
15/32
(11.9)
9/16
(14.3)
13
15
34
45
Part No.
kg
(5.9)
B446B-3/8
3/8-16
9/32
(7.1)
(6.8)
B446B-1/2
B446B-5/8
B446B-3/4
1/2-13
3/8
(9.5)
15/32
(11.9)
9/16
(14.3)
(15.4)
(20.4)
HHCS
HHCS
5/8-11 HHCS
3/4-10 HHCS
B446C
B446
SWIVEL HANGER
(FEMALE-FEMALE)
SWIVEL HANGER
(FEMALE-MALE)
Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
Safety Factor of 3
Standard finish: ZN
Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
Safety Factor of 3
Standard finish: ZN
23/4
(69.8)
Lbs.
kg
16
20
42
60
(7.2)
(9.1)
(19.0)
(27.2)
23/4
(69.8)
A
1
(25.4)
Wt./C
Part No.
B446C-3/8
B446C-1/2
B446C-5/8
B446C-3/4
A
3/8-16
HN
1/2-13 HN
5/8-11 HN
3/4-10 HN
Wt./C
Lbs.
kg
Part No.
26
31
68
90
(11.8)
(14.0)
(30.8)
(40.8)
B446-3/8
B446-1/2
B446-5/8
B446-3/4
A
3/8-16
HN
1/2-13 HN
5/8-11 HN
3/4-10 HN
B
3/8-16
HHCS
1/2-13 HHCS
5/8-11 HHCS
3/4-10 HHCS
54
Lbs.
kg
28
36
78
112
(12.7)
(16.3)
(35.4)
(50.8)
Hardware
B617
Fig. 75
SHOULDER BOLT
SWIVEL ATTACHMENT
Standard finish: ZN
Wt./C 6 Lbs. (2.7 kg)
Standard finish: ZN
Sized for 3/8-16 threaded rods
UL Listed to support up to 4 Pipe per NFPA 13
Wt./C 13 Lbs. (5.9 kg)
2
(50.8)
HN
MSQN
HEX NUTS
Wt./C
Part No.
HN
5/16
HN
Wt./C
1/4
Lbs.
kg
.7
(.32)
MSQN
.6
(.27)
1.0
(.45)
MSQN 5/16
1.2
(.54)
3/8
1.8
(.81)
3/8
HN
1.5
(.68)
1/2
HN
3.6
(1.63)
5/8
HN
7.2
(3.26)
3/4
HN
11.1
(5.03)
7/8
HN
17.9
(8.12)
27.2
(12.34)
1 HN
Part No.
kg
MSQN
SQN
Wt./C
SQUARE NUTS
Part No.
kg
1/2
SQN
5.7
(2.58)
5/8
SQN
10.1
(4.58)
55
Lbs.
1/4
Lbs.
Hardware
Buzznut
Can be installed at any desired position on the ATR, eliminating
the need to thread hex nuts up along ATR.
Loading Safety Factor of 3.
Torque: 6 ft./lbs (8 Nm)
Available in Zinc Plated or 316 stainless steel.
Part No.
Thread Size
Loading
Wt./C
Lbs.
kN
Lbs.
kg
SLWN1/4
1/4-20
240
(1.07)
14.4
(6.5)
SLWN3/8
3/8-16
730
(3.24)
15.4
(7.0)
SLWN1/2
1/2-13
1350
(6.00)
18.8
(8.5)
SLWN5/8
5/8-11
2100
(9.33)
25.4
(11.5)
SLWNM6
M6
200
(0.90)
14.1
(6.4)
SLWNM8
M8
380
(1.70)
16.3
(7.4)
SLWNM10
M10
584
(2.60)
17.2
(7.8)
SLWNM12
M12
840
(3.70)
18.9
(8.6)
FW
FFW
FLAT WASHERS
O.D.
Part No.
Wt./C
Wt./C
in.
mm
Lbs.
kg
Part No.
Lbs.
kg
1/4
FW
47/64
(18.7)
.7
(.32)
1/4
x 11/4 FFW
2.2
(1.00)
5/16
FW
7/8
(22.2)
1.4
(.63)
1/4
x 11/2 FFW
3.1
(1.40)
3/8
FW
(25.4)
1.7
(.77)
3/8
x 11/4 FFW
2.0
(.91)
1/2
FW
13/8
(34.9)
3.9
(1.77)
3/8
3.0
(1.36)
5/8
FW
115/32
(37.3)
6.4
(2.90)
1/2
x 2 FFW
5.4
(2.45)
3/4
FW
(50.8)
10.9
(4.94)
7/8
FW
21/4
(57.1)
13.4
(6.08)
21/2
(63.5)
18.8
(8.53)
1 FW
11/2
FFW
LW
Wt./C
LOCK WASHERS
Part No.
1/4
LW
5/16
kg
.3
(.13)
.4
(.18)
LW
.6
(.27)
1/2
LW
1.3
(.59)
5/8
LW
2.4
(1.09)
3/4
LW
3.8
(1.72)
7/8
LW
5.9
(2.67)
8.8
(3.99)
3/8
LW
1 LW
56
Lbs.
Hardware
SC228B
SC228
HANGER ROD
STIFFENER
N228WO
3/8-16
Threads
11/2
SC228BS
(63.5)
Fig. 98
ROD STIFFENER
Fig. 98B
ROD STIFFENER w/BREAK-OFF BOLT HEAD
For 3/8 thru 7/8 ATR
Use with 12 ga. strut only, ordered separately
Secres channel to hanger rod for vertical seismic bracing
Uses a snap-off bolt head
Standard finish: ZN
Wt./C 13 Lbs. (5.9 kg)
SC-UB
7/8
For
thru
ATR
Strut ordered separately
Includes: (1) B3188-11/2WO U-Bolt
(2) 3/8-16 Hex Nuts
(1) 2-Hole Plate
Standard finish: ZN
Wt./C 50 Lbs. (22.7 kg)
2-Hole Plate
1/4 (6mm) x 15/8 (41mm) x 31/2 (89mm)
B3188-11/2 WO U-Bolt
Stiffner Channel
57
Hardware
ATR
ALL THREADED ROD
Available in 36 (91.4 cm), 72 (182.9 cm), 120 (304.8 cm), 144 (365.7 cm) lengths
Safety Factor of 5 on recommended load
Standard finish: Zinc-Plated, Stainless Steel Type 304
Part No.
& Size
ATR
ATR
ATR
ATR
ATR
ATR
ATR
ATR
Threads
Per Inch
1/4
20
18
16
13
11
10
9
8
5/16
3/8
1/2
5/8
3/4
7/8
Recommended Load
Lbs.
240
400
730
1350
2160
3230
4480
5900
kN
Lbs.
kg
(1.07)
12
19
29
53
89
123
170
225
(5.44)
(1.78)
(3.24)
(6.00)
(9.60)
(14.37)
(19.93)
(26.24)
(24.04)
(40.37)
(55.79)
(77.11)
(102.06)
Part No.
(8.62)
(13.15)
Size
Recommended
Load
Lbs.
B655-1/4
1/4-20
B655-5/16
B655-3/8
B655-1/2
B655-5/8
B655-3/4
B655-7/8
B655-1
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
Part No.
7/8
240
(1.07)
380
(1.69) 7/8
730
(3.24) 11/8
1350 (6.00) 13/4
1810 (8.05) 21/8
2710 (12.05) 21/4
3770 (16.77) 21/2
4960 (22.06) 23/4
Size
Recommended
Load
Lbs.
B656-3/8 x 1/4
B656-1/2 x 3/8
B656-5/8 x 1/2
B656-3/4 x 5/8
B656-7/8 x 3/4
3/8-16
Length
& 1/4-20
1/2-13 & 3/8-16
5/8-11 & 1/2-13
3/4-10 & 5/8-11
7/8-9 & 3/4-10
240
730
1350
1810
2710
(22.2)
(22.2)
(28.6)
(44.4)
(54.0)
(57.1)
(63.5)
(69.8)
(1.07)
(3.24)
(6.00)
(8.05)
(12.05)
1
11/4
11/4
11/2
13/4
BHR1225ZN
BHR1238ZN
BHR1250ZN
BHR1262ZN
1/4-20
3/8-16
1/2-13
5/8-11
kN
Lbs.
kg
240
730
1350
1500
(1.07)
41
63
98
148
(18.6)
(3.24)
(6.00)
(6.67)
(31.7)
(31.7)
(38.1)
(44.4)
(28.6)
(44.4)
(67.1)
58
(.86)
(25.4)
Wt./C
Lbs.
1.9
1.8
3.6
11.3
17.6
28.1
57.2
73.7
(.81)
(1.63)
(5.12)
(7.98)
(12.74)
(25.94)
(33.43)
Wt./C
Lbs.
kg
Length
Rod Size
Lbs.
kN
BHR SERIES
Part No.
Wt./C
kN
kg
3.7 (1.68)
6.6 (2.99)
11.6 (5.26)
20.6 (9.34)
39.4 (17.87)
KwikWire Hardware
Clamps
For Use With Wire
Rope Diameters
Part No.
BKC100
1/16
& 3/32
BKC200
1/8
3/16
&
Box
Qty.
100
50
KwikWire Clamp
Working Loads*
Wire
Rope
Dia.
Lbs.
Safety
Factor 5
BKC100
BKC100
1/16
0-75
25-150
BKC200
BKC200
1/8
Clamp
Part No.
3/32
3/16
25-250
50-640
15 = 96%
30 = 86%
45 = 70%
60 = 50%
Wire Rope
(Uncoated Galvanized Wire)
Part No.
7x7
Rope Dia.
in.
mm
Working Load
Lbs.
kg
Spool
(1)
1/16
(1.6)
96
(43.5)
500 ft.
BKW094
(1)
3/32
(2.3)
184
(83.4)
500 ft.
BKW125
(1)
1/8
(3.2)
340
(154.2)
500 ft.
BKW188
(2)
3/16
(4.8)
840
(381.0)
250 ft.
(1)
7 x 19
(2)
Instructions for installing the wire rope in the clamp - No tools are required.
1
59
BKW063
KwikWire Hardware
Box
Qty.
1/16
3/32
1/8
3/16
Cable Cutter
Part No.
Box
Qty.
BKCC
60
KwikWire Hardware
KwikWire hanger combines the
versatility of a bolt with an
adjustable wire rope solution.
Can be quickly installed in
existing anchors or metal
brackets with a nut.
Hanger
Part No.
BKF100-4
BKF100-6
Thread
Size
1/4-20
3/8-16
Loading* SF5
in.
mm
Lbs.
kg
1/16
(1.6)
45
(20.4)
3/32
(2.3)
(40.8)
1/16
(1.6)
90
45
3/32
(2.3)
90
(40.8)
(20.4)
Continue pushing
through until 1/4
minimum is extending
out the side of the
KwikWire Hanger
61
KwikWire Hardware
KwikWire Accessory Features
Assembly
Configuration
Leg
Termination
Leg
Length
Wire Rope
Diameter
Straight
Length
Assembly
or Kit
BK =
KwikWire
Blank =
Single Leg
A = Angle
Bracket w/Pin
Blank = See
Straight Length
063 = 1/16
Y = 2 Legs
H = Hook
18 = 18 Leg
Blank =
Loop w/
Plastic Tube
Blank =
Assembly
Only
3 - 3 Legs
L = Loop
30 = 30 Leg
18 = 18
K = Kit
(Assembly &
BKC100 Clamp)
Examples
094 = 3/32
T = Toggle
30 = 30
W = Fuse Cut
40 = 40
80 = 80
120 = 120
180 = 180
240 = 240
360 = 360
BKYT18-094-120K
BK Y T 18 - 094 - 120 K
Cooper B-Line KwikWire Accessory
2 legs - toggle leg termination - 18 legs - 3/32 diameter wire - 120 straight length - kit with clamp
BKL-063-120K
BK L - 063 - 120 K
Cooper B-Line KwikWire Accessory
single leg - looped leg termination - 1/16 diameter wire - 120 straight length - kit with clamp
KwikWire Hardware
Loop Termination
Wire Rope Dia.
Part No.
Length
in.
mm
in.
mm
BKL-063-40
1/16
(1.6)
40
(1016)
BKL-063-80
1/16
(1.6)
80
(2032)
BKL-063-120
1/16
(1.6)
120
(3048)
BKL-063-180
1/16
(1.6)
180
(4572)
BKL-063-240
1/16
(1.6)
240
(6096)
BKL-063-360
1/16
(1.6)
360
(9144)
BKL-094-40
3/32
(2.3)
40
(1016)
BKL-094-80
3/32
(2.3)
80
(2032)
BKL-094-120
3/32
(2.3)
120
(3048)
BKL-094-180
3/32
(2.3)
180
(4572)
BKL-094-240
3/32
(2.3)
240
(6096)
BKL-094-360
3/32
(2.3)
360
(9144)
New
Box Quantity - 20
5 bags containing 4 pieces per bag
Length
in.
mm
in.
mm
BKL-063-40K
1/16
(1.6)
40
(1016)
BKL-063-80K
1/16
(1.6)
80
(2032)
BKL-063-120K
1/16
(1.6)
120
(3048)
BKL-063-180K
1/16
(1.6)
180
(4572)
BKL-063-240K
1/16
(1.6)
240
(6096)
BKL-063-360K
1/16
(1.6)
360
(9144)
BKL-094-40K
3/32
(2.3)
40
(1016)
BKL-094-80K
3/32
(2.3)
80
(2032)
BKL-094-120K
3/32
(2.3)
120
(3048)
BKL-094-180K
3/32
(2.3)
180
(4572)
BKL-094-240K
3/32
(2.3)
240
(6096)
BKL-094-360K
3/32
(2.3)
360
(9144)
New
Part No.
Box Quantity - 20
5 bags containing 4 pieces per bag
Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp.
Available in lengths of 40, 80, 120, 180, 240, and 360.
63
KwikWire Hardware
Single Style Hook Termination
Wire Rope Dia.
New
Part No.
Length
in.
mm
in.
mm
BKH-094-40
3/32
(2.3)
40
(1016)
BKH-094-80
3/32
(2.3)
80
(2032)
BKH-094-120
3/32
(2.3)
120
(3048)
BKH-094-180
3/32
(2.3)
180
(4572)
BKH-094-240
3/32
(2.3)
240
(6096)
BKH-094-360
3/32
(2.3)
360
(9144)
Box Quantity - 20
5 bags containing 4 pieces per bag
Length
Part No.
in.
mm
in.
mm
BKH-094-40K
3/32
(2.3)
40
(1016)
BKH-094-80K
3/32
(2.3)
80
(2032)
BKH-094-120K
3/32
(2.3)
120
(3048)
BKH-094-180K
3/32
(2.3)
180
(4572)
BKH-094-240K
3/32
(2.3)
240
(6096)
BKH-094-360K
3/32
(2.3)
360
(9144)
Box Quantity - 20
5 bags containing 4 pieces per bag
Length
in.
mm
in.
mm
BKYH18-094
3/32
(2.3)
18
(457)
BKYH30-094
3/32
(2.3)
30
(762)
Box Quantity - 10
5 bags containing 2 pieces per bag
Hook designed to accept up to 3/8 diameter wire.
Available as a wire rope with hook termination only or as a ready-to-use kit with a
BKC100 clamp.
Available in lengths of 40, 80, 120, 180, 240, and 360.
Available in single, double (Y), and triple (3) leg styles
= Stock item, lead time 2 - 3 working days
64
KwikWire Hardware
Y Style Hook Termination
Leg Length
Part No.
BKYH18-094-40
Length
in.
mm
in.
mm
in.
mm
18
(457)
3/32
(2.3)
40
(1016)
(2.3)
80
(2032)
BKYH18-094-80
18
(457)
3/32
BKYH18-094-120
18
(457)
3/32
(2.3)
120
(3048)
BKYH18-094-180
18
(457)
3/32
(2.3)
180
(4572)
BKYH18-094-240
18
(457)
3/32
(2.3)
240
(6096)
BKYH18-094-360
18
(457)
3/32
(2.3)
360
(9144)
BKYH30-094-40
30
(762)
3/32
(2.3)
40
(1016)
BKYH30-094-80
30
(762)
3/32
(2.3)
80
(2032)
BKYH30-094-120
30
(762)
3/32
(2.3)
120
(3048)
BKYH30-094-180
30
(762)
3/32
(2.3)
180
(4572)
BKYH30-094-240
30
(762)
3/32
(2.3)
240
(6096)
(762)
3/32
(2.3)
360
(9144)
BKYH30-094-360
30
New
Box Quantity - 10
5 bags containing 2 pieces per bag
in.
Length
mm
in.
mm
in.
mm
18
(457)
(2.3)
40
(1016)
BKYH18-094-80K
18
(457)
3/32
(2.3)
80
(2032)
BKYH18-094-120K
18
(457)
3/32
(2.3)
120
(3048)
BKYH18-094-180K
18
(457)
3/32
(2.3)
180
(4572)
BKYH18-094-240K
18
(457)
3/32
(2.3)
240
(6096)
BKYH18-094-360K
18
(457)
3/32
(2.3)
360
(9144)
BKYH30-094-40K
30
(762)
3/32
(2.3)
40
(1016)
BKYH30-094-80K
30
(762)
3/32
(2.3)
80
(2032)
BKYH30-094-120K
30
(762)
3/32
(2.3)
120
(3048)
BKYH30-094-180K
30
(762)
3/32
(2.3)
180
(4572)
BKYH30-094-240K
30
(762)
3/32
(2.3)
240
(6096)
(762)
3/32
(2.3)
360
(9144)
BKYH30-094-360K
30
New
BKYH18-094-40K
3/32
Box Quantity - 10
5 bags containing 2 pieces per bag
65
KwikWire Hardware
Single Style Toggle Termination
Wire Rope Dia.
New
Part No.
Length
in.
mm
in.
mm
BKT-063-40
1/16
(1.6)
40
(1016)
BKT-063-80
1/16
(1.6)
80
(2032)
BKT-063-120
1/16
(1.6)
120
(3048)
BKT-063-180
1/16
(1.6)
180
(4572)
BKT-063-240
1/16
(1.6)
240
(6096)
BKT-063-360
1/16
(1.6)
360
(9144)
Box Quantity - 20
5 bags containing 4 pieces per bag
Length
Part No.
in.
mm
in.
mm
BKT-063-40K
1/16
(1.6)
40
(1016)
BKT-063-80K
1/16
(1.6)
80
(2032)
BKT-063-120K
1/16
(1.6)
120
(3048)
BKT-063-180K
1/16
(1.6)
180
(4572)
BKT-063-240K
1/16
(1.6)
240
(6096)
BKT-063-360K
1/16
(1.6)
360
(9144)
Box Quantity - 20
5 bags containing 4 pieces per bag
Length
in.
mm
in.
mm
BKYT12-063
1/16
(1.6)
12
(305)
BKYT18-063
1/16
(1.6)
18
(457)
BKYT30-063
1/16
(1.6)
30
(762)
Box Quantity - 10
5 bags containing 2 pieces per bag
Available as a wire rope with toggle termination only or as a ready-to-use kit with a
BKC100 clamp.
Available in lengths of 40, 80, 120, 180, 240, and 360.
Available in single, double (Y), and triple (3) leg styles
All triple (3) leg styles are non-stock, consult Cooper B-Line for lead times
= Stock item, lead time 2 - 3 working days
66
KwikWire Hardware
Y Style Toggle Termination
Leg Length
Length
Part No.
in.
mm
in.
mm
in.
mm
BKYT12-063-40
BKYT12-063-80
BKYT12-063-120
BKYT12-063-180
BKYT12-063-240
BKYT12-063-360
12
12
12
12
12
12
(305)
1/16
(1.6)
(1016)
(305)
1/16
(1.6)
(305)
1/16
(1.6)
(305)
1/16
(1.6)
(305)
1/16
(1.6)
(305)
1/16
(1.6)
40
80
120
180
240
360
BKYT18-063-40
BKYT18-063-80
BKYT18-063-120
BKYT18-063-180
BKYT18-063-240
BKYT18-063-360
18
18
18
18
18
18
(457)
1/16
(1.6)
(1016)
(457)
1/16
(1.6)
(457)
1/16
(1.6)
(457)
1/16
(1.6)
(457)
1/16
(1.6)
(457)
1/16
(1.6)
40
80
120
180
240
360
BKYT30-063-40
BKYT30-063-80
BKYT30-063-120
BKYT30-063-180
BKYT30-063-240
BKYT30-063-360
30
30
30
30
30
30
(762)
1/16
(1.6)
(1016)
(762)
1/16
(1.6)
(762)
1/16
(1.6)
(762)
1/16
(1.6)
(762)
1/16
(1.6)
(762)
1/16
(1.6)
40
80
120
180
240
360
(2032)
New
(3048)
(4572)
(6096)
(9144)
(2032)
(3048)
(4572)
(6096)
(9144)
Box Quantity - 10
5 bags containing 2 pieces per bag
(2032)
(3048)
(4572)
(6096)
(9144)
Length
in.
mm
in.
mm
in.
mm
BKYT12-063-40K
BKYT12-063-80K
BKYT12-063-120K
BKYT12-063-180K
BKYT12-063-240K
BKYT12-063-360K
12
12
12
12
12
12
(305)
1/16
(1.6)
(1016)
(305)
1/16
(1.6)
(305)
1/16
(1.6)
(305)
1/16
(1.6)
(305)
1/16
(1.6)
(305)
1/16
(1.6)
40
80
120
180
240
360
BKYT18-063-40K
BKYT18-063-80K
BKYT18-063-120K
BKYT18-063-180K
BKYT18-063-240K
BKYT18-063-360K
18
18
18
18
18
18
(457)
1/16
(1.6)
(1016)
(457)
1/16
(1.6)
(457)
1/16
(1.6)
(457)
1/16
(1.6)
(457)
1/16
(1.6)
(457)
1/16
(1.6)
40
80
120
180
240
360
BKYT30-063-40K
BKYT30-063-80K
BKYT30-063-120K
BKYT30-063-180K
BKYT30-063-240K
BKYT30-063-360K
30
30
30
30
30
30
(762)
1/16
(1.6)
(762)
(1.6)
(762)
1/16
(1.6)
(762)
1/16
(1.6)
(762)
1/16
(1.6)
(762)
1/16
(1.6)
40
80
120
180
240
360
(1016)
1/16
New
(2032)
(3048)
(4572)
(6096)
(9144)
(2032)
(3048)
(4572)
(6096)
(9144)
Box Quantity - 10
5 bags containing 2 pieces per bag
(2032)
(3048)
(4572)
(6096)
(9144)
Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp.
Available in lengths of 40, 80, 120, 180, 240, and 360.
= Stock item, lead time 2 - 3 working days
67
Part No.
KwikWire Hardware
Bolt Termination
Thread
Size
Part No.
New
Box Quantity - 20
5 bags containing 4 pieces per bag
Length
in.
mm
in.
mm
BKB25-063-40
1/4-20
1/16
(1.6)
40
(1016)
BKB25-063-80
1/4-20
1/16
(1.6)
80
(2032)
BKB25-063-120
1/4-20
1/16
(1.6)
120
(3048)
BKB25-063-180
1/4-20
1/16
(1.6)
180
(4572)
BKB25-063-240
1/4-20
1/16
(1.6)
240
(6096)
BKB25-063-360
1/4-20
1/16
(1.6)
360
(9144)
BKB38-094-40
3/8-16
3/32
(2.3)
40
(1016)
BKB38-094-80
3/8-16
3/32
(2.3)
80
(2032)
BKB38-094-120
3/8-16
3/32
(2.3)
120
(3048)
BKB38-094-180
3/8-16
3/32
(2.3)
180
(4572)
BKB38-094-240
3/8-16
3/32
(2.3)
240
(6096)
BKB38-094-360
3/8-16
3/32
(2.3)
360
(9144)
Ideal for use with ARS, ARC, ADI, ACPW, or ACPD anchors.
Available as a wire rope with bolt termination only or as a ready-to-use kit with a BKC100 clamp.
Available in lengths of 40, 80, 120, 180, 240, and 360.
Available in single, double (Y), and triple leg (3) styles
All (Y) and triple (3) styles are non-stock, consult Cooper B-Line for lead times
68
KwikWire Hardware
Bolt Termination Kits
Part No.
Length
in.
mm
in.
mm
BKB25-063-40K
1/4-20
1/16
(1.6)
40
(1016)
BKB25-063-80K
1/4-20
1/16
(1.6)
80
(2032)
BKB25-063-120K
1/4-20
1/16
(1.6)
120
(3048)
BKB25-063-180K
1/4-20
1/16
(1.6)
180
(4572)
BKB25-063-240K
1/4-20
1/16
(1.6)
240
(6096)
BKB25-063-360K
1/4-20
1/16
(1.6)
360
(9144)
BKB38-094-40K
3/8-16
3/32
(2.3)
40
(1016)
BKB38-094-80K
3/8-16
3/32
(2.3)
80
(2032)
BKB38-094-120K
3/8-16
3/32
(2.3)
120
(3048)
BKB38-094-180K
3/8-16
3/32
(2.3)
180
(4572)
BKB38-094-240K
3/8-16
3/32
(2.3)
240
(6096)
BKB38-094-360K
3/8-16
3/32
(2.3)
360
(9144)
New
Box Quantity - 20
5 bags containing 4 pieces per bag
Ideal for use with ARS, ARC, ADI, ACPW, or ACPD anchors.
Available as a wire rope with bolt termination only or as a ready-to-use kit with a BKC100 clamp.
Available in lengths of 40, 80, 120, 180, 240, and 360.
Available in single, double (Y), and triple (3) styles
All double (Y) and triple (3) styles are non-stock, consult Cooper B-Line for lead times
69
Thread
Size
KwikWire Hardware
Angle Bracket Termination
New
Length
in.
mm
in.
mm
BKA-063-40
1/16
(1.6)
40
(1016)
BKA-063-80
1/16
(1.6)
80
(2032)
BKA-063-120
1/16
(1.6)
120
(3048)
BKA-063-180
1/16
(1.6)
180
(4572)
BKA-063-240
1/16
(1.6)
240
(6096)
BKA-063-360
1/16
(1.6)
360
(9144)
Box Quantity - 20
5 bags containing 4 pieces per bag
New
Length
Part No.
in.
mm
in.
mm
BKA-063-40K
1/16
(1.6)
40
(1016)
BKA-063-80K
1/16
(1.6)
80
(2032)
BKA-063-120K
1/16
(1.6)
120
(3048)
BKA-063-180K
1/16
(1.6)
180
(4572)
BKA-063-240K
1/16
(1.6)
240
(6096)
BKA-063-360K
1/16
(1.6)
360
(9144)
Box Quantity - 20
5 bags containing 4 pieces per bag
Available as a wire rope with angle bracket termination only or as a ready-to-use kit with a BKC100 clamp.
Available in lengths of 40, 80, 120, 180, 240, and 360.
70
Hardware - Notes
71
Fittings
This section offers a full selection of fittings and
accessories to complete Cooper B-Lines metal
framing system. Fittings are made from hot
rolled, pickled and oiled plate or strip steel in
accordance with ASTM A1018 33,000 PSI min.
yield, unless noted.
Dimensions
The following dimensions apply to all fittings
except as noted:
Hole Spacing 17/8
(47.6 mm) on center
Hole Spacing
13/16 (20.6 mm)
from end
Width
15/8 (41.3 mm)
Finish
Plain
ZN
Electro-Plated Zinc
GRN
HDG
SS4
SS6
AL
Dura-Green
Hot-Dipped Galvanized
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum
Specification
ASTM A1018
33,000 PSI min. yield
ASTM B633 SC3 Type III
or ASTM A653
ASTM A123
ASTM A240
ASTM A240
ASTM B209
Load Data
The load data published includes safety factor of 2.5 when used with 12 ga. (2.6) channel
(safety factor = ratio of ultimate load to the design load).
Use 1/2-13 x 7/8 hex head cap screws and 1/2-13 (N225 or TN225) channel nuts for the rated results.
1/4-20
5/16-18
3/8-16
1/2-13
Foot/Lbs.
11
19
50
Nm
15
26
68
Strut Fittings
Hardware
Nuts and bolts are not included with the fittings and must be ordered separately, unless noted.
Pre-Assembled Fittings
Some fittings are available with hex head cap screws and channel nuts pre-assembled.
These fittings and finishes will be flagged using the following symbol.
ZN
PA
Metric
Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in millimeters.
72
GRN
SQUARE WASHER
Part
No.
B200
B201
B202
B202-1
B202-2
15/8
(41.3)
Hole Size
B129
(A)
3/8
(9.5)
7/16
(11.1)
9/16
11/16
(14.2)
13/16
(20.6)
(17.4)
Bolt
5/16
3/8
1/2
5/8
3/4
Size
(7.9)
(9.5)
(12.7)
(15.9)
(19.0)
B200D-B202-2D
Part
No.
B200D
B201D
B202D
B202-1D
B202-2D
15/8
(41.3)
Hole Size
Wt./C
Lbs.
kg
18
18
17
16
15
(8.1)
(8.1)
PA
ZN
GRN
(7.7)
(7.2)
31/2
(6.8)
(88.9)
Wt./C
A
(A)
3/8
(9.5)
7/16
(11.1)
9/16
(14.2)
11/16 (17.4)
13/16 (20.6)
Bolt
5/16
3/8
1/2
5/8
3/4
Size
(7.9)
(9.5)
(12.7)
(15.9)
(19.0)
Lbs.
kg
18
18
17
16
15
(8.1)
(8.1)
(7.7)
(7.2)
(6.8)
B340
B528
B141
PA
15/16
15/8
(41.3)
ZN
GRN
21/2
(63.5)
53/8
(136.5)
(33.3)
31/4
(82.5)
45/8
(117.5)
B557
B341
B342
PA
47/8
ZN
GRN
(123.8)
71/4
15/8
Strut Fittings
(184.1)
91/8
(231.8)
15/8
(41.3)
(41.3)
73
PA
Preassembled fitting.
B139
B504
45/8
(117.5)
61/2
(165.1)
3
(76.2)
17/8
15/8
(41.3)
31/2
(88.9)
31/4
(82.5)
(76.2)
(47.6)
B140
B143
B133
PA
ZN
GRN
PA
ZN
GRN
31/2
PA
31/2
(88.9)
ZN
GRN
31/2
(88.9)
(88.9)
53/8
(136.5)
31/2
(88.9)
53/8
(136.5)
B132
B135
B142
PA
ZN
GRN
PA
53/8
Strut Fittings
(136.5)
ZN
GRN
31/2
(88.9)
31/2
(88.9)
31/2
(88.9)
53/8
(136.5)
PA
Preassembled fitting.
53/8
(136.5)
74
B556
B337
75/8
25/16
(58.7)
(193.7)
13
5 /16
(147.6)
31/2
53/8
(25.4)
(88.9)
(136.5)
75/8
53/8
(136.5)
(193.7)
31/2
(88.9)
31/2
(88.9)
1
(25.4)
B432
B136
B532
31/2
(88.9)
31/2
(88.9)
53/8
(136.5)
53/8
(136.5)
53/8
(136.5)
53/8
(136.5)
B339
B568
B334
31/2
(88.9)
91/8
(231.8)
91/8
(231.8)
31/2
(88.9)
53/8
(136.5)
75
Strut Fittings
91/8
(231.8)
90 Angle Fittings
B420-378
B420-578
B420-778
17/8
(47.6)
17/8
17/8
(47.6)
(47.6)
77/8
(200.0)
57/8
(149.2)
37/8
(98.4)
B420-978
B101
B230
PA
ZN
GRN
PA
15/8
ZN
GRN
17/8
(47.6)
(41.3)
17/8
(47.6)
97/8
(250.8)
21/16
(52.4)
25/16
(58.7)
B231
B359
B360
PA
ZN
GRN
Strut Fittings
31/2
(88.9)
(76.2)
21/4
(57.1)
21/4
(57.1)
PA
Preassembled fitting.
17/8
(47.6)
76
17/8
(47.6)
90 Angle Fittings
B361
B102
B103
Standard finishes: ZN, GRN, HDG, SS4 Standard finishes: ZN, GRN, HDG, SS4
Wt./C 56 Lbs. (25.4 kg)
Wt./C 56 Lbs. (25.4 kg)
PA
ZN
GRN
ZN
GRN
PA
15/8
(41.3)
31/2
(88.9)
(101.6)
41/8
(104.8)
17/8
(47.6)
21/4
(57.1)
B232
B374
B529
Standard finishes: ZN, GRN, HDG, SS4 Standard finishes: ZN, GRN, HDG
Wt./C 56 Lbs. (25.4 kg)
Wt./C 56 Lbs. (25.4 kg)
PA
ZN
GRN
PA
ZN
GRN
21/16
(52.4)
15/16
(76.2)
(33.3)
17/8
(47.6)
47/8
(123.8)
315/16
33/4
(95.2)
(100.0)
15/16
(33.3)
21/2
(63.5)
B104
B115
B558
PA
ZN
GRN
PA
ZN
GRN
15/8
(41.3)
33/4
(95.2)
31/2
(88.9)
Strut Fittings
21/4
(57.1)
41/8
(104.8)
315/16
(100.0)
15/8
(41.3)
77
31/4
(82.5)
PA
Preassembled fitting.
90 Angle Fittings
B235R
B235L
B236R
31/4
(82.5)
17/8
(47.6)
31/4
(82.5)
21/16
(52.4)
17/8
(47.6)
17/8
(47.6)
21/16
21/16
(52.4)
(52.4)
31/2
(88.9)
B236L
B237
B357
47/8
(123.8)
17/8
31/2
(47.6)
(88.9)
21/16
(50.8)
(52.4)
53/8
(136.5)
21/16
Strut Fittings
(52.4)
B238R
B238L
B239
21/16
21/16
(52.4)
(52.4)
21/16
(52.4)
33/4
(95.2)
31/2
31/2
(88.9)
(88.9)
33/4
(95.2)
78
53/8
(136.5)
31/2
(88.9)
90 Angle Fittings
B844
B844W
B888W
UNIVERSAL SHELF BRACKET Standard finishes: ZN, GRN, HDG, SS4 WELDED
(101.6)
(101.6)
513/16
(147.6)
Welded
Corner
(101.6)
(101.6)
17/8
(47.6)
17/8
(47.6)
53/8
(136.5)
17/8
(47.6)
B234R
B234L
B134R
31/2
15/8
(88.9)
31/2
(88.9)
315/16
15/8
(41.3)
(41.3)
(100.0)
31/2
(88.9)
43/16
(106.3)
43/16
(106.3)
17/8
(47.6)
B134L
B125
B118
315/16
31/2
(88.9)
31/2
(88.9)
31/2
15/8
(88.9)
(41.3)
25/16
(58.7)
17/8
(47.6)
79
15/8
(41.3)
41/8
(104.8)
Strut Fittings
(100.0)
90 Angle Fittings
B485
B533
B126
17/8
(47.6)
15/8
(41.3)
31/2
(88.9)
41/8
(104.8)
53/8
31/2
(88.9)
21/4
(57.1)
53/8
(136.5)
(136.5)
315/16
(100.0)
B127
B503R
B503L
31/2
(88.9)
31/2
(88.9)
33/4
(95.2)
33/4
(95.2)
43/16 43/16
(106.3) (106.3)
43/16
(106.3)
53/8
(136.5)
53/8
(136.5)
15/8
(41.3)
15/8
(41.3)
B663
B371
B372
Strut Fittings
53/8
(136.5)
53/8
25/8
(66.7)
43/16
(106.3)
(136.5)
25/8
(66.7)
9/16
(14.3)
9/16
x 11/2
(14.3)
9/16
(14.3)
Slot
(38.1)
(50.8)
9/16
x 11/2
(14.3)
Slot
(38.1)
15/8
(41.3)
Reference page 72 for general fitting and standard finish specifications.
80
15/8
(41.3)
90 Angle Fittings
B496
B496-1
B371-2
23/8
(60.3)
23/8
(60.3)
15/16
47/8
67/8
(33.3)
9/16
(123.8)
(174.6)
9/16
x 29/16
(14.3)
Slot
(65.1)
9/16
17/8
17/8
(47.6)
(47.6)
(14.3)
x 29/16
(14.3)
x 11/2
Slot
(38.1)
25/8
(66.7)
Slot
(65.1)
37/8
(98.4)
B104SH
B461
B112
31/2
31/2
(88.9)
(88.9)
21/4
(57.1)
9/16
1/2
(12.7)
13/32
(10.3)
31/2
(88.9)
9/16
x 29/16
(14.3)
Slot
(65.1)
41/8
(104.8)
9/16
x 11/2
(14.3)
Slot -(2)
(38.1)
33/4
(95.2)
4
(101.6)
29/16 Slot
(14.3)
(65.1)
65/8
(168.3)
B113
B109S
B521
x 11/2
(14.3)
Slot -(2)
(38.1)
33/4
5/16-18 Tapped
17/8
(95.2)
1/2
(12.7)
17/8
(47.6)
(47.6)
6
(152.4)
85/8
(219.1)
15/8
(41.3)
17/8
2
(50.8)
(47.6)
81
Strut Fittings
9/16
Angular Fittings
B147-B152
B243-B253
23/8
(60.3)
11/16
(27.0)
Part
No.
B147
B148
B149
B150
B151
B152
821/2
Wt./C
Lbs.
75
671/2
60
521/2
371/2
31/4
A
kg
(82.5)
11/16
(27.0)
63 (28.6)
B162-B165
(27.0)
35/16
(84.1)
B162
B163
B164
B165
30
221/2
15
71/2
Wt./C
kg
21/16
(52.4)
(26.7)
B154
TWO HOLE OPEN ANGLE
Standard finishes: ZN, GRN, SS4
Wt./C 58 Lbs. (26.3 kg)
Strut Fittings
11/16
(27.0)
59
15
221/2
30
371/2
45
521/2
60
671/2
75
821/2
kg
311/16
(93.6)
77
(34.9)
(88.9)
Part
No.
B322
B323
B324
B325
B326
B327
B328
B329
B330
B331
B332
71/2
Wt./C
Lbs.
15
221/2
30
371/2
45
521/2
60
671/2
75
821/2
kg
A
13/4
(44.4)
15/8
(41.3)
35
(15.9)
B522
B488
THREE HOLE 95
OPEN ANGLE FITTING
17/8
(47.6)
3
(76.2)
5
5
11/16
(27.0)
25/16
45
11/16
(58.7)
31/2
11/16
Lbs.
B243
B244
B245
B246
B247
B248
B249
B250
B251
B252
B253
71/2
Wt./C
Lbs.
B322-B332
Part
No.
Part
No.
35/8
(92.1)
31/4
(82.5)
(27.0)
82
Angular Fittings
B156 - B161
B155
PA
ZN
GRN
13/16
13/16
Wt./C
(20.6)
Part
No.
B156
B157
B158
B159
B160
B161
821/2
13/16
75
671/2
60
521/2
371/2
(20.6)
Lbs.
56
kg
(25.4)
31/2
(88.9)
(20.6)
33/16
(80.9)
45
A
13/16
21/2
(63.5)
(20.6)
21/2
(63.5)
B363 - B369
B335-2 SERIES
(127.0)
Hole Size
This Hole Only
Part
No.
B363
B364
B365
B366
B367
B368
B369
821/2
75
671/2
60
521/2
45
371/2
411/16
Wt./C
Lbs.
(119.1)
kg
43/8
(111.1)
213/16
(71.4)
95
(43.1)
Part No.
& Size
B335-2-3/8
B335-2-1/2
B335-2-5/8
B335-2-3/4
Hole Size
H
7/16
(11.1)
9/16
(14.3)
11/16 (17.4)
13/16 (20.6)
Wt./C
Lbs.
kg
96
94
92
90
(43.2)
(42.3)
(41.4)
(40.5)
B335
B335V
B335-1
FOUR HOLE
ADJUSTABLE HINGE
411/16
(119.1)
Hole Size
H
9/16 (14.3)
11/16 (17.4)
13/16 (20.6)
Wt./C
Lbs.
kg
53
54
55
(24.1)
(24.5)
(24.9)
213/16
(71.4)
Strut Fittings
Part No.
& Size
B335V-1/2
B335V-5/8
B335V-3/4
213/16
(71.4)
411/16
411/16
(119.1)
(119.1)
83
PA
Preassembled fitting.
Angular Fittings
B634
B635
13/16
13/16
(20.6)
(20.6)
15/8
(41.3)
15/8
(41.3)
30
MIN.
17/8
(47.6)
17/8
(47.6)
33/4
(95.2)
53/8
33/4
(95.2)
53/8
(136.5)
(136.5)
B129
B650 SERIES
SEISMIC RETROFIT BRACKET
OSHPD approved for Seismic Zone 4.
Available for 3/8, 1/2, 5/8, and 3/4 threaded rods.
Allows installer to easily brace existing trapeze supports.
Includes: Bracket, B129 plate, & key. Hardware sold separately.
Standard finish: ZN, GRN
ATR
Bracket
Key
Part No.
& Size
For
Rod Size
B650-3/8
3/8
B650-1/2
B650-5/8
B650-3/4
1/2
5/8
3/4
TL
LL
Wt./C
Lbs.
kN
Lbs.
kN
Lbs.
kg
1100
1500
1500
1500
(4.89)
1100
1500
1500
1500
(4.89)
92
97
95
107
(41.4)
(6.67)
(6.67)
(6.67)
(6.67)
(6.67)
(6.67)
Longitudinal
Load (LL)
(43.6)
(42.7)
Transverse
Load (TL)
(48.5)
B633
ADJUSTABLE SEISMIC HINGE FITTING
Strut Fittings
B633-1/2
31/2
B633-5/8
B633-3/4
B633-7/8
B633-1
B633-11/8
B633-11/4
31/2
31/2
39/16
39/16
39/16
37/8
(82.5)
15/8
(82.5)
15/8
15/8
2
2
2
21/4
(82.5)
(90.5)
(90.5)
(90.5)
(98.4)
Hole Size
H
(41.3)
9/16
(14.3)
(41.3)
11/16
(17.4)
(41.3)
13/16
(20.6)
(50.8)
15/16
(23.8)
11/16
(50.8) 13/16
(57.1) 15/16
(27.0)
(50.8)
(30.2)
(33.3)
33/4
(95.2)
B
15/8
(41.3)
Wt./C
Lbs.
kg
92
97
95
107
120
104
114
(41.4)
(43.6)
(42.7)
(48.5)
(54.0)
(47.2)
(51.7)
84
Braces
B261 - TWO HOLE 45 KNEE BRACE
Standard finishes: ZN, GRN
Design load determined by testing using a B335 hinged corner connection.
Load ratings are for brace members only. Do not exceed allowable beam
or column loads for strut channels.
Safety Factor of 3
Design Load
Part
No.
(A)
B261-8
B261-12
B261-16
B261-18
B261-24
B261-36
8
12
165/8
18
24
36
(203.2)
(304.8)
(422.3)
(457.2)
(609.6)
(914.4)
(B)
73/8 (187.3)
101/8 (257.2)
133/8 (339.7)
147/16 (366.7)
1811/16 (474.7)
273/16 (690.6)
kN
Lbs.
kg
1500
1020
530
450
250
110
(6.67)
119
165
218
234
303
441
(54.0)
(2.36)
(2.00)
(1.11)
(.49)
Design Load
Wt./C
Lbs.
(4.54)
15/8
(41.3)
(74.8)
(98.9)
B
A
45
15/8
(41.3)
(106.1)
(137.4)
(200.0)
Part
No.
B631-18
B631-24
B631-30
B631-36
B631-42
B631-48
B631-54
B631-60
B631-72
B631-84
B631-96
18
24
30
36
42
48
54
60
72
84
96
(A)
(457.2)
(609.6)
(762.0)
(914.4)
(1066.8)
(1219.2)
(1371.6)
(1524.0)
(1828.8)
(2133.6)
(2438.4)
kN
Lbs.
kg
1500
1500
1500
1500
1230
940
740
600
420
310
240
(6.67)
145
186
225
266
307
348
389
430
508
589
669
(65.8)
(6.67)
(6.67)
(5.47)
(4.18)
(3.29)
(2.67)
(1.87)
(1.38)
(1.07)
Wt./C
Lbs.
(6.67)
Design Load
(84.4)
(102.0)
(120.6)
(139.2)
(157.8)
(176.4)
(195.0)
(230.4)
13/4
(44.4)
(267.2)
(303.5)
(A)
Lbs.
kg
B632-18
B632-24
B632-30
B632-36
B632-42
B632-48
B632-54
B632-60
B632-72
B632-84
B632-96
18
24
30
36
42
48
54
60
72
84
96
(457.2)
133
174
215
256
295
335
380
420
500
585
670
(60.3)
(609.6)
(762.0)
(914.4)
(1066.8)
(1219.2)
(1371.6)
(1524.0)
(1828.8)
(2133.6)
(2438.4)
13/4
(44.4)
(78.9)
(97.5)
(116.1)
(133.8)
(151.9)
(172.3)
(190.5)
(226.8)
(265.3)
(303.9)
85
Strut Fittings
Part
No.
Clevis Fittings
B169
B168
B167
PA
1/4
(6.3)
31/2
(88.9)
GRN
71/4
(184.1)
53/8
(136.5)
1/4
(6.3)
1/4
(6.3)
B170
B171
B172
PA
1/4
31/2
(88.9)
ZN
GRN
53/8
(136.5)
(6.3)
71/4
(184.1)
1/4
(6.3)
1/4
(6.3)
B172-12
B172-22A
B450
U-WASHER
PA
GRN
Hole Size
15/32
Strut Fittings
(11.9)
11 Gauge (3.1)
Part No.
& Size
71/4
71/4
(184.1)
(184.1)
1/4
(6.3)
1/4
(6.3)
PA
Preassembled fitting.
Hole Size
H
B450-1/4
5/16
B450-3/8
B450-1/2
B450-5/8
B450-3/4
7/16 (11.1)
9/16 (14.3)
86
15/8
(41.3)
(7.9)
11/16 (17.4)
13/16 (20.6)
Wt./C
Lbs.
kg
14
14
13
13
13
(6.3)
(6.3)
(5.8)
(5.8)
(5.8)
U Fittings
B527
B116-52
B116-42
1/2
(12.7)
13/16
(20.6)
(25.4)
57/16
(138.1)
57/16
(138.1)
55/16
(134.9)
B116-32
B116-32A
B116-12
23/4
(69.8)
13/8
27/16
(61.9)
(34.9)
57/16
(138.1)
57/16
(138.1)
57/16
(138.1)
B107
B107-22A
B588
PA
ZN
GRN
15/8
(41.3)
57/16
(138.1)
47/8
(123.8)
Strut Fittings
31/4
(82.5)
57/16
(138.1)
57/16
(138.1)
87
PA
Preassembled fitting.
U Fittings
B412
B107S
B596
THREE HOLE
OFFSET U-SUPPORT
57/16
(138.1)
33/4
(95.2)
13/16
(20.6)
13/8
1 (34.9)
17/8
(25.4)
(47.6)
13/4
(44.4)
21/4
(57.1)
15/8
(41.3)
15/8
(41.3)
B578
B594
B266
17/8
35/16
121/32
(84.1)
(42.1)
(47.6)
311/16
(93.6)
3/4
(19.0)
15/8
(41.3)
13/32
(10.3)
9/32 (7.1)
Dia. 3 Holes
15/8
(41.3)
71/32
(178.6)
111/16
35/16
71/16
(42.8)
(84.1)
(179.4)
B425
B581
B519
111/16
Strut Fittings
(42.9)
31/2
(88.9)
31/2
(88.9)
15/8
(41.3)
31/2
(88.9)
31/2
(88.9)
15/8
(41.3)
57/16
(138.1)
71/16
(179.4)
513/32
(137.3)
88
U Fittings
B333
B451
9/16
x 11/2
(14.3)
Slots-(2)
(38.1)
9/16
x 11/2
(14.3)
Slots-(2)
(38.1)
15/8
(41.3)
B
Part
No.
Wt./C
A
B333-1
B333-2
B333-3
(A)
(B)
(C)
Lbs.
27/8
(73.0) 103
33/8 (85.7) 115
45/16 (109.5) 135
Part
No.
kg
B451-1
B451-2
B451-3
(46.7)
(52.1)
(61.2)
B408
Wt./C
A
(A)
7 /2 (190.5)
81/2 (215.9)
103/8 (263.5)
Lbs.
kg
137
156
172
(62.1)
(70.7)
(78.0)
B358
1/2
(12.7)
13/16
(20.6)
9/16 (14.3) DIA.
2 HOLES
17/8
(47.6)
17/8
(47.6)
Part
No.
Wt./C
A
B408-1
B408-2
B408-3
(A)
Lbs.
213/32 (61.1) 58
325/32 (96.0) 76
43/4 (762.0) 88
kg
(26.3)
13/16
(20.6)
(34.5)
(39.9)
Part
No.
Wt./C
B358-4
B358-5
B358-6
B358-7
B358-8
4
5
6
7
8
(A)
Lbs.
89
93
(152.4) 106
(177.8) 118
(203.2) 132
kg
(101.6)
(40.3)
(127.0)
(42.2)
(48.1)
13/16
(53.5)
(20.6)
(59.9)
B173
B595
B405
THREE HOLE
SUSPENSION CLEVIS
Standard finishes: ZN, GRN
Wt./C 75 Lbs. (34.0 kg)
37/16
17/8
(87.3)
(47.6)
129/32
35/16
(84.1)
121/32
(42.0)
(48.4)
35/16
121/32
(42.0)
(84.1)
17/8
(47.6)
Reference page 72 for general fitting and standard finish specifications.
89
Strut Fittings
17/8
(47.6)
U Fittings
B398-1
B415
17/8
(47.6)
111/16
(42.9)
23/32
(53.2)
11/16
(27.0)
15/8
(41.3)
111/16
325/32
(42.9)
(96.0)
1/2
(12.7)
11/16
(27.0)
B400
B400-1
B400-2
THREE STUD
RING CONNECTION
ONE STUD
RING CONNECTION
ONE STUD
RING CONNECTION
111/16
23/16
(42.9)
111/16
(42.9)
17/8
17/8
(47.6)
(47.6)
(42.9)
(55.6)
Strut Fittings
111/16
B400-3
B400-4
B536
TWO STUD
RING CONNECTION
TWO STUD
RING CONNECTION
TAPPED U-SUPPORT
Standard finishes: ZN
Wt./C 87 Lbs. (39.4 kg)
15/8
(41.3)
111/16
(42.9)
111/16
(42.9)
111/16
(42.9)
111/16
(42.9)
59/16
(141.3)
Tapped 5/16-18
(2) Holes
90
Z Fittings
B526
B106-52
B106-42
TWO HOLE
OFFSET Z-SUPPORT
TWO HOLE
Z-SUPPORT FOR B52
TWO HOLE
Z-SUPPORT FOR B42
1/4
(6.3)
315/32
13/16
(20.6)
(25.4)
(88.1)
15/8
31/2
(88.9)
31/2
(88.9)
(41.3)
B106-32
B106-12
B105
TWO HOLE
Z-SUPPORT FOR B32
TWO HOLE
Z-SUPPORT FOR B12
THREE HOLE
Z-SUPPORT FOR B22
15/8
(41.3)
27/16
13/8
(34.9)
(61.9)
31/2
31/2
(88.9)
31/2
(88.9)
(88.9)
B110
B586
B108
THREE HOLE
Z-SUPPORT FOR B11
TWO HOLE
Z-SUPPORT
TWO HOLE
OFFSET Z-SUPPORT
31/2
(88.9)
31/2
(88.9)
47/8
15/8
(123.8)
Strut Fittings
31/2
(88.9)
21/8
(54.0)
(41.3)
31/2
(88.9)
15/8
(41.3)
Reference page 72 for general fitting and standard finish specifications.
91
Z Fittings
B387
B407
15/8
31/2
(88.9)
(41.3)
15/8
(41.3)
31/2
(88.9)
1/2
(12.7)
Part No.
B387
B387-1
B387-2
(A)
Lbs.
43/4 (120.6)
325/32 (96.0)
213/32 (61.1)
kg
89 (40.3)
78 (35.4)
62 (28.1)
Wt./C
Part No.
B407-4
4
B407-5
5
B407-6
6
B407-7
7
B407-8
8
B407-95/8 95/8
Wt./C
(A)
Lbs.
kg
(101.6)
77
95
98
105
120
138
(34.9)
(127.0)
(152.4)
(177.8)
(203.2)
(244.5)
(43.1)
(44.4)
(47.6)
(54.4)
(62.6)
B534
B535
B111
TAPPED Z-SUPPORT
TAPPED Z-SUPPORT
Standard finishes: ZN
Wt./C 51 Lbs. (23.1 kg)
Standard finishes: ZN
Wt./C 50 Lbs. (22.7 kg)
15/8
15/8
15/8
(41.3)
31/2
(88.9)
15/8
(41.3)
(41.3)
(41.3)
15/8
(41.3)
15/8
15/8
31/2
(88.9)
(41.3)
(41.3)
5/16-18
5/16-18
Tapped
Holes (2)
Tapped Hole
Strut Fittings
15/8
(41.3)
B538
B539
Standard finishes: ZN
Wt./C 71 Lbs. (32.2 kg)
Standard finishes: ZN
Wt./C 68 Lbs. (30.8 kg)
15/8
(41.3)
17/8
(47.6)
5/16-18 Tapped
15/8
Holes (4)
(41.3)
17/8
(47.6)
31/2
(88.9)
31/2
(88.9)
5/16-18 Tapped
Holes (2)
92
Z Fittings
B410-52
B410-32
B410-22
CHANNEL HANGER
BRACKET FOR B52
CHANNEL HANGER
BRACKET FOR B32
CHANNEL HANGER
BRACKET FOR B22
13/16
9/32 (7.1)
13/16
13/16
(20.6)
(20.6)
(20.6)
Dia. Hole
9/32 (7.1)
9/32 (7.1)
Dia. Hole
13/16
(20.6)
Dia. Hole
13/8
15/8
(34.9)
(41.3)
B410-12
B410-11
B580
CHANNEL HANGER
BRACKET FOR B12
CHANNEL HANGER
BRACKET FOR B11
FIVE HOLE
GUSSETTED Z-SUPPORT
9/32 (7.1)
13/16
Dia. Hole
(20.6)
31/2
(88.9)
13/16
(20.6)
31/2
(88.9)
9/32 (7.1)
Dia. Hole
31/4
(82.5)
27/16
(61.9)
15/8
(41.3)
B515
B428
ADJUSTABLE OFFSET
GUSSETTED Z-SUPPORT
15/32
31/2
(88.9)
9/16
37/8
(98.4)
53/4
(146.0)
(47.6)
x 29/16
(14.3)
Slots
Strut Fittings
(11.9)
53/4
(146.0)
17/8
(65.1)
17/8
(47.6)
31/2
(88.9)
93
Wing Fittings
B267R
B267L
B270R
111/16
21/16
21/16
(52.4)
(52.4)
(42.8)
21/16
(52.4)
15/8
(41.3)
15/8
(41.3)
31/2
(88.9)
31/2
(88.9)
313/16
(96.8)
B270L
B268R
B268L
111/16
(42.8)
21/16
315/16
(52.4)
15/8
315/16
(100.0)
(100.0)
(41.3)
313/16
15/8
(41.3)
31/2
(88.9)
(96.8)
31/2
(88.9)
B269R
B269L
B119
31/2
(88.9)
Strut Fittings
31/2
(88.9)
315/16
315/16
(100.0)
(100.0)
21/16
15/8
(52.4)
(41.3)
53/8
(136.5)
53/8
(136.5)
94
31/2
(88.9)
Wing Fittings
B120
B121
B271
57/16
(138.1)
15/8
31/2
(88.9)
315/16
(41.3)
(100.0)
315/16
21/16
(100.0)
(52.4)
15/8
(41.3)
31/2
53/8
(88.9)
(136.5)
111/16
(42.8)
B272
B273
B122
57/16
93/16
(138.1)
(233.4)
57/16
(138.1)
315/16
15/8
315/16
(100.0)
31/2
(41.3)
21/16
(100.0)
(52.4)
(88.9)
15/8
111/16
111/16
111/16
(42.8)
(42.8)
(42.8)
(41.3)
B123
B124
B276
57/16
(138.1)
93/16
(233.4)
31/2
(88.9)
315/16
315/16
(100.0)
15/8
(100.0)
(41.3)
111/16
(42.8)
111/16
4
(101.6)
(42.8)
95
Strut Fittings
4
(101.6)
Wing Fittings
B274R
B274L
B495
511/16
93/16
(233.4)
521/32
(144.5)
(143.7)
315/16
(100.0)
31/2
37/8
(98.4)
315/16
(100.0)
31/2
(88.9)
31/2
(88.9)
(88.9)
111/16
111/16
(42.8)
(42.8)
111/16
(42.8)
B277
B362
B571
93/16
(233.4)
53/8
(136.5)
4
(101.6)
315/16
31/2
315/16
(100.0)
(100.0)
31/2
(88.9)
(88.9)
15/8
(41.3)
111/16
(42.8)
4
(101.6)
B346R
Strut Fittings
B346L
53/8
(136.5)
31/2
(88.9)
31/2
(88.9)
96
53/8
(136.5)
Post Bases
B279
B279SQ
B279FL
111/16
(42.8)
3/4 (19.0)
Dia .4 Holes
111/16
(42.8)
6
(152.4)
111/16
3/4 (19.0)
Dia .4 Holes
15/8
(41.3)
(41.3)
41/4
(107.9)
41/4
(203.2)
(107.9)
(152.4)
(42.8)
15/8
61/4
(158.7)
(152.4)
(76.2)
(152.4)
15/8
(41.3)
(76.2)
B280
B280SQ
B280FL
111/16
3/4 (19.0)
Dia .4 Holes
111/16
(42.8)
111/16
(42.8)
3/4 (19.0)
Dia .2 Holes
3/4 (19.0)
Dia .4 Holes
31/2
31/2
(88.9)
(88.9)
(42.8)
(152.4)
6
6
41/4
(107.9)
41/4
(107.9)
(152.4)
(152.4)
61/4
31/2
(88.9)
(158.7)
(203.2)
(152.4)
(76.2)
(76.2)
B281A
B281ASQ
B281AFL
3/4 (19.0)
Dia .4 Holes
35/16
15/8
35/16
(41.3)
(84.1)
3/4 (19.0)
Dia .4 Holes
35/16
(84.1)
15/8
(41.3)
6
41/4
(152.4)
(107.9)
41/4
(107.9)
6
(152.4)
8
6
15/8
(41.3)
(158.7)
(203.2)
(152.4)
6
(152.4)
61/4
3
(76.2)
3
(76.2)
97
Strut Fittings
3/4 (19.0)
Dia .2 Holes
(84.1)
Post Bases
B281
B281SQ
B281FL
3/4 (19.0)
35/16
Dia. 4 Holes
(84.1)
35/16
31/2
(84.1)
(88.9)
3/4 (19.0)
3/4 (19.0)
Dia. 4 Holes
Dia. 2 Holes
35/16
(84.1)
31/2
(88.9)
31/2
(88.9)
(152.4)
41/4
6
(152.4)
41/4
(107.9)
(107.9) 6
(152.4)
6
(152.4)
61/4
(158.7)
(203.2)
(76.2)
(76.2)
B281M
B281MSQ
B570
39/16
(90.5)
3/4 (19.0)
111/16
Dia. 4 Holes
(42.8)
3/4 (19.0)
(88.9)
Dia. 4 Holes
31/2
315/32
(88.9)
(87.9)
(152.4)
(152.4)
41/4
(107.9)
41/4
(107.9)
6
(152.4)
(152.4)
1/4
(6.3)
6
(152.4)
(152.4)
3/4 (19.0)
Dia. 4 Holes
(76.2)
(76.2)
B570A
B278
Strut Fittings
15/8
(41.3)
31/2
31/2
(88.9)
7/16
(11.1) Dia.
4 Holes
B300
B585
POST BASE FOR B22A
POST BASE
15/8
(101.6)
(41.3)
13/4
(44.4)
31/2
(88.9)
1/4
3/4
(19.0)
(6.3)
6
(152.4)
3
(76.2)
(152.4)
5
(127.0)
(127.0)
3/4 (19.0)
Dia. 4 Holes
15/8
5
31/2
31/16
(77.8)
(41.3)
(88.9)
98
7
(177.8)
3/8 (9.5)
Countersunk
To
3/4 (19.0)
Dia.
9/16
(14.4)
21/16
(52.4)
Brackets
B187 BRACKET
B188 BRACKET
21/4
(57.1)
11/16
(27.0)
11/16
21/4
(57.1)
(27.0)
(101.6)
(228.6)
4
(101.6)
12
(304.8)
B189 BRACKET
B541 BRACKET
11/16
11/16
(27.0)
21/4
(27.0)
21/4
(57.1)
(57.1)
(101.6)
(101.6)
15
101/2
(266.7)
(381.0)
11/16
11/16
(27.0)
(101.6)
(27.0)
9/16
x 3
Slot
(14.3) (76.2)
4
(101.6)
12
18
(304.8)
(457.2)
71/2
(190.5)
71/2
(190.5)
9/16 x 3 Slot
(14.3) (76.2)
(50.8)
2
(50.8)
99
Strut Fittings
Brackets
B191-24 24 (609.6) BRACKET
11/16
(27.0)
11/16
(27.0)
4
(101.6)
6
(152.4)
24
24
(609.6)
(609.6)
12
27/16
71/2
(61.9)
(190.5)
9/16
(304.8)
9/16 x 3 Slot
(14.3) (76.2)
x 3
Slot
(14.3) (76.2)
(50.8)
(50.8)
13/16
13/16
13/16
(30.1)
(30.1)
(30.1)
13/16
(30.1)
51/4
161/2
(133.3)
(152.4)
31/8
31/4
(82.5)
(152.4)
(419.1)
121/2
31/8
(317.5)
(79.4)
33/4
(95.2)
(79.4)
53/4
(146.0)
21/2
13/16
21/2
(63.5)
(30.1)
(63.5)
13/16
(30.1)
13/16
13/16
(30.1)
13/16
(30.1)
Strut Fittings
(30.1)
6
(152.4)
13/16
31/4
(82.5)
6
31/8
(79.4)
141/2
(152.4)
(368.3)
51/4
(133.3)
31/8
(79.4)
53/4
(63.5)
(469.9)
73/4
(196.8)
(146.0)
21/2
181/2
21/2
(63.5)
13/16
(30.1)
13/16
(30.1)
100
Brackets
B292 201/2 (520.7) BRACKET
B297
DOUBLE CHANNEL
BRACKET
(20.6)
(50.8)
3/8
61/4
(158.7)
13/16
(30.1)
13/16
(9.5)
13/16
(30.1)
45/8
(117.5)
71/4
(152.4)
(184.1)
31/8
(79.4)
201/2
Part
No.
B297-12
B297-18
B297-24
B297-30
B297-36
B297-42
(520.7)
73/4
(196.8)
21/2
(63.5)
13/16
(30.1)
B409
SINGLE CHANNEL BRACKET
Safety Factor of 2.5
Standard finishes: ZN, GRN, SS4
13/16
Uniform Load
A
12
18
24
30
36
42
(304.8)
(457.2)
(609.6)
(762.0)
(914.4)
(1066.8)
kN
Lbs.
kg
1660
1100
835
665
550
465
(7.37)
(4.88)
(3.71)
(2.95)
(2.44)
(2.06)
485
668
857
1040
1240
1440
(220.0)
(303.0)
(388.7)
(471.7)
(562.4)
(653.2)
B494
BRACED
SINGLE BRACKET
(38.1)
(20.6)
H
2
45/8
(117.5)
15/8
(41.3)
(50.8)
Wt./C
Lbs.
11/2
13/16
(20.6)
B22A
(101.6)
B22
(76.2)
Part
No.
B409-6
B409-9
B409-12
B409-14
B409-16
B409-18
B409-24
Uniform Load
A
6
9
12
14
16
18
24
Lbs.
1920
1280
960
800
(152.4)
(228.6)
(304.8)
(355.6)
(406.4)
(457.2)
(609.6)
730
640
480
kN
(8.54)
(5.69)
(4.27)
(3.56)
(3.25)
(2.84)
(2.13)
152
195
232
274
314
347
450
Dia. Holes
(50.8)
A
B
13/32
(50.8)
(25.4)
Mounting Hole
7/16 (11.1) Dia.
x 1 Slot
(10.3) (25.4)
kg
(68.9)
(88.4)
(105.2)
(124.3)
(142.4)
(157.4)
(204.1)
Part
No.
B174SH
B175SH
B176SH
B177SH
B178SH
B179SH
B180SH
B181SH
B182SH
B183SH
B184SH
B185SH
B186SH
B42
Uniform Load
L
H
83/4
83/4
83/4
111/4
111/4
16
16
12 (304.8)
18 (475.2)
24 (609.6)
30 (762.0)
36 (914.4)
42 (1066.8)
48 (1219.2)
Lbs.
(222.2) 1580
(222.2) 1000
(222.2) 996
(285.7) 924
(285.7) 864
(406.4) 580
(406.4) 500
kN
24
26
28
30
12
14
16
18
20
22
6
8
10
(609.6)
(660.4)
(711.2)
(762.0)
(304.8)
(355.6)
(406.4)
(457.2)
(508.0)
(558.8)
(152.4)
(203.2)
(254.0)
B
67/16
615/16
77/16
715/16
37/16
315/16
47/16
415/16
57/16
515/16
115/16
27/16
215/16
(163.5)
(176.2)
(188.9)
(201.6)
(87.3)
(100.0)
(112.7)
(125.4)
(138.1)
(150.8)
(49.2)
(61.9)
(74.6)
(165.1)
(217.3)
(324.8)
(420.5)
(496.7)
(635.0)
(684.9)
Wt./C
Lbs.
kN
Lbs.
kg
225
225
225
225
350
350
250
250
250
250
225
225
325
(1.00)
(1.00)
(1.00)
(1.00)
(1.55)
(1.55)
(1.11)
(1.11)
(1.11)
(1.11)
(1.00)
(1.00)
(1.44)
370
425
480
520
143
162
204
232
275
317
58
82
103
(167.8)
(192.8)
(217.7)
(235.9)
(64.8)
(73.5)
(92.5)
(105.2)
(124.7)
(143.8)
(26.3)
(37.2)
(46.7)
101
kg
(7.02) 364
(4.45) 479
(4.43) 716
(4.11) 927
(3.84) 1095
(2.58) 1400
(2.22) 1510
Uniform Load
A
Wt. /C
Lbs.
Strut Fittings
9/32 (7.1)
Part
No.
B494-12
B494-18
B494-24
B494-30
B494-36
B494-42
B494-48
Wt./C
Lbs.
B174SH-B186SH
Inside Brace on
B494-24 and Larger.
Brackets
B196
B198
13/16
CHANNEL
CLEVIS
BRACKET
(20.6)
13/16
(20.6)
31/2
(88.9)
A
35/8
(92.1)
B22
Part
No.
Uniform Load
B196-18
B196-24
18
24
(A)
(457.2)
(609.6)
B22
Wt./C
Lbs.
kN
Lbs.
kg
600
450
(2.67)
430
510
(195.0)
(2.00)
(231.3)
Part
No.
Uniform Load
B198-6
B198-12
6
12
(A)
(152.4)
(304.8)
B293
CHANNEL BRACKET
(20.6)
kN
Lbs.
kg
1600
800
(7.12)
185
284
(128.8)
(3.56)
(83.9)
13/16
B198A
13/16
Wt./C
Lbs.
(20.6)
31/2
(88.9)
11/2
(38.1)
31/2
(88.9)
A
A
B22
B22
Part
No.
Uniform Load
A
B198A-6
6
B198A-12 12
(A)
Lbs.
1600
(304.8) 800
(152.4)
B293A
CHANNEL BRACKET
Safety Factor of 2.5
Standard finishes:
ZN, GRN
Wt./C
kN
Lbs.
kg
(7.12)
185
284
(83.9)
(3.56)
(128.8)
(20.6)
11/2
(38.1)
31/2
Strut Fittings
Uniform Load
B293A-6
6
B293A-12 12
B293A-18 18
B293A-24 24
(A)
(152.4)
(304.8)
(457.2)
(609.6)
Lbs.
1200
600
400
300
Uniform Load
B293-6
B293-12
B293-18
B293-24
6
12
18
24
(A)
(152.4)
(304.8)
(457.2)
(609.6)
Lbs.
kN
1200
600
400
300
(5.34)
(2.67)
(1.78)
(1.33)
Wt./C
Lbs.
144
252
340
412
kg
(65.3)
(114.3)
(154.2)
(186.9)
kN
(5.34)
(2.67)
(1.78)
(1.33)
B22
63/8
(161.9)
B22
13/16
(88.9)
Part
No.
Part
No.
Wt./C
Lbs.
144
252
340
412
kg
(65.3)
23/16
(114.3)
(55.6)
(154.2)
33/4
(95.3)
(186.9)
102
B22
Brackets
B370
B195
B22
(100.0)
(54.0)
37/8
(98.4)
(203.2)
315/16
B22
21/8
B22A
B42
33/4
33/4
(95.2)
(95.2)
B440
B449-4, 8 & 12
CABLE SADDLE
BRACKET
13/16
(20.6)
(54.0)
B
A
37/8
(98.4)
2
(50.8)
B52
Part
No.
33/4
B449-18
41/2 (114.3)
81/2 (215.9)
23/8 (60.3)
23/8 (60.3)
B449-4
B449-8
B449-12 121/2 (317.5)
(95.2)
Uniform Load
A
Lbs.
kN
Wt./C
Lbs.
kg
B293PL
BRACKET PLATE ONLY
Standard finishes: ZN, GRN
Wt./C 46 Lbs. (20.8 kg)
13/16
2
(50.8)
11/2
(38.1)
4
(101.6)
31/2
(88.9)
18
120
13/16
(457.2)
(20.6)
11/4
(31.7)
103
Strut Fittings
(20.6)
Brackets
B816
B852S-W-D
Specify W = 8, 12, 16
Specify D = 6, 8, 10, 12, 16, 18, 24
13/16 (20.6mm) x 1 (25.4mm) banding slots for steel band
Standard finishes: ZN, HDG
(50.8)
61/2
(165.1)
23/8
(60.3)
21/8
(54.0)
9/16
(355.6)
(355.6)
725/32
(14.3)
14
14
(197.6)
(14.3)
(65.1)
W
D
11/16 x 1 Slot
(17.4) (25.4)
13/16 x 1 Slot
(20.6) (25.4)
B802D-W
B810-W
Specify W = 8, 12, 16
Standard finishes: ZN, HDG
Specify W = 8, 12, 16
13/16 (20.6mm) x 1 (25.6mm) banding slots for steel band
Standard finishes: ZN, HDG
Strut Fittings
95/8
(244.5)
W
725/32
(197.6)
104
13/16 x 1 Slot
(20.6) (25.4)
Brackets
B811-W
B812-*
121/32
(42.1)
13/32 (10.3) Dia.
13/16 (20.6) Dia.
27/16
725/32
(61.9)
(197.6)
13/16 x 1 Slot
(20.6) (25.4)
D
13/16
(20.6)
B809B-*
Specify D = 6, 8, 10, 12, 16, 18, 24
13/16 (20.6mm) x 1 (25.4mm) banding slots for steel band
Standard finishes: ZN, HDG
Part No.
725/32
mm
In.
mm
B809B-6
(152.4)
123/4
(323.9)
B809B-8
(203.2)
143/4
(374.7)
(254.0)
163/4
(425.5)
(304.8)
183/4
(476.2)
(577.8)
B809B-10
B809B-12
10
12
B809B-16
16
(406.4)
223/4
B809B-18
18
(457.2)
243/4
(628.6)
B809B-24
24
(609.6)
273/4
(704.8)
(197.6)
13/16 x 1 Slot
(20.6) (25.4)
105
Strut Fittings
In.
Miscellaneous Fittings
B214 R&L
B514 R&L
(76.2)
(76.2)
35/8
(92.1)
35/8
(92.1)
53/8
(136.5)
53/8
(136.5)
53/8
(136.5)
B214R
Right Hand
B214L
Left Hand
53/8
(136.5)
B514R
Right Hand
B514L
Left Hand
B475
B473
3
(76.2)
(76.2)
(228.6)
(228.6)
B474
B472
31/4
(82.5)
31/4
Strut Fittings
(82.5)
53/8
53/8
(136.5)
(136.5)
106
Miscellaneous Fittings
B664
B438
13/4
(44.4)
35/16
(84.1)
41/4
(107.9)
Holes 9/16(14.3)
31/2
(88.9)
13/4
(44.4)
325/32
213/16
(101.6)
(96.0)
(71.4)
B439
B411 SERIES
LADDER RUNGS
13/16
(20.6)
31/2
(88.9)
13/16
(20.6)
1/4
(6.3)
(101.6)
Part No.
2 I.D.
(A)
(304.8)
(381.0)
(457.2)
Wt./C
Lbs.
176
202
234
(91.6)
(106.1)
Design Load
(50.8)
(A)
(60.3)
(111.1)
(161.9)
(212.7)
(263.5)
B
6
8
10
12
14
(B)
(152.4)
(203.2)
(254.0)
(304.8)
(355.6)
C
75/8
95/8
115/8
135/8
155/8
(C)
(193.7)
(244.5)
(295.3)
(346.1)
(396.9)
(68.2)
Wt./C
Lbs.
110
164
200
253
318
kg
(49.9)
(74.4)
(90.7)
(114.7)
(144.2)
Part
No.
B587-1/2
B587-3/4
B587-1
For
Pipe Size
1/2
(15)
3/4
(20)
1
(25)
Wt./C
Lbs.
77
84
105
107
kg
Design
Load
Lbs.
kN
1000 (4.45)
(38.1) 1400 (6.23)
(47.6) 1900 (8.45)
(34.9)
Strut Fittings
53/8
(136.5)
211/16
A
23/8
43/8
63/8
83/8
103/8
kg
(79.8)
13/16
(20.6)
B411-12 12
B411-15 15
B411-18 18
B381-B385
Part
No.
B381
B382
B383
B384
B385
3/8
(9.5)
Miscellaneous Fittings
B349
B350
21/8
(54.0)
1 Hole
315/16
1 Hole
7/16(11.1) Dia.
6 Holes
11/32
2 Holes
(26.2)
(26.2)
13/32
15/8
121/32
(41.3)
121/32
(42.0)
(42.0)
B614
(100.0)
(88.9)
7/16(11.1) Dia.
11/32
315/16
31/2
(100.0)
21/32 (27.8)
(16.7)
B613
B613A
15/8
(41.3)
15/8
(41.3)
31/2
(88.9)
3/8 x 2 Cone
3/8 x 2 Cone
Point
Setscrews
Point
Setscrews
B560
B562
45 STAIR SUPPORT
87/8
(225.4)
87/8
(225.4)
Strut Fittings
31/2
(88.9)
31/2
31/2
(88.9)
11/16
(27.0)
17/8
(88.9)
13/16
31/2
45
13/16
(47.6)
31/2
(88.9)
11/16
(27.0)
(88.9)
371/2
(20.6)
(20.6)
33/4
33/4
(95.2)
(95.2)
108
17/8
(47.6)
Miscellaneous Fittings
B376
35/16
B377
15/16
(84.1)
(33.3)
11/8 (28.6)
15/16
31/8
300
450
600
(1.33)
(2.00)
(2.67)
(23.8)
(79.4)
Design Load
@600
@300
@100
Lbs.
kN
RPM
150
225
437
(.67)
(1.00)
@600
@300
@100
(1.94)
13/16
(20.6)
11/4
(31.7)
Design Load
B478
11/4
(31.7)
11/8
(28.6)
13/4
(44.4)
B477P
B478P
WITH PLASTIC
BEARINGS
11/32
Design Load
10 Lbs. (.045 kN)
5/8
(15.9)
9/32 (7.1)
Dia. Hole
(19.0)
(28.6)
Bearing O.D.
B477
3/4
11/8
33/8
(85.7)
(33.3)
5/8
(15.9)
Lbs.
15/16
(8.7)
WITH PLASTIC
BEARINGS
Design Load
20 Lbs. (.090 kN)
9/32
x 9/16
(7.1)
(14.3)
(7.1)
Dia. Hole
Slot-(2)
3/4
(19.0)
11/4
(31.7)
9/32
3
(76.2)
2
(50.8)
Design Load
Design Load
B478H
B477H
(31.7)
11/8
(28.6)
B477HP
WITH PLASTIC
BEARINGS
Design Load
10 Lbs. (.045 kN)
3/4 I.D
(19.0)
11/4
B478HP
WITH PLASTIC
BEARINGS
315/16
(100.0)
11/32
1/4 (6.3)
EYE ROD
Design Load
20 Lbs. (.090 kN)
(8.7)
1/4 (6.3)
EYE ROD
3/4 I.D
(19.0)
Design Load
Design Load
109
Strut Fittings
Miscellaneous Fittings
B203-B206 & B220-B223
B283-B286
Part
No.
B203
B204
B205
B206
B220
B221
B222
B223
Wt./C
Use With
(A)
Lbs.
kg
B42
B54
B22
B32
B52
B12
B11
B24
1.015
.827
1.640
1.390
.827
2.452
3.265
1.640
(25.8)
(21.0)
(41.6)
(35.3)
(21.0)
(62.3)
(82.9)
(41.6)
6
5
10
8
4
15
20
10
(2.7)
(2.2)
(4.5)
(3.6)
(1.8)
(6.8)
(9.1)
(4.5)
B
Wt./C
Part
No.
Use With
B283
B284
B285
B286
B52
B54 & B56
B22
B24 & B26
119/32
119/32
119/32
119/32
(A)
(B)
Lbs.
kg
6
6
13
14
(2.7)
(2.7)
(5.9)
(6.3)
3/8 (9.5)
119/32
119/32
(40.5)
(40.5)
Dia. Hole
25/8
(66.7)
A
113/16
(46.0)
Part
No.
Strut Fittings
B287
B288
Wt./C
Use With
Lbs.
kg
B22
B24
13
14
(5.9)
(6.3)
Part
No.
Use With
Wt./C
B3322
B3332
B3342
B3352
B22I
B32I
B42I
B52I
1.270
1.000
.645
.460
(A)
(32.2) 13/16
(25.4) 13/16
(16.4) 11/4
(11.7) 15/16
(B)
Lbs.
kg
(30.2)
(30.2)
(31.8)
(33.3)
15
15
15
15
(6.8)
(6.8)
(6.8)
(6.8)
B822
B822A
B852
11/4
(31.7)
11/4
(31.7)
11/4
(31.7)
110
Miscellaneous Fittings
B823
B825
Material: PVC
Available in colors: White (W),
Yellow (Y), Black (BLK), Gray (GRY),
Green (GRN)
Material: Polyurethane
Available in colors: Gray (GRY), Green (GRN)
Part No.
Fits
Channel Sizes
Wt./C
Lbs.
kg
6.9
4.1
3.8
3.5
(3.1)
(1.8)
(1.7)
Part No.
B825-22
B825-52
(1.6)
Fits
Channel Sizes
B22 & B24
B52 & B54
Wt./C
Lbs.
kg
2.0
1.0
(0.9)
(0.4)
Strut Fittings
111
Beam Clamps
Beam Clamps
Cooper B-Lines beam attachments and pipe
supports offered in this section are designed to
provide supports without drilling or welding . A
complete selection of beam clamps, pipe clamps,
rollers, supports and accessories are designed
for use with Cooper B-Line channels and offer
many installation advantages.
Finish
PLN
Plain
ZN
Electro-Plated Zinc
GRN
HDG
CZ
SS4
SS6
AL
Dura-Green
Malleable Iron
Hot-Dipped Galvanized
Chromium Zinc
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum
Specification
ASTM A1018 Gr. 33
ASTM A1011 SS Grade 33
ASTM B633 SC3 Type III
or ASTM A653
ASTM A47 Gr. 32510
ASTM A123
ASTM F1136
ASTM A240
ASTM A240
ASTM B209
Load Data
The load data published includes a safety factor
of 5.0 unless noted (safety factor = ratio of ultimate
load to the design load).
1/4-20
3/8-16
1/2-13
4
5
5
7
11
15
Setscrew Size
Foot/Lbs.
Nm
5/8-11
3/4-10
21
28
34
46
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
112
Beam Clamps
B351L
Max. Flange
Thickness
Safety Factor of 5
Setscrew and locknut included
When Retaining Strap is required, order B3362, B3363
or B3365 separately
Standard finishes: ZN, SS4, PLN
Sizes Only
E
Rod Size
C
Part Number
With
Locknut
B351L-3/8 *
B351L-1/2 *
B351L-5/8 *
B351L-3/4 *
B351L-7/8
Rod
Size
A
3/8-16
1/2-13
5/811
3/4-10
7/8-9
B
23/8
23/8
23/8
23/8
3
C
23/8
23/8
21/4
31/4
31/4
(60.3)
(60.3)
(60.3)
(60.3)
(76.2)
D
3/4
3/4
3/4
3/4
(60.3)
(60.3)
(57.1)
(82.5)
(82.5)
(19.0)
(19.0)
(19.0)
(19.0)
(25.4)
13/8
13/8
13/8
13/8
17/8
Design Load
(34.9)
(34.9)
(34.9)
(34.9)
(47.6)
Wt./C
Lbs.
kg
Lbs.
kg
230
380
550
630
1200
(1.03)
(1.71)
(2.47)
(2.83)
(5.34)
41
41
60
71
184
(18.6)
(18.6)
(27.2)
(32.2)
(83.4)
3/4 (19.0)
B3036L
Max.
Flange
Thickness
Safety Factor of 5
When Retaining Strap is required, order B3363 or B3364 separately
Setscrew and locknut included
Material: Malleable iron
Standard finishes: ZN, PLN
ROD SIZE
A
Part Number
With
Locknut
B3036L-3/8
B3036L-1/2
B3036L-5/8
B3036L-3/4
Rod
Size
A
3/8-16
1/2-13
5/8-11
3/4-10
B
13/4
13/4
2
2
C
13/4
13/4
17/8
2
(44.4)
(44.4)
(50.8)
(50.8)
Design Load
(44.4)
(44.4)
(47.6)
(50.8)
Wt./C
Lbs.
kg
Lbs.
kg
300
380
530
530
(0.89)
(1.69)
(2.36)
(2.36)
29
28
55
72
(13.1)
(12.7)
(24.9)
(32.6)
3/4
(19.0)
L
A
Part No.
B3362*
B3363*
B3364*
B3365*
6 (152.4)
Lbs.
kg
Lbs.
kg
Lbs.
kg
Lbs.
kg
17
16
16
21
(7.7)
(7.2)
(7.2)
(9.5)
24
23
23
29
(10.9)
(10.4)
(10.4)
(13.1)
31
30
30
37
(14.0)
(13.6)
(13.6)
(16.8)
38
37
37
46
(17.2)
(16.8)
(16.8)
(20.8)
A
11/4
11/4
11/4
11/2
(31.7) 7/16
(31.7) 5/8
(31.7) 11/16
(38.1) 3/4
B
(11.1)
(15.9)
(17.4)
(19.0)
Reference page 112 for general fitting and standard finish specifications.
113
Beam Clamps
Beam Clamps
B3033
Beam Clamps
Throat Openings
11/4 (31.7) For
3/8 & 1/2 Sizes
Part No.
Rod
Size A
B3033-3/8
B3033-1/2
B3033-5/8
B3033-3/4
3/8-16
1/2-13
5/8-11
3/4-10
Design Load
B
21/4
25/16
25/8
211/16
C
(57.1)
2
(58.7) 23/16
(66.7) 21/2
(68.3) 21/2
(50.8)
(55.5)
(63.5)
(63.5)
D
11/8
11/4
13/8
17/16
Lbs.
kN
Wt./C
Lbs.
kg
UL Max.
Pipe Size
(20.8) 4
(29.0) 8
(52.6) 8
(63.5) 10
(100)
(200)
(200)
(250)
B3034
WEDGE C-CLAMP
Safety Factor of 5
3/4 (19.0) Max. Flange Thickness
Setscrew and locknut included
Material: Malleable iron
Standard finishes: ZN, PLN
Note:
3/8 & 1/2 Sizes
Are Reversible
Style
Sizes Only
Rod Size
Flange Thickness
Part No.
Rod
Size A
B3034-3/8*
B3034-1/2*
B3034-5/8
B3034-3/4
3/8-16
1/2-13
5/8-11
3/4-10
Design Load
B
15/8
113/16
13/4
2
C
(41.3)
2
(46.0) 23/16
(44.5) 21/8
(50.8) 21/4
(50.8) 7/8
(55.5) 13/16
(54.0) 11/8
(57.2 11/8
Lbs.
kN
Lbs.
Wt./C
kg
UL Max.
Pipe Size
54
51
70
98
(24.5)
(23.1)
(31.7)
(44.4)
4 (100)
8 (200)
-----
Fig. 65XT
Safety Factor of 5
Max. Flange Thickness
Setscrew and locknut included
Maximum Pipe Size 4 (100)
Design Load 610 Lbs. (2.71kN)
Material: Steel
Standard finishes: ZN, PLN
3/4 (19.0)
Rod Size
3/8-16
11/16
(27.0)
15/8
(41.3)
3/4 (19.0) Max.
Flange Thickness
7/8
11/2
(38.1)
Reference page 112 for general fitting and standard finish specifications.
114
(22.2)
Beam Clamps
Fig. 69 (Formally B-Line B3367)
RETAINING STRAP
69-3/8-L
69-1/2-L
69-5/8-L
69-3/4-L
For Use
With
B3033-3/8
B3034-3/8
&
65XT-3/8
9/16 (30.1) B3033-1/2 & B3034-1/2
11/16 (50.8)
B3033-5/8
13/16 (63.5)
B3033-3/4
7/16 (30.1)
Wt./C**
Lbs.
kg
23.9 (10.8)
Beam Clamps
Part No.
Hole Dia.
D
11/4
(31.7)
23.6 (10.7)
23.2 (10.5)
22.7 (10.3)
** Wt./C based on 6 (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.
Fig. 69R
RETROFIT RETAINING STRAP
Part No.
Slot
Width
69R-3/8-L
7/16 (30.1)
69R-1/2-L
For Use
With
11/4
(31.7)
Wt./C**
Lbs.
kg
** Wt./C based on 6 (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.
B3037Z
Z-PURLIN C-CLAMP
Design Load 500 Lbs. (2.22 kN)
Safety Factor of 5
Designed for attaching a 3/8-16 hanger rod
to the bottom flange of a Z-purlin
Setscrew and locknut included
Material: Malleable iron
Standard finishes: ZN, PLN
3
(76.2)
313/32
(86.5)
Bottom Hanger
Rod Threads
3/8-16
Reference page 112 for general fitting and standard finish specifications.
115
Beam Clamps
B444
Beam Clamps
A
(Bottom &
Back)
D
Design Load
Part No.
Thread
Size A
Set
Screw
B444-1/4
1/4-20
1/4-20
13/8
(34.9)
B444-5/16
B444-3/8
B444-1/2
5/16-18
1/4-20
(34.9)
3/8-16
1/2-13
1/2-13
5/8-11
13/8
17/8
23/8
Lbs.
kN
Lbs.
13/16 (30.1)
13/16 (30.1)
150
(.66) 24
150
(.66) 23
2 (50.8) 350 (7.12) 65
21/2 (63.5) 1000 (4.45) 132
(47.6)
(60.3)
BC442
Wt./C
kg
(10.9)
(10.4)
(29.5)
(59.9)
13/16
(20.6)
11/16
(17.5)
13/4
(44.5)
B210
B210A
BEAM CLAMP
BEAM CLAMP
Design Load
800 Lbs. (3.56 kN)
Safety Factor of 5
5/8 (15.9) Max. Flange Thickness
1/2-13 Setscrew included
Standard finish: ZN
Wt./C 100 Lbs. (45.3 kg)
Design Load
300 Lbs. (1.33 kN)
Safety Factor of 5
3/4 (19.0) Max. Flange Thickness
3/8-16 Setscrew included
Standard finish: ZN
Wt./C 60 Lbs. (27.2 kg)
5/8 (15.9)
Max. Flange
Thickness
(9.5)
1/4
(6.3)
3/4
(19.0)
1/2-13
TAP
Bottom
Plate
Only
3/4 (19.0)
Max. Flange
Thickness
3/8
1/2
(12.7)
3/8-16
TAP
Bottom
Plate
Only
2
(50.8)
11/2
(38.1)
2
(50.8)
Reference page 112 for general fitting and standard finish specifications.
116
11/2
(38.1)
Beam Clamps
B303 THRU B309 BEAM CLAMPS
Safety Factor of 5
Max. Flange Thickness 1/16 (1.6) thru 7/8 (22.2)
Setscrew included
When Retaining Strap is required, order B312 separately
Recommended Setscrew Torque: 3/8-16 150 in-lbs. (16.9 Nm)
1/2-13 350 in-lbs. (39.5 Nm)
Standard finishes: ZN, HDG
Rod
Size A
1/4-20
5/16-18
3/8-16
3/8-16
1/2-13
1/2-13
5/8-11
11/8
(28.6)
Max. Flange
Thickness
Design Load
Set
Screw
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
C
5
2 /16
25/16
25/16
27/16
27/16
29/16
29/16
(58.7)
(58.7)
(58.7)
(61.9)
(61.9)
(65.1)
(65.1)
T
11 Ga.
11 Ga.
11 Ga.
7 Ga.
7 Ga.
1/4
1/4
Lbs.
(3.0)
(3.0)
(3.0)
(4.5)
(4.5)
(6.3)
(6.3)
Wt./C
kN
400
600
600
1100
1100
1500
1500
Lbs.
kg
21/2
(1.78) 72 (32.6)
(2.67) 72 (32.6)
(2.67) 72 (32.6)
(4.89) 97 (44.0)
(4.89) 97 (44.0)
(6.67) 133 (60.3)
(6.67) 133 (60.3)
(63.5)
Safety Factor of 5
111/16 (42.8) Max. Flange Thickness
Setscrew included
When Retaining Strap is required, order B312 separately
Recommended Setscrew Torque: 1/2-13 350 in-lbs. (39.5 Nm)
5/8-11
700 in-lbs. (79.0 Nm)
Minimum flange thickness: B321-1 thru B321-3 1/4 (6.3)
B321-4 and B321-5 3/8 (9.5)
Standard finishes: ZN, HDG
15/8
(41.3)
111/16 (42.8)
Max. Flange
Thickness
C
31/4
(82.5)
A
Part No.
B321-1
B321-2
B321-3
B321-4
B321-5
Design Load
Rod
Size A
Setscrew
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
1/2-13
5/8-11
5/8-11
3/4-10
5/8-11
C
39/16
39/16
39/16
323/32
323/32
T
(92.1)
1/4
(6.3)
(92.1)
1/4
(6.3)
(92.1)
1/4
(6.3)
(94.4)
5/16
(7.9)
(94.4)
5/16
(7.9)
Lbs.
kN
1300
1400
1600
1800
2000
(5.78)
(6.23)
(7.12)
(8.00)
(8.89)
Wt./C
Lbs.
kg
187 (84.8)
186 (84.3)
185 (83.9)
239 (108.4)
238 (107.9)
B312 SERIES
RETAINING STRAP FOR USE WITH
B303 THRU B309 AND B321 SERIES
3/4 (19.0)
Part No.
B312-6
B312-9
B312-12
B312-15
Wt./C
For Flange
Width
6
9
12
15
(152.4)
(228.6)
(304.8)
(381.0)
A
9
12
15
18
(228.6)
(304.8)
(381.0)
(457.2)
Lbs.
kg
22
30
40
49
(10.0)
13/4
(44.4)
A
(18.1)
(22.2)
11/4
(31.7)
Reference page 112 for general fitting and standard finish specifications.
117
1/2
(12.7)
(13.6)
1/4
(6.3)
Beam Clamps
Part No.
B303
B304
B305
B306
B307
B308
B309
Beam Clamps
Beam Clamps
B751
B752
BEAM CLAMP
Safety Factor of 5
3/4 (19.0) Max. Flange Thickness
Setscrew and Locknut included
Maximum ATR Size 1/2
Use B753 Swivel Nut (not included)
Material: 12 Gauge (2.6)
Standard finish: ZN, HDG
Wt./C 42 Lbs. (19.0 kg)
(25.4)
(50.8)
Overall
Height
31/4
(82.5)
3
(76.2)
B751-J_-3/8
BEAM CLAMP ASSEMBLY
Includes:
1 pc. B751 Beam Clamp
1 pc. B701 Type J-Hook only
1 pc. SA203-158 Clip
1 pc. 3/8-16 Hex Nut
1/4 (6.3) Diameter J-Hook available upon request
Part Number changes to B751-J_-1/4 and a 1/4-20
Machine Square Nut (MSQN) is used
Use B753 Swivel Nut (not included)
Standard finishes: ZN
B701-J_-3/8 J-Hook
B751 Clamp
Wt./C
Part No.
Lbs.
kg
B751-J4-3/8
3-6
(76.2-152.4)
70
(31.7)
B751-J6-3/8
B751-J9-3/8
B751-J12-3/8
5-9
8-12
11-15
(127.0-228.6)
78
83
88
(35.4)
(203.2-304.8)
(279.4-381.0)
(37.6)
(39.9)
B753
B701 SERIES
SWIVEL NUT
J-HOOK
SA203-158 Clip
Part No.
Part No.
B753-3/8
B753-1/2
Wt./C
For
Rod Size Lbs. kg
3/8-16
1/2-13
4.0
3.4
(1.8)
(1.5)
B701-J4-3/8
B701-J6-3/8
B701-J9-3/8
B701-J12-3/8
TL
3/8-16 Hex Nut
Thread Length
TL
A
83/4
113/4
143/4
173/4
(222.2)
(298.4)
(374.6)
(450.8)
51/2
61/2
61/2
61/2
(139.7)
(165.1)
(165.1)
(165.1)
Reference page 112 for general fitting and standard finish specifications.
118
Wt./C
Lbs.
26
34
41
48
kg
(11.8)
(15.4)
(18.6)
(21.8)
Beam Clamps
B755
3/8
B756-3/8
BEAM CLAMP
SWING CONNECTOR
Safety Factor of 5
5/8 (15.9) Max. Flange Thickness
For 3/8-16 Hanger Rod only.
Machine Nuts
1
(25.4)
21/2
(60.3)
For Swing
Connector
3/8-16 ROD
Design Load
150 Lbs. (0.66 kN)
Beam Clamps
3/8-16 Square
Overall
Height
7/8
(22.2)
17/8
(47.6)
Design Load
300 Lbs. (1.33 kN)
B755-3/8-J_
BEAM CLAMP ASSEMBLY
Includes:
1 pc. B755-3/8 Beam Clamp
1 pc. B705 Type J-Hook only
1 pc. B705 Clip
1 pc. 1/4-20 Square Nut
Standard finish: ZN
B755 Clamp
B705-J_
J-Hook Only
B705 Clip
Wt./C
Part No.
B755-3/8-J4
B755-3/8-J6
B755-3/8-J10
B755-3/8-J12
4-6
6-10
10-12
12-14
(101.6-152.4)
(152.4-254.0)
(254.0-304.8)
(304.8-355.6)
B702
B705 SERIES
CLEAT
J-HOOK
Lbs.
kg
47
51
53
55
(21.3)
(23.1)
(24.0)
(24.9)
B705-J_
J-Hook Only
B705 Clip
1/4-20
Machine Nut
TL
17/32
(30.9)
1
(25.4)
13/32 (10.3)
Dia. Hole
B705-J4
B705-J6
B705-J10
B705-J12
Thread Length
TL
Part No.
73/8
113/8
133/8
153/8
(187.3)
(288.9)
(339.7)
(390.5)
3
41/2
41/2
41/2
(76.2)
(114.3)
(114.3)
(114.3)
Reference page 112 for general fitting and standard finish specifications.
119
Wt./C
Lbs.
17
21
23
25
kg
(7.7)
(9.5)
(10.4)
(11.3)
Beam Clamps
B750 SERIES
Beam Clamps
BEAM CLAMP
1/2-13 Rod
& Hex
Nut Sold
Separately
Safety Factor of 5
Design Load 500 Lbs. (2.22 kN)
Recommended Torque:
J-Hook Nut 125 in-lbs. (14.1 Nm)
Maximum Flange Thickness 5/8 (15.9)
Standard finish: ZN
7 Ga
(4.6)
Wt./C
Part No.
Lbs.
15/8
kg
127/32
(46.8)
(41.3)
3-6
5-9
8-12
11-15
B750-J4
B750-J6
B750-J9
B750-J12
109
124
135
147
(76.2-152.4)
(127.0-228.6)
(203.2-304.8)
(279.4-381.0)
(49.4)
(56.2)
(61.2)
(66.7)
B700 SERIES
J-HOOK
Includes:
1 pc. J-Bolt
1 pc. Hex Nut
Maximum Flange Thickness 5/8 (15.9)
Standard finish: ZN
1/2-13
Threads
TL
A
Part No.
Thread Length
TL
B700-J4
B700-J6
B700-J9
B700-J12
81/2
(215.9)
111/2
141/2
171/2
(292.1)
(368.3)
(444.5)
63/4
(171.4)
93/4 (247.6)
123/4 (323.8)
153/4 (400.0)
Wt./C
Lbs.
kg
44
53
63
78
(19.9)
(24.0)
(28.6)
(35.4)
B500 SERIES
SQUARE U-BOLT
Includes:
1 pc. U-Bolt only
2 pcs. 3/8-16 Hex Nuts
Additional sizes available
Standard finish: ZN, SS4
121/32
(42.1)
21/2
(63.5)
A
3/8-16
Threads
Part No.
B500-3-3/8
B500-5
A
33/8
5
(85.7)
(127.0)
Channel
Size
Wt./C
Lbs.
kg
15/8 x 15/8
31/4 x 15/8
25
33
(11.3)
(14.9)
Reference page 112 for general fitting and standard finish specifications.
120
Beam Clamps
B441-22A
B314
BEAM CLAMP
BEAM CLAMP
BEAM CLAMP
23/8
(60.3)
3
3
23/8
(76.2)
(60.3)
(76.2)
1
(25.4)
33/8
(85.7)
13/4
(44.4)
1/4
(6.3)
5
(127.0)
(25.4)
1/4
(6.3)
1/4
(6.3)
B441Z-22
B441Z-22A
BEAM CLAMP
BEAM CLAMP
(25.4)
(25.4)
(76.2)
(76.2)
1/4
(6.3)
45/8
(117.5)
45/8
(117.5)
1/4
(6.3)
23/4
(69.9)
43/8
(111.1)
Reference page 112 for general fitting and standard finish specifications.
121
37/16
(87.3)
13/4
(44.4)
Beam Clamps
B441-22
Beam Clamps
Beam Clamps
B211
B213
I-BEAM CLAMP
11/2
(38.1)
11/2
(38.1)
3/8
(9.5)
31/4
(82.5)
21/2
(63.5)
B212-1/4
I-BEAM CLAMP
B355
BEAM CLAMP
Design Load 1200 Lbs. (5.34 kN)
when used in pairs
Safety Factor of 5
5/8 (15.9) Max. Flange Thickness
Sold in pieces
Order 1/2-13 x 11/2 HHCS and
Channel Nut separately
Standard finishes: ZN, GRN, HDG, SS4
15/8
Wt./C 30 Lbs. (13.6 kg)
(41.3)
I.D.
1/4 Thick
(6.3)
5/8
(15.9)
127/32
(46.8)
(50.8)
1/4
11/4
(6.3)
(31.7)
B212-3/8
I-BEAM CLAMP
B435
BEAM CLAMP
11/4
(31.7)
I.D.
3/8
(9.5)
3/8 THICK
11/4
(31.7)
(9.5)
27/8
(73.0)
2
(50.8)
11/4
(50.8)
(31.7)
Reference page 112 for general fitting and standard finish specifications.
122
Beam Clamps
B405
B405A
BEAM CLAMP
SUSPENSION MEMBER
SUSPENSION MEMBER
WITH BEAM CLAMP
7/8 (22.2) Max. Flange Thickness
Includes:
1 pc. B405 Suspension Member
1 pc. B213 I-Beam Clamp
1 pc. 1/2-13 x 21/2 HHCS
1 pc. 1/2-13 Hex Nut
Material: Malleable iron
Standard finishes: ZN, GRN
Wt./C 183 Lbs. (83.0 kg)
37/8
(87.3) O.D.
1/4
(6.3)
111/16
(42.9)
I.D.
10
37/16
2 Holes
9/16 (14.3)
DIA.
27/8
(73.0)
2
3/8
(9.5)
11/2
(38.1)
(50.8)
(87.3)
111/16
17/8
17/8
(47.6)
O.D.
(47.6)
Part No.
B318
B319
B320
A
71/4
81/2
103/8
(184.1)
(215.9)
(263.5)
1/4
(6.3)
15/8
(41.3)
B
A
Design
Lbs.
For Flange Width B
23/8-41/2 (60.3-114.3) 1200
33/4-53/4 (95.2-146.0)
800
55/8-75/8 (142.9-193.7) 560
Load
Wt./C
kN
Lbs.
kg
(5.34)
(3.56)
(2.49)
325
340
357
(147.4)
(154.2)
(161.9)
Part No.
B602A
B602B
B602C
A
71/4
81/2
103/8
(184.1)
(215.9)
(263.5)
1/4
(6.3)
13/4
(44.4)
B
A
Design
Lbs.
For Flange Width B
23/8-41/2 (60.3-114.3) 1200
33/4-53/4 (95.2-146.0) 1200
55/8-75/8 (142.9-193.7) 1200
Load
Wt./C
kN
Lbs.
kg
(5.34)
(5.34)
(5.34)
365
383
408
(165.1)
(173.7)
(185.0)
Reference page 112 for general fitting and standard finish specifications.
123
(42.9)
Beam Clamps
B427
Beam Clamps
B760-22 SERIES
B760-22A SERIES
Beam Clamps
BEAM CLAMP
BEAM CLAMP
1/4
(6.3)
(76.2)
(76.2)
J-Hook and
Hex Nut
J-Hook and
Hex Nut
Wt./C
Part No.
B760-22-J4
B760-22-J6
B760-22-J9
B760-22-J12
Lbs.
4-57/8
(101.6-149.2)
6-87/8
9-117/8
12-147/8
(152.4-225.4)
(228.6-301.6)
(304.8-377.8)
122
129
135
141
Wt./C
Part No.
kg
B760-22A-J4
B760-22A-J6
6-87/8
B760-22A-J9 9-117/8
B760-22A-J12 12-147/8
(55.3)
(58.5)
(61.2)
(63.9)
(304.8-377.8)
BEAM CLAMP
Part No.
4-57/8 (101.6-149.2)
B761-22-4
B761-22-6
6-87/8 (152.4-225.4)
B761-22-9
9-117/8 (228.6-301.6)
B761-22-12 12-147/8 (304.8-377.8)
ATR
Length
4
6
9
12
Wt./C
Lbs. kg
Part No.
B761-22A-4
B761-22A-6
B761-22A-9
B761-22A-12
(67.1)
ATR
Length
Wt./C
Lbs. kg
(101.6-149.2) 4
(152.4-225.4) 6
(228.6-301.6) 9
Reference page 112 for general fitting and standard finish specifications.
124
(64.4)
(76.2)
(61.7)
(127.0)
(58.5)
(228.6-301.6)
B761-22A SERIES
129
136
142
148
(152.4-225.4)
BEAM CLAMP
(76.2)
kg
(101.6-149.2)
B761-22 SERIES
1/4
(6.3)
Lbs.
Beam Clamps
B614
B613A
15/8
(41.3)
15/8
(41.3)
31/2
(88.9)
31/2
(88.9)
3/8 x 2 Cone
3/8 x 2 Cone
Point
Setscrews
Point
Setscrews
B422 SERIES
RIGHT ANGLE CLAMP
Safety Factor of 5
Material: 7 Gauge (4.5)
Standard finishes: ZN, SS4
Part No.
B422-1/2
B422-3/4
B422-1
B422-11/4
B422-11/2
B422-2
B422-21/2
B422-3
B422-31/2
B422-4
Design Load
Vertical Pull
Conduit
Size
1/2
3/4
A
23/8
23/8
27/8
27/8
31/4
311/16
41/4
47/8
57/16
6
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
1
11/4
11/2
2
21/2
3
31/2
4
Lbs.
(60.3)
(60.3)
(73.0)
(73.0)
(82.5)
(93.7)
(107.9)
(123.8)
(138.1)
(152.4)
250
300
400
400
500
600
700
800
900
1000
kg
(1.11)
(1.33)
(1.78)
(1.78)
(2.22)
(2.67)
(3.11)
(3.56)
(4.00)
(4.45)
Wt./C
Lbs.
38
39
48
50
59
75
98
111
123
135
kg
(17.2)
(17.7)
(21.8)
(22.7)
(26.7)
(34.0)
(44.4)
(50.3)
(55.8)
(61.2)
B107S
B593
U-SUPPORT
CLEVIS SWIVEL
Includes:
1 pc. 3/8-16 x 2 HHCS
1 pc. 3/8-16 Hex Nut
Material: 11 Gauge (3.0)
Standard finishes: ZN, GRN
Wt./C 31 Lbs. (14.0 kg)
33/4
(95.2)
1
(25.4)
13/8
(34.9)
17/16
(36.5)
13/4
O.D.
(44.4)
4 Holes
9/16 (14.3) Dia.
21/2
(63.5)
11/4
(31.7)
Reference page 112 for general fitting and standard finish specifications.
125
Beam Clamps
B613
Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel
strips, plates or rod unless noted.
Finish
Code
PLN
Finish
Plain
ZN
Electro-Plated Zinc
GRN
DCU
HDG
YZN
SS4
SS6
AL
Dura-Green
Dura-Copper
Hot-Dipped Galvanized
Yellow Zinc Chromate
Stainless Steel Type 304
Stainless Steel Type 316
Aluminum
Specification
ASTM A1011
33,000 PSI min. yield
ASTM B633 SC3 Type III
or ASTM A653
ASTM A123
ASTM B633 SC3 Type II
ASTM A240
ASTM A240
ASTM B209
Load Data
The load data published includes a safety factor
of 5.0 unless noted (safety factor = ratio of
ultimate load to the design load).
1/4-20
3/8-16
1/2-13
4
5
5
7
11
15
Setscrew Size
Foot/Lbs.
Nm
5/8-11
3/4-10
21
28
34
46
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
126
Pipe Clamps
B2207 THRU B2213
MULTI-GRIP PIPE CLAMPS FOR THINWALL
(EMT), I.M.C., RIGID CONDUIT OR PIPE
Safety Factor of 5
Add PA to suffix for pre-assembled pipe clamps
Includes Combination Recess Hex Head Machine Screw and Square Nut
Material: ASTM A1011 33,000 PSI min. yield
Standard finish: ZN
Design Load 1
Design Load 3
Design Load 2
Nominal
Size
Material
Thickness
O.D. Size
Range
B2207
38
/
.557-.706 (14.2-17.9)
B2208
1/2
.701-.875 (17.8-22.2)
B2209
3/4
B2210
B2211
B2212
B2213
Part No.
BPC-8
BPC-12
BPC-16
BPC-20
BPC-24
BPC-32
BPC-40
BPC-48
BPC-56
BPC-64
A
Rigid or EMT
Conduit Size
1/2
(21.3)
3/4
(26.7)
1
(33.4)
11/4
(42.2)
11/2
(48.3)
2
(60.3)
21/2
(73.0)
3
(88.9)
31/2
(101.6)
4
(114.3)
Wt./C
Lbs.
11.2
12.7
14.5
16.5
18.5
21.5
21.5
22.0
23.0
27.5
kg
(5.1)
(5.8)
(6.6)
(7.5)
(8.4)
(9.8)
(9.8)
(10.0)
(10.4)
(12.5)
Design Load
Reference page 126 for general fitting and standard finish specifications.
127
Wt./C
Lbs.
kg
(4.1)
11
(5.0)
12
(5.4)
13
(5.9)
15
(6.8)
23
(10.4)
26
(11.8)
Part No.
Pipe Clamps
B2000 SERIES
PIPE AND CONDUIT CLAMPS
Safety Factor of 5
Add PA to suffix for pre-assembled pipe clamps
Includes Combination Recess Hex Head Machine Screw and Square Nut
Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
Standard finishes: ZN, HDG, SS4, SS6, AL
Design Load 1
Note: For EMT sizes 21/2 and larger use rigid conduit sizes.
Design Load 2
Design Load 3
Conduit
Size
3/8
(10)
1/2
(15)
3/4
(20)
1
11/4
11/2
2
(25)
(32)
(40)
(50)
Material
Thickness
16
16
16
14
14
12
12
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
(1.5)
(1.5)
(1.9)
(1.9)
(1.9)
(2.6)
(2.6)
Wt./C
Lbs.
kN
Lbs.
kg
Lbs.
kg
Lbs.
kg
400
400
400
600
600
800
800
(1.78)
50
50
50
75
75
125
125
(.22)
50
50
50
75
75
125
125
(.22)
10
10
11
16
19
28
33
(4.5)
(1.78)
(1.78)
(2.67)
(2.67)
(3.56)
(3.56)
(.22)
(.22)
(.33)
(.33)
(.56)
(.56)
(.22)
(.22)
(.33)
(.33)
(.56)
(.56)
(4.5)
(5.0)
(7.2)
(8.6)
(12.7)
(14.9)
Conduit
Size
3/8
(10)
1/2
(15)
3/4
(20)
1
11/4
11/2
2
21/2
3
31/2
4
41/2
5
6
7
8
10
12
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(115)
(125)
(150)
(175)
(200)
(254)
(305)
Material
Thickness
16 Ga.
16 Ga.
14 Ga.
14 Ga.
14 Ga.
12 Ga.
12 Ga.
12 Ga.
12 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
(1.5)
(1.5)
(1.9)
(1.9)
(1.9)
(2.6)
(2.6)
(2.6)
(2.6)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
Wt./C
Lbs.
kN
Lbs.
kg
Lbs.
kg
Lbs.
kg
400
400
600
600
600
800
800
800
800
1000
1000
1000
1000
1000
1000
1000
1000
1000
(1.78)
50
50
75
75
75
125
125
125
125
200
200
200
200
200
250
250
250
250
(.22)
50
50
75
75
75
125
125
125
125
150
150
150
150
150
200
200
200
200
(.22)
10
11
15
16
20
30
34
38
44
61
66
70
77
100
115
128
160
185
(4.5)
(1.78)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(3.56)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(.22)
(.33)
(.33)
(.33)
(.56)
(.56)
(.56)
(.56)
(.89)
(.89)
(.89)
(.89)
(.89)
(1.11)
(1.11)
(1.11)
(1.11)
(.22)
(.33)
(.33)
(.33)
(.56)
(.56)
(.56)
(.56)
(.67)
(.67)
(.67)
(.67)
(.67)
(.89)
(.89)
(.89)
(.89)
(5.0)
(6.8)
(7.2)
(9.1)
(13.6)
(15.4)
(17.2)
(19.9)
(27.6)
(29.9)
(31.7)
(34.9)
(45.3)
(52.1)
(58.0)
(72.6)
(83.9)
Reference page 126 for general fitting and standard finish specifications.
128
Pipe Clamps
B2000 SERIES
Design Load 1
PVC CLAMPS
Safety Factor of 5
Add PA to suffix for pre-assembled pipe clamps
Includes Combination Recess Hex Head Machine Screw and Square Nut
Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
Standard finishes: PVC
Size
1
11/4
11/2
2
21/2
3
31/2
4
5
6
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
.020 (.51mm)
.020 (.51mm)
B2008
B2030
B2032
B2005
B2012
B2013
B2014
B2015
B2016
B2017
B2019
B2020
B2002
B2030
B2032
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115
B2002
B2030
B2032
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115
B2029
B2003
B2004
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115
Nominal
Conduit
Size
3/8
1/2
3/4
1
11/4
11/2
2
(10)
(15)
(20)
(25)
(32)
(40)
(50)
.020 (.51mm)
.020 (.51mm)
B2026
B2027
B2029
B2003
B2004
B2005
B2039
B2026
B2027
B2029
B2031
B2011
B2005
B2039
B2026
B2027
B2029
B2031
B2011
B2005
B2039
B2001
B2008
B2009
B2031
B2011
B2036
B2013
B2000 SERIES
Design Load 1
Tubing
Size
B2024DCU
B2025DCU
B2026DCU
B2027DCU
B2008DCU
B2030DCU
B2032DCU
B2011DCU
B2038DCU
B2042DCU
B2046DCU
B2050DCU
B2054DCU
B2062DCU
B2110DCU
B2126DCU
1/4
3/8
1/2
5/8
3/4
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
O.D. Size
In.
(mm)
.375
.500
.625
.750
.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
(9.5)
(12.7)
(15.9)
(19.0)
(22.2)
(28.6)
(34.9)
(41.3)
(54.0)
(66.7)
(79.4)
(92.1)
(104.8)
(130.2)
(155.6)
(206.4)
Lbs.
kg
16 Ga.
16 Ga.
16 Ga.
16 Ga.
16 Ga.
14 Ga.
14 Ga.
14 Ga.
12 Ga.
12 Ga.
12 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
11 Ga.
8
9
10
10
11
15
17
19
32
35
39
54
61
70
94
123
(3.6)
(1.5)
(1.5)
(1.5)
(1.5)
(1.5)
(1.9)
(1.9)
(1.9)
(2.6)
(2.6)
(2.6)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
400
400
400
400
400
600
600
600
800
800
800
1000
1000
1000
1000
1000
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
50
50
50
50
50
75
75
75
125
125
125
200
200
200
250
250
(.22)
(.22)
(.22)
(.22)
(.22)
(.33)
(.33)
(.33)
(.56)
(.56)
(.56)
(.89)
(.89)
(.89)
(1.11)
(1.11)
50
50
50
50
50
75
75
75
125
125
125
150
150
150
200
200
(.22)
(.22)
(.22)
(.22)
(.22)
(.33)
(.33)
(.33)
(.56)
(.56)
(.56)
(.67)
(.67)
(.67)
(.89)
(.89)
Reference page 126 for general fitting and standard finish specifications.
129
Wt./C
(4.1)
(4.5)
(4.5)
(5.0)
(6.8)
(7.7)
(8.6)
(14.5)
(15.9)
(17.7)
(24.5)
(27.6)
(31.7)
(42.6)
(55.8)
3/4
Design Load 3
Conduit Coating
.020 (.51mm)
.040 (1.01mm)
Clamp Coating
Clamp Coating
Nominal
Conduit
1/2
Design Load 2
Pipe Clamps
B2000 SERIES
Design Load 1
O.D.
O.D.
Design Load 2
Design Load 3
O.D. CLAMPS
Part
No.
O.D.
Size (in.)
Hardware
Size
Material
Design Load 1 Design Load 2 Design Load 3
Gauge Thickness Lbs.
kN
Lbs.
kN
Lbs.
kN
Wt./C
Lbs.
kg
B2023
1/4
(6.3)
1/4-20
16
(1.5)
120
(.54)
30
(.13)
30
(.13)
(3.6)
B2024
3/8
(9.5)
1/4-20
16
(1.5)
300
(1.33)
40
(.18)
40
(.18)
(3.6)
B2025
1/2
(12.7)
1/4-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
(4.1)
B2026
5/8
(15.9)
1/4-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
10
(4.5)
B2027
3/4
(19.0)
1/4-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
10
(4.5)
B2008
7/8
(22.2)
1/4-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
11
(5.0)
B2029
(25.4)
1/4-20
14
(1.9)
500
(2.22)
75
(.33)
75
(.33)
15
(6.8)
B2030
11/8
(28.6)
1/4-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
15
(6.8)
B2031
11/4
(31.7)
1/4-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
16
(7.3)
B2032
13/8
(34.9)
1/4-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
17
(7.7)
B2004
11/2
(38.1)
1/4-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
18
(8.2)
B2011
15/8
(41.3)
1/4-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
19
(8.6)
B2005
13/4
(44.4)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
29
(13.1)
B2036
17/8
(47.6)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
30
(13.6)
B2037
(50.8)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
30
(13.6)
B2038
21/8
(54.0)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
32
(14.5)
B2039
21/4
(57.1)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
32
(14.5)
B2013
23/8
(60.3)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
34
(15.4)
B2041
21/2
(63.5)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
35
(15.9)
B2042
25/8
(66.7)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
35
(15.9)
B2043
23/4
(69.8)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2014
27/8
(73.0)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2045
(76.2)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2046
31/8
(79.4)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
39
(17.7)
B2047
31/4
(82.5)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
41
(18.6)
B2048
33/8
(85.7)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
43
(19.5)
B2015
31/2
(88.9)
5/16-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
44
(20.0)
B2050
35/8
(92.1)
5/16-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
54
(24.5)
B2051
33/4
(95.2)
5/16-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
57
(25.8)
B2052
37/8
(41.3)
5/16-18
11
(3.0)
1000
(4.45
200
(.89)
150
(.67)
55
(25.0)
B2016
(101.6)
5/16-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
57
(25.8)
B2054
41/8
(104.8)
5/16-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
61
(27.7)
B2055
41/4
(107.9)
5/16-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
62
(28.1)
B2056
43/8
(111.1)
5/16-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
64
(29.0)
B2017
41/2
(114.3)
5/16-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
66
(29.9)
B2058
45/8
(117.5)
5/16-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
66
(29.9)
Reference page 126 for general fitting and standard finish specifications.
130
Pipe Clamps
B2000 SERIES
O.D. PIPE AND CONDUIT CLAMPS
Safety Factor of 5
Add PA to suffix for pre-assembled pipe clamps
Other sizes available upon request
Includes Combination Recess Hex Head Machine Screw and Square Nut.
Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
Design Load 1
Standard finishes: ZN, HDG, SS4
O.D.
O.D.
Design Load 2
Design Load 3
Part
No.
B2059
B2060
B2018
B2062
B2063
B2064
B2019
B2066
B2067
B2068
B2069
B2110
B2111
B2112
B2113
B2020
B2115
B2116
B2117
B2118
B2119
B2120
B2121
B2021
B2123
B2124
B2125
B2126
B2127
B2128
B2129
B2022
B2130
B2132
O.D.
Size (in.)
Hardware
Size
43/4
(120.6)
5/16-18
47/8
5
1
5 /8
51/4
53/8
51/2
55/8
53/4
57/8
6
1
6 /8
61/4
63/8
61/2
65/8
63/4
67/8
7
1
7 /8
71/4
73/8
71/2
75/8
73/4
77/8
8
81/8
81/4
83/8
81/2
85/8
103/4
123/4
(123.8)
5/16-18
(127.0)
5/16-18
(130.2)
5/16-18
(133.3)
5/16-18
(136.5)
5/16-18
(139.7)
5/16-18
(142.9)
5/16-18
(146.0)
5/16-18
(149.2)
5/16-18
(152.4)
5/16-18
(155.6)
3/8-16
(158.7)
3/8-16
(161.9)
3/8-16
(165.1)
3/8-16
(168.3)
3/8-16
(171.4)
3/8-16
(174.6)
3/8-16
(177.8)
3/8-16
(181.0)
3/8-16
(184.1)
3/8-16
(187.3)
3/8-16
(190.5)
3/8-16
(193.7)
(196.8)
3/8-16
(200.0)
3/8-16
(203.2)
3/8-16
(206.4)
3/8-16
(209.5)
3/8-16
(212.7)
3/8-16
(215.9)
3/8-16
(219.1)
3/8-16
(273.0)
3/8-16
(323.8)
3/8-16
3/8-16
Material
Design Load 1 Design Load 2 Design Load 3
Gauge Thickness Lbs.
kN
Lbs.
kN
Lbs.
kN
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
(3.0)
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
200
200
200
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
150
150
150
150
150
150
150
150
150
150
150
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
Reference page 126 for general fitting and standard finish specifications.
131
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.67)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
(.89)
Wt./C
Lbs.
kg
68
69
70
70
70
77
78
83
84
85
87
94
96
98
99
100
102
104
106
108
110
112
114
115
117
119
121
123
125
126
128
128
160
185
(30.8)
(31.3)
(31.8)
(31.8)
(31.8)
(34.9)
(35.4)
(37.6)
(38.1)
(38.6)
(39.5)
(42.6)
(43.5)
(44.4)
(44.9)
(45.4)
(46.3)
(47.2)
(48.1)
(49.0)
(49.9)
(50.8)
(51.7)
(52.2)
(53.1)
(54.0)
(54.9)
(55.8)
(56.7)
(57.2)
(58.1)
(58.1)
(72.6)
(83.9)
O.D. CLAMPS
Pipe Clamps
B1508 THRU B1564S
Design Load
CONDUIT/STRUT CLAMPS
Safety Factor of 3
Clamps without saddles are not recommended
for flexible conduit or cable
All Sizes Include:
1/4-20 Slotted Hex Head Machine Screw
Standard finish: ZN
Setscrew
Thickness
Part No.
B1508
B1512
B1516
B1520
B1508S
B1512S
B1516S
B1520S
B1524S
B1532S
B1534S
B1540S
B1548S
B1556S
B1564S
EMT
Use With
Rigid Conduit
1/2
(15)
3/4
(20)
1/2
(15)
1
11/4
1/2
3/4
1
1
1 /4
11/2
2
21/2
3
31/2
4
(25)
3/4
(20)
(32)
1/2
3/4
1
11/4
11/2
2
21/2
3
31/2
4
(25)
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
Design Load
Thickness
16
16
14
14
16
16
14
14
12
12
12
12
12
12
12
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
(1.5)
(1.5)
(1.9)
(1.9)
(1.5)
(1.5)
(1.9)
(1.9)
(2.6)
(2.6)
(2.6)
(2.6)
(2.6)
(2.6)
(2.6)
Lbs.
200
200
300
300
200
200
300
300
400
400
400
400
400
400
400
Wt./C
kN
Lbs.
kg
(.89)
7.4
8.0
11.0
12.5
8.6
9.2
12.7
14.6
20.5
21.5
22.7
26.0
30.2
33.3
36.6
(3.4)
(.89)
(1.33)
(1.33)
(.89)
(.89)
(1.33)
(1.33)
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
Reference page 126 for general fitting and standard finish specifications.
132
(3.6)
(5.0)
(5.7)
(3.9)
(4.2)
(5.8)
(6.6)
(9.3)
(9.8)
(10.3)
(11.9)
(13.7)
(15.1)
(16.6)
Pipe Clamps
B2601 THRU B2610
TWIST EAR PIPE CLAMP
One piece break apart, screw retainer, thread impressions
Tighter alignment, no need to leave additional space between
clamps in order to access nut and bolt
Easier access bolt can be tightened directly from front
Available in 1/2, 3/4, 1 rigid and EMT Conduit
Recommended Torque 30 in. - lbs.
Safety Factor of 3
Standard finish: ZN
Design Load
B-Line
B26093/4
3/4" ST
D
B-Line
B26093/4
3/4" ST
D
B-Line
B26093/4
3/4"
STD
B-Line
B26093/4
3/4" ST
D
Part No.
B2601
B2602
B2603
B2608
B2609
B2610
EMT
Use With
Rigid Conduit
1/2
(17.9)
3/4
(23.4)
(29.5)
1/2
3/4
1
(21.3)
(26.7)
(33.4)
Design Load
Thickness
16
14
14
16
14
14
Lbs.
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
300
500
500
300
500
500
Wt./C
kN
Lbs.
kg
(1.34)
8.2
13.5
15.6
8.2
13.5
15.6
(3.7)
(2.24)
(2.24)
(1.34)
(2.24)
(2.24)
(6.1)
(7.1)
(3.7)
(6.1)
(7.1)
Design Load
P CLAMPS
Minimizes induction heating
Material: Stainless Steel Type 304
Setscrew
W
O.D. Size
H
14 Gauge
O.D. Size
Part No.
BP081SS
BP110SS
BP135SS
BP175SS
BP205SS
BP250SS
BP300SS
BP325SS
BP375SS
BP425SS
BP475SS
In.
mm
.250-.840 (6.4-21.3)
.810-1.100 (20.6-28.0)
.850-1.350 (21.6-34.8)
1.250-1.750 (31.8-44.4)
1.550-2.050 (39.4-52.1)
2.00-2.50 (50.8-63.5)
2.55-3.00 (64.7-76.2)
2.75-3.25 (69.9-82.8)
3.25-3.75 (82.6-95.3)
3.75-4.25 (95.3-108.0)
4.25-4.75 (108.0-120.7)
Height H
Width W
Design Load
Wt/C.
In.
mm
In.
mm
Lbs.
kN
Lbs.
kg
1.86
2.18
2.25
2.78
3.00
3.43
3.87
4.06
4.60
5.13
5.70
(47.2)
(55.4)
(57.2)
(70.6)
(76.2)
(87.1)
(97.8)
(103.1)
(116.8)
(130.3)
(5.70)
0.87
1.19
1.38
1.78
2.28
2.83
3.15
3.28
3.83
4.50
4.85
(22.1)
(30.2)
(35.1)
(45.2)
(57.9)
(71.9)
(80.0)
(83.3)
(97.3)
(114.3)
(123.2)
300
300
300
300
300
300
300
300
300
300
300
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
9.0
12.0
14.0
21.0
30.0
35.0
39.0
41.0
47.0
54.0
58.0
(4.1)
(5.4)
(6.3)
(9.5)
(13.6)
(15.9)
(17.7)
(18.6)
(21.3)
(24.4)
(26.3)
Reference page 126 for general fitting and standard finish specifications.
133
Catalog
Number
BVT025
BVT037
BVT050
BVT062
BVT075
BVT087
BVT100
BVT112
BVT125
BVT137
BVT150
BVT162
BVT175
BVT187
BVT200
BVT212
BVT225
BVT250
BVT262
BVT300
BVT312
BVT362
BVT412
BVT612
Catalog
Number
Tubing
O.D. Size
1/4
3/8
1/2
5/8
3/4
7/8
1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/8
21/4
21/2
25/8
3
31/8
35/8
41/8
61/8
Design Load
1
Lbs.
BVT025
BVT037
BVT050
BVT062
BVT075
BVT087
BVT100
BVT112
BVT125
BVT137
BVT150
BVT162
BVT175
BVT187
BVT200
BVT212
BVT225
BVT250
BVT262
BVT300
BVT312
BVT362
BVT412
BVT612
(6.3)
(9.5)
(12.7)
(15.9)
(19.0)
(22.2)
(25.4)
(28.6)
(31.7)
(34.9)
(38.1)
(41.3)
(44.4)
(47.6)
(50.8)
(54.0)
(57.1)
(63.5)
(66.6)
(76.2)
(79.4)
(92.1)
(104.8)
(155.5)
400
400
400
400
600
600
600
600
600
600
600
800
800
800
800
800
800
800
800
800
800
1000
1000
1000
kN
(1.78)
(1.78)
(1.78)
(1.78)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(4.45)
(4.45)
(4.45)
Copper
Tubing Size
1/8
1/4
3/8
1/2
5/8
3/4
11/4
11/2
21/2
3
31/2
4
6
(3)
(6)
(10)
(15)
(17)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(150)
Design
Load 2
A
B
C
Dimensions
B
A
1.22
1.36
1.49
1.62
1.87
2.00
2.25
2.25
2.51
2.51
2.74
3.00
3.13
3.28
3.52
3.52
3.64
3.91
4.02
4.42
4.53
5.05
5.55
7.62
(30.9)
(34.5)
(37.8)
(41.1)
(47.4)
(50.8)
(57.1)
(57.1)
(63.7)
(63.7)
(69.6)
(76.2)
(79.5)
(83.3)
(89.4)
(89.4)
(92.4)
(99.3)
(102.1)
(112.2)
(115.0)
(128.2)
(140.9)
(193.5)
Design Load
2
Design Load
3
Lbs.
Lbs.
50
50
50
50
75
75
75
75
75
75
75
125
125
125
125
125
125
125
125
125
125
200
200
200
kN
(0.22)
(0.22)
(0.22)
(0.22)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.89)
(0.89)
(0.89)
50
50
50
50
75
75
75
75
75
75
75
125
125
125
125
125
125
125
125
125
125
150
150
150
Design
Load 3
kN
(0.22)
(0.22)
(0.22)
(0.22)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.33)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.56)
(0.67)
(0.67)
(0.67)
134
0.19
0.25
0.31
0.38
0.50
0.56
0.69
0.69
0.81
0.81
0.88
1.00
1.06
1.13
1.25
1.25
1.31
1.43
1.50
1.68
1.75
2.00
2.25
3.25
(4.8)
(6.3)
(7.8)
(9.6)
(12.7)
(14.2)
(17.5)
(17.5)
(20.6)
(20.6)
(22.4)
(25.4)
(26.9)
(28.7)
(31.7)
(31.7)
(33.2)
(36.3)
(38.1)
(42.6)
(44.4)
(50.8)
(57.1)
(82.5)
Wt./C
C
Lbs.
kg
0.49 (12.4)
0.61 (15.5)
0.74 (18.8)
0.86 (21.8)
1.15 (29.2)
1.27 (32.2)
1.52 (38.6)
1.52 (38.6)
1.78 (45.2)
1.78 (45.2)
1.96 (49.8)
2.20 (55.9)
2.33 (59.1)
2.46 (62.5)
2.70 (68.6)
2.70 (68.6)
2.83 (71.8)
3.11 (79.0)
3.20 (81.3)
3.61 (91.6)
3.70 (93.9)
4.23 (107.4)
4.73 (120.1)
6.74 (171.1)
11
12
14
15
19
21
22
26
36
38
35
40
44
40
55
55
54
56
55
67
64
76
93
136
(5.0)
(5.4)
(6.3)
(6.8)
(8.6)
(9.5)
(10.0)
(11.8)
(16.3)
(17.2)
(15.9)
(18.1)
(19.9)
(18.1)
(25.0)
(25.0)
(24.5)
(25.4)
(25.0)
(30.4)
(29.0)
(34.5)
(42.2)
(61.6)
Design Load 1
Design
Load 2
A
Design
Load 3
B
C
Catalog
Number
Nominal
Pipe Size
1/4
(6.3)
3/8
(9.5)
1/2
(12.7)
3/4
(19.0)
1
(25.4)
11/4
(31.7)
11/2
(38.1)
2
(50.8)
21/2
(63.5)
3
(76.2)
31/2
(88.9)
4
(101.6)
5
(127.0)
6
(152.4)
Steel
O.D. Size
0.540
(13.7)
0.675
(17.1)
0.875
(22.2)
1.050
(26.7)
1.312
(33.3)
1.660
(42.2)
1.900
(48.3)
2.375
(60.3)
2.875
(73.0)
3.500
(88.9)
4.000
(101.6)
4.500
(114.3)
5.563
(141.3)
6.625
(168.3)
Design Load
1
Design Load
2
Lbs.
BVP025
BVP037
BVP050
BVP075
BVP100
BVP125
BVP150
BVP200
BVP250
BVP300
BVP350
BVP400
BVP500
BVP600
400
600
600
600
600
800
800
800
800
1000
1000
1000
1000
1000
kN
(1.78)
(2.67)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(3.56)
(4.45)
(4.45)
(4.45)
(4.45)
(4.45)
Lbs.
50
75
75
75
75
125
125
125
125
200
200
200
200
200
kN
(0.22)
(0.33)
(0.33)
(0.33)
(0.33)
(0.56)
(0.56)
(0.56)
(0.56)
(0.89)
(0.89)
(0.89)
(0.89)
(0.89)
A
1.61
1.86
1.99
2.25
2.51
3.00
3.21
3.77
4.28
5.05
5.55
6.05
6.84
8.24
(39.9)
(47.2)
(50.5)
(57.1)
(63.8)
(76.2)
(83.1)
(95.8)
(108.7)
(128.3)
(140.9)
(153.7)
(173.7)
(209.3)
Dimensions
B
0.37
(9.4)
0.50 (12.7)
0.56 (14.2)
0.69 (17.5)
0.81 (20.6)
1.00 (25.4)
1.12 (28.4)
1.37 (34.8)
1.62 (41.1)
2.00 (50.8)
2.25 (57.1)
2.50 (63.5)
3.00 (76.2)
3.56 (90.4)
C
0.87
1.15
1.27
1.52
1.77
2.21
2.41
2.96
3.46
4.24
4.74
5.24
6.24
7.36
(22.1)
(29.2)
(32.3)
(38.6)
(45.0)
(56.1)
(62.3)
(75.2)
(87.9)
(107.7)
(120.3)
(133.1)
(158.4)
(186.9)
Design Load
3
Lbs.
50
75
75
75
75
125
125
125
125
150
150
150
150
150
kN
(0.22)
(0.33)
(0.33)
(0.33)
(0.33)
(0.56)
(0.56)
(0.56)
(0.56)
(0.67)
(0.67)
(0.67)
(0.67)
(0.67)
Reference page 126 for general fitting and standard finish specifications.
135
Wt./C
Lbs.
kg
15
18
20
21
20
36
40
45
54
81
87
109
136
163
(6.8)
(8.2)
(9.1)
(9.5)
(9.1)
(16.3)
(18.1)
(20.4)
(24.5)
(36.7)
(39.4)
(49.4)
(61.6)
(73.8)
Catalog
Number
BVP025
BVP037
BVP050
BVP075
BVP100
BVP125
BVP150
BVP200
BVP250
BVP300
BVP350
BVP400
BVP500
BVP600
O.D.
3
/2
Insert Only
Assembly
Insert & Clamp
4
IPH31812 IPH31812WO
31/8 O.D.
IPH35812 IPH35812WO
35/8 O.D.
5
IPH41812 IPH41812WO
41/8 O.D.
6
3/4 Wall Insulation Thickness
IPH40012 IPH40012WO
4 IPS
6
IPH50012
IPH50012WO
5
IPS
8
Assembly Insert Only
Pipe/Copper/OD Hanger
IPH60012 IPH60012WO
6 IPS
8
Part No.
Part No.
Size
Size*
IPH03834
IPH01234
IPH05834
IPH03434
IPH07834
IPH11834
IPH13834
IPH15834
IPH11034
IPH21834
IPH25834
IPH31834
IPH35834
IPH41834
IPH40034
IPH50034
IPH60034
IPH80034
3/8 O.D.
IPH03834WO
1/2 O.D.
IPH01234WO
5/8 O.D.
IPH05834WO
3/4 O.D.
IPH03434WO
7/8 O.D.
IPH07834WO
3
IPH11834WO /4 IPS & 11/8 O.D.
IPH13834WO
13/8 O.D.
IPH15834WO
15/8 O.D.
IPH11034WO 11/2 IPS & 17/8 O.D.
IPH21834WO
21/8 O.D.
IPH25834WO
25/8 O.D.
IPH31834WO
31/8 O.D.
IPH35834WO
35/8 O.D.
IPH41834WO
41/8 O.D.
IPH40034WO
4 IPS
IPH50034WO
5 IPS
IPH60034WO
6 IPS
IPH80034WO
8 IPS
2
2
2
2
21/2
21/2
3
31/2
31/2
4
5
5
6
6
6
8
10
12
IPH18230
ARMAFLEX INSUALTION TAPE
30 ft. (9.14 M) roll
Insert Only
Pipe/Copper/OD Hanger
Part No.
Size
Size*
5/8 O.D.
21/2
IPH05810WO
3
IPH03410WO
/4 O.D.
21/2
7
IPH07810WO
/8 O.D.
3
IPH11810WO 3/4 IPS & 11/8 O.D.
3
IPH13810WO
13/8 O.D.
31/2
IPH15810WO
15/8 O.D.
31/2
IPH11010WO 11/2 IPS & 17/8 O.D.
4
IPH21810WO
21/8 O.D.
4
IPH25810WO
5
25/8 O.D.
IPH31810WO
31/8 O.D.
5
IPH35810WO
6
35/8 O.D.
IPH41810WO
41/8 O.D.
6
IPH40010WO
4 IPS
8
IPH50010WO
8
5 IPS
IPH60010WO
6 IPS
10
IPH80010WO
8 IPS
12
Reference page 126 for general fitting and standard finish specifications.
136
FEATURES
VIBRA CUSHION
15/8
(41.3)
Length of
Use
Vibra-Cushion Clamp No.
21/8 (54.0) B2002
25/8 (66.7) B2009
31/4 (82.5) B2031
41/8 (104.8) B2004
53/16 (131.8) B2012
515/16 (150.8) B2038
71/2 (190.5) B2042
9 (228.6) B2046
11 (279.4) B2051
121/2 (317.5) B2055
141/2 (368.3) B2059
177/16 (442.9) B2067
203/4 (527.0) B2116
1
11/4
11/2
2
(25)
(32)
(40)
(50)
Length of
Use
Vibra-Cushion Clamp No.
113/16 (46.0)
213/16 (58.7)
27/8
(73.0)
35/8
(92.1)
43/8 (120.6)
57/16 (138.1)
67/8 (174.6)
B2027
B2002
B2003
B2032
B2036
B2012
B2013
1
(25.4)
ISO
Thickness
Length of
Use
Vibra-Cushion Clamp No.
13/16 (30.2) B2026
19/16 (39.7) B2027
17/8
(47.6) B2008
25/16 (58.7) B2029
23/4
(69.8) B2030
31/2
(88.9) B2032
45/16 (109.5) B2011
51/8 (130.2) B2036
611/16 (169.9) B2013
81/4 (209.5) B2014
913/16 (249.2) B2048
113/8 (288.9) B2052
1215/16 (328.6) B2056
161/8 (409.6) B2064
191/4 (488.9) B2112
251/2 (647.7) B2128
ISO PIPE
Part No.
Nominal
Size
1/4
(6)
3/8
(10)
1/2
(15)
5/8
(17)
3/4
(20)
1
(25)
11/4 (32)
11/2 (40)
2
(50)
21/2 (65)
3
(80)
31/2 (90)
4 (100)
5 (125)
6 (150)
8 (200)
Ft./Roll
In.
mm
Ft.
Part No.
.020
(0.5)
36
(11)
BVS-12
BVS-120
Max. Load
Lbs. per
Lineal In.
Lbs. kg/25.4 mm
40
40
(18.1)
(18.1)
Length
12 (304.8)
120 (3048.0)
Reference page 126 for general fitting and standard finish specifications.
137
Wt.
Each
Std.
Pkg. Lbs. kg
25
25
.46 (.21)
4.60 (2.08)
Pipe Clamps
Design Load
1
B2400 SERIES
STANDARD PIPE STRAP
Pipe Size
Safety Factor of 5
B2400-3/4 thru B2400-8 are UL listed
Order hardware separately
Other sizes available upon request
Material: Sizes - 1/2 - 11/2, ASTM A1011 33,000 PSI min. yield;
2 - 12, ASTM A1018 33,000 PSI min. yield;
Design Load
14-Larger, ASTM A36
3
Standard finish: ZN
Ductile Iron Sizes Available
Meets requirements of MSS SP-58 & SP-69 Type 26
Part No.
B2400-1/2
B2400-3/4
B2400-1
B2400-11/4
B2400-11/2
B2400-2
B2400-21/2
B2400-3
B2400-31/2
B2400-4
B2400-5
B2400-6
B2400-8
B2400-10
B2400-12
B2400-14
B2400-16
B2400-18
B2400-20
B2400-24
Part No.
B2400-1/2
B2400-3/4
B2400-1
B2400-11/4
B2400-11/2
B2400-2
B2400-21/2
B2400-3
B2400-31/2
B2400-4
B2400-5
B2400-6
B2400-8
B2400-10
B2400-12
B2400-14
B2400-16
B2400-18
B2400-20
B2400-24
Pipe Size
1/2
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
(350)
(400)
(460)
(510)
(610)
3/4
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
10
12
14
16
18
20
24
A
5/16
5/16
5/16
5/16
5/16
7/16
7/16
7/16
7/16
9/16
9/16
9/16
9/16
9/16
9/16
15/16
15/16
15/16
15/16
15/16
Design Load
1
B
(7.9)
(7.9)
(7.9)
(7.9)
(7.9)
(11.1)
(11.1)
(11.1)
(11.1)
(14.3)
(14.3)
(14.3)
(14.3)
(14.3)
(14.3)
(23.8)
(23.8)
(23.8)
(23.8)
(23.8)
7/16
7/16
7/16
7/16
7/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/2
11/2
13/4
13/4
13/4
Hole Size
B
W
C
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(17.4)
(38.1)
(38.1)
(44.4)
(44.4)
(44.4)
213/16
3
317/32
33/4
41/16
521/32
65/32
625/32
79/32
725/32
87/8
915/16
1131/32
14
16
203/4
223/4
27
29
33
Design Load
2
T
(71.4)
(76.2)
(89.7)
(95.2)
(103.2)
(143.6)
(156.3)
(172.2)
(184.9)
(197.6)
(225.4)
(252.4)
(304.0)
(355.6)
(406.4)
(527.0)
(577.8)
(685.8)
(736.6)
(838.2)
10
10
10
10
10
Ga.
Ga.
Ga.
Ga.
Ga.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
Design Load
3
Design Load
2
W
(3.4)
(3.4)
(3.4)
(3.4)
(3.4)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(9.5)
(9.5)
(12.7)
(12.7)
(12.7)
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
13/4
13/4
13/4
13/4
13/4
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(41.3)
(44.4)
(44.4)
(44.4)
(44.4)
(44.4)
Wt./C
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
600
600
600
600
600
1200
1200
1200
1200
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(5.34)
(5.34)
(5.34)
(5.34)
(6.67)
(6.67)
(6.67)
(8.90)
(8.90)
(8.90)
(8.90)
(8.90)
(8.90)
(8.90)
(8.90)
150
150
150
150
150
480
480
480
480
600
600
600
800
800
800
800
800
800
800
800
(.67)
(.67)
(.67)
(.67)
(.67)
(2.14)
(2.14)
(2.14)
(2.14)
(2.67)
(2.67)
(2.67)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
105
105
120
120
120
180
180
300
300
450
450
450
600
600
600
600
600
600
600
600
(.47)
(.47)
(.53)
(.53)
(.53)
(.80)
(.80)
(1.33)
(1.33)
(2.00)
(2.00)
(2.00)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
(2.67)
23
26
31
36
39
93
106
132
151
160
192
219
297
465
560
761
861
1297
1426
1682
kg
(10.4)
(11.8)
(14.0)
(16.3)
(17.7)
(42.2)
(48.1)
(59.9)
(68.5)
(72.6)
(87.1)
(99.3)
(134.7)
(210.9)
(254.0)
(345.2)
(390.5)
(588.3)
(646.8)
(762.9)
Reference page 126 for general fitting and standard finish specifications.
138
Pipe Clamps
B437 SERIES TWO PIECE PIPE STRAP
Clamp halves can turn allowing pipe to
be fastened to channel at any direction
Order hardware separately
Standard finish: ZN
Wt./C
Part No.
1/2
(15)
3/4
(20)
(25)
11/4
(32)
11/2
2
21/2
3
31/2
4
5
6
8
(40)
/16
/16
5
/16
5
/16
5
/16
7
/16
7
/16
7
/16
7
/16
9
/16
9
/16
9
/16
9
/16
(7.9)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(7.9)
(7.9)
(7.9)
(7.9)
10
10
10
10
10
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
(11.1)
Ga.
Ga.
Ga.
Ga.
Ga.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
(3.4)
(3.4)
(3.4)
(3.4)
(3.4)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
(6.3)
Lbs.
kg
22
26
30
35
38
91
104
130
149
158
190
217
295
(10.0)
(11.8)
(13.6)
(15.9)
Hole Size
(17.2)
(41.3)
(47.2)
(58.9)
(67.6)
(71.6)
(86.2)
(98.4)
(133.8)
14 Gauge
(1.9)
Part No.
B2417-1/2
B2417-3/4
B2417-1
B2417-11/4
B2417-11/2
B2417-2
B2417-21/2
B2417-3
B2417-31/2
B2417-4
Minimum
Includes
Radial Clearance Clamp No.
Pipe Size
1
/2"
/4"
1"
11/4"
11/2"
2"
21/2"
3"
31/2"
4"
3
(15)
(1.6)
(20)
(1.6)
/16"
/16"
3
/32"
3
/32"
3
/32"
1
/8"
1
/8"
5
/32"
5
/32"
5
/32"
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(2.3)
(2.3)
(2.3)
(3.2)
(3.2)
(3.9)
(3.9)
(3.9)
B437-1/2
B437-3/4
B437-1
B437-11/4
B437-11/2
B437-2
B437-21/2
B437-3
B437-31/2
B437-4
B437-5
B437-6
B437-8
Pipe Size
B2009
B2010
B2034
B2037
B2039
B2043
B2047
B2016
B2017
B2018
Wt./C
Lbs.
kg
22
25
30
47
51
62
69
108
118
128
(10.0)
(11.3)
(13.6)
(21.8)
(23.1)
(28.1)
(31.3)
Clearance
(49.0)
(53.5)
(58.0)
Design Load
Part No.
B2070
B2071
B2072
B2073
B2074
B2075
B2076
B2077
B2078
B2079
B2080
Pipe Size
3/8 (10)
1/2 (15)
3/4 (20)
1 (25)
11/4 (32)
11/2 (40)
2 (50)
21/2 (65)
3 (80)
31/2 (90)
4 (100)
A
111/16
13/4
17/8
2
23/16
25/16
29/16
27/8
33/16
37/16
35/8
(42.9)
(44.4)
(47.6)
(50.8)
(55.6)
(58.7)
(65.1)
(73.0)
(80.9)
(87.3)
(92.1)
Reference page 126 for general fitting and standard finish specifications.
139
Wt./C
Lbs.
kg
24
26
30
33
36
50
55
60
66
85
95
(10.9)
(11.8)
(13.6)
(14.9)
(16.3)
(22.7)
(24.9)
(27.2)
(29.9)
(38.5)
(43.1)
Pipe Clamps
B670 SERIES
B671 SERIES
Part
Number
Pipe or Conduit
Wt./C
Size
Lbs.
kg
B670-3/8
B670-1/2
B670-3/4
B670-1
B670-11/4
B670-11/2
B670-2
B670-21/2
B670-3
B670-31/2
B670-4
3/8
32
58
64
70
77
93
105
143
164
190
205
(10)
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
1/2
3/4
1
11/4
11/2
2
21/2
3
31/2
4
(14.5)
(26.3)
(29.0)
(31.7)
(34.9)
(42.2)
(47.6)
(64.8)
(74.4)
(86.2)
(93.0)
Part
Number
Pipe or Conduit
Wt./C
Size
Lbs.
kg
B671-1/2
B671-3/4
B671-1
B671-11/4
B671-11/2
B671-2
B671-21/2
B671-3
1/2
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
3/4
1
11/4
11/2
2
21/2
3
67
71
85
91
115
135
183
230
(30.4)
(32.2)
(38.5)
(41.3)
(52.1)
(61.2)
(83.0)
(104.3)
Part No.
B422-1/2
B422-3/4
B422-1
B422-11/4
B422-11/2
B422-2
B422-21/2
B422-3
B422-31/2
B422-4
Design Load
Vertical Pull
Conduit
Size
1/2
3/4
1
11/4
11/2
2
21/2
3
31/2
4
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
A
23/8
23/8
27/8
27/8
31/4
311/16
41/4
47/8
57/16
(60.3)
(60.3)
(73.0)
(73.0)
(82.5)
(93.7)
(107.9)
(123.8)
(138.1)
(152.4)
Lbs.
kg
Lbs.
kg
250
300
400
400
500
600
700
800
900
1000
(1.11)
(1.33)
(1.78)
(1.78)
(2.22)
(2.67)
(3.11)
(3.56)
(4.00)
(4.45)
38
39
48
50
59
75
98
111
123
135
(17.2)
(17.7)
(21.8)
(22.7)
(26.7)
(34.0)
(44.4)
(50.3)
(55.8)
(61.2)
3/8
(9.5)
B3367S
RETAINING STRAP
x 1/2
Wt./C
B3367S-1
U-Bolt and
Hex Nuts
Design Load
Vertical Pull
13 Gauge
(2.3)
(12.7)
Slots
L
21/4
(57.1)
Part No.
B3367S-1-L
B3367S-2-L
Hole Dia.
D
7/16 (30.1)
9/16 (30.1)
Wt./C**
For Use
With
B422-1/2
Lbs.
3/4
&
B422-1, 11/4 & 11/2
kg
33.4 (5.8)
12.8 (15.1)
B3367S-2
12 Gauge
3/8 Dia.
(19.0)
(2.6)
Reference page 126 for general fitting and standard finish specifications.
140
Pipe Clamps
B2301 SERIES
ONE HOLE EMT STRAP
Hole Dia.
Standard finish: ZN
W
T
Part
No.
1/2
(15)
3/4
(20)
1
1
1 /4
11/2
2
(25)
.050
.050
.050
.065
.090
.090
(32)
(40)
(50)
Hole
Dia.
Wt./C
(1.3)
3/4
(19.0)
9/32
(7.1)
(1.3)
7/8
(22.2)
9/32
(7.1)
(1.3)
1
1
1 /4
1
11/4
(25.4)
9/32
(7.1)
(31.7)
9/32
(7.1)
(25.4)
11/32
(8.7)
(31.7)
13/32
(10.3)
(1.6)
(2.3)
(2.3)
Lbs.
kg
2.4
4.2
8.3
11.0
14.8
21.6
(1.1)
(1.9)
(3.7)
(5.0)
B2301-1/2
B2301-3/4
B2301-1
B2301-11/4
B2301-11/2
B2301-2
Conduit
Size
(6.7)
(9.8)
B2302 SERIES
ONE HOLE RIGID CONDUIT/PIPE STRAP
Standard finish: ZN
Part
No.
Conduit/Pipe
Size
B2302-1/4
1/4
(6)
B2302-3/8
B2302-1/2
B2302-3/4
B2302-1
B2302-11/4
B2302-11/2
B2302-2
B2302-21/2
B2302-3
B2302-31/2
B2302-4
3/8
(10)
1/2
(15)
3/4
(20)
1
(25)
11/4 (32)
11/2 (40)
2
(50)
21/2 (65)
3
(80)
31/2 (90)
4 (100)
T
.045
.050
.050
.050
.065
.065
11 Ga.
11 Ga.
7 Ga.
7 Ga.
1/4
1/4
Hole
Dia.
W
(1.1)
5/8
(1.3)
3/4
(1.3)
Wt./C
Lbs.
(15.9)
13/64
(5.1)
(19.0)
9/32
(7.1)
7/8
(22.2)
9/32
(7.1)
(1.3)
7/8
(22.2)
9/32
(7.1)
(1.6)
1
11/4
1
1
1 /4
11/4
11/4
11/4
11/4
(25.4)
9/32
(7.1)
(31.7)
21/64
(8.3)
(25.4)
.380
.389
.665
.650
.622
.630
(9.6)
(1.6)
(3.0)
(3.0)
(4.5)
(4.5)
(6.3)
(6.3)
(31.7)
(31.7)
(31.7)
(31.7)
(31.7)
(9.9)
(16.9)
(16.5)
(15.8)
(16.0)
1.4
2.4
3.3
3.8
7.2
11.0
19.2
28.8
55.2
68.0
96.0
108.0
kg
(.6)
(1.1)
Hole Dia.
(1.5)
(1.7)
(3.2)
(5.0)
(8.7)
(13.0)
(25.0)
(30.8)
(43.5)
(49.0)
9/32 (7.1)
Dia.
Wt./C
Part No.
B2084
B2085
B2086
B2087
B2088
B2089
B2090
B2091
O.D. Size
1/4
(6.3)
7/8
(22.2)
5/16
(7.9)
29/32
(23.0)
(9.5)
31/32
(24.6)
1/2
(12.7)
11/16
(25.9)
5/8
(15.9)
(19.0)
7/8
(22.2)
(25.4)
13/32
15/32
17/32
19/32
(27.8)
3/4
3/8
(29.1)
(30.7)
(32.2)
Lbs.
kg
4.0
4.2
5.2
5.8
7.1
7.7
8.7
10.0
(1.8)
(1.9)
(2.3)
3/8
(9.5)
15/8
(41.3)
(2.6)
(3.2)
(3.5)
(3.9)
(4.5)
Reference page 126 for general fitting and standard finish specifications.
141
O.D.
Size
Pipe Clamps
Design Load
BL1400 SERIES
CONDUIT HANGER
Safety Factor of 3
Unless noted all sizes fit both rigid (R) and thinwall (EMT) conduit
Hardware included
Standard finishes: ZN, SS4
Conduit Size
A
T
Hole Size B
Part No
Conduit
Size
Design Load
A
1/2
29/32 (23.0)
BL1400
(15)
3
31/32 (24.6)
BL1410
/4
(20)
BL1420
1
(25)
11/4 (31.7)
1
BL1425
1 /4 EMT
(32)
11/4 (31.7)
1
1
BL1430 1 /4 R,1 /2 EMT (32) 113/32 (35.7)
BL1440
11/2 R
(40)
15/8 (41.3)
BL1450
2
(50) 21/16 (47.6)
BL1460
21/2
(65) 21/16 (52.4)
BL1470
3
(80)
21/2 (63.5)
1
BL1480
3 /2
(90)
23/4 (69.8)
BL1490
4
(100) 31/2 (88.9)
Lbs.
9/32
3/4
(19.0)
9/32
3/4
(19.0)
9/32
3/4
(19.0)
9/32
7/8
(22.2)
9/32
7/8
(22.2)
1
11/4
11/4
11/4
11/4
11/4
(25.4)
11/32 (8.7)
11/32 (8.7)
11/32 (8.7)
11/32 (8.7)
11/32 (8.7)
11/32 (8.7)
B3373 SERIES
16
16
16
16
16
16
Ga.
Ga.
Ga.
Ga.
Ga.
Ga.
(1.5)
(1.5)
(1.5)
(1.5)
(1.5)
(1.5)
(31.7)
(31.7)
(31.7)
(31.7)
(31.7)
590
590
590
590
590
755
755
755
820
850
1410
Lbs.
kg
(2.62)
6
7
8
10
10
17
25
26
33
36
40
(2.7)
(2.62)
(2.62)
(2.62)
(2.62)
(3.36)
(3.36)
(3.36)
(3.65)
(3.78)
(6.27)
Pipe Size
RISER CLAMP
T
W
Part No.
Pipe
Size
Design Load
A
B3373-1/2
1/2
(15)
B3373-3/4
B3373-1
B3373-11/4
B3373-11/2
B3373-2
B3373-21/2
B3373-3
B3373-31/2
B3373-4
B3373-5
B3373-6
B3373-8
3/4
(20)
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
(25)
(32)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(100)
(100)
9
91/4
99/16
10
101/4
103/4
111/4
1115/16
123/8
127/8
14
153/16
173/4
(228.6)
(234.9)
(242.9)
(254.0)
(260.3)
(273.0)
(285.7)
(303.2)
(314.3)
(327.0)
(355.6)
(385.8)
(450.8)
Wt./C
Lbs.
kN
Lbs.
kg
255
255
255
255
255
255
390
530
670
810
1160
1570
2500
(1.13)
101
105
109
112
113
165
180
195
217
228
480
526
957
(45.9)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.73)
(2.36)
(2.98)
(3.60)
(5.16)
(6.98)
(11.12)
Reference page 126 for general fitting and standard finish specifications.
142
Wt./C
kN
(47.7)
(49.4)
(50.9)
(51.1)
(75.0)
(81.6)
(88.4)
(98.5)
(103.5)
(217.7)
(238.6)
(434.1)
(3.2)
(3.6)
(4.5)
(4.5)
(7.7)
(11.3)
(11.8)
(14.9)
(16.3)
(18.1)
Pipe Hangers
B3690 SERIES
ADJUSTABLE J HANGER
Safety Factor of 5
Material:
12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield
11 Ga. (3.0) ASTM A1011 HSLA Gr. 50 Class 1
7 Ga. (4.5) ASTM A1011 33,000 PSI min. yield and
1/4 (6.3) ASTM A1018 33,000 PSI min. yield
Standard finish: ZN
A
DIA.
Rod Take-Out
E Diameter. Is
For Wall Mounting
TxW
Felt Line
B3690F-SIZE
Design Load
Design Load
Part No.
B3690-1/2
B3690-3/4
B3690-1
B3690-11/4
B3690-11/2
B3690-2
B3690-21/2
B3690-3
B3690-31/2
B3690-4
B3690-5
B3690-6
B3690-8
Pipe or
Conduit Size
1/2
(15)
13/32
(10.3)
3/4
(20)
13/32
(10.3)
(25)
13/32
(32)
13/32
(40)
13/32
(50)
13/32
(10.3)
(65)
9/16
(14.3)
(80)
9/16
(14.3)
(90)
9/16
(14.3)
(100)
11/16
(17.5)
(125)
11/16
(150)
13/16
(200)
13/16
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
(10.3)
(10.3)
(10.3)
(17.5)
(20.6)
(20.6)
23/32
211/32
219/32
213/16
31/16
31/2
47/16
47/8
53/16
61/8
63/4
73/4
91/4
C
(53.2)
(59.5)
(65.9)
(71.4)
(77.8)
(88.9)
(112.7)
(123.8)
(131.8)
(155.6)
(171.4)
(196.8)
(235.0)
1
1
1
1
1
1
1
1
1
11/4
11/2
13/16
1
115/16 (49.2)
13/32
(50.4)
13/32
(10.3) 1/4-20 x 3
(10.3) 1/4-20 x 31/4
(25.4)
(25.4)
(25.4)
21/8
(53.7)
13/32
(25.4)
25/16
(58.7)
13/32
(25.4)
3
31/8
33/16
37/8
4
47/16
415/16
(76.2)
9/16
(79.4)
9/16
(14.3) 3/8-16 x 5
(81.0)
9/16
(98.4)
9/16
(100.8)
9/16
(112.7)
9/16
(125.4)
9/16
(25.4)
(25.4)
(31.8)
(38.1)
(30.2)
(25.4)
Wt./C
Design Load
Part No.
B3690-1/2
B3690-3/4
B3690-1
B3690-11/4
B3690-11/2
B3690-2
B3690-21/2
B3690-3
B3690-31/2
B3690-4
B3690-5
B3690-6
B3690-8
T
12 Ga.
12 Ga.
12 Ga.
12 Ga.
12 Ga.
12 Ga.
11 Ga.
11 Ga.
11 Ga.
7 Ga.
7 Ga.
1/4
1/4
W
(2.6)
3/4
(19.0)
(2.6)
3/4
(19.0)
(2.6)
3/4
(19.0)
(2.6)
3/4
(19.0)
(2.6)
3/4
(19.0)
(2.6)
3/4
(19.0)
(3.0)
11/4
11/4
11/4
11/4
11/4
11/4
11/2
(31.7)
(3.0)
(3.0)
(4.5)
(4.5)
(6.3)
(6.3)
(31.7)
(31.7)
(31.7)
(31.7)
(31.7)
(38.1)
Lbs.
kN
Lbs.
kg
400
400
400
400
400
400
800
800
800
800
800
1000
1200
(1.78)
20
23
24
27
29
32
71
77
84
139
166
226
332
(9.1)
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(3.56)
(3.56)
(3.56)
(3.56)
(3.56)
(4.45)
(5.34)
Reference page 126 for general fitting and standard finish specifications.
143
(10.4)
(10.9)
(12.2)
(13.1)
(14.5)
(32.2)
(34.9)
(38.1)
(63.0)
(75.3)
(102.5)
(150.6)
Pipe Hangers
B386 SERIES
A Dia.
Safety Factor of 3
Includes Hex Head Cap Screws and Hex Nuts
Standard finishes: ZN, GRN
C
W
B
Design Load
Wt./C
Design Load
Part No.
Pipe Size
B386-3/4
3/4
(20)
7/16
1
11/4
11/2
2
1
2 /2
3
31/2
4
5
6
8
(25)
7/16
(11.1) 35/16
(11.1) 33/4
(32)
7/16
(11.1)
(40)
7/16
(11.1)
(50)
7/16
(11.1)
(65)
9/16 (14.3)
9/16 (14.3)
B386-1
B386-11/4
B386-11/2
B386-2
B386-21/2
B386-3
B386-31/2
B386-4
B386-5
B386-6
B386-8
(80)
(90)
(100)
4
45/16
51/2
63/8
7
79/16
85/8
93/4
115/8
137/8
9/16 (14.3)
9/16 (14.3)
C
23/16
(95.2) 25/16
(55.6)
1/8
(3.2)
(58.7)
1/8
(3.2)
1/8
(3.2)
1/8
(3.2)
(139.7) 35/16
(84.1)
1/4
(6.3)
31/2
(88.9)
1/4
(6.3)
(177.8) 37/8
(98.4)
1/4
(6.3)
1/4
(6.3)
1/4
(6.3)
1/4
(6.3)
3/8
(9.5)
3/8
(9.5)
(84.1)
(161.9)
1
1
1
1
1
1
1
1
11/4
11/4
11/2
11/2
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(31.7)
(31.7)
(38.1)
(38.1)
B394 SERIES
Lbs.
kN
Lbs.
kg
730
730
730
730
730
1350
1350
1350
1350
2160
2160
3230
(3.25)
46
51
52
54
134
157
168
197
270
308
609
713
(20.8)
(3.25)
(3.25)
(3.25)
(3.25)
(6.00)
(6.00)
(6.00)
(6.00)
(9.61)
(9.61)
(14.37)
(23.1)
(23.6)
(24.5)
(60.8)
(71.2)
(76.2)
(89.3)
(122.4)
(139.7)
(276.4)
(323.4)
B Dia.
PIPE STRAP
Safety Factor of 3
Includes:
1 Pair Pipe Clamps with Hex Head Cap Screws and Hex Nuts
1 Hanger Strap
Standard finishes: ZN
T
Clamp
Only
Pipe Size
W
Clamp
Only
Design Load
Design Load
Part No.
B394-3/4
B394-1
B394-11/4
B394-11/2
B394-2
B394-21/2
B394-3
B394-31/2
B394-4
B394-5
B394-6
B394-8
Pipe
3/4
1
1
1 /4
11/2
2
21/2
3
31/2
4
5
6
8
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
Size
35/16
33/4
4
45/16
51/2
63/8
7
79/16
85/8
93/4
115/8
137/8
(84.1)
7/16
(11.1)
1/8
(3.2)
(95.2)
7/16
(11.1)
1/8
(3.2)
(101.6)
7/16
(11.1)
1/8
(3.2)
(109.5)
7/16
(11.1)
1/8
(3.2)
(139.7)
7/16
(11.1)
1/4
(6.3)
(161.9)
9/16
(14.3)
1/4
(6.3)
(177.8)
9/16
(14.3)
1/4
(6.3)
(192.1)
9/16
(14.3)
1/4
(6.3)
(219.1)
11/16
(17.4)
1/4
(6.3)
(247.6)
(17.4)
1/4
(6.3)
(295.3)
11/16
13/16
(20.6)
3/8
(9.5)
(352.4)
13/16
(20.6)
3/8
(9.5)
1
1
1
1
1
1
1
1
11/4
11/4
11/2
11/2
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(25.4)
(31.7)
(31.7)
(38.1)
(38.1)
kN
Lbs.
kg
500
500
500
800
1040
1040
1040
1040
1040
1040
1615
1615
(2.22)
71
76
77
79
166
179
190
203
320
353
637
837
(32.2)
(2.22)
(2.22)
(3.56)
(4.62)
(4.62)
(4.62)
(4.62)
(4.62)
(4.62)
(7.18)
(7.18)
Reference page 126 for general fitting and standard finish specifications.
144
Wt./C
Lbs.
(34.5)
(34.9)
(35.8)
(75.3)
(81.2)
(86.2)
(92.1)
(145.1)
(160.1)
(288.9)
(379.6)
Pipe Brackets
B591 SERIES
PIPE BRACKET SADDLE AND CLAMP
Safety Factor of 3
Inside brace not required on B591-2 and B591-21/2
Includes:
1 pc. Saddle bottom
1 pc. Saddle top (clamp)
2 pcs. Hex Head Cap Screws
2 pcs. Hex Nuts
Standard finish: ZN
113/16
(30.1)
Pipe Size
1/4
(6.3)
B D
W
A
Pipe/Conduit Clamps &
Hangers
Design Load
Wt./C
Design Load
Part No.
B591-2
B591-21/2
B591-3
B591-31/2
B591-4
B591-5
B591-6
B591-8
Pipe Size
2
(50)
21/2
(65)
3
31/2
4
5
6
8
(80)
(90)
(100)
(125)
(150)
(200)
A
41/2
5
51/2
6
61/2
71/2
8
9
(114.3)
(127.0)
(139.7)
(152.4)
(165.1)
(190.5)
(203.2)
(228.6)
B
41/2
5
53/4
63/4
63/4
8
83/4
101/2
91/2
101/4
121/8
133/16
159/16
(241.3)
(260.3)
(308.0)
(335.0)
(395.3)
D
31/16
39/16
313/16
49/16
61/16
61/16
613/16
89/16
W
(77.8) 15/8 (41.3)
(90.5)
(96.8)
15/8 (41.3)
15/8 (41.3)
(50.8)
Lbs.
kN
Lbs.
kg
1235
1180
1125
1070
1015
960
905
850
(5.53)
290
330
439
490
545
666
724
1087
(131.5)
Reference page 126 for general fitting and standard finish specifications.
145
(5.29)
(5.04)
(4.79)
(4.55)
(4.30)
(4.05)
(3.81)
(149.7)
(199.1)
(222.2)
(247.2)
(302.1)
(328.4)
(493.0)
Pipe Block
B356
PIPE BLOCK-2 (50) TO 8 (200) PIPE
1
(25.4)
31/16
(77.8)
Reference page 126 for general fitting and standard finish specifications.
146
Pipe Rollers
B218
25/8
(66.7)
(15)
3/4
(20)
(25)
11/4
(32)
11/2
2
21/2
3
31/2
4
5
6
8
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
0 (0.0)
71/4
71/4
71/4
71/4
71/4
71/4
71/4
71/4
71/4
75/8
81/2
9
10
1 (25.4)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(184.1)
(193.7)
(215.9)
(228.6)
(254.0)
71/4
71/4
71/4
75/8
75/8
8
81/2
81/2
9
9
10
11
(184.1)
(184.1)
(184.1)
(193.7)
(193.7)
(203.2)
(215.9)
(215.9)
(228.6)
(228.6)
(254.0)
(279.4)
11/2 (38.1)
75/8
75/8
8
8
81/2
81/2
9
9
9
10
10
11
2 (50.8)
(193.7)
(193.7)
(203.2)
(203.2)
(215.9)
(215.9)
(228.6)
(228.6)
(228.6)
(254.0)
(254.0)
(279.4)
8
81/4
81/4
81/2
81/2
9
9
10
10
10
11
11
(203.2)
(209.5)
(209.5)
(215.9)
(215.9)
(228.6)
(228.6)
(254.0)
(254.0)
(254.0)
(279.4)
(279.4)
21/2 (63.5)
9
9
10
10
10
10
11
11
12
(228.6)
(228.6)
(254.0)
(254.0)
(254.0)
(254.0)
(279.4)
(279.4)
(304.8)
3 (76.2)
10
10
11
11
11
(254.0)
(254.0)
(279.4)
(279.4)
(279.4)
4 (101.6)
12
12
(304.8)
(304.8)
(15)
3/4
(20)
(25)
11/4
(32)
11/2
2
21/2
3
31/2
4
5
6
8
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
0 (0.0)
211/16
213/16
215/16
31/8
31/4
39/16
313/16
41/8
43/8
45/8
5
1
5 /2
615/16
1 (25.4)
(68.3)
(71.4)
(74.6)
(79.4)
(82.5)
(90.5)
(96.8)
(104.8)
(111.1)
(117.5)
(127.0)
(139.7)
(160.3)
37/8
43/16
43/16
43/8
411/16
47/8
51/16
55/16
59/16
61/16
67/16
73/8
(98.4)
(106.4)
(106.4)
(111.1)
(119.1)
(123.8)
(128.6)
(134.9)
(141.3)
(154.0)
(163.5)
(187.3)
11/2 (38.1)
43/8
411/16
45/8
47/8
51/16
55/16
59/16
513/16
61/16
67/16
615/16
715/16
2 (50.8)
(111.1)
(119.1)
(117.5)
(123.8)
(128.6)
(134.9)
(141.3)
(147.6)
(154.0)
(163.5)
(176.2)
(201.6)
47/8
51/16
51/8
55/16
55/8
6
61/8
61/4
67/16
7
3
7 /8
87/16
(123.8)
(128.6)
(130.2)
(134.9)
(142.9)
(152.4)
(155.6)
(158.7)
(163.5)
(177.8)
(187.3)
(214.3)
21/2 (63.5)
53/4
61/16
63/8
67/16
611/16
615/16
73/8
715/16
815/16
(146.0)
(154.0)
(161.9)
(163.5)
(169.9)
(176.2)
(187.3)
(201.6)
(227.0)
3 (76.2)
7
71/4
73/8
77/8
81/2
Reference page 126 for general fitting and standard finish specifications.
147
(177.8)
(184.1)
(187.3)
(200.0)
(215.9)
4 (101.6)
813/16 (223.8)
91/2 (241.3)
23/8
(60.3)
Pipe Rollers
B219
25/8
(66.7)
A
23/8
(60.3)
REFERENCE CHART - A DIMENSION
Wt./C PR
Part No.
B219
B219-1
B219-2
B219-3
B219-4
B219-5
A
71/4
8
9
10
107/8
115/8
(184.1)
(203.2)
(228.6)
(254.0)
(276.2)
(295.3)
Lbs.
kg
253
258
263
269
274
279
(114.7)
(117.0)
(119.3)
(122.0)
(124.8)
(126.5)
1
11/4
11/2
2
21/2
3
1
3 /2
4
5
6
8
10
12
0 (0.0)
211/16
(20) 213/16
(25) 215/16
(32)
31/8
(40)
31/4
(50)
39/16
(65)
33/4
(80)
41/8
(90)
41/4
(100) 49/16
(125) 51/16
(150) 57/16
(200)
63/8
(250) 75/16
(300) 81/4
(15)
1 (25.4)
(68.3)
(71.4)
(74.6)
(79.4)
(82.5)
(90.5)
(95.2)
(104.8)
(107.9)
(115.9)
(128.6)
(138.1)
(161.9)
(185.7)
(209.5)
37/8
43/16
43/16
47/16
45/8
47/8
51/8
51/4
51/2
61/16
67/16
77/16
83/16
(98.4)
(106.4)
(106.4)
(112.7)
(117.5)
(123.8)
(130.2)
(133.3)
(139.7)
(154.0)
(163.5)
(188.9)
(208.0)
11/2 (38.1)
41/2
45/8
45/8
47/8
53/16
51/4
59/16
513/16
61/16
67/16
615/16
715/16
2 (50.8)
(114.3)
(117.5)
(117.5)
(123.8)
(131.8)
(133.3)
(141.3)
(147.6)
(154.0)
(163.5)
(176.2)
(201.6)
47/8
51/16
51/8
51/4
51/2
6
61/16
61/4
67/16
7
73/8
83/8
(123.8)
(128.6)
(130.2)
(133.3)
(139.7)
(152.4)
(154.0)
(158.7)
(163.5)
(177.8)
(187.3)
(212.7)
21/2 (63.5)
53/4
61/16
63/8
67/16
611/16
615/16
73/8
77/8
9
(146.0)
(154.0)
(161.9)
(163.5)
(169.9)
(176.2)
(187.3)
(200.0)
(228.6)
3 (76.2)
615/16
71/16
73/8
77/8
815/16
Reference page 126 for general fitting and standard finish specifications.
148
(176.2)
(179.4)
(187.3)
(200.0)
(211.1)
4 (101.6)
815/16 (227.0)
99/16 (242.9)
Pipe Rollers
B219 SIZING CHART
0 (0.0)
1 (25.4)
1/2
B219
B219
B219
B219
B219
B219
B219
B219
B219-1
B219-1
B219-1
B219-2
B219-3
B219-4
B219-5
B219
B219
B219
B219
B219-1
B219-1
B219-1
B219-2
B219-2
B219-2
B219-3
B219-4
B219-5
3/4
1
11/4
11/2
2
1
2 /2
3
31/2
4
5
6
8
10
12
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
B219
B219-1
B219-1
B219-1
B219-1
B219-2
B219-2
B219-2
B219-2
B219-3
B219-3
B219-4
B219-1
B219-1
B219-1
B219-2
B219-2
B219-2
B219-2
B219-3
B219-3
B219-3
B219-4
B219-5
B219-2
B219-2
B219-3
B219-3
B219-3
B219-3
B219-4
B219-4
B219-5
3 (76.2)
B219-3
B219-4
B219-4
B219-4
B219-5
Reference page 126 for general fitting and standard finish specifications.
149
4 (101.6)
B219-5
B219-5
Pipe Size
Pipe Rollers
B379
PIPE ROLLERS-6 (150) TO 18 (450) PIPE
4
(101.6)
(150)
(200)
(250)
(300)
(350)
(400)
(450)
0 (0.0)
99/16
101/4
11
1111/16
121/16
123/4
131/2
1 (25.4)
(242.9)
(260.3)
(279.4)
(296.9)
(306.4)
(323.8)
(342.9)
103/16
111/16
113/4
129/16
127/8
131/2
141/4
11/2 (38.1)
2 (50.8)
11
113/4
121/2
131/4
139/16
1413/16
15
(279.4)
21/2 (63.5)
113/8 (288.9)
137/8 (352.4)
(360.4) 141/2 (368.3)
(381.0) 155/16 (388.9)
(344.5)
3 (76.2)
113/4
121/2
131/8
137/8
141/4
147/8
155/8
(298.4)
(317.5)
(333.4)
(352.4)
(361.9)
(377.8)
(396.9)
4 (101.6)
121/2
131/4
137/8
145/8
147/8
151/2
165/16
(317.5)
(336.5)
(352.4)
(371.5)
(377.8)
(393.7)
(414.3)
(150)
(200)
(250)
(300)
(350)
(400)
(450)
0 (0.0)
67/8
713/16
813/16
93/4
105/16
115/16
121/4
1 (25.4)
(174.6)
(198.4)
(223.8)
(247.6)
(261.9)
(287.3)
(311.1)
77/8
87/8
97/8
1015/16
113/8
125/16
131/4
83/8
(225.4) 93/8
(250.8) 107/16
(277.8) 113/8
(288.9) 117/8
(312.7) 1213/16
(336.5) 133/4
(200.0)
(212.7)
(238.1)
(265.1)
(288.9)
(301.6)
(325.4)
(349.2)
87/8
97/8
1015/16
117/8
125/16
131/4
143/16
(225.4)
(250.8)
(277.8)
(301.6)
(312.7)
(336.5)
(360.4)
93/8
107/16
113/8
125/16
1213/16
133/4
1411/16
(238.1)
(265.1)
(228.9)
(312.7)
(325.4)
(349.2)
(373.1)
3 (76.2)
97/8
1015/16
117/8
1213/16
131/4
141/4
151/8
Reference page 126 for general fitting and standard finish specifications.
150
4 (101.6)
117/8 (301.6)
1213/16 (325.4)
133/4 (349.2)
141/4 (361.9)
151/8 (384.2)
161/16 (408.0)
Pipe Rollers
B479
PIPE ROLLERS-16 (400) TO 30 (750) PIPE
4
(101.6)
A
213/16
(71.4)
(400)
(450)
(500)
(600)
(750)
0 (0.0)
153/16
151/2
16
1613/16
1713/16
1 (25.4)
(385.8)
(393.7)
(406.4)
(427.0)
(452.4)
155/8
16
163/8
175/16
181/4
(396.9)
(406.4)
(415.9)
(439.7)
(463.5)
(403.2)
(411.2)
(420.7)
(444.5)
(466.7)
16
163/8
167/8
171/2
189/16
(406.4)
(415.9)
(428.6)
(444.5)
(471.5)
161/4
169/16
1615/16
1711/16
187/8
(412.7)
(420.7)
(430.2)
(449.3)
(476.2)
3 (76.2)
161/2
163/4
173/16
177/8
187/8
(419.1)
4 (101.6)
17
(431.8)
0 (0.0)
1013/16
117/8
(500) 123/16
(600) 1413/16
(750) 1713/16
1 (25.4)
(400)
(450)
157/8
(452.4)
187/8 (479.4)
(403.2)
11/2 (38.1)
123/8
137/16
147/16
163/8
193/8
2 (50.8)
(377.8)
167/8
(428.6)
(492.1) 197/8
(504.8)
(415.9)
21/2 (63.5)
133/8
147/16
157/16
173/8
203/8
3 (76.2)
Reference page 126 for general fitting and standard finish specifications.
151
4 (101.6)
Metric
Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in millimeters.
152
In.
(mm)
Wt./Each
DBM
Load Rating
Lbs.
(kg)
Lbs.
(kN)
DBM
2.35
(1.07)
200
(0.89)
DBP
4.48
(2.03)
500
(2.22)
DBP
Wt./Each
(mm)
Lbs.
DB5
5 x 6 x 4.8
DB10
5 x 6 x 9.6
DB20
DB30
Load Rating
(kg)
Lbs.
(kN)
2.75
(125)
200
(0.89)
5.28
(2.39)
500
(2.22)
10.63
(4.82)
1000
(4.45)
15.99
(7.25)
1500
(6.67)
DB40
21.34
(9.68)
2000
(8.89)
DB48
26.70 (12.40)
2500
(11.12)
DB20
DB30
Wt./Each
Load Rating
Part No.
In.
(mm)
Lbs.
(kg)
Lbs.
(kN)
DB610
67/16 x 6 x 9.6
6.36
(2.88)
500
(2.22)
DB620
12.90
(5.85)
1000
(4.45)
DB630
67/16
19.45
(8.82)
1500
(6.67)
DB640
(11.79)
2000
(8.89)
DB648
(14.76)
2500
(11.12)
* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specifications.
153
DB610
DB620
DB630
Dura-Blok Supports
In.
DB10
DB10-36
Wt./Each
Part No.
In.
(mm)
Lbs.
(kg)
DB10-28
55/8 x 6 x 28
13.16
(5.97)
DB10-36
55/8
x 6 x 36
14.36
(6.51)
DB10-42
55/8 x 6 x 42
15.52
(7.04)
DB10-50
55/8
x 6 x 50
16.45
(7.46)
DB10-60
55/8 x 6 x 60
17.94
(8.14)
DB10-50
DBM SERIES
Dura-Blok Supports
DBM-1
DBM-2CT
Part No.
Clamp
Part No.
DBM-1/2CT
B3198HCT-1/2
DBM-3/4CT
B3198HCT-3/4
In.
(mm)
Height** Min.-Max.
In.
Wt./Each
(mm)
Lbs.
(kg)
(246.1-284.2)
2.75
(1.25)
2.76
(1.25)
(252.7-290.8)
2.84
(1.29)
DBM-11/4CT
B3198HCT-11/4
2.95
(1.34)
DBM-11/2CT
B3198HCT-11/2
2.96
(1.34)
DBM-2CT
B3198HCT-2
3.03
(1.37)
DBM-1/2
B3198H-1/2
(250.4-288.5)
2.78
(1.26)
DBM-3/4
B3198H-3/4
2.84
(1.29)
DBM-1
B3198H-1
2.86
(1.30)
DBM-11/4
B3198H-11/4
2.93
(1.33)
DBM-11/2
B3198H-11/2
2.99
(1.36)
B3198H-2
3.10
(1.41)
DBM-1CT
DBM-2
B3198HCT-1
* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specifications.
154
Wt./Each
Part No.
In.
(mm)
Lbs.
(kg)
DBE10-8
DBE10-12
DBE10-16
51/2-8 x 6 x 9.6
51/2-12 x 6 x 9.6
51/2-16 x 6 x 9.6
5.68
5.72
5.76
(2.58)
(2.59)
(2.61)
DBR SERIES
SUPPORT BASE WITH ROD RISERS & PIPE ROLL
In.
Dura-Blok Supports
Base with (2) 1/2 electro zinc all threaded rod risers and a
B3114-31/2 pipe roll with sockets - base is 4 (101.6mm) high x 6 (152.4mm)
wide x 9.6 (243.8mm) long. Overall height is 12 (304.8mm) from bottom of
base to contact point on roller.
Pipe roll & sockets for up to 31/2 (90) pipe sizes.
100% recycled rubber, UV resistant.
Load Rating 200 lbs. (0.89kN) (To increase load capacity use load distribution plate
CLDP10)
Dura-Blok DBR-Series support is designed to support pipe up to 31/2 (90) nominal
size where difference in elevation is required and longitudinal movement is
expected. The Dura-Blok is UV resistant and approved for installation on any type
of roofing material or other flat surfaces.
Wt./Each
(mm)
Lbs.
(kg)
8.20
(3.72)
CLDP10
LOAD DISTRIBUTION PLATE
11 ga. (3.0mm) steel plate with slots.
Dimensions: 15/8 (41.3mm) wide x 91/2 (241.3mm) long.
Dura-Blok CLDP10 load bearing stabilizer plate increases load ratings
for DBE Series and DBR Series by allowing the load from the threaded
rods to be distributed over the length of the base instead of the point
load where the rods attach to the base.
Thickness x Width x Length
Part No.
CLDP10
Wt./Each
In.
(mm)
Lbs.
(kg)
0.53
(0.24)
Retighten the hex nuts
with plate in place
* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specifications.
155
B + 4.5
(114mm)
Dura-Blok Supports
Height
DB2318DS
(overall)
Length
Width
(overall)
DB2924DS
DB5336DS
* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specifications.
156
(overall)
In.
(mm)
In.
(mm)
(343)
DB2318DS
10.56 to 20.75
(268 to 527)
131/2
DB2918DS
10.56 to 26.75
(268 to 679)
131/2
(343)
(343)
DB4118DS
10.56 to 38.75
(268 to 984)
131/2
DB5318DS
131/2
(343)
DB2324DS
10.56 to 20.75
(268 to 527)
191/2
(495)
DB2924DS
10.56 to 26.75
(268 to 679)
191/2
(495)
(495)
DB4124DS
10.56 to 38.75
(268 to 984)
191/2
DB5324DS
191/2
(495)
DB2336DS
10.56 to 20.75
(268 to 527)
311/2
(800)
DB2936DS
10.56 to 26.75
(268 to 679)
311/2
(800)
(800)
DB4136DS
10.56 to 38.75
(268 to 984)
311/2
DB5336DS
311/2
(800)
DB2348DS
10.56 to 20.75
(268 to 527)
431/2
(1105)
DB2948DS
10.56 to 26.75
(268 to 679)
431/2
(1105)
(1105)
(1105)
DB4148DS
10.56 to 38.75
(268 to 984)
431/2
DB5348DS
431/2
Width (overall)
In.
(mm)
In.
DB2318DS
23
(584)
255/8
(651)
(mm)
Length (overall)
In.
Wt./Each
(mm)
lbs.
(kg)
20.2
(513)
33.31
(15.11)
DB2918DS
29
(736)
255/8
(651)
20.2
(513)
35.00
(15.88)
DB4118DS
41
(1041)
255/8
(651)
20.2
(513)
38.40
(17.42)
DB5318DS
53
(1346)
255/8
(651)
20.2
(513)
41.80
(18.96)
DB2324DS
23
(584)
315/8
(803)
20.2
(513)
34.15
(15.49)
(803)
20.2
(513)
35.84
(16.26)
(803)
20.2
(513)
39.25
(17.80)
DB2924DS
29
(736)
315/8
DB4124DS
41
(1041)
315/8
DB5324DS
53
(1346)
315/8
(803)
20.2
(513)
42.65
(19.34)
DB2336DS
23
(584)
435/8
(1108)
20.2
(513)
35.84
(16.26)
(1108)
20.2
(513)
37.56
(17.03)
(1108)
20.2
(513)
40.95
(18.57)
DB2936DS
29
(736)
435/8
DB4136DS
41
(1041)
435/8
DB5336DS
53
(1346)
435/8
(1108)
20.2
(513)
44.34
(20.11)
DB2348DS
23
(584)
555/8
(1415)
20.2
(513)
37.55
(17.03)
DB2948DS
29
(736)
555/8
(1415)
20.2
(513)
39.25
(17.80)
DB4148DS
41
(1041)
555/8
(1415)
20.2
(513)
42.65
(19.34)
(1346)
555/8
(1415)
20.2
(513)
46.03
(20.88)
DB5348DS
53
157
Dura-Blok Supports
Height (overall)
Part No.
DBR4-6
DBR16-20
Roller
Part No.
Part No.
DBR2-31/2
31/2
B3126-2 to
Wt./Each
Load Rating
(mm)
In.
(mm)
Lbs.
(kg)
Lbs.
(kN)
5 x 6 x 9.6
7.09
(180)
5.28
(2.39)
500
(2.22)
DBR4-6
B3126-4 to 6
5 x 6 x 9.6
7.09
(180)
10.63
(4.82)
500
(2.22)
DBR8-10
B3126-8-10
5 x 6 x 20.2
8.34
(212)
15.99
(7.25)
1000
(4.45)
DBR12-14
B3126-12-14
5 x 6 x 20.2
9.38
(238)
21.34
(9.68)
1000
(4.45)
DBR16-20
B3126-16-20
5 x 6 x 20.2
9.78
(248)
26.70 (12.11)
1000
(4.45)
Dura-Blok Supports
Height**
In.
BTS
TN Nuts
B22SH
B22TH
HHCS
B2400
Series
B104
B101
B634
B-LINE
50
BVP1 I.P
I.P..
1 1/2
B2000 Series
B3124
Series
BVT Series
B218
B379
B219 Series
B3126 Series
B479
Above rollers can be mounted on DB Series, DB6 Series, and DB10 Series units 19 (482mm) or longer.
Reference page 152 for general fitting and standard finish specifications.
158
Dura-Blok Supports
159
Safety Grating is available with slip resistant Grate-Lock, helping provide a safe
walkway for foot traffic on the roof.
Dura-Blok Supports
Easy to install, elevated design, creates an identifiable path for foot traffic helping prevent
wear and tear to the roof surface.
The cross-over design offers safe passage over existing cabling, piping, cable tray or
any other interference on the rooftop.
The self cleaning pattern allows water and dirt to easily flow through, helping make the
grating an ideal walkway in all weather conditions.
Handrail options are available
160
Dura-Blok Supports
161
Electrical Accessories
A complete system of top quality, time saving
products, designed for surface metal raceways,
lighting and cable supports. Innovative designs
offer many installation advantages. Cooper
B-Lines surface raceways are U.L. listed and
meet the requirements of the National Electrical
Code, Article 352.
Surface Raceways
Cooper B-Lines channel provides structural
support in addition to a raceway system.
For U.L. wire fill see chart on page 230-231.
Cable Supports
A full range of clamps and saddles are offered in
porcelain, thermoplastic elastomer and maple.
Cooper B-Lines maple clamps, Insulclamp cable
clamps and porcelain saddles are furnished
complete with steel clamps (electro-plated) and
Everdur hardware where required.
Finish
Plain
ZN
GRN
GALV
YZN
Electro-Plated Zinc
Dura-Green
Pre-Galvanized
Yellow Zinc Chromate
Specification
ASTM A1011
33,000 PSI min. yield
ASTM B633 SC3 Type III
ASTM B653
ASTM B633 SC3 Type II
Electrical Accessories
Design Load
Design load data published includes a Safety Factor of 3.0 (Safety Factor = Ratio of ultimate load to
the design load).
U.L. listed raceway channels:
B32, B32KO6
B11, B11KO6
B12, B12KO6
B42, B42KO6
B22, B22KO6
B52, B52KO6
B24, B24KO6
B54, B54KO6
B26, B26KO6
B56, B56KO6
U.L. File No. E29637
In all cases, the snap-in closure strip is required to complete raceway enclosure.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
162
Electrical Accessories
(9)
(7)
(11)
(8)
(1)
(5)
(4)
(13)
(1)
(1) or
(1A) (Not Shown)
(6)
(10)
(13)
(3) or
(3A) (Not Shown)
(2)
3A
Channel
Hanger
Fixture
Hanger
End Cap
Connection
End Cap
Internal
Straight Splice
Internal
Tee Splice
(82.5) B616-22A*
B241S*
B616S-22A*
B205 or B285
B766-22 (2)
B768-22 (2)
B11
B12
B22
B24
B26
B241S*
B241S*
B768-11
B768-12
(41.3)
B616*
B216S*
B392-22**
B766-22
B768-22
15/8
(41.3)
B616*
B222
B221
B205 or B285
B223 or B286
B766-11
B766-12
15/8
B392-22**
B32
13/8
(34.9)
B616*
B216S*
B206
B392-32**
B766-32
B768-32
B42
(25.4)
B616*
B215S*
B203
B766-42
B768-42
B52
B54
13/16
(20.6)
B616*
B215S*
B220 or B283
B204 or B284
B766-52
B768-52
B56
13/16
(20.6)
B616*
B215S*
B616S-22A*
B616S-22A*
B616S*
B616TG*
B616S*
B616TG*
B616S*
B616TG*
B616S*
B616TG*
B616S*
B616TG*
B392-22**
B285
B392-11**
B392-12**
B766-56
Channel
Number
B22A
Depth
31/4
1
Channel
Hanger
(6) B351L
Beam Clamp
(10) B750
Beam Clamp
(7)
B755
Beam Clamp
(11) B447
B447A
(8) B751
Beam Clamp
(12) B719
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
163
(9)
(13)
Electrical Accessories
1A
SELECTION CHART
B616-7/8
CHANNEL HANGER
CHANNEL HANGER
11/2
(38.1)
11/2
(38.1)
31/8
(79.4)
31/8
(79.4)
B616S-9/16
B616S-7/8
FLUORESCENT FIXTURE
HANGER WITH STUD
FLUORESCENT FIXTURE
HANGER WITH STUD
11/2
(38.1)
Electrical Accessories
31/8
(79.4)
31/8
(79.4)
B616-22A-9/16
B616-22A-7/8
CHANNEL HANGER
CHANNEL HANGER
11/2
11/2
(38.1)
(38.1)
51/8
(130.2)
51/8
(130.2)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
164
B616S-22A-7/8
FLUORESCENT FIXTURE
HANGER WITH STUD
FLUORESCENT FIXTURE
HANGER WITH STUD
51/8
(130.2)
5 /8
(130.2)
B215S
B616TG-9/16
CHANNEL HANGER
FLUORESCENT FIXTURE
HANGER FOR 1/2 (15) KNOCKOUT
9/16 (14.3) Dia.
For 1/2 ATR
Can be used with 3/8 & 1/2 threaded rod or 3/8 & 1/2 conduit
Design Load 250 Lbs. (1.11 kN)
Safety Factor of 3
For use with B42, B52, B54 & B56 Channels
Hardware included:
One (1) 3/8 x 11/2 FFW for use with 3/8-16 ATR
One (1) 1/2 FW for use with 1/2-13 ATR
One (1) 5/8 FW for use with 3/8 conduit
7/8 (22.2) Dia.
Material: 16 Gauge (1.5)
Standard finish: ZN
Wt./C 31 Lbs. (14.0 kg)
23/16
(55.6)
121/32
(42.0)
B241S
CHANNEL HANGER
CHANNEL HANGER
Can be used with 3/8 & 1/2 threaded rod or 3/8 & 1/2 conduit
Design Load 250 Lbs. (1.11 kN)
Safety Factor of 3
For use with B11 & B12 Channels.
Hardware included:
One (1) 3/8 x 11/2 FFW for use with 3/8-16 ATR
One (1) 1/2 FW for use with 1/2-13 ATR
One (1) 5/8 FW for use with 3/8 conduit
Material: 16 Gauge (1.5)
7/8 (22.2) Dia.
Standard finish: ZN
Wt./C 47 Lbs. (21.3 kg)
51/16
(128.6)
31/2
(88.9)
121/32
121/32
(42.0)
(42.0)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
165
Electrical Accessories
B216S
B390BX
B465
B436
Standard finish: ZN
Wt./C 2 Lbs. (.9 kg)
21/8
(54.0)
Tapped For 1/4-20 Screw
21/16
B436S
(52.4)
Electrical Accessories
33/4
(95.2)
B460
B464
FLUORESCENT
FIXTURE HANGER
1/4
x 1 Round Head
Machine Screw and
Square Nut Included
15/8
(41.3)
Part No.
15/8
(41.3)
Wt./C
Wt./C
Lbs.
B460-22
B460-12
B460-11
x 1 Round Head
Machine Screw and
Square Nut Included
Square Hole
Part No.
1/4
9/32 (7.1)
11/4
(31.7)
kg
17 (7.7)
20 (9.1)
23 (10.4)
B464-32
B464-22
B464-12
B464-11
B32
B22, B24, B26
B12
B11
11/2
13/4
29/16
33/8
(40.6)
(47.4)
(66.0)
(91.4)
Lbs.
kg
17
18
21
24
(7.7)
(8.1)
(9.5)
(10.9)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
166
Electrical Accessories
B217-20
B217P
B217-24
17/16
113/32
(36.5)
(35.7)
17/16
(36.5)
19/32
(11.9)
1/2
(15.1)
15/32
9/32
5/8
(12.7)
(7.1)
(15.9)
B516
B516S
OUTLET BOX
41/16
1 /8
(47.6)
(103.2)
(54.0)
21/8
(54.0)
Concentric KOS
(152.4)
15/8
B217-20
Closure Strip
(41.3)
4
(101.6)
END CAPS
Part No.
B203
B204
B205
B206
B220
B221
B222
B223
Use With
B42
B54
B22
B32
B52
B12
B11
B24
Electrical Accessories
1.015
.827
1.640
1.390
.827
2.452
3.265
1.640
Wt./C
A
(25.8)
(21.0)
(41.6)
(35.3)
(21.0)
(62.3)
(82.9)
(41.6)
Lbs.
kg
6
5
10
8
4
15
20
10
(2.7)
(2.2)
(4.5)
Part No.
Use With
B283
B284
B285
B286
B52
B54 & B56
B22
B24 & B26
(3.6)
(1.8)
(6.8)
(9.1)
(4.5)
A
119/32
119/32
119/32
119/32
Wt./C
Lbs. kg
(2.7)
(2.7)
6
6
13
(40.5) 119/32 (40.5) 14
(5.9)
(6.3)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
167
Electrical Accessories
B447
B447A
CONDUIT CONNECTION
PLATE FOR 1/2 (15) CONDUIT
CONDUIT CONNECTION
PLATE FOR 3/4 (20) CONDUIT
Includes:
2 pcs. 1/4-20 Flat Head Machine Screws
2 pcs. N224WO Channel Nuts
Material: 16 Gauge (1.5)
2 Holes
Standard finish: ZN
9/32 (7.1) Dia.
Wt./C 35 Lbs. (15.9 kg)
Includes:
2 pcs. 1/4-20 Flat Head Machine Screws
2 pcs. N224WO Channel Nuts
Material: 16 Gauge (1.5)
2 Holes
Standard finish: ZN
Wt./C 35 Lbs. (15.9 kg) 9/32 (7.1) Dia.
5/8
(15.9)
5/8
(15.9)
51/8
(130.2)
51/8
(130.2)
B392-32 SERIES
B392-22 SERIES
Includes:
1 pc. 1/4-20 Square Nut
1 pc. B436S Fixture Stud Nut
Material: 11 Gauge (3.0)
Standard finish: ZN
Includes:
1 pc. 1/4-20 Square Nut
1 pc. B436S Fixture Stud Nut
Material: 11 Gauge (3.0)
15/8
Standard finish: ZN
(41.3)
15/8
(41.3)
9/32 (7.1) Dia.
A Dia.
13/8
(34.9)
15/8
(41.3)
9/32 (7.1) Dia.
A Dia.
3/4
(19.0)
3/4
(19.0)
Part No.
Wt./C
Part No.
Electrical Accessories
B392-32-1/2
B392-32-3/4
A
7/8
11/16
Conduit Size
(22.2)
1/2
(15)
(27.0)
3/4
(20)
Lbs.
kg
20
19
(9.1)
B392-22-1/2
B392-22-3/4
B392-22-1
(8.6)
Conduit
Size
A
7/8
11/16
1 PIPE THREAD
B392-12 SERIES
B392-11 SERIES
Includes:
1 pc. 1/4-20 Square Nut
1 pc. B436S Fixture Stud Nut
Material: 11 Gauge (3.0)
Standard finish: ZN
Includes:
1 pc. 1/4-20 Square Nut
1 pc. B436S Fixture Stud Nut
Material: 11 Gauge (3.0)
Standard finish: ZN
15/8
(41.3)
9/32 (7.1) Dia.
27/16
1/2
(22.2)
(27.0)
3/4
kg
21 (9.5)
20 (9.1)
17 (7.7)
15/8
(41.3)
9/32 (7.1) Dia.
A Dia.
31/4
(61.9)
(15)
(20)
(25)
Wt./C
Lbs.
A Dia.
(82.5)
3/4
3/4
(19.0)
(19.0)
Part No.
B392-12-1/2
B392-12-3/4
B392-12-1
A
7/8
(22.2)
11/16
(22.7)
1 PIPE THREAD
Conduit
Size
1/2
(15)
3/4
(20)
1
(25)
Wt./C
Lbs.
kg
27
26
23
(12.2)
(11.8)
(10.4)
Part No.
B392-11-1/2
B392-11-3/4
B392-11-1
A
7/8
(22.2)
11/16
(27.0)
1 PIPE THREAD
Wt./C
Conduit
Lbs. kg
Size
1/2
(15) 36 (16.3)
3/4
(20) 33 (14.9)
1
(25) 32 (14.5)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
168
Junction Boxes
B718
UNIVERSAL JUNCTION BOX
Assemble B719 Hubs into B718 square knockouts
Designed for use with B22, B24 & B26 Channel
B718 Includes:
1 pc. Junction Box only
1 pc. Cover only
2 pcs. #10-20 Round Head Machine Screws
Standard finish: ZN
Wt./C 180 Lbs. (81.6 kg)
B718-1 B718-2
B718-1
B718-2
B718-2
B718-2
END THRU BOX
90
B718-3
B718-3
TEE
B718-4
B718-4
CROSS
SELECTION GUIDE
Wt./C
Part No.
B718-1
B718-2
B718-3
B718-4
1
1
1
1
Includes
B718 & 1 B719
B718 & 2 B719
B718 & 3 B719
B718 & 4 B719
Lbs.
205
230
255
280
kg
Box Dimension:
21/2 Deep x 51/8 Square
(93.0)
(104.3)
(115.6)
(127.0)
B719AL
UNIVERSAL JUNCTION BOX HUB
B719AL Includes:
1 pc. B719AL Hub only
1 pc. B436S Fixture Stud Nut
1 pc. 1/4-20 Square Nut
2 pcs. #10-24 Self Tapping Screws
2 pcs. Rubber Caps
Material: Aluminum
Wt./C 25 Lbs. (11.3 kg)
B518-1
END
B518-2
THRU BOX
B518-2
90
B518-3
TEE
B518-4
CROSS
Part No.
B518-1
B518-2
B518-3
B518-4
Channel Connection
Kits Included
1
2
3
4
Wt./C
Lbs.
kg
106
137
162
192
(48.1)
(62.1)
(78.5)
(87.1)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
169
Electrical Accessories
SELECTION GUIDE
Strut Joiners
B766 SERIES
B767 SERIES
Note: B767-22
(Cast Aluminum Fitting)
41/2
(114.3)
7/8
25/16
(58.7)
(22.2)
Wt./C
Part No.
B766-11
B766-12
B766-22 *
B766-26
B766-32
B766-42
B766-52
B766-56
Lbs.
kg
94
72
50
53
44
34
28
31
(42.6)
(58.7)
Wt./C
Part No.
B767-11
B767-12
B767-22 *
B767-26
B767-32
B767-42
B767-52
B767-56
(32.6)
(22.7)
(24.0)
(19.9)
(15.4)
(12.7)
(14.0)
B768 SERIES
B769 SERIES
25/16
Lbs.
kg
74
56
39
41
34
27
23
25
(33.5)
(17.7)
(18.6)
(15.4)
(12.2)
(10.4)
(11.3)
41/2
(114.3)
41/2
(114.3)
Electrical Accessories
(25.4)
31/16
(77.8)
41/2
(114.3)
Wt./C
Part No.
B768-11
B768-12
B768-22 *
B768-26
B768-32
B768-42
B768-52
B768-56
Lbs.
kg
142
112
79
79
72
62
57
60
(64.4)
Wt./C
Part No.
B769-11
B769-12
B769-22 *
B769-26
B769-32
B769-42
B769-52
B769-56
(50.8)
(35.8)
(35.8)
(32.6)
(28.1)
(25.8)
(27.2)
Lbs.
kg
148
120
87
93
78
65
58
62
(67.1)
(54.4)
(39.4)
(42.2)
(35.4)
(29.5)
(26.3)
(28.1)
170
Strut Joiners
B166
B166-46
71/4
(184.1)
FOUR HOLE
SPLICE CLEVIS
FOUR HOLE
SPLICE CLEVIS ASSEMBLY
Includes:
1 Splice Clevis
4 pcs. 1/4-20 Flat Head
Machine Screws
4 pcs. N224WO Channel Nuts
Material: 16 Gauge
A
111/16
(42.9)
Wt./C
Part No.
A
31/4
27/16
15/8
13/8
1
13/16
B166-11
B166-12
B166-22
B166-32
B166-42
B166-52
(82.5)
(61.9)
(41.3)
(34.9)
(25.4)
(20.6)
71/4
(184.1)
Lbs.
kg
B11
B12
B22, B24, B26
B32
B42
B52, B54, B56
128
108
91
83
75
71
(58.0)
Part No.
(49.0)
(40.3)
(37.6)
(34.0)
(32.2)
B166-46-11
B166-46-12
B166-46-22
B166-46-32
B166-46-42
B166-46-52
111/16
(42.9)
Wt./C
For Channel Size Lbs. kg
A
31/4
27/16
15/8
13/8
1
13/16
(82.5)
(61.9)
(41.3)
(34.9)
(25.4)
(20.6)
B11
B12
B22, B24, B26
B32
B42
B52, B54, B56
118
98
79
73
65
61
(53.5)
(44.4)
(35.8)
(33.1)
(29.5)
(27.6)
B166CL
B466W
B466S
Includes:
4 pcs. 1/4-20 Flat Head Machine
Screws
Material: 14 Gauge (1.9)
Standard finish: ZN
Wt./C 27 Lbs. (12.2 kg)
Holes 13/16 (20.6) from ends and
17/8 (47.6) on centers
Includes:
4 pcs. 1/4-20 Square Nuts
Material: 14 Gauge (1.9)
Standard finish: ZN
Wt./C 34 Lbs. (15.4 kg)
Studs 13/16 (20.6) from ends and
17/8 (47.6) on centers
B393-1
B589
WIRING STUD
SPACER CLEVIS
B166
1
(25.4)
125/32
(45.2)
B619
Requires ground wire for use with UL
listed channel raceway system
Includes:
2 pcs. 1/4-20 Flat Head Machine
Screws
2 pcs. N224WO Channel Nuts
Material: 16 Gauge (1.5)
1/2 (15) Conduit Knockouts
Standard finish: ZN
Wt./C 40 Lbs. (18.1 kg)
61/4
(158.7)
Threads
(50.8)
4
(101.6)
11/8
(28.6)
121/32
(42.0)
1/2
(12.7)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
171
Electrical Accessories
KNOCK-OUT PLATE
Electrical Hardware
B446B
B446A
Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
Safety Factor of 3
Standard finish: ZN
Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
Safety Factor of 3
Standard finish: ZN
A
13/4
(44.4)
13/4
(44.4)
B
Wt./C
Part No.
Lbs.
B446B-3/8
3/8-16
9/32
(7.1)
B446B-1/2
B446B-5/8
B446B-3/4
1/2-13
3/8
(9.5)
15/32
(11.9)
9/16
(14.3)
HHCS
HHCS
5/8-11 HHCS
3/4-10 HHCS
Wt./C
Part No.
kg
16
20
42
60
(7.2)
B446A-3/8
3/8-16
9/32
(7.1)
(9.1)
B446A-1/2
B446A-5/8
B446A-3/4
1/2-13
3/8
(9.5)
15/32
(11.9)
9/16
(14.3)
(19.0)
(27.2)
HN
HN
5/8-11 HN
3/4-10 HN
B446
B446C
Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
Safety Factor of 3
Standard finish: ZN
Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
(5/8)-1810 Lbs. (8.05 kN)
(3/4)-2710 Lbs. (12.05 kN)
Safety Factor of 3
Standard finish: ZN
23/4
(69.8)
Lbs.
kg
13
15
34
45
(5.9)
(6.8)
(15.4)
(20.4)
23/4
(69.8)
A
1
Electrical Accessories
(25.4)
B
Wt./C
Wt./C
Part No.
B446-3/8
B446-1/2
B446-5/8
B446-3/4
A
3/8-16
HN
1/2-13 HN
5/8-11 HN
3/4-10 HN
B
3/8-16
HHCS
1/2-13 HHCS
5/8-11 HHCS
3/4-10 HHCS
Lbs.
kg
28
36
78
112
(12.7)
Part No.
B446C-3/8
B446C-1/2
B446C-5/8
B446C-3/4
(16.3)
(35.4)
(50.8)
A
3/8-16
HN
1/2-13 HN
5/8-11 HN
3/4-10 HN
B590
B617
SHOULDER BOLT
Standard finish: ZN
Wt./C 6 Lbs. (2.7 kg)
13/8
(34.9)
11/2
Lbs.
kg
26
31
68
90
(11.8)
(14.0)
(30.8)
(40.8)
(38.1)
(50.8)
1/32
(.8)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
172
Insulclamp Clamps
B4060 THRU B4093
INSULCLAMP CABLE CLAMPS (Replaces porcelain clamps)
Assembly includes:
1 Insulclamp & 1 pr. zinc plated Pipe Straps with Everdur (Silicon Bronze) Hardware
The thermoplastic elastomer Insulclamp has a dielectric strength of 640 volts/mil
The flame retardant one piece design allows for trouble free assembly
Everdur hardware is non-ferrous and prevents magnetic induction
Hole Dia.
Part No.
3/8
(9.5)
1/2
(12.7)
5/8
(15.9)
3/4
(19.0)
7/8
(22.2)
1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/8
21/4
23/8
21/2
25/8
23/4
27/8
3
31/8
31/4
33/8
31/2
35/8
33/4
37/8
4
41/8
41/4
43/8
41/2
(25.4)
(28.6)
(31.7)
(34.9)
(38.1)
(41.3)
(44.4)
(47.6)
(50.8)
(54.0)
(57.1)
(60.3)
(63.5)
(66.7)
(69.8)
(73.0)
(76.2)
(79.4)
(82.5)
(85.7)
(88.9)
(92.1)
(95.2)
(98.4)
(101.6)
(104.8)
(107.9)
(111.1)
(114.3)
Wt./C
Lbs.
kg
25
25
25
37
37
37
37
58
58
58
58
76
76
76
76
90
90
90
90
109
109
109
109
130
130
130
130
160
160
160
160
160
160
160
Includes
Clamp No.
(11.3)
(11.3)
1.36
(34.5)
.56
(14.2)
B2030
1.86
(47.2)
.81
(20.8)
B2011
2.36
(59.9)
1.06
(26.9)
B2038
2.86
(72.6)
1.31
(33.3)
B2042
3.36
(85.3)
1.56
(39.6)
B2046
3.86
(98.0)
1.81
(46.0)
B2050
4.36
(110.7)
2.06
(52.3)
B2054
4.86
(123.4)
2.31
(58.7)
B2058
5.24
(133.1)
2.50
(63.5)
B2018
(11.3)
(16.8)
(16.8)
(16.8)
(16.8)
(26.3)
(26.3)
(26.3)
(26.3)
(34.5)
(34.5)
(34.5)
(34.5)
(40.8)
(40.8)
(40.8)
(40.8)
(49.4)
(49.4)
(49.4)
(49.4)
(58.9)
(58.9)
(58.9)
(58.9)
(72.6)
(72.6)
(72.6)
(72.6)
(72.6)
(72.6)
(72.6)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
173
Electrical Accessories
B4060
B4061
B4062
B4063
B4064
B4065
B4066
B4067
B4068
B4069
B4070
B4071
B4072
B4073
B4074
B4075
B4076
B4077
B4078
B4079
B4080
B4081
B4082
B4083
B4084
B4085
B4086
B4087
B4088
B4089
B4090
B4091
B4092
B4093
Hole Dia.
PORCELAIN CABLE
CHANNEL SADDLE
PORCELAIN CABLE
RACK SADDLE
21/4
(76.2)
(57.1)
Wt./C
Wt./C
Part No.
A
3
4
B4050
B4051
Lbs.
Part No.
kg
(76.2)
13/8
(34.9)
(101.6)
21/8
72
B4094
B4095
(32.6)
27/8
(73.0)
37/8
(98.4)
Lbs.
13/8
(34.9) 67 (30.4)
21/8 (54.0) 106 (48.1)
Assembly Includes:
1 pr. Maple Clamps (Paraffin Impregnated)
3 pcs. 1/2 Flat Washers
3 pcs. N225WO
3 pcs. SQN-1/2
3 pcs. ATR-1/2 x L (Length)
Required number of Separators
1/4 (6.3) x 2 (50.8) and 1/4 (6.3) x 6 (152.4)
Bus Bar Maple Clamps available
47/16
(112.7)
15/8
Electrical Accessories
(41.3)
31/2
(88.9)
1/4
(6.3)
C
B
Part No.
B4035A
B4035B
B4035C
B4035D
B4035E
B4035F
73/8
(187.3)
81/2
91/2
101/2
111/2
121/2
131/2
C
(215.9)
1/4
(6.3)
(241.3)
3/4
(19.0)
(266.7)
11/4
13/4
21/4
23/4
(31.7)
(292.1)
(317.5)
(342.9)
(44.4)
(57.1)
(69.8)
No. of Bus
Separators
No. of Bars
Per Leg
Lbs.
Wt./C
kg
2
4
6
8
10
1
2
3
4
5
6
416
447
479
511
542
574
(188.7)
(202.7)
(217.3)
(231.8)
(245.8)
(260.3)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
174
kg
Maple Clamps
B4000 THRU B4007
MAPLE CABLE CLAMPS
Assembly Includes:
1 pr. Maple Clamps (Paraffin Impregnated)
1 pr. zinc plated Steel Pipe Straps with Everdur Hardware (Silicon Bronze)
Everdur hardware is non-ferrous and prevents magnetic induction
Note: Maple cable clamps may be replaced with Insulclamps see page 173 for sizes
Part No.
B4000
B4001
B4002
B4003
B4004
B4005
B4006
B4007
Clamp No.
Wt./C
(included) Lbs. kg
111/32 (34.1)
2
(50.8)
129/32 (48.4) 225/32 (70.6)
23/8
(60.3) 39/32 (83.3)
27/8
(73.0) 33/4 (95.2)
1
3 /2
(88.9) 43/8 (111.1)
4
(101.6) 47/8 (123.8)
41/2 (114.3) 53/8 (136.5)
59/16 (141.3) 67/16 (163.5)
B2010
B2012
B2013
B2014
B2015
B2016
B2017
B2019
24
44
58
66
86
110
125
165
(10.9)
(19.9)
(26.3)
(29.9)
(39.0)
(49.9)
(56.7)
(74.8)
15/8
(41.3)
Specify
Hole Dia.
Part No.
B4008
B4009
B4010
B4011
B4012
B4013
B4014
B4015
B4016
B4017
0 to 1
1 to 11/2
11/2 to 2
2 to 21/2
21/2 to 3
3 to 31/2
31/2 to 4
4 to 41/2
41/2 to 5
5 to 6
(0.0 to 25.4)
(25.4 to 38.1)
(38.1 to 50.8)
(50.8 to 63.5)
(63.5 to 76.2)
(76.2 to 88.9)
(88.9 to 101.6)
(101.6 to 114.3)
(114.3 to 127.0)
(127.0 to 152.4)
Wt./C
A
3
31/2
4
41/2
5
51/2
6
7
71/2
9
(76.2)
(88.9)
(101.6)
(114.3)
(127.0)
(139.7)
(152.4)
(177.8)
(190.5)
(228.6)
Lbs.
13/4 (44.4) 35
(50.8)
2
42
21/4 (57.1) 53
21/2 (63.5) 62
23/4 (69.8) 76
(76.2)
3
85
31/4 (82.5) 95
33/4 (95.2) 105
4 (101.6) 115
5 (127.0) 126
kg
(15.9)
(19.0)
(24.0)
(28.1)
(34.5)
(38.5)
(43.1)
(47.8)
(52.4)
(57.1)
15/8
(41.3)
Part No.
B4033A
B4033B
B4033C
B4033D
B4033E
B4033F
B4033G
B4033H
B4033I
Specify
Hole Dia.
0 to 1
1 to 11/2
11/2 to 2
2 to 21/2
21/2 to 3
3 to 31/2
31/2 to 4
4 to 41/2
41/2 to 5
(0.0 to 25.4)
(25.4 to 38.1)
(38.1 to 50.8)
(50.8 to 63.5)
(63.5 to 76.2)
(76.2 to 88.9)
(88.9 to 101.6)
(101.6 to 114.3)
(114.3 to 127.0)
Specify
Hole Dia.
Wt./C
A
31/2
4
41/2
51/2
6
61/2
7
71/2
8
Lbs.
(88.9)
(101.6)
(114.3)
(127.0)
(152.4)
(165.1)
(177.8)
(190.5)
(203.2)
85
95
118
162
187
209
248
270
298
kg
(38.5)
(43.1)
(53.5)
(73.5)
(84.8)
(94.8)
(112.5)
(122.5)
(135.2)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
175
Electrical Accessories
Aluminum
Aluminum channels, fittings and accessories offer
excellent corrosion resistance and are suitable for
many indoor and outdoor applications. Aluminums
high strength to weight ratio greatly reduces
overall cost of installation through ease of
handling and cutting. Cooper B-Lines channels
are extruded from aluminum alloy 6063-T6.
Closure strips are extruded from aluminum alloy
6063-T5. Fittings and accessories are made from
aluminum alloy 5052-H32.
Stainless Steel
Where corrosion problems persist and other
material and fittings are ineffective, we
recommend use of Cooper B-Lines corrosion
resistant stainless steel channels and
accessories. Channels and fittings are available
in two types of stainless steel:
SS4-AISI Type 304
SS6-AISI Type 316
Fittings
Most fittings, as shown in this catalog, can be
supplied in aluminum or stainless steel.
Consult factory for possible minimum production
quantities and set-up charges.
Load Data
Aluminum
Channels approximate load data can be
determined by multiplying load data in the
steel channel section of this catalog by a
factor of 0.38.
Stainless Steel
Channel load data is the same as the data
in the steel channel section of this catalog.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
176
B22AL
31/4
(82.5)
27/16
15/8
(41.3)
(61.9)
15/8
(41.3)
15/8
(41.3)
15/8
(41.3)
B22AAL
B24AL
31/4
(82.5)
15/8
(41.3)
15/8
(41.3)
15/8
(41.3)
B54AL
B54AAL
13/16
15/8
(41.3)
(20.6)
15/8
(41.3)
15/8
(41.3)
B217AL
B217P
B217FFAL
CLOSURE STRIP
CLOSURE STRIP
17/16
(36.5)
5/8
(15.9)
21/2
(63.5)
17/16
(36.5)
Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.
177
B11AL
Aluminum
SH TYPE CHANNEL
Material: Aluminum
Material: Aluminum
TYP.
(50.8)
(152.4)
9/16 x 11/8 Slots
(14.2) (28.6)
3
(76.2)
7/8 (22.2) Dia. KO
H
H
Wt./C
Wt./C
Part No.
B12SH AL
B22SH AL
B24SH AL
B54SH AL
Thickness
.105
.105
.080
.080
(2.6)
(2.6)
(2.0)
(2.0)
H
27/16
15/8
15/8
13/16
Lbs./Ft. kg/m
(61.9)
(41.3)
(41.3)
(20.6)
.83
.63
.49
.34
(1.23)
(.93)
(.73)
(.50)
Part No.
Thickness
B12KO6 AL
B22KO6 AL
B24KO6 AL
B54KO6 AL
.105
.105
.080
.080
Lbs./Ft. kg/m
(2.6)
27/16
(2.6)
15/8 (41.3)
15/8 (41.3)
13/16 (20.6)
(2.0)
(2.0)
B2000 SERIES
Material: Aluminum
.86
.66
.52
.37
(61.9)
(1.28)
(.98)
(.77)
(.55)
Safety Factor of 5
Machine Screw and Square Nut included
Pipe clamp material 5052-H32
Design Load
17/8
Typ.
(47.6)
Wt./C
Part No.
B12H17/8 AL
B22H17/8 AL
B24H17/8 AL
B54H17/8 AL
Thickness
.105
.105
.080
.080
15/8 (41.3)
(2.0) 15/8 (41.3)
(2.0) 13/16 (20.6)
(2.6)
Lbs./Ft. kg/m
.86
.66
.52
.37
(1.28)
(.98)
(.77)
(.55)
Part No.
B2001 AL
B2008 AL
B2009 AL
B2010 AL
B2011 AL
B2012 AL
B2013 AL
B2014 AL
B2015 AL
B2016 AL
B2017 AL
B2018 AL
B2019 AL
B2020 AL
Conduit or
Pipe Size
3/8 (10)
1/2 (15)
3/4 (20)
1 (25)
11/4 (32)
11/2 (40)
2 (50)
21/2 (65)
3 (80)
31/2 (90)
4 (100)
1
4 /2 (115)
5 (125)
6 (150)
Material
Thickness
.063 (1.6)
.063 (1.6)
.080 (2.0)
.080 (2.0)
.080 (2.0)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.125 (3.2)
.125 (3.2)
.125 (3.2)
.125 (3.2)
.125 (3.2)
Design Load
Wt./C
Lbs.
kN
Lbs.
kg
180
180
270
270
270
360
360
360
360
450
450
450
450
450
(.80)
4
4
6
7
8
11
12
13
16
22
24
26
27
33
(1.8)
(.80)
(1.20)
(1.20)
(1.20)
(1.60)
(1.60)
(1.60)
(1.60)
(2.00)
(2.00)
(2.00)
(2.00)
(2.00)
(1.8)
(2.7)
(3.2)
(3.6)
(5.0)
(5.4)
(5.9)
(7.2)
(10.0)
(10.9)
(11.8)
(12.2)
(14.9)
Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.
178
Aluminum
Most fittings, as shown in this catalog, can be supplied in aluminum. See Fittings section (page 72) of this catalog.
Consult factory for possible minimum production quantities and set-up charges.
CHANNEL NUTS
B-Line recommends the use of Stainless Steel channel nuts with Aluminum channel. For channel nut pull-out strength
and slip resistance, use the channel nut information provided on pg. 50 & 51. A (.70) multiplier is to be applied to
obtain the appropriate derated values for aluminum channel.
SPRING NUT
Part Number
Without
Spring
N224WOSS6
N228WOSS6
N225WOSS6
Thread
Size
Wt./C
Thickness
1/4-20
1/4
(6.3)
3/8-16
3/8
(9.5)
1/2-13
3/8
(9.5)
Lbs.
kg
6.6
10.6
9.7
(3.0)
(4.8)
(4.4)
Part Number
Without
Spring
N224WOSS6
N228WOSS6
N225WOSS6
Thread
Size
Wt./C
Thickness
1/4-20
1/4
(6.3)
3/8-16
3/8
(9.5)
1/2-13
3/8
(9.5)
Lbs.
kg
6.6
10.6
9.7
(3.0)
(4.8)
(4.4)
Part Number
Without
Spring
N224WOSS6
N228WOSS6
N525WOSS6
Thread
Size
Wt./C
Thickness
1/4-20
1/4
(6.3)
3/8-16
3/8
(9.5)
1/2-13
3/8
(9.5)
Lbs.
kg
6.6
10.6
9.7
(3.0)
(4.8)
(4.4)
Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.
179
ALUMINUM FITTINGS
Stainless Steel
Alum. & Stainless Steel Materials
B22SS*
B24SS*
15/8
(41.3)
15/8
(41.3)
15/8
(41.3)
15/8
(41.3)
B32SS4
B42SS4
13/8
(34.9)
1
(25.4)
15/8
(41.3)
15/8
(41.3)
B54SS*
*Substitute 4 for Stainless Steel
Type 304 or 6 for Stainless Steel
Type 316
Thickness: 14 Ga. (1.9 mm)
Standard Length: 10 (3.05 m)
and 20 (6.09 m)
Material: SS4, SS6
Weight: .97 Lbs./Ft. (1.44 kg/m)
13/16
(20.6)
15/8
(41.3)
SH TYPE CHANNEL
TYP.
(50.8)
9/16 x 7/8 Slots
17/8
TYP.
(47.6)
(14.2) (22.2)
H
Wt./C
Part No.
B22SH SS4
B22SH SS6
B24SH SS4
B24SH SS6
B32SH SS4
B42SH SS4
B54SH SS4
B54SH SS6
Thickness
12 Ga.
12 Ga.
14 Ga.
14 Ga.
12 Ga.
12 Ga.
14 Ga.
14 Ga.
(2.6)
(2.6)
(1.9)
(1.9)
(2.6)
(2.6)
(1.9)
(1.9)
H
15/8 (41.3)
15/8 (41.3)
15/8 (41.3)
15/8 (41.3)
13/8 (34.9)
1
(25.4)
13/16 (20.6)
13/16 (20.6)
Lbs./Ft. kg/m
1.82
1.82
1.34
1.34
1.62
1.36
.91
.91
(2.70)
(2.70)
(1.99)
(1.99)
(2.41)
(2.02)
(1.35)
(1.35)
Wt./C
Part No.
B22H17/8 SS4
B24H17/8 SS4
B24H17/8 SS6
B32H17/8 SS4
B42H17/8 SS4
B54H17/8 SS4
B54H17/8 SS6
Thickness
12 Ga.
14 Ga.
14 Ga.
12 Ga.
12 Ga.
14 Ga.
14 Ga.
1 (25.4)
(1.9) 13/16 (20.6)
(1.9) 13/16 (20.6)
(2.6)
Lbs./Ft. kg/m
1.85
1.36
1.36
1.65
1.39
.93
.93
(2.75)
(2.02)
(2.02)
(2.45)
(2.07)
(1.38)
(1.38)
Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.
180
Stainless Steel
Alum. & Stainless Steel Materials
B2000 SERIES
PIPE AND TUBING CLAMPS
Safety Factor of 5
Combination Recess Hex Head Machine Screw and Square Nut included
Material: Stainless Steel Type 304 & 316
Design Load
Part No.
B2001 SS4
B2008 SS4
B2009 SS4
B2010 SS4
B2011 SS4
B2012 SS4
B2013 SS4
B2014 SS4
B2015 SS4
B2016 SS4
B2017 SS4
B2018 SS4
B2019 SS4
B2020 SS4
Conduit
Pipe Size
3/8 (10)
1/2 (15)
3/4 (20)
1 (25)
11/4 (32)
11/2 (40)
2 (50)
21/2 (65)
3 (80)
31/2 (90)
4 (100)
41/2 (115)
5 (125)
6 (150)
Wt./C
Lbs.
10
11
15
16
20
30
34
38
44
51
55
59
64
80
kg
(4.5)
(5.0)
(6.8)
(7.2)
(9.1)
(13.6)
(15.4)
(17.2)
(19.9)
(23.1)
(24.9)
(26.7)
(29.0)
(36.3)
CHANNEL NUTS
For Channel Nuts pull-out strength and slip resistance, use the data
shown in Channel Nuts & Hardware section of this catalog.
Note: Reduce slip load by 50% due to hardness of material.
SPRING NUT
Part Number
Without
Spring
N224WOSS6
N228WOSS6
N225WOSS6
Wt./C
Thread
Size
Thickness
1/4-20
1/4
(6.3)
3/8-16
3/8
(9.5)
1/2-13
3/8
(9.5)
Lbs.
kg
6.6
10.6
9.7
(3.0)
(4.8)
(4.4)
Part Number
Without
Spring
N224WOSS6
N228WOSS6
N225WOSS6
Thread
Size
Wt./C
Thickness
1/4-20
1/4
(6.3)
3/8-16
3/8
(9.5)
1/2-13
3/8
(9.5)
Lbs.
kg
6.6
10.6
9.7
(3.0)
(4.8)
(4.4)
Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.
181
Fiberglass
Cooper B-Line offers two fire retardant (FR) resins
for strut systems, polyester and vinyl ester. Both
resins are ideal for corrosive environments.
While polyester is sufficient for most uses,
vinyl ester is suitable for a broader range of
environments.
Please refer to the "Corrosion Resistance Guide"
for specific applications, page 183.
Fiberglass Materials
Fittings
The following dimensions apply to all fittings
except as noted on the drawings:
Hole Size13/32 (10.3 mm) Dia.
Hole Spacing13/16 (20.6 mm) from end and
17/8 (47.6 mm) on center.
Width15/8 (41.3 mm)
Thickness1/4 (6.3 mm)
Metric
Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in
millimeters.
182
Fiberglass
CHANNEL RESIN INFORMATION
Cooper B-Line offers two fire retardant (FR) resins for strut systems, polyester and vinyl ester. Both resins are
ideal for corrosive environments.
While polyester is sufficient for most uses, vinyl ester is suitable for a broader range of environments.
Please refer to the "Corrosion Resistance Guide" below for specific applications.
Corrosion Resistance Guide
160F (71C)
BFP/BFV
BFV-150 **
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFV
BFV-120 **
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFV
BFP/BFV
BFP/BFV
BFV
BFV-120 **
BFP/BFV
BFV-120 **
BFP/BFV
BFP/BFV
BFP/BFV
BFV-210 **
BFP/BFV
BFP/BFV
BFP/BFV
BFP/BFV
BFV
BFV
BFV
BFV-180 **
BFP/BFV
BFV-210 **
BFV
BFV-210 **
BFP/BFV
BFP/BFV
to exceed this temperature
Information contained in this chart is based on data from raw material suppliers.
Temperatures are not the minimum nor the maximum (except where specifically stated) but represent standard test
conditions. The products may be suitable at higher temperatures but individual test data should be required to
establish suitability.
The recommendations or suggestions contained in this chart are made without guarantee or representation as to results.
We suggest that you evaluate the recommendations and suggestions in your own laboratory or actual field trial prior to use.
Recommended Guideline:
Temperature
75F (24C)
100%
100F (38C)
90%
125F (52C)
78%
150F (66C)
68%
175F (79C)
60%
200F (93C)
52%
BFP
183
BFV
75/75
100
none
0 sec.
25
V-0
Fiberglass Materials
Chemicals
70F (21C)
160F (71C)
Chemicals
70F (21C)
Acetic acid 5%
BFP/BFV
BFP/BFV
Methyl alcohol 10%
Acetic acid 52%
BFP/BFV
BFV-210 **
Naphtha
Aluminum potassium sulfate 5% BFP/BFV
BFP/BFV
Nitric acid 5%
Ammonium hydroxide 10%
BFP/BFV
BFV-150 **
Nitric acid 20%
Ammonium nitrate
BFP/BFV
BFP/BFV
Phosphoric acid 10%
Benzene sulfonic acid 5%
BFP/BFV
BFP/BFV
Phosphoric acid 30%
Calcium chloride
BFP/BFV
BFP/BFV
Phosphoric acid 85%
Carbon tetrachloride
BFV
BFV-100 **
Sodium bicarbonate 10%
Chlorine dioxide 15%
BFP/BFV
BFV-150 **
Sodium bisulfate
Chromic acid 5%
BFV
BFV-150 **
Sodium carbonate
Copper sulfate
BFP/BFV
BFP/BFV
Sodium chloride
Diesel fuel
BFP/BFV
BFV
Sodium hydroxide 1-50%
Ethylene glycol
BFP/BFV
BFP/BFV
Sodium hypochlorite 5%
Fatty acids 100%
BFP/BFV
BFP/BFV
Sodium nitrate
Ferrous sulfate
BFP/BFV
BFP/BFV
Sodium silicate
Fluosilicic acid 0-20%
BFV
BFV
Sodium sulfate
Gasoline
BFP/BFV
BFV
Sulfuric acid 0-30%
Hydrochloric acid 1%
BFP/BFV
BFP/BFV
Sulfuric acid 30-50%
Hydrochloric acid 15%
BFP/BFV
BFV-180 **
Sulfuric acid 50-70%
Hydrochloric acid 37%
BFP/BFV
BFV-150 **
Trisodium phosphate 25%
Kerosene
BFP/BFV
BFP/BFV
Trisodium phosphate-All
Magnesium chloride
BFP/BFV
BFP/BFV
Water, Distilled
BFP - BFP parts recommended
BFV - BFV parts recommended
** - Not recommended
Fiberglass
BFP22 THRU BFV22SH
Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m)
Fiberglass strut meets specification of
ASTM D-4385 Levels III and IV.
BFP22H17/8
Fiberglass Materials
BFP22
BFV22
Solid Back
Part No.
BFV22SH
(14.3) x 7/8 (22.2) slots
2 (50.8) on centers
9/16
9/16
(14.3) holes
17/8 (47.6) on centers
Material
BFP22*
BFV22*
BFP22H17/8*
BFV22H17/8*
BFP22SH*
BFV22SH*
BFP22SH
BFV22H17/8
Description
Polyester Resin
Vinyl Ester Resin
Polyester Resin
Vinyl Ester Resin
Polyester Resin
Vinyl Ester Resin
Color
Solid Back
Solid Back
Holes in Back
Holes in Back
Slots in Back
Slots in Back
Gray
Beige
Gray
Beige
Gray
Beige
13/16
(20.6)
Weight
Lbs./ft.
kg/m
.63
.63
.60
.60
.61
.61
(.94)
(.94)
15/8
(41.3)
(.89)
(.89)
(.91)
(.91)
15/8
(41.3)
* Insert -10 for 10-0 (3.05 m) length or -20 for 20-0 (6.09 m) length
BFP22A
BFV22A
13/16
(20.6)
15/8
(41.3)
BFP22A
BFV22A
Solid Back to
Back
Part No.
BFP22A*
BFV22A*
Material
Description
Polyester Resin
Vinyl Ester Resin
Color
Back To Back
Back To Back
Gray
Beige
31/4
(82.5)
Weight
Lbs./ft.
kg/m
1.15
1.15
(1.71)
(1.71)
15/8
(41.3)
* Insert -10 for 10-0 (3.05 m) length or -20 for 20-0 (6.09 m) length
WARNING: Appropriate protective clothing and respiratory
protection device should be worn when field
cutting or grinding fiberglass.
Temperature
75F
100F
125F
150F
175F
200F
(24C)
(38C)
(52C)
(66C)
(79C)
(93C)
184
Fiberglass
BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN
Beam
Span
in.
Part
No.
mm
Maximum
Allowable
Beam Load
Load
Deflection
@ Maximum
Allowable
Beam Load
1/360 Span
Lbs.
kN
in.
mm
Lbs.
kN
Lbs.
kN
(305)
BFP22
BFP22A
1781
2259
(7.92)
(10.05)
0.064
0.037
(1.62)
(.94)
1392
2259
(6.19)
(10.05)
928
2051
(4.13)
(9.12)
24
(609)
BFP22
BFP22A
890
1127
(3.96)
(5.01)
0.256
0.147
(6.50)
(3.73)
347
767
(1.54)
(3.41)
231
511
(1.03)
(2.27)
36
(914)
BFP22
BFP22A
592
750
(2.63)
(3.33)
0.576
0.330
(14.63)
(8.38)
153
338
(0.68)
(1.50)
101
224
(0.45)
(0.99)
48
(1219)
BFP22
BFP22A
443
560
(1.97)
(2.49)
1.024
0.587
(26.01)
(14.91)
85
188
(0.38)
(0.83)
55
123
(0.24)
(0.55)
60
(1524)
BFP22
BFP22A
353
446
(1.57)
(1.98)
1.600
0.918
(40.64)
(23.32)
53
117
(0.23)
(0.52)
34
76
(0.15)
(0.34)
72
(1829)
BFP22
BFP22A
293
370
(1.30)
2.303
1.322
(58.49)
(0.34)
22
50
(0.10)
(33.58)
35
78
(0.15)
(1.64)
96
(2438)
BFP22
BFP22A
218
273
(0.97)
(1.21)
4.095
2.350
(104.01)
(59.69)
17
39
(0.07)
(0.17)
9
23
(0.04)
(0.10)
120
(3048)
BFP22
BFP22A
172
214
(0.76)
(0.95)
6.398
3.671
(162.51)
(93.24)
8
19
(0.03)
(0.08)
3
9
(0.01)
(0.04)
(0.22)
Part
No.
mm
Maximum
Allowable
Beam Load
Load
Deflection
@ Maximum
Allowable
Beam Load
1/360 Span
Lbs.
kN
in.
mm
Lbs.
kN
Lbs.
kN
12
(305)
BFV22
BFV22A
2220
6442
(9.87)
(28.65)
0.071
0.039
(1.80)
(0.99)
1568
6442
(6.97)
(29.65)
1045
5549
(4.65)
(24.68)
24
(609)
BFV22
BFV22A
1109
3219
(4.93)
(14.32)
0.283
0.155
(7.19)
(3.94)
391
2079
(1.74)
(9.25)
260
1385
(1.15)
(6.16)
36
(914)
BFV22
BFV22A
738
2144
(3.28)
(9.53)
0.637
0.348
(16.18)
(8.84)
172
922
(0.76)
(4.10)
114
613
(0.51)
(2.72)
48
(1219)
BFV22
BFV22A
553
1606
(2.46)
(7.14)
1.133
0.619
(28.78)
(15.72)
96
516
(0.43)
(2.29)
63
342
(0.28)
(1.52)
60
(1524)
BFV22
BFV22A
441
1283
(1.96)
(5.70)
1.770
0.967
(44.96)
(24.56)
60
327
(0.26)
(1.45)
39
216
(0.17)
(0.96)
72
(1829)
BFV22
BFV22A
366
1067
(1.63)
(4.74)
2.549
1.393
(64.74)
(35.38)
40
224
(0.18)
(0.99)
25
147
(0.11)
(0.65)
96
(2438)
BFV22
BFV22A
273
796
(1.21)
(3.54)
4.531
2.477
(115.09)
(62.91)
19
121
(0.08)
(0.54)
11
78
(0.05)
(0.34)
120
(3048)
BFV22
BFV22A
216
633
(0.96)
(2.81)
7.079
3.870
(179.80)
(98.30)
9
72
(0.04)
(0.32)
7
44
(0.02)
(0.19)
Loading Information
Beam Loads:
The above charts list the total allowable uniform load for various simple spans based on a minimum safety factor of 2. If the load is
concentrated at center span, multiply the load from the above charts by 0.5 and the corresponding deflection by 0.8.
All beams should be supported in a manner to prevent rotation at supports. Long, deep beams should be tied between supports to prevent twist.
For channels with holes or slots use 90% of recommended load shown in channel loading chart.
185
Fiberglass Materials
12
Fiberglass
BFP42 THRU BFV42SH
Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m)
Fiberglass strut meets specification of
ASTM D-4385 Levels III and IV.
BFP42SH
BFP42H17/8
Fiberglass Materials
BFP42*
BFV42*
BFP42H17/8*
BFV42H17/8*
BFP42SH*
BFV42SH*
9/16
9/16
BFV42
Solid Back
Part No.
BFV42SH
(14.3) x 7/8 (22.2) slots
2 (50.8) on centers
BFV42H17/8
(14.3) holes
17/8 (47.6) on centers
BFP42
Material
Description
Polyester Resin
Vinyl Ester Resin
Polyester Resin
Vinyl Ester Resin
Polyester Resin
Vinyl Ester Resin
Color
Solid Back
Solid Back
Holes in Back
Holes in Back
Slots in Back
Slots in Back
Gray
Beige
Gray
Beige
Gray
Beige
13/16
(20.6)
Weight
Lbs./ft.
kg/m
.48
.48
.46
.46
.47
.47
(.71)
(.71)
(.68)
(.68)
(.70)
(.70)
1
(25.4)
15/8
(41.3)
* Insert -10 for 10-0 (3.05 m) length or -20 for 20-0 (6.09 m) length
BFP42A
BFV42A
Channel lengths: 10 Ft. (3.05 m) and
20 Ft. (6.09 m)
Fiberglass strut meets specification of
ASTM D-4385 Levels III and IV.
13/16
(20.6)
BFP42A
(25.4)
BFV42A
Solid Back to Back
Part No.
BFP42A*
BFV42A*
Color
Description
Material
Polyester Resin
Vinyl Ester Resin
Back To Back
Back To Back
Gray
Beige
2
(50.8)
Weight
Lbs./ft.
kg/m
.85
.85
(1.26)
15/8
(41.3)
(1.26)
* Insert -10 for 10-0 (3.05 m) length or -20 for 20-0 (6.09 m) length
Temperature
75F (24C)
100F (38C)
125F (52C)
150F (66C)
175F (79C)
200F (93C)
186
Fiberglass
BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN
Beam
Span
in.
Part
No.
mm
Maximum
Allowable
Beam Load
Load
Deflection
@ Maximum
Allowable
Beam Load
1/360 Span
Lbs.
kN
in.
mm
Lbs.
kN
Lbs.
kN
(305)
BFP42
BFP42A
841
2325
(3.74)
(10.34)
0.104
0.060
(2.64)
(1.52)
403
1948
(1.79)
(8.66)
269
1299
(1.19)
(5.78)
24
(609)
BFP42
BFP42A
420
1161
(1.87)
(5.16)
0.417
0.239
(10.59)
(6.07)
100
486
(0.44)
(2.16)
66
323
(0.29)
(1.43)
36
(914)
BFP42
BFP42A
279
773
(1.24)
(3.44)
0.938
0.537
(23.82)
(13.64)
43
214
(0.19)
(0.95)
29
142
(0.13)
(0.63)
48
(1219)
BFP42
BFP42A
208
578
(0.92)
(2.57)
1.667
0.955
(42.34)
(24.26)
23
119
(0.10)
(0.53)
15
78
(0.06)
(0.34)
60
(1524)
BFP42
BFP42A
166
461
(0.74)
(2.05)
2.604
1.491
(66.14)
(37.87)
14
74
(0.06)
(0.33)
8
48
(0.03)
(0.21)
72
(1829)
BFP42
BFP42A
137
383
(0.61)
(1.70)
3.750
2.148
(95.25)
(54.56)
8
49
(0.03)
(0.22)
5
31
(0.02)
(0.14)
96
(2438)
BFP42
BFP42A
101
284
(0.45)
(1.26)
6.667
3.818
(169.34)
(96.98)
3
24
(0.01)
(0.10)
14
(0.04)
(3048)
BFP42
BFP42A
79
224
(0.35)
(0.99)
10.417
5.966
(264.59)
(151.53)
11
(0.02)
120
(0.05)
Part
No.
mm
Maximum
Allowable
Beam Load
Load
Deflection
@ Maximum
Allowable
Beam Load
Lbs.
kN
in.
mm
1/360 Span
Lbs.
kN
Lbs.
kN
12
(305)
BFV42
BFV42A
988
2865
(4.39)
(12.74)
0.112
0.063
(2.84)
(1.60)
440
2278
(1.96)
(10.13)
293
1518
(1.30)
(6.75)
24
(609)
BFV42
BFV42A
493
1431
(2.19)
(6.36)
0.448
0.252
(11.38)
(6.40)
109
568
(0.48)
(2.52)
73
378
(0.32)
(1.68)
36
(914)
BFV42
BFV42A
328
953
(1.46)
(4.24)
1.009
0.566
(25.63)
(14.37)
48
251
(0.21)
(1.11)
31
166
(0.14)
(0.74)
48
(1219)
BFV42
BFV42A
245
713
(1.09)
(3.17)
1.793
1.006
(45.54)
(25.55)
26
139
(0.11)
(0.62)
16
92
(0.07)
(0.41)
60
(1524)
BFV42
BFV42A
195
569
(0.87)
(2.53)
2.802
1.572
(71.17)
(39.93)
15
87
(0.06)
(0.38)
9
57
(0.04)
(0.25)
72
(1829)
BFV42
BFV42A
162
473
(0.72)
(2.10)
4.035
2.264
(102.49)
(57.50)
9
58
(0.04)
(0.26)
5
37
(0.02)
(0.16)
96
(2438)
BFV42
BFV42A
120
351
(0.53)
(1.56)
7.173
4.025
(182.19)
(102.23)
3
29
(0.01)
(0.13)
1
17
(0.004)
(0.07)
120
(3048)
BFV42
BFV42A
94
278
(0.42)
(1.23)
11.207
6.288
(284.66)
(159.71)
14
(0.06)
(0.03)
Loading Information
Beam Loads:
The above charts list the total allowable uniform load for various simple spans based on a minimum safety factor of 2. If the load is
concentrated at center span, multiply the load from the above charts by 0.5 and the corresponding deflection by 0.8.
All beams should be supported in a manner to prevent rotation at supports. Long, deep beams should be tied between supports to prevent twist.
For channels with holes or slots use 90% of recommended load shown in channel loading chart.
187
Fiberglass Materials
12
Fiberglass
BF*22I
CONCRETE INSERTS
Fiberglass Materials
Length
31/8
(79.4)
...
BFV501 SERIES
U-BOLTS WITH HEX NUTS
Load A
Load B
Part No.
Nominal
Pipe Size
Thread
Size
Design Load
A
Design Load
B
Lbs.
kN
Lbs.
in.
mm
BFV501-1/2
1/2
(15)
3/8-16
300
(1.33)
BFV501-3/4
3/4
(20)
3/8-16
300
(25)
3/8-16
(32)
3/8-16
(40)
3/8-16
(50)
1/2-13
(65)
1/2-13
(80)
1/2-13
(90)
1/2-13
(100)
1/2-13
BFV501-1
BFV501-11/4
11/4
BFV501-11/2
11/2
BFV501-2
BFV501-21/2
BFV501-3
BFV501-31/2
BFV501-4
2
21/2
3
31/2
4
Maximum
Torque
Wt./C
kN
in.-Lbs.
Nm
Lbs.
kg
150
(.67)
30
(3.4)
3.5
(1.59)
(1.33)
150
(.67)
30
(3.4)
3.9
(1.77)
300
(1.33)
150
(.67)
30
(3.4)
4.4
(1.99)
300
(1.33)
150
(.67)
30
(3.4)
4.8
(2.18)
300
(1.33)
150
(.67)
30
(3.4)
5.2
(2.36)
600
(2.67)
200
(.89)
60
(6.8)
7.7
(3.49)
600
(2.67)
200
(.89)
60
(6.8)
10.2
(4.63)
600
(2.67)
200
(.89)
60
(6.8)
12.6
(5.71)
600
(2.67)
200
(.89)
60
(6.8)
15.1
(6.85)
600
(2.67)
200
(.89)
60
(6.8)
17.6
(7.98)
188
Fiberglass
CHANNEL NUTS
Design Load Safety Factor of 3
Overall Nut Height 5/8 (15.9)
Maximum torque and slip resistance loads shown are
when using stainless steel bolts. When using fiberglass
hardware use Max. Torque for fiberglass bolts, and
multiply slip resistance loads by .14 for 3/8 and .60 for
1/2 thread size.
Material: Glass Reinforced Polyurethane
Spring Material: Zinc Plated Steel
Part No.
W/O Spring
BFV-224
BFV-223
BFV-228
BFV-225
BFV-224WO
BFV-223WO
BFV-228WO
BFV-225WO
Thread
Size
WITH
SPRING
Pull-Out
1/4-20
5/16-18
3/8-16
1/2-13
Slip Resistance
Max. Torque
kN
Lbs.
in.-Lbs.
Nm
Lbs.
300
300
300
300
(1.33)
150
150
150
150
(.67)
200
200
200
200
(22.6)
2.4
2.5
2.3
2.1
(1.33)
(1.33)
(1.33)
(.67)
(.67)
(.67)
BFVHHCS
HEX HEAD CAP SCREWS
Design Load Safety Factor of 3
Material: Glass Reinforced Polyurethane
Part
No.
Thread
Size
5/16
5/16-18
5/16-18
Design Load
(in tension)
190
(.84)
30
(3.4)
.4
(.18)
190
(.84)
30
(3.4)
.5
(.23)
5/16-18
190
(.84)
30
(3.4)
.6
(.27)
5/16-18
190
(.84)
30
(3.4)
.8
(.36)
3/8-16
300
(1.33)
45
(5.1)
.9
(.41)
3/8-16
300
(1.33)
45
(5.1)
1.1
(.50)
3/8-16
300
(1.33)
45
(5.1)
1.3
(.59)
3/8-16
300
(1.33)
45
(5.1)
1.3
(.59)
3/8-16
300
(1.33)
45
(5.1)
1.5
(.68)
1/2-13
490
(2.18)
110
(12.4)
1.4
(.63)
11/4
1/2-13
490
(2.18)
110
(12.4)
1.8
(.81)
1/2-13
490
(2.18)
110
(12.4)
2.2
(1.00)
BFVHHCS 1/2 x 2
1/2-13
490
(2.18)
110
(12.4)
3.0
(1.36)
1/2-13
490
(2.18)
110
(12.4)
3.7
(1.68)
1/2-13
490
(2.18)
110
(12.4)
4.5
(2.04)
x1
BFVHHCS
5/16
11/2
BFVHHCS 5/16 x 2
BFVHHCS
3/8
x1
3/8
11/2
BFVHHCS 3/8 x 2
BFVHHCS
3/8
21/2
BFVHHCS 1/2 x 1
BFVHHCS
BFVHHCS
1/2
1/2
x3
Nm
Wt./C
in.-Lbs.
Lbs.
Max. Torque
kN
BFVHHCS
Wt./C
Lbs
Lbs.
kg
BFVHN
HEX NUTS
3/4 & 1 sizes are available. Contact inside
sales for details
Material: Glass Reinforced Polyurethane
Part
No.
Thread
Size
Nut Thickness
in.
mm
Lbs.
Wt./C
kg
BFVHN
5/16
5/16-18
17/64
(6.7)
.2
(.09)
BFVHN
3/8
3/8-16
21/64
(8.3)
.3
(.13)
BFVHN
1/2
1/2-13
7/16
(11.1)
.7
(.32)
BFVHN
5/8
5/8-11
35/64
(13.9)
1.4
(.63)
189
(22.6)
(22.6)
(22.6)
kg
(1.09)
(1.13)
(1.04)
(0.95)
Fiberglass Materials
Part No.
With Spring
W/O
(WITHOUT)
SPRING
Fiberglass
BFVATR
ALL THREADED ROD
Design Load Safety Factor of 3
Use ATR nuts in place of hex nuts with 3/8-16 and 1/2-13 threaded rod
in order to obtain minimum required thread engagement of
17/32 (13.5) to obtain design load shown below.
Material: Glass Reinforced Vinyl Ester
Fiberglass Materials
Part
No.
Design Load
(in tension)
Thread
Size
3/8-16
BFVATR 3/8 x 48
BFVATR 1/2 x 48
BFVATR 5/8 x 48
1/2-13
5/8-11
Max. Torque
Lbs.
kN
in.-Lbs.
425
750
950
(1.89)
45
110
230
(3.33)
(4.22)
Nm
(5.1)
(12.4)
(26.0)
Wt./Ft.
Lbs.
kg
.08
.13
.21
(.04)
(.06)
(.09)
BFVATRHN
THREADED ROD NUTS
ATR Nut is required with 3/8-16 and 1/2-13 ATR to provide
additional thread engagement which is critical to ATR load
carrying capacity.
Material: Glass Reinforced Polyurethane
H
Part
No.
BFVATRHN 3/8
BFVATRHN 1/2
Thread
Size
in.
H
mm
Lbs.
Wt./C
kg
3/8-16
3/4
(19)
7/8
(22)
.8
1.7
(.36)
1/2-13
(.77)
BFVFW
FLAT WASHERS
Material: PVC
Part
No.
BFVFW
BFVFW
BFVFW
BFVFW
BFVFW
Hole
Size
Wt./C
in.
Lbs.
kg
3/8
3/8
1/2
5/8
5/8
3/4
3/4
.5
.5
.5
.5
.5
(.22)
1/2
(.22)
(.22)
(.22)
(.22)
BFV655 SERIES
ROD COUPLINGS
Material: Glass Reinforced Polyurethane
Part
Thread
No.
Size
Lbs.
kg
3/8-16
7.4
11.3
16.7
(3.35)
BFV655-3/8
BFV655-1/2
BFV655-5/8
1/2-13
5/8-11
Wt./C
(5.12)
(7.57)
190
Fiberglass
BFV100 thru BFV300
Design Load
Stop-Lock Kit
for vertical
installation
Nominal
Pipe Sizes
Part
No.
BFV100
BFV200
BFV300
Pipe O.D.
Range
Design
Load
Max.
Torque
in.
mm
in.
mm
Lbs.
kN
in.-Lbs.
Nm
- 11/2
11/2 - 2
21/2 - 3
(15- 40)
.75 - 1.90
1.90 - 2.37
2.87 - 3.50
(21.3 - 48.3)
135
135
145
(.60)
10
36
36
(1.13)
(40 - 51)
1/2
(63 - 76)
(48.3 - 60.3)
(73.0 - 88.9)
(.60)
(.64)
BFV2000 SERIES
NON-METALLIC PIPE CLAMPS
For rigid and PVC conduit.
Standard hardware includes slotted round head machine
screw and square nut in 316 stainless steel
Design Load Safety Factor of 3
Material: Glass Reinforced PPO
Not recommended for vertical installation without additional Stop-Lock
Kit. Kit includes one square washer, channel nut and hex head cap
screw. Order (Stop-Lock Kit) BFVSL-3/8 for 3/8-16 hardware or
BFVSL-1/2 for 1/2-13 hardware. Mount kit below clamp when used
in vertical strut to prevent clamp slipping.
If non-metallic hardware is required, add N to the part number.
Example: BFV2008N
Part No.
BFV2008
BFV2009
BFV2010
BFV2011
BFV2012
BFV2013
BFV2014
BFV2015
BFV2016
BFV2017
Nominal
Pipe Size
Design Load
Maximum
Torque
in.
mm
Lbs.
kN
in.-Lbs.
1/2
(15)
(1.33)
3/4
(20)
1
11/4
11/2
2
21/2
3
31/2
4
(25)
300
300
300
300
300
300
300
300
300
300
10
10
10
10
10
10
10
10
10
10
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
(1.33)
Design Load
Nm
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
(1.13)
Stop-Lock Kit
for vertical
installation
191
(4.07)
(4.07)
Fiberglass Materials
Completely Non-Metallic
Adjustable to U.S. & Metric Pipe Diameters
Fits OD Sizes 3/4 (19.0) to 31/2 (88.9)
Easy To Install
No Special Tools Required
Design Load Safety Factor of 3
Material: Glass Reinforced Polyurethane
Not recommended for vertical installation without additional
Stop-Lock Kit. Kit includes one square washer, channel nut
and hex head cap screw. Order (Stop-Lock Kit) BFVSL-3/8
for 3/8-16 hardware or BFVSL-1/2 for 1/2-13 hardware.
Mount kit below clamp when used in vertical strut to
prevent clamp slipping.
Fiberglass
BFP2400 SERIES
2-HOLE PIPE CLAMPS
Design Load Safety Factor of 3
Material: Glass Reinforced Polyester
Design Load
15/8
(41.3)
Fiberglass Materials
Pipe
Size
13/32 (10.3)
Hole Dia.
A
B
Part
No.
BFP2400-2
BFP2400-3
BFP2400-4
BFP2400-6
Nominal
Pipe
Size
Design
Load
in.
mm
in.
mm
in.
mm
Lbs.
kN
2
3
4
6
(50)
23/8
31/2
41/2
65/8
(60)
51/2
63/4
73/4
10
(140)
115
130
150
150
(0.51)
(80)
(100)
(150)
(89)
(114)
(168)
(171)
(197)
(254)
(0.58)
(0.66)
(0.66)
BEAM CLAMP
Design Load Safety Factor of 3
BFV751J (clip included) must be used
when installed on tapered flange beams.
Material: Glass Reinforced Polyurethane
Setscrew material: Stainless Steel 316
ASTM F593 Group 2, S4
Screw
BFV751
(Clamp
Only)
BFV751J
(Clamp and
Retainer Clip)
(76.2)
1
(25.4)
41/4
(108.0)
Part No.
BFV751-3/8
BFV751J-3/8
BFV751-1/2
BFV751J-1/2
BFV751-5/8
BFV751J-5/8
Design Load
Torque
Lbs.
kN
ft.-Lbs.
Nm
500
500
500
500
500
500
(2.22)
10
10
10
10
10
10
(13)
(2.22)
(2.22)
(2.22)
(2.22)
(2.22)
Tapped for
Hanger Rod
Size A
(13)
(13)
(13)
(13)
(13)
192
11/8
(28.6)
BFVATR3/8
& BFPUATRHN
(Order Separately)
Fiberglass
BFV755
BEAM CLAMP
Design Load Safety Factor of 3
Material: Glass Reinforced Polyurethane
Setscrew material: Stainless Steel 316
ASTM F593 Group 2, S4
1/2-13 x 2 (50.8)
25/8
Screw
(66.7)
3
(76.2)
Part No.
BFV755-1/2
1/2-13
3/4
(19.0)
Torque
Lbs.
kN
ft.-Lbs.
Nm
400
400
(1.78)
10
10
(13)
(1.78)
Tapped for
Hanger Rod
Size A
(13)
BFV3104 SERIES
CLEVIS HANGERS
Design Load Safety Factor of 3 at 120F (49C).
Insulation may be required at higher temperatures.
Order hanger rod and nuts separately.
Material: Glass Reinforced Polyurethane
For BFV3104-1 thru BFV3104-6
Material: Glass Reinforced Polyester & Vinyl Ester
For BFV3104-8 thru BFV3104-12
Nominal
Pipe
Size
Part
No.
in.
mm
BFV3104-1
1
(50)
1
1
BFV3104-1 /2
1 /2
(65)
BFV3104-2
2
(50)
BFV3104-21/2, 3, 4 21/2-4 (65-100)
BFV3104-6
6
(150)
Part
No.
Nominal
Pipe
Size
in.
BF*3104-8
BF*3104-10
BF*3104-12
8
10
12
in.
(200)
91/4
113/8
(300) 131/2
Hanger
Rod
Size
in.
mm
in.
mm
in.
mm
11/2
2
21/2
51/8
63/4
(38)
41/4
51/8
61/2
10
125/16
(108)
11/4
11/4
11/4
11/2
2
(32)
1/2-13
(32)
1/2-13
(32)
1/2-13
(38)
1/2-13
(51)
1/2-13
(51)
(63)
(130)
(171)
(130)
(165)
(254)
(313)
mm
(250)
mm
in.
(235)
165/8
(422)
(289)
197/8
223/8
(505)
(343)
Hanger
Rod
Size
C
mm
(568)
in.
3
4
5
mm
(76)
5/8-11
(101)
5/8-11
(127)
5/8-11
193
Design
Load
Lbs.
kN
670
670
730
1150
1170
(2.98)
(2.98)
(3.25)
(5.11)
(5.20)
Design
Load
Lbs.
kN
350
450
600
(1.55)
(2.01)
(2.69)
Fiberglass Materials
BFV755-3/8
Design Load
Fiberglass
BF*409 SERIES
BRACKETS 6 (152) TO 24 (609) LONG
Design Load Safety Factor of 3 based on uniform loading
MH1 - From Top of Bracket to center of Mounting Hole
MH2 - From Bottom of Bracket to center of Mounting Hole
11/4
(31.7)
Fiberglass Materials
MH1
12"
(304.8)
BF*409-6
BF*409-9
BF*409-12
BF*409-18
BF*409-24
Design
Load
Part No.
in.
mm
Lbs.
kN
10
13
16
22
28
(250)
1400
1000
800
675
450
(6.22)
(330)
(406)
(559)
(711)
MH2
(4.45)
(3.56)
11/4
(31.7)
(3.00)
(2.00)
BF*494 SERIES
BRACKETS 24 (609) TO 36 (914) LONG
11/4
(31.7)
MH1
BF*494-24
BF*494-30
BF*494-36
Design
Load
Part No.
in.
mm
in.
mm
Lbs.
kN
28
34
40
(711)
23
26
29
(584)
750
750
750
(3.33)
(863)
(1016)
(660)
(736)
(3.33)
MH2
(3.33)
Mounting Holes
11/4
(31.7)
194
Fiberglass
BFV201
BFV202
15/8
(41.3)
15/8
(41.3)
9/16 (14.3)
Diameter Hole
BFV340
BFV129
15/8
(41.3)
31/4
(82.5)
31/2
(88.9)
BFV141
BFV557
47/8
(123.8)
53/8
(136.5)
15/8
(41.3)
195
15/8
(41.3)
Fiberglass Materials
13/32 (10.3)
Diameter Hole
Fiberglass
BFV341
BFV342
91/8
(231.8)
71/4
Fiberglass Materials
(184.1)
BFV140
BFV143
31/2
(88.9)
31/2
(88.9)
31/2
(88.9)
53/8
(136.5)
BFV132
BFV133
53/8
(136.5)
31/2
(88.9)
53/8
(136.5)
53/8
(136.5)
196
Fiberglass
BFV135
BFV142
31/2
31/2
(88.9)
(88.9)
31/2
53/8
(88.9)
(136.5)
BFV136
Fiberglass Materials
BFV337
31/2
(88.9)
31/2
(88.9)
31/2
53/8
(88.9)
(136.5)
BFV532
BFV334
91/8
(231.8)
53/8
(136.5)
53/8"
(136.5)
53/8
(136.5)
197
Fiberglass
BFV101
BFV103
15/8
15/8
(41.3)
(41.3)
25/16
41/8
(104.8)
Fiberglass Materials
(58.7)
BFV104
BFV118
15/8
31/2
(88.9)
31/2
(88.9)
(41.3)
41/8
(104.8)
41/8
(104.8)
BFV558
BFV371-2G
31/4
(82.5)
THREE HOLES
(10.1)
21/4
(57.1)
.400 Dia.
4
(101.6)
15/8
(41.3)
15/8
(41.3)
15/8
(41.3)
198
Fiberglass
BFV280SQ
BFV281SQ
(76.2)
5
(127.0)
(127.0)
65/8
(168.3)
(127.0)
BFV650
B217P
CHANNEL SPACER
17/16
(36.5)
5/8
(15.9)
199
Fiberglass Materials
3
(76.2)
Channel
Channels are cold formed on our modern rolling
mills from 18 Ga. (1.2 mm) low carbon steel strips
plain steel (ASTM A1008 33,000 PSI min. yield)
and pre- galvanized steel strips, (ASTM A653
33,000 PSI min. yield). A continuous slot with
inturned lips provides the ability to make
attachments at any point. Channel combinations
are made with new state of the art, high-tech
welding equipment.
Lengths
Standard lengths are 10 (3.05 m) and 20 (6.09 m)
for B62 series, and 10 (3.05 m) for B72 series.
Custom lengths are available.
Fittings
Mini fittings are formed from hot rolled pickled and
oiled strip or sheet steel (ASTM A1011, HSLAS,
Grade 50, Class1). The following dimensions
apply to all fittings except as noted on the
drawings:
Hole Size9/32 (7.14 mm) Dia.
Hole Spacing13/32 (10.3 mm) from end and
11/16 (27.0 mm) on center.
Width13/16 (20.6 mm)
Thickness1/8 (3.2 mm)
Finish
PLN
Plain
ZN
GRN
GLV
Electro-Plated Zinc
Dura-Green
Pre-Galvanized
HDG
Hot-Dipped Galvanized
Specification
ASTM A1011, HSLAS,
Grade 50, Class 1
ASTM B633 SC3 Type II
ASTM A653
33,000 PSI min. yield
ASTM A123
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
200
B62 Channel
13/16
13/16
(20.6)
(20.6)
7/16
(11.1)
3/16
3/16
(4.7)
(4.7) 3
/32
(2.4)
13/16
Y
X
.346
(8.8)
(20.6)
15/8
(41.3)
Y
.406
(10.3)
B62A
13/16
.406
(10.3)
(20.6)
SECTION PROPERTIES
Channel
Areas of
Section
Weight
Moment of
Inertia (I)
Section
Modulus (S)
cm2
in.4
cm4
in.3
cm3
(.80)
(1.59)
.0103
.0500
(.43)
(2.08)
.0221
.0616
(.36)
(1.01)
B62
B62A
.420 (.62)
.839 (1.25)
.123
.247
Y - Y Axis
Radius of
Gyration (r)
Moment of
Inertia (I)
in.4
cm
in.
.289 (.73)
.450 (1.14)
Section
Radius of
Modulus (S) Gyration (r)
cm4
in.3
cm3
in.
cm
.330
.330
(.84)
(.84)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
BEAM LOADING
In.
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
Channel
Style
B62
B62A
B62
B62A
B62
B62A
B62
B62A
B62
B62A
B62
B62A
Lbs.
In.
mm
Lbs.
Lbs.
364
420*
182
420*
121
341
91
256
73
205
61
170
(1619.1)
(1868.2)
(809.6)
(1868.2)
(538.2)
(1516.8)
(404.8)
(1138.7)
(324.7)
(911.9)
(271.3)
(756.2)
.027
.006
.109
.051
.245
.141
.436
.250
.681
.391
.981
.563
(.68)
(.15)
(2.77)
(1.29)
(6.22)
(3.58)
(11.07)
(6.35)
(17.30)
(9.93)
(24.92)
(14.30)
364
420*
167
420*
74
341
42
204
27
131
19
91
(1619.1)
(1868.2)
(742.8)
(1868.2)
(329.1)
(1516.8)
(186.8)
(907.4)
(120.1)
(582.7)
(84.5)
(404.8)
364
420*
111
420*
50
242
28
136
18
87
12
61
(1619.1)
(1868.2)
(493.7)
(1868.2)
(222.4)
(1076.4)
(124.5)
(604.9)
(80.0)
(387.0)
(53.4)
(271.3)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate
lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load
capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
mm
12
(305)
24
(609)
36
(914)
48
(1219)
60
(1524)
72
(1829)
Channel
Style
B62
B62A
B62
B62A
B62
B62A
B62
B62A
B62
B62A
B62
B62A
K = .65
K = 1.0
K = 1.2
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
2052
4666
1350
4275
818
3624
589
2713
456
1765
365**
1225
(9127.7)
(20755.4)
(6005.1)
(19016.1)
(3638.6)
(16120.3)
(2620.0)
(12068.0)
(2028.4)
(7851.1)
(1623.6)
(5449.1)
820
1449
645
1367
471
847
369
504
300
323
248
224
(3647)
(6445)
(2869)
(6081)
(2095)
(3767)
(1641)
(2242)
(1334)
(1437)
(1103)
(996)
2161
4710
1624
4453
1053
4023
745
3421
579
2647
470
1856
(9612.6)
(20951.1)
(7223.9)
(19807.9)
(4684.0)
(17895.2)
(3313.9)
(15217.3)
(2575.5)
(11774.4)
(2090.6)
(8255.9)
1890
4593
1020
3982
633
2965
456
1765
347**
1129
271**
784**
(8407.1)
(20430.7)
(4537.2)
(17712.8)
(2815.7)
(13189.0)
(2028.4)
(7851.1)
(1543.5)
(5022.0)
(1205.4)
(3487.4)
1715
4503
818
3624
515
2179
365**
1225
271**
784**
545**
(7628.7)
(20030.3)
(3638.6)
(16120.3)
(2290.8)
(9692.7)
(1623.6)
(5449.1)
(1205.4)
(3487.4)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
201
(2424.3)
Beam Span
B72 Channel
Thickness: 18 Ga. (1.2 mm)
Standard lengths: 10 (3.05 m)
Standard finishes: Plain, Dura-Green,
Pre-Galvanized
Weight: .29 Lbs./Ft. (.43 kg/m)
13/16
13/16
(20.6)
(20.6)
7/16
(11.1)
3/16
3/16
(4.7)
(4.7)
3/32
13/32
Areas of
Section
Weight
.287
.574
(.43)
(.85)
.084
.169
Section
Modulus (S)
in.4
cm4
in.3
cm3
in.
cm
(.07)
(.32)
.0073
.0192
(.12)
(.31)
.146
.215
(.37)
(.55)
(.54) .0018
(1.09) .0078
.406
(10.3)
B72A
Moment of
Inertia (I)
cm2
B72
B72A
.406
(10.3)
X - X Axis
SECTION PROPERTIES
Channel
.160
(4.0)
.406
(10.3)
(20.6)
(2.4)
(10.3)
13/16
Radius of
Gyration (r)
Moment of
Inertia (I)
in.4
Section
Radius of
Modulus (S) Gyration (r)
cm4
in.3
cm3
in.
(.31)
(.63)
cm
.302 (.77)
.303 (.77)
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
BEAM LOADING
Beam Span
In.
mm
12
(305)
24
(609)
36
(914)
36
(1219)
60
(1524)
Channel
Style
B72
B72A
B72
B72A
B72
B72A
B72
B72A
B72
B72A
Lbs.
In.
mm
Lbs.
Lbs.
116
210*
58
159
39
106
29
80
23
64
(516.0)
(934.1)
(258.0)
(707.2)
.051
.020
.206
.125
.465
.281
.827
.500
1.292
.782
(1.29)
(.51)
(5.23)
(3.17)
113
210*
28
127
13
57
7
32
5
20
(502.6)
(934.1)
(124.5)
(564.9)
75
210*
19
85
8
38
5
21
3
14
(324.7)
(934.1)
(84.5)
(378.1)
(173.5)
(471.5)
(129.0)
(355.8)
(102.3)
(284.7)
(11.81)
(7.14)
(21.00)
(12.70)
(32.81)
(19.86)
(57.8)
(253.5)
(31.1)
(142.3)
(22.2)
(88.9)
(35.6)
(169.0)
(22.2)
(93.4)
(13.3)
(62.3)
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate
lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated
load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced
Height
In.
mm
12
(305)
24
(609)
36
(914)
36
(1219)
60
(1524)
Channel
Style
B72
B72A
B72
B72A
B72
B72A
B72
B72A
B72
B72A
Lbs.
Lbs.
Lbs.
1598
3600
701
2710
313**
1421
177**
799
113**
512**
(7108)
(16013)
539
986
320
802
188
569
122
404
85
298
(2397)
(4386)
1712
3700
1050
3113
473
2135
267**
1211
171**
775
(7615)
(16458)
(3118)
(12054)
(1392)
(6321)
(787)
(3554)
(502)
(2277)
(1423)
(3567)
(836)
(2531)
(542)
(1797)
(378)
(1325)
(4670)
(13847)
(2104)
(9497)
(1187)
(5387)
(760)
(3447)
K = 1.0
Lbs.
1410 (6272)
3433 (15271)
450
(2001)
2043 (9088)
201** (894)
909
(4043)
512** (2277)
327** (1454)
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
202
K = 1.2
Lbs.
1181
3229
313**
1421
631**
355**
(5253)
(14363)
(1392)
(6321)
(2807)
(1579)
SPRING NUT
Part Number
B62
B72
Without
Spring
With
Spring
Without
Spring
Thread
Size
N621
N622
N627
N624
BMM-3L
BMM-4L
BMM-5L
BMM-6L
N621WO
N622WO
N627WO
N624WO
BMM-3
BMM-4
BMM-5
BMM-6
N7221
N7222
N7227
N7224
BMM-3S
BMM-4S
BMM-5S
BMM-6S
N621WO
N622WO
N627WO
N624WO
BMM-3
BMM-4
BMM-5
BMM-6
#8-32
#10-24
#10-32
1/4-20
M3.5 x 0.6
M4 x 0.7
M5 x 0.8
M6 x 1
Wt./C
Thickness
.150
.150
.150
.150
.150
.150
.150
.150
(3.81)
(3.81)
(3.81)
(3.81)
(3.81)
(3.81)
(3.81)
(3.81)
Lbs.
kg
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
(.45)
(.45)
(.45)
(.45)
With
Spring
(.45)
(.45)
(.45)
(.45)
MINI FITTINGS
B6202
B6129
B6340
SQUARE WASHER
13/16
17/8
(47.6)
(20.6)
15/8
(41.3)
9/32 (7.1)
DIA.
13/16
(20.6)
203
Mini Fittings
B6141
B600-62
B6557
27/16
(61.9)
215/16
15/8
(41.3)
(74.6)
41/8
(104.8)
B22
B62
13/16
(20.6)
B6341
B6138
B6139
FOUR HOLE
SPLICE PLATE
THREE HOLE
SWIVEL PLATE
211/16
33/4
(95.2)
(68.2)
17/8
17/8
(47.6)
(47.6)
(101.6)
B6504
B6140
B6143
17/8
(47.6)
15/8
(41.3)
17/8
(47.6)
17/8
(47.6)
17/8
(47.6)
13/16
(20.6)
215/16
(74.6)
204
Mini Fittings
B6133
B6132
B6135
215/16
17/8
17/8
(47.6)
(74.6)
(47.6)
215/16
(74.6)
17/8
(47.6)
215/16
(74.6)
B6337
B6136
FOUR HOLE
CORNER GUSSET PLATE
THREE HOLE
TEE GUSSET PLATE
FOUR HOLE
TEE GUSSET PLATE
17/8
(47.6)
17/8
17/8
(47.6)
(47.6)
215/16
17/8
215/16
(74.6)
(47.6)
(74.6)
B6532
B6101
B6230
FIVE HOLE
TEE GUSSET PLATE
15/16
13/16
(23.8)
(20.6)
215/16
(74.6)
11/4
215/16
(31.7)
(74.6)
205
11/8
(28.6)
B6142
Mini Fittings
B6102
B6103
B6232
THREE HOLE
CORNER ANGLE
Standard finishes: ZN, GRN
Wt./C 7 Lbs. (3.2 kg)
13/16
15/16
(20.6)
17/8
(23.8)
(47.6)
25/16
(58.7)
23/16
11/4
(55.5)
(31.7)
B6104
B6558
B6374
11/8
(28.6)
13/16
17/8
(20.6)
(47.6)
11/4
(31.7)
25/16
(58.7)
13/16
(50.8)
(20.6)
15/8
(41.3)
B6357
B6239
B6144R&L
FOUR HOLE
OFFSET BENT TEE
FIVE HOLE
OFFSET BENT TEE
17/8
(47.6)
215/16
11/8
(74.6)
(28.6)
11/8
(28.6)
215/16
17/8
(47.6)
(74.6)
25/16
(58.7)
(Right shown)
15/16
(23.8)
206
Mini Fittings
B6134R&L
B6234 R&L
B6118
FOUR HOLE
GUSSETTED SHELF ANGLE
Standard finishes: ZN, GRN
Wt./C 15 Lbs. (6.8 kg)
17/8
(47.6)
23/16
(55.5)
17/8
(47.6)
17/8
15/16
(23.8)
(47.6)
25/16
(58.7)
25/16
15/16
(Left shown)
(58.7)
(23.8)
(Left shown)
B6126
B6127
FIVE HOLE
GUSSETTED SHELF ANGLE
13/16
(20.6)
17/8
(47.6)
17/8
25/16
(47.6)
17/8
(58.7)
17/8
(47.6)
(47.6)
11/4
(31.7)
215/16
25/16
(58.7)
(74.6)
B6112
B589-62
TWO HOLE 90
ADAPTER ANGLE
B62
13/16
(20.6)
23/16
(55.6)
27/16
117/32
B22
(61.9)
(38.9)
15/16
(23.8)
(101.6)
15/8
(41.3)
207
15/8
(41.3)
B6533
Mini Fittings
B6147-B6152
B6154
13/32
(10.3)
C
13/32
(10.3)
123/32
(43.6)
Wt./C
Part No.
B6147
B6148
B6149
B6150
B6151
B6152
B
1
82 /2 2 /32
75
21/32
1
67 /2
2
60 131/32
521/2 17/8
371/2
2
(51.6)
(51.6)
(50.8)
(50.0)
(47.6)
(50.8)
27
/32
27
/32
7
/8
15/16
11/16
29
/32
Lbs.
13/32
kg
(10.3)
(21.4)
(22.2)
13/16
45
(21.4)
8.0
(30.1)
13/32
(3.6)
(10.3)
(23.8)
(27.0)
(23.0)
B6162-B6165
B6156-B6161
17/8
(47.6)
(10.3)
(10.3)
13/32
A
17/8
13/32
(47.6)
1
1 /32
(26.2)
(10.3)
Wt./C
Part No.
Wt./C
Part No.
A
30
221/2
15
71/2
B6162
B6163
B6164
B6165
Lbs.
kg
8.0
(3.6)
B6156
B6157
B6158
B6159
B6160
B6161
821/2
19/32
(32.5)
75
671/2
60
521/2
371/2
15/16
13/8
113/32
115/32
121/32
(33.3)
(34.9)
Lbs.
kg
8.0
(3.6)
(35.7)
(37.3)
(42.0)
B6155
B601-62
B6169
TWO HOLE
CLOSED ANGLE
TWO HOLE 45
ADAPTER ANGLE
B62
13/32
(10.3)
17/8
(47.6)
(30.5)
45
13/32
(10.3)
B22
113/64
15/8
45
(41.3)
19/16
(39.7)
15/8
(41.3)
208
B72
17/8
(47.6)
Mini Fittings
B6168
B6167
B6170
(101.6)
(74.6)
B72
17/8
(47.6)
215/16
B62
B72
B6171
B6172
B7116
(10.3)
215/16
(101.6)
(74.6)
B62
231/32
B62
(75.4)
B6107
B6107-62A
B6594
121/32
15/16 (42.0)
(23.8)
13/16
15/8
(41.3)
(20.6)
231/32
(75.4)
231/32
(75.4)
317/32
(89.7)
209
13/32
Mini Fittings
B6173
B6526
B6105
TWO HOLE
OFFSET Z-SUPPORT
TWO HOLE
Z-SUPPORT FOR B62
1/8
(3.2)
15/16
(23.8)
13/16
(20.6)
13/16
121/32
(20.6)
(42.0)
13/4
(44.4)
17/8
(47.6)
13/16
(20.6)
B7105
B6110
B6108
TWO HOLE
Z-SUPPORT FOR B72
TWO HOLE
Z-SUPPORT FOR B62A
TWO HOLE
OFFSET Z-SUPPORT
13/4
(44.4)
13/32
15/16
(10.3)
(23.8)
13/4
17/8
(47.6)
(44.4)
13/4
(44.4)
13/16
(20.6)
B598-62
B6571
13/16
B62
229/32
(20.6)
15/8
(73.8)
23/4
(69.8)
(41.3)
17/8
(47.6)
B22
17/8
(47.6)
13/16
(20.6)
210
Mini Fittings
B6205
B7205
B6211
Z-BEAM CLAMP
13/16
13/32
(20.6)
(10.3)
5/16-18 Setscrew
13/16 (20.6) Max.
included
Flange Thickness
Material: ASTM A36
Standard finishes: ZN, GRN
Wt./C 13 Lbs. (5.9 kg)
3/4
(19.0)
13/16
(20.6)
1/4
(6.3)
17/8
(47.6)
B6409-6, 9
B2350-B2355
BRACKET
25/16
(58.7)
A
Part No.
B62
Part No.
Wt./C
Lbs.
kg
A
6
9
B6409-6
B6409-9
B2350
B2351
B2352
B2353
B2354
B2355
(152.4)
(228.6)
28.0
35.0
(12.7)
(15.8)
O.D. Size
A
O.D.Size
B
Wt./C
Lbs.
kg
1/4
(6.3)
1/4
3/8
(9.5)
3/8
(9.5)
1/2 (12.7)
1/2
(12.7)
1/4
(6.3)
3/8
(9.5)
1/4
(6.3)
1/2
(12.7)
(9.5)
1/2
(12.7)
3/8
1
11/4
7/8
1
11/8
1.2
2.0
2.9
1.6
2.1
2.5
(25.4)
(31.7)
(22.2)
(25.4)
(28.6)
B2308-B2315
ONE HOLE TUBING STRAP
Material: Sizes 1/4 - 1/2, ASTM A611 Gr. C
5/8 - 1, ASTM A1008 SS Gr. 33 Type 1
Standard finishes: ZN, GRN
O.D. Size
A
Part No.
B2308
B2309
B2310
B2311
B2312
B2313
B2314
B2315
(6.3)
(7.9)
/4
/16
3
/8
1
/2
5
/8
3
/4
7
/8
1
(9.5)
(12.7)
(15.9)
(19.0)
(22.2)
(25.4)
B
11/32
13/32
13/16
121/64
125/64
139/64
151/64
21/32
Wt./C
Lbs.
kg
C
(26.2)
(27.8)
(30.1)
(33.7)
(35.3)
(40.9)
(45.6)
(51.6)
.048
.048
.048
.048
.062
.075
.075
.075
(1.2)
(1.2)
(1.2)
(1.2)
(1.6)
(1.9)
(1.9)
(1.9)
1.2
1.4
1.6
1.9
2.7
4.3
4.9
5.2
(.5)
(.6)
(.7)
(.8)
(1.2)
(1.9)
(2.2)
(2.3)
211
B
9/32 (7.1) Dia.
13/16
(20.6)
(.5)
(.9)
(1.3)
(.7)
(.9)
(1.1)
Safety Factor of 2
Uniform Design Load 40 Lbs. (.18 kN)
Standard finishes: ZN, GRN
13/16
Finish
Plain
Specification
ASTM A1011
33,000 PSI min. yield
Dura-Green
Electro-Plated Zinc
Pre-Galvanized
Concrete Inserts
Spot Inserts
Cooper B-Lines Spot Inserts provide for economical single attachment points with full flexibility of
fastener sizing, but with limited adjustment. These products are made from steel strips in accordance
with ASTM A1011, 33,000 PSI min. yield. Standard finish is electro-plated zinc (ASTM B633).
Test Data
Independent Testing Laboratory test data available upon request.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
212
Concrete Inserts
Concrete Inserts
Reference page 212 for general fitting and standard finish specifications.
213
15/8
(41.3)
Concrete Inserts
Length
Part No.
in.
B22-I-3
B22-I-4
B22-I-6
B22-I-8
3
4
6
8
Wt./C
Lbs.
kg
Lbs.
kN
(76)
72
88
120
152
(32.6)
500
800
1000
1200
(2.22)
(101)
(152)
(203)
(39.9)
(54.4)
(68.9)
Length
Part No.
B22-I-12
B22-I-16
B22-I-20
B22-I-24
B22-I-32
B22-I-36
B22-I-40
B22-I-48
B22-I-60
B22-I-72
B22-I-84
B22-I-96
B22-I-108
B22-I-120
B22-I-144
B22-I-168
B22-I-192
B22-I-216
B22-I-240
Design Load
mm
Wt./C
in.
mm
Lbs.
12
16
20
24
32
36
40
48
60
72
84
96
108
120
144
168
192
216
240
(305)
224
289
353
420
553
620
686
820
1018
1218
1417
1616
1816
2016
2416
2816
3216
3616
4016
(406)
(508)
(609)
(813)
(914)
(1016)
(1219)
(1524)
(1829)
(2133)
(2438)
(2743)
(3048)
(3657)
(4267)
(4877)
(5486)
(6096)
kg
(101.6)
(131.1)
(160.1)
(190.5)
(250.8)
(281.2)
(311.1)
(371.9)
(461.7)
(552.5)
(642.7)
(733.0)
(823.7)
(914.4)
(1095.9)
(1277.3)
(1458.7)
(1640.2)
(1821.6)
Reference page 212 for general fitting and standard finish specifications.
214
(3.56)
(4.45)
(5.34)
(101.6)
Design Load for B32-I-12 thru B32-I-240
is 2,000 lbs. (8.89 kN) per foot of concrete
MATERIAL: 12 Gauge (2.6)
insert length with safety factor of 3 in
11/2
(38.1)
3000 psi concrete.
Loads concentrated within the last 2
inches (50.8 mm) of concrete inserts
27/8
8 (203.2 mm) and longer should not
(73.0)
exceed 1,000 lbs. (4.45kN).
Concrete insert should be secured to the
forms on 16 (406.4 mm) to 24 (609.6 mm)
B32-I-3 THRU
11/16
intervals.
B32-I-8
(17.4)
B32-I continuous concrete inserts are
made from B32 channel. Use channel
25/8
13/8
nuts designed for use in B32 channel.
(66.7)
(34.9)
B32-I concrete inserts are supplied with
styrofoam fillers. B3332 end caps are
furnished with inserts through 8 (203.2 mm)
long, and B206 end caps are furnished
15/8
with inserts 12 (304.8 mm) and longer.
(41.3)
3
1 /8
Material: Plain Steel ASTM A1011
(34.9)
33,000 PSI min. yield or Pre-Galvanized
Styrofoam
Steel ASTM A653SS 33,000 PSI min.
B3332
Filler
yield.
End Cap
Finish: Plain, Dura-Green, Pre-Galv,
B206 End Cap
HDG
15/8
(41.3)
3/4
(19.0)
Length
Part No.
in.
B32-I-3
B32-I-4
B32-I-6
B32-I-8
3
4
6
8
B32-I-12
B32-I-16
B32-I-20
B32-I-24
B32-I-32
B32-I-36
B32-I-40
B32-I-48
B32-I-60
B32-I-72
B32-I-84
B32-I-96
B32-I-108
B32-I-120
B32-I-144
B32-I-168
B32-I-192
B32-I-216
B32-I-240
Design Load
Lbs.
kg
Lbs.
kN
(76)
65
80
108
137
(29.5)
500
800
1000
1200
(2.22)
(101)
(152)
(203)
(36.3)
(49.0)
(62.1)
Wt./C
in.
mm
Lbs.
12
16
20
24
32
36
40
48
60
72
84
96
108
120
144
168
192
216
240
(305)
202
262
316
376
496
556
616
736
915
1095
1274
1453
1633
1813
2173
2533
2893
3253
3613
(406)
(508)
(609)
(813)
(914)
(1016)
(1219)
(1524)
(1829)
(2133)
(2438)
(2743)
(3048)
(3657)
(4267)
(4877)
(5486)
(6096)
kg
(91.6)
(118.8)
(143.3)
(170.5)
(225.0)
(252.2)
(279.4)
(333.8)
(415.0)
(496.7)
(577.9)
(659.0)
(740.7)
(822.3)
(985.6)
(1148.9)
(1312.2)
(1475.5)
(1638.8)
Reference page 212 for general fitting and standard finish specifications.
215
(3.56)
(4.45)
(5.34)
Concrete Inserts
Length
Part No.
Wt./C
mm
(101.6)
Concrete Inserts
Length
Wt./C
Design Load
Part No.
in.
mm
Lbs.
kg
Lbs.
kN
B52-I-3
B52-I-4
B52-I-6
B52-I-8
3
4
6
8
(76)
53
63
85
106
(24.0)
400
500
750
1000
(1.78)
(101)
(152)
(203)
(28.6)
(38.5)
(48.1)
Length
Part No.
B52-I-12
B52-I-16
B52-I-20
B52-I-24
B52-I-32
B52-I-36
B52-I-40
B52-I-48
B52-I-60
B52-I-72
B52-I-84
B52-I-96
B52-I-108
B52-I-120
B52-I-144
B52-I-168
B52-I-192
B52-I-216
B52-I-240
in.
12
16
20
24
32
36
40
48
60
72
84
96
108
120
144
168
192
216
240
Wt./C
mm
(305)
(406)
(508)
(609)
(813)
(914)
(1016)
(1219)
(1524)
(1829)
(2133)
(2438)
(2743)
(3048)
(3657)
(4267)
(4877)
(5486)
(6096)
Lbs.
157
202
237
282
373
419
464
556
692
829
965
1107
1237
1374
1648
1922
2196
2470
2744
kg
(71.2)
(91.6)
(107.5)
(127.9)
(169.2)
(190.0)
(210.4)
(252.2)
(313.9)
(376.0
(437.7)
(502.1)
(561.1)
(623.2)
(747.5)
(871.8)
(996.1)
(1120.4)
(1244.6)
Reference page 212 for general fitting and standard finish specifications.
216
(2.22)
(3.33)
(4.45)
15/8
(41.3)
Spot Inserts
N2500
B2500
11/4
(31.7)
SPOT INSERT
Thread
Size
(50.8)
31/4
Part No.
(82.5)
N2500-1/4
N2500-5/16
N2500-3/8
N2500-1/2
N2500-5/8
N2500-3/4
N2500-7/8
Material:
12 Gauge (2.6)
11/2
19/16
(38.1)
(65.0)
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
B2503
SPOT INSERT
Safety Factor of 5
To support 10 (250) pipe use B2505
insert with 5/8-11 Channel Nuts.
To support up to and including 8
(200) pipes use B2506, B2507 and
B2508 inserts with the desired
Channel Nuts.
Standard finish: ZN
Part No.
B2505
B2506
B2507
B2508
B3322
B3332
B3342
B3352
5/16
(7.9)
11/4
(31.7)
Thread
Size
Wt./C
Lbs.
kg
13
13
12
12
11
10
9
(5.9)
(5.9)
(5.4)
(5.4)
(5.0)
(4.5)
(4.1)
Channel
Size
End Caps
25/8
(66.7)
51/16
(128.6)
Design Load
Maximum
Pipe Size
Lbs.
kN
1200
1000
1000
1000
(5.34)
(4.45)
(4.45)
(4.45)
10
8
8
8
(250)
(200)
(200)
(200)
Wt./C
Lbs.
kg
96
88
77
69
(43.5)
(39.9)
(34.9)
(31.3)
Concrete Inserts
B2501
LIGHT DUTY SPOT INSERT
51/2
(139.7)
5/32 (4.0)
15/8
(41.3)
2
(50.8)
15/8
DIA. NAIL
HOLES
Safety Factor of 2
The concrete attachment problem solver for
light duty applications.
Fast and easy applications.
No concrete leakage problems.
One piece unitized construction.
Color coded cap on thread for rod size
identification and to prevent concrete seepage.
(1/4-Yellow, 3/8-Red, 1/2-Blue)
(41.3)
11/4
(31.7)
(203.2)
Design Load
12
(304.8)
Styrofoam End
Caps
Part No.
& Size
B2501-1/4
B2501-3/8
B2501-1/2
Height
Height
A
H
7/8
(61.9)
(22.2)
27/16
(77.8) 17/8 (47.6)
31/16
(104.8) 17/8 (47.6)
41/8
Design Load
kN
Lbs.
kN
250
610
880
(1.11)
16
22
26
(7.2)
Reference page 212 for general fitting and standard finish specifications.
217
Wt./C
Lbs.
(2.71)
(3.91)
(9.9)
(11.7)
Insert Accessories
B205, B206, B220
A
1
113/16
(25.4)
(46.0)
Part No.
Use
With
B205
B206
B220
B22
B32
B52
Wt./C
A
121/32
113/32
27/32
(42.0)
(35.7)
(21.4)
B380
JOINT SPLICE PLATE
Used at splice points to prevent
concrete seepage in long
continuous runs of concrete
A
inserts.
Material: 18 Gauge (1.2)
1/16
Standard finish: GALV
Lbs.
kg
10
8
4
(4.5)
(3.6)
(1.8)
Part No.
Use
With
B3322
B3332
B3342
B3352
B22
B32
B42
B52
25/8
(66.7)
Wt./C
A
1.270
1.000
.645
.460
(32.2)
(25.4)
(16.4)
(11.7)
Lbs.
kg
15
15
15
15
(6.8)
(6.8)
(6.8)
(6.8)
B22IFS-B52IFS
13/4
(44.1)
15/8
(41.3)
(1.6)
B
A
Concrete Inserts
Part No.
B380-22
B380-32
B380-42
B380-52
Use
With
B22
B32
B42
B52
Wt./C
A
15/8
Lbs.
(41.3)
13/8
(34.9)
1
13/16
(25.4)
(20.6)
11
10
9
7
kg
(5.0)
(4.5)
(4.1)
(3.2)
Wt./C
Part No.
Ft.
mm
B22-IFS
B32-IFS
B52-IFS
4
4
4
(1219)
(1219)
(1219)
B
17/32
1
21/32
(309)
(254)
(167)
Lbs.
kg
10
9
7
(4.5)
Part No.
BD40
Sleeve
Diameter
All Dia.
BD40
Wall
Thickness
5/16
& under
BE-5-8
Schedule 80 pipe
BE-9-12
9 - 14
Schedule 80 pipe
Reference page 212 for general fitting and standard finish specifications.
218
(4.1)
(3.2)
Anchors
WEDGE ANCHOR
Catalog
Number
Thread
Size
AWA-37-225
AWA-37-275
AWA-37-300
AWA-37-350
AWA-37-375
AWA-37-500
AWA-50-275
AWA-50-375
AWA-50-450
AWA-50-550
AWA-50-700
3/8"-16
3/8"
3/8"-16
3/8"
Thread
Length
Size
in.
21/4"
x
x 23/4"
3/8" x 3"
3/8" x 31/2"
3/8" x 33/4"
3/8" x 5"
1/2" x 23/4"
1/2" x 33/4"
1/2" x 41/2"
1/2" x 51/2"
1/2" x 7"
3/8"-16
3/8"-16
3/8"-16
3/8"-16
1/2"-13
1/2"-13
1/2"-13
1/2"-13
1/2"-13
Drill/Hole
Size
mm
in.
mm
(9 x 57)
(9 x 70)
(9 x 76)
(9 x 89)
(9 x 95)
(9 x 127)
(13 x 70)
(13 x 95)
(13 x 114)
(13 x 140)
(13 x 178)
11/4"
(32)
(41)
(47)
(60)
(66)
(98)
(35)
(60)
(79)
(105)
(143)
15/8"
17/8"
23/8"
25/8"
37/8"
13/8"
23/8"
31/8"
41/8"
55/8"
Load Cap.
Tension*
Load Cap.
Shear*
in.
mm
lbs.
kN
lbs.
kN
3/8
(9)
760
(3.38)
940
(4.18)
1/2
(13)
Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
Rod
Size
Overall
Length
ADH-25
ADH-37
ADH-50
9323
9343
9353
1/4-20
in.
3/8-16
1/2-13
1/4
3/8
1/2
7/8
Sleeve
Length
mm
(22)
in.
15/16 (33)
13/4 (44)
-------
Drill/Hole
Diameter
5/8
mm
(16)
3/8
in.
mm
(9)
15/16
(24)
5/8
(16)
11/4
(32)
3/4
(19)
----
--
----
--
---
---
Load Cap.
Tension*
lbs.
285
520
1005
----
kN
(1.27)
(2.31)
(4.47)
----
Load Cap.
Shear*
lbs.
300
640
1005
----
kN
(1.33)
(2.84)
(44.70)
----
Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
Shank Size
Drill/Hole
Size
& Length
Size
in.
Load Cap.
Tension*
mm
in.
mm
Lbs.
kN
485
(2.16)
Load Cap.
Shear*
Lbs.
kN
610
(2.71)
ARC-25-125
1/4-20
1/4
x 11/4
(6 x 32)
1/4
(6)
ARC-37-150
3/8-16
1/4
11/2
(6 x 38)
1/4
(6)
650
(2.89)
660
(2.93)
ARC-50-275
1/2-13
3/8
x 23/4
(9 x 70)
1/4
(6)
1510
(6.71)
1580
(7.03)
Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
Rod
Size
Shank Size
& Length
in.
Load Cap.
Tension* In 12 Ga.
mm
Lbs.
x 1
(6 x 25)
390
(1.75)
1260
(5.60)
x 1 *
(6 x 25)
512
(2.28)
1260
(5.60)
11/2
(6 x 38)
390
(1.75)
1260
(5.60)
x 11/2
(6 x 38)
512
(2.28)
1260
(5.60)
(6 x 51)
390
(1.75)
1260
(5.60)
ARS-25-100
1/4-20
1/4
ARS-37-100HN
3/8-16
1/4
ARS-37-150
3/8-16
1/4
ARS-37-150HN
3/8-16
1/4
ARS-37-200
3/8-16
1/4
x 2
kN
Load Cap.
Tension* In 1/4
Lbs.
kN
Note: Loads shown for ASTM A36 beams and ASTM A572 steel purlins include a safety factor of 4.
For UL and FM listings, steel rapid rod must be installed with a retaining nut.
Reference page 212 for general fitting and standard finish specifications.
219
Concrete Inserts
Catalog
Number
Anchors
PLASTIC SCREW ANCHORS
Kits contain 100 anchors, 100 screws, and 1 concrete drill bit
Catalog
Screw
Number
Size
#8 x 1
#10 x 1
#12 x 1
APC-8K
APC-10K
APC-12K
Load Cap.
Tension*
Load Cap.
Shear*
Lbs.
kN
Lbs.
110
140
140
(0.49)
kN
70
90
90
(0.62)
(0.62)
(0.31)
(0.40)
(0.40)
WOOD-KNOCKER ANCHORS
Catalog
Number
Rod
Size
ACPW-25
ACPW-37
ACPW-50
ACPW-62
ACPW-75
1/4-20
Color
Insert Thread
Length
in.
3/8-16
1/2-13
5/8-11
3/4-10
Brown
Green
Yellow
Red
Purple
3/8
mm
(9)
5/8
(16)
11/16
(17)
15/16
(24)
11/8
(28)
Overall
Length
in.
17/8
17/8
17/8
17/8
17/8
mm
(47)
(47)
(47)
(47)
(47)
Load Cap.
Tension*
lbs.
Load Cap.
Shear*
kN
(4.13)
930
1200
1200
1160
1160
(5.33)
(5.33)
(5.16)
(5.16)
lbs.
370
1330
1840
2800
2800
kN
(1.64)
(5.91)
(8.18)
(12.45)
(12.45)
Notes: Based on normal weight concrete with minimum compression strength of 3,000 psi.
Allowable load capacities are calculated using applied safety factor of 4.
Minimum embedment is 2 (51mm).
Wood-Knocker is a trademark of Powers Fasteners
Concrete Inserts
BANG-IT ANCHORS
Catalog
Number
Rod
Size
ACPD-25
ACPD-37
ACPD-50
ACPD-62
ACPD-75
ACPD-87
1/4-20
Color
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
Brown 3/8
Green 5/8
Yellow 11/16
Red 15/16
Purple 11/8
Black 15/16
mm
lbs.
kN
lbs.
kN
lbs.
kN
lbs.
kN
(9)
1112
1435
1775
2200
2200
2200
(4.94)
830
830
830
990
990
990
(3.69)
625
837
837
837
837
837
(2.78)
625
837
837
837
837
837
(2.78)
(16)
(17)
(24)
(28)
(33)
(6.38)
(7.89)
(9.78)
(9.78)
(9.78)
(3.69)
(3.69)
(4.40)
(4.40)
(4.40)
(3.72)
(3.72)
(3.72)
(3.72)
(3.72)
Notes: Based on normal weight concrete with minimum compression strength of 3,000 psi.
Allowable load capacities are calculated using applied safety factor of 4.
Minimum insert spacing of 12 (305mm), minimun end spacing of 12 (305mm).
Minimum embedment is 2 (51mm).
Length of sleeve is 33/8 (86mm.
Bang-It is a trademark of Powers Fasteners
Reference page 212 for general fitting and standard finish specifications.
220
(3.72)
(3.72)
(3.72)
(3.72)
(3.72)
Anchors
1/4
CONCRETE SCREWS
Catalog
Number
Rod
Size
in.
ACS-125H
ACS-175H
ACS-225H
ACS-275H
ACS-325H
Drill/Hole
Size
Load Cap.
Tension*
Load Cap.
Shear*
mm
in.
mm
lbs.
kN
lbs.
kN
1/4
11/4
(6 x 32)
3/16
(5)
(6 x 44)
3/16
(5)
(6 x 57)
3/16
(5)
(6 x 70)
3/16
(5)
(6 x 82)
3/16
(5)
205
205
205
205
205
(0.91)
13/4
21/4
23/4
31/4
265
265
265
265
265
(1.18)
1/4
x
x
1/4 x
1/4 x
1/4 x
(1.18)
(1.18)
(1.18)
(1.18)
(0.91)
(0.91)
(0.91)
(0.91)
Note: Based on 1 (25mm) embedment with concrete compression strength of 4,000 psi using applied safety factor of 4.
Consult factory for loading of other embedment depths.
Rod
Size
3/8-16
Thread
Depth
Drill/Hole
Size
Load Cap.
Tension*
in.
mm
in.
mm
Lbs.
11/16
(17)
1/2
(13)
540
Load Cap.
Shear*
kN
Lbs.
kN
825
(3.67)
(2.40)
Note: Based on concrete compression strength of 4,000 psi in uncracked concrete using applied safety factor of 4.
Minimun concrete thickness 4 (101mm) with minimum embedment of 15/8 (41mm)
WALL SCREWS
Catalog
Number
Head
Type
Thread
Depth
in.
Minimum
Embedment
Load Cap.
Tension*
mm
in.
mm
Lbs.
Load Cap.
Shear*
kN
Lbs.
kN
AWS-CH
Combo
3/16
x 11/4
(5 x 32)
3/4
(19)
90
(0.40)
260
(1.15)
AWS-OH
Oval
3/16
x 11/4
(5 x 32)
3/4
(19)
90
(0.40)
260
(1.15)
Pan
3/16
11/4
(5 x 32)
3/4
(19)
90
(0.40)
260
(1.15)
AWS-PH
Anchor Size
& Length
in.
ASA-37-187HN
ASA-37-300HN
ASA-37-400HN
ASA-50-225HN
ASA-50-300HN
ASA-50-400HN
ASA-50-525HN
ASA-50-600HN
3/8
mm
x 17/8 (9 x 47)
3/8 x 3
(9 x 76)
3/8 x 4
(9 x 101)
1/2 x 21/4 (13 x 57)
1/2 x 3
(13 x 76)
1/2 x 4
(13 x 101)
1/2 x 51/4 (13 x 133)
1/2 x 6
(13 x 152)
Thread
Length
Drill/Hole
Minimum
Diameter Embedment
Load Cap.
Tension*
Load Cap.
Shear*
in.
mm
in.
mm
in.
mm
lbs.
kN
lbs.
kN
15/8
15/8
15/8
21/4
21/4
21/4
21/4
21/4
(41)
3/8
(9)
(41)
(9)
(41)
3/8
(9)
(57)
1/2
(13)
(57)
1/2
(13)
(57)
1/2
(13)
(57)
1/2
(13)
(57)
1/2
(13)
610
610
610
1055
1055
1055
1055
1055
(2.71)
3/8
670
670
670
1255
1255
1255
1255
1255
(2.98)
(41)
15/8
15/8
15/8
21/4
21/4
21/4
21/4
21/4
(41)
(41)
(57)
(57)
(57)
(57)
(57)
(2.98)
(2.98)
(5.58)
(5.58)
(5.58)
(5.58)
(5.58)
Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
Reference page 212 for general fitting and standard finish specifications.
221
(2.71)
(2.71)
(4.69)
(4.69)
(4.69)
(4.69)
(4.69)
Concrete Inserts
Note: Based on concrete compression strength of 4,000 psi. Allowable load capacities are calculated using an
applied safety factor of 4.
Slotted Angle
Cooper B-Line Slotted Angle is an all-purpose
framing system, roll formed from high strength
steel strips. It is designed to be used as
economical shelving, racks or electrical and
mechanical supports. The unique pattern of
horizontal and vertical slots permits full flexibility.
Three basic sizes are available for light, medium,
and heavy duty applications.
Finish
Plain
Specification
ASTM A1011
33,000 PSI min. yield
Electro-Plated Zinc ASTM B633 SC3
Dura-Green
Pre-Galvanized
ASTM A653
33,000 PSI min. yield
Lengths
Standard lengths are 10 (3.05 m) and 12 (3.66 m).
Slotted Angle is shipped in ten piece bundles
complete with 75 pieces of 3/8 x 3/4 (19mm) hex
head cap screws and 3/8 hex nuts.
Metric
Slotted Angle
222
SA158
Transverse Slots
14 Gauge (1.9)
15/8 x 15/8
Standard finishes: ZN, GRN
Wt./Ft. .66 Lbs. (.98 kg/m)
Longitudinal Slots
137/64
(40.1)
3/4
(19.0)
11/2
(38.1)
3/4
(19.0)
10 (3.05 m)
12 (3.66 m)
137/64
(40.1)
SA276
Transverse Slots
14 Gauge (1.9)
15/8 x 23/8
Standard finishes: ZN, GRN
Wt./Ft. .78 Lbs. (1.17 kg/m)
Longitudinal Slots
137/64
(40.1)
3/4
(19.0)
11/2
(38.1)
3/4
(19.0)
10 (3.05 m)
12 (3.66 m)
25/16
(58.7)
SA318
Transverse Slots
12 Gauge (2.6)
15/8 x 31/8
Standard finishes: ZN, GRN
Wt./Ft. 1.32 Lbs. (1.96 kg/m)
Longitudinal Slots
137/64
(40.1)
3/4 11/2
(19.0) (38.1)
3 (76.2) Centers
10 (3.05 m)
12 (3.66 m)
33/32
(78.6)
Reference page 222 for general fitting and standard finish specifications.
223
Slotted Angle
3/4
(19.0)
Z-Section
Broad Channel
Z-Section with
Stiffener
T-Section
Narrow Channel
T-Section with
Stiffener
J-Section
I-Section
For greater strength required in some applications, Slotted Angle may be fastened together to create combination shapes. A
number of these combinations are illustrated above. Refer to the following table for load capacities of these combinations.
Beam Sections illustrated are single sections, except J, N, and P.
BEAM LOADING
SA158-15/8 (41.3) x 15/8 (41.3) x 14 Gauge (1.9)
Slotted Angle
Beam Span
48 (1219 mm) 60 (1524 mm)
72 (1829 mm)
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
825
(3670)
525
(2335)
340
(1512)
230
(1023)
180
(800)
1100
(4893)
800
(3558)
540
(2402)
370
(1646)
250
(1112)
1100
(4893)
800
(3558)
540
(2402)
370
(1646)
250
(1112)
1300
(5782)
900
(4003)
625
(2780)
450
(2001)
330
(1468)
275
(1223)
200
(889)
1900
(8451)
1360
(6049)
1050
(4670)
825
(3670)
660
(2936)
530
(2357)
400
(1779)
2300
(10231)
1850
(8229)
1450
(6450)
1100
(4893)
950
(4226)
800
(3558)
700
(3114)
2200
(9786)
1650
(7339)
1225
(5449)
930
(4137)
700
(3114)
550
(2446)
450
(2001)
Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span,
multiply uniform load by 0.5.
Reference page 222 for general fitting and standard finish specifications.
224
Lbs.
Lbs.
Lbs.
680 (3025)
450 (2001)
340 (1512)
830 (3692)
550 (2446)
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
360 (1601)
210
(934)
150
(667)
800 (3558)
610
(2713)
480
(2135)
340
1512
250
(1112)
970 (4315)
820
(3647)
650
(2891)
550 (2446)
420
(1868)
340
(1512)
1090 (4848)
920 (4092)
820
(3647)
680
(3025)
710
(3158)
550 (2446)
420
(1868)
320
(1423)
1040 (4626)
820 (3647)
640
(2847)
490
(2179)
1160
(5160)
1030 (4581)
5780 (25711) 3640 (16191) 2820 (12544) 2200 (9786) 1700 (7562)
850
(3781)
680
(3025)
(3114)
4320 (19216) 3000 (13344) 2140 (9519) 1600 (7117) 1290 (5738)
H
I
980
(4359)
874
(3888)
700
4910 (21841) 3830 (17036) 3000 (13344) 2550 (11343) 2190 (9741) 1880 (8362)
1640
(7295)
1430 (6361)
6360 (28290) 4590 (20417) 3470 (15435) 2910 (12944) 2550 (11343) 2240 (9964)
2010
(8941)
1840 (8185)
Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span,
multiply uniform load by 0.5.
BEAM LOADING
SA318-15/8 (41.3) x 31/8 (79.4) x 12 Gauge (2.6)
Beam Span
24 (609 mm) 36 (914 mm) 48 (1219 mm) 60 (1524 mm) 72 (1829 mm) 84 (2133 mm) 96 (2438 mm) 108 (2743 mm) 120 (3048 mm)
Lbs.
1140 (5071)
850 (3781)
690 (3069)
1250 (5560)
850 (3781)
600 (2669)
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
Lbs.
400
(1779)
790
(3514)
4800 (21351) 2750 (12232) 1800 (8007) 1280 (5694) 1000 (4448)
Lbs.
Lbs.
610 (2713)
1100 (4893)
960 (4270)
4160 (18504) 3560 (15835) 3130 (13923) 2750 (12232) 2400 (10676) 2170 (9652)
1950 (8674)
1780 (7918)
1020 (4537)
700 (3114)
G 10600 (47151) 6050 (26912) 4440 (19750) 3330 (14812) 2670 (11877) 2120 (9430) 1660 (7384)
1210 (5382)
1000 (4448)
6100 (27134) 4620 (20551) 3670 (16325) 3110 (13834) 2680 (11921) 2380 (10587) 2100 (9341)
1950 (8674)
13700 (60940) 7800 (34696) 5900 (26244) 4600 (20462) 3800 (16903) 3190 (14190) 2630 (11699) 2170 (9652)
1810 (8051)
H
I
8180 (36386) 5000 (22241) 3650 (16236) 2750 (12232) 2200 (9786)
7900 (35141) 6300 (28024) 5050 (22463) 4070 (18104) 3240 (14412) 2630 (11699) 2170 (9652)
10050 (44704) 8000 (35586) 6320 (28113) 5350 (23798) 4650 (20684) 4040 (17971) 3520 (15658) 3120 (13878)
12700 (56492) 9550 (42480) 7540 (33539) 6540 (29091) 5730 (25488) 5030 (22374) 4520 (20106) 4000 (17793)
1810 (8051)
Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span, multiply
uniform load by 0.5.
Reference page 222 for general fitting and standard finish specifications.
225
Slotted Angle
T-Section
Single Piece
Broad Channel
Section
Narrow Channel
Section
Dual Channel
Section
T-Channel
Section
Uneven Channel
Section
Uneven T-Section
T-Channel
Section
I-Section
Uneven I-Section
For greater strength required in some applications, Slotted Angle may be fastened together to create combination shapes. A
number of these combinations are illustrated above. Refer to the following table for load capacities of these combinations.
Column Height
48 (1219 mm)
60 (1524 mm)
72 (1829 mm)
Lbs.
Lbs.
Lbs.
Lbs.
1450
(6450)
1150
(5115)
950
(4226)
750
(3336)
3850
(17125)
3500
(15569)
3000
(13344)
2500
(11120)
M
N
O
P
Q
R
2280
4760
4940
7270
9520
9865
Lbs.
(10142) 1970
Lbs.
(8763)
1520
3995
4310
6370
7990
8620
Lbs.
(6761)
1070
3140
3870
5840
6280
7715
(17770)
(19172)
(28335)
(35541)
(38343)
Lbs.
(4759)
660
2340
3665
4930
4660
6740
(13967)
(17214)
(25977)
(27935)
(34318)
Lbs.
(2936)
Lbs.
2060 (9163)
2870 (12766)
4115 (18304)
(10409) 1750
(7784)
(16303) 2700
(12010)
(21930) 3850
(17125)
(20729) 3500
(15569)
(29981) 5365
(23865)
Lbs.
1610
2060
3210
(7161)
(9163)
(14279)
Slotted Angle
M
N
O
P
Q
R
3470
7970
8770
12560
15940
17550
Lbs.
Lbs.
Lbs.
Lbs.
(8763)
1280
5270
7690
10480
10560
15360
(5694)
3670
6970
9470
7370
13970
(23442)
(34207)
(46617)
(46973)
(68324)
Lbs.
2580
6260
8370
5170
12570
(16325)
(31004)
(42124)
(32783)
(62141)
(11476)
(27846)
(37231)
(22997)
(55914)
Lbs.
5460 (24287)
6880 (30604)
10970 (48797)
226
Lbs.
4460
5370
8960
(19839)
(23887)
(39856)
Standard finishes: ZN
Load CapacityPer Kit: 400 Lbs. (181.4 kg)
or
3 4 5
Item #
Description
Quantity
1
2
3
4
5
6
7
8
9
AHHK
1/4
AHHK
3/8
4
4
4
4
4
16
16
4
2
4
4
4
4
4
16
4
2
1
6 7
Note 1: Flat washers are required for 1/4-20 hanging rods only.
SA101
SA102
SA154
CONNECTION PLATE
ANGLE BRACE
RIGID CASTER
53/32
(129.4)
12 Gauge
29/32
33/16
(80.9)
(101.6)
41/2
(114.3)
14 Gauge
(57.9)
51/4
73/8
(187.3)
4 (101.6)
Dia. Wheels
(133.4)
33/16
(80.9)
SA155
SWIVEL CASTER
Safety Factor of 1.5
300 Lbs. (136.1 kg) maximum load
capacity
Caster material: Phenolic
Standard finishes: ZN, GRN
Wt./Ea. 2.2 Lbs. (1.0 kg)
4
(101.6)
SA110
SA131
SLOTTED STRAP
Standard finishes:
Wt./Ea. 16 Lbs. (7.26 kg)
41/2
(114.3)
51/4
15/16
(133.4)
(33.3)
CLEATS: To reinforce load-bearing joints, cleats can be field made by cutting 21/4 (57.1) long segments from the widest slotted angle available.
Use SA276 for light duty cleats and SA318 for heavy duty cleats.
SPLICE PLATES: To assemble two pieces of slotted angle using a butt joint requires a 6 (152.4) splice plate for reinforcement.
Reference page 222 for general fitting and standard finish specifications.
227
Slotted Angle
4 (101.6)
Dia. Wheels
Reference Data
METRIC CONVERSION CHART
To Convert From
To
Multiply By
radian (rad)
degree
0.01745329
57.29578
Area
foot2
inch2
circular mil
sq. centimeter (cm2)
square meter (m2)
square meter (m2)
square meter (m2)
0.09290304
0.00064516
0.0000000005067075
0.1550003
10.76391
1550.003
1973523000.0
Temperature
degree Fahrenheit
degree Celsius
degree Celsius
degree Fahrenheit
tC=(tF -32)/1.8
tF=1.8tC+32
Force
pounds-force (lbf)
newtons (N)
4.448222
Reference Data
Angle
degree
radian (rad)
To Convert From
Bending Moment or Torque
lbf ft
lbf in
Nm
Nm
Mass
ounce (avoirdupois)
pound (avoirdupois)
ton (short, 2000 lb)
ton (long, 2240 lb)
kilogram (kg)
kilogram (kg)
kilogram (kg)
kilogram (kg)
Mass Per Unit Length
lb/ft
lb/in
kg/m
kg/m
Mass Per Unit Volume
lb/ft3
lb/in3
kg/m3
kg/m3
lbs/ft3
Mass Per Unit Area
lb/ft2
kg/m2
Pressure or Stress
lbf/in2 (psi)
kip/in2 (ksi)
lbf/in2 (psi)
pascal (Pa)
pascal (Pa)
megapascals (MPa)
To Convert From
To
Multiply By
Length
foot (ft)
inch (in)
mil
inch (in)
meter (m)
meter (m)
meter (m)
micrometer (m)
meter (m)
meter (m)
meter (m)
micrometer (m)
foot (ft)
inch (in)
mil
inch (in)
0.3048
0.0254
0.0000254
25400.00
3.280840
39.37008
39370.08
0.00003937008
Volume
foot3
inch3
cubic centimeter (cm2)
cubic meter (m3)
cubic meter (m3)
gallon (U.S. liquid)
0.02831685
0.00001638706
0.06102374
35.31466
61023.76
0.003785412
S (m3)
I (m4)
E (Pa)
S (in3)
I (in4)
E (psi)
0.00001638706
0.0000004162314
6894.757
61023.74
2402510.0
0.0001450377
Section Properties
section modulus S (in3)
moment of inertia I (in4)
modulus of elasticity E (psi)
section modulus S (m3)
moment of inertia I (m4)
modulus of elasticity E (Pa)
To
Multiply By
1.355818
0.1129848
0.7375621
8.850748
kilogram (kg)
kilogram (kg)
kilogram (kg)
kilogram (kg)
ounce (avoirdupois)
pound (avoirdupois)
ton (short, 2000 lb)
ton (long, 2240 lb)
0.02834952
0.4535924
907.1847
1016.047
35.27396
2.204622
0.001102311
0.0009842064
Abbreviations
Defl. = Deflection
S.F. = Safety Factor
Ft. = Feet
Pre-galv. = Pre-galvanized Steel
K Factor = Deflection load in Lbs./Ft.
o.c. = On Center
PVC = Poly Vinyl Chloride
In. = Inch
psi = Pounds per Square Inch
wt./c = Weight per 100 pieces
1.488164
17.85797
0.6719689
0.5599741
Metric Symbols
m = meter
16.01846
27679.9
0.06242797
0.0000361273
1728.0
cm = centimeter
mm = millimeter
m = micrometer
kg = kilogram
4.882428
0.2048161
pascal (Pa)
pascal (Pa)
megapascals (MPa)
pound-force per square inch (psi)
kip per square inch (ksi)
lbf/in2 (psi)
6894.757
6894757.0
0.006894757
0.0001450377
0.0000001450377
145.0377
N = newton
kN = kilonewton
228
Pa = pascal
MPa = megapascal
Reference Data
DESIGN LOAD DATA (For typical channel-fitting connections when USED IN PAIRS).
90 Fittings
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
kN
1500
1000
750
(6.67)
1000
650
500
(4.45)
2000
1500
900
(8.90)
1500
1150
650
(6.67)
1500
1000
1000
(6.67)
1000
650
500
(4.45)
(4.45)
(3.34)
(2.89)
(2.22)
(6.67)
(4.00)
(5.12)
(2.89)
(4.45)
(4.45)
(2.89)
(2.22)
Design load data includes a safety factor of 2.5 (safety factor = ratio of ultimate load to design load).
90 Fittings
Channel
Thickness
(2.6)
12 ga.
(1.9)
14 ga.
(1.5)
16 ga.
Flat Fittings
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
kN
2500
2000
1500
(11.12)
2000
1650
1250
(8.90)
3000
2000
1500
(13.34)
2500
1650
1250
(11.12)
1000
500
600
(4.45)
1000
800
600
(4.45)
(8.90)
(6.67)
(7.34)
(5.56)
(8.90)
(6.67)
229
(7.34)
(5.56)
(3.56)
(2.67)
(3.56)
(2.67)
Reference Data
Channel
Thickness
(2.6)
12 ga.
(1.9)
14 ga.
(1.5)
16 ga.
Reference Data
Reference Data
TABLE 1: MAXIMUM NUMBER OF WIRES (Adjusted per NEC Table 384.22 for 40% fill)
Use this table to determine the type and number of conductors for use with Cooper B-Lines strut-type channel raceway
using external joiners. This table applies for all installations except for the support and supply of electric discharge type
lighting fixtures. See table 2 and 3 for further information.
Insulation
Type
FEP,
FEPB
RH, RHH,
RHW
T, TW
THHN,
THWN
THW
XHHW
Wire Size
AWG.
B11
B11K06
B12
B12K06
B22
B22K06
B24
B24K06
B26
B26K06
B32
B32K06
B56
B56K06
14
12
10
8
6
14
12
10
8
6
14
12
10
8
6
14
12
10
8
6
14
12
10
8
6
14
12
10
8
6
172
126
90
51
24
52
45
37
20
14
124
95
69
36
21
178
130
82
46
33
82
66
52
29
21
124
95
71
37
27
127
92
66
38
17
38
33
27
14
10
91
70
51
26
15
131
95
60
34
24
61
49
38
21
15
91
70
52
27
20
81
59
42
24
11
24
21
17
9
6
58
45
33
17
9
84
61
38
21
15
39
31
24
13
10
58
45
33
17
13
81
59
42
24
12
26
22
18
10
7
58
45
33
18
10
84
61
38
22
16
39
31
24
14
10
58
45
33
19
14
81
59
42
24
12
27
23
19
10
7
58
45
33
19
11
84
61
38
22
16
39
31
24
15
11
58
45
33
19
14
67
49
35
20
9
20
17
14
7
5
48
37
27
14
8
69
50
32
17
12
32
26
20
11
8
48
37
28
14
10
36
26
19
11
5
12
10
8
4
3
26
20
14
8
5
37
27
17
10
7
17
14
11
6
5
26
20
15
8
6
230
Reference Data
TABLE 2: MAXIMUM NUMBER OF WIRES
Also suitable for the number of wires in table below when installed to support and supply electric discharge type
lighting fixtures when raceway wiring is suitable for at least 70C and clearance between fixture and raceway is at
least 1/8. In all cases, a snap-in cover is required to complete the raceway enclosure.
Wire Size
B56
B56K06
14
13
10
10
10
10
10
12
13
10
10
10
10
10
10
13
10
10
When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 AWG.
Wire Size
B56
B56K06
14
10
10
10
10
10
10
12
10
10
10
10
10
10
10
When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 AWG.
231
Reference Data
Reference Data
The data shown in the beam load charts for appropriate channels on page(s) 17 thru 39 is for simply supported, single
span beams with a uniformly distributed load. For other loading and/or support conditions, use the appropriate factor
from the chart below.
Load
Factor
Reference Data
Deflection
Factor
1.00
1.00
.50
.80
1.00
1.10
1.50
.30
1.00
.40
.25
2.40
.12
3.20
1.30
.92
1.00
.42
Continuous Beam - Two Equal Spans - Concentrated Load at Center of One Span
.62
.71
Continuous Beam - Two Equal Spans - Concentrated Load at Center of Both Spans
.67
.48
Span
Span
EXAMPLES:
PROBLEM:
Calculate the maximum allowable load and corresponding
deflection of a simply supported B22 beam with a concentrated
load at midspan as shown.
PROBLEM:
Calculate the maximum allowable load and corresponding
deflection of a cantilever B52 beam with a uniformly distributed
load.
96
SOLUTION:
From beam load chart for B22 (page 22), maximum allowable
load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in the chart above.
SOLUTION:
From beam load chart for B52 (page 33), maximum allowable
load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in chart above.
232
Reference Data
RIGID STEEL CONDUIT (HEAVY WALL CONDUIT)
Nominal
Conduit Size
Nominal
Inside
Diameter
Outside
Diameter
mm
In.
mm
In.
(10)
1/2
(15)
3/4
(20)
1
11/4
11/2
2
21/2
3
31/2
4
5
6
(25)
0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
(17.1)
0.493
0.632
0.836
1.063
1.394
1.624
2.083
2.489
3.090
3.570
4.050
5.073
6.093
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(21.3)
(26.7)
(33.4)
(42.2)
(48.3)
(60.3)
(73.0)
(88.9)
(101.6)
(114.3)
(141.3)
(168.3)
mm
(12.5)
(16.0)
(21.3)
(27.0)
(35.4)
(41.3)
(52.9)
(63.2)
(78.5)
(90.7)
(102.9)
(128.9)
(154.8)
Lbs.
kg
51.5
79.0
105.0
153.0
201.0
249.0
332.0
527.0
682.6
831.0
972.3
1313.6
1745.3
(23.4)
(35.8)
(47.6)
(69.4)
(91.2)
(113.0)
(150.6)
(239.1)
(309.6)
(376.9)
(441.0)
(595.9)
(791.7)
Weight of Conduit
and Conductors
Per 100 Ft. (30.5m)*
Lbs.
65.1
101.1
145.8
219.3
318.3
408.8
593.8
901.0
1259.0
1604.0
1967.0
2876.0
4003.0
kg
(29.5)
(45.9)
(66.1)
(99.5)
(144.4)
(185.4)
(269.3)
(408.7)
(571.1)
(727.6)
(892.2)
(1304.5)
(1815.7)
Nominal
Inside
Diameter
Outside
Diameter
In.
mm
In.
mm
In.
1/2
(15)
(20)
1
11/4
11/2
2
21/2
3
31/2
4
(25)
0.815
1.029
1.290
1.638
1.883
2.360
2.857
3.476
3.971
4.466
(20.7)
3/4
.675
.879
1.120
1.468
1.703
2.170
2.597
3.216
3.711
4.206
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(26.1)
(32.7)
(41.6)
(47.7)
(59.9)
(72.5)
(88.3)
(100.8)
(113.4)
Minimum Weight
Per 100 Ft. (30.5m) with
Couplings Attached
mm
(17.1)
(22.3)
(28.4)
(37.3)
(43.3)
(55.1)
(66.0)
(81.7)
(94.3)
(106.8)
Lbs.
kg
60.0
82.0
116.0
150.0
182.0
242.0
428.0
526.0
612.0
682.0
(27.2)
(37.2)
(52.6)
(68.0)
(82.5)
(109.7)
(194.1)
(238.6)
(277.6)
(309.4)
Weight of Conduit
and Conductors
Per 100 Ft. (30.5m)*
Lbs.
82.1
122.8
182.3
267.3
341.8
503.8
775.0
1069.0
1346.0
1632.0
kg
(37.2)
(55.7)
(82.7)
(121.2)
(155.0)
(228.5)
(351.5)
(485.0)
(610.8)
(740.5)
*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.
Rigid and Intermediate Metal Conduit shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each
outlet box, junction box, cabinet, or fitting, except for straight runs of conduit connected with couplings which may be
supported in accordance with NEC Article 345 and 346, provided such supports prevent transmission of stresses to
termination where conduit is deflected between supports.
Conduit Size
In.
mm
Feet
Meters
1/2-3/4
(15-20)
10
(3.05)
(25)
12
(3.66)
11/4-11/2
(32-40)
14
(4.27)
2-21/2
(50-65)
16
(4.88)
3-6
(80-150)
20
(6.10)
233
Reference Data
In.
3/8
Minimum Weight
Per 100 Ft. (30.5m) with
Couplings Attached
Reference Data
ELECTRICAL METALLIC TUBING (EMT) THINWALL CONDUIT
Reference Data
Nominal
Conduit Size
Outside
Diameter
Inside
Diameter
In.
mm
In.
mm
In.
3/8
(10)
(15)
3/4
(20)
1
11/4
11/2
2
21/2
3
31/2
4
(25)
0.577
0.706
0.922
1.163
1.510
1.740
2.197
2.875
3.500
4.000
4.500
(14.7)
1/2
0.493
0.622
0.824
1.049
1.380
1.610
2.067
2.731
3.356
3.834
4.334
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(17.9)
(23.4)
(29.5)
(38.3)
(44.2)
(55.8)
(73.0)
(88.9)
(101.6)
(114.3)
Weight
Per 100 Ft. (30.5m)
mm
(12.5)
(15.8)
(20.9)
(26.6)
(35.1)
(40.9)
(52.5)
(69.4)
(85.2)
(97.4)
(110.1)
Lbs.
kg
23.0
28.5
43.5
64.0
95.0
110.0
140.0
205.0
250.0
325.0
370.0
(10.4)
(12.9)
(19.7)
(29.0)
(43.1)
(49.9)
(63.5)
(93.0)
(113.4)
(147.4)
(167.8)
Weight of Conduit
and Conductors
Per 100 Ft. (30.5m)*
Lbs.
36.6
50.6
84.3
130.3
212.3
269.8
401.8
579.0
826.3
1098.0
1364.0
kg
(16.6)
(23.0)
(38.2)
(59.1)
(96.3)
(122.4)
(182.3)
(262.6)
(374.8)
(498.0)
(618.7)
Nominal
Inside
Diameter
Outside
Diameter
In.
mm
In.
mm
In.
1/2
(15)
(20)
1
1
1 /4
11/2
2
21/2
3
31/2
4
5
6
(25)
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
(21.3)
3/4
0.632
0.836
1.063
1.394
1.624
2.083
2.489
3.090
3.570
4.050
5.073
6.093
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(26.7)
(33.4)
(42.2)
(48.3)
(60.3)
(73.0)
(88.9)
(101.6)
(114.3)
(141.3)
(168.3)
Minimum Weight
Per 100 Ft. (30.5m) with
Couplings Attached
mm
(16.1)
(21.2)
(27.0)
(35.4)
(41.2)
(52.9)
(63.2)
(78.5)
(90.7)
(102.9)
(128.9)
(154.8)
Lbs.
kg
27.4
36.4
53.0
69.6
82.2
115.7
182.5
238.9
287.7
340.0
465.4
612.5
(12.4)
(16.5)
(24.0)
(31.6)
(37.3)
(52.5)
(82.8)
(108.4)
(130.5)
(154.2)
(211.1)
(277.8)
Weight of Conduit
and Conductors
Per 100 Ft. (30.5m)*
Lbs.
49.5
77.2
119.3
186.9
242.0
377.5
556.5
815.2
1061.0
1334.0
2028.0
2870.0
kg
(22.5)
(35.0)
(54.1)
(84.8)
(109.8)
(171.2)
(252.4)
(369.8)
(481.3)
(605.1)
(919.9)
(1301.8)
In.
mm
Feet
Meters
1/2-3/4
(15-20)
10
(3.05)
(25)
12
(3.66)
11/4-11/2
(32-40)
14
(4.27)
2-21/2
(50-65)
16
(4.88)
3-6
(80-150)
20
(6.10)
234
Reference Data
SCHEDULE 40 PVC PLASTIC PIPE
Nominal
Pipe Size
mm
(3)
1/4
(6)
3/8
(10)
1/2
(15)
3/4
(20)
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
10
12
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
In.
.405
.540
.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
Inside
Diameter
mm
(10.3)
(13.7)
(17.1)
(21.3)
(26.7)
(33.4)
(42.2)
(48.3)
(60.3)
(73.0)
(88.9)
(101.6)
(114.3)
(141.3)
(168.3)
(219.1)
(273.1)
(323.9)
In.
.269
.364
.493
.622
.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
5.047
6.065
7.981
10.020
11.938
Weight of Pipe
Per 100 Ft. (30.5m)
mm
Lbs.
(9.2)
(12.5)
(15.8)
(20.9)
(26.6)
(35.1)
(40.9)
(52.5)
(62.7)
(77.9)
(90.1)
(102.3)
(128.2)
(154.1)
(202.7)
(254.5)
(303.2)
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
11/8-7
11/4-7
11/2-6
In.2
cm2
0.027
0.045
0.068
0.126
0.202
0.302
0.419
0.551
0.693
0.889
1.293
(0.174)
(0.290)
(0.438)
(0.812)
(1.303)
(1.948)
(2.703)
(3.561)
(4.471)
(5.735)
(8.342)
3/4
240
400
730
1350
2160
3230
4480
5900
7450
9500
13800
7.2
12.7
19.2
29.6
44.9
69.6
108.2
140.0
214.9
317.1
463.9
604.1
756.0
1148.8
1613.0
2713.5
4208.9
5886.4
(3.7)
(4.9)
(7.4)
(9.9)
(14.6)
(19.7)
(23.5)
(31.5)
(49.7)
(65.1)
(79.7)
(92.7)
(127.8)
(163.7)
(247.3)
(358.9)
(469.6)
Nominal
Conduit
Size
1/2
Root Area
Lbs.
(2.1)
kg
(3.2)
(5.8)
(8.7)
(13.4)
(20.4)
(31.6)
(49.1)
(63.5)
(97.5)
(143.8)
(210.4)
(274.0)
(342.9)
(521.1)
(731.7)
(1230.8)
(1909.1)
(2670.0)
kg
4.7
8.2
10.9
16.4
21.8
32.1
43.4
51.8
69.5
109.6
143.5
175.6
204.3
281.7
360.9
545.3
791.3
1035.2
(6.8)
1
11/4
11/2
2
21/2
3
31/2
4
5
6
kN
(1.07)
(1.78)
(3.24)
(6.00)
(9.60)
(14.37)
(19.93)
(26.24)
(33.14)
(42.25)
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
Conduit Coating
.020 (.51mm)
.040 (1.01mm)
Clamp Coating
Clamp Coating
0
.020 (.51mm)
.020 (.51mm)
B2028
B2030
B2032
B2005
B2012
B2013
B2014
B2015
B2016
B2017
B2019
B2020
B2002
B2030
B2032
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115
B2002
B2030
B2032
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115
B2029
B2003
B2033
B2005
B2037
B2041
B2045
B2050
B2054
B2058
B2066
B2115
(61.38)
Nominal
Conduit
Size
3/8
1/2
3/4
1
11/4
11/2
2
235
(10)
(15)
(20)
(25)
(32)
(40)
(50)
Conduit Coating
.020 (.51mm)
.040 (1.01mm)
Clamp Coating
Clamp Coating
0
.020 (.51mm)
.020 (.51mm)
B2026
B2027
B2029
B2003
B2004
B2035
B2039
B2026
B2027
B2029
B2031
B2034
B2035
B2039
B2026
B2027
B2029
B2031
B2034
B2035
B2039
B2007
B2008
B2009
B2031
B2034
B2036
B2013
Reference Data
1
1
1
1
In.
1/8
Outside
Diameter
Weight of Pipe
Filled With Water
Per 100 Ft. (30.5m)
Reference Data
COPPER TUBING, TYPE L
Reference Data
Nominal
Tubing Size
Outside
Diameter
In.
mm
In.
1/4
(6)
3/8
(10)
1/2
(15)
5/8
(17)
3/4
(20)
1
11/4
11/2
2
1
2 /2
3
31/2
4
5
6
8
10
12
(25)
.375
.500
.625
.750
.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
10.125
12.125
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
mm
(9.5)
(12.7)
(15.9)
(19.1)
(22.2)
(28.6)
(34.9)
(41.3)
(54.0)
(66.7)
(79.4)
(92.1)
(104.8)
(130.2)
(155.6)
(206.4)
(257.2)
(308.0)
Inside
Diameter
In.
.315
.430
.545
.666
.785
1.025
1.265
1.505
1.985
2.465
2.945
3.425
3.905
4.875
5.845
7.725
9.625
11.565
mm
(8.0)
(10.9)
(13.8)
(16.9)
(19.9)
(26.0)
(32.1)
(38.2)
(50.4)
(62.6)
(74.8)
(87.0)
(99.2)
(123.8)
(148.5)
(196.2)
(244.5)
(293.8)
Weight of Tubing
Per 100 Ft. (30.5m)
Weight of Tubing
Filled With Water
Per 100 Ft. (30.5m)
Lbs.
Lbs.
12.6
19.8
28.5
36.2
45.5
65.5
88.4
114.0
175.0
248.0
333.0
429.0
538.0
761.0
1020.0
1930.0
3010.0
4040.0
kg
(5.7)
(9.0)
(12.9)
(16.4)
(20.6)
(29.7)
(40.1)
(51.7)
(79.4)
(112.5)
(151.0)
(194.6)
(244.0)
(345.2)
(462.7)
(875.4)
(1365.3)
(1832.5)
16.0
26.1
38.6
51.3
66.5
101.3
142.9
191.1
309.1
454.8
628.2
828.3
1057.1
1570.0
2182.9
3961.3
6163.4
8592.8
kg
(7.2)
(11.8)
(17.5)
(23.3)
(30.2)
(45.9)
(64.8)
(86.7)
(140.2)
(206.3)
(285.0)
(375.7)
(479.5)
(712.1)
(990.2)
(1796.8)
(2795.7)
(3897.6)
Outside
Diameter
mm
In.
1/4
(6)
3/8
(10)
1/2
(15)
5/8
(17)
3/4
(20)
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
10
12
(25)
.375
.500
.625
.750
.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
10.125
12.125
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
mm
(9.5)
(12.7)
(15.9)
(19.1)
(22.2)
(28.6)
(34.9)
(41.3)
(54.0)
(66.7)
(79.4)
(92.1)
(104.8)
(130.2)
(155.6)
(206.4)
(257.2)
(308.0)
Inside
Diameter
In.
.305
.402
.527
.652
.745
.995
1.245
1.481
1.959
2.435
2.907
3.385
3.857
4.805
5.741
7.583
9.449
11.315
mm
(7.7)
(10.2)
(13.4)
(16.6)
(18.9)
(25.3)
(31.6)
(37.6)
(49.8)
(61.8)
(73.8)
(86.0)
(98.0)
(122.0)
(145.8)
(192.6)
(240.0)
(287.4)
Weight of Tubing
Filled With Water
Per 100 Ft. (30.5m)
Lbs.
Lbs.
14.5
26.9
34.4
41.8
64.1
83.9
104.0
136.0
206.0
293.0
400.0
512.0
651.0
967.0
1390.0
2590.0
4030.0
5780.0
Weight of Tubing
Per 100 Ft. (30.5m)
236
kg
(6.6)
(12.2)
(15.6)
(19.0)
(29.1)
(38.1)
(47.2)
(61.7)
(93.4)
(132.9)
(181.4)
(232.2)
(295.3)
(438.6)
(630.5)
(1174.8)
(1828.0)
(2621.8)
17.7
32.4
43.9
56.3
83.0
117.6
156.8
210.7
336.6
494.8
687.7
902.0
1157.4
1752.9
2511.9
4547.3
7069.2
10138.0
kg
(8.0)
(14.7)
(19.9)
(25.5)
(37.6)
(53.3)
(71.1)
(95.6)
(152.7)
(224.5)
(311.9)
(409.2)
(525.0)
(795.1)
(1139.4)
(2062.6)
(3206.5)
(4598.5)
Reference Data
STANDARD WEIGHT SCHEDULE 40 STEEL PIPE
Nominal
Pipe Size
Outside
Diameter
mm
(10)
(15)
(20)
(25)
(32)
(40)
(50)
(65)
(80)
(90)
(100)
(125)
(150)
(200)
(250)
(300)
(350)
(400)
(450)
(500)
(600)
In.
mm
(17.1)
.675
1/2
(21.3)
.840
3/4
(26.7)
1.050
(33.4)
1
1.315
(42.2)
11/4
1.660
(48.3)
11/2
1.900
(60.3)
2
2.375
(73.0)
21/2
2.875
(88.9)
3
3.500
31/2
4.000 (101.9)
(114.3)
4
4.500
5
5.563 (141.3)
6
6.625 (168.3)
8
8.625 (219.1)
10
10.750 (273.1)
12
12.750 (323.9)
14
14.000 (355.6)
16
16.000 (406.4)
18
18.000 (457.2)
20
20.000 (508.0)
24
24.000 (609.6)
Dimensions taken from ASTM A 53-82.
1
1
1
1
In.
mm
Lbs.
kg
Lbs.
.493
.622
.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
5.047
6.065
7.981
10.020
12.000
13.250
15.250
17.250
19.250
23.250
(12.5)
(15.8)
(20.9)
(26.6)
(35.1)
(40.9)
(52.5)
(62.7)
(77.9)
(90.1)
(102.3)
(128.2)
(154.1)
(202.7)
(254.5)
(304.8)
(336.6)
(387.4)
(438.2)
(489.0)
(590.6)
57.0
85.0
113.0
168.0
227.0
272.0
365.0
579.0
758.0
911.0
1079.0
1462.0
1897.0
2855.0
4048.0
4956.0
5457.0
6258.0
7059.0
7860.0
9462.0
(25.9)
(38.6)
(51.3)
(76.2)
(103.0)
(123.4)
(165.6)
(262.6)
(343.8)
(413.2)
(489.4)
(663.2)
(860.5)
(1295.0)
(1836.1)
(2248.0)
(2475.3)
(2838.6)
(3201.9)
(3565.2)
(4291.9)
65.3
98.2
136.1
205.5
291.8
360.2
510.4
786.5
1078.4
1339.5
1630.7
2329.1
3149.1
5023.2
7465.6
9857.7
11433.1
14174.3
17187.9
20473.7
27862.5
kg
Reference Data
In.
3/8
Weight of Pipe
Filled With Water
Per 100 Ft. (30.5mm)
Nominal Weight
Per 100 Ft. (30.5mm)
Plain End
Inside
Diameter
(29.6)
(44.5)
(61.7)
(93.2)
(132.4)
(163.4)
(231.5)
(356.8)
(489.2)
(607.6)
(739.7)
(1056.4)
(1428.4)
(2278.5)
(3386.3)
(4471.4)
(5185.9)
(6429.4)
(7796.3)
(9286.7)
(12638.2)
21/2 (65mm)
or less
3 (80mm)
31/2 (90mm)
4 (100mm)
5 (125mm)
6 (150mm)
8 (200mm)
10 (250mm)
1-6
2 x 11/2 x 3/16
2 x 11/2 x 3/16
3 x 2 x 3/16
3 x 2 x 1/4
(0.46m)
B24SH
B24SH
B24SH
B22SH
B22SH
B12SH
B11SH
B11SH
2-0
2 x 11/2 x 3/16
2 x 11/2 x 3/16
2 x 11/2 x 3/16
3 x 2 x 3/16
3 x 2 x 1/4
(0.61m)
B24SH
B22SH
B22SH
2-6
2 x 11/2 x 3/16
2 x 11/2 x 3/16
2 x 11/2 x 3/16
B22SH
B12SH
B11SH
B11SH
3 x 2 x 3/16
3 x 2 x 1/4
3 x 2 x 1/4
B11SH
B11SH
(0.76m)
B22SH
B22SH
B22SH
B12SH
B12SH
B11SH
3-0
2 x 11/2 x 3/16
2 x 11/2 x 3/16
3 x 2 x 3/16
3 x 2 x 3/16
(0.91m)
B22SH
B22SH
B12SH
B12SH
B11SH
B11SH
B12SHA
B12SHA
4-0
3 x 2 x 3/16
3 x 2 x 3/16
3 x 2 x 1/4
4 x 3 x 5/16
(1.22m)
B12SH
B12SH
B12SH
B11SH
B11SH
B11SH
B12SHA
B12SHA
5-0
3 x 2 x 3/16
3 x 2 x 3/16
3 x 2 x 1/4
4 x 3 x 5/16
5 x 31/2 x 5/16
(1.52m)
B12SH
B12SH
B11SH
B11SH
B11SH
B12SHA
B12SHA
B11SHA
6-0
3 x 2 x 3/16
3 x 2 x 3/16
3 x 2 x 1/4
4 x 3 x 5/16
4 x 3 x 5/16
5 x 31/2 x 5/16
(1.83m)
B12SH
B11SH
B11SH
B11SH
B12SHA
B12SHA
B12SHA
B11SHA
7-0
3 x 2 x 3/16
3 x 2 x 3/16
3 x 2 x 1/4
3 x 2 x 1/4
4 x 3 x 5/16
5 x 31/2 x 5/16
6 x 4 x 1/4
B11SH
B12SHA
(2.13m)
B11SH
B11SH
B11SH
8-0
3 x 2 x 3/16
3 x 2 x 1/4
3 x 2 x 1/4
(2.44m)
B11SH
B11SH
B11SH
9-0
3 x 2 x 3/16
3 x 2 x 1/4
B12SHA
B12SHA
B11SHA
2-B12SHA
4 x 3 x 5/16
5 x 31/2 x 5/16
6 x 4 x 1/4
B12SHA
B11SHA
2-B12SHA
4 x 3 x 5/16
5 x 31/2 x 5/16
6 x 4 x 3/8
(2.74m)
B11SH
B11SH
B12SHA
B12SHA
B12SHA
B12SHA
B11SHA
2-B11SHA
10-0
3 x 2 x 1/4
3 x 2 x 1/4
4 x 3 x 5/16
5 x 31/2 x 5/16
6 x 4 x 1/4
6 x 4 x 3/8
(3.05m)
B11SH
B11SH
B12SHA
B12SHA
B12SHA
B11SHA
2-B12SHA
2-B11SHA
REFERENCE: Table 3-14.1.6 standard for the installation of Sprinkler Systems, NFPA No. 13-1985,
published by National Fire Protection Association.
237
Tolco
Fig#
Cooper B-Line
Pt. #
Tolco
Fig#
Cooper B-Line
Pt. #
Tolco
Fig#
Cooper B-Line
Pt. #
BC-14-5/8 . . . . . . . . . . . . . . . . . . . B321-4
BC-14-3/4 . . . . . . . . . . . . . . . . . . . B321-5
BC-16 . . . . . . . . . . . . . . . . . . . . . . . . . B314
BC-17 . . . . . . . . . . . . . . . . . . . . . B441-22
BC-18-3/8 . . . . . . . . . . . . . . . . . B212-3/8
BR-22-12 . . . . . . . . . . . . . . . . . B409-12
BR-22-18 . . . . . . . . . . . . . . . . . B409-18
BR-22-24 . . . . . . . . . . . . . . . . . B409-25
C SAFETY END CAP . . . . . . B852
C-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B54
2 STR 2 . . . . . . . . . . . . . . . . . . B2400-2
2 STR 21/2 . . . . . . . . . . . . B2400-21/2
2 STR 3 . . . . . . . . . . . . . . . . . . B2400-3
2 STR 31/2 . . . . . . . . . . . . B2400-31/2
2 STR 4 . . . . . . . . . . . . . . . . . . B2400-4
BC-18-1/2 . . . . . . . . . . . . . . . . . B212-1/2
BC-19 . . . . . . . . . . . . . . . . . . . . . . . . . B427
BC-20 . . . . . . . . . . . . . . . . . . . . . . . . . B355
BC-21 . . . . . . . . . . . . . . . . . . . . . . . . . B211
BC-23 . . . . . . . . . . . . . . . . . . . . . . . . . B614
2 STR 5 . . . . . . . . . . . . . . . . . . B2400-5
2 STR 6 . . . . . . . . . . . . . . . . . . B2400-6
2 STR 8 . . . . . . . . . . . . . . . . . . B2400-8
65XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3367
69R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . SC228
98B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
310 . . . . . . . . . . . . . . . . . . . . . . . . . . . B2501
BR-10-8R . . . . . . . . . . . . . . . B185SHR
BR-10-10L . . . . . . . . . . . . . . . B186SHL
BR-10-10R . . . . . . . . . . . . . B186SHR
BR-10-12L . . . . . . . . . . . . . . . B178SHL
BR-10-12R . . . . . . . . . . . . . B178SHR
310N 1/4
310N 3/8
310N 1/2
310N 5/8
310N 3/4
N2501-1/4
N2501-3/8
. . . . . . . . . . . . . . . . . N2501-1/2
. . . . . . . . . . . . . . . . . N2501-5/8
. . . . . . . . . . . . . . . . . N2501-3/4
BR-10-18L . . . . . . . . . . . . . . . B181SHL
BR-10-18R . . . . . . . . . . . . . B181SHR
BR-10-20L . . . . . . . . . . . . . . . B182SHL
BR-10-20R . . . . . . . . . . . . . B182SHR
BR-11-81/2 . . . . . . . . . . . . . . . . . . . . B187
BR-11-101/2 . . . . . . . . . . . . . . . . . . . B541
BR-11-121/2 . . . . . . . . . . . . . . . B289-12
BR-11-141/2 . . . . . . . . . . . . . . . B289-14
BR-11-22 . . . . . . . . . . . . . . . . . . . . . . B292
BR-12 . . . . . . . . . . . . . . . . . . . . . . . . . B290
915 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B634
915D . . . . . . . . . . . . . . . . . . . . . . . . . . B635
A SAFETY END CAP . . . . . . . B822
A-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B22
A-12 End Cap . . . . . . . . . . . . . . . . B205
BR-13 . . . . . . . . . . . . . . . . . . . . . . . . . B194
BR-14 . . . . . . . . . . . . . . . . . . . . . . . . . B370
BR-15-18 . . . . . . . . . . . . . . . . . B196-18
BR-15-24 . . . . . . . . . . . . . . . . . B196-24
BR-16-6 . . . . . . . . . . . . . . . . . . . B198A-6
BR-16-12
BR-17-12
BR-17-18
BR-17-24
BR-17-30
B198A-12
B297-12
. . . . . . . . . . . . . . . . . B297-18
. . . . . . . . . . . . . . . . . B297-24
. . . . . . . . . . . . . . . . . B297-30
BR-17-36 . . . . . . . . . . . . . . . . . B297-36
BR-18-6 . . . . . . . . . . . . . . . . . . . . B293-6
BR-18-12 . . . . . . . . . . . . . . . . . B293-12
BR-19-18 . . . . . . . . . . . . . . . . B293A-18
BR-18-24 . . . . . . . . . . . . . . . . . B293-24
BC-13-1/2 . . . . . . . . . . . . . . . . . . . . . B307
BC-13-5/8 . . . . . . . . . . . . . . . . . . . . . B309
BC-13-3/4 . . . . . . . . . . . . . . . . . . . B321-5
BC-14-1/4 . . . . . . . . . . . . . . . . . . . . . B303
BC-14-5/16 . . . . . . . . . . . . . . . . . . . . B304
BR-19-6 . . . . . . . . . . . . . . . . . . . B293A-6
BR-18-12 . . . . . . . . . . . . . . . . . B293-12
BR-19-18 . . . . . . . . . . . . . . . . B293A-18
BR-19-24 . . . . . . . . . . . . . . . . B293A-24
BR-20 . . . . . . . . . . . . . . . . . . . . . . . . . B439
BC-14-3/8
BC-14-1/2
BR-21 . . . . . . . . . . . . . . . . . . . . . . . . . B356
BR-22-6 . . . . . . . . . . . . . . . . . . . . B409-6
.................
.................
...................
...................
B321-1
B321-2
................
.................
238
BVT125
BVT137
. . . . . . . . . . BVT150
. . . . . . . . . . BVT162
. . . . . . . . . . BVT175
..........
..........
Cooper B-Line
Pt. #
Tolco
Fig#
Cooper B-Line
Pt. #
Tolco
Fig#
Cooper B-Line
Pt. #
EMTC-3/4 . . . . . . . . . . . . . . . . . . . . B2002
EMTC-1 . . . . . . . . . . . . . . . . . . . . . B2003
EMTC-11/4 . . . . . . . . . . . . . . . . . . B2004
EMTC-11/2 . . . . . . . . . . . . . . . . . . B2005
EMTC-2 . . . . . . . . . . . . . . . . . . . . . B2006
L-23 U . . . . . . . . . . . . . . . . . . . . . . . . . B844
L-24 L . . . . . . . . . . . . . . . . . . . . . . . . B503L
L-24 R . . . . . . . . . . . . . . . . . . . . . . . B503R
L-25 L . . . . . . . . . . . . . . . . . . . . . . . . B503L
L-25 . . . . . . . . . . . . . . . . . . . . . . . . . B503R
OD 3/4 . . . . . . . . . . . . . . . . . . . . . . . . B2027
OD 7/8 . . . . . . . . . . . . . . . . . . . . . . . . B2028
OD 1 . . . . . . . . . . . . . . . . . . . . . . . . . B2029
OD 11/8 . . . . . . . . . . . . . . . . . . . . . . B2030
OD 11/4 . . . . . . . . . . . . . . . . . . . . . . B2031
F-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . B129
F-10 . . . . . . . . . . . . . . . . . . . . . . . . . B200D
F-11 . . . . . . . . . . . . . . . . . . . . . . . . . . B201D
F-12-1/2 . . . . . . . . . . . . . . . . . . . . . B202-D
F-12-5/8 . . . . . . . . . . . . . . . . . . . B202-1D
L-26 L . . . . . . . . . . . . . . . . . . . . . . . . B236L
L-26 R . . . . . . . . . . . . . . . . . . . . . . . B236R
L-27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B357
L-28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B237
L-29 . . . . . . . . . . . . . . . . . . . . . . B240-378
OD 13/8
OD 11/2
OD 15/8
OD 13/4
OD 17/8
F-12-3/4 . . . . . . . . . . . . . . . . . . . B202-2D
F-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . B200
F-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . B201
F-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . B202
F-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . B202
L-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B558
L-31 L . . . . . . . . . . . . . . . . . . . . . . . . B235L
L-31 R . . . . . . . . . . . . . . . . . . . . . . . B235R
L-32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B126
L-33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B127
OD 2 . . . . . . . . . . . . . . . . . . . . . . . . . B2037
OD 21/8 . . . . . . . . . . . . . . . . . . . . . . B2038
OD 21/4 . . . . . . . . . . . . . . . . . . . . . . B2039
OD 23/8 . . . . . . . . . . . . . . . . . . . . . . B2013
OD 21/2 . . . . . . . . . . . . . . . . . . . . . . B2041
B202-1
B202-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
. . . . . . . . . . . . . . . . . . . . . . . . . . . B141
. . . . . . . . . . . . . . . . . . . . . . . . . . . B342
L-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B118
L-35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B239
L-36 L . . . . . . . . . . . . . . . . . . . . . . . . B234L
L-36 R . . . . . . . . . . . . . . . . . . . . . . . B234R
L-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B112
OD 25/8 . . . . . . . . . . . . . . . . . . . . . . B2042
OD 23/4 . . . . . . . . . . . . . . . . . . . . . . B2043
OD 27/8 . . . . . . . . . . . . . . . . . . . . . . B2014
OD 3 . . . . . . . . . . . . . . . . . . . . . . . . . B2045
OD 31/8 . . . . . . . . . . . . . . . . . . . . . . B2046
B340
B341
. . . . . . . . . . . . . . . . . . . . . . . . . . . B504
. . . . . . . . . . . . . . . . . . . . . . . . . . . B133
. . . . . . . . . . . . . . . . . . . . . . . . . . . B138
L-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B113
L-39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B461
L-40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B533
L-41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B485
L-42 L . . . . . . . . . . . . . . . . . . . . . . . . B134L
OD 31/4
OD 33/8
OD 31/2
OD 35/8
OD 33/4
B2032
B2004
. . . . . . . . . . . . . . . . . . . . . . B2011
. . . . . . . . . . . . . . . . . . . . . . B2005
. . . . . . . . . . . . . . . . . . . . . . B2036
......................
......................
.........................
F-22
F-23
F-24
F-25
F-26
...........................
F-27
F-28
F-29
F-30
F-31
...........................
B139
. . . . . . . . . . . . . . . . . . . . . . . . . . . B132
. . . . . . . . . . . . . . . . . . . . . . . . . . . B339
. . . . . . . . . . . . . . . . . . . . . . . . . . . B337
. . . . . . . . . . . . . . . . . . . . . . . . . . . B136
L-42 R . . . . . . . . . . . . . . . . . . . . . . . B134R
L-43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B125
L-44-12 . . . . . . . . . . . . . . . . . . . . B261-12
L-44-16 . . . . . . . . . . . . . . . . . . . . B261-16
L-44-18 . . . . . . . . . . . . . . . . . . . . B261-18
OD 37/8 . . . . . . . . . . . . . . . . . . . . . . B2052
OD 4 . . . . . . . . . . . . . . . . . . . . . . . . . B2016
OD 51/8 . . . . . . . . . . . . . . . . . . . . . . B2062
OD 51/4 . . . . . . . . . . . . . . . . . . . . . . B2063
OD 53/8 . . . . . . . . . . . . . . . . . . . . . . B2064
F-32
F-33
F-34
F-35
F-36
...........................
B532
. . . . . . . . . . . . . . . . . . . . . . . . . . . B142
. . . . . . . . . . . . . . . . . . . . . . . . . . . B556
. . . . . . . . . . . . . . . . . . . . . . . . . . . B135
. . . . . . . . . . . . . . . . . . . . . . . . . . . B140
L-45-30
L-45-45
L-45-60
L-46-30
L-46-45
........................
B162
B154
. . . . . . . . . . . . . . . . . . . . . . . . B150
. . . . . . . . . . . . . . . . . . . . . . . . B246
. . . . . . . . . . . . . . . . . . . . . . . . B248
OD 51/2 . . . . . . . . . . . . . . . . . . . . . . B2019
OD 55/8 . . . . . . . . . . . . . . . . . . . . . . B2066
OD 53/4 . . . . . . . . . . . . . . . . . . . . . . B2067
OD 57/8 . . . . . . . . . . . . . . . . . . . . . . B2068
OD 6 . . . . . . . . . . . . . . . . . . . . . . . . . B2069
F-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . B143
F-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . B334
HEX HEAD BOLTS . . . . . . . . HHCS
L-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B231
L-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B101
L-46-60
L-47-30
L-47-45
L-47-60
L-48-30
........................
B250
N/C
. . . . . . . . . . . . . . . . . . . . . . . . B155
. . . . . . . . . . . . . . . . . . . . . . . . B159
. . . . . . . . . . . . . . . . . . . . . . . . . N/C
OD 61/8
OD 61/4
OD 63/8
OD 61/2
OD 65/8
L-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B230
L-12-3 . . . . . . . . . . . . . . . . . . . . . . . . . B359
L-12-31/2 . . . . . . . . . . . . . . . . . . . . . . B360
L-12-4 . . . . . . . . . . . . . . . . . . . . . . . . . B361
L-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B372
L-48-45
L-48-60
NUT 1/4
NUT 3/8
NUT 1/2
........................
B368
. . . . . . . . . . . . . . . . . . . . . . . . B366
. . . . . . . . . . . . . . . . . . . N224WO
. . . . . . . . . . . . . . . . . . . N228WO
. . . . . . . . . . . . . . . . . . . N225WO
OD 63/4 . . . . . . . . . . . . . . . . . . . . . . B2115
OD 67/8 . . . . . . . . . . . . . . . . . . . . . . B2116
OD 7 . . . . . . . . . . . . . . . . . . . . . . . . . B2117
OD 71/8 . . . . . . . . . . . . . . . . . . . . . . B2118
OD 71/4 . . . . . . . . . . . . . . . . . . . . . . B2119
.........................
...........................
........................
.........................
B2047
B2048
. . . . . . . . . . . . . . . . . . . . . . B2015
. . . . . . . . . . . . . . . . . . . . . . B2050
. . . . . . . . . . . . . . . . . . . . . . B2051
......................
......................
B2110
B2111
. . . . . . . . . . . . . . . . . . . . . . B2112
. . . . . . . . . . . . . . . . . . . . . . B2113
. . . . . . . . . . . . . . . . . . . . . . B2020
......................
......................
L-16
L-17
L-18
L-19
L-20
B496-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . B496
. . . . . . . . . . . . . . . . . . . . . . . . . . . . B102
. . . . . . . . . . . . . . . . . . . . . . . . . . . . B232
. . . . . . . . . . . . . . . . . . . . . . . . . . . . B103
OD 73/8
OD 71/2
OD 75/8
OD 73/4
OD 77/8
L-21
L-22
B371-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . B104
OD 1/2
OD 5/8
OD 8 . . . . . . . . . . . . . . . . . . . . . . . . . B2125
OD 81/8 . . . . . . . . . . . . . . . . . . . . . . B2126
.........................
.........................
........................
........................
239
B2025
B2026
B2120
B2121
. . . . . . . . . . . . . . . . . . . . . . B2021
. . . . . . . . . . . . . . . . . . . . . . B2123
. . . . . . . . . . . . . . . . . . . . . . B2124
......................
......................
F-16
F-17
F-18
F-20
F-21
OD 81/4
OD 83/8
OD 81/2
OD 85/8
OD 83/4
Cooper B-Line
Pt. #
Tolco
Fig#
Cooper B-Line
Pt. #
Tolco
Fig#
Cooper B-Line
Pt. #
OD 87/8 . . . . . . . . . . . . . . . . . . . . . . . . . N/C
OD 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
OD 91/2 . . . . . . . . . . . . . . . . . . . . . . . . . N/C
OD 95/8 . . . . . . . . . . . . . . . . . . . . . . . . . N/C
OD 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
RIGID 4
RIGID 5
RIGID 6
RIGID 8
ROL-10
U-12 . . . . . . . . . . . . . . . . . . . . . . . B116-12
U-13-71/4 . . . . . . . . . . . . . . . . . . . B333-1
U-13-81/2 . . . . . . . . . . . . . . . . . . . B333-2
U-13-103/8 . . . . . . . . . . . . . . . . . . B333-3
U-16 . . . . . . . . . . . . . . . . . . . . . B107-22A
OD 103/4 . . . . . . . . . . . . . . . . . . . . . B2130
OD 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
OD 115/8 . . . . . . . . . . . . . . . . . . . . . . . . N/C
OD 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
OD 123/4 . . . . . . . . . . . . . . . . . . . . . B2132
ROL-11 . . . . . . . . . . . . . . . . . . . . . . . . B376
ROL-12* . . . . . . . . . . . . . . . . . . . . . . B218
ROL-13 . . . . . . . . . . . . . . . B219 Series
ROL-14 . . . . . . . . . . . . . . . . . . . . . . . B379
ROL-15 . . . . . . . . . . . . . . . . . . . . . . . B479
U-18
U-22
U-24
U-26
U-29
.........................
OD CP 3/8
OD CP 1/2
OD CP 5/8
OD CP 3/4
OD CP 7/8
U-30
U-31
U-32
U-33
U-34
B400-3
B425
. . . . . . . . . . . . . . . . . . . . . . . . . . . B519
. . . . . . . . . . . . . . . . . . . . . . . . . . . B581
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
N275
N278
. . . . . . . . . . . . . . . . . . . . . N524
. . . . . . . . . . . . . . . . . . . . . N528
. . . . . . . . . . . . . . . . . . . . . N525
UNIV-1/2 . . . . . . . . . . . . . . . . . . . . . B2208
UNIV-3/4 . . . . . . . . . . . . . . . . . . . . . B2209
UNIV-1 . . . . . . . . . . . . . . . . . . . . . . . B2210
UNIV-11/4 . . . . . . . . . . . . . . . . . . . . B2211
UNIV-11/2 . . . . . . . . . . . . . . . . . . . . B2212
N555
N575
. . . . . . . . . . . . . . . . . . . . . N724
. . . . . . . . . . . . . . . . . . . . . N728
. . . . . . . . . . . . . . . . . . . . . N725
UNIV-2
W-10 L
W-10 R
W-11 L
W-11 R
N755
N775
. . . . . . . . . . . . . . . . . . . SN224
. . . . . . . . . . . . . . . . . . . SN228
. . . . . . . . . . . . . . . . . . . SN225
W-12
W-13
W-14
W-16
W-17
B2127
B2128
. . . . . . . . . . . . . . . . . . . . . . B2129
. . . . . . . . . . . . . . . . . . . . . . B2022
. . . . . . . . . . . . . . . . . . . . . . . . . N/C
......................
......................
B2024DCU
B2025DCU
. . . . . . . . . . . . . B2026DCU
. . . . . . . . . . . . . B2027DCU
. . . . . . . . . . . . . B2028DCU
.............
.............
B2020
B2022
. . . . . . . . . . . . . . . . . . . . . . B2130
. . . . . . . . . . . . . . . . . . . . . . B2132
. . . . . . . . . . . . . . . . . . . . . . . B377
......................
......................
B398-1
B169, B170
. . . . . . . . . . . . . . . . . . . B167, B172
. . . . . . . . . . . . . . . . . . . . . . . . . . . B173
. . . . . . . . . . . . . . . . . . . . . . . . . B400-1
...................
.........................
...........................
OD CP 11/8
OD CP 13/8
OD CP 15/8
OD CP 21/8
OD CP 25/8
B2030DCU
B2032DCU
. . . . . . . . . . . . B2011DCU
. . . . . . . . . . . B2038DCU
. . . . . . . . . . . B2042DCU
SPRA 3/4
SPRA 7/8
SPRC 1/4
SPRC 3/8
SPRC 1/2
......................
OD CP 31/8
OD CP 35/8
OD CP 41/8
OD CP 51/8
OD CP 61/8
B2046DCU
. . . . . . . . . . . B2050DCU
. . . . . . . . . . . B2054DCU
. . . . . . . . . . . B2062DCU
. . . . . . . . . . . . B2110DCU
SPRC 5/8
SPRC 3/4
SPRD 1/4
SPRD 3/8
SPRD 1/2
.....................
P-09 . . . . . . . . . . . . . . . . . . . . . . . . B280FL
P-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . B279
P-10 F . . . . . . . . . . . . . . . . . . . . . . B279FL
P-10 SQ . . . . . . . . . . . . . . . . . . B279SQ
P-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . B280
SPRD 5/8
SPRD 3/4
SPRM 1/4
SPRM 3/8
SPRM 1/2
.....................
P-11 F . . . . . . . . . . . . . . . . . . . . . . B280FL
P-11 SQ . . . . . . . . . . . . . . . . . . . B280SQ
P-12 . . . . . . . . . . . . . . . . . . . . . . . . . B281A
P-12 F . . . . . . . . . . . . . . . . . . . . B281AFL
P-12 SQ . . . . . . . . . . . . . . . . . B281ASQ
W-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . B273
W-19 . . . . . . . . . . . . . . . . . . . . . . . . . . . B122
W-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . B124
W-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . B123
W-22 L . . . . . . . . . . . . . . . . . . . . . . . B274L
P-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . B281
P-13 F . . . . . . . . . . . . . . . . . . . . . . B281FL
P-13 SQ . . . . . . . . . . . . . . . . . . B281SQ
P-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . B585
P-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . B278
W-22 R . . . . . . . . . . . . . . . . . . . . . . B274R
W-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . B276
W-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . B495
W-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . B362
Z-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . B105
Z-15
Z-17
Z-25
RIGID 1 . . . . . . . . . . . . . . . . . . . . . . B2012
RIGID 11/4 . . . . . . . . . . . . . . . . . . . B2013
SWMF 5/8
SWMF 3/4
...........
...........
...........
......................
.....................
.....................
B446-5/8
. . . . . . . . . . . . . . . . . B446-3/4
.................
240
B2213
B267L
. . . . . . . . . . . . . . . . . . . . . . B267R
. . . . . . . . . . . . . . . . . . . . . . . B269L
. . . . . . . . . . . . . . . . . . . . . . B269R
.......................
.......................
B119
B120
. . . . . . . . . . . . . . . . . . . . . . . . . . . B121
. . . . . . . . . . . . . . . . . . . . . . . . . . . B271
. . . . . . . . . . . . . . . . . . . . . . . . . . . B272
...........................
...........................
B108
B586
. . . . . . . . . . . . . . . . . . . . . . . . . . . B515
...........................
...........................
Index
B22A3 . . . . . . . . . . . . . 21
B22A4 . . . . . . . . . . . . . 21
B22AAL . . . . . . . . . . 177
B22AD3 . . . . . . . . . . . 21
B22AL . . . . . . . . . . . . 177
B24KO6 . . . . . . . . . . . 41
B24KO6AL . . . . . . . 178
B24M . . . . . . . . . . . . . . 42
B24S . . . . . . . . . . . . . . 40
B24S58 . . . . . . . . . . . . 42
B42S . . . . . . . . . . . . . . 40
B42S58 . . . . . . . . . . . . 42
B42SH . . . . . . . . . . . . . 40
B42SHSS4 . . . . . . . 180
B42SS4 . . . . . . . . . . 180
98B . . . . . . . . . . . . . . . . 57
ACPD Series . . . . . 220
ACPW Series . . . . . 220
ACS Series . . . . . . . 221
ADH Series . . . . . . . 219
B22B . . . . . . . . . . . . . .
B22B3 . . . . . . . . . . . . .
B22C . . . . . . . . . . . . . .
B22C3 . . . . . . . . . . . . .
B22D . . . . . . . . . . . . . .
21
21
21
21
21
B24SH . . . . . . . . . . . . . 40
B24SHAL . . . . . . . . . 178
B24SHSS4 . . . . . . . 180
B24SHSS6 . . . . . . . 180
B24SS4 . . . . . . . . . . 180
B44M . . . . . . . . . . . . . . 42
B52 . . . . . . . . . . . . . 32,33
B52A . . . . . . . . . . . 32,33
B52B3 . . . . . . . . . . . . . 32
B52B4 . . . . . . . . . . . . . 32
AHHK-1/4 . . . . . . . .
AHHK-3/8 . . . . . . . .
APC Series . . . . . . .
ARC Series . . . . . . .
ARS Series . . . . . . .
227
227
220
219
219
B22D3 . . . . . . . . . . . . . 21
B22E . . . . . . . . . . . . . . 21
B22E3 . . . . . . . . . . . . . 21
B22H17/8 . . . . . . . . . . 40
B22H17/8AL . . . . . . 178
B24SS6 . . . . . . . . . . 180
B26 . . . . . . . . . . . . . 26,27
B26A . . . . . . . . . . . 26,27
B26B . . . . . . . . . . . . . . 26
B26C . . . . . . . . . . . . . . 26
B52H17/8 . . . . . . . . . . 40
B52H25 . . . . . . . . . . . . 42
B52-I Series . . . . . . 216
B52-IFS . . . . . . . . . . 218
B52KO6 . . . . . . . . . . . 41
B22H17/8SS4 . . . . . 180
B22H25 . . . . . . . . . . . . 42
B22-I Series . . . . . . 214
B22-IFS . . . . . . . . . . 218
B22KO6 . . . . . . . . . . . 41
B26H17/8 . . . . . . . . . .
B26H25 . . . . . . . . . . . .
B26KO6 . . . . . . . . . . .
B26S . . . . . . . . . . . . . .
B26S58 . . . . . . . . . . . .
40
42
41
40
42
B52M . . . . . . . . . . . . . . 42
B52S . . . . . . . . . . . . . . 40
B52S58 . . . . . . . . . . . . 42
B52SH . . . . . . . . . . . . . 40
B54 . . . . . . . . . . . . . 34,35
AWS-OH . . . . . . . . . 221
AWS-PH . . . . . . . . . . 221
B11 . . . . . . . . . . . . . 16,17
B11A . . . . . . . . . . . 16,17
B11AL . . . . . . . . . . . . 177
B22KO6AL . . . . . . . 178
B22LPL . . . . . . . . . . . . 21
B22M . . . . . . . . . . . . . . 42
B22PL . . . . . . . . . . . . . 21
B22S . . . . . . . . . . . . . . 40
B26SH . . . . . . . . . . . . . 40
B32 . . . . . . . . . . . . . 28,29
B32A . . . . . . . . . . . 28,29
B32B . . . . . . . . . . . . . . 28
B32C . . . . . . . . . . . . . . 28
B54A . . . . . . . . . . . 34,35
B54AAL . . . . . . . . . . 177
B54AL . . . . . . . . . . . . 177
B54B3 . . . . . . . . . . . . . 34
B54B4 . . . . . . . . . . . . . 34
B11B . . . . . . . . . . . . . .
B11H17/8 . . . . . . . . . . .
B11KO6 . . . . . . . . . . .
B11S . . . . . . . . . . . . . .
B11S58 . . . . . . . . . . . .
17
40
41
40
42
B22S58 . . . . . . . . . . . . 42
B22SH . . . . . . . . . . . . . 40
B22SHA . . . . . . . . . . . 41
B22SHAL . . . . . . . . . 178
B22SHSS4 . . . . . . . 180
B32H17/8 . . . . . . . . . . 40
B32H17/8SS4 . . . . . 180
B32H25 . . . . . . . . . . . . 42
B32-I Series . . . . . . 215
B32-IFS . . . . . . . . . . 218
B54H17/8 . . . . . . . . . . 40
B54H17/8AL . . . . . . 178
B54H17/8SS4 . . . . . 180
B54H17/8SS6 . . . . . 180
B54H25 . . . . . . . . . . . . 42
B11SH . . . . . . . . . . . . . 40
B12 . . . . . . . . . . . . . 18,19
B12A . . . . . . . . . . . 18,19
B12AL . . . . . . . . . . . . 177
B12B . . . . . . . . . . . . . . 18
B22SHSS6 . . . . . . . 180
B22SS4 . . . . . . . . . . 180
B22SS6 . . . . . . . . . . 180
B22TH . . . . . . 38,39,41
B22X . . . . . . . . . . . 20-23
B32KO6 . . . . . . . . . . .
B32M . . . . . . . . . . . . . .
B32S . . . . . . . . . . . . . .
B32S58 . . . . . . . . . . . .
B32SH . . . . . . . . . . . . .
41
42
40
42
40
B54KO6 . . . . . . . . . . . 41
B54KO6AL . . . . . . . 178
B54M . . . . . . . . . . . . . . 42
B54S . . . . . . . . . . . . . . 40
B54S58 . . . . . . . . . . . . 42
B12H17/8 . . . . . . . . . . 40
B12H17/8AL . . . . . . 178
B12KO6 . . . . . . . . . . . 41
B12KO6AL . . . . . . . 178
B12S . . . . . . . . . . . . . . 40
B24 . . . . . . . . . . . . . 24,25
B24A . . . . . . . . . . . 24,25
B24AL . . . . . . . . . . . . 177
B24B . . . . . . . . . . . . . . 24
B24C . . . . . . . . . . . . . . 24
B32SHSS4 . . . . . . . 180
B32SS4 . . . . . . . . . . 180
B42 . . . . . . . . . . . . . 30,31
B42A . . . . . . . . . . . 30,31
B42B . . . . . . . . . . . . . . 30
B54SH . . . . . . . . . . . . . 40
B54SHAL . . . . . . . . . 178
B54SHSS4 . . . . . . . 180
B54SHSS6 . . . . . . . 180
B54SS4 . . . . . . . . . . 180
B12S58 . . . . . . . . . . . . 42
B12SH . . . . . . . . . . . . . 40
B12SHAL . . . . . . . . . 178
B22 . . . . . . . . . . . . 20-23
B22A . . . . . . . . 20,22,23
B24H17/8 . . . . . . . . . . 40
B24H17/8AL . . . . . . 178
B24H17/8SS4 . . . . . 180
B24H17/8SS6 . . . . . 180
B24H25 . . . . . . . . . . . . 42
B42H17/8 . . . . . . . . . . 40
B42H17/8SS4 . . . . . 180
B42H25 . . . . . . . . . . . . 42
B42KO6 . . . . . . . . . . . 41
B42M . . . . . . . . . . . . . . 42
B54SS6 . . . . . . . . . . 180
B56 . . . . . . . . . . . . . 36,37
B56A . . . . . . . . . . . 36,37
B56B3 . . . . . . . . . . . . . 36
B56B4 . . . . . . . . . . . . . 36
241
Index
65XT-3/8 . . . . . . . . . . 114
69 . . . . . . . . . . . . . . . . 115
69R . . . . . . . . . . . . . . . 115
75 . . . . . . . . . . . . . . . . . 55
98 . . . . . . . . . . . . . . . . . 57
Index
Index
B56H17/8 . . . . . . . . . .
B56H25 . . . . . . . . . . . .
B56KO6 . . . . . . . . . . .
B56S . . . . . . . . . . . . . .
B56S58 . . . . . . . . . . . .
101
101
101
101
101
B202-1 . . . . . . . . . . . .
B202-1D . . . . . . . . . . .
B202-2 . . . . . . . . . . . .
B202-2D . . . . . . . . . . .
B202D . . . . . . . . . . . . .
101
101
101
101
101
B203
B204
B205
B206
B210
101
101
101
101
101
B210A . . . . . . . . . . . . 116
B211 . . . . . . . . . . . . . 122
B212-1/4 . . . . . . . . . . 122
B212-3/8 . . . . . . . . . . 122
B213 . . . . . . . . . . . . . 122
101
101
101
101
101
B214L . . . . . . . . . . . .
B214R . . . . . . . . . . . .
B215S . . . . . . . . . . . .
B216S . . . . . . . . . . . .
B217-20 . . . . . . . . . .
101
101
101
101
101
B217-24 . . . . . . . . . . 167
B217AL . . . . . . . . . . . 177
B217FFAL . . . . . . . . 177
B217P . . . 167,177,199
B218 . . . . . . . . . . . . . 147
B129 . . . . . . . . . . . . . .
B132 . . . . . . . . . . . . . .
B133 . . . . . . . . . . . . . .
B134L . . . . . . . . . . . . .
B134R . . . . . . . . . . . . .
73
74
74
79
79
B174SHR
B175SHL
B175SHR
B176SHL
B176SHR
B56SH . . . . . . . . . . . . . 40
B62 . . . . . . . . . . . . . . 201
B62A . . . . . . . . . . . . . 201
B72 . . . . . . . . . . . . . . 202
B72A . . . . . . . . . . . . . 202
B135
B136
B137
B138
B139
..............
74
75
75
74
74
B177SHL
B177SHR
B178SHL
B178SHR
B179SHL
B101 . . . . . . . . . . . . . .
B102 . . . . . . . . . . . . . .
B103 . . . . . . . . . . . . . .
B104 . . . . . . . . . . . . . .
B104SH . . . . . . . . . . .
76
77
77
77
81
B140
B141
B142
B143
B147
..............
74
73
74
74
82
B179SHR
B180SHL
B180SHR
B181SHL
B181SHR
B105 . . . . . . . . . . . . . .
B106-12 . . . . . . . . . . .
B106-32 . . . . . . . . . . .
B106-42 . . . . . . . . . . .
B106-52 . . . . . . . . . . .
91
91
91
91
91
B148
B149
B150
B151
B152
..............
82
82
82
82
82
B182SHL
B182SHR
B183SHL
B183SHR
B184SHL
.........
B107 . . . . . . . . . . . . . . 87
B107-22A . . . . . . . . . . 87
B107S . . . . . . . . . 88,125
B108 . . . . . . . . . . . . . . 91
B109S . . . . . . . . . . . . . 81
B154
B155
B156
B157
B158
..............
82
83
83
83
83
B184SHR
B185SHL
B185SHR
B186SHL
B186SHR
........
B110
B111
B112
B113
B115
B159
B160
B161
B162
B163
..............
...............
91
92
81
81
77
83
83
83
82
82
B187 . . . . . . . . . . . . . .
B188 . . . . . . . . . . . . . .
B189 . . . . . . . . . . . . . .
B190 . . . . . . . . . . . . . .
B191-18 . . . . . . . . . . .
B116-12 . . . . . . . . . . .
B116-32 . . . . . . . . . . .
B116-32A . . . . . . . . . .
B116-42 . . . . . . . . . . .
B116-52 . . . . . . . . . . .
87
87
87
87
87
B164 . . . . . . . . . . . . . . 82
B165 . . . . . . . . . . . . . . 82
B166 Series . . . . . . 171
B166-46 Series . . . 171
B166CL . . . . . . . . . . 171
B191-24 . . . . . . . . . .
B192 . . . . . . . . . . . . .
B194 . . . . . . . . . . . . .
B195 . . . . . . . . . . . . .
B196-18 . . . . . . . . . .
100
100
102
103
102
B230 . . . . . . . . . . . . . .
B231 . . . . . . . . . . . . . .
B232 . . . . . . . . . . . . . .
B234L . . . . . . . . . . . . .
B234R . . . . . . . . . . . . .
76
76
77
79
79
B118
B119
B120
B121
B122
...............
79
94
95
95
95
B167
B168
B169
B170
B171
B196-24 . . . . . . . . . .
B198-6 . . . . . . . . . . .
B198-12 . . . . . . . . . .
B198A-6 . . . . . . . . . .
B198A-12 . . . . . . . .
102
102
102
102
102
B235L . . . . . . . . . . . . .
B235R . . . . . . . . . . . . .
B236L . . . . . . . . . . . . .
B236R . . . . . . . . . . . . .
B237 . . . . . . . . . . . . . .
78
78
78
78
78
B123
B124
B125
B126
B127
..............
95
95
79
80
80
B172 . . . . . . . . . . . . . . 86
B172-12 . . . . . . . . . . . 86
B172-22A . . . . . . . . . . 86
B173 . . . . . . . . . . . . . . 89
B174SHL . . . . . . . . . 101
...............
...............
...............
...............
...............
..............
..............
..............
..............
..............
..............
..............
40
42
41
40
42
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
86
86
86
86
86
........
.........
........
.........
........
.........
........
.........
........
.........
........
.........
........
.........
........
........
.........
........
.........
.........
........
.........
........
B200 . . . . . . . . . . . . . .
B200D . . . . . . . . . . . . .
B201 . . . . . . . . . . . . . .
B201D . . . . . . . . . . . . .
B202 . . . . . . . . . . . . . .
242
99
99
99
99
99
73
73
73
73
73
73
73
73
73
73
110,167
110,167
. . . . . 110,167,218
. . . . . 110,167,218
. . . . . . . . . . . . . 116
.........
.........
106
106
165
165
167
B238L . . . . . . . . . . . . . 78
B238R . . . . . . . . . . . . . 78
B239 . . . . . . . . . . . . . . 78
B241S . . . . . . . . . . . . 165
B243 . . . . . . . . . . . . . . 82
Index
82
82
82
82
82
B286 . . . . . . . . . 110,167
B287 . . . . . . . . . . . . . 110
B288 . . . . . . . . . . . . . 110
B289-12 . . . . . . . . . . 100
B289-14 . . . . . . . . . . 100
B337
B339
B340
B341
B342
..............
82
82
82
82
82
B290 . . . . . . . . . . . . .
B291 . . . . . . . . . . . . .
B292 . . . . . . . . . . . . .
B293 Series . . . . . .
B293A Series . . . . .
100
100
101
102
102
B346L . . . . . . . . . . . . . 95
B346R . . . . . . . . . . . . . 95
B349 . . . . . . . . . . . . . 108
B350 . . . . . . . . . . . . . 108
B351L Series . . . . . 113
B400 . . . . . . . . . . . . . .
B400-1 . . . . . . . . . . . .
B400-2 . . . . . . . . . . . .
B400-3 . . . . . . . . . . . .
B400-4 . . . . . . . . . . . .
B261 Series . . . . . . .
B266 . . . . . . . . . . . . . .
B267L . . . . . . . . . . . . .
B267R . . . . . . . . . . . . .
B268L . . . . . . . . . . . . .
85
88
94
94
94
B293PL . . . . . . . . . . . 103
B297 Series . . . . . . 101
B300 . . . . . . . . . . . . . . 98
B303 . . . . . . . . . . . . . 117
B304 . . . . . . . . . . . . . 117
B355 . . . . . . . . . . . . . 122
B356 . . . . . . . . . . . . . 146
B357 . . . . . . . . . . . . . . 78
B358 Series . . . . . . . 89
B359 . . . . . . . . . . . . . . 76
B405 . . . . . . . . . . 89,123
B405A . . . . . . . . . . . . 123
B407 Series . . . . . . . 92
B408 Series . . . . . . . 89
B409 Series . . . . . . 101
B268R
B269L
B269R
B270L
B270R
B305
B306
B307
B308
B309
117
117
117
117
117
B360
B361
B362
B363
B364
..............
.............
94
94
94
94
94
76
77
96
83
83
B410-11
B410-12
B410-22
B410-32
B410-52
B271 . . . . . . . . . . . . . .
B272 . . . . . . . . . . . . . .
B273 . . . . . . . . . . . . . .
B274L . . . . . . . . . . . . .
B274R . . . . . . . . . . . . .
95
95
95
96
96
B365
B366
B367
B368
B369
..............
83
83
83
83
83
B276 . . . . . . . . . . . . . .
B277 . . . . . . . . . . . . . .
B278 . . . . . . . . . . . . . .
B279 . . . . . . . . . . . . . .
B279FL . . . . . . . . . . . .
95
96
98
97
97
B370 . . . . . . . . . . . . . 103
B371 . . . . . . . . . . . . . . 80
B371-2 . . . . . . . . . . . . 81
B372 . . . . . . . . . . . . . . 80
B374 . . . . . . . . . . . . . . 77
B420-778 . . . . . . . . . . 76
B420-978 . . . . . . . . . . 76
B422 Series . . 125,140
B425 . . . . . . . . . . . . . . 88
B427 . . . . . . . . . . . . . 123
B279SQ . . . . . . . . . . .
B280 . . . . . . . . . . . . . .
B280FL . . . . . . . . . . . .
B280SQ . . . . . . . . . . .
B281 . . . . . . . . . . . . . .
97
97
97
97
98
B326
B327
B328
B329
B330
..............
82
82
82
82
82
B376 . . . . . . . . . . . . .
B377 . . . . . . . . . . . . .
B379 . . . . . . . . . . . . .
B380 Series . . . . . .
B381 . . . . . . . . . . . . .
109
109
150
218
107
B428 . . . . . . . . . . . . . . 93
B432 . . . . . . . . . . . . . . 75
B435 . . . . . . . . . . . . . 122
B436 . . . . . . . . . . . . . 166
B436S . . . . . . . . . . . . 166
B281A . . . . . . . . . . . . .
B281AFL . . . . . . . . . .
B281ASQ . . . . . . . . . .
B281FL . . . . . . . . . . . .
B281M . . . . . . . . . . . . .
97
97
97
98
98
B331 . . . . . . . . . . . . . .
B332 . . . . . . . . . . . . . .
B333-1 . . . . . . . . . . . .
B333-2 . . . . . . . . . . . .
B333-3 . . . . . . . . . . . .
82
82
89
89
89
B382 . . . . . . . . . . . . .
B383 . . . . . . . . . . . . .
B384 . . . . . . . . . . . . .
B385 . . . . . . . . . . . . .
B386 Series . . . . . .
107
107
107
107
144
B437 Series . . . . . .
B438 . . . . . . . . . . . . .
B439 . . . . . . . . . . . . .
B440 . . . . . . . . . . . . .
B441-22 Series . . .
B281MSQ . . . . . . . . . 98
B281SQ . . . . . . . . . . . 98
B283 . . . . . . . . . 110,167
B284 . . . . . . . . . 110,167
B285 . . . . . . . . . 110,167
B334 . . . . . . . . . . . . . .
B335 . . . . . . . . . . . . . .
B335-1 . . . . . . . . . . . .
B335-2 Series . . . . .
B335V Series . . . . . .
75
83
83
83
83
B387 Series . . . . . . . 92
B390BX . . . . . . . . . . 166
B390S . . . . . . . . . . . . 166
B392-11 Series . . . 168
B392-12 Series . . . 168
B244
B245
B246
B247
B248
..............
B249
B250
B251
B252
B253
..............
..............
..............
..............
..............
..............
..............
..............
.............
.............
.............
.............
.............
.............
.............
.............
.............
..............
..............
..............
243
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
75
75
73
73
73
...........
...........
...........
...........
...........
90
90
90
90
90
93
93
93
93
93
139
107
107
103
121
Index
..............
..............
Index
Index
B446A Series . . 54,172
B446B Series . . 54,172
B446C Series . 54,172
B447 . . . . . . . . . . . . . 168
B447A . . . . . . . . . . . . 168
B515 . . . . . . . . . . . . . . 93
B516 . . . . . . . . . . . . . 167
B516S . . . . . . . . . . . . 167
B518 Series . . . . . . 169
B519 . . . . . . . . . . . . . . 88
B601-62 . . . . . . . . . . 208
B602-A . . . . . . . . . . . 123
B602-B . . . . . . . . . . . 123
B602-C . . . . . . . . . . . 123
B613 . . . . . . . . . 108,125
B767 Series . . . . . .
B768 Series . . . . . .
B769 Series . . . . . .
B802D Series . . . . .
B809B Series . . . . .
B449-4 . . . . . . . . . . . 103
B449-8 . . . . . . . . . . . 103
B449-12 . . . . . . . . . . 103
B449-18 . . . . . . . . . . 103
B450 Series . . . . . . . 86
B521
B522
B526
B527
B528
..............
81
82
91
87
73
B613A . . . . . . . 108,125
B614 . . . . . . . . . 108,125
B616 Series . . . . . . 164
B616-22A Series . . 164
B616S Series . . . . . 164
B451-1 . . . . . . . . . . . . 89
B451-2 . . . . . . . . . . . . 89
B451-3 . . . . . . . . . . . . 89
B460 Series . . . . . . 166
B461 . . . . . . . . . . . . . . 81
B529
B532
B533
B534
B535
..............
77
75
80
92
92
B822A . . . . . . . . . . . . 110
B823-22 . . . . . . . . . . 111
B823-22A . . . . . . . . . 111
B823-42 . . . . . . . . . . 111
B823-52 . . . . . . . . . . 111
B464 Series . . . . . .
B465 . . . . . . . . . . . . .
B466S . . . . . . . . . . . .
B466W . . . . . . . . . . .
B472 . . . . . . . . . . . . .
166
166
171
171
106
B536
B538
B539
B541
B556
..............
90
92
92
99
75
B632 Series . . . . . . .
B633 Series . . . . . . .
B634 . . . . . . . . . . . . . .
B635 . . . . . . . . . . . . . .
B650 Series . . . . . . .
85
84
84
84
84
B825-22 . . . . . . . . . . 111
B825-52 . . . . . . . . . . 111
B844 . . . . . . . . . . . . . . 79
B844W . . . . . . . . . . . . 79
B852 . . . . . . . . . . . . . 110
B473 . . . . . . . . . . . . .
B474 . . . . . . . . . . . . .
B475 . . . . . . . . . . . . .
B477 . . . . . . . . . . . . .
B477H . . . . . . . . . . . .
106
106
106
109
109
B557
B558
B560
B562
B568
73
. . . . . . . . . . . . . . 77
. . . . . . . . . . . . . 108
. . . . . . . . . . . . . 108
. . . . . . . . . . . . . . 75
B655 Series . . . . . . . 58
B656 Series . . . . . . . 58
B663 . . . . . . . . . . . . . . 80
B664 . . . . . . . . . . . . . 107
B670 Series . . . . . . 140
B477HP . . . . . . . . . .
B477P . . . . . . . . . . . .
B478 . . . . . . . . . . . . .
B478H . . . . . . . . . . . .
B478HP . . . . . . . . . .
109
109
109
109
109
B570 . . . . . . . . . . . . . .
B570A . . . . . . . . . . . . .
B571 . . . . . . . . . . . . . .
B578 . . . . . . . . . . . . . .
B580 . . . . . . . . . . . . . .
B671
B700
B701
B702
B705
B1512S . . . . . . . . . .
B1516 . . . . . . . . . . . .
B1516S . . . . . . . . . .
B1520 . . . . . . . . . . . .
B1520S . . . . . . . . . .
132
132
132
132
132
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
..............
98
98
96
88
93
Series
Series
Series
140
120
. . . . . . 118
. . . . . . . . . . . . . 119
Series . . . . . . 119
......
......
170
170
170
104
105
B478P . . . . . . . . . . . . 109
B479 . . . . . . . . . . . . . 151
B485 . . . . . . . . . . . . . . 80
B488 . . . . . . . . . . . . . . 82
B494 Series . . . . . . 101
B581 . . . . . . . . . . . . . . 88
B585 . . . . . . . . . . . . . . 98
B586 . . . . . . . . . . . . . . 91
B587 Series . . . . . . 107
B588 . . . . . . . . . . . . . . 87
B1524S
B1532S
B1534S
B1540S
B1548S
..........
132
132
132
132
132
B495 . . . . . . . . . . . . . . 96
B496 . . . . . . . . . . . . . . 81
B496-1 . . . . . . . . . . . . 81
B500 Series . . . 52,120
B501 Series . . . . . . . 52
B589 . . . . . . . . . . . . .
B589-62 . . . . . . . . . .
B590 . . . . . . . . . . . . .
B591 Series . . . . . .
B593 . . . . . . . . . . . . .
171
207
172
145
125
B752 . . . . . . . . . . . . .
B753 Series . . . . . .
B755 . . . . . . . . . . . . .
B755-3/8-J Series .
B756-3/8 . . . . . . . . . .
118
118
119
119
119
B1556S . . . . . . . . . .
B1564S . . . . . . . . . .
B1999 . . . . . . . . . . . .
B2000 . . . . . . . . . . . .
B2001 . . . . . . . . . . . .
132
132
137
128
128
B503L . . . . . . . . . . . . . 80
B503R . . . . . . . . . . . . . 80
B504 . . . . . . . . . . . . . . 74
B514L . . . . . . . . . . . . 106
B514R . . . . . . . . . . . . 106
B594 . . . . . . . . . . . . . . 88
B595 . . . . . . . . . . . . . . 89
B596 . . . . . . . . . . . . . . 88
B598-62 . . . . . . . . . . 210
B600-62 . . . . . . . . . . 204
B760-22 Series . . .
B760-22A Series . .
B761-22 Series . . .
B761-22A Series . .
B766 Series . . . . . .
124
124
124
124
170
B2001AL . . . . . . . . . 178
B2001SS4 . . . . . . . . 181
B2002 . . . . . . . . . . . . 128
B2003 . . . . . . . . . . . . 128
B2004 . . . . . . . . 128,130
244
..........
..........
..........
..........
Index
131
131
131
139
139
B2208
B2209
B2210
B2211
B2212
139
139
139
139
139
B2213 . . . . . . . . . . . . 127
B2301 Series . . . . . 141
B2302 Series . . . . . 141
B2308 . . . . . . . . . . . . 211
B2309 . . . . . . . . . . . . 211
139
139
139
139
141
B2310
B2311
B2312
B2313
B2314
............
B2315
B2350
B2351
B2352
B2353
............
............
141
141
141
141
141
130
130
129
130
130
B2090 . . . . . . . . . . . .
B2091 . . . . . . . . . . . .
B2110 . . . . . . . . . . . .
B2110DCU . . . . . . .
B2111 . . . . . . . . . . . .
141
141
131
129
131
B2354 . . . . . . . . . . . . 211
B2355 . . . . . . . . . . . . 211
B2400 Series . . . . . 138
B2417 Series . . . . . 139
B2500 . . . . . . . . . . . . 217
B2046 . . . . . . . . . . . .
B2046DCU . . . . . . .
B2047 . . . . . . . . .
B2048 . . . . . . . . . . . .
B2050 . . . . . . . . . . . .
130
129
130
130
130
B2112
B2113
B2115
B2116
B2117
............
131
131
131
131
131
B2501 Series . . . . .
B2503 . . . . . . . . . . . .
B2505 . . . . . . . . . . . .
B2506 . . . . . . . . . . . .
B2507 . . . . . . . . . . . .
217
217
217
217
217
B2016SS4 . . . . . . . . 181
B2017 . . . . . . . . 128,130
B2017AL . . . . . . . . . 178
B2017SS4 . . . . . . . . 181
B2018 . . . . . . . . 128,131
B2050DCU . . . . . . .
B2051 . . . . . . . . . . . .
B2052 . . . . . . . . . . . .
B2054 . . . . . . . . . . . .
B2054DCU . . . . . . .
129
130
130
130
129
B2118
B2119
B2120
B2121
B2123
............
............
131
131
131
131
131
B2508
B2601
B2602
B2603
B2608
217
133
133
133
133
B2018AL . . . . . . . . . 178
B2018SS4 . . . . . . . . 181
B2019 . . . . . . . . 128,131
B2019AL . . . . . . . . . 178
B2019SS4 . . . . . . . . 181
B2055
B2056
B2058
B2059
B2060
............
130
130
130
131
131
B2124 . . . . . . . . . . . .
B2125 . . . . . . . . . . . .
B2126 . . . . . . . . . . . .
B2126DCU . . . . . . .
B2127 . . . . . . . . . . . .
131
131
131
129
131
B2609 . . . . . . . . . . . . 133
B2610 . . . . . . . . . . . . 133
B3033 Series . . . . . 114
B3034 Series . . . . . 114
B3036L Series . . . . 113
B2020 . . . . . . . . 128,131
B2020AL . . . . . . . . . 178
B2020SS4 . . . . . . . . 181
B2021 . . . . . . . . 128,131
B2022 . . . . . . . . 128,131
B2062 . . . . . . . . . . . .
B2062DCU . . . . . . .
B2063 . . . . . . . . . . . .
B2064 . . . . . . . . . . . .
B2066 . . . . . . . . . . . .
131
129
131
131
131
B2128
B2129
B2130
B2132
B2207
131
. . . . . . . . . . . . 131
. . . . . . . . 128,131
. . . . . . . . 128,131
. . . . . . . . . . . . 127
B3037Z . . . . . . . . . . . 115
B3322 . . . . . . . . 110,218
B3332 . . . . . . . . 110,218
B3342 . . . . . . . . 110,218
B3352 . . . . . . . . 110,218
B2023 . . . . . . . . . . . .
B2024 . . . . . . . . . . . .
B2024DCU . . . . . . .
B2025 . . . . . . . . . . . .
B2025DCU . . . . . . .
130
130
129
130
129
B2067
B2068
B2069
B2070
B2071
............
B2008SS4 . . . . . . . .
B2009 . . . . . . . . . . . .
B2009AL . . . . . . . . .
B2009SS4 . . . . . . . .
B2010 . . . . . . . . . . . .
181
128
178
181
128
B2026 . . . . . . . . . . . .
B2026DCU . . . . . . .
B2027 . . . . . . . . . . . .
B2027DCU . . . . . . .
B2029 . . . . . . . . . . . .
130
129
130
129
130
B2072
B2073
B2074
B2075
B2076
............
B2010AL . . . . . . . . . 178
B2010SS4 . . . . . . . . 181
B2011 . . . . . . . . 128,130
B2011AL . . . . . . . . . 178
B2011DCU . . . . . . . 129
B2030 . . . . . . . . . . . .
B2030DCU . . . . . . .
B2031 . . . . . . . . . . . .
B2032 . . . . . . . . . . . .
B2032DCU . . . . . . .
130
129
130
130
129
B2077
B2078
B2079
B2080
B2084
............
B2011SS4 . . . . . . . . 181
B2012 . . . . . . . . . . . . 128
B2012AL . . . . . . . . . 178
B2012SS4 . . . . . . . . 181
B2013 . . . . . . . . 128,130
B2036 . . . . . . . . . . . .
B2037 . . . . . . . . . . . .
B2038 . . . . . . . . . . . .
B2038DCU . . . . . . .
B2039 . . . . . . . . . . . .
130
130
130
129
130
B2085
B2086
B2087
B2088
B2089
............
B2013AL . . . . . . . . . 178
B2013SS4 . . . . . . . . 181
B2014 . . . . . . . . 128,130
B2014AL . . . . . . . . . 178
B2014SS4 . . . . . . . . 181
B2041 . . . . . . . . . . . .
B2042 . . . . . . . . . . . .
B2042DCU . . . . . . .
B2043 . . . . . . . . . . . .
B2045 . . . . . . . . . . . .
B2015 . . . . . . . . 128,130
B2015AL . . . . . . . . . 178
B2015SS4 . . . . . . . . 181
B2016 . . . . . . . . 128,130
B2016AL . . . . . . . . . 178
............
............
............
............
245
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
127
127
127
127
127
211
211
211
211
211
211
211
211
211
211
Index
B2005 . . . . . . . . 128,130
B2006 . . . . . . . . . . . . 128
B2008 . . . . . . . . 128,130
B2008AL . . . . . . . . . 178
B2008DCU . . . . . . . 129
Index
Index
B3362
B3363
B3364
B3365
B3367
Series
Series
Series
Series
Series
B4051
B4060
B4061
B4062
B4063
............
.....
113
113
113
113
115
B3367S-1 Series .
B3367S-2 Series .
B3373 Series . . . . .
B3690 Series . . . . .
B3690F Series . . . .
140
140
142
143
143
B4064
B4065
B4066
B4067
B4068
............
B4000
B4001
B4002
B4003
B4004
............
175
175
175
175
175
B4069
B4070
B4071
B4072
B4073
............
B4005
B4006
B4007
B4008
B4009
............
175
175
175
175
175
B4074
B4075
B4076
B4077
B4078
............
B4010
B4011
B4012
B4013
B4014
............
B4079
B4080
B4081
B4082
B4083
............
............
175
175
175
175
175
B4015 . . . . . . . . . . . .
B4016 . . . . . . . . . . . .
B4017 . . . . . . . . . . . .
B4033A . . . . . . . . . . .
B4033B . . . . . . . . . .
175
175
175
175
175
B4084
B4085
B4086
B4087
B4088
............
B4033C
B4033D
B4033E
B4033F
B4033G
175
175
175
175
175
B4089
B4090
B4091
B4092
B4093
............
B4094
B4095
B6101
B6102
B6103
............
..........
175
175
174
174
174
B4035D . . . . . . . . . .
B4035E . . . . . . . . . .
B4035F . . . . . . . . . . .
B4037B . . . . . . . . . .
B4050 . . . . . . . . . . . .
174
174
174
174
174
B4033H
B4033I
B4035A
B4035B
B4035C
.....
.....
.....
.....
............
............
............
............
............
............
............
............
............
............
............
..........
..........
..........
...........
..........
..........
...........
...........
..........
............
210
207
207
207
207
B6202
B6205
B6211
B6230
B6232
B6129 . . . . . . . . . . . .
B6132 . . . . . . . . . . . .
B6133 . . . . . . . . . . . .
B6134L . . . . . . . . . . .
B6134R . . . . . . . . . .
203
205
205
207
207
B6234L . . . . . . . . . . .
B6234R . . . . . . . . . .
B6239 . . . . . . . . . . . .
B6337 . . . . . . . . . . . .
B6340 . . . . . . . . . . . .
B6135
B6136
B6138
B6139
B6140
............
205
205
204
204
204
B6341 . . . . . . . . . . . . 204
B6357 . . . . . . . . . . . . 206
B6374 . . . . . . . . . . . . 206
B6409 Series . . . . . 211
B6504 . . . . . . . . . . . . 204
173
173
173
173
173
B6141 . . . . . . . . . . . .
B6142 . . . . . . . . . . . .
B6143 . . . . . . . . . . . .
B6144L . . . . . . . . . . .
B6144R . . . . . . . . . .
204
205
204
206
206
B6526
B6532
B6533
B6557
B6558
............
173
173
173
173
173
B6147
B6148
B6149
B6150
B6151
............
208
208
208
208
208
B6571
B6594
B7105
B7116
B7205
............
173
173
173
173
173
B6152
B6154
B6155
B6156
B6157
............
208
208
208
208
208
BC442 . . . . . . . . . . . . 116
BD40 . . . . . . . . . . . . . 218
BE-5-8 . . . . . . . . . . . .218
BE-9-12 . . . . . . . . . . 218
BFP22 . . . . . . . 184,185
173
173
173
173
173
B6158
B6159
B6160
B6161
B6162
............
208
208
208
208
208
BFP22A . . . . . . 184,185
BFP22H17/8 . . . . . . 184
BFP22I . . . . . . . . . . . 188
BFP22SH . . . . . . . . 184
BFP42 . . . . . . . 186,187
B6163
B6164
B6165
B6167
B6168
............
............
174
174
205
206
206
208
208
208
209
209
BFP42A . . . . . . 186,187
BFP42H17/8 . . . . . . 186
BFP42SH . . . . . . . . 186
BFP409 Series . . . 194
BFP494 Series . . . 194
B6104 . . . . . . . . . . . .
B6105 . . . . . . . . . . . .
B6107 . . . . . . . . . . . .
B6107-62A . . . . . . .
B6108 . . . . . . . . . . . .
206
210
209
209
210
B6169
B6170
B6171
B6172
B6173
............
208
209
209
209
210
BFP2400-2
BFP2400-3
BFP2400-4
BFP2400-6
BFP3104-8
............
............
............
............
............
............
............
............
174
173
173
173
173
B6110
B6112
B6118
B6126
B6127
173
173
173
173
173
173
173
. . . . . . . . . 173
. . . . . . . . . . . . 173
. . . . . . . . . . . . 173
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
246
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
203
. . . . . . . . . . . . 211
. . . . . . . . . . . . 211
. . . . . . . . . . . . 205
. . . . . . . . . . . . 206
............
............
............
............
............
207
207
206
205
203
210
205
207
204
206
210
. . . . . . . . . . . . 209
. . . . . . . . . . . . 210
. . . . . . . . . . . . 209
. . . . . . . . . . . . 211
.......
.......
.......
.......
.......
192
192
192
192
193
Index
BFV409 Series . . .
BFV494 Series . . .
BFV501 Series . . .
BFV532 . . . . . . . . . .
BFV557 . . . . . . . . . .
194
194
188
197
195
BKC100 . . . . . . . . . . .
BKC200 . . . . . . . . . . .
BKCC . . . . . . . . . . . . .
BKF100-4 . . . . . . . . . .
BKF100-6 . . . . . . . . . .
59
59
60
61
61
BMM-5S . . . . . . . . . . 203
BMM-6 . . . . . . . . . . . 203
BMM-6L . . . . . . . . . . 203
BMM-6S . . . . . . . . . . 203
BMS-6 . . . . . . . . . . . . . 46
BFV22I . . . . . . . . . . . 188
BFV22SH . . . . . . . . 184
BFV42 . . . . . . . 186,187
BFV42A . . . . . . 186,187
BFV42H17/8 . . . . . . 186
BFV558 . . . . . . . . . .
BFV650 . . . . . . . . . .
BFV655 Series . . .
BFV751-1/2 . . . . . . .
BFV751-3/8 . . . . . . .
198
199
190
192
192
BKH-094 Series . . . .
BKH-094K Series . .
BKL-063 Series . . . .
BKL-063K Series . .
BKL-094 Series . . . .
64
64
63
63
63
BMS-6L . . . . . . . . . . . .
BMS-6M . . . . . . . . . . .
BMS-6S . . . . . . . . . . .
BMS-8 . . . . . . . . . . . . .
BMS-8L . . . . . . . . . . . .
47
47
47
46
47
BFV42SH . . . . . . . .
BFV100 . . . . . . . . . .
BFV101 . . . . . . . . . .
BFV103 . . . . . . . . . .
BFV104 . . . . . . . . . .
186
191
198
198
198
BFV751-5/8 . . . . . . .
BFV751J-1/2 . . . . . .
BFV751J-3/8 . . . . . .
BFV751J-5/8 . . . . . .
BFV755-1/2 . . . . . . .
192
192
192
192
193
BKL-094K Series . .
BKP10063 . . . . . . . . .
BKP10094 . . . . . . . . .
BKP20125 . . . . . . . . .
BKP20188 . . . . . . . . .
63
60
60
60
60
BMS-8M . . . . . . . . . . .
BMS-8S . . . . . . . . . . .
BMS-10 . . . . . . . . . . . .
BMS-10L . . . . . . . . . .
BMS-10M . . . . . . . . . .
47
47
46
47
47
BFV118
BFV129
BFV132
BFV133
BFV135
...........
198
185
196
196
197
BFV755-3/8 . . . . . . .
BFV2008 . . . . . . . . .
BFV2009 . . . . . . . . .
BFV2010 . . . . . . . . .
BFV2011 . . . . . . . . .
193
191
191
191
191
BKT-063 Series . . . .
BKT-063K Series . .
BKW063 . . . . . . . . . . .
BKW094 . . . . . . . . . . .
BKW125 . . . . . . . . . . .
66
66
59
59
59
BMS-10S . . . . . . . . . .
BMS-12 . . . . . . . . . . . .
BMS-12M . . . . . . . . . .
BMS-12S . . . . . . . . . .
BMS-D-12 . . . . . . . . .
47
46
47
47
46
BFV136
BFV140
BFV141
BFV142
BFV143
..........
..........
197
196
195
197
196
BFV2012
BFV2013
BFV2014
BFV2015
BFV2016
.........
191
191
191
191
191
BKW188 . . . . . . . . . . .
BKYH18-094 . . . . . . .
BKYH18-094 Series .
BKYH18-094K Series
BKYH30-094 . . . . . . .
59
64
65
65
64
BMS-D-12L . . . . . . . .
BMS-D-12M . . . . . . .
BMT-6 . . . . . . . . . . . . .
BMT-8 . . . . . . . . . . . . .
BMT-10 . . . . . . . . . . . .
47
47
48
48
48
BFV200 . . . . . . . . . .
BFV201 . . . . . . . . . .
BFV202 . . . . . . . . . .
BFV-223 . . . . . . . . . .
BFV-223WO . . . . . .
191
195
195
189
189
BFV2017 . . . . . . . . .
BFV3104 -1 thru 6
BFV3104-8 . . . . . . .
BFV3104-10 . . . . . .
BFV3104-12 . . . . . .
191
193
193
193
193
BKYH30-094 Series .
BKYH30-094K Series
BKYT12-063 . . . . . . .
BKYT12-063 Series .
BKYT12-063K Series
65
65
66
67
67
BMT-12 . . . . . . . . . . . . 48
BMT-D-12 . . . . . . . . . 48
BP081SS . . . . . . . . . 133
BP110SS . . . . . . . . . 133
BP135SS . . . . . . . . . 133
BFV-224 . . . . . . . . . .
BFV-224WO . . . . . .
BFV-225 . . . . . . . . . .
BFV-225WO . . . . . .
BFV-228 . . . . . . . . . .
189
189
189
189
189
BFVATR Series . . .
BFVATRHN Series
BFVFW Series . . . .
BFVHHCS Series .
BFVHN Series . . . .
190
190
190
189
189
BKYT18-063 . . . . . . .
BKYT18-063 Series .
BKYT18-063K Series
BKYT30-063 . . . . . . .
BKYT30-063 Series .
66
67
67
66
67
BP175SS
BP205SS
BP250SS
BP300SS
BP325SS
BFV-228WO . . . . . .
BFV280SQ . . . . . . .
BFV281SQ . . . . . . .
BFV300 . . . . . . . . . .
BFV334 . . . . . . . . . .
189
199
199
191
197
BHR1225ZN . . . . . . .
BHR1238ZN . . . . . . .
BHR1250ZN . . . . . . .
BHR1262ZN . . . . . . .
BKA25-063 Series .
58
58
58
58
70
BKYT30-063K Series 67
BL1400 Series . . . . 142
BMM-3 . . . . . . . . . . . 203
BMM-3L . . . . . . . . . . 203
BMM-3S . . . . . . . . . . 203
BP375SS . . . . . . . . . 133
BP425SS . . . . . . . . . 133
BP475SS . . . . . . . . . 133
BPC Series . . . . . . . 127
BTS22TH . . . . . . . 38,39
BFV337 . . . . . . . . . .
BFV340 . . . . . . . . . .
BFV341 . . . . . . . . . .
BFV342 . . . . . . . . . .
BFV371-2G . . . . . . .
197
195
196
196
198
BKA25-063K Series
BKB25-063 Series
BKB25-06K3 Series
BKB38-094 Series
BKB38-094K Series
70
68
69
68
69
BMM-4 . . . . . . . . . . .
BMM-4L . . . . . . . . . .
BMM-4S . . . . . . . . . .
BMM-5 . . . . . . . . . . .
BMM-5L . . . . . . . . . .
BVP Series . . . . . . .
BVS-12 . . . . . . . . . . .
BVS-120 . . . . . . . . .
BVT Series . . . . . . .
CLDP10 . . . . . . . . . .
..........
..........
..........
..........
..........
..........
..........
.........
.........
.........
.........
.
.
.
.
.
247
203
203
203
203
203
.........
.........
.........
.........
.........
133
133
133
133
133
135
137
137
134
155
Index
BFP3104-10 . . . . . . 193
BFP3104-12 . . . . . . 193
BFV22 . . . . . . . 184,185
BFV22A . . . . . . 184,185
BFV22H17/8 . . . . . . 184
Index
Index
CNPSS Series . . . . . 53
DB__DS Series 156,157
DB5 . . . . . . . . . . . . . . 153
DB10 . . . . . . . . . . . . . 153
DB10-28 . . . . . . . . . . 154
N223 . . . . . . . . . . . . . . 47
N223WO . . . . . . . . . . 46
N224 . . . . . . . . . . . . . . 47
N224SS6 . . . . 179,181
N224WO . . . . . . . . . . 46
N624 . . . . . . . . . . . . . 203
N624WO . . . . . . . . . 203
N627 . . . . . . . . . . . . . 203
N627WO . . . . . . . . . 203
N721 . . . . . . . . . . . . . . 47
SLWN3/8
SLWN5/8
SLWNM6
SLWNM8
SLWNM10
.........
56
56
56
56
56
DB10-36 . . . . . . . . . .
DB10-42 . . . . . . . . . .
DB10-50 . . . . . . . . . .
DB10-60 . . . . . . . . . .
DB20 . . . . . . . . . . . . .
154
154
154
154
153
N224WOSS6 . 178,181
N225 . . . . . . . . . . . . . . 47
N225SS6 . . . . 179,181
N225WO . . . . . . . . . . 46
N225WOSS6 . 179,181
N722 . . . . . . . . . . . . . . 47
N723 . . . . . . . . . . . . . . 47
N724 . . . . . . . . . . . . . . 47
N724SS6 . . . . . . . . . 179
N725 . . . . . . . . . . . . . . 47
SLWNM12 . . . . . . . . .
SN224 Series . . . . . .
SN224WO Series . .
SN225 Series . . . . . .
SN225WO Series . .
56
49
48
49
48
DB30 . . . . . . . . . . . . .
DB40 . . . . . . . . . . . . .
DB48 . . . . . . . . . . . . .
DB610 . . . . . . . . . . . .
DB620 . . . . . . . . . . . .
153
153
153
153
153
N226 . . . . . . . . . . . . . .
N226WO . . . . . . . . . .
N227 . . . . . . . . . . . . . .
N227WO . . . . . . . . . .
N228 . . . . . . . . . . . . . .
47
46
47
46
47
N725SS6 . . . . . . . . . 179
N726 . . . . . . . . . . . . . . 47
N727 . . . . . . . . . . . . . . 47
N728 . . . . . . . . . . . . . . 47
N728SS6 . . . . . . . . . 179
SN228 Series . . . . . .
SN228WO Series . .
SN524 Series . . . . . .
SN525 Series . . . . . .
SN525WO Series . .
49
48
49
49
48
DB630 . . . . . . . . . . . .
DB640 . . . . . . . . . . . .
DB648 . . . . . . . . . . . .
DBE10-8 . . . . . . . . .
DBE10-12 . . . . . . . .
153
153
153
155
155
N228SS6 . . . . 179,181
N228WO . . . . . . . . . . 46
N228WOSS6 . 179,181
N255 . . . . . . . . . . . . . . 47
N255WO . . . . . . . . . . 46
N755 . . . . . . . . . . . . . . 47
N775 . . . . . . . . . . . . . . 47
N778 . . . . . . . . . . . . . . 47
N2500 Series . . . . . 217
N7221 . . . . . . . . . . . . 203
SN528 Series . . . . . .
SN724 Series . . . . . .
SN725 Series . . . . . .
SN728 Series . . . . . .
SQN Series . . . . . . . .
49
49
49
49
55
DBE10-16 . . . . . . . .
DBM . . . . . . . . . . . . .
DBM-__ Series . . .
DBM-__CT Series
DBP . . . . . . . . . . . . . .
155
153
154
154
153
N275 . . . . . . . . . . . . . .
N275WO . . . . . . . . . .
N278 . . . . . . . . . . . . . .
N278WO . . . . . . . . . .
N521 . . . . . . . . . . . . . .
N7222 . . . . . . . . . . . . 203
N7224 . . . . . . . . . . . . 203
N7227 . . . . . . . . . . . . 203
NW524 . . . . . . . . . . . . 49
NW525 . . . . . . . . . . . . 49
SRHMS Series
STN224 Series
STN225 Series
STN228 Series
STN525 Series
53
48
48
48
48
DBR10-12 . . . . . . . .
DBR2-31/2 . . . . . . .
DBR4-6 . . . . . . . . . .
DBR8-10 . . . . . . . . .
DBR12-14 . . . . . . . .
155
158
158
158
158
N522 . . . . . . . . . . . . . . 47
N523 . . . . . . . . . . . . . . 47
N524 . . . . . . . . . . . . . . 47
N524SS6 . . . . 179,181
N525 . . . . . . . . . . . . . . 47
NW528 . . . . . . . . . . . .
NWM6 . . . . . . . . . . . . .
NWM8 . . . . . . . . . . . . .
NWM10 . . . . . . . . . . . .
NWM12 . . . . . . . . . . . .
49
49
49
49
49
TN221
TN222
TN223
TN224
TN225
.............
DBR16-20 . . . . . . . . 158
DCN 3/8 . . . . . . . . . . . . 52
FFW Series . . . . . . . . 56
FW Series . . . . . . . . . 56
HHCS Series . . . . . . 53
N525SS6 . . . . 179,181
N525WO . . . . . . . . . . 46
N525WOSS6 . . . . . 179
N526 . . . . . . . . . . . . . . 47
N527 . . . . . . . . . . . . . . 47
SA101
SA102
SA110
SA131
SA154
............
227
227
227
227
227
TN226
TN227
TN228
TN255
TN525
.............
HN Series . . . . . . . . . 55
IPH Series . . . . . . . . 136
IPH18230 . . . . . . . . 136
ISO . . . . . . . . . . . . . . . 137
LW Series . . . . . . . . . 56
N528 . . . . . . . . . . . . . . 47
N528SS6 . . . . 179,181
N555 . . . . . . . . . . . . . . 47
N555WO . . . . . . . . . . 46
N575 . . . . . . . . . . . . . . 47
SA155
SA158
SA276
SA318
SC228
............
MSQN Series . . . . . .
N221 . . . . . . . . . . . . . .
N221WO . . . . . . . . . .
N222 . . . . . . . . . . . . . .
N222WO . . . . . . . . . .
N575WO . . . . . . . . . . 46
N621 . . . . . . . . . . . . . 203
N621WO . . . . . . . . . 203
N622 . . . . . . . . . . . . . 203
N622WO . . . . . . . . . 203
SC-UB . . . . . . . . . . . . .
SFHMS Series . . . . .
SHHMS Series . . . . .
SLWN1/4 . . . . . . . . . .
SLWN1/2 . . . . . . . . . .
55
47
46
47
46
47
46
47
46
47
248
............
............
............
............
227
223-226
. . . . . . . 223-226
. . . . . . . 223-226
. . . . . . . . . . . . . 57
.......
57
53
53
56
56
..........
..........
..........
..........
.....
....
....
....
....
.............
.............
.............
.............
.............
.............
.............
.............
48
48
48
48
48
48
48
48
48
48
Cooper B-Line reserves the right to make changes to the specifications, materials, equipment, prices, or the
availability of products at any time without prior notice. While every effort has been made to assure the
accuracy of information contained in this catalog at the time of publication, we cannot accept responsibility
for inaccuracies resulting from undetected errors or omissions.
Global Locations
Cooper B-Lines U.S. Customer Service
Center is staffed Monday through Friday from
7 a.m. to 5:00 p.m. Central Standard Time.
If a situation requires that you have to contact
us after hours, please leave a message via
phone or E-mail so we can give it immediate
attention the following business day.
Cooper B-Line
509 West Monroe Street
Highland, IL 62249
Phone: 800-851-7415
Fax: 618-654-1917
www.cooperbline.com
SS-12
Printed in U.S.A.
401211