Simatic s7-1200 Catalog

Siemens AG 2011
SIMATIC S7-1200
4/2 4/4 4/4 4/13 4/22 4/31 4/31 4/34 4/37 4/40 4/40 4/43 4/46 4/50 4/53 4/58 4/62 4/62 4/63 4/65 4/67 Introduction Central processing units CPU 1211C CPU 1212C CPU 1214C SIPLUS central processing units SIPLUS CPU 1211C SIPLUS CPU 1212C SIPLUS CPU 1214C Digital modules SM 1221 digital input module SB 1221 digital input module SM 1222 digital output module SB 1222 digital output module SM 1223 digital input/output module SB 1223 digital input/output module SIPLUS digital modules SIPLUS SM 1221 digital input module SIPLUS SM 1222 digital output module SIPLUS SM 1223 digital input/output module SIPLUS SB 1223 digital input/output module Analog modules SM 1231 analog input module SB 1231 analog input module SM 1232 analog output module SB 1232 analog output module SM 1234 analog input/output module SM 1231 thermocouple module SB 1231 thermocouple signal board SM 1231 RTD signal module SB 1231 RTD signal board SIPLUS analog modules SIPLUS SM 1231 analog input module SIPLUS SM 1232 analog output module SIPLUS SB 1232 analog output module SIPLUS SM 1234 analog input/output module 4/95 4/95 4/96 4/96 4/98 4/100 4/102 4/104 4/106 4/107 Ch. 3 4/109 4/110 4/110 4/112 4/112 4/113 4/113 4/120 4/120 4/122 Special modules SIM 1274 simulator
4
Communication CM 1241 communication module RS485 CB 1241 communication board CM 1242-5 CM 1243-5 CSM 1277 unmanaged SIPLUS NET CSM 1277 CP 1242-7 Telecontrol Server Basic SIPLUS CM 1241 communication module Power supplies SIMATIC S7-1200 PM 1207 SIPLUS power supplies SIPLUS PM 1207 power supplies Operator control and monitoring Basic panels - Standard SIPLUS operator control and monitoring SIPLUS basic panels Software
4/68 4/68 4/71 4/73 4/76 4/78 4/81 4/84 4/86 4/89 4/91 4/91 4/92 4/93 4/94
Brochures For brochures serving as selection guides for SIMATIC products refer to: http://www.siemens.com/simatic/ printmaterial
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Introduction
S7-1200
Overview
Technical specifications
General technical specifications SIMATIC S7-1200 Degree of protection Ambient temperature Operation (95% humidity) - horizontal installation - vertical installation Transportation and storage - with 95% humidity IP20 acc. to IEC 529
0 ... 55 C 0 ... 45 C -40 ... +70 C 25 ... 55 C 500 V AC test voltage 1500 V AC test voltage 1500 V AC test voltage 1500 V AC test voltage 1500 V AC test voltage Requirements of the EMC directive Test acc. to: IEC 801-2, IEC 801-3, IEC 801-4, EN 50141, EN 50204, IEC 801-5, VDE 0160 Test according to EN 55011, Class A, Group 1 IEC 68, Part 2-6: 10 ... 57 Hz; constant amplitude 0.3 mm; 58 ... 150 Hz; constant acceleration 1 g (mounted on DIN rail) or 2 g (mounted in switchboard); mode of vibration: frequency sweeps with a sweep rate of 1 octave/minute; duration of vibration: 10 frequency sweeps per axis in each direction of the three mutually perpendicular axes IEC 68, Part 2-27/half-sine: magnitude of shock 15 g (peak value), duration 11 ms, 6 shocks in each of the three mutually perpendicular axes
Insulation 5/24 V DC circuits 115/230 V AC circuits to ground 115/230 V AC circuits to 115/230 V AC circuits 230 V AC circuits to 5/24 V DC circuits 115 V AC circuits to 5/24 V DC circuits
The new modular miniature controller from the SIMATIC S7 family Comprising: - Controller with integrated PROFINET IO controller interface for communication between SIMATIC controllers, HMI, programming device or other automation components - Communication module with PROFIBUS DP master interface - Communication module PROFIBUS DP slave interface - GPRS module for connection to GSM/GPRS mobile phone networks - Integrated web server with standard and user-specific web pages - Data logging functionality for archiving of data at runtime from the user program - Powerful, integrated technology functions such as counting, measuring, closed-loop control, and motion control - Integrated digital and analog inputs/outputs - Signal boards for direct use in a controller - Signal modules for expansion of controllers by input/output channels - Communication modules for expansion of controllers with additional communications interfaces - Accessories, e.g. power supply, switch module or SIMATIC Memory Card The miniature controller that offers maximum automation at minimum cost. Extremely simple installation, programming and operation. Large-scale integration, space-saving, powerful. Suitable for small to medium-size automation engineering applications. Can be used both for simple controls and for complex automation tasks. All CPUs can be used in stand-alone mode, in networks and within distributed structures. Suitable for applications where programmable controllers would not have been economically viable in the past. With exceptional real-time performance and powerful communication options.
Electromagnetic compatibility Noise immunity acc. to EN 50082-2 Emitted interference acc. to EN 50081-1 and EN 50081-2 Mechanical strength Vibrations, test acc. to / tested with
Shocks, test acc. to / tested with
4/2
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Introduction
S7-1200
Technical specifications (continued)

General technical specifications SIPLUS S7-1200 Ambient temperature range Conformal coating Technical specifications -25 ... +55/70 C Coating of the PCB and the electronic components The technical specifications of the standard product apply except for the ambient conditions. 5 100 %, condensation permitted Conformity with EN 60721-3-3, class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, class 3C4 incl. salt mist and ISA S71.04 severity level G1; G2; G3; GX1) 2) Conformity with EN 60721-3-3, class 3S4 incl. conductive sand, dust2) 1080 ... 795 hPa (-1000 +2000 m) See ambient temperature range 795 ...658 hPa (+2000 ... + 3500m) Derating 10K 658 540 hPa (+3500 +5000 m) Derating 20 K
Ambient conditions Relative humidity Biologically active substances
Chemically active substances
Mechanically active substances
Air pressure (depending on the highest positive temperature range specified)
1)
2)
ISA S71.04 severity level GX: long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm limit value (max 30 min): SO2 < 17.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!
Siemens ST 70 2011
4/3
Siemens AG 2011
SIMATIC S7-1200
Central processing units
CPU 1211C
Overview
The clever compact solution With 10 integral input/outputs Expandable by: - 1 signal board (SB) or communication board (CB) - max. 3 communication modules (CM)
6ES7 211-1BD30-0XB0 Product type designation Product version associated programming package Supply voltages Rated value 24 V DC permissible range, lower limit (DC) permissible range, upper limit (DC) 120 V AC 230 V AC permissible range, lower limit (AC) permissible range, upper limit (AC) permissible frequency range, lower limit permissible frequency range, upper limit Load voltage L+ Rated value (DC) permissible range, lower limit (DC) permissible range, upper limit (DC) Current consumption Current consumption (rated value) Current consumption, max. Inrush current, max. Current output to backplane bus (DC 5 V), max. Power losses Power loss, typ. 60 mA at 120 V AC; 30 mA at 240 V AC 180 mA at 120 V AC; 90 mA at 240 V AC 20 A; At 264 V 750 mA; Max. 5 V DC for SM and CM 10 W CPU 1211C AC/DC/Relay STEP 7 V10.5 or higher 6ES7 211-1HD30-0XB0 CPU 1211C DC/DC/Relay STEP 7 V10.5 or higher 6ES7 211-1AD30-0XB0 CPU 1211C DC/DC/DC STEP 7 V10.5 or higher
Yes 20.4 V 28.8 V Yes Yes 85 V 264 V 47 Hz 63 Hz
Yes 20.4 V 28.8 V
24 V 20.4 V 28.8 V 300 mA; Typical 0.9 A; 24 V DC 12 A; at 28.8 V DC 750 mA; Max. 5 V DC for SM and CM 8W
24 V 20.4 V 28.8 V 300 mA; Typical 0.9 A; 24 V DC 12 A; at 28.8 V DC 750 mA; Max. 5 V DC for SM and CM 8W
4/4
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1211C

6ES7 211-1BD30-0XB0 Memory Usable memory for user data Work memory integrated expandable Load memory integrated expandable, max. Backup present without battery CPU-blocks Number of blocks (total) 25 kbyte 25 kbyte No 1 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte 6ES7 211-1HD30-0XB0 25 kbyte 25 kbyte No 1 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte 6ES7 211-1AD30-0XB0 25 kbyte 25 kbyte No 1 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte
OB Number, max. CPU processing times for bit operations, min. for word operations, min. for floating point arithmetic, min. Data areas and their retentivity retentive data area in total (incl. times, counters, flags), max. Flag Number, max. Address area I/O address area I/O address area, overall Overall Outputs Process image Inputs, adjustable Outputs, adjustable Digital channels Integrated channels (DI) Integrated channels (DO) Analog channels Integrated channels (AI) Integrated channels (AO)
4 kbyte; Size of bit memory address area
1024 byte for inputs / 1024 byte for outputs 1 024 byte 1 024 byte 1 kbyte 1 kbyte 6 4 2 0
Siemens ST 70 2011
4/5
Siemens AG 2011
SIMATIC S7-1200
CPU 1211C

6ES7 211-1BD30-0XB0 Hardware configuration Number of modules per system, max. Time Clock Hardware clock (real-time clock) Backup time Deviation per day, max. 3 communication modules, 1 signal board 6ES7 211-1HD30-0XB0 3 communication modules, 1 signal board 6ES7 211-1AD30-0XB0 3 communication modules, 1 signal board
Yes 240 h; typical +/- 60s/month at 25C
Test commissioning functions Status/control Status/control variable Variables Forcing Forcing Communication functions S7 communication supported as server Web server supported User-defined websites Open IE communication TCP/IP ISO-on-TCP (RFC1006) Number of connections overall 1st interface Type of interface Physics Isolated Automatic detection of transmission speed Autonegotiation Autocrossing Functionality PROFINET IO controller Programming Configuration software STEP 7 Programming language LAD FBD SCL Cycle time monitoring adjustable
Yes Inputs/outputs, memory bit, DB, distributed I/Os, timers, counters Yes
Yes Yes Yes Yes Yes Yes 15; dynamically PROFINET Ethernet Yes Yes Yes Yes Yes
STEP 7 V10.5 or higher Yes Yes Yes Yes
4/6
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1211C

6ES7 211-1BD30-0XB0 Digital inputs Number of digital inputs of which, inputs usable for technological functions m/p-reading Input voltage Rated value, DC for signal "0" for signal "1" Input current for signal "1", typ. Input delay (for rated value of input voltage) for standard inputs - parameterizable - at "0" to "1", min. - at "0" to "1", max. for interrupt inputs - parameterizable for counter/technological functions - parameterizable Cable length Cable length, shielded, max. Cable length unshielded, max. Digital outputs Number of digital outputs of which high-speed outputs Short-circuit protection Limitation of inductive shutdown voltage to Switching capacity of the outputs with resistive load, max. on lamp load, max. Output voltage for signal "0" (DC), max. for signal "1", min. Output current for signal "1" rated value for signal "0" residual current, max. Output delay with resistive load 0 to "1", max. 1 to "0", max. Parallel switching of 2 outputs for increased power Switching frequency of the pulse outputs, with resistive load, max. Cable length Cable length, shielded, max. Cable length unshielded, max. 10 ms; max. 10 ms; max. No 1 Hz 10 ms; max. 10 ms; max. No 1 Hz 100 kHz 2A 30 W DC; 200 W AC 2A 30 W DC; 200 W AC 6; Integrated 3; HSC (High Speed Counting) Yes 24 V 6ES7 211-1HD30-0XB0 6; Integrated 3; HSC (High Speed Counting) Yes 24 V 6ES7 211-1AD30-0XB0 6; Integrated 3; HSC (High Speed Counting) Yes 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA
1 mA
1 mA
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in 4 groups 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz, differential: 3 at 80 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 4 No; to be provided externally
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in 4 groups 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz, differential: 3 at 80 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 4 No; to be provided externally
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz, differential: 3 at 80 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 4 2; 100 kHz Pulse Train Output No; to be provided externally L+ (-48 V)
0.5 A 5W 0.1 V; with 10 kOhm load 20 V 0.5 A 0.1 mA 1 s; max. 5 s; max.
500 m 150 m
500 m 150 m
500 m 150 m
Siemens ST 70 2011
4/7
Siemens AG 2011
SIMATIC S7-1200
CPU 1211C

6ES7 211-1BD30-0XB0 Relay outputs Number of relay outputs Number of operating cycles Analog inputs Number of analog inputs Number of analog inputs for voltage/ current measurement 4 mechanically 10 million, at rated load voltage 100,000 2 2 100 m; twisted and shielded Yes Yes t100 kOhm 6ES7 211-1HD30-0XB0 4 mechanically 10 million, at rated load voltage 100,000 2 2 100 m; twisted and shielded Yes Yes t100 kOhm 100 m; twisted and shielded Yes Yes t100 kOhm 2 6ES7 211-1AD30-0XB0
Cable length, shielded, max. Input ranges Voltage Input ranges (rated values), voltages 0 to +10 V Input resistance (0 to 10 V) Analog outputs Cable length Cable length, shielded, max. Analog value creation Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Conversion time (per channel) Encoder supply 24 V encoder supply 24 V Encoder Connectable encoders 2-wire BEROS Integrated Functions Number of counters Counter frequency (counter) max. Frequency meter Controlled positioning PID controller Number of alarm inputs Number of pulse outputs Limit frequency (pulse) Operator control and monitoring Display Integrated
100 m; Shielded, twisted wire pair
10 bit Yes 625 s
10 bit Yes 625 s
10 bit Yes 625 s
permissible range: 20.4 to 28.8 V
Yes 3 100 kHz Yes Yes Yes 4
Yes 3 100 kHz Yes Yes Yes 4 2 100 kHz
No
No
No
4/8
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1211C

6ES7 211-1BD30-0XB0 Galvanic isolation Galvanic isolation digital inputs Galvanic isolation digital inputs Between the channels, in groups of Galvanic isolation digital outputs Galvanic isolation digital outputs Between the channels Between the channels, in groups of Permissible potential difference Between different circuits EMC Interference immunity against discharge of static electricity Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 - Test voltage at air discharge - Test voltage at contact discharge Interference immunity to cable-borne interference on the supply lines acc. to IEC 61000-4-4 Interference immunity on signal lines acc. to IEC 61000-4-4 Surge immunity on the supply lines acc. to IEC 61000-4-5 Immunity against conducted interference induced by high-frequency fields Interference immunity against high-frequency radiation acc. to IEC 61000-4-6 Emission of radio interference acc. to EN 55 011 Emission of radio interferences acc. to EN 55 011 (limit value class A) Emission of radio interference acc. to EN 55 011 (limit value class B) Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Relative humidity - Permissible range (without condensation) at 25 C 6ES7 211-1HD30-0XB0 6ES7 211-1AD30-0XB0
No 1 Yes; Relays No 1 500 V DC between 24 V DC and 5 V DC
No 1 Relays No 1 500 V DC between 24 V DC and 5 V DC
No 1 Yes No 1 500 V DC between 24 V DC and 5 V DC
Yes 8 kV 6 kV
Yes 8 kV 6 kV
Yes 8 kV 6 kV
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes; Group 1 Yes
Yes; Group 1 Yes
Yes; Group 1 Yes
0.3 m; five times, in dispatch package -40 C to +70 C 95%
Siemens ST 70 2011
4/9
Siemens AG 2011
SIMATIC S7-1200
CPU 1211C

6ES7 211-1BD30-0XB0 Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range - Permissible temperature change Air pressure acc. to IEC 60068-2-13 - Permissible air pressure - Permissible operating height Pollutant concentrations - SO2 at RH < 60% without condensation Environmental requirements Operating temperature Min. Max. Vertical installation, min. Vertical installation, max. Horizontal installation, min. Horizontal installation, max. Storage/transport temperature Min. Max. Air pressure Operation, min. Operation, max. Storage/transport, min. Storage/transport, max. Relative humidity Operation, max. Vibrations Vibrations Operation, checked according to IEC 60068-2-6 Shock test checked according to IEC 60068-2-27 6ES7 211-1HD30-0XB0 6ES7 211-1AD30-0XB0
0C to 55C horizontal mounting, 0C to 45C vertical mounting 5 C to 55, 3 C/minute 1080 to 795 hPa -1000 to 2000 m S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
0C to 55C horizontal mounting, 0C to 45C vertical mounting 5C to 55C, 3C / minute 1080 to 795 hPa -1000 to 2000 m S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
0 C 55 C 0 C 45 C 0 C 55 C -40 C 70 C 795 hPa 1 080 hPa 660 hPa 1 080 hPa 95 %; no condensation 2G wall mounting, 1G DIN rail Yes
Yes; IEC 68, Part 2-27 half-sine: Strength of the shock 15 g (peak value), duration 11 ms Yes Yes Yes Yes Yes
Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK cULus FM approval Dimensions and weight Dimensions Width Height Depth Weight Weight, approx.
90 mm 100 mm 75 mm 420 g
90 mm 100 mm 75 mm 380 g
90 mm 100 mm 75 mm 370 g
4/10
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1211C
Ordering data
CPU 1211C
I Compact CPU, AC/DC/relay; integral program/data memory 25 KB, load memory 1 MB; wide-range power supply 85 ... 264 V AC; Boolean execution times 0.1 Ps per operation; 6 digital inputs, 4 digital outputs (relays), 2 analog inputs; expandable by up to 3 communication modules and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz I Compact CPU, DC/DC/DC; integrated program/data memory 25 KB, load memory 1 MB; power supply 24 V DC; Boolean execution times 0.1 Ps per operation; 6 digital inputs, 4 digital outputs, 2 analog inputs; expandable by up to 3 communication modules and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz, 24 V DC digital outputs can be used as pulse outputs (PTO) or pulse-width modulated outputs (PWM) at 100 kHz I Compact CPU, DC/DC/relay; integrated program/data memory 25 KB, load memory 1 MB; power supply 24 V DC; Boolean execution times 0.1 Ps per operation; 6 digital inputs, 4 digital outputs (relays), 2 analog inputs; expandable by up to 3 communication modules and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz
Order No. SB 1223 signal board 6ES7 211-1BD30-0XB0 2 inputs, 24 V DC, IEC type 1 active high; 2 24 V DC transistor outputs, 0.5 A, 5 W; can be used as HSC at up to 30 kHz
I
Order No.
6ES7 223-0BD30-0XB0
I 2 inputs, 5 V DC, 200 kHz 2 outputs 5 V DC, 0.1 A, 200 kHz I 2 inputs, 24 V DC, 200 kHz 2 outputs 24 V DC, 0.1 A, 200 kHz
6ES7 223-3AD30-0XB0 6ES7 223-3BD30-0XB0 6ES7 231-4HA30-0XB0
SB 1231 signal board 1 analog input, 10 V with 12 bit or 0 ... 20 mA with 11 bit 6ES7 211-1AD30-0XB0 SB 1231 thermocouple signal board 1 input +/- 80 mV, resolution 15 bit + sign, thermocouples type J, K SB 1231 RTD signal board 1 input for resistance temperature sensors Pt 100, Pt 200, Pt 500, Pt 1000, resolution 15 bit + sign SB 1232 signal board 1 analog output, 10 V with 12 bit or 0 to 20 mA with 11 bit CB 1241 RS485 communication board 6ES7 211-1HD30-0XB0 for point-to-point connection, with 1 RS485 interface Simulator (optional)
6ES7 231-5QA30-0XB0
6ES7 231-5PA30-0XB0
6ES7 232-4HA30-0XB0
6ES7 241-1CH30-1XB0
8 input switches, for CPU 1211C / I CPU 1212C SIMATIC memory card (optional) 2 MB 24 MB Terminal block (spare part) for CPU 1211C/1212C For DI, with 14 screws, tin-plated; I 4 units For DO, with 8 screws, tin-plated; I 4 units For AI, with 3 screws, tin-plated; 4 units
I I I
6ES7 274-1XF30-0XA0
6ES7 954 -8LB01-0AA0 6ES7 954 -8LF01-0AA0
SB 1221 signal board 4 inputs, 5 V DC, 200 kHz 4 inputs, 24 V DC, 200 kHz SB 1222 signal board 4 outputs, 5 V DC, 0.1 A, 200 kHz I 4 outputs, 24 V DC, 0.1 A, 200 kHz
I I I
6ES7 221-3AD30-0XB0 6ES7 221-3BD30-0XB0 6ES7 222-1AD30-0XB0 6ES7 222-1BD30-0XB0
6ES7 292-1AH30-0XA0 6ES7 292-1AP30-0XA0 6ES7 292-1BC30-0XA0
I: Subject to export regulations AL: N and ECCN: EAR99H
Siemens ST 70 2011
4/11
Siemens AG 2011
SIMATIC S7-1200
CPU 1211C
Ordering data
Front flap set (spare part) for CPU 1211C/1212C S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French
K K K K K K
Order No. STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
D STEP 7 Basic Software Update Service, 1 year
Order No.
6ES7 291-1AA30-0XA0
6ES7 298-8FA30-8AH0 6ES7 298-8FA30-8BH0 6ES7 298-8FA30-8CH0 6ES7 298-8FA30-8DH0 6ES7 298-8FA30-8EH0 6ES7 298-8FA30-8KH0
Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
K K K K K K
6ES7 298-8FA30-8AQ0 6ES7 298-8FA30-8BQ0 6ES7 298-8FA30-8CQ0 6ES7 298-8FA30-8DQ0 6ES7 298-8FA30-8EQ0 6ES7 298-8FA30-8KQ0
6ES7 822-0AA01-0YA0 6ES7 822-0AA01-0YE0 6ES7 822-1AA01-0YC5
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
D: Subject to export regulations AL: N and ECCN: 5D992 K: Subject to export regulations AL: N and ECCN: EAR99T
4/12
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C
Overview
The superior compact solution With 14 integral input/outputs Expandable by: - 1 signal board (SB) or communication board (CB) - 2 signal modules (SM) - Max. 3 communication modules (CM)
6ES7 212-1BD30-0XB0 Product type designation Product version associated programming package Supply voltages Rated value 24 V DC Permissible range, lower limit (DC) Permissible range, upper limit (DC) 120 V AC 230 V AC Permissible range, lower limit (AC) Permissible range, upper limit (AC) Permissible frequency range, lower limit Permissible frequency range, upper limit Load voltage L+ Rated value (DC) Permissible range, lower limit (DC) Permissible range, upper limit (DC) Current consumption Current consumption (rated value) Current consumption, max. Inrush current, max. Current output to backplane bus (DC 5 V), max. Power losses Power loss, typ. CPU 1212C AC/DC/Relay STEP 7 V10.5 or higher 6ES7 212-1AD30-0XB0 CPU 1212C DC/DC/DC STEP 7 V10.5 or higher 6ES7 212-1HD30-0XB0 CPU 1212C DC/DC/Relay STEP 7 V10.5 or higher
Yes 20.4 V 28.8 V
24 V 5V 250 V 80 mA at 120 V AC; 40 mA at 240 V AC 240 mA at 120 V AC; 120 mA at 240 V AC 20 A; at 264 V 1 000 mA; max. 5 V DC for SM and CM 11 W
24 V 20.4 V 28.8 V
24 V 5V 250 V 175 mA; typical
1.2 A; 24 V DC 12 A; at 28.8 V DC 1 000 mA; max. 5 V DC for SM and CM 9W
1.2 A; 24 V DC 12 A; at 28.8 V DC 1 000 mA; max. 5 V DC for SM and CM 9W
Siemens ST 70 2011
4/13
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C

6ES7 212-1BD30-0XB0 Memory Usable memory for user data Work memory integrated expandable Load memory integrated expandable, max. 25 kbyte 25 kbyte No 1 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte 6ES7 212-1AD30-0XB0 25 kbyte 25 kbyte No 1 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte 6ES7 212-1HD30-0XB0 25 kbyte 25 kbyte No 1 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte
Backup present without battery CPU-blocks Number of blocks (total)
OB Number, max. CPU processing times for bit operations, min. for word operations, min. for floating point arithmetic, min. Data areas and their retentivity retentive data area in total (incl. times, counters, flags), max. Flag Number, max. Address area I/O address area I/O address area, overall Overall Outputs Process image Inputs, adjustable Outputs, adjustable Digital channels Integrated channels (DI) Integrated channels (DO) Analog channels Integrated channels (AI) Integrated channels (AO)
4/14
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C

6ES7 212-1BD30-0XB0 Hardware configuration Number of modules per system, max. Time Clock Hardware clock (real-time clock) Backup time Deviation per day, max. Test commissioning functions Status/control Status/control variable Variables Forcing Forcing Communication functions S7 communication Supported As server Web server Supported User-defined websites Open IE communication TCP/IP ISO-on-TCP (RFC1006) Number of connections overall 1st interface Type of interface Physics Isolated Automatic detection of transmission speed Autonegotiation Autocrossing Functionality PROFINET IO controller Programming Configuration software STEP 7 Programming language LAD FBD SCL Cycle time monitoring adjustable 3 comm. modules, 1 signal board, 2 signal modules 6ES7 212-1AD30-0XB0 3 comm. modules, 1 signal board, 2 signal modules 6ES7 212-1HD30-0XB0 3 comm. modules, 1 signal board, 2 signal modules
Siemens ST 70 2011
4/15
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C

6ES7 212-1BD30-0XB0 Digital inputs Number of digital inputs of which, inputs usable for technological functions m/p-reading Input voltage Rated value, DC for signal "0" for signal "1" Input current for signal "1", typ. Input delay (for rated value of input voltage) for standard inputs - parameterizable - at "0" to "1", min. - at "0" to "1", max. for interrupt inputs - parameterizable for counter/technological functions - parameterizable 8; Integrated 4; HSC (High Speed Counting) Yes 24 V 6ES7 212-1AD30-0XB0 8; Integrated 4; HSC (High Speed Counting) Yes 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 6ES7 212-1HD30-0XB0 8; Integrated 4; HSC (High Speed Counting) Yes 24 V
1 mA
1 mA
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 1 at 30 kHz, differential: 3 at 80 kHz & 1 at 30 kHz 500 m; 50 m for technological functions 300 m; for technological functions: No 6 No; to be provided externally
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 1 with 30 kHz, differential: 3 at 80 kHz & 1 at 30 kHz 500 m; 50 m for technological functions 300 m; for technological functions: No 6 2; 100 kHz Pulse Train Output No; to be provided externally L+ (-48 V)
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 1 at 30 kHz, differential: 3 at 80 kHz & 1 at 30 kHz 500 m; 50 m for technological functions 300 m; for technological functions: No 6 No; to be provided externally
Cable length Cable length, shielded, max. Cable length unshielded, max. Digital outputs Number of digital outputs of which high-speed outputs Short-circuit protection Limitation of inductive shutdown voltage to Switching capacity of the outputs with resistive load, max. on lamp load, max. Output voltage for signal "0" (DC), max. for signal "1", min. Output current for signal "1" rated value for signal "0" residual current, max. Output delay with resistive load 0 to "1", max. 1 to "0", max. Switching frequency of the pulse outputs, with resistive load, max. Cable length Cable length, shielded, max. Cable length unshielded, max.
2A 30 W DC; 200 W AC
0.5 A 5W 0.1 V; with 10 kOhm load 20 V 0.5 A 0.1 mA
2A 30 W DC; 200 W AC
10 ms; max. 10 ms; max. 1 Hz
1 s 5 s 100 kHz
500 m 150 m
500 m 150 m
500 m 150 m
4/16
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C

6ES7 212-1BD30-0XB0 Relay outputs Number of relay outputs Number of operating cycles Analog inputs Number of analog inputs Cable length, shielded, max. Input ranges Voltage Input ranges (rated values), voltages 0 to +10 V Input resistance (0 to 10 V) Analog outputs Cable length Cable length, shielded, max. Analog value creation Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Conversion time (per channel) Encoder supply 24 V encoder supply 24 V Encoder Connectable encoders 2-wire BEROS Integrated Functions Number of counters Counter frequency (counter) max. Frequency meter Controlled positioning PID controller Number of alarm inputs Number of pulse outputs Limit frequency (pulse) Operator control and monitoring Display Integrated 6 mechanically 10 million, at rated load voltage 100,000 2 100 m; twisted and shielded Yes Yes t100 kOhm 2 100 m; twisted and shielded Yes Yes t100 kOhm 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0 6 mechanically 10 million, at rated load voltage 100,000 2 100 m; twisted and shielded Yes Yes t100 kOhm
10 bit Yes 625 s
10 bit Yes 625 s
10 bit Yes 625 s
No
No
No
Galvanic isolation Galvanic isolation digital inputs Galvanic isolation digital inputs No Between the channels, in groups of 1 Galvanic isolation digital outputs Galvanic isolation digital outputs Yes; Relays No Between the channels Between the channels, in groups of 2
No 1 Yes No 2
No 1 Relays No 1
Siemens ST 70 2011
4/17
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C

6ES7 212-1BD30-0XB0 Permissible potential difference between different circuits EMC Interference immunity against discharge of static electricity Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 - Test voltage at air discharge - Test voltage at contact discharge Interference immunity to cable-borne interference on the supply lines acc. to IEC 61000-4-4 Interference immunity on signal lines acc. to IEC 61000-4-4 Surge immunity on the supply lines acc. to IEC 61000-4-5 500 V DC between 24 V DC and 5 V DC 6ES7 212-1AD30-0XB0 500 V DC between 24 V DC and 5 V DC 6ES7 212-1HD30-0XB0 500 V DC between 24 V DC and 5 V DC
Yes 8 kV 6 kV
Yes 8 kV 6 kV
Yes 8 kV 6 kV
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes
Immunity against conducted interference induced by high-frequency fields Interference immunity against high- Yes frequency radiation acc. to IEC 61000-4-6 Emission of radio interference acc. to EN 55 011 Emission of radio interferences acc. to EN 55 011 (limit value class A) Emission of radio interference acc. to EN 55 011 (limit value class B) Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range - permissible temperature change Air pressure acc. to IEC 60068-2-13 - Permissible air pressure - Permissible operating height Pollutant concentrations - SO2 at RH < 60% without condensation
Yes
Yes
Yes; Group 1 Yes
Yes; Group 1 Yes
Yes; Group 1 Yes
4/18
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C

6ES7 212-1BD30-0XB0 Environmental requirements Operating temperature Min. Max. Vertical installation, min. Vertical installation, max. Horizontal installation, min. Horizontal installation, max. Storage/transport temperature Min. Max. Air pressure Operation, min. Operation, max. Storage/transport, min. Storage/transport, max. Relative humidity Operation, max. Vibrations Vibrations Operation, checked according to IEC 60068-2-6 Shock test checked according to IEC 60068-2-27 Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK cULus FM approval Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0
90 mm 100 mm 75 mm 425 g
90 mm 100 mm 75 mm 370 g
90 mm 100 mm 75 mm 385 g
Siemens ST 70 2011
4/19
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C
Ordering data
CPU 1212C
I Compact CPU, AC/DC/relay; integral program/data memory 25 KB, load memory 1 MB; wide-range power supply 85 ... 264 V AC; Boolean execution times 0.1 Ps per operation; 8 digital inputs, 6 digital outputs (relays), 2 analog inputs; expandable by up to 3 communication modules, 2 signal modules and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz I Compact CPU, DC/DC/DC; integrated program/data memory 25 KB, load memory 1 MB; power supply 24 V DC; Boolean execution times 0.1 Ps per operation; 8 digital inputs, 6 digital outputs, 2 analog inputs; expandable by up to 3 communication modules, 2 signal modules, and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz, 24 V DC digital outputs can be used as pulse outputs (PTO) or pulse-width modulated outputs (PWM) at 100 kHz I Compact CPU, DC/DC/relay; integrated program/data memory 25 KB, load memory 2 MB; power supply 24 V DC; Boolean execution times 0.1 Ps per operation; 8 digital inputs, 6 digital outputs (relays), 2 analog inputs; expandable by up to 3 communication modules, 2 signal modules, and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz
Order No. SB 1223 signal board 6ES7 212-1BD30-0XB0 2 inputs, 24 V DC, IEC type 1 active high; 2 24 V DC transistor outputs, 0.5 A, 5 W; can be used as HSC at up to 30 kHz
I
Order No.
6ES7 223-0BD30-0XB0
SB 1231 signal board 1 analog input, 10 V with 12 bit or 0 ... 20 mA with 11 bit 6ES7 212-1AD30-0XB0 SB 1231 thermocouple signal board 1 input +/- 80 mV, resolution 15 bit + sign, thermocouples type J, K SB 1231 RTD signal board 1 input for resistance temperature sensors Pt 100, Pt 200, Pt 500, Pt 1000, resolution 15 bit + sign SB 1232 signal board 1 analog output, 10 V with 12 bit or 0 to 20 mA with 11 bit CB 1241 RS485 communication board 6ES7 212-1HD30-0XB0 for point-to-point connection, with 1 RS485 interface Simulator (optional)
6ES7 231-5QA30-0XB0
6ES7 231-5PA30-0XB0
6ES7 232-4HA30-0XB0
6ES7 241-1CH30-1XB0
8 input switches, for CPU 1211C / I CPU 1212C SIMATIC Memory Card (optional) 2 MB 24 MB Extension cable for two-tier configuration 6ES7 221-3AD30-0XB0 6ES7 221-3BD30-0XB0 6ES7 222-1AD30-0XB0 6ES7 222-1BD30-0XB0 for connecting digital/analog signal modules; length 2 m Starter box CPU 1212C AC/DC/ D relay Complete offer SIMATIC S7-1200, starter box, comprising: CPU 1212C AC/DC/relay, simulator, STEP 7 BASIC CD, manual CD, info material, in Systainer
I I I
6ES7 274-1XF30-0XA0
6ES7 954 -8LB01-0AA0 6ES7 954 -8LF01-0AA0 6ES7 290-6AA30-0XA0
I I I
6ES7 212-1BD30-4YB0
D: Subject to export regulations AL: N and ECCN: 5D992 I: Subject to export regulations AL: N and ECCN: EAR99H
4/20
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1212C
Ordering data
Terminal block (spare part) for CPU 1211C/1212C For DI, with 14 screws, tin-plated; I 4 units For DO, with 8 screws, tin-plated; I 4 units For AI, with 3 screws, tin-plated; 4 units Front flap set (spare part) for CPU 1211C/1212C S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
K K K K K K K K K K K K I
Order No. STEP 7 Basic V11 engineering software 6ES7 292-1AH30-0XA0 6ES7 292-1AP30-0XA0 6ES7 292-1BC30-0XA0 Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license STEP 7 Basic Software Update Service, 1 year 6ES7 298-8FA30-8AQ0 6ES7 298-8FA30-8BQ0 6ES7 298-8FA30-8CQ0 6ES7 298-8FA30-8DQ0 6ES7 298-8FA30-8EQ0 6ES7 298-8FA30-8KQ0
D
Order No.
6ES7 291-1AA30-0XA0
6ES7 822-0AA01-0YA0 6ES7 822-0AA01-0YE0 6ES7 822-1AA01-0YC5 6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
D: Subject to export regulations AL: N and ECCN: 5D992 I: Subject to export regulations AL: N and ECCN: EAR99H K: Subject to export regulations AL: N and ECCN: EAR99T
Siemens ST 70 2011
4/21
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C
Overview
The compact high-performance CPU With 24 integral input/outputs Expandable by: - 1 signal board (SB) or communication board (CB) - 8 signal modules (SM) - Max. 3 communication modules (CM)
6ES7 214-1BE30-0XB0 Product type designation Product version associated programming package Supply voltages Rated value 24 V DC permissible range, lower limit (DC) permissible range, upper limit (DC) 120 V AC 230 V AC permissible range, lower limit (AC) permissible range, upper limit (AC) permissible frequency range, lower limit permissible frequency range, upper limit Load voltage L+ Rated value (DC) permissible range, lower limit (DC) permissible range, upper limit (DC) Current consumption Current consumption (rated value) Current consumption, max. Inrush current, max. Current output to backplane bus (DC 5 V), max. Power losses Power loss, typ. CPU 1214C AC/DC/Relay STEP 7 V10.5 or higher 6ES7 214-1AE30-0XB0 CPU 1214C DC/DC/DC STEP 7 V10.5 or higher 6ES7 214-1HE30-0XB0 CPU 1214C DC/DC/Relay STEP 7 V10.5 or higher
Yes 20.4 V 28.8 V
24 V 5V 250 V 100 mA at 120 V AC; 50 mA at 240 V AC 300 mA at 120 V AC; 150 mA at 240 V AC 20 A; At 264 V 1 600 mA; Max. 5 V DC for SM and CM 14 W
24 V 20.4 V 28.8 V
24 V 5V 250 V 500 mA; Typical
1.5 A; 24 V DC 12 A; at 28.8 V DC 1 600 mA; Max. 5 V DC for SM and CM 12 W
1.2 A; 24 V DC 12 A; at 28.8 V DC 1 600 mA; Max. 5 V DC for SM and CM 12 W
4/22
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C

6ES7 214-1BE30-0XB0 Memory Usable memory for user data Work memory integrated expandable Load memory integrated expandable, max. Backup present without battery CPU-blocks Number of blocks (total) 50 kbyte 50 kbyte No 2 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte 6ES7 214-1AE30-0XB0 50 kbyte 50 kbyte No 2 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte 6ES7 214-1HE30-0XB0 50 kbyte 50 kbyte No 2 Mbyte 24 Mbyte; with SIMATIC memory card Yes; entire project maintenancefree in the integral EEPROM Yes DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 0.1 s; / Operation 12 s; / Operation 18 s; / Operation 2 048 byte
OB Number, max. CPU processing times for bit operations, min. for word operations, min. for floating point arithmetic, min. Data areas and their retentivity retentive data area in total (incl. times, counters, flags), max. Flag Number, max. Address area I/O address area I/O address area, overall overall Outputs Process image Inputs, adjustable Outputs, adjustable Digital channels integrated channels (DI) integrated channels (DO) Analog channels Integrated channels (AI) Integrated channels (AO) Hardware configuration Number of modules per system, max.
1024 byte for inputs / 1024 byte for outputs 1 024 byte 1 024 byte 1 kbyte 1 kbyte 14 10 2 0 3 comm. modules, 1 signal board, 8 signal modules
Siemens ST 70 2011
4/23
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C

6ES7 214-1BE30-0XB0 Time Clock Hardware clock (real-time clock) Backup time Deviation per day, max. Test commissioning functions Status/control Status/control variable Variables Forcing Forcing Communication functions S7 communication supported as server Web server supported user-defined websites Open IE communication TCP/IP ISO-on-TCP (RFC1006) Number of connections overall 1st interface Type of interface Physics Isolated Automatic detection of transmission speed Autonegotiation Autocrossing Functionality PROFINET IO controller Programming Configuration software STEP 7 Programming language LAD FBD SCL Cycle time monitoring adjustable 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0
4/24
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C

6ES7 214-1BE30-0XB0 Digital inputs Number of digital inputs of which, inputs usable for technological functions m/p-reading Input voltage Rated value, DC for signal "0" for signal "1" Input current for signal "1", typ. Input delay (for rated value of input voltage) for standard inputs - parameterizable - at "0" to "1", min. - at "0" to "1", max. for interrupt inputs - parameterizable for counter/technological functions - parameterizable 14; Integrated 6; HSC (High Speed Counting) Yes 24 V 6ES7 214-1AE30-0XB0 14; Integrated 6; HSC (High Speed Counting) Yes 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 6ES7 214-1HE30-0XB0 14; Integrated 6; HSC (High Speed Counting) Yes 24 V
1 mA
1 mA
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 1 at 30 kHz, differential: 3 at 80 kHz & 1 at 30 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 10 No; to be provided externally
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 1 at 30 kHz, differential: 3 at 80 kHz & 1 at 30 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 10 2; 100 kHz Pulse Train Output No; to be provided externally L+ (-48 V)
0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz 500 m; 50 m for technological functions 300 m; For technological functions: No 10 No; to be provided externally
Cable length Cable length, shielded, max. Cable length unshielded, max. Digital outputs Number of digital outputs of which high-speed outputs Short-circuit protection Limitation of inductive shutdown voltage to Switching capacity of the outputs with resistive load, max. on lamp load, max. Output voltage for signal "1", min. Output current for signal "1" rated value for signal "0" residual current, max. Output delay with resistive load 0 to "1", max. 1 to "0", max. Switching frequency of the pulse outputs, with resistive load, max. Cable length Cable length, shielded, max. Cable length unshielded, max.
2A 30 W DC; 200 W AC
0.5 A 5W 20 V 0.5 A 0.1 mA
2A 30 W DC; 200 W AC
1 s 5 s 100 kHz
500 m 150 m
500 m 150 m
500 m 150 m
Siemens ST 70 2011
4/25
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C

6ES7 214-1BE30-0XB0 Relay outputs Number of relay outputs Number of operating cycles Analog inputs Number of analog inputs Cable length, shielded, max. Input ranges Voltage Input ranges (rated values), voltages 0 to +10 V Input resistance (0 to 10 V) Analog outputs Cable length Cable length, shielded, max. Analog value creation Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Conversion time (per channel) Encoder supply 24 V encoder supply 24 V Encoder Connectable encoders 2-wire BEROS Integrated Functions Number of counters Counter frequency (counter) max. Frequency meter controlled positioning PID controller Number of alarm inputs Number of pulse outputs Limit frequency (pulse) Operator control and monitoring Display Integrated Galvanic isolation Galvanic isolation digital inputs Galvanic isolation digital inputs between the channels, in groups of Galvanic isolation digital outputs Galvanic isolation digital outputs between the channels between the channels, in groups of 10 mechanically 10 million, at rated load voltage 100,000 2 100 m; twisted and shielded Yes Yes t100 kOhm 2 100 m; twisted and shielded Yes Yes t100 kOhm 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0 10 mechanically 10 million, at rated load voltage 100,000 2 100 m; twisted and shielded Yes Yes t100 kOhm
10 bit Yes 625 s
10 bit Yes 625 s
10 bit Yes 625 s
No
No
No
No 1 Yes; Relays No 2
No 1 Yes No 2
No 1 Relays No 1
4/26
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C

6ES7 214-1BE30-0XB0 Permissible potential difference between different circuits EMC Interference immunity against discharge of static electricity Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 - Test voltage at air discharge - Test voltage at contact discharge Interference immunity to cable-borne interference on the supply lines acc. to IEC 61000-4-4 Interference immunity on signal lines acc. to IEC 61000-4-4 Surge immunity on the supply lines acc. to IEC 61000-4-5 500 V DC between 24 V DC and 5 V DC 6ES7 214-1AE30-0XB0 500 V DC between 24 V DC and 5 V DC 6ES7 214-1HE30-0XB0 500 V DC between 24 V DC and 5 V DC
Yes 8 kV 6 kV
Yes 8 kV 6 kV
Yes 8 kV 6 kV
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes
Immunity against conducted interference induced by high-frequency fields Interference immunity against high- Yes frequency radiation acc. to IEC 61000-4-6 Emission of radio interference acc. to EN 55 011 Emission of radio interferences acc. to EN 55 011 (limit value class A) Emission of radio interference acc. to EN 55 011 (limit value class B) Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Relative humidity - Permissible range (without condensation) at 25 C
Yes
Yes
Yes; Group 1 Yes
Yes; Group 1 Yes
Yes; Group 1 Yes
Siemens ST 70 2011
4/27
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C

6ES7 214-1BE30-0XB0 Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range - Permissible temperature change Air pressure acc. to IEC 60068-2-13 - Permissible air pressure - Permissible operating height Pollutant concentrations - SO2 at RH < 60% without condensation Environmental requirements Operating temperature Min. Max. Vertical installation, min. Vertical installation, max. Horizontal installation, min. Horizontal installation, max. Storage/transport temperature Min. Max. Air pressure Operation, min. Operation, max. Storage/transport, min. Storage/transport, max. Relative humidity Operation, max. Vibrations Vibrations Operation, checked according to IEC 60068-2-6 Shock test checked according to IEC 60068-2-27 Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK cULus FM approval Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0
5C to 55C, 3C / minute 1080 to 795 hPa -1000 to 2000 m S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
110 mm 100 mm 75 mm 455 g
110 mm 100 mm 75 mm 415 g
110 mm 100 mm 75 mm 435 g
4/28
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C
Ordering data
CPU 1214C Compact CPU, AC/DC/relay; integral program/data memory 50 KB, load memory 2 MB; wide-range power supply 85 ... 264 V AC; Boolean execution times 0.1 Ps per operation; 14 digital inputs, 10 digital outputs (relays), 2 analog inputs; expandable by up to 3 communication modules, 8 signal modules and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz
I
Order No. SB 1223 signal board 6ES7 214-1BE30-0XB0 2 inputs, 24 V DC, IEC type 1 active high; 2 24 V DC transistor outputs, 0.5 A, 5 W; can be used as HSC at up to 30 kHz
I
Order No.
6ES7 223-0BD30-0XB0
SB 1231 signal board 1 analog input, 10 V with 12 bit or 0 ... 20 mA with 11 bit 6ES7 214-1AE30-0XB0 SB 1231 thermocouple signal board 1 input +/- 80 mV, resolution 15 bit + sign, thermocouples type J, K SB 1231 RTD signal board 1 input for resistance temperature sensors Pt 100, Pt 200, Pt 500, Pt 1000, resolution 15 bit + sign SB 1232 signal board 1 analog output, 10 V with 12 bit or 0 to 20 mA with 11 bit CB 1241 RS485 communication board 6ES7 214-1HE30-0XB0 for point-to-point connection, with 1 RS485 interface Simulator (optional)
I Compact CPU, DC/DC/DC; integrated program/data memory 50 KB, load memory 2 MB; power supply 24 V DC; Boolean execution times 0.1 Ps per operation; 14 digital inputs, 10 digital outputs, 2 analog inputs; expandable by up to 3 communication modules, 8 signal modules, and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz, 24 V DC digital outputs can be used as pulse outputs (PTO) or pulse-width modulated outputs (PWM) at 100 kHz I Compact CPU, DC/DC/relay; integrated program/data memory 50 KB, load memory 2 MB; power supply 24 V DC; Boolean execution times 0.1 Ps per operation; 14 digital inputs, 10 digital outputs (relays), 2 analog inputs; expandable by up to 3 communication modules, 8 signal modules, and 1 signal board/communication board; digital inputs can be used as HSC at 100 kHz
6ES7 231-5QA30-0XB0
6ES7 231-5PA30-0XB0
6ES7 232-4HA30-0XB0
6ES7 241-1CH30-1XB0
14 input switches, for CPU 1214C I SIMATIC memory card (optional) 2 MB 24 MB Extension cable for two-tier configuration for connecting digital/analog signal modules; length 2 m Terminal block (spare part) for CPU 1214C 6ES7 222-1AD30-0XB0 6ES7 222-1BD30-0XB0 For DI, with 20 screws, tin-plated; I 4 units For DO, with 12 screws, tin-plated; 4 units For AI, with 3 screws, tin-plated; 4 units
I I I I I
6ES7 274-1XH30-0XA0
6ES7 954 -8LB01-0AA0 6ES7 954 -8LF01-0AA0 6ES7 290-6AA30-0XA0
I I I
6ES7 221-3AD30-0XB0 6ES7 221-3BD30-0XB0
6ES7 292-1AV30-0XA0 6ES7 292-1AM30-0XA0 6ES7 292-1BC30-0XA0
I: Subject to export regulations AL: N and ECCN: EAR99H
Siemens ST 70 2011
4/29
Siemens AG 2011
SIMATIC S7-1200
CPU 1214C
Ordering data
Front flap set (spare part) for CPU 1214C S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French
K K K K K K
Order No. STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license STEP 7 Basic Software Update Service, 1 year
D
Order No.
6ES7 291-1AB30-0XA0
Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
K K K K K K
6ES7 822-0AA01-0YA0 6ES7 822-0AA01-0YE0 6ES7 822-1AA01-0YC5 6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
D: Subject to export regulations AL: N and ECCN: 5D992 K: Subject to export regulations AL: N and ECCN: EAR99T
4/30
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS central processing units
SIPLUS CPU 1211C
Overview
The clever compact solution With 10 integrated I/Os Expandable with: - 1 signal board (SB) - Max. 3 communication modules (CM) Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS CPU 1211C DC/DC/DC Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 211-1AD30-2XB0 6ES7 211-1AD30-0XB0 -25 ... + 70 C3) 0 ... +55 C -25 ... + 55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 211-1AD30-4XB0 6AG1 211-1AD30-5XB0
SIPLUS CPU 1211C AC/DC/RLY Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 211-1BD30-2XB0 6ES7 211-1BD30-0XB0 -25 ... + 70 C3) 0 ... +55 C -25 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 211-1BD30-4XB0 6AG1 211-1BD30-5XB0
SIPLUS CPU 1211C DC/DC/RLY Order number Order No. based on Ambient temperature range Conformal coating Technical data
3)
6AG1 211-1HD30-2XB0 6ES7 211-1HD30-0XB0 -25 ... + 70 C3)
6AG1 211-1HD30-4XB0 0 ... +55 C
6AG1 211-1HD30-5XB0 -25 ... +55 C
Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions.
From +60 C to +70 C, the number of simultaneously enabled inputs and outputs is max. 50%; no SB module permitted
Siemens ST 70 2011
4/31
Siemens AG 2011
SIMATIC S7-1200
SIPLUS CPU 1211C
Overview (continued)
1)
Ambient conditions Relative humidity Biologically active substances 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust 2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K Order No.
2)
ISA-S71.04 severity level GX: Long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm Limit value (max. 30 min/d): SO2 < 17.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!
The technical documentation on SIPLUS can be found here: www.siemens.com/siplus-extreme
Ordering data
SIPLUS CPU 1211C compact CPU, AC/DC/relay (extended temperature range and medial exposure) Integrated program and data memory of 25 KB, load memory of 1 MB; wide-range alternating voltage supply 85 ... 264 V AC; Boolean execution times of 0.1 Ps per operation; 6 digital inputs, 4 digital outputs (relay), 2 analog inputs; expandable with up to 3 communication modules and 1 signal board; digital inputs usable as HSC with 100 kHz H Suitable for areas with extraordinary medial exposure (conformal coating) I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
Order No. SIPLUS CPU 1211C compact CPU, DC/DC/DC (extended temperature range and medial exposure) Integrated program and data memory of 25 KB, load memory of 1 MB; power supply 24 V DC; boolean execution times of 0.1 Ps per operation; 6 digital inputs, 4 digital outputs, 2 analog inputs; expandable with up to 3 communication modules and 1 signal board; digital inputs usable as HSC with 100 kHz, 24 V DC digital outputs usable as pulse outputs (PTO) or pulsewidth-modulated outputs (PWM) with 100 kHz H Suitable for areas with extraordinary medial exposure (conformal coating) I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used Suitable for areas with extraI ordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
6AG1 212-1BD30-4XB0 6AG1 212-1BD30-5XB0
6AG1 212-1AD30-4XB0 6AG1 212-1AD30-5XB0
6AG1 212-1BD30-2XB0
6AG1 212-1AD30-2XB0
H: Subject to export regulations AL: 9I999 and ECCN: EAR99H I: Subject to export regulations AL: N and ECCN: EAR99H
4/32
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS CPU 1211C
Ordering data
SIPLUS CPU 1211C compact CPU, DC/DC/relay (extended temperature range and medial exposure) Integrated program and data memory of 25 KB, load memory of 1 MB; power supply 24 V DC; Boolean execution times of 0.1 Ps per operation; 6 digital inputs, 4 digital outputs (relay), 2 analog inputs; expandable with up to 3 communication modules and 1 signal board; digital inputs usable as HSC with 100 kHz Suitable for areas with extraor- H dinary medial exposure (conformal coating) Suitable for areas with extraor- I dinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
Order No. Accessories
Order No. see SIMATIC S7-1200 CPU 1211C, page 4/11
4
6AG1 211-1HD30-4XB0 6AG1 211-1HD30-5XB0
6AG1 212-1HD30-2XB0
Siemens ST 70 2011
4/33
Siemens AG 2011
SIMATIC S7-1200
SIPLUS CPU 1212C
Overview
The superior compact solution With 14 integrated I/Os Expandable with: - 1 signal board (SB) - 2 signal modules (SM) - Max. 3 communication modules (CM) Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS CPU 1212C DC/DC/DC Order number Order number based on Ambient temperature range Conformal coating Technical data 6AG1 212-1AD30-2XB0 6ES7 212-1AD30-0XB0 -25 ... +70 C3) 0 ... +55 C -25 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 212-1AD30-4XB0 6AG1 212-1AD30-5XB0
SIPLUS CPU 1212C AC/DC/RLY Order number Order number based on Ambient temperature range Conformal coating Technical data 6AG1 212-1BD30-2XB0 6ES7 212-1BD30-0XB0 -25 ... +70 C3) 0 ... +55 C -25 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 212-1BD30-4XB0 6AG1 212-1BD30-5XB0
SIPLUS CPU 1212C DC/DC/RLY Order number Order number based on Ambient temperature range Conformal coating Technical data
3)
6AG1 212-1HD30-2XB0 6ES7 212-1HD30-0XB0 -25 ... +70 C3)
6AG1 212-1HD30-4XB0 0 ... +55 C
6AG1 212-1HD30-5XB0 -25 ... +55 C
4/34
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS CPU 1212C
1)
Ambient conditions Relative humidity Biologically active substances 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K Order No.
2)
Technical documentation on SIPLUS is available under: www.siemens.com/siplus-extreme
Ordering data
SIPLUS CPU 1212C compact CPU, AC/DC/relay (extended temperature range and medial exposure) Integrated program and data memory of 25 KB, load memory of 1 MB; wide-range alternating voltage supply 85 ... 264 V AC; Boolean execution times of 0.1 Ps per operation; 8 digital inputs, 6 digital outputs (relay), 2 analog inputs; expandable with up to 3 communication modules, 2 signal modules, and 1 signal board; digital inputs usable as HSC with 100 kHz H Suitable for areas with extraordinary medial exposure (conformal coating) I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
Order No. SIPLUS CPU 1212C compact CPU, DC/DC/DC (extended temperature range and medial exposure) Integrated program and data memory of 25 kbyte, load memory of 1 MB; power supply 24 V DC; Boolean execution times of 0.1 Ps per operation; 8 digital inputs, 6 digital outputs, 2 analog inputs; expandable with up to 3 communication modules, 2 signal modules and 1 signal board; digital inputs usable as HSC with 100 kHz; 24 V DC digital outputs usable as pulse outputs (PTO) or pulsewidth-modulated outputs (PWM) with 100 kHz H Suitable for areas with extraordinary medial exposure (conformal coating) I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
6AG1 212-1BD30-4XB0 6AG1 212-1BD30-5XB0
6AG1 212-1AD30-4XB0 6AG1 212-1AD30-5XB0
6AG1 212-1BD30-2XB0
6AG1 212-1AD30-2XB0
Siemens ST 70 2011
4/35
Siemens AG 2011
SIMATIC S7-1200
SIPLUS CPU 1212C
Ordering data
SIPLUS CPU 1212C compact CPU, DC/DC/relay (extended temperature range and medial exposure) Integrated program and data memory of 25 KB, load memory of 1 MB; power supply 24 V DC; Boolean execution times of 0.1 Ps per operation; 8 digital inputs, 6 digital outputs (relay), 2 analog inputs; expandable with up to 3 communication modules, 2 signal modules and 1 signal board; digital inputs usable as HSC with 100 kHz H Suitable for areas with extraordinary medial exposure (conformal coating) I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used I Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
Order No. See SIMATIC S7-1200 CPU 1212C, page 4/20
6AG1 212-1HD30-4XB0 6AG1 212-1HD30-5XB0
6AG1 212-1HD30-2XB0
4/36
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS CPU 1214C
Overview
The compact high-performance CPU With 24 integrated I/Os Expandable with: - 1 signal board (SB) - 8 signal modules (SM) - Max. 3 communication modules (CM) Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS CPU 1214C DC/DC/DC Order No. Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 214-1AE30-2XB0 6ES7 214-1AE30-0XB0 -25 ... +70 C3) 0 ... +55 C -25 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 214-1AE30-4XB0 6AG1 214-1AE30-5XB0
SIPLUS CPU 1214C AC/DC/RLY Order No. Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 214-1BE30-2XB0 6ES7 214-1BE30-0XB0 -25 ... +70 C3) 0 ... +55 C -25 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 214-1BE30-4XB0 6AG1 214-1BE30-5XB0
SIPLUS CPU 1214C DC/DC/RLY Order No. Order No. based on Ambient temperature range Conformal coating Technical data
3)
6AG1 214-1HE30-2XB0 6ES7 214-1HE30-0XB0 -25 ... +70 C3)
6AG1 214-1HE30-4XB0 0 ... +55 C
6AG1 214-1HE30-5XB0 -25 ... +55 C
Siemens ST 70 2011
4/37
Siemens AG 2011
SIMATIC S7-1200
SIPLUS CPU 1214C
1)
Ambient conditions Relative humidity Biologically active substances 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust 2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K Order No.
2)
Ordering data
SIPLUS CPU 1214C compact CPU, AC/DC/relay (extended temperature range and medial exposure) Integrated program and data memory of 50 kbyte, load memory of 2 MB; wide-range alternating voltage supply 85 ... 264 V AC; Boolean execution times of 0.1 Ps per operation; 14 digital inputs, 10 digital outputs (relay), 2 analog inputs; expandable with up to 3 communication modules, 8 signal modules, and 1 signal board; digital inputs usable as HSC with 100 kHz Suitable for areas with extraH ordinary medial exposure (conformal coating) Suitable for areas with extraI ordinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used Suitable for areas with extraH ordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
Order No. SIPLUS CPU 1214C compact CPU, DC/DC/DC (extended temperature range and medial exposure) Integrated program and data memory of 50 kbyte, load memory of 2 MB; voltage supply 24 V DC; Boolean execution times of 0.1 Ps per operation; 14 digital inputs, 10 digital outputs, 2 analog inputs; expandable with up to 3 communication modules, 8 signal modules and 1 signal board; digital inputs usable as HSC with 100 kHz; 24 V DC digital outputs usable as pulse outputs (PTO) or pulsewidth-modulated outputs (PWM) with 100 kHz Suitable for areas with extraH ordinary medial exposure (conformal coating) Suitable for areas with extraI ordinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used Suitable for areas with extraH ordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
6AG1 214-1BE30-4XB0 6AG1 214-1BE30-5XB0
6AG1 214-1AE30-4XB0 6AG1 214-1AE30-5XB0
6AG1 214-1BE30-2XB0
6AG1 214-1AE30-2XB0
4/38
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS CPU 1214C
Ordering data
SIPLUS CPU 1214C compact CPU, DC/DC/relay (extended temperature range and medial exposure) Integrated program and data memory of 50 KB, load memory of 2 MB; power supply 24 V DC; Boolean execution times of 0.1 Ps per operation; 14 digital inputs, 10 digital outputs (relay), 2 analog inputs; expandable with up to 3 communication modules, 8 signal modules and 1 signal board; digital inputs usable as HSC with 100 kHz Suitable for areas with extraH ordinary medial exposure (conformal coating) Suitable for areas with extraI ordinary medial exposure (conformal coating); ambient temperature -25 ... +55 C; without restrictions; SB module can be used Suitable for areas with extraH ordinary medial exposure (conformal coating); ambient temperature -25 ... +70 C; from +60 +70 C number of simultaneously controllable inputs and outputs max. 50%; no SB module possible
Order No. See SIMATIC S7-1200 CPU 1214C, page 4/29
4
6AG1 214-1HE30-4XB0 6AG1 214-1HE30-5XB0
6AG1 214-1HE30-2XB0
Siemens ST 70 2011
4/39
Siemens AG 2011
SIMATIC S7-1200
Digital modules
SM 1221 digital input module
Overview
Digital inputs as supplement to the integral I/O of the CPUs For flexible adaptation of the controller to the relevant task For subsequent expansion of the system with additional inputs
6ES7 221-1BF30-0XB0 Product type designation Supply voltages Rated value 24 V DC Permissible range, lower limit (DC) Permissible range, upper limit (DC) Power supply to the transmitters present Current consumption from backplane bus 5 V DC, max. Digital inputs from load voltage L+ (without load), max. Power losses Power loss, typ. Connection method Required front connector Digital inputs Number of digital inputs in groups of Number of simultaneously controllable inputs All mounting positions - concurrently controllable inputs, up to 40 C Horizontal installation - up to 40 C, max. - up to 50 C, max. Vertical installation - up to 40 C, max. Input characteristic curve acc. to IEC 1131, Type 1 Input voltage rated value, DC for signal "0" for signal "1" Input current for signal "0", max. (permissible quiescent current) for signal "1", min. for signal "1", typ. SM 1221 DI 8x24 V DC 6ES7 221-1BH30-0XB0 SM 1221 DI 16x24 V DC
Yes 20.4 V 28.8 V Yes 105 mA 4 mA; per channel 1.5 W Yes 8 2
Yes 20.4 V 28.8 V Yes 130 mA 4 mA; per channel 2.5 W Yes 16 4
8 8 8 8 Yes
16 16 16 16 Yes
24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 2.5 mA 4 mA; Typical
24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 2.5 mA 4 mA; Typical
4/40
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 221-1BF30-0XB0 Input delay (for rated value of input voltage) for standard inputs - parameterizable for interrupt inputs - parameterizable Cable length Cable length, shielded, max. Cable length unshielded, max. Digital outputs Number of digital outputs Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Diagnostic indication LED for status of the inputs for maintenance Status indicator digital input (green) Galvanic isolation Galvanic isolation digital inputs between the channels, in groups of Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - permissible temperature change Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 6ES7 221-1BH30-0XB0
Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four Yes 500 m 300 m 0
Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four Yes 500 m 300 m 0
Yes Yes Yes Yes Yes Yes
0.3 m; Five times, in dispatch package -40 C to +70 C 1080 to 660 hPa 95%
5C to 55C, 3C / minute Yes Yes Yes Yes
5C to 55C, 3C / minute Yes Yes Yes Yes
Yes
Yes
45 mm 100 mm 75 mm 170 g
45 mm 100 mm 75 mm 210 g
Siemens ST 70 2011
4/41
Siemens AG 2011
SIMATIC S7-1200
Digital modules
Ordering data
SM 1221 digital input signal module 8 inputs, 24 V DC, isolated, current sourcing/sinking 16 inputs, 24 V DC, isolated, current sourcing/sinking Extension cable for two-tier configuration for connecting digital/analog signal modules; length 2 m Terminal block (spare part) for 8/16-channel digital signal modules with 7 screws, zinc-plated; 4 units I Front flap set (spare part) for 8/16-channel signal modules S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese
K K K K K K I I I
Order No. S7-1200 automation system, Easy Book 6ES7 221-1BF30-0XB0 6ES7 221-1BH30-0XB0 6ES7 290-6AA30-0XA0 Brief instructions German English French Spanish Italian Chinese STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
D STEP 7 Basic Software Update Service, 1 year K K K K K K
Order No.
6ES7 292-1AG30-0XA0 6ES7 291-1BA30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
4/42
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules
SB 1221 digital input module
Overview
Digital inputs as a supplement to the integral I/O of SIMATIC S7-1200 CPUs Can be plugged directly into the CPU
6ES7 221-3AD30-0XB0 Product type designation Supply voltages Power supply to the transmitters Supply current, max. Current consumption from backplane bus 5 V DC, typ. Power losses Power loss, typ. Digital inputs Number of digital inputs in groups of Number of simultaneously controllable inputs all mounting positions - Concurrently controllable inputs, up to 40 C Input characteristic curve acc. to IEC 1131, Type 1 Input characteristic curve acc. to IEC 1131, Type 2 Input voltage Rated value, DC for signal "0" for signal "1" Input current for signal "0", max. (permissible quiescent current) for signal "1", min. for signal "1", typ. Input delay (for rated value of input voltage) for standard inputs - parameterizable - at "0" to "1", max. for interrupt inputs - parameterizable for counter/technological functions - parameterizable Cable length Cable length, shielded, max. 5V 0 to 1 V 2 to 6 V 3 mA 6 mA SB 1221 4xDI 5 V DC 200 kHz 6ES7 221-3BD30-0XB0 SB 1221 4xDI 24 V DC 200 kHz
4 mA; per channel 50 mA 1W 4; Current-sourcing 1
4 mA; per channel 50 mA 1W 4; Current-sourcing 1
4 Yes
Yes
24 V 0 to 5 V 15 to 30 V 2 mA 5.8 mA 14 mA
Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 2 s Yes Yes 50 m; Shielded, twisted wire pair
Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 2.5 s Yes Yes 50 m; Standard input: 500 m, high-speed counters: 50 m
Siemens ST 70 2011
4/43
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 221-3AD30-0XB0 Alarms/diagnostics/status information Alarms Alarms Diagnostics Diagnostic functions Diagnostic indication LED for status of the inputs 6ES7 221-3BD30-0XB0
Yes Yes Yes
Yes Yes Yes
Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Degree of protection IP20 Standards, approvals, certificates Marine approval according to Germanischer Lloyd Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx.
Yes Yes
Yes Yes
Yes
Yes
38 mm 62 mm 21 mm 40 g
38 mm 62 mm 21 mm 40 g
4/44
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules
Ordering data
SB 1221 signal board digital input modules 4 inputs, 5 V DC, 200 kHz 4 inputs, 24 V DC, 200 kHz Terminal block (spare part) for Signal Board with 6 screws, gold-plated; 4 units I S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
K K K K K K K K K K K K I I
Order No. STEP 7 Basic V11 engineering software 6ES7 221-3AD30-0XB0 6ES7 221-3BD30-0XB0 Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license 6ES7 298-8FA30-8AQ0 6ES7 298-8FA30-8BQ0 6ES7 298-8FA30-8CQ0 6ES7 298-8FA30-8DQ0 6ES7 298-8FA30-8EQ0 6ES7 298-8FA30-8KQ0 STEP 7 Basic V11, trial license
Order No.
6ES7 292-1BF30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/45
Siemens AG 2011
SIMATIC S7-1200
Digital modules
SM 1222 digital output module
Overview
Digital outputs as supplement to the integral I/O of the CPUs For flexible adaptation of the controller to the relevant task For subsequent expansion of the system with additional outputs
6ES7 222-1BF30-0XB0 Product type designation Supply voltages Rated value permissible range, lower limit (DC) permissible range, upper limit (DC) Current consumption from backplane bus 5 V DC, max. Digital inputs from load voltage L+ (without load), max. Power losses Power loss, typ. Connection method required front connector Digital inputs Number of digital inputs Digital outputs Number of digital outputs in groups of Short-circuit protection Limitation of inductive shutdown voltage to Switching capacity of the outputs with resistive load, max. on lamp load, max. Output voltage Rated value (AC) Rated value (DC) for signal "0" (DC), max. for signal "1", min. 1.5 W Yes 0 8 1 No; to be provided externally typ. (L+) -48 V 2.5 W Yes 0 16 1 No; to be provided externally typ. (L+) -48 V SM1222 DQ 8x24 V DC 6ES7 222-1BH30-0XB0 SM1222 DQ 16x24 V DC 6ES7 222-1HF30-0XB0 SM 1222 DQ 8xRelay 6ES7 222-1HH30-0XB0 SM1222 DQ 16xRelay
20.4 V 28.8 V
20.4 V 28.8 V
5V 30 V
5V 30 V
120 mA
140 mA
120 mA
135 mA
11 mA / relay coil
11 mA / relay coil
4.5 W Yes 0 8 2 No; to be provided externally
8.5 W Yes 0 16 1 No; to be provided externally
0.5 A 5W
0.5 A 5W
2A 30 W DC ; 200 W AC 5 to 250 V AC 5 to 30 V DC
24 V 0.1 V; with 10 kOhm load 20 V DC
24 V 0.1 V; with 10 kOhm load 20 V DC
4/46
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 222-1BF30-0XB0 Output current for signal "1" rated value for signal "1" permissible range, max. for signal "0" residual current, max. Output delay with resistive load 0 to "1", max. 1 to "0", max. Aggregate current of outputs (per group) horizontal installation - up to 50 C, max. Cable length Cable length, shielded, max. Cable length unshielded, max. Relay outputs Number of relay outputs Rated input voltage of relay L+ (DC) Number of operating cycles Switching capacity of contacts with inductive load, max. on lamp load, max. with resistive load, max. Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Diagnostic indication LED For status of the outputs for maintenance Status indicator digital output (green) Galvanic isolation Galvanic isolation digital outputs between the channels between the channels, in groups of between the channels and the backplane bus 0.5 A 6ES7 222-1BH30-0XB0 0.5 A 2A 10 A 10 A 2A 6ES7 222-1HF30-0XB0 6ES7 222-1HH30-0XB0
50 s 200 s
50 s 200 s
10 ms 10 ms
10 ms 10 ms
4 A; Current per mass 500 m 150 m
8 24 V mechanically 10 million, at rated load voltage 100,000
0.5 A 5W 0.5 A
0.5 A 5W 0.5 A
2A 30 W DC ; 200 W AC 2A
2A 30 W DC ; 200 W AC 2A
1 500 V AC
1 500 V AC
Relays 2 1500 V AC for 1 minute
Siemens ST 70 2011
4/47
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 222-1BF30-0XB0 Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C 6ES7 222-1BH30-0XB0 6ES7 222-1HF30-0XB0 6ES7 222-1HH30-0XB0
0.3 m; Five times, in dispatch package -40 C to +70 C
1080 to 660 hPa 95%
1080 to 660 hPa 95%
1080 to 660 hPa 95%
1080 to 660 hPa 95%
Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature 0 C to 55 C horizontal range mounting 0 C to 45 C vertical mounting - permissible temperature change Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 5C to 55C, 3C / minute
0 C to 55 C horizontal mounting 0 C to 45 C vertical mounting 95% non-condensing humidity 5C to 55C, 3C / minute
0 C to 55 C horizontal mounting 0 C to 45 C vertical mounting 5C to 55C, 3C / minute
0 C to 55 C horizontal mounting 0 C to 45 C vertical mounting 5C to 55C, 3C / minute
Yes
Yes
Yes
Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes
Yes
Yes
Yes
45 mm 100 mm 75 mm 180 g
45 mm 100 mm 75 mm 220 g
45 mm 100 mm 75 mm 190 g
45 mm 100 mm 75 mm 260 g
4/48
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules
Ordering data
SM 1222 digital output signal module 8 outputs, 24 V DC; 0.5 A, 5 W, isolated 16 outputs, 24 V DC; 0.5 A, 5 W, isolated 8 relay outputs, 5 ... 30 V DC/ 5 ... 250 V AC, 2 A, 30 W DC/ 200 W AC 16 relay outputs, 5 ... 30 V DC/ 5 ... 250 V AC, 2 A, 30 W DC/ 200 W AC Extension cable for two-tier configuration for connecting digital/analog signal modules; length 2 m Terminal block (spare part) for 8/16-channel digital signal modules with 7 screws, zinc-plated; 4 units I Front flap set (spare part) for 8/16-channel signal modules S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese
K K K K K K I I I
Order No. S7-1200 automation system, Easy Book 6ES7 222-1BF30-0XB0 6ES7 222-1BH30-0XB0 6ES7 222-1HF30-0XB0 Brief instructions German English French Spanish
I K K K K K K
Order No.
6ES7 222-1HH30-0XB0
Italian Chinese STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
6ES7 290-6AA30-0XA0
6ES7 292-1AG30-0XA0 6ES7 291-1BA30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/49
Siemens AG 2011
SIMATIC S7-1200
Digital modules
SB 1222 digital output module
Overview
Digital outputs as a supplement to the integral I/O of SIMATIC S7-1200 CPUs Can be plugged directly into the CPU
6ES7 222-1AD30-0XB0 Product type designation Supply voltages Power supply to the transmitters Supply current, max. Current consumption from backplane bus 5 V DC, typ. Power losses Power loss, typ. Digital outputs Number of digital outputs in groups of Short-circuit protection Switching capacity of the outputs with resistive load, max. Output voltage Rated value (DC) for signal "0" (DC), max. for signal "1", min. for signal "1" (DC), max. Output current for signal "1" rated value for signal "1" permissible range, max. for signal "0" residual current, max. Load resistance range upper limit Cable length Cable length, shielded, max. Alarms/diagnostics/status information Alarms Alarms Diagnostics Diagnostic functions Diagnostic indication LED For status of the outputs SB 1222 4xDQ 5 V DC 200kHz 6ES7 222-1BD30-0XB0 SB 1222 4xDQ 24 V DC 200kHz
4 mA; per channel 50 mA 1W
4 mA; per channel 50 mA 1W
4; MOSFET, solid-state (current-sinking/current- 4; MOSFET, solid-state (current-sinking/currentsourcing) sourcing) 1 1 No 0.1 A 5V 0.4 V L+ (-0.5 V) 6V 0.1 A 0.11 A No 0.1 A 24 V 0.1 V; with 10 kOhm load 20 V
0.1 A 10 A
5: 50 m
10 : 50 m
Yes Yes Yes
Yes Yes Yes
4/50
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 222-1AD30-0XB0 Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Degree of protection IP20 Standards, approvals, certificates Marine approval according to Germanischer Lloyd Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 6ES7 222-1BD30-0XB0
Yes Yes
Yes Yes
Yes
Yes
38 mm 62 mm 21 mm 40 g
38 mm 62 mm 21 mm 40 g
Siemens ST 70 2011
4/51
Siemens AG 2011
SIMATIC S7-1200
Digital modules
Ordering data
SB 1222 signal board digital output modules 4 outputs, 5 V DC, 0.1 A, 200 kHz I 4 outputs, 24 V DC, 0.1 A, 200 kHz Terminal block (spare part) for Signal Board with 6 screws, gold-plated; 4 units I
I
Order No. STEP 7 Basic V11 engineering software 6ES7 222-1AD30-0XB0 6ES7 222-1BD30-0XB0 Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
K K K K K K D STEP 7 Basic Software Update Service, 1 year
Order No.
6ES7 292-1BF30-0XA0
S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese 6ES7 298-8FA30-8AQ0 6ES7 298-8FA30-8BQ0 6ES7 298-8FA30-8CQ0 6ES7 298-8FA30-8DQ0 6ES7 298-8FA30-8EQ0 6ES7 298-8FA30-8KQ0
K K K K K K
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
4/52
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules
SM 1223 digital input/output module
Overview
Digital inputs and outputs as supplement to the integral I/O of the CPUs For flexible adaptation of the controller to the relevant task For subsequent expansion of the system with additional inputs and outputs
6ES7 223-1BH300XB0 Product type designation Supply voltages Rated value 24 V DC permissible range, lower limit (DC) permissible range, upper limit (DC) Power supply to the transmitters present Current consumption from backplane bus 5 V DC, max. Digital inputs from load voltage L+ (without load), max. Power losses Power loss, typ. Connection method required front connector Digital inputs Number of digital inputs in groups of Number of simultaneously controllable inputs all mounting positions - Concurrently controllable inputs, up to 40 C horizontal installation - up to 40 C, max. - up to 50 C, max. vertical installation - up to 40 C, max. SM 1223 DI 8x24 V DC, DQ 8x24 V DC 6ES7 223-1BL300XB0 SM 1223 DI 16x24 V DC, DQ 16x24 V DC 6ES7 223-1PH300XB0 SM 1223 DI 8x24 V DC, DQ 8xRelay 6ES7 223-1PL300XB0 SM 1223 DI 16x24 V DC, DQ 16xRelay 6ES7 223-1QH300XB0 120/230 V AC SM223 DIx8/DQx8 RLY
Yes 20.4 V 28.8 V
Yes 20.4 V 28.8 V
Yes 20.4 V 28.8 V
Yes 20.4 V 28.8 V
Yes 20.4 V 28.8 V
Yes 145 mA
Yes 185 mA
Yes 145 mA
Yes 180 mA
Yes 120 mA
4 mA; per channel
4 mA; per channel
2.5 W Yes 8 2
4.5 W Yes 16 2
5.5 W Yes 8 2
10 W Yes 16 2 Yes 8 4
16
16
8 8 8
16 16 16
8 8 8
16 16 16
8 8 8
Siemens ST 70 2011
4/53
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 223-1BH300XB0 Input characteristic curve acc. to IEC 1131, Type 1 Input voltage Rated value, AC Rated value, DC for signal "0" for signal "1" Yes 6ES7 223-1BL300XB0 Yes 6ES7 223-1PH300XB0 Yes 6ES7 223-1PL300XB0 Yes 6ES7 223-1QH300XB0 Yes
230 V 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 2.5 mA 4 mA; typical 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 2.5 mA 4 mA; typical 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 2.5 mA 4 mA; typical 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 1 mA 2.5 mA 4 mA; typical 20 V AC at 1 mA 79 V AC at 2.5 mA 1 mA 2.5 mA 9 mA; typical
Input current for signal "0", max. (permissible quiescent current) for signal "1", min. for signal "1", typ. Input delay (for rated value of input voltage) for standard inputs - parameterizable
Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four Yes 500 m 300 m
for interrupt inputs - parameterizable Cable length Cable length, shielded, max. Cable length unshielded, max. Digital outputs Number of digital outputs in groups of Short-circuit protection Limitation of inductive shutdown voltage to Switching capacity of the outputs with resistive load, max. on lamp load, max. Output voltage Rated value (AC) Rated value (DC) for signal "0" (DC), max. for signal "1", min. Output current for signal "1" permissible range, max. for signal "0" residual current, max. Output delay with resistive load 0 to "1", max. 1 to "0", max.
8 1 No; to be provided externally L+ (-48 V)
16 1 No; to be provided externally L+ (-48 V)
8 2 No; to be provided externally
0.5 A 5W
0.5 A 5W
2A 30 W DC ; 200 W AC 5 to 250 V AC 5 to 30 V AC
2A 30 W DC ; 200 W AC 5 to 250 V AC 5 to 30 V AC
24 V 0.1 V; with 10 kOhm load 20 V DC 0.5 A 10 A
24 V 0.1 V; with 10 kOhm load 20 V DC 0.5 A 10 A
2A
2A
2A
50 s 200 s
50 s 200 s
10 ms 10 ms
10 ms 10 ms
10 ms 10 ms
4/54
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 223-1BH300XB0 Aggregate current of outputs (per group) Horizontal installation - up to 50 C, max. Cable length Cable length, shielded, max. Cable length unshielded, max. Relay outputs Number of relay outputs Rated input voltage of relay L+ (DC) Number of operating cycles Switching capacity of contacts with inductive load, max. on lamp load, max. with resistive load, max. Alarms/diagnostics/ status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Diagnostic indication LED for status of the inputs for status of the outputs for maintenance Status indicator digital output (green) Status indicator digital input (green) Galvanic isolation Galvanic isolation digital inputs between the channels, in groups of 6ES7 223-1BL300XB0 6ES7 223-1PH300XB0 6ES7 223-1PL300XB0 6ES7 223-1QH300XB0
4 A; Current per mass
500 m 150 m
500 m 150 m
500 m 150 m
0.5 A 5W 0.5 A
0.5 A 5W 0.5 A
2A 30 W DC ; 200 W AC 2A
2A 30 W DC ; 200 W AC 2A
2A 30 W DC ; 200 W AC 2A
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Galvanic isolation digital outputs between the channels between the channels, 1 in groups of between the channels 500 V AC and the backplane bus
1 500 V AC
Siemens ST 70 2011
4/55
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 223-1BH300XB0 Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - permissible temperature change Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 6ES7 223-1BL300XB0 6ES7 223-1PH300XB0 6ES7 223-1PL300XB0 6ES7 223-1QH300XB0
0.3 m; five times, in dispatch package -40 C to +70 C
1080 to 660 hPa
1080 to 660 hPa
1080 to 660 hPa
1080 to 660 hPa
1080 to 660 hPa
95%
95%
95%
95%
95%
5C to 55C, 3C / minute Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes
Yes
Yes
Yes
Yes
45 mm 100 mm 75 mm 210 g
70 mm 100 mm 75 mm 310 g
45 mm 100 mm 75 mm 230 g
70 mm 100 mm 75 mm 350 g
45 mm 100 mm 75 mm 230 g
4/56
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules
Ordering data
SM 1223 digital input/output signal module 8 inputs, 24 V DC, IEC type 1 current sinking; 8 24 V DC transistor outputs, 0.5 A, 5 W 16 inputs, 24 V DC, IEC type 1 current sinking; 16 24 V DC transistor outputs, 0.5 A, 5 W 8 inputs, 24 V DC, IEC type 1 current sinking; 8 relay outputs, 5 ... 30 V DC/ 5 ... 250 V AC, 2 A, 30 W DC/ 200 W AC 16 inputs, 24 V DC, IEC type 1 current sinking; 16 relay outputs, 5 ... 30 V DC/ 5 ... 250 V AC, 2 A, 30 W DC/ 200 W AC 8 inputs, 120/230 V AC; 8 relay outputs, 5 ... 30 V DC/ 5 ... 250 V AC, 2 A, 30 W DC/ 200 W AC Extension cable for two-tier configuration for connecting digital/analog signal modules; length 2 m Terminal block (spare part) for 8/16-channel digital signal modules with 7 screws, zinc-plated; 4 units I Terminal block (spare part) for 8/16-channel signal modules for 32-channel signal modules S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese
K K K K K K I
Order No. S7-1200 automation system, Easy Book 6ES7 223-1BH30-0XB0 Brief instructions German English
I K K K K K K
Order No.
6ES7 223-1BL30-0XB0
French Spanish Italian
6ES7 223-1PH30-0XB0
Chinese STEP 7 Basic V11 engineering software
6ES7 223-1PL30-0XB0
6ES7 223-1QH30-0XB0
6ES7 290-6AA30-0XA0
Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license 6ES7 822-0AA01-0YA0 6ES7 822-0AA01-0YE0 6ES7 822-1AA01-0YC5 Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
6ES7 292-1AG30-0XA0 6ES7 291-1BA30-0XA0 6ES7 291-1BB30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
6ES7 298-8FA30-8AH0 6ES7 298-8FA30-8BH0 6ES7 298-8FA30-8CH0 6ES7 298-8FA30-8DH0 6ES7 298-8FA30-8EH0 6ES7 298-8FA30-8KH0 D: Subject to export regulations AL: N and ECCN: 5D992 I: Subject to export regulations AL: N and ECCN: EAR99H K: Subject to export regulations AL: N and ECCN: EAR99T
Siemens ST 70 2011
4/57
Siemens AG 2011
SIMATIC S7-1200
Digital modules
SB 1223 digital input/output module
Overview
Digital inputs and outputs as supplement to the integral I/O of the SIMATIC S7-1200 CPUs Can be plugged direct into the CPU
6ES7 223-0BD30-0XB0 Product type designation Supply voltages Rated value Permissible range, lower limit (DC) Permissible range, upper limit (DC) Power supply to the transmitters Supply current, max. Current consumption from backplane bus 5 V DC, typ. Power losses Power loss, typ. Digital inputs Number of digital inputs in groups of Number of simultaneously controllable inputs all mounting positions - Concurrently controllable inputs, up to 40 C Input characteristic curve acc. to IEC 1131, Type 1 Input voltage Rated value, DC for signal "0" for signal "1" Input current for signal "0", max. (permissible quiescent current) for signal "1", min. for signal "1", typ. SB 1223 DI2x24 V DC, DQ 2x24 V DC 6ES7 223-3AD30-0XB0 SB 1223 2xDI / 2xDQ 5 V DC 200kHz 6ES7 223-3BD30-0XB0 SB 1223 2xDI / 2xDQ 24 V DC 200kHz
20.4 V 30 V 4 mA; per channel 50 mA 1W 2; current-sinking 1 4 mA; per channel 50 mA 1W 2; current-sourcing 1 4 mA; per channel 50 mA 1W 2; current-sourcing 1
2 Yes
2 Yes
2 Yes
24 V 0 to 5 V 15 to 30 V 1 mA
5V 0 to 1 V 2 to 6 V 3 mA 6 mA
24 V 0 to 5 V 15 to 30 V 2 mA 5.8 mA 14 mA
0.5 A
4/58
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 223-0BD30-0XB0 Input delay (for rated value of input voltage) for standard inputs - parameterizable - at "0" to "1", max. - at "1" to "0", max. for interrupt inputs - parameterizable for counter/technological functions - parameterizable Cable length Cable length, shielded, max. Cable length unshielded, max. Digital outputs Number of digital outputs in groups of Short-circuit protection Switching capacity of the outputs with resistive load, max. on lamp load, max. Output voltage Rated value (DC) for signal "0" (DC), max. for signal "1", min. for signal "1" (DC), max. Output current for signal "1" rated value for signal "1" permissible range, max. for signal "0" residual current, max. Load resistance range upper limit Cable length Cable length, shielded, max. Cable length unshielded, max. Alarms/diagnostics/status information Alarms Alarms Diagnostics Diagnostic functions Diagnostic indication LED for status of the inputs for status of the outputs 6ES7 223-3AD30-0XB0 6ES7 223-3BD30-0XB0
Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 2 s 10 s Yes Yes 500 m 300 m 2; MOSFET, solid-state (currentsinking/current-sourcing) 1 No 0.5 A 5W 24 V 0.1 V; with 10 kOhm load 20 V
Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 2 s
Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four 2.5 s
Yes Yes 50 m
Yes Yes Standard input: 500 m, high-speed counters: 50 m
2; MOSFET, solid-state (currentsinking/current-sourcing) 1 No 0.1 A
2; MOSFET, solid-state (currentsinking/current-sourcing) 1 No 0.1 A
5V 0.4 V L+ (-0.5 V) 6V 0.1 A 0.11 A
24 V 0.1 V; with 10 kOhm load 20 V
0.5 A
0.1 A
10 A 0.6 : 500 m 150 m 5: 50 m
10 A 10 : 50 m
Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes Yes
Siemens ST 70 2011
4/59
Siemens AG 2011
SIMATIC S7-1200
Digital modules

6ES7 223-0BD30-0XB0 Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) 6ES7 223-3AD30-0XB0 6ES7 223-3BD30-0XB0
0.3 m; Five times, in dispatch package
Temperature - Permissible temperature range -40 C to +70 C Air pressure acc. to IEC 60068-2-13 - Permissible air pressure 1080 to 660 hPa Relative humidity - Permissible range 95% (without condensation) at 25 C Degree of protection IP20 Standards, approvals, certificates Marine approval according to Germanischer Lloyd Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes
38 mm 62 mm 21 mm 40 g
38 mm 62 mm 21 mm 40 g
38 mm 62 mm 21 mm 40 g
4/60
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Digital modules
Ordering data
SB 1223 digital input/output signal board 2 inputs, 24 V DC, IEC type 1 current sinking; 2 24 V DC transistor outputs, 0.5 A, 5 W; can be used as HSC at up to 30 kHz
I
Order No. S7-1200 automation system, Easy Book 6ES7 223-0BD30-0XB0 Brief instructions German English French 6ES7 223-3AD30-0XB0 6ES7 223-3BD30-0XB0 Spanish Italian Chinese STEP 7 Basic V11 engineering software 6ES7 292-1BF30-0XA0 Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
D STEP 7 Basic Software Update Service, 1 year K K K K K K
Order No.
Terminal block (spare part) for signal board with 6 screws, gold-plated; 4 units I S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese
K K K K K K
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/61
Siemens AG 2011
SIMATIC S7-1200
SIPLUS digital modules
SIPLUS SM 1221 digital input module
Overview
Ambient conditions Relative humidity Biologically active substances 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
Digital inputs as supplement to the integral I/O of the CPUs For flexible adaptation of the controller to the corresponding task For subsequent expansion of the system with additional inputs From +60 C to +70 C, max. 50% of the inputs can be controlled simultaneously Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
1)
ISA-S71.04 severity level GX: Long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm Limit value (max. 30 min/d): SO2 < 17.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm 2) The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!
SIPLUS SM 1221 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 221-1BF302XB0 -25 ... +70 C 6AG1 211-1BF304XB0 0 ... +55 C
Ordering data
Digital input SIPLUS SM 1221 signal module (extended temperature range and medial exposure) 8 inputs, 24 V DC, isolated, current sourcing/sinking H Suitable for areas with extraordinary medial exposure (conformal coating) I -25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50 % 16 inputs, 24 V DC, isolated, current sourcing/sinking H Suitable for areas with extraordinary medial exposure (conformal coating) I -25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50 % Accessories 6ES7 221-1BF30-0XB0 Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for ambient conditions.
Order No.
6AG1 221-1BF30-4XB0 6AG1 221-1BF30-2XB0
SIPLUS SM 1221 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 221-1BH302XB0 -25 ... +70 C 6AG1 221-1BH304XB0 0 ... +55 C
6ES7 221-1BH30-0XB0 Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for ambient conditions.
6AG1 221-1BH30-4XB0 6AG1 221-1BH30-2XB0
See SIMATIC S7-1200 SM 1221 digital input, page 4/42
4/62
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS SM 1222 digital output module
Overview
Digital outputs as a supplement to the integral I/O of the CPUs For flexible adaptation of the controller to the corresponding task For subsequent expansion of the system with additional outputs From +60 C to +70 C, max. 50% of the inputs can be controlled simultaneously Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS SM 1222 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 222-1BF30-2XB0 6ES7 222-1BF30-0XB0 -25 ... +70 C 0 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 222-1BF30-4XB0
SIPLUS SM 1222 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 222-1BH30-2XB0 6ES7 222-1BH30-0XB0 -25 ... +70 C 0 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 222-1BH30-4XB0
SIPLUS SM 1222 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 222-1HF30-2XB0 6ES7 222-1HF30-0XB0 -25 ... +70 C 0 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 222-1HF30-4XB0
SIPLUS SM 1222 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 222-1HH30-2XB0 6ES7 222-1HH30-0XB0 -25 ... +70 C 0 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 222-1HH30-4XB0
Siemens ST 70 2011
4/63
Siemens AG 2011
SIMATIC S7-1200
SIPLUS SM 1222 digital output module
1)
2)
Ordering data
Digital output SIPLUS SM 1222 signal module (extended temperature range and medial exposure) 8 outputs, 24 V DC; 0.5 A, 5 W, isolated Suitable for areas with extraordinary medial exposure (conformal coating) -25 ... +70 C, from +60 +70C number of simultaneously controllable inputs and outputs max. 50 %
Order No. 8 relay outputs, 5 ... 30 V DC/ 5 ... 250 V AC, 2 A, 30 W DC/ 200 W AC Suitable for areas with extraordinary medial exposure (conformal coating) -25 ... +70 C, from +60 +70C number of simultaneously controllable inputs and outputs max. 50 % 16 relay outputs, 5 ... 30 V DC/ 5 ... 250 V AC, 2 A, 30 W DC/ 200 W AC Suitable for areas with extraordinary medial exposure (conformal coating) -25 ... +70 C, from +60 +70C number of simultaneously controllable inputs and outputs max. 50 % Accessories
6AG1 222-1HF30-4XB0 6AG1 222-1HF30-2XB0
6AG1 222-1BF30-4XB0 6AG1 222-1BF30-2XB0
6AG1 222-1HH30-4XB0 6AG1 222-1HH30-2XB0
16 outputs, 24 V DC; 0.5 A, 5 W, isolated H Suitable for areas with extraordinary medial exposure (conformal coating) I -25 ... +70 C, from +60 +70C number of simultaneously controllable inputs and outputs max. 50 %
6AG1 222-1BH30-4XB0 6AG1 222-1BH30-2XB0
See SIMATIC S7-1200 SM 1222 digital output, page 4/49
4/64
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS SM 1223 digital input/output module
Overview
Digital inputs and outputs as supplement to the integral I/O of the CPUs For flexible adaptation of the controller to the corresponding task For subsequent expansion of the system with additional inputs and outputs From +60 C to +70 C, max. 50% of the inputs can be controlled simultaneously Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS SM 1223 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 223-1BH30-2XB0 6ES7 223-1BH30-0XB0 -25 ... +70 C 0 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 223-1BH30-4XB0
SIPLUS SM 1223 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 223-1PH30-2XB0 6ES7 223-1PH30-0XB0 -25 ... +70 C 0 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 223-1PH30-4XB0
SIPLUS SM 1223 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 223-1PL30-2XB0 6ES7 223-1PL30-0XB0 -25 ... +70 C 0 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 223-1PL30-4XB0
SIPLUS SM 1223 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 223-1BL30-2XB0 6ES7 223-1BL30-0XB0 -25 ... +70 C 0 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 223-1BL30-4XB0
Siemens ST 70 2011
4/65
Siemens AG 2011
SIMATIC S7-1200
SIPLUS SM 1223 digital input/output module
1)
2)
Ordering data
Digital input/output SIPLUS SM 1223 signal module (extended temperature range and medial exposure) 8 inputs, 24 V DC, IEC type 1 current sinking; 8 transistor outputs, 24 V DC, 0.5 A, 5 W H Suitable for areas with extraordinary medial exposure (conformal coating) I -25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50 % 16 inputs, 24 V DC, IEC type 1 current sinking; 16 transistor outputs, 24 V DC, 0.5 A, 5 W H Suitable for areas with extraordinary medial exposure (conformal coating) I -25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50 %
Order No. 8 inputs, 24 V DC, IEC type 1 current sinking; 8 relay outputs, 5 ... 30 V DC / 5 ... 250 V AC, 2 A, 30 W DC / 200 W AC H Suitable for areas with extraordinary medial exposure (conformal coating) I -25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50 % 16 inputs, 24 V DC, IEC type 1 current sinking; 16 relay outputs, 5 ... 30 V DC / 5 ... 250 V AC, 2 A, 30 W DC / 200 W AC H Suitable for areas with extraordinary medial exposure (conformal coating) I -25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50 % Accessories
6AG1 223-1PH30-4XB0 6AG1 223-1PH30-2XB0
6AG1 223-1BH30-4XB0 6AG1 223-1BH30-2XB0
6AG1 223-1PL30-4XB0 6AG1 223-1PL30-2XB0
6AG1 223-1BL30-4XB0 6AG1 223-1BL30-2XB0
See SIMATIC S7-1200 SM 1223 digital input/output, page 4/57
4/66
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS SB 1223 digital input/output module
Overview
Digital inputs and outputs as supplement to the integral I/O of the SIPLUS S7-1200-CPUs Can be plugged directly into the CPU (cannot be used for +70 C version) Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS SB 1223 Order number Order No. based on Ambient temperature range Conformal coating Technical data Ambient conditions Relative humidity Biologically active substances Chemically active substances Mechanically active substances Air pressure (depending on the highest positive temperature range specified) 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K 6AG1 223-0BD30-4XB0 6ES7 223-0BD30-0XB0 0 ... +55 C -25 ... +55 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 223-0BD30-5XB0
1)
ISA-S71.04 severity level GX: Long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm Limit value (max. 30 min/d): SO2 < 17.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm Order No.
Ordering data
Digital input/output SIPLUS SM 1223 signal board (extended temperature range and medial exposure) 2 inputs, 24 V DC, IEC type 1 current sinking; 2 transistor outputs, 24 V DC, 0.5 A, 5 W; usable as HSC up to 30 kHz Suitable for areas with extraordinary medial exposure (conformal coating) Ambient temperature -25 ... +55 C
Order No. Accessories See SIMATIC S7-1200 SB 1223 digital input/output, page 4/61
6AG1 223-0BD30-4XB0 6AG1 223-0BD30-5XB0 H: Subject to export regulations AL: 9I999 and ECCN: EAR99H I: Subject to export regulations AL: N and ECCN: EAR99H
Siemens ST 70 2011
4/67
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SM 1231 analog input module
Overview
Analog inputs for SIMATIC S7-1200 With extremely short conversion times For connecting analog sensors without additional amplifiers For solving even more complex automation tasks
6ES7 231-4HD30-0XB0 Product type designation Supply voltages Rated value 24 V DC Current consumption Current consumption, typ. from backplane bus 5 V DC, typ. Power losses Power loss, typ. Connection method required front connector Analog inputs Number of analog inputs Permissible input frequency for current input (destruction limit), max. Permissible input current for voltage input (destruction limit), max. Cycle time (all channels) max. Input ranges Voltage Current Thermocouple Resistance thermometer Resistance Input ranges (rated values), voltages -10 V to +10 V Input resistance (-10 V to +10 V) -2.5 V to +2.5 V Input resistance (-2.5 V to +2.5 V) -5 V to +5 V Input resistance (-5 V to +5 V) Input ranges (rated values), currents 0 to 20 mA Input resistance (0 to 20 mA) Voltage input permissible input voltage for voltage input (destruction limit), max. SM 1231 AI 4x13 bit 6ES7 231-4HF30-0XB0 SM 1231 AI 8 x 13 bit
Yes 45 mA 80 mA 1.5 W Yes 4; current or voltage differential inputs 35 V 40 mA 625 s Yes; 10 V, 5 V, 2.5 V Yes; 0 to 20 mA No No No Yes t9 MOhm Yes t9 MOhm Yes t9 MOhm Yes t 250 Ohm 35 V
Yes 45 mA 90 mA 1.5 W Yes 8; current or voltage differential inputs 35 V 40 mA 625 s Yes; 10 V, 5 V, 2.5 V Yes; 0 to 20 mA No No No Yes t9 MOhm Yes t9 MOhm Yes t9 MOhm Yes t 250 Ohm 35 V
4/68
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules

6ES7 231-4HD30-0XB0 Current input permissible input current for current input (destruction limit), max. Temperature compensation Temperature compensation parameterizable Analog outputs Number of analog outputs Analog value creation Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Interference voltage suppression for interference frequency f1 in Hz Smoothing of measured values Parameterizable Step: None Step: Low Step: Medium Step: High Errors/accuracies Temperature error (relative to input area) Basic error limit (operational limit at 25 C) Voltage, relative to input area Current, relative to input area Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency Common mode voltage, max. Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Monitoring the supply voltage to the electronics Wire break Diagnostic indication LED for status of the inputs for maintenance Galvanic isolation Galvanic isolation analog outputs between the channels and the power supply of the electronics Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C 40 mA 6ES7 231-4HF30-0XB0 40 mA
No 0
No 0
12 bit; + sign Yes 40 dB, DC to 60 V for interference frequency 50 / 60 Hz Yes Yes Yes Yes Yes 25C 0.1% to 55C 0.2% total measurement range +/- 0.1 % +/- 0.1 %
12 bit; + sign Yes 40 dB, DC to 60 V for interference frequency 50 / 60 Hz Yes Yes Yes Yes Yes 25C 0.1% to 55C 0.2% total measurement range +/- 0.1 % +/- 0.1 %
12 V
12 V
Yes Yes Yes Yes No Yes Yes
Yes Yes Yes Yes No Yes Yes
No
No
0.3 m; five times, in dispatch package -40 C to +70 C 1080 to 660 hPa 95%
Siemens ST 70 2011
4/69
Siemens AG 2011
SIMATIC S7-1200
Analog modules
6ES7 231-4HD30-0XB0 Mechanical and climatic conditions during operation Climatic conditions in operation Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation Degree of protection IP20 6ES7 231-4HF30-0XB0
1080 to 795 hPa S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free Yes Yes Yes Yes
Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx.
Yes
Yes
45 mm 100 mm 75 mm 180 g
45 mm 100 mm 75 mm 180 g
Ordering data
SM 1231 analog input signal module 4 analog inputs 10 V, 5 V, 2.5 V, or 0 ... 20 mA 12 bit + sign 8 analog inputs 10 V, 5 V, 2.5 V, or 0 ... 20 mA 12 bit + sign Extension cable for two-tier configuration for connecting digital/analog signal modules; length 2 m Terminal block (spare part) for 8/16-channel analog signal modules with 7 screws, gold-plated; 4 units I Front flap set (spare part) for 8/16-channel signal modules S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese
K K K K K K I
Order No. S7-1200 automation system, Easy Book 6ES7 231-4HD30-0XB0 Brief instructions German
I K K K K K K
Order No.
6ES7 231-4HF30-0XB0
English French Spanish Italian Chinese STEP 7 Basic V11 engineering software Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license
6ES7 290-6AA30-0XA0
6ES7 292-1BG30-0XA0 6ES7 291-1BA30-0XA0
Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license STEP 7 Basic Software Update Service, 1 year
D
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
6ES7 298-8FA30-8AH0 6ES7 298-8FA30-8BH0 6ES7 298-8FA30-8CH0 6ES7 298-8FA30-8DH0 6ES7 298-8FA30-8EH0 6ES7 298-8FA30-8KH0 D: Subject to export regulations AL: N and ECCN: 5D992 I: Subject to export regulations AL: N and ECCN: EAR99H K: Subject to export regulations AL: N and ECCN: EAR99T
4/70
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SB 1231 analog input module
Overview
Analog input module for the SIMATIC S7-1200 With extremely short conversion times For the connection of analog sensors without additional amplifiers For the solution of more complex automation tasks as well Can be plugged directly into the CPU
Product type designation Analog value creation Measurement principle Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Interference voltage suppression for interference frequency f1 in Hz Smoothing of measured values parameterizable Step: None Step: Low Step: Medium Step: High Errors/accuracies Temperature error (relative to input area) Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Wire break Diagnostic indication LED for status of the inputs for maintenance
6ES7 231-4HA30-0XB0 SB1231 AI 1x12 BIT Integrating
11 bit; + sign Yes 40 dB, DC to 60 Hz
Product type designation Supply voltages Rated value 24 V DC Connection method required front connector Analog inputs Number of analog inputs permissible input frequency for current input (destruction limit), max. Cycle time (all channels) max. Input ranges Voltage Current Thermocouple Resistance thermometer Resistance Input ranges (rated values), voltages -10 V to +10 V Input resistance (-10 V to +10 V) -2.5 V to +2.5 V Input resistance (-2.5 V to +2.5 V) -5 V to +5 V Input resistance (-5 V to +5 V) Input ranges (rated values), currents 0 to 20 mA Input resistance (0 to 20 mA) Voltage input permissible input voltage for voltage input (destruction limit), max. Cable length Cable length, shielded, max. 6ES7 231-4HA30-0XB0 SB1231 AI 1x12 BIT
Yes Yes 1; Current or voltage differential inputs 35 V
Yes Yes Yes Yes Yes 25 C 0.3% to 55 C 0.6% total measurement range
156.25 s; 400 Hz suppression Yes; 10 V, 5 V, 2.5 V Yes; 0 to 20 mA No No No
Yes Yes Yes No Yes Yes
Yes t9 MOhm Yes t9 MOhm Yes t9 MOhm
Yes t 250 Ohm
Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) 0.3 m; five times, in dispatch package Temperature - Permissible temperature range -40 C to +70 C Air pressure acc. to IEC 60068-2-13 - Permissible air pressure 1080 to 660 hPa Relative humidity - Permissible range (without 95% condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation
35 V
1080 to 795 hPa S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
Twisted and shielded in pairs
Siemens ST 70 2011
4/71
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SB 1231 analog input module

Product type designation Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 6ES7 231-4HA30-0XB0 SB1231 AI 1x12 BIT Yes Yes Yes Yes
Ordering data
SB 1231 signal board analog input module 1 analog input, 10 V with 12 bit or 0 ... 20 mA with 11 bit Terminal block (spare part) for signal board with 6 screws, gold-plated; 4 units I S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English
K K K K K K I
Order No.
6ES7 231-4HA30-0XB0
6ES7 292-1BF30-0XA0
Yes
38 mm 62 mm 21 mm 35 g
French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license STEP 7 Basic Software Update Service, 1 year
K K K K K K
6ES7 822-0AA01-0YA7
D
6ES7 822-0AA00-0YL0
4/72
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SM 1232 analog output module
Overview
Analog outputs for SIMATIC S7-1200 With extremely short conversion times For connecting analog actuators without additional amplifiers For solving even more complex automation tasks
6ES7 232-4HB30-0XB0 Product type designation Supply voltages Rated value 24 V DC Current consumption Current consumption, typ. from backplane bus 5 V DC, typ. Power losses Power loss, typ. Connection method required front connector Analog inputs Number of analog inputs Temperature compensation Temperature compensation parameterizable Analog outputs Number of analog outputs Output ranges, voltage -10 to +10 V Output ranges, current 0 to 20 mA Load impedance (in rated range of output) with voltage outputs, min. with current outputs, max. Analog value creation Measurement principle Integrations and conversion time/ resolution per channel Resolution (incl. overrange) Integration time, parameterizable Interference voltage suppression for interference frequency f1 in Hz SM 1232 AQ 2x14 bit 6ES7 232-4HD30-0XB0 SM 1232 AQ 4 x14 bit
Yes 45 mA 80 mA 1.5 W Yes 0 No 2; current or voltage Yes Yes 1 000 : 600 : Differential
Yes 45 mA 80 mA 1.5 W Yes
No 4; current or voltage Yes Yes 1 000 : 600 : Differential
Voltage: 14 bit; Current : 13 bit Yes 40 dB, DC to 60 V for interference frequency 50 / 60 Hz
Voltage: 14 bit; Current : 13 bit Yes 40 dB, DC to 60 V for interference frequency 50 / 60 Hz
Siemens ST 70 2011
4/73
Siemens AG 2011
SIMATIC S7-1200
Analog modules

6ES7 232-4HB30-0XB0 Errors/accuracies Temperature error (relative to output area) Basic error limit (operational limit at 25 C) Voltage, relative to output area Current, relative to output area Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency common mode voltage, max. Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Monitoring the supply voltage to the electronics Wire break Short circuit Diagnostic indication LED for status of the outputs for maintenance Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 25C 0.3% to 55C 0.6% total measurement range +/- 0.3 % +/- 0.3 % 6ES7 232-4HD30-0XB0 25C 0.3% to 55C 0.6% total measurement range +/- 0.3 % +/- 0.3 %
12 V
12 V
Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes Yes Yes
Yes
Yes
45 mm 100 mm 75 mm 180 g
45 mm 100 mm 75 mm 180 g
4/74
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules
Ordering data
SM 1232 analog output signal module 2 analog outputs, 10 V with 14 bit or 0 ... 20 mA with 13 bit 4 analog outputs, 10 V with 14 bit or 0 ... 20 mA with 13 bit Extension cable for two-tier configuration for connecting digital/analog signal modules; length 2 m Terminal block (spare part) for 8/16-channel analog signal modules with 7 screws, gold-plated; 4 units S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
K K K K K K K K K K K K I I I I
Order No. STEP 7 Basic V11 engineering software 6ES7 232-4HB30-0XB0 6ES7 232-4HD30-0XB0 6ES7 290-6AA30-0XA0 Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license 6ES7 298-8FA30-8AH0 6ES7 298-8FA30-8BH0 6ES7 298-8FA30-8CH0 6ES7 298-8FA30-8DH0 6ES7 298-8FA30-8EH0 6ES7 298-8FA30-8KH0 Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
Order No.
6ES7 292-1BG30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
6ES7 298-8FA30-8AQ0 6ES7 298-8FA30-8BQ0 6ES7 298-8FA30-8CQ0 6ES7 298-8FA30-8DQ0 6ES7 298-8FA30-8EQ0 6ES7 298-8FA30-8KQ0 D: Subject to export regulations AL: N and ECCN: 5D992 I: Subject to export regulations AL: N and ECCN: EAR99H K: Subject to export regulations AL: N and ECCN: EAR99T
Siemens ST 70 2011
4/75
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SB 1232 analog output module
Overview
6ES7 232-4HA30-0XB0 Product type designation Supply voltages Power supply to the transmitters Supply current, max. Current consumption from backplane bus 5 V DC, typ. Power losses Power loss, typ. SB 1232 1x AO
25 mA 15 mA 1.5 W 1 Voltage: 300 PS (R), 750 PS (1 uF) Current: 600 ms (1 mH); 2 ms (10 mH) Yes Yes
Analog outputs Number of analog outputs Cycle time (all channels) max.
Output ranges, voltage -10 to +10 V
Analog output for the SIMATIC S7-1200 Can be plugged direct into the CPU
Output ranges, current 0 to 20 mA Load impedance (in rated range of output) with voltage outputs, min. with current outputs, max. Cable length Cable length, shielded, max. Analog value creation Measurement principle Integrations and conversion time/ resolution per channel Resolution (incl. overrange) Smoothing of measured values parameterizable Errors/accuracies Temperature error (relative to output area) Alarms/diagnostics/status information Alarms Alarms Diagnostics Diagnostic functions Diagnostic indication LED For status of the outputs
1 000 : 600 : Shielded, twisted wire pair Differential
U / 12 bit, I / 11 bit Yes 25C 0.5% bis 55C 1%
Yes Yes Yes
Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) 0.3 m; five times, in dispatch package Temperature - Permissible temperature range -40 C to +70 C Air pressure acc. to IEC 60068-2-13 - Permissible air pressure 1080 to 660 hPa Relative humidity - Permissible range (without 95% condensation) at 25 C
4/76
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SB 1232 analog output module

6ES7 232-4HA30-0XB0 Mechanical and climatic conditions during operation Climatic conditions in operation Pollutant concentrations - SO2 at RH < 60% without condensation Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx.
Ordering data
SB 1232 analog output signal board 1 analog output, 10 V with 12 bit or 0 ... 20 mA with 11 bit Terminal block (spare part)
I
Order No.
6ES7 232-4HA30-0XB0
S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free Yes Yes Yes Yes
for signal board with 6 screws, gold-plated; 4 units I S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese
K K K K K K
6ES7 292-1BF30-0XA0
Yes
38 mm 62 mm 21 mm 40 g
S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license STEP 7 Basic Software Update Service, 1 year
D K K K K K K
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/77
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SM 1234 analog input/output module
Overview
6ES7 234-4HE30-0XB0 Product type designation Supply voltages Rated value 24 V DC Current consumption Current consumption, typ. from backplane bus 5 V DC, typ. Power losses Power loss, typ. Connection method Required front connector Analog inputs Number of analog inputs Permissible input frequency for current input (destruction limit), max. Permissible input current for voltage input (destruction limit), max. Cycle time (all channels) max. Input ranges Voltage Current Thermocouple Resistance thermometer Resistance Input ranges (rated values), voltages -10 V to +10 V Input resistance (-10 V to +10 V) -2.5 V to +2.5 V Input resistance (-2.5 V to +2.5 V) -5 V to +5 V Input resistance (-5 V to +5 V) Input ranges (rated values), currents 0 to 20 mA Input resistance (0 to 20 mA) Voltage input Permissible input voltage for voltage input (destruction limit), max. Current input Permissible input current for current input (destruction limit), max. Temperature compensation Temperature compensation parameterizable SM 1234 A I4x13 bit AQ 2x14 bit
Yes 60 mA 80 mA 2W Yes 4; current or voltage differential inputs 35 V
Analog inputs and outputs for the SIMATIC S7-1200 With extremely short conversion times For connecting analog actuators and sensors without additional amplifiers For solving even more complex automation tasks
40 mA 625 s Yes; 10 V, 5 V, 2.5 V Yes; 0 to 20 mA No No No
Yes t9 MOhm Yes t9 MOhm Yes t9 MOhm
Yes t 250 Ohm
35 V
40 mA
No
4/78
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules

6ES7 234-4HE30-0XB0 Analog outputs Number of analog outputs Output ranges, voltage -10 to +10 V Output ranges, current 0 to 20 mA Load impedance (in rated range of output) with voltage outputs, min. with current outputs, max. Analog value creation Measurement principle Integrations and conversion time/ resolution per channel Resolution (incl. overrange) Resolution with overrange (bit including sign), max. Integration time, parameterizable Interference voltage suppression for interference frequency f1 in Hz Smoothing of measured values Parameterizable Step: None Step: Low Step: Medium Step: High Errors/accuracies Temperature error (relative to input area) Temperature error (relative to output area) Basic error limit (operational limit at 25 C) Voltage, relative to input area Current, relative to input area Voltage, relative to output area Current, relative to output area Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency common mode voltage, max. Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Monitoring the supply voltage to the electronics Wire break Short circuit Diagnostic indication LED for status of the inputs For status of the outputs for maintenance 2; current or voltage Yes Yes Galvanic isolation Galvanic isolation analog outputs between the channels and the power supply of the electronics 6ES7 234-4HE30-0XB0
No
1 000 : 600 : Differential
Voltage: 14 bit; Current : 13 bit 12 bit; + sign Yes 40 dB, DC to 60 V for interference frequency 50 / 60 Hz Yes Yes Yes Yes Yes 25C 0.1% to 55C 0.2% total measurement range 25C 0.3% to 55C 0.6% total measurement range
Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) 0.3 m; five times, in dispatch package Temperature - Permissible temperature range -40 C to +70 C Air pressure acc. to IEC 60068-2-13 - Permissible air pressure 1080 to 660 hPa Relative humidity - Permissible range (without 95% condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx.
+/- 0,1 % +/- 0,1 % +/- 0,3 % +/- 0,3 %
Yes
12 V
45 mm 100 mm 75 mm 220 g
Yes Yes Yes Yes Yes Yes Yes Yes Yes
Siemens ST 70 2011
4/79
Siemens AG 2011
SIMATIC S7-1200
Analog modules
Ordering data
SM 1234 analog input/output signal module 4 analog inputs, 10 V, 5 V, 2.5 V, or 0 ... 20 mA, 12 bit + sign; 2 analog outputs, 10 V with 14 bit or 0 ... 20 mA with 13 bit Extension cable for two-tier configuration for connecting digital/analog signal modules; length 2 m Terminal block (spare part) for 8/16-channel analog signal modules with 7 screws, gold-plated; 4 units I Front flap set (spare part) for 8/16-channel signal modules S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
Order No. STEP 7 Basic V11 engineering software 6ES7 234-4HE30-0XB0 Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license 6ES7 298-8FA30-8AH0 6ES7 298-8FA30-8BH0 6ES7 298-8FA30-8CH0 6ES7 298-8FA30-8DH0 6ES7 298-8FA30-8EH0 6ES7 298-8FA30-8KH0 STEP 7 Basic V11, trial license
Order No.
6ES7 290-6AA30-0XA0
6ES7 292-1BG30-0XA0 6ES7 291-1BA30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
4/80
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SM 1231 thermocouple module
Overview
For the convenient recording of temperatures with great accuracy 7 common thermocouple types can be used Also for the measurement of analog signals with a low level (80 mV) Can easily be retrofitted to existing plant
6ES7 231-5QD30-0XB0 Product type designation Supply voltages Rated value 24 V DC Current consumption Current consumption, typ. From backplane bus 5 V DC, typ. Power losses Power loss, typ. Connection method Required front connector Analog inputs Number of analog inputs Permissible input frequency for current input (destruction limit), max. Technical unit for temperature measurement adjustable Input ranges Thermocouple Input ranges (rated values), voltages -80 mV to +80 mV Input resistance (-80 mV to +80 mV) Input ranges (rated values), thermoelements Type C Type E Type J Type K Type N Type R Type S Type T Type TXK/TXK(L) to GOST Thermocouple (TC) permissible input voltage for voltage input (destruction limit), max. Temperature compensation Temperature compensation parameterizable SM1231 TC 4x16 bit 6ES7 231-5QF30-0XB0 SM 1231 TC 8x16 bit
Yes 40 mA 80 mA 1.5 W Yes 4; Thermocouples 35 V Degrees Celsius/degrees Fahrenheit
Yes
80 mA 1.5 W Yes 8; Thermocouples 35 V Degrees Celsius/degrees Fahrenheit
Yes; J, K, T, E, R, S, N, C, TXK/XK(L); voltage range: +/-80 mV Yes >=1MOhm Yes Yes Yes Yes Yes Yes Yes Yes Yes +-35V
Yes; J, K, T, E, R, S, N, C, TXK/XK(L); voltage range: +/-80 mV Yes >=1MOhm Yes Yes Yes Yes Yes Yes Yes Yes Yes +-35V
No
No
Siemens ST 70 2011
4/81
Siemens AG 2011
SIMATIC S7-1200
Analog modules

6ES7 231-5QD30-0XB0 Analog value creation Measurement principle Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Interference voltage suppression for interference frequency f1 in Hz Integrating 6ES7 231-5QF30-0XB0 Integrating
15 bit; + sign No 85 dB at 50/60/400 Hz
Analog value generation (in isochronous mode) Smoothing of measured values Parameterizable Errors/accuracies Cold connection point Temperature error (relative to input area) Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency Common mode interference, min. Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Monitoring the supply voltage to the electronics Wire break Diagnostic indication LED for status of the inputs for maintenance Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation
Yes
Yes +/-1.5 C
25C 0.1% to 55C 0.2% total measurement range
120 dB
120 dB
Yes Yes Yes; can be read out Yes Yes Yes Yes
0 C to 55 C horizontal mounting 0 C to 45 C vertical mounting 1080 to 795 hPa S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
4/82
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules
6ES7 231-5QD30-0XB0 Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. Yes Yes Yes Yes 6ES7 231-5QF30-0XB0 Yes Yes Yes Yes
Yes
Yes
45 mm 100 mm 75 mm 180 g
45 mm 100 mm 75 mm 220 g
Ordering data
SM 1231 thermocouple module 4 inputs +/- 80 mV, resolution 15 bit + sign, thermocouple types J, K, S, T, R, E, N
I
Order No. STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
Order No.
6ES7 231-5QD30-0XB0
I 8 inputs +/- 80 mV, resolution 15 bit + sign, thermocouple types J, K, T, E, R, S, N, C, TXK/XK(L)
6ES7 231-5QF30-0XB0
Accessories Terminal block (spare part) for 8/16-channel analog signal modules with 7 screws, gold-plated; 4 units I Front flap set (spare part) for 8/16-channel signal modules S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
K K K K K K K K K K K K
6ES7 292-1BG30-0XA0 6ES7 291-1BA30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/83
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SB 1231 thermocouple signal board
Overview
For the convenient recording of temperatures with great accuracy 1 input with 16-bit resolution Common thermocouple types can be used Also for the measurement of analog signals with a low level (80 mV) Can easily be retrofitted to existing plant Can be plugged directly into the CPU
Product type designation Analog value generation (in isochronous mode) Smoothing of measured values parameterizable Errors/accuracies Temperature error (relative to input area) Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency Common mode interference, min. Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Wire break Diagnostic indication LED for status of the inputs for maintenance Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation
6ES7 231-5QA30-0XB0 SB1231 AI 1xTC
Yes 25C 0.1% to 55C 0.2% total measurement range
6ES7 231-5QA30-0XB0 Product type designation Supply voltages Rated value 24 V DC Current consumption Current consumption, typ. Connection method required front connector Analog inputs Number of analog inputs Permissible input frequency for current input (destruction limit), max. Technical unit for temperature measurement adjustable Input ranges Thermocouple Input ranges (rated values), voltages -80 mV to +80 mV Input resistance (-80 mV to +80 mV) Input ranges (rated values), thermoelements Type J Input resistance (type J) Type K Input resistance (Type K) Thermocouple (TC) Permissible input voltage for voltage input (destruction limit), max. Temperature compensation Temperature compensation parameterizable Analog value creation Measurement principle Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Interference voltage suppression for interference frequency f1 in Hz SB1231 AI 1xTC
120 dB
Yes 5 mA Yes 1; Thermocouples 35 V
Yes Yes Yes; Can be read out Yes Yes Yes
Degrees Celsius/degrees Fahrenheit Yes; J, K; voltage range 80 MV
0.3 m; Five times, in dispatch package -40C to +70C
Yes >=1 MOhm
1080 to 660 hPa 95%
Yes 1200C Yes 1372C +-35V
0C to 55C horizontal mounting, 0C to 45C vertical mounting
No
Integrating
15 bit; + sign No 85 dB at 10 / 50 / 60 / 400 Hz
4/84
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SB 1231 thermocouple signal board

6ES7 231-5QA30-0XB0 Product type designation Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. SB1231 AI 1xTC Yes Yes Yes Yes
Ordering data
SB 1231 thermocouple signal board 1 input +/- 80 mV, resolution 15 bit + sign, thermocouples type J, K Accessories Terminal block (spare part) for signal board with 6 screws, gold-plated; 4 units I S7-1200 automation system, system manual
I
Order No. 6ES7 231-5QA30-0XB0
6ES7 292-1BF30-0XA0
Yes
For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
D STEP 7 Basic Software Update Service, 1 year K K K K K K K K K K K K
4
38 mm 62 mm 21 mm 35 g
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/85
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SM 1231 RTD signal module
Overview
For the convenient recording of temperatures with great accuracy 4 inputs Most popular resistance temperature detectors can be used Can easily be retrofitted to existing installation
6ES7 231-5PD30-0XB0 Product type designation SM1231 RTD 4x16 bit 6ES7 231-5PF30-0XB0 SM 1231 RTD 8x16 bit
Supply voltages Rated value 24 V DC Current consumption Current consumption, typ. From backplane bus 5 V DC, typ. Power losses Power loss, typ. Connection method Required front connector Analog inputs Number of analog inputs Permissible input frequency for current input (destruction limit), max. Technical unit for temperature measurement adjustable Input ranges Resistance thermometer
Yes 40 mA 80 mA 1.5 W Yes 4; Resistance thermometer 35 V Degrees Celsius/degrees Fahrenheit
Yes
80 mA 1.5 W Yes 8; Resistance thermometer 35 V Degrees Celsius/degrees Fahrenheit
Resistance Input ranges (rated values), resistance thermometers Cu 10 Input resistance (Cu 10) Ni 100 Input resistance (Ni 100) Ni 1000 Input resistance (Ni 1000) LG-Ni 1000 Input resistance (LG-Ni 1000) Ni 120 Input resistance (Ni 120) Ni 200 Input resistance (Ni 200) Ni 500 Input resistance (Ni 500) Pt 100 Input resistance (Pt 100) Pt 1000 Input resistance (Pt 1000) Pt 200 Input resistance (Pt 200) Pt 500 Input resistance (Pt 500) Input ranges (rated values), resistors 0 to 150 Ohm 0 to 300 Ohm 0 to 600 Ohm Temperature compensation Temperature compensation parameterizable
Yes; Resistance-type transmitter: Pt10, Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500, Ni1000, Cu10, Cu50, Cu 100, LG-Ni1000 Yes; 150 :, 300 :, 600 :
Yes; Resistance-type transmitter: Pt10, Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500, Ni1000, Cu10, Cu50, Cu 100, LG-Ni1000 Yes; 150 :, 300 :, 600 :
Yes 10 : Yes 100 : Yes 1 000 : Yes 1 000 : Yes 120 : Yes 200 : Yes 500 : Yes 100 : Yes 1 000 : Yes 200 : Yes 500 : Yes Yes Yes No
Yes 10 : Yes 100 : Yes 1 000 : Yes 1 000 : Yes 120 : Yes 200 : Yes 500 : Yes 100 : Yes 1 000 : Yes 200 : Yes 500 : Yes Yes Yes No
4/86
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules

6ES7 231-5PD30-0XB0 Analog value creation Measurement principle Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Interference voltage suppression for interference frequency f1 in Hz Errors/accuracies Cold connection point Temperature error (relative to input area) Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency Common mode interference, min. Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Monitoring the supply voltage to the electronics Wire break Diagnostic indication LED for status of the inputs for maintenance Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation 25C 0.1% to 55C 0.2% total measurement range Integrating 6ES7 231-5PF30-0XB0 Integrating
+/-1.5 C 25C 0.1% to 55C 0.2% total measurement range
120 dB
120 dB
Siemens ST 70 2011
4/87
Siemens AG 2011
SIMATIC S7-1200
Analog modules
6ES7 231-5PD30-0XB0 Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Yes Yes Yes Yes 6ES7 231-5PF30-0XB0 Yes Yes Yes Yes
Yes
Yes
Dimensions and weight Dimensions Width Height Depth Weight Weight, approx.
45 mm 100 mm 75 mm 220 g
100 mm 75 mm 220 g
Ordering data
SM 1231 RTD signal module 4 inputs for resistance temperature detectors Pt10/50/100/200/ 500/1000, Ni100/120/200/500/ 1000, Cu10/50/100, LG-Ni1000; resistance 150/300/600 Ohm, resolution 15 bit + sign 8 inputs for resistance temperature detectors Pt10/50/100/200/ 500/1000, Ni100/120/200/500/ 1000, Cu10/50/100, LG-Ni1000; resistance 150/300/600 Ohm, resolution 15 bit + sign Accessories Terminal block (spare part) for 8/16-channel analog signal modules with 7 screws, gold-plated; 4 units I Front flap set (spare part) for 8/16-channel signal modules S7-1200 automation system, sstem manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese
K K K K K K I
Order No. S7-1200 automation system, Easy Book Brief instructions German English
I K K K K K K
Order No.
6ES7 231-5PD30-0XB0
6ES7 231-5PF30-0XB0
French Spanish Italian Chinese STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7 Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
6ES7 292-1BG30-0XA0 6ES7 291-1BA30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
4/88
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SB 1231 RTD signal board
Overview
For the convenient recording of temperatures with great accuracy 1 input with 16-bit resolution Common resistance-type temperature detectors can be used Can easily be retrofitted to existing plant Can be plugged directly into the CPU
Product type designation Analog value creation Measurement principle Integrations and conversion time/ resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Interference voltage suppression for interference frequency f1 in Hz Errors/accuracies Temperature error (relative to input area) Interference voltage suppression for f = n x (fl +/- 1%), fl = interference frequency Common mode interference, min. Alarms/diagnostics/status information Alarms Alarms Diagnostic alarm Diagnostics Diagnostic functions Wire break Diagnostic indication LED For status of the inputs For maintenance Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation
6ES7 231-5PA30-0XB0 SB1231 AI 1xRTD Integrating
6ES7 231-5PA30-0XB0 Product type designation Supply voltages Rated value 24 V DC Current consumption Current consumption, typ. Connection method required front connector Analog inputs Number of analog inputs Permissible input frequency for current input (destruction limit), max. Technical unit for temperature measurement adjustable Input ranges Resistance thermometer Resistance Input ranges (rated values), voltages Input resistance (-80 mV to +80 mV) Input ranges (rated values), resistance thermometers Pt 100 Input resistance (Pt 100) Pt 1000 Input resistance (Pt 1000) Pt 200 Input resistance (Pt 200) Pt 500 Input resistance (Pt 500) Input ranges (rated values), resistors 0 to 150 Ohm 0 to 300 Ohm 0 to 600 Ohm Temperature compensation Temperature compensation parameterizable SB1231 AI 1xRTD
Yes 5 mA Yes 1; Resistance thermometer 35 V
120 dB
Yes Yes Yes; Can be read out Yes Yes Yes
Degrees Celsius/degrees Fahrenheit Yes; Platinum (Pt) Yes; 150 :, 300 :, 600 :
>=10 MOhm
0.3 m; Five times, in dispatch package -40C to +70C
Yes 100 : Yes 1 000 : Yes 200 : Yes 500 :
1080 to 660 hPa 95%
Yes Yes Yes No
0C to 55C horizontal mounting, 0C to 45C vertical mounting
Siemens ST 70 2011
4/89
Siemens AG 2011
SIMATIC S7-1200
Analog modules
SB 1231 RTD signal board

6ES7 231-5PA30-0XB0 Product type designation Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. SB1231 AI 1xRTD Yes Yes Yes Yes
Ordering data
SB 1231 RTD signal board 1 input for resistance temperature sensors Pt 100, Pt 200, Pt 500, Pt 1000, resolution 15 bit + sign Accessories Terminal block (spare part) for signal board with 6 screws, gold-plated; 4 units I S7-1200 automation system, system manual
I
Order No. 6ES7 231-5PA30-0XB0
6ES7 292-1BF30-0XA0
Yes
For SIMATIC S7-1200 and STEP 7 Basic German

K K K K K K
38 mm 62 mm 21 mm 35 g
English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
K K K K K K
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
4/90
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS analog modules
SIPLUS SM 1231 analog input module
Overview
SIPLUS SM 1231 Ambient conditions Relative humidity Biologically active substances Chemically active substances Mechanically active substances Air pressure (depending on the highest positive temperature range specified) 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
Analog inputs for SIPLUS S7-1200 With extremely short conversion times For connecting analog actuators and sensors without additional amplifiers Even solves more complex automation tasks From +60C to +70C, max. 50% of the inputs can be controlled simultaneously Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS SM 1231 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1231-4HD302XB0 -25 ... +70 C 6AG1231-4HD304XB0 0 ... +55 C
1)
2)
SA-S71.04 severity level GX: Long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm Limit value (max. 30 min/d): SO2 < 17.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!
Ordering data
SIPLUS SM 1231 analog input signal module (extended temperature range and medial exposure) Ambient temperature range 25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50% 4 analog inputs 10 V, 5 V, 2.5 V, or 0 ... 20 mA; 12 bit + sign Ambient temperature range 0 ... +55 C 4 analog inputs 10 V, 5 V, 2.5 V, or 0 ... 20 mA; 12 bit + sign Accessories
H I
Order No.
6ES7 231-4HD30-0XB0 Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for ambient conditions.
6AG1 231-4HD30-2XB0
6AG1 231-4HD30-4XB0
See SIMATIC S7-1200 SM 1231 analog input, page 4/70
Siemens ST 70 2011
4/91
Siemens AG 2011
SIMATIC S7-1200
SIPLUS SM 1232 analog output module
Overview
SIPLUS SM 1232 Ambient conditions Relative humidity Biologically active substances Chemically active substances Mechanically active substances Air pressure (depending on the highest positive temperature range specified) 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
Analog outputs for SIPLUS S7-1200 With extremely short conversion times For connecting analog actuators without additional amplifiers Even solves more complex automation tasks From +60 C to +70 C, max. 50% of the outputs can be controlled simultaneously
1)
2)
Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS SM 1232 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 232-4HB302XB0 -25 ... +70 C 6AG1 232-4HB304XB0 0 ... +55 C
Ordering data
SIPLUS SM 1232 analog output signal modules (extended temperature range and medial exposure) Ambient temperature range 25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50% 2 analog outputs, 10 V with 14 bit or 0 ... 20 mA with 13 bit Ambient temperature range 0 ... +55 C 2 analog outputs, 10 V with 14 bit or 0 ... 20 mA with 13 bit Accessories
H I
Order No.
6ES7 232-4HB30-0XB00 Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for ambient conditions.
6AG1 232-4HB30-2XB0
6AG1 232-4HB30-4XB0 See SIMATIC S7-1200 SM 1232 analog output, page 4/75
4/92
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS SB 1232 analog output module
Overview
SIPLUS SB 1232 Ambient conditions Relative humidity Biologically active substances Chemically active substances Mechanically active substances Air pressure (depending on the highest positive temperature range specified) 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
Analog output for SIPLUS S7-1200 Can be plugged directly into the CPU (cannot be used for +70 C version) Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
1)
2)

SIPLUS SB 1232 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 232-4HA304XB0 0 ... +55 C 6AG1 232-4HA305XB0 -25 ... +55 C
Ordering data
SIPLUS SB 1232 analog output signal board (extended temperature range and medial exposure) Ambient temperature range 25 ... +55 C 1 analog output, 10 V with 12 bit or 0 ... 20 mA with 11 bit Ambient temperature range 0 ... +55 C 1 analog output, 10 V with 12 bit or 0 ... 20 mA with 11 bit Accessories
H I
Order No.
6ES7 232-4HA30-0XB0 Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for ambient conditions.
6AG1 232-4HA30-5XB0
6AG1 232-4HA30-4XB0 See SIMATIC S7-1200 SB 1232 analog output, page 4/77
Siemens ST 70 2011
4/93
Siemens AG 2011
SIMATIC S7-1200
SIPLUS SM 1234 analog input/output module
Overview
SIPLUS SM 1231 Ambient conditions Relative humidity Biologically active substances Chemically active substances Mechanically active substances Air pressure (depending on the highest positive temperature range specified) 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX1 ) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
1)
Analog inputs and outputs for SIPLUS S7-1200 With extremely short conversion times For connecting analog actuators and sensors without additional amplifiers Even solves more complex automation tasks From +60 C to +70 C, max. 50% of the inputs and outputs can be controlled simultaneously Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS SM 1231 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 234-4HE302XB0 -25 ... +70 C 6AG1 234-4HE304XB0 0 ... +55 C
2)
Ordering data
SIPLUS SM 1234 analog input/ output signal modules (extended temperature range and medial exposure) Ambient temperature range 25 ... +70 C, from +60 +70 C number of simultaneously controllable inputs and outputs max. 50% 4 analog inputs, 10 V, 5 V, 2.5 V, or 0 ... 20 mA, 12 bit + sign; 2 analog outputs, 10 V with 14 bit or 0 ... 20 mA with 13 bit Ambient temperature range 0 ... +55 C 4 analog inputs, 10 V, 5 V, 2.5 V, or 0 ... 20 mA, 12 bit + sign; 2 analog outputs, 10 V with 14 bit or 0 ... 20 mA with 13 bit Accessories
H I
Order No.
6ES7 234-4HE30-0XB0 Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for ambient conditions.
6AG1 234-4HE30-2XB0
6AG1 234-4HE30-4XB0
See SIMATIC S7-1200 SM 1234 analog input/output, page 4/80
4/94
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Special modules
SIM 1274 simulator
Overview
Ordering data
Digital input simulator SIM 1274 simulator module (optional) with 14 input switches, for CPU 1214C with 8 input switches, for CPU 1211C, CPU 1212C Accessories S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions 6ES7 274-1XF300XA0 SIM 1274 8Ch DI simulator German English French Spanish Italian Yes Yes Yes Yes Chinese STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license
D STEP 7 Basic Software Update Service, 1 year K K K K K K K K K K K K I I
Order No.
6ES7 274-1XH30-0XA0 6ES7 274-1XF30-0XA0
4
Simulator module for program testing during commissioning and ongoing operation Simulation of 8 or 14 inputs
6ES7 274-1XH300XA0 Product type designation Supply voltages Rated value 24 V DC Degree of protection IP20 SIM 1274 14Ch DI simulator
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/95
Siemens AG 2011
SIMATIC S7-1200
Communication
CM 1241 communication module
Overview
For quick, high-performance serial data exchange via pointto-point connection Implemented protocols: ASCII, USS drive protocol, Modbus RTU Additional protocols can also be loaded Simple parameterization with STEP 7 Basic
6ES7 241-1CH30-0XB0 Product type designation Current consumption Current consumption, max. Power losses Power loss, typ. Interfaces Number of interfaces Interface physics, RS 232C (V.24) Interface physics, RS 422/RS 485 (X.27) Point-to-point Cable length, max. Integrated protocol driver ASCII USS Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) Temperature - Permissible temperature range Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Relative humidity - Permissible range (without condensation) at 25 C Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range - Permissible temperature change Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Yes 1 000 m Yes; available as library function Yes; available as library function 10 m Yes CM 1241 RS485 220 mA; from L5+; logic 1.1 W 1 6ES7 241-1AH30-0XB0 CM 1241 RS232 220 mA; from L5+; logic 1.1 W 1 Yes
0C to 55C horizontal mounting 0 C to 45 C vertical mounting 5C to 55C, 3C / minute 1080 to 795 hPa
0C to 55C horizontal mounting 0 C to 45 C vertical mounting 5C to 55C, 3C / minute 1080 to 795 hPa
4/96
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Communication
CM 1241 communication module

6ES7 241-1CH30-0XB0 Software Runtime software Target system - S7-1200 Dimensions and weight Dimensions Width Height Depth Weight Weight, approx. 6ES7 241-1AH30-0XB0
Yes
Yes
30 mm 100 mm 75 mm 150 g
30 mm 100 mm 75 mm 150 g
4
Order No.
Ordering data
CM 1241 communication module Communication module for point- I to-point connection, with one RS485 interface Communication module for point- I to-point connection, with one RS232 interface Accessories S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
K K K K K K K K K K K K
Order No. STEP 7 Basic V11 engineering software 6ES7 241-1CH30-0XB0 Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license 6ES7 298-8FA30-8AQ0 6ES7 298-8FA30-8BQ0 6ES7 298-8FA30-8CQ0 6ES7 298-8FA30-8DQ0 6ES7 298-8FA30-8EQ0 6ES7 298-8FA30-8KQ0
6ES7 241-1AH30-0XB0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/97
Siemens AG 2011
SIMATIC S7-1200
Communication
RS485 CB 1241 communication board
Overview
For fast, high-performance serial data exchange via point-topoint connection Implemented protocols: ASCII, USS drive protocol, Modbus RTU Additional protocols can be loaded later Simple parameterization with STEP 7 Basic Can be plugged directly into the CPU
Product type designation Current consumption from backplane bus 5 V DC, typ. Power losses Power loss, typ. Alarms/diagnostics/status information Diagnostics Diagnostic functions Diagnostic indication LED For status of the outputs
6ES7 241-1CH30-1XB0 CB 1241 RS485 50 mA 1.5 W
Product type designation Mechanical and climatic conditions during operation Climatic conditions in operation Temperature - Permissible temperature range - Permissible temperature change Air pressure acc. to IEC 60068-2-13 - Permissible air pressure Pollutant concentrations - SO2 at RH < 60% without condensation Degree of protection IP20 Standards, approvals, certificates CE mark C-TICK FM approval Mechanics/material Type of housing (front) Plastic Dimensions and weight Dimensions Width Height Depth Weight Weight, approx.
6ES7 241-1CH30-1XB0 CB 1241 RS485
0C to 55C horizontal mounting 0 C to 45 C vertical mounting 5C to 55C, 3C / minute
Yes Yes
Climatic and mechanical conditions for storage and transport Climatic conditions for storage and transport Free fall - Drop height, max. (in packaging) 0.3 m; Five times, in dispatch package Temperature - Permissible temperature range -40C to +70C Air pressure acc. to IEC 60068-2-13 - Permissible air pressure 1080 to 660 hPa Relative humidity - Permissible range (without 95% condensation) at 25 C
Yes
38 mm 62 mm 21 mm 40 g
4/98
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Communication
RS485 CB 1241 communication board
Ordering data
RS485 CB 1241 communication board for point-to-point connection, with 1 RS485 interface Accessories Terminal block (spare part) for signal board with 6 screws, gold-plated; 4 units I S7-1200 automation system, system manual For SIMATIC S7-1200 and STEP 7 Basic German English French Spanish Italian Chinese S7-1200 automation system, Easy Book Brief instructions German English French Spanish Italian Chinese
Order No. 6ES7 241-1CH30-1XB0 STEP 7 Basic V11 engineering software Target system: SIMATIC S7-1200 controllers and the associated I/O. Requirements: Windows XP Home SP3, Windows XP Professional SP3 (32 bit), Windows 7 Home Premium, Windows 7Professional (32 bit), Windows 7 Enterprise (32 bit), Windows 7 Ultimate (32 bit), Microsoft Server 2003 R2 Std. SP2 (32 bit), Microsoft Server 2008 Std. SP2 (32 bit) Type of delivery: German, English, Chinese, Italian, French, Spanish Single license Upgrade STEP 7 Basic V10.5 to STEP 7 Basic V11, single license Powerpack STEP 7 Basic V11 to STEP 7 Prof. V11, floating license STEP 7 Basic V11, trial license 6ES7 298-8FA30-8AQ0 6ES7 298-8FA30-8BQ0 6ES7 298-8FA30-8CQ0 6ES7 298-8FA30-8DQ0 6ES7 298-8FA30-8EQ0 6ES7 298-8FA30-8KQ0
Order No.
6ES7 292-1BF30-0XA0
6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0
Siemens ST 70 2011
4/99
Siemens AG 2011
SIMATIC S7-1200
Communication
CM 1242-5
Overview
Order No. Product type designation Transmission rate Transmission rate at interface 1 in accordance with PROFIBUS Interfaces Number of electrical connections at interface 1 in accordance with PROFIBUS for power supply Design of electrical connection at interface 1 in accordance with PROFIBUS for power supply Supply voltage, current consumption, power loss 1 0 9-pin D-sub socket (RS485) 9.6 Kbit/s 12 Mbit/s 6GK7 242-5DX30-0XE0
The CM 1242-5 communication module is used to connect a SIMATIC S7-1200 to PROFIBUS as a DP slave and has the following characteristics: PROFIBUS DPV1 slave in accordance with IEC 61158 Module replacement without PG supported Power is supplied via the backplane bus so that no extra cabling is required Support of all standard baud rates from 9.6 Kbit/s to 12 Mbit/s Compact industry-standard enclosure in S7-1200 design for mounting on a standard mounting rail Fast commissioning thanks to easy configuration using STEP 7 without additional programming effort The CM 1242-5 is intended for use in factory automation. Lowcost PROFIBUS-based automation solutions can be created on the basis of the S7-1200 for optimal production.
Type of power supply Supply voltage 1 from backplane bus External Relative positive tolerance at 24 V DC Relative negative tolerance at 24 V DC Current consumed from backplane bus at 5 V DC, typical from external power supply at 24 V DC - Typical - Maximum Effective power loss Permitted ambient conditions Ambient temperature During operation - Minimum - Maximum During storage During transport Note Relative humidity at 25 C without condensation during operation, maximum IP degree of protection Design, dimensions and weights Module format Width Height Depth Net weight
DC 5V -
0.15 A
0.75 W
-40 +70 C -40 +70 C 95%
IP 20 S7-1200 compact module, single width 30 mm 100 mm 75 mm 0.12 kg
4/100
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Communication
CM 1242-5

Order No. Product properties, functions, components in general Maximum number of modules per CPU Number of modules - Note Performance data Performance data open communication Number of possible connections for open communication by means of SEND/RECEIVE blocks, maximum Data volume as user data per connection for open communication by means of SEND/RECEIVE blocks, maximum Performance data PROFIBUS DP Service as DP master DPV0 Number of DP slaves that can be operated on DP master Data volume of address area of the inputs as DP master, total of address area of the outputs as DP master, total of address area of the inputs per DP slave of address area of the outputs per DP slave of address area of the diagnostic data per DP slave Service as DP slave DPV0 DPV1 Data volume of address area of the inputs as DP slave, total of address area of the outputs as DP slave, total Performance data S7 communication Number of possible connections for S7 communication Maximum For PG connections, maximum Maximum with PG/OP connections Note Performance data multiprotocol operation Number of active connections in multiprotocol mode Maximum without DP Maximum with DP Product functionsManagement, configuration, programming Configuration software required STEP 7 Basic V11.0 or higher 3 6GK7 242-5DX30-0XE0
Ordering data
CM 1242-5 communication module Communication module for electrical connection of SIMATIC S7-1200 to PROFIBUS as a DPV1 slave Accessories RS485 PROFIBUS FastConnect connector With 90 cable outlet; insulation displacement technology, max. transmission rate 12 Mbit/s Without PG interface With PG interface PROFIBUS FC standard cable 2-core bus cable, shielded, special design for fast mounting, delivery unit: max. 1000 m, minimum order 20 m, sold by the meter PROFIBUS FastConnect stripping tool
Order No.
6GK7 242-5DX30-0XE0
4
6ES7 972-0BA52-0XA0 6ES7 972-0BB52-0XA0 6XV1 830-0EH10
Stripping tool for fast stripping of the PROFIBUS FastConnect bus cable 12M PROFIBUS bus terminal Bus terminal for connection of PROFIBUS nodes at up to 12 Mbit/s with connecting cable
6GK1 905-6AA00
6GK1 500-0AA10
Yes 240 byte 240 byte
Siemens ST 70 2011
4/101
Siemens AG 2011
SIMATIC S7-1200
Communication
CM 1243-5
Overview
Order No. Product type designation Transmission rate Transmission rate at interface 1 in accordance with PROFIBUS Interfaces Number of electrical connections at interface 1 in accordance with PROFIBUS for power supply Design of electrical connection at interface 1 in accordance with PROFIBUS for power supply Supply voltage, current consumption, power loss 1 1 9-pin D-sub socket (RS485) 3-pin terminal strip 9.6 Kbit/s 12 Mbit/s 6GK7 243-5DX30-0XE0
The CM 1243-5 communication module is used to connect a SIMATIC S7-1200 to PROFIBUS as a DP master and has the following characteristics: PROFIBUS DPV1 master in accordance with IEC 61158 Support of up to 16 PROFIBUS DP slaves Communication with other S7 controllers based on S7 communication Allows the connection of programming devices and operator panels with a PROFIBUS interface to the S7-1200 Module replacement without PG supported Support of all standard baud rates from 9.6 Kbit/s to 12 Mbit/s Compact industry-standard enclosure in S7-1200 design for mounting on a standard mounting rail Fast commissioning thanks to easy configuration using STEP 7 without additional programming overhead The CM 1243-5 is intended for use in factory automation. Lowcost PROFIBUS-based automation solutions can be created on the basis of the S7-1200 for optimal production.
Type of power supply Supply voltage 1 from backplane bus External Relative positive tolerance at 24 V DC Relative negative tolerance at 24 V DC Current consumed from backplane bus at 5 V DC, typical from external power supply at 24 V DC - Typical - Maximum Effective power loss Permitted ambient conditions Ambient temperature for vertical installation - during operating phase for horizontal installation - during operating phase during storaget during transport Relative humidity at 25 C without condensation during operation, maximum IP degree of protection Design, dimensions and weights Module format Width Height Depth Net weight
DC 24 V 20 % 20%
0A
0.1 A 2.4 W
0 45C 0 55C -40 +70 C -40 +70 C 95 %
IP 20 S7-1200 compact module, single width 30 mm 100 mm 75 mm 0.14 kg
4/102
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Communication
CM 1243-5

Order No. Product properties, functions, components in general Number of modules Per CPU, maximum Note Performance data Performance data open communication Number of possible connections for open communication by means of SEND/RECEIVE blocks, maximum Data volume as user data per connection for open communication by means of SEND/RECEIVE blocks, maximum Performance data PROFIBUS DP Service as DP master DPV0 Number of DP slaves that can be operated on DP master Data volume of address area of the inputs as DP master, total of address area of the outputs as DP master, total of address area of the inputs per DP slave of address area of the outputs per DP slave of address area of the diagnostic data per DP slave Service as DP slave DPV0 DPV1 Data volume of address area of the inputs as DP slave, total of address area of the outputs as DP slave, total Performance data S7 communication Number of possible connections for S7 communication Maximum For PG connections, maximum For PG/OP connections, maximum Note Performance data multiprotocol operation Number of active connections in multiprotocol mode Maximum without DP Maximum with DP Product functions Management, configuration, programming Configuration software required STEP 7 Basic V11.0 or higher 16 1 6GK7 243-5DX30-0XE0
Ordering data
CM 1243-5 communication module Communication module for electrical connection of SIMATIC S7-1200 to PROFIBUS as a DPV1 master Accessories RS485 PROFIBUS FastConnect connector With 90 cable outlet; insulation displacement technology, max. transmission rate 12 Mbit/s Without PG interface With PG interface PROFIBUS FC standard cable 2-core bus cable, shielded, special design for fast mounting, delivery unit: max. 1000 m, minimum order 20 m, sold by the meter PROFIBUS FastConnect stripping tool
Order No.
6GK7 243-5DX30-0XE0
4
6ES7 972-0BA52-0XA0 6ES7 972-0BB52-0XA0 6XV1 830-0EH10
512 byte 512 byte 244 byte 244 byte 240 byte
Stripping tool for fast stripping of the PROFIBUS FastConnect bus cable 12M PROFIBUS bus terminal Bus terminal for connection of PROFIBUS nodes at up to 12 Mbit/s with connecting cable
6GK1 905-6AA00
6GK1 500-0AA10
8 1 3 max. 4 connections to other S7 stations
8 8
Siemens ST 70 2011
4/103
Siemens AG 2011
SIMATIC S7-1200
Communication
CSM 1277 unmanaged
Overview
Order number Product type designation Data transmission rate Transmission rate 1 Transmission rate 2 Interfaces Maximum number of electrical/ optical connections for network components or terminal equipment 4 10 Mbit/s 100 Mbit/s 6GK7 277-1AA00-0AA0 CSM 1277
Number of electrical connections For network components or terminal equipment For signal contact For power supply Design of electrical connection For network components or terminal equipment For signal contact For power supply Supply voltage, current consumption, power loss Type of power supply Supply voltage, external Minimum Maximum Current consumption, maximum Product component: fusing of power supply input
4 1 RJ45 port 3-pin terminal block
Unmanaged switch for connecting a SIMATIC S7-1200 to an Industrial Ethernet network with a line, tree or star topology Multiplication of Ethernet interfaces on a SIMATIC S7-1200 for additional connection of up to three programming devices, operator controls, and further Ethernet nodes Simple, space-saving mounting on the SIMATIC S7-1200 mounting rail Low-cost solution for implementing small, local Ethernet networks Connection without any problems using RJ45 standard connectors Simple and fast status display via LEDs on the device Integral autocrossover function permits use of uncrossed connecting cables
DC 24 V 19.2 V 28.8 V 0.07 A Yes
Type of fusing of power supply input 0.5 A / 60 V Effective power loss at 24 V with DC 1.6 W Permitted ambient conditions Ambient temperature During operating phase During storage During transport Relative humidity at 25 C without condensation during operating phase, maximum IP degree of protection Design, dimensions and weights Type of construction Width Height Depth Net weight Type of mounting 35 mm DIN rail mounting Wall mounting S7-300 rail mounting SIMATIC S7-1200 device design 45 mm 100 mm 75 mm 0.15 kg Yes Yes No 0 60 C -40 +70 C -40 +70 C 95 %
IP20
4/104
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Communication
CSM 1277 unmanaged

Order number Product properties, functions, components in general Cascading with star topology Product function: switch-managed Standards, specifications, approvals Standard For EMC from FM For Ex zone FM3611: Class 1, Division 2, Group A, B, C, D / T.., CL.1, Zone 2, GP. IIC, T.. Ta EN 600079-15:2005, EN 600079-0:2006, II 3 G Ex nA II T4, KEMA 08 ATEX 0003 X UL 508, CSA C22.2 No. 142 EN 61000-6-4 (Class A) EN 61000-6-2 EN 61000-6-2, EN 61000-6-4 Yes Yes No 6GK7 277-1AA00-0AA0
Ordering data
CSM 1277 compact switch module Unmanaged switch for connecting a SIMATIC S7-1200 and up to three further nodes to Industrial Ethernet with 10/100 Mbit/s; 4 x RJ45 ports; external 24 V DC power supply, diagnostics on LEDs, S7-1200 module including electronic manual on CD-ROM Accessories IE TP Cord RJ45/RJ45 TP cable 4 x 2 with 2 RJ45 connectors 0.5 m 1m 2m 6m 10 m IE FC Outlet RJ45 For connecting Industrial Ethernet FC cables and TP cords; graduated prices for 10 and 50 units or more
Order No.
6GK7 277-1AA10-0AA0
4
6XV1 870-3QE50 6XV1 870-3QH10 6XV1 870-3QH20 6XV1 870-3QH60 6XV1 870-3QN10 6GK1 901-1FC00 0AA0
For CSA and UL safety For Ex zone of CSA and UL For emitted interference For noise immunity Certificate of suitability CE mark C-Tick
Siemens ST 70 2011
4/105
Siemens AG 2011
SIMATIC S7-1200
Communication
SIPLUS NET CSM 1277
Overview
SIPLUS NET CSM 1277 Order number Order number based on Ambient temperature range Ambient conditions 6AG1 277-1AA00-4AA0 6GK7 277-1AA00-0AA0 0 ... +55 C Suitable for exceptional medial exposure (e.g. in sulfur chloride atmosphere). The technical data of the standard product applies except for the ambient conditions.
Technical data
Ambient conditions Relative humidity Biologically active substances 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2) Conformity with EN 60721-3-3, Class 3S4 including sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
Unmanaged switch for connection of SIPLUS S7-1200 to an Industrial Ethernet network with a line, tree or star topology Multiplication of Ethernet interfaces on a SIPLUS S7-1200 for additional connection of up to three programming devices, operator controls, and further Ethernet nodes Simple, space-saving mounting on the SIPLUS S7-1200 rail Low-cost solution for implementing small, local Ethernet networks Problem-free connection using RJ45 standard connectors Simple and fast status display via LEDs on the device Integral autocrossover function permits use of uncrossed connecting cables Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
Mechanically active substances Air pressure (depending on the highest positive temperature range specified)
1)
ISA-S71.04 severity level GX: Long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm Limit value (max. 30 min/d): SO2 < 14.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm 2) The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!
For further technical documentation on SIPLUS, see: www.siemens.com/siplus-extreme
Ordering data
SIPLUS NET CSM 1277 compact switch module (extended temperature range and medial exposure) Unmanaged switch for connection of SIPLUS S7-1200 and up to three further nodes to Industrial Ethernet with 10/100 Mbit/s; 4 x RJ45 ports; external 24 V DC power supply, LED diagnostics, S7-1200 module including electronic Manual on CD-ROM
Order No. See CSM 1277 unmanaged, page 4/105
6AG1 277-1AA00-4AA0
4/106
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Communication
CP 1242-7
Overview
Order No. Product type designation Transmission rate Transmission rate for GPRS transmission on uplink Minimum Maximum Transmission rate for GPRS transmission on downlink Minimum Maximum Wireless technology Type of mobile wireless service supported SMS GPRS 6GK7 242-7KX30-0XE0
43 Kbit/s
86 Kbit/s
Yes Yes
The CP 1242-7 communication processor is used to connect a SIMATIC S7-1200 to the globally widespread GSM/GPRS mobile radio network and has the following characteristics: Worldwide wireless exchange of data between S7-1200 controllers and/or between S7-1200 controllers and control centers with an Internet connection Communication based on the GPRS (General Packet Radio Service) mobile wireless service with data transmission speeds of up to 86 Kbit/s in the downlink and 43 Kbit/s in the uplink GPRS mode with fixed IP addresses and dynamic IP addresses with standard mobile phone contract Time synchronization on the basis of NTP (Network Time Protocol) On-demand connection buildup via voice call or text message Sending and receiving of text messages Clearly laid out LED signaling for fast and easy diagnostics Compact industrial enclosure in S7-1200 design for mounting on a standard mounting rail Fast commissioning thanks to easy configuration using STEP 7 In conjunction with the "Telecontrol Server Basic" software, the CP 1242-7 forms a telecontrol system with further properties: Connection of up to 5000 telecontrol stations to the control center via an OPC interface Data buffering in the substations in the event of connection failures Central status monitoring of the substations No special provider services required for fixed IP addresses Teleservice access with STEP 7 to the substations via Internet
Type of mobile wireless network supported GSM UMTS Type of mobile wireless service note Operating frequency 850 MHz 900 MHz 1800 MHz 1900 MHz Transmit power At operating frequency 850 MHz At operating frequency 900 MHz At operating frequency 1800 MHz At operating frequency 1900 MHz Interfaces Number of electrical connections for external antenna(s) for power supply Number of slots for SIM cards Design of electrical connection for external antenna(s) for power supply Design of SIM card slot Supply voltage, current consumption, power loss Type of power supply External power supply Relative positive tolerance at 24 V DC Relative negative tolerance at 24 V DC Current input from external power supply at 24 V DC Typical Maximum Effective power loss
Yes GPRS (Multislot Class 10)
Yes Yes Yes Yes 2W 2W 1W 1W
1 1 1 SMA socket (50 Ohm) 3-pin terminal strip Slot under front flap
DC 24 V 20% 20 %
0.1 A 0.22 A 2.5 W
Siemens ST 70 2011
4/107
Siemens AG 2011
SIMATIC S7-1200
Communication
CP 1242-7

Order No. Permitted ambient conditions Ambient temperature For vertical installation - During operation For horizontal installation - During operation During storage During transport Note Relative humidity at 25 C without condensation during operating phase, maximum IP degree of protection Design, dimensions and weights Module format Width Height Depth Net weight Product properties, functions, components in general Maximum number of modules per CPU Number of modules - Note Performance data Performance data open communication Number of possible connections for open communication by means of TC blocks, maximum Data volume as user data per send call, maximum Performance data S7 communication Number of possible connections for S7 communication Maximum For PG connections, maximum For PG/OP connections, maximum Note 4 3 S7-1200 compact module, single width 30 mm 100 mm 75 mm 0.14 kg 6GK7 242-7KX30-0XE0 Order No. Performance data Telecontrol Connection to the control center Note 0 45 C 0 55 C -40 +70 C -40 +70 C 95 % Telecontrol Server Basic Connection to Scada system by means of OPC interface with automatic connection buildup is supported with connection buildup as is supported required No No Yes up to 1000 message frames 1 024 byte 6GK7 242-7KX30-0XE0
Protocol is supported DNP3 IEC 60870-5 Product function: data buffering if connection is aborted Note Data volume as user data per station in telecontrol mode, maximum Performance data Teleservice Diagnostics function: online diagnostics with SIMATIC STEP 7 Product function: program download with SIMATIC STEP 7 Product function: remote firmware update Product functions Management, configuration, programming Configuration software required Product functions Security Product function: password protection for teleservice access Product function: encrypted data transmission
IP 20
Yes Yes No
STEP 7 Basic V11.0 or higher Yes Yes
2 048 byte
Ordering data
CP 1242-7 communication processor Communication processor for connecting SIMATIC S7-1200 to GSM/GPRS mobile wireless network Accessories Telecontrol Server Basic Software for License for up to 8 stations License for up to 64 stations License for up to 256 stations License for up to 1000 stations License for up to 5000 stations
J J J J J
Order No. ANT794-4MR antenna GSM quad band antenna 6GK7 242-7KX30-0XE0 ANT794-3M antenna GSM quad band antenna
Order No.
6NH9 860-1AA00 6NH9 870-1AA00
6NH9 910-0AA20-0AA0 6NH9 910-0AA20-0AB0 6NH9 910-0AA20-0AC0 6NH9 910-0AA20-0AD0 6NH9 910-0AA20-0AE0 J: Subject to export regulations AL: N and ECCN: EAR99S
4/108
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS communication
SIPLUS CM 1241 communication module
Overview
Ambient conditions Relative humidity Biologically active substances 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust 2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
For fast, high-performance serial data exchange via point-topoint coupling Implemented protocols: ASCII, USS drive protocol, Modbus RTU Additional protocols can also be loaded Simple parameterization with STEP 7 Basic Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS CM 1241 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 241-1AH302XB0 -25 ... +70 C 6AG1 241-1AH304XB0 0 ... +55 C
1)
2)
Ordering data
SIPLUS CM 1241 communication module (extended temperature range and medial exposure) Ambient temperature 25 ... +70 C Communication module for point- I to-point connection, with one RS485 interface Communication module for point- I to-point connection, with one RS232 interface Suitable for areas with extraordinary medial exposure (conformal coating) Communication module for point- H to-point connection, with one RS485 interface Communication module for point- H to-point connection, with one RS232 interface Accessories 6ES7 241-1AH30-0XB0 Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions.
Order No.
6AG1 241-1CH30-2XB0
6AG1 241-1AH30-2XB0
SIPLUS CM 1241 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 241-1CH302XB0 -25 ... +70 C 6AG1 241-1CH304XB0 0 ... +55 C
6ES7 241-1CH30-0XB0 Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions.
6AG1 241-1CH30-4XB0
6AG1 241-1AH30-4XB0
See SIMATIC S7-1200 CM 1241 communication module, page 4/97
Siemens ST 70 2011
4/109
Siemens AG 2011
SIMATIC S7-1200
Power supplies
SIMATIC S7-1200 PM 1207
Overview
The power supply PM1207 (Power Module) is optimized for the new SIMATIC S7-1200 controllers in terms of design and functionality and serves as an external supply for the inputs and outputs which, to prevent an imbalance, must not be drawn from the CPU encoder supply.
Power supply, type Order number Input Rated voltage value Uin rated Voltage range Overvoltage strength Mains buffering at Iout rated Rated line frequency, rated linefrequency range Rated current Iin rated I2 t Built-in incoming fuse Recommended miniature circuit breaker (IEC 898) in the mains power input Output Rated voltage Uout rated Total tolerance Static line smoothing Static load smoothing Residual ripple Spikes (bandwidth: 20 MHz) Adjustment range Status indicator On/Off behavior Startup delay/voltage rise Rated current Iout rated 120/230 V AC Automatic range switchover 85 ... 132 V/176 ... 264 V 2.3 x Uin rated, 1.3 ms > 20 ms at Uin = 93/187 V 50/60 Hz; 47 ... 63 Hz 1.2/0.67 A < 0.5 A2s T 3.15 A/250 V (not accessible) 16 A, characteristic B; 10 A, characteristic C Controlled, isolated DC voltage 24 V DC 3 % Approx. 0.1 % Approx. 0.2 % < 150 mVpp < 240 mVpp 24 V OK = green LED No overshoot of Uout (soft start) < 2 (6) s at 230 (120) V/typ. 10 ms 2.5 A 2.5 A 6EP1 332-1SH711) Power supply, type Order number Current range Up to +60 C Derating Dynamic overcurrent on Power-up on short-circuit Short-circuit during operation Parallel switching for enhanced performance Efficiency Efficiency at Uout rated,Iout rated Power loss at Uout rated,Iout rated Closed-loop control Dyn. mains compensation (Uin rated 15%) Dynamic load smoothing (Iout: 50/100/50 %) Load step settling time 50 to 100 % 100 to 50% Protection and monitoring Output overvoltage protection Current limitation Short-circuit protection Sustained short-circuit current rms value Overload/short-circuit indicator < 33 V 2.65 A Constant current characteristic Typ. 0.3 % Uout Typ. 3% Uout Approx. 83% Approx. 12 W 2.5 A 6EP1 332-1SH711) 0 ... 2.5 A Typ. 6 A for 100 ms Typ. 6 A for 100 ms Yes, two units
Switch-on current limitation (+25 C) < 13 A, < 3 ms (Uin = 230 V)
< 5 ms < 5 ms
4/110
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Power supplies
SIMATIC S7-1200 PM 1207

Power supply, type Order number Safety Primary/secondary isolation Yes, safety extra low output voltage according to EN 60950-1 and EN 50178 Class I < 3.5 mA Yes Yes cULus-listed (UL 508, CSA C22.2 No. 107.1) File E197259; cULus-recognized (UL 60950-1, CSA C22.2 No. 60950-1), File E151273 ATEX (available soon) GL, ABS, DNV, NK IP20 EN 55022 Class B Not applicable EN 61000-6-2 0 ... +60 C with natural convection -40 ... +85C Climate class 3K3 according to EN 60721, no condensation 2.5 A 6EP1 332-1SH711)
Ordering data
SIMATIC S7-1200 PM 1207 Input 120/230 V AC, output 24 V DC/2.5 A SIMATIC S7-1200 PM 1207 (Extended temperature range and medial exposure, -25 ... +70C)
L
Order No. 6EP1 332-1SH71
6AG1 332-1SH71-7AA0
Protection class Leakage current Safety test CE marking UL/cUL (CSA) approval
L: Subject to export regulations AL: 9I999 and ECCN: N
Further information
The perfectly matched, complete SITOP range includes different switch mode power supply series in addition to a unique range of add-on modules, which can be used to additionally protect the 24 V power supply against faults on the primary and secondary side - all the way to complete protection: Redundancy module for setting up a redundant power supply Uninterruptible 24 V power supplies with batteries or maintenance-free capacitors for continued operation in the event of a power failure Selectivity modules for the electronic protection of 24 V feeders against overload and short circuits More information can be found in the KT 10.1 Catalog and in the Internet at www.siemens.com/sitop
Protection against explosion FM approval Marine approval Degree of protection (EN 60529) EMC Emitted interference Supply harmonics limitation Noise immunity Operating data Ambient temperature range Transport and storage temperature range Humidity class Mechanics Connections Supply input L, N, PE Output + Output Dimensions (W x H x D) in mm Weight, approx. Mounting
One screw-type terminal each for 0.5 ... 2.5 mm2 2 screw-type terminals each for 0.5 ... 2.5 mm2 2 screw-type terminals each for 0.5 ... 2.5 mm2 70 x 100 x 75 0.3 kg Can be snapped onto standard mounting rail EN 60715 DC 35x7.5/15, wall mounting
1)
SIPLUS module 6AG1 332-1SH71-7AA0 for extended temperature range -25 C to +70 C, derating from +55 C to +70 C to 1.5 A output current. Suitable for use under medial load (e.g. sulfur chloride atmosphere).
Siemens ST 70 2011
4/111
Siemens AG 2011
SIMATIC S7-1200
SIPLUS power supplies
SIPLUS PM 1207 power supplies
Overview
SIPLUS power supply PM 1207 Ambient conditions Relative humidity Biologically active substances Chemically active substances Mechanically active substances Air pressure (depending on the highest positive temperature range specified) 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
Stabilized power supply for SIPLUS S7-1200 In the S7-1200 design Input 120/230 V AC, output 24 V DC, 2.5 A (derating: 1.5 A from 60 C) Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS power supply PM 1207 Order number Order No. based on Ambient temperature range Conformal coating Technical data 6AG1 332-1SH714AA0 6EP1 332-1SH71 0 ... +60 C -25 ... +70 C Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for the ambient conditions. 6AG1 332-1SH717AA0
1)
2)
Ordering data
SIPLUS PM 1207 power supply (extended temperature range and medial exposure) Input 120/230 V AC, output 24 V DC, 2.5 A; derating from + 55 C to + 70 C to 1.2 A output current Ambient temperature -25 ... +70 C Ambient temperature 0 ... +60 C
L
Order No.
6AG1 332-1SH71- 7AA0 6AG1 332-1SH71- 4AA0
L: Subject to export regulations AL: 9I999 and ECCN: N
4/112
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Operator control and monitoring
Basic panels - Standard
Overview
The ideal entry level series of 3.8" to 15" for operating and monitoring compact machines and plants Clear process representation thanks to use of pixel-graphics displays Intuitive operation using Touch and tactile function keys Equipped with all the necessary basic functions such as alarm logging, recipe management, plots, vector graphics, and language switching Simple connection to the controller via integral Ethernet interface or separate version with RS485/422
6AV6 647-0AA11-3AX0 Product type designation Supply voltage Supply voltage Permissible range Rated current Memory Type Usable memory for user data Protocols Protocols (terminal link) Sm@rtAccess Configuration Configuration tool SIMATIC HMI KTP400 Basic mono PN 24 V DC +19.2 V to +28.8 V DC 0.07 A Flash / RAM 512 kbyte usable memory for user data 6AV6 647-0AB11-3AX0 SIMATIC HMI KTP600 Basic mono PN 24 V DC +19.2 V to +28.8 V DC 0.24 A Flash / RAM 512 kbyte usable memory for user data 6AV6 647-0AC11-3AX0 SIMATIC HMI KTP600 Basic color DP 24 V DC +19.2 V to +28.8 V DC 0.35 A Flash / RAM 512 kbyte usable memory for user data 6AV6 647-0AD11-3AX0 SIMATIC HMI KTP600 Basic color PN 24 V DC +19.2 V to +28.8 V DC 0.35 A Flash / RAM 512 kbyte usable memory for user data
No WinCC flexible Compact Version 2008 SP1 or higher (to be ordered separately) STN, gray scales 3.8" (76.8 mm x 57.6 mm) 320 x 240 Approx. 30000 hours
No WinCC flexible Compact Version 2008 SP1 or higher (to be ordered separately) STN, gray scales 5.7" (115.2 mm x 86.4 mm) 320 x 240 about 50,000 hours
No WinCC flexible Compact Version 2008 SP1 or higher (to be ordered separately) TFT, 256 Farben 5.7" (115.2 mm x 86.4 mm) 320 x 240 about 50,000 hours
No WinCC flexible Compact Version 2008 SP1 or higher (to be ordered separately) TFT, 256 Farben 5.7" (115.2 mm x 86.4 mm) 320 x 240 about 50,000 hours
Display Display type Size Resolution (WxH in pixel) Backlighting MTBF backlighting (at 25 C) Operating mode Control elements Function keys, programmable Connection for mouse/ keyboard/barcode reader
Membrane keyboard 4 function keys -/-/-
Siemens ST 70 2011
4/113
Siemens AG 2011
SIMATIC S7-1200

6AV6 647-0AA11-3AX0 Touch operation Touch screen Numeric/alphabetical input Ambient conditions Mounting position Maximum permissible angle of inclination without external ventilation analog, resistive Yes (on-screen keyboard) / Yes (on-screen keyboard) vertical +/- 35 6AV6 647-0AB11-3AX0 analog, resistive Yes (on-screen keyboard) / Yes (on-screen keyboard) vertical +/- 35 6AV6 647-0AC11-3AX0 analog, resistive Yes (on-screen keyboard) / Yes (on-screen keyboard) vertical +/- 35 6AV6 647-0AD11-3AX0 analog, resistive Yes (on-screen keyboard) / Yes (on-screen keyboard) vertical +/- 35
Max. relative humidity Temperature Operation (vertical installation) Operation (max. tilt angle) Transport, storage Degree of protection Front Rear Certifications & standards Certifications I/O I/O devices Type of output LED colors Acoustics Interfaces Interfaces PC card slot CF card slot Multi Media Card slot USB port Industrial Ethernet interface Processor Processor Functionality under WinCC flexible/ WinCC Basic Applications/options Number of Visual Basic Scripts Task planner Help system Status/control With alarm logging system (incl. buffer and acknowledgment) Number of messages Bit messages Analog messages Message buffer
90 % 0 C to +50 C 0 C to +40 C -20 C to +60 C IP65, NEMA 4, NEMA 4x, NEMA 12 (when installed) IP20 CE, UL, cULus, NEMA 4, NEMA 4x, NEMA 12 None None Sound signal 1 x Ethernet (RJ45) No No No No 1 x Ethernet (RJ45) RISC 32 bit, 75 MHz
90 % 0 C to +50 C 0 C to +40 C -20 C to +60 C IP65, NEMA 4, NEMA 4x, NEMA 12 (when installed) IP20 CE, UL, cULus, NEMA 4, NEMA 4x, NEMA 12 None None Sound signal 1 x RS422,1 x RS485 (max. 12 Mbit/s) No No No No No RISC 32 bit, 75 MHz
None Not possible Yes Yes Not possible
200 Yes Yes Ring buffer (n x 256 entries), retentive, maintenance-free
4/114
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200

6AV6 647-0AA11-3AX0 Recipes Recipes Data records per recipe Entries per data record Recipe memory Number of process images Process images Variables Limit values Multiplexing Image elements Text objects Graphics object dynamic objects Lists Text lists Graphics list Libraries Security Number of user groups Passwords exportable Number of user rights Data carrier support PC card CF card Multi Media Card Recording Recording/Printing Fonts Keyboard fonts Languages Online languages Configuration languages 5 20 20 40 kbyte integrated Flash 50 250 Yes Yes 500 text elements Bit maps, icons, icon (fullscreen), vector graphics Diagrams, bar graphs 150 100 Yes 50 No 32 No No No US American (English) 5 D, GB, F, I, E, CHN "traditional", CHN "simplified", DK, FIN, GR, J, KP / ROK, NL, N, PL, P, RUS, S, CZ / SK, TR, H Tahoma, WinCC flexible Standard, symbol languages Ethernet, automatic transfer recognition 6AV6 647-0AB11-3AX0 5 20 20 40 kbyte integrated Flash 50 500 Yes Yes 500 text elements Bit maps, icons, icon (fullscreen), vector graphics Diagrams, bar graphs 150 100 Yes 50 No 32 No No No US American (English) 5 D, GB, F, I, E, CHN "traditional", CHN "simplified", DK, FIN, GR, J, KP / ROK, NL, N, PL, P, RUS, S, CZ / SK, TR, H Tahoma, WinCC flexible Standard, symbol languages Ethernet, automatic transfer recognition 6AV6 647-0AC11-3AX0 5 20 20 40 kbyte integrated Flash 50 500 Yes Yes 500 text elements Bit maps, icons, icon (fullscreen), vector graphics Diagrams, bar graphs 150 100 Yes 50 No 32 No No No US American (English) 5 D, GB, F, I, E, CHN "traditional", CHN "simplified", DK, FIN, GR, J, KP / ROK, NL, N, PL, P, RUS, S, CZ / SK, TR, H Tahoma, WinCC flexible Standard, symbol languages MPI/PROFIBUS DP, serial, automatic transfer recognition 6AV6 647-0AD11-3AX0 5 20 20 40 kbyte integrated Flash 50 500 Yes Yes 500 text elements Bit maps, icons, icon (fullscreen), vector graphics Diagrams, bar graphs 150 100 Yes 50 No 32 No No No US American (English) 5 D, GB, F, I, E, CHN "traditional", CHN "simplified", DK, FIN, GR, J, KP / ROK, NL, N, PL, P, RUS, S, CZ / SK, TR, H Tahoma, WinCC flexible Standard, symbol languages Ethernet, automatic transfer recognition
Character sets
Transfer (upload/download) Transfer of configuration
Process coupling Connection to controller
S7-200, S7-300/400, Modicon (Modbus) see chapter "System interfaces"
S7-200, S7-300/400, S7-200, S7- 300/400, Allen Modicon (Modbus) see Bradley (DF1), Mitsubishi chapter "System interfaces" (FX), OMRON (LINK/ Multilink), Modicon (Modbus) see section on "System interfaces" No 214 mm x 158 mm 197 mm x 141 mm/44 mm device depth No 214 mm x 158 mm 197 mm x 141 mm/44 mm device depth
S7-200, S7-300/400, Modicon (Modbus) see chapter "System interfaces"
Expandability/openness Open Platform Program Dimensions Front of enclosure (W x H) Mounting cutout/device depth (W x H) Dimensions and weight Weight Weight
No 140 mm x 116 mm 123 mm x 99 mm/40 mm device depth
No 214 mm x 158 mm 197 mm x 141 mm/44 mm device depth
0.32 kg
1.07 kg
1.07 kg
1.07 kg
Siemens ST 70 2011
4/115
Siemens AG 2011
SIMATIC S7-1200

6AV6 647-0AE11-3AX0 Product type designation Supply voltage Supply voltage Permissible range Rated current Memory Type Usable memory for user data Protocols Protocols (terminal link) Sm@rtAccess Configuration Configuration tool SIMATIC HMI KTP1000 Basic color DP 24 V DC +19.2 V to +28.8 V DC 0.6 A Flash / RAM 1024 kbyte usable memory for user data 6AV6 647-0AF11-3AX0 SIMATIC HMI KTP1000 Basic color PN 24 V DC +19.2 V to +28.8 V DC 0.6 A Flash / RAM 1024 kbyte usable memory for user data 6AV6 647-0AG11-3AX0 SIMATIC HMI TP1500 Basic color PN 24 V DC +19.2 V to +28.8 V DC 0.8 A Flash / RAM 1024 kbyte usable memory for user data
No WinCC flexible Compact Version 2008 or higher (to be ordered separately) TFT, 256 colors 10.4" (211.2 mm x 158.4 mm) 640 x 480 about 50,000 hours Membrane keyboard 8 function keys - / - / -
No WinCC flexible Compact Version 2008 or higher (to be ordered separately) TFT, 256 colors 10.4" (211.2 mm x 158.4 mm) 640 x 480 about 50,000 hours Membrane keyboard 8 function keys - / - / -
No WinCC flexible Compact Version 2008 or higher (to be ordered separately) TFT, 256 colors 15" (304.1 mm x 228.1 mm) 1024 x 768 about 50,000 hours Touch screen None - / - / -
Display Display type Size Resolution (WxH in pixel) Backlighting MTBF backlighting (at 25 C) Operating mode Control elements Function keys, programmable Connection for mouse/keyboard/ barcode reader Touch operation Touch screen Numeric/alphabetical input Ambient conditions Mounting position Maximum permissible angle of inclination without external ventilation Max. relative humidity Temperature Operation (vertical installation) Operation (max. tilt angle) Transport, storage Degree of protection Front Rear
analog, resistive Yes (on-screen keyboard) / Yes (on-screen keyboard) vertical +/- 35
90 % 0 C to +50 C 0 C to +40 C -20 C to +60 C IP65, NEMA 4, NEMA 4x, NEMA 12 (when installed) IP20
4/116
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200

6AV6 647-0AE11-3AX0 Certifications & standards Certifications I/O I/O devices Type of output LED colors Acoustics Interfaces Interfaces PC card slot CF card slot Multi Media Card slot USB port Industrial Ethernet interface Processor Processor Functionality under WinCC flexible/WinCC Basic Applications/options Number of Visual Basic Scripts Task planner Help system Status/control With alarm logging system (incl. buffer and acknowledgment) Number of messages Bit messages Analog messages Message buffer Recipes Recipes Data records per recipe Entries per data record Recipe memory Number of process images Process images Variables Limit values Multiplexing Image elements Text objects Graphics object Dynamic objects Lists Text lists Graphics list Libraries Security Number of user groups Passwords exportable Number of user rights CE, UL, cULus, NEMA 4, NEMA 4x, NEMA 12 None None Sound signal 1 x RS422,1 x RS485 (max. 12 Mbit/s) No No No No No RISC 32 bit, 200 MHz 6AV6 647-0AF11-3AX0 CE, UL, cULus, NEMA 4, NEMA 4x, NEMA 12 None None Sound signal 1 x Ethernet (RJ45) No No No No 1 x Ethernet (RJ45) RISC 32 bit, 200 MHz 6AV6 647-0AG11-3AX0 CE, UL, cULus, NEMA 4, NEMA 4x, NEMA 12 None None Sound signal 1 x Ethernet (RJ45) No No No No 1 x Ethernet (RJ45) RISC 32 bit, 200 MHz
200 Yes Yes Ring buffer (n x 256 entries), retentive, maintenance-free 5 20 20 40 kbyte integrated Flash 50 500 Yes Yes 500 text elements Bit maps, icons, icon (full-screen), vector graphics Diagrams, bar graphs 150 100 Yes 50 No 32
Siemens ST 70 2011
4/117
Siemens AG 2011
SIMATIC S7-1200

6AV6 647-0AE11-3AX0 Data carrier support PC card CF card Multi Media Card Recording Recording/Printing Fonts Keyboard fonts No No No US American (English) 5 D, GB, F, I, E, CHN "traditional", CHN "simplified", DK, FIN, GR, J, KP / ROK, NL, N, PL, P, RUS, S, CZ / SK, TR, H Tahoma, WinCC flexible Standard, symbol languages MPI/PROFIBUS DP, serial, automatic transfer recognition S7-200, S7- 300/400, Allen Bradley (DF1), Mitsubishi (FX), OMRON (LINK/Multilink), Modicon (Modbus) see section on "System interfaces" No 335 mm x 275 mm 310 mm x 248 mm / 60 mm device depth 6AV6 647-0AF11-3AX0 No No No US American (English) 5 D, GB, F, I, E, CHN "traditional", CHN "simplified", DK, FIN, GR, J, KP / ROK, NL, N, PL, P, RUS, S, CZ / SK, TR, H Tahoma, WinCC flexible Standard, symbol languages Ethernet, automatic transfer recognition S7-200, S7-300/400, Modicon (Modbus) see chapter "System interfaces" 6AV6 647-0AG11-3AX0 No No No US American (English) 5 D, GB, F, I, E, CHN "traditional", CHN "simplified", DK, FIN, GR, J, KP / ROK, NL, N, PL, P, RUS, S, CZ / SK, TR, H Tahoma, WinCC flexible Standard, symbol languages Ethernet, automatic transfer recognition S7-200, S7-300/400, Modicon (Modbus) see chapter "System interfaces"
Languages Online languages Configuration languages
Character sets Transfer (upload/download) Transfer of configuration Process coupling Connection to controller
Expandability/openness Open Platform Program Dimensions Front of enclosure (W x H) Mounting cutout/device depth (W x H Dimensions and weight Weight Weight
No 335 mm x 275 mm 310 mm x 248 mm / 60 mm device depth
No 400 mm x 310 mm 367 mm x 289 mm / 60 mm device depth
2.65 kg
2.65 kg
4.2 kg
4/118
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
Ordering data
SIMATIC HMI KP300 Basic mono PN SIMATIC HMI KTP400 Basic mono PN Starter kit for SIMATIC HMI KTP400 Basic mono PN SIMATIC HMI KTP600 Basic mono PN Starter kit for SIMATIC HMI KTP600 Basic mono PN SIMATIC HMI KTP600 Basic color DP Starter kit for SIMATIC HMI KTP600 Basic color DP SIMATIC HMI KTP600 Basic color PN Starter kit for SIMATIC HMI KTP600 Basic color PN SIMATIC HMI KTP1000 Basic color DP Starter kit for SIMATIC HMI KTP1000 Basic color DP SIMATIC HMI KTP1000 Basic color PN Starter kit for SIMATIC HMI KTP1000 Basic color PN SIMATIC HMI TP1500 Basic color PN Starter kits consist of: the relevant SIMATIC KTP Basic Panel SIMATIC WinCC flexible Compact engineering software SIMATIC HMI Manual Collection (DVD), 5 languages (English, French, German, Italian, Spanish), comprising: all currently available user manuals, manuals and communication manuals for SIMATIC HMI Ethernet cable on PN devices MPI cable on DP devices (for download and test purposes only) Starter kit SIMATIC S7-1200 + KTP400 Basic consisting of: SIMATIC HMI KTP400 Basic mono PN SIMATIC S7-1200 CPU 1212C AC/DC/Rly SIMATIC S7-1200 Simulator Module SIM 1274 SIMATIC STEP 7 BASIC CD SIMATIC S7-1200 HMI Manual Collection CD Ethernet CAT5 cable, 2 m
D I I D I D I D I D I D I D I
Order No. 6AV6 647-0AH11-3AX0 6AV6 647-0AA11-3AX0 6AV6 652-7AA01-3AA0 6AV6 647-0AB11-3AX0 6AV6 652-7BA01-3AA0 6AV6 647-0AC11-3AX0 6AV6 652-7CA01-3AA0 6AV6 647-0AD11-3AX0 6AV6 652-7DA01-3AA0 6AV6 647-0AE11-3AX0 6AV6 652-7EA01-3AA0 6AV6 647-0AF11-3AX0 6AV6 652-7FA01-3AA0 6AV6 647-0AG11-3AX0 Starter kit SIMATIC S7-1200 + KTP600 Basic consisting of: SIMATIC HMI KTP600 Basic color PN SIMATIC S7-1200 CPU 1212C AC/DC/Rly SIMATIC S7-1200 SIM 1274 simulator module SIMATIC STEP 7 BASIC CD SIMATIC S7-1200 HMI Manual Collection CD Ethernet CAT5 cable, 2 m Configuration All device versions: with SIMATIC WinCC V11, configurable Documentation (to be ordered separately) You can find the manual for the Basic Panels on the Internet at http://support.automation. siemens.com WinCC flexible Compact/ Standard/Advanced user manual German English French Italian Spanish WinCC flexible Communication user manual German English French Italian Spanish SIMATIC HMI manual collection J Electronic documentation, on DVD 5 languages (English, French, German, Italian and Spanish); contains: all currently available user manuals, manuals and communication manuals for SIMATIC HMI
D
Order No. 6AV6 651-7DA01-3AA0
4
see catalog ST 80/ST PC
6AV6 691-1AB01-3AA0 6AV6 691-1AB01-3AB0 6AV6 691-1AB01-3AC0 6AV6 691-1AB01-3AD0 6AV6 691-1AB01-3AE0
6AV6 691-1CA01-3AA0 6AV6 691-1CA01-3AB0 6AV6 691-1CA01-3AC0 6AV6 691-1CA01-3AD0 6AV6 691-1CA01-3AE0 6AV6 691-1SA01-0AX0
6AV6 651-7AA01-3AA0
D: Subject to export regulations AL: N and ECCN: 5D992 I: Subject to export regulations AL: N and ECCN: EAR99H J: Subject to export regulations AL: N and ECCN: EAR99S
Siemens ST 70 2011
4/119
Siemens AG 2011
SIMATIC S7-1200
SIPLUS operator control and monitoring
SIPLUS basic panels
Overview
Ideal entry-level series of 3.8 inches to 15 inches for operating and monitoring compact machines and systems Clear process representation through the use of full-graphic displays Intuitive operation via touch and tactile function keys Equipped with all the necessary basic functions such as reporting, recipe management, curve representation, vector graphics, and language selection Easy connection to the controller via integrated Ethernet interface or a separate version with RS485/422 Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
SIPLUS HMI KTP 400 BASIC MONO PN Order No. Order No. based on Ambient temperature range Conformal coating Technical data Ambient conditions Relative humidity Biologically active substances Chemically active substances Mechanically active substances Air pressure (depending on the highest positive temperature range specified) 6AG1647-0AA112AX0 6AV6647-0AA113AX0 -10 ... +60 C
SIPLUS HMI KTP 600 BASIC COLOR PN 6AG1647-0AD112AX0 6AV6647-0AD113AX0 -25 ... +60 C
SIPLUS HMI KTP 1000 BASIC COLOR DP 6AG1647-0AE114AX0 6AV6647-0AE113AX0 0 ... +50 C
SIPLUS HMI KTP 1000 BASIC COLOR PN 6AG1647-0AF114AX0 6AV6647-0AF113AX0 0 ... +50 C
SIPLUS HMI TP 1500 BASIC COLOR PN 6AG1647-0AG114AX0 6AV6647-0AG113AX0 0 ... +50 C
Coating of the printed circuit boards and the electronic components The technical data of the standard product applies except for ambient conditions. 5 ... 100 % Condensation permissible Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2) Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust2) 1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K
1)
4/120
Siemens ST 70 2011
Siemens AG 2011
SIMATIC S7-1200
SIPLUS operator control and monitoring
SIPLUS basic panels
Ordering data
SIPLUS HMI KTP400 Basic mono PN Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -10 ... +60 C SIPLUS HMI KTP 600 Basic color PN Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature -25 ... +60 C SIPLUS HMI KTP 1000 Basic Color DP Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature 0 ... +50 C
I H I
Order No. 6AG1 647-0AA11-2AX0 SIPLUS HMI KTP 1000 Basic Color PN Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature 0 ... +50 C 6AG1 647-0AD11-2AX0 SIPLUS HMI TP 1500 Basic Color PN Suitable for areas with extraordinary medial exposure (conformal coating); ambient temperature 0 ... +50 C 6AG1 647-0AE11-4AX0 Accessories
I I
Order No. 6AG1 647-0AF11-4AX0
6AG1 647-0AG11-4AX0
4
See SIMATIC basic panels, page 4/119
Siemens ST 70 2011
4/121
Siemens AG 2011
SIMATIC S7-1200
Software
Software
Overview
Software for the SIMATIC S7-1200 Functions for all phases of the automation project: - configuring and parameterizing the hardware - specifying the communication - programming in LAD (Ladder Diagram) and FBD (Function Block Diagram) - configuration of the visualization - test, commissioning, and service The following is available: STEP 7 Professional/Basic V11
For further information see chapter 11.
4/122
Siemens ST 70 2011

Simatic s7-1200 Catalog

Uploaded by

Copyright:

Available Formats

Simatic s7-1200 Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Simatic s7-1200 Catalog

Uploaded by

Copyright:

Available Formats

Siemens AG 2011

Shocks, test acc. to / tested with

Technical specifications (continued)

Ambient conditions Relative humidity Biologically active substances

Chemically active substances

Mechanically active substances

Air pressure (depending on the highest positive temperature range specified)

Yes 20.4 V 28.8 V Yes Yes 85 V 264 V 47 Hz 63 Hz

Yes 20.4 V 28.8 V

Technical specifications (continued)

4 kbyte; Size of bit memory address area

4 kbyte; Size of bit memory address area

4 kbyte; Size of bit memory address area

Technical specifications (continued)

Yes 240 h; typical +/- 60s/month at 25C

Yes 240 h; typical +/- 60s/month at 25C

Yes 240 h; typical +/- 60s/month at 25C

STEP 7 V10.5 or higher Yes Yes Yes Yes

STEP 7 V10.5 or higher Yes Yes Yes Yes

STEP 7 V10.5 or higher Yes Yes Yes Yes

Technical specifications (continued)

0.5 A 5W 0.1 V; with 10 kOhm load 20 V 0.5 A 0.1 mA 1 s; max. 5 s; max.

Technical specifications (continued)

100 m; Shielded, twisted wire pair

100 m; Shielded, twisted wire pair

100 m; Shielded, twisted wire pair

10 bit Yes 625 s

10 bit Yes 625 s

10 bit Yes 625 s

permissible range: 20.4 to 28.8 V

permissible range: 20.4 to 28.8 V

permissible range: 20.4 to 28.8 V

Yes 3 100 kHz Yes Yes Yes 4

Yes 3 100 kHz Yes Yes Yes 4

Yes 3 100 kHz Yes Yes Yes 4 2 100 kHz

Technical specifications (continued)

No 1 Yes; Relays No 1 500 V DC between 24 V DC and 5 V DC

No 1 Relays No 1 500 V DC between 24 V DC and 5 V DC

No 1 Yes No 1 500 V DC between 24 V DC and 5 V DC

Yes; Group 1 Yes

Yes; Group 1 Yes

Yes; Group 1 Yes

0.3 m; five times, in dispatch package -40 C to +70 C 95%

0.3 m; five times, in dispatch package -40 C to +70 C 95%

0.3 m; five times, in dispatch package -40 C to +70 C 95%

Technical specifications (continued)

6ES7 223-3AD30-0XB0 6ES7 223-3BD30-0XB0 6ES7 231-4HA30-0XB0

6ES7 954 -8LB01-0AA0 6ES7 954 -8LF01-0AA0

6ES7 221-3AD30-0XB0 6ES7 221-3BD30-0XB0 6ES7 222-1AD30-0XB0 6ES7 222-1BD30-0XB0

6ES7 292-1AH30-0XA0 6ES7 292-1AP30-0XA0 6ES7 292-1BC30-0XA0

I: Subject to export regulations AL: N and ECCN: EAR99H

6ES7 822-0AA01-0YA0 6ES7 822-0AA01-0YE0 6ES7 822-1AA01-0YC5

6ES7 822-0AA01-0YA7 6ES7 822-0AA00-0YL0

Yes 20.4 V 28.8 V Yes Yes 85 V 264 V 47 Hz 63 Hz

Yes 20.4 V 28.8 V

24 V 5V 250 V 175 mA; typical

1.2 A; 24 V DC 12 A; at 28.8 V DC 1 000 mA; max. 5 V DC for SM and CM 9W

1.2 A; 24 V DC 12 A; at 28.8 V DC 1 000 mA; max. 5 V DC for SM and CM 9W

Technical specifications (continued)

Backup present without battery CPU-blocks Number of blocks (total)