FVZ 1400

FVY 1400

AT A GLANCE
GVM 24,000 kg
GCM 36,000 kg
Engine Type Isuzu SiTEC 275
Displacement 9.8 L
Power 206 kW @ 2,000 rpm
Torque 1,030 Nm @ 1,400 rpm
Wheelbase 4,410 - 6,470 mm
FVZ 1400 Medium / PTO / Long / Auto

FVY 1400 Long / Auto

DRIVELINE & CHASSIS SPECIFICATIONS

SiTEC 275
ENGINE: SITEC 275 (ISUZU 6SD1-TC) Maximum Power : 206 kW @ 2,000 RPM
Type: 6 cylinder, 4 stroke, SOHC, direct injection diesel. Maximum Torque : 1,030 Nm @ 1,400 RPM
Variable Geometry Turbocharger (VGT) and air-to-air
intercooler. Adjustable roller type rocker arms.
Displacement: 9,839 cc
Compression Ratio: 16.0:1
Bore x Stroke: 120 x 145 mm
Max power (DIN NET): 206 kW @ 2,000 RPM e
Max torque (DIN NET): 1030 Nm @ 1,400 RPM rqu
To
Emissions Standard: ADR 80/00 (Euro III)

r
we
• Plate type oil cooler. 28.4 L oil capacity. Separate full flow

Po

Torque (Nm)
main filter and bypass oil filter.

Power (kW)
COOLING SYSTEM
• 6 blade, 600 mm diameter cooling fan with thermostatically
controlled viscous clutch. Dual drive belts.
• Radiator frontal area: 5,088 cm2.
• 29 L coolant capacity.
AIR INTAKE SYSTEM
• Vertical air intake mounted on back of cab. Two stage
Donaldson air cleaner with 280 x 380 mm main element
and 160 x 350 mm secondary element.
• 610 x 540 mm air-to-air intercooler.
FUEL SYSTEM
• Denso common rail fuel injection. Separate fuel filter and
water separator. Engine Speed (RPM)
• 400 L aluminium tank (Long models).
ISUZU SiTEC 275 (6SD1-TC) ENGINE PERFORMANCE CHART
• 180 L steel tank (FVZ Medium, PTO & Auto models).
ENGINE DRIVEN PTO (FVZ MEDIUM PTO MODEL ONLY)
• Constant mesh flywheel driven. AXLES
PTO rotates @ 1.1 x engine speed. FRONT: MERITOR FG941
• 440 Nm maximum output torque. • Reverse Elliot I-beam. 6,600 kg capacity.
• Anti-clockwise rotation when viewed from rear of engine. • Oil bath lubricated front wheel hubs, see through oil
level indicator.
CLUTCH REAR: MERITOR RT-40-145G TANDEM AXLE SET.
• Air assisted hydraulic control. • 18,100 kg capacity.
Single plate 381 mm diameter. • Drive ratios: Manual: 3.909:1, Auto: 5.857:1
Asbestos free cerametallic lining material. • 1,300 mm tandem axle spacing.
Total lining area: 1,363 cm2
• Air operated inter-axle differential lock.
TRANSMISSION • Cross locks available as optional fitment.
EATON RT-7608LL 10 Speed manual SUSPENSION
(Medium/Long)
• 10 forward speeds. Direct drive. FRONT
• Repeat ‘H’ shift pattern. • Single stage, alloy steel, taper leaf springs. Fully wrapped
eye with greasable shackles.
• 11.1 L oil capacity.
• Nominal size: 1,600 x 80 mm
• SAE PTO opening on RHS and bottom
of transmission case. • Total spring capacity (at ground): 6,670 kg
• Gear ratios (: 1) • Double acting, hydraulic shock absorbers. Stabiliser bar.
L-Low Low 1st 2nd 3rd 4th 5th 6th 7th 8th FVZ 1400 REAR
18.81 12.31 8.24 6.07 4.51 3.32 2.48 1.83 1.36 1.00 • Alloy steel, multi-leaf springs. Isuzu 6 rod and trunnion
Reverse L-Low Low High location system.
17.87 11.69 3.52 • Nominal size: 1,300 x 90 mm
ALLISON MD 3560P 6 Speed automatic • Total spring capacity (at ground): 20,740 kg
(Auto models) FVY 1400 REAR
• Electronically controlled automatic transmission with adaptive • Hendrickson HAS400 airbag.
shift. 6 forward speeds including overdrive. • Four rolling lobe air springs.
• 27 L oil capacity. • Total spring capacity (at ground): 18,140 kg
• SAE PTO opening on LHS & RHS of transmission bellhousing. • Outboard mounted double acting shock absorbers.
• Gear ratios (: 1) • Height control valve.
1st 2nd 3rd 4th 5th 6th Rev
4.59 2.25 1.54 1.00 0.75 0.65 5.00
 BRAKES AXLE LOAD SUMMARY
• Meritor ‘Q-Plus’ full air ‘S-cam’ brakes with automatic FVZ 1400 FRONT REAR
slack adjusters. Axle Capacity (kg): 6,600 18,100
• Front drum diameter: 419 mm Spring Capacity (kg): 6,670 20,740
• Rear drum diameter: 419 mm Tyre Capacity (kg): 7,100 23,200
• Swept area: 12,716 cm2 Legal Limit (kg): 6,000 16,500
• Asbestos free lining material. Limit (kg): 6,000 16,500
• Spring type parking brake acting on rear wheels.
• Air controlled exhaust brake. FVY 1400 FRONT REAR
• 96.9 L total air reservoir capacity. Axle Capacity (kg): 6,600 18,100
• Air dryer. Spring Capacity (kg): 6,670 18,140
Tyre Capacity (kg): 7,100 23,200
STEERING Legal Limit (kg): 6,000 17,000
• Power assisted recirculating ball steering. Limit (kg): 6,000 17,000
• 22.4:1 gear ratio. Note: Vehicle loading limit is determined by the combination of axle loading
limit, GVM and GCM limit, and government regulatory requirements. Consult
• 5.4 turns lock to lock. your Isuzu dealer to select the correct vehicle for your specific application.
• 450 wheel cut angle (inside wheel).
CHASSIS FRAME
WHEELS AND TYRES • Cold riveted ladder frame with parallel side rails.
• 8.25 x 22.5 Ten stud ISO standard disc wheels. FVZ Med./PTO/Auto FVZ Long/FVY Long/FVY Auto
• 295/80R22.5 152/148 Michelin XZE2 steer tyres. • Frame material HT540A SAPH440
Rating: 3,550 kg per tyre. Side rail (mm): 254 x 85 x 8 258 x 85 x 10
• 11R22.5 148/145L Michelin XDE2 drive tyres. Rear frame width (mm): 850 850
Rating: 2,900 kg per tyre (dual configuration). • Frame reinforcement section.
• Frame mounted winch type spare wheel carrier (Except • Front and rear tow hooks (except FVZ PTO model)
FVZ auto). Spare wheel and XZE2 tyre assembly supplied.
ELECTRICAL SYSTEM
• 24 Volt electrical system, 60 Amp alternator,
5.5 kW starter motor.
• 2 x 75D23R (520CCA) batteries connected in series.

CABIN SPECIFICATIONS AND APPOINTMENTS

CAB EXTERIOR dash for CB. Overhead console fitted with harness for CB.
• All steel cab, side door impact protection beams. Outer body • Tilt/Telescopic adjustable steering column, soft feel urethane
panels galvanised, corrosion resistant primer treated cab. steering wheel.
• Manual cab tilt to 450. Access to fluid checkpoints without • 12 Volt, 100 Watt and 24 Volt, 2 pin accessory sockets
tilting cab. Front access panel for clutch, windsrceen located in centre console.
washer fluids and cab air filter screen. Four point silicone • Electric windows.
filled rubber cab mounting. • Central locking with remote keyless entry.
• Body coloured steel front bumper with step holes and • Centre facia pullout drinks holder. Lockable centre
footplate. storage compartment. Cigarette lighter.
• 900 opening internally reinforced door. Heavy duty • Heater/Demister with 4-speed fan and outlets for
aluminium non slip entry steps. windscreen, side windows, face and floor.
• Tinted, laminated windscreen. 2 speed windscreen wiper • Standard fully integrated air conditioning.
system, variable intermittent wipe mode, triple washer jets. • Two speaker Eurovox Radio/CD player with digital anti
• Halogen headlamps. Park lamps and roof-mounted skip memory.
clearance lamps. • Remote seek/volume and mute switch located on dash to
• Combination brake, turn, reverse and marker lamps, right of steering wheel.
registration plate illumination lamps. Extended wiring • Optional 10 stack CD player.
harness. Reverse alarm.
• ‘West Coast’ type rear view mirrors. Large flat mirror glass
DRIVER CONTROLS
with additional, independently adjustable convex ‘spot’ • Key-operated engine start/stop and steering lock. Electronic
mirror on both sides. throttle control. Engine idle speed control.
• Dual tone air horn. • Left side combination stalk: Windscreen wipers, washers,
exhaust brake and hazard lights.
CAB INTERIOR • Right side combination stalk: Turn signals and headlamps.
• Isringhausen ISRI 6500/517 air suspension driver’s seat, • Pushbutton gear selection (automatic models).
auto weight adjustment to 130 kg. Height, rake and
backrest recline adjustment. Pneumatic lumbar support. INSTRUMENTATION
Reclining passenger bucket seat. Centre seat with folding • Gauges: Electronically driven speedometer, odometer,
seat back (except auto and PTO models). tripmeter, tachometer. Gauges for coolant temperature and
• 3-point, lap sash seatbelts with emergency locking belt brake air pressure.
retractors in all outboard seating positions. Centre lap • Warning lamps: Warning bulb check switch. Battery charge,
seatbelt (except auto and PTO models). brake system, engine malfunction, oil pressure, stop and
• ‘A’ pillar entry assist grips. Fluorescent dome interior lamp tail lamp failure.
with On/Door/Off switch activated by either door. • Indicator lamps: Turn signals, parking brake, high beam,
• Full interior panel trim, padded roof lining, vinyl floor mats. exhaust brake engaged.
Windscreen header storage shelf. DIN sized aperture in
FVZ 1400 Medium 8FU02-7E0
/ PTO / Long / Auto
8FU02-7E2 8FV02-7E0 8FV02-7F0
(MU1) (MU1) (MU1) (MU1)
FVY 1400 Long / 8FV02-7E1 (MU1)
Auto
8FV02-7F1 (MU1)

PERFORMANCE (Calculated)
FVY 1400 MEDIUM / LONG FVY 1400 AUTO FVZ 1400 MEDIUM / PTO
Max Geared speed: 105* km/h @ 2,100 rpm 108* km/h @ 2,100 rpm 105* km/h @ 2,100 rpm
Gradeability (lowest gear) : 58% at 23,000 kg GVM 38% at 23,000 kg GVM 59% at 22,500 kg GVM
Gradeability (top gear at 100 km/h): 0.8% (2.5 x 3.4 m van body at 23,000 kg GVM) 1.0% (refuse truck at 23,000 kg GVM) 1.1% (concrete agitator at 22,500 kg GVM)
Engine speed (top gear at 100 km/h) : 2,000 rpm 1,950 rpm 2,000 rpm
Performance figures quoted are representative only and based on typical dimensions, body styles and weights. Please consult your Isuzu dealer for an estimation based on your specific application. * Road speed limited to 100 km/h

MODEL RATINGS AND DIMENSIONS

MODELS RATINGS (kg) TARE MASS #(kg) DIMENSIONS (mm) TURN
CIRCLE
GVM GCM TOTAL FRONT REAR WB OAL FOH ROH CA CE RT ORT CH CW FFH RFH KERB
UNLADEN UNLADEN TO KERB

FVZ Med./PTO 24,000 36,000 6,575 3,130 3,445 4,410 7,600 1,250 1,940 3,700 5,640 1,855 2,465 2,790 2,440 985 1,060 15.3 m
FVZ Long 24,000 36,000 7,060 3,345 3,715 6,470 11,145 1,250 3,425 5,760 9,185 1,855 2,465 2,785 2,440 985 1,060 21.3 m
FVZ Auto 24,000 36,000 6,645 3,155 3,490 5,300 9,195 1,270 2,625 4,590 7,215 1,855 2,465 2,785 2,440 985 1,060 18.0 m
FVY Long 24,000 36,000 6,855 3,340 3,515 6,470 11,145 1,250 3,425 5,760 9,185 1,840 2,450 2,785 2,440 985 1,020 21.3 m
FVY Auto 24,000 36,000 6,770 3,285 3,485 6,470 11,145 1,250 3,425 5,760 9,185 1,840 2,450 2,785 2,440 985 1,020 21.3 m
# Estimated mass of cab/chassis with oil, water and fuel tank containing 10 litres of fuel and excluding spare wheel (95 kg) and tools (30 kg). PTO adds approx. 50 kg to tare mass.
255

710
CA
CE

RFH
FFH
3,450
CH

2025 RT
CW ORT
FOH WB ROH
OAL
For further information regarding Cab/Chassis dimensions your Isuzu Dealer can access detailed Body Builders diagrams from the Isuzu Truck Technical Reference CD.

ISUZU NEW TRUCK WARRANTIES

STANDARD TRUCKPOWER WARRANTY* TRUCKPOWER EXTENDED WARRANTY OPTIONS#
NEW VEHICLE 3 years 200,000 km
4 years / 300,000 km 5 years / 350,000 km 6 years /400,000 km
DRIVETRAIN 3 years 200,000 km
CAB CORROSION 3 years unlimited

* Subject to the conditions outlined in the I-GM New Vehicle Warranty, the Isuzu
Why have Isuzu Trucks been FVZ & FVY models carry a standard factory warranty which covers the owner:
Australia’s No. 1 choice since 1989? * (i) for the entire vehicle, for the first 36 months or 200,000 km (whichever comes
first). (ii) for the drivetrain, which runs concurrently, for 36 months or 200,000 km
• Widest range of models to suit most applications (whichever comes first). (iii) against cab corrosion, for 36 months and
• Premium componentry and Isuzu diesel engines unlimited kilometres.
• Network of over 40 specialist Isuzu Dealerships and branches
#
A TruckPower Extended Warranty as illustrated is available by purchase to
cover the owner against the failure of original components, but excludes some
• Sales, services and parts support components and expendable items such as oil, filters, etc. Please consult with
• Predictable operating costs through Dealer ISIS program your Isuzu Dealer for full details obtained from a dedicated brochure available
• Factory and range of extended warranties available to customers.
• High resale values
• Leading reputation for reliability
www.isuzu.com.au * Source Truck Tracker 2003

ISUZU-GENERAL MOTORS AUSTRALIA LTD A.C.N. 006 962 572. PLEASE NOTE: as the policy of I-GM is one of continual product improvement, all specifications and equipment are subject to
change without notice. No I-GM dealer or other person is authorised or permitted to give or make any statement, assertion or undertaking in relation to the quality, performance, characteristics,
descriptions or fitness for any purpose of any I-GM product or in connection with the supply of any I-GM product which is at variance with any written statement, assertion or undertaking on any of these
subjects given or made by I-GM in its published sales literature, and the company accepts no liability for any such unauthorised action. I-GM has franchised dealers in many parts of Australia, for the
sale of service, parts and the provision of service to the owners of I-GM products. Every endeavour is made to ensure that such dealers carry adequate stocks of service parts and are equipped to
provide satisfactory service, but makes no promise, other than that contained in the I-GM new vehicle warranty, that such parts or service facilities will be available or available at any specific location
or at any particular time. A word about this specification sheet. We have tried to make it as comprehensive and factual as possible. However, since the time of printing some of the information you will
find here may have been updated. Also, some of the equipment shown or described through this specification sheet may have been changed and/or is available at extra cost. And the right is reserved
to make changes at any time without notice, in prices, colours, materials, equipment and models. Your I-GM dealer has details and before ordering, you should ask him/her to bring you up to date.
OCTOBER 2004. ARK/IGM 0133