Specifications: Australia'S Top Selling Truck Brand Since 1989
Specifications: Australia'S Top Selling Truck Brand Since 1989
Specifications: Australia'S Top Selling Truck Brand Since 1989
NPR 45/55-155
TIC: Isuzu is a member of the Truck Industry Council - Safer Greener Essential.
NPR 45/55-155
CLUTCH
Standard model:
• Auto adjusting hydraulic control with vacuum assistance. Single plate
325 mm diameter.
• Total lining area: 966 cm²
AMT Pack: BRAKES
• Fully automated hydraulically controlled wet clutch and fluid coupling with • Auto adjusting front and rear disc brakes with dual circuit hydraulic control,
lock up. vacuum assistance and electronic brake force distribution (EBD).
• ABS, ASR traction control, IESC stability control.
TRANSMISSION
• Hill Assist - except AMT pack.
ISUZU MYY-6E
• Front disc diameter: 293 mm
• PTO provision on LHS of transmission case. PTO drive from counter gear.
• Rear disc diameter: 293 mm
•G ear ratios (:1)
• 190 mm diameter drum park brake mounted on rear of transmission.
1st 2nd 3rd 4th 5th 6th Rev
5.979 3.434 2.040 1.379 1.000 0.750 5.701 • Vacuum controlled exhaust brake.
Standard model: 6 speed manual. Synchromesh on gears 1-6. STEERING
AMT Pack: 6 speed Automated Manual Transmission (AMT) with both fully
• Power assisted recirculating ball steering.
automatic and clutchless manual operation modes.
• Gear ratio: 20.9:1
AXLES • Turns lock to lock: 5.4
Front: Isuzu F031 • Maximum angle: 48° (inside wheel) / 35° (outside wheel)
• Reverse Elliot I-beam. 3,100 kg capacity.
WHEELS AND TYRES
Rear: Isuzu R066
• 16 x 5.5J six stud steel wheels.
• Full floating Banjo type. Four differential pinions. 6,600 kg capacity.
• 195/85R16 114/112L Michelin XJE4 Mix Energy Tubeless.
• Drive ratio: 4.100:1
• Maximum tyre rating:
SUSPENSION Steer axle: 2,360 kg
Drive axle: 4,480 kg
Front:
• 1 frame mounted spare wheel and tyre assembly.
• Single stage alloy steel taper leaf springs.
• Double acting hydraulic shock absorbers. Stabiliser bar. CHASSIS FRAME
Rear: • Cold rivetted ladder frame. SAPH440 weldable steel sidemembers. Parallel
• Multi leaf main spring, taper leaf helper spring. side rails and rivetless top flange.
• Double acting hydraulic shock absorber. Stabiliser bar. • Frame dimensions:
Side rail (mm): 216 x 70 x 6.0
Rear frame width (mm): 850
FUEL TANK ELECTRICAL SYSTEM
• Frame mounted 100L steel fuel tank. • 24 volt electrical system.
• Lockable fuel cap. • 90 amp alternator.
• 4.5 kW starter motor.
• 2 x 80D26L (630 CCA) batteries connected in series.
WEIGHTS (kg)
Ratings* Loading Limit* (at ground) Cab Chassis Weight #
Models
GVM GCM Front Rear Front Rear Total
NPR 45/55-155 SWB 4,500 / 5,500 8,000 / 9,000 2,360 4,480 1700 795 2495
NPR 45/55-155 AMT SWB 4,500 / 5,500 8,000 / 9,000 2,360 4,480 1720 815 2535
NPR 45/55-155 MWB 4,500 / 5,500 8,000 / 9,000 2,360 4,480 1710 815 2525
NPR 45/55-155 AMT MWB 4,500 / 5,500 8,000 / 9,000 2,360 4,480 1735 835 2570
* Vehicle ratings and front/rear weight limits are subject to government regulatory requirements and weight distribution analysis. Consult your Isuzu dealer to select the correct vehicle for your specific application. # Cab chassis
only as supplied and including 10 litres of fuel.
1
Subject to the conditions outlined in the IAL New Vehicle Warranty, the Isuzu NPR models carry a standard factory warranty which covers the owner: (i) for the entire vehicle, for the fi rst 36 months or 100,000 km or 2,000 hrs
(whichever comes fi rst). (ii) against cab perforation corrosion, for 36 months and unlimited kilometres. 2Extended Warranty as illustrated may be purchased to cover the owner against the failure of original components, but may
exclude some components and expendable items such as oil, filters, etc. Please consult with your Isuzu Dealer for full details obtained from a dedicated brochure available to customers. *Valid for three years from the date of
new vehicle purchases. All Isuzu warranties are subject to mandatory prescribed terms under Australian Consumer law including customer guarantees. For more details visit the Isuzu website which explains Isuzu warranties in
more detail, or alternatively contact your local dealer. All warranties commence from date of delivery.
ISUZU AUSTRALIA LIMITED ABN 97 006 962 572 (“IAL”). The information in this spec sheet was correct at time
of printing, but all measurements, specifications and equipment are subject to change without notice. Some
equipment may have been changed and/or is available at extra cost. IAL may make changes at any time without
notice, in prices, colours, materials, equipment and models. IAL makes all reasonable attempts to ensure the
availability of all vehicles and equipment. The information in this spec sheet is general in nature. Your Isuzu
dealer can confirm all measurements, specifications and vehicle / equipment availability upon request.
To the extent permitted by the law, IAL is not liable to any person as result of reliance on the content of this
spec sheet.
December 2015, ARK0858