sandvik-shark

SHARKTM GROUND ENGAGING TOOLS
GET MORE FROM YOUR BUCKET

EXPERIENCE THE SHARKTM DIFFERENCE
Underground loaders play a crucial role in mining production, helping to efficiently move ore for processing. Loader
buckets that keep their integrity and last longer have the power to boost productivity – and profitability.
SharkTM ground engaging tools (GET) provide the ultimate protection for your bucket, significantly extending life and
reducing costly downtime. Specially designed for abrasive underground environments, the SharkTM range enhances
the structural strength of buckets produced by Sandvik and other OEMs, helping you shift more tonnes per hour.
The SharkTM GET range features a variety of solutions to meet your operational and change-out needs.
MakoTM and the Blue PointerTM 2 range provide the ease of mechanical attachment, while the Half Arrow range offers
the simplicity and strength of a weld-on solution. Explore the benefits of the complete SharkTM range.
• MakoTM
• Blue PointerTM 2
• Half Arrow
• Weld-on and Mechanical Heel Shrouds
• Plate Profile Bars and Cast Profile Bars
Bucket without GET Bucket with SHARKTM GET
01
5 MAJOR BENEFITS FOR YOUR OPERATION
EXTEND BUCKET LIFE

Increase the working life of your buckets by up to
three times with the ultimate leading-edge lip protection.
LOWER COSTS
Cut costs by up to 45 percent across the total life of the bucket.
MORE
EFFICIENT
MINING REDUCE DOWNTIME
SharkTM ground engaging Significantly lower maintenance downtime and safely extend
tools help you boost the change-out intervals.
productivity of your mine in
these key ways.
BOOST PRODUCTIVITY
Maintain bucket geometry and one-pass loading longer by reducing
premature wear that can affect optimal operation.
OPTIMIZE EFFECTIVENESS
Boost overall effectiveness. Worn buckets aren’t just less efficient,
they have a harmful impact on drive train components, fuel
consumption and overall wear.
02
WORN BUCKETS ARE INEFFICIENT BUCKETS
As the condition of a loader bucket deteriorates,

it delivers less and less for your operation.
Typical bucket wear problems include:
• reduced penetration due to wear of

leading edge;
• higher fuel usage due to the machine

working harder;
• more wear and tear on consumables such

as tires, which need to work harder and tend
to spin as the machine tries to penetrate the
muck pile; and
• reduced loading. The volume of dirt shifted

by worn bucket can be 20 percent less per
cycle than that moved by a new one.
Hover your phone camera or QR code reader over the code on the left
to watch a video on the difference SharkTM can make. Or visit
https://youtu.be/Mb4RCAyFH2M
03
‘A WORN BUCKET CAN REDUCE
LOAD CAPACITY BY 20 PERCENT
PER LIP REBUILD CYCLE.’
04
PROVEN RESULTS FROM SHARKTM GET
SharkTM GET has proven its ability to reduce downtime and increase productivity, time and time again in mines
across the planet.
A typical customer might be a gold mine that operates a number of LHDs. Without the protection of SharkTM GET, the
capacity of loader buckets tends to fall by 20 percent across the maintenance cycle, resulting in 52,000 tonnes of
lost production over a year. With SharkTM GET in place bucket capacity drops by just five percent, resulting in 39,100
tonnes in saved production – and saving the customer 10.3 million USD in revenue across the year.
SHARKTM GET IN ACTION

HOW A TYPICAL CUSTOMER MIGHT BENEFIT FROM THE SHARKTM DIFFERENCE
Ore: Gold
Grade: 5g/tonne
Price: USD1500 /oz
Bucket Volume: 10.7m³
Fill Factor: 90%
Cycle time: 5 minutes
Bucket Type Capacity Loss/Cycle Total Production Loss

Unprotected up to 20% 52,000 tonnes/year
GET protected 5% 12,900 tonnes/year
Bucket Type Production Saved Production Savings
GET protected 39,100 tonnes/year 10.3 million USD/year
Test results achieved under controlled conditions. Results should not be treated as specifications and Sandvik does not
guarantee, warrant or represent the outcome of test results in any or all circumstances.
05
HOW SHARKTM HAS EVOLVED
2022
MAKOTM
Optimised shrouds and cast corners,
an innovative locking system, improved
2015 material specs and new safety features
all make MakoTM the most advanced
SharkTM GET ever.
BLUE POINTERTM 2 EXTENDED

Introduction of new shroud design made
from improved material specifications
and engineered to perform better in
extreme environments. 2014
MECHANICAL HEEL SHROUD

Innovative retensionable heel-shroud
locking system significantly reduces
2010 change-out times.
BLUE POINTERTM 2 HEAVY DUTY

Improved shroud design further
extends bucket life in aggressive mining
operations, reducing operating costs.
2006
BLUE POINTERTM 2
Innovative locking-pin design delivers
2001 quicker change-out times.
BLUE POINTERTM 1
(No longer available)
The world’s first retensionable shroud
locking system for underground bucket
loaders is launched.
06
A SHARKTM SOLUTION FOR EVERY
UNDERGROUND OPERATION
GET TO KNOW THE SHARKTM FAMILY
Weld-on Heel Shrouds (W)
Mechanical Heel Shrouds (M)
Plate Profile Bar (W)
50mm Cast Profile Bar (W)
55mm Cast Profile Bar (W)
07
Legend:
(W) - Weld-on GET
(M) - Mechanically-attached GET
Half Arrow Series (W)
Blue PointerTM 2 Series (M)
MakoTM (M)
08
MAKOTM
Large-scale underground mining operations put huge demands on both LHD buckets and GET. MakoTM is a next-
generation lip protection system designed specifically for the toughest of mining conditions.
The 50mm MakoTM system’s optimised design and tougher materials boost bucket productivity by 40 per cent
compared to predecessor GET systems. It delivers a 400-percent longer life than a bare lip.
CHARACTERISTICS
• Constructed from Sandvik SS5000 steel alloy for increased hardness and added
mechanical strength.
• Single cartridge locking-and-removal system.
• Structurally improved cast corners.
• Innovative shroud lifting device for safer workshops.
• Top and bottom wear indicators for ease of inspection.
ADVANTAGES
• Straight and corner shrouds optimised for 1:1 wear life, eliminating the need for
half-life change-outs of corners. (*)
• 20-per cent lower top leg for enhanced material flow when dumping.
• Optimised design and materials increase wear life by 16 per cent over predecessor.
• Shroud width altered to optimise number required, reducing number of parts.
BENEFITS
• Even longer bucket service life
• Reduced maintenance frequency
• Improved safety during maintenance
• Reduced frequency of lip rebuilds
• Fewer parts to track
• Increased loader availability
COMPATIBILITY
Mako 50 mm is suitable for:
• Sandvik: LH621/LH517/LH514
• Caterpillar: R3000/R2900/R1700
• Epiroc: ST14/ST18
55
mm
22
5m
m
(*) Subject to certain mining applications and conditions
09
MAKOTM
NEW CORNER SHROUDS DESIGN

When corner and straight shrouds wear at different
rates, additional maintenance stops may be
required for half-life change-outs of corners. The
wear rate for MakoTM corners and straight shrouds
has been optimised to close to 1:1, meaning fewer
maintenance stops and greater uptime.
NEW PIN ASSEMBLY

Save time and prevent injuries during change-out with
Mako’s patented, single-cartridge locking and removal
system. Each cartridge is pre-lubricated for simple
installation. Enjoy quick and safe hammerless removal
using a rattle gun (hex bolt 19mm o ¾”).
NEW CAST CORNERS

The corner is a high-stress zone on the bucket that faces an
elevated risk of fatigue failure. Patented Mako TM cast corners have
undergone structural improvements that make them resistant to
fatigue, extending the life of the bucket lip.
10
MAKOTM
NEW BOSS
MakoTM new weld-on boss system is
easy to weld and replace.
SHROUD LIFTING DEVICE

Shrouds are heavy objects, and worn shrouds in particular can be difficult to move due to
the absence of lifting lugs. MakoTM shrouds lifting device, helps make your workshop safer
for easy shrouds change-out.
VIDEO
Hover your phone camera or QR code

reader over the code on the left to watch
a video on the difference MakoTM can make.
Or visit https://youtu.be/g04OHwftvpk
11
BLUE POINTERTM 2
Blue PointerTM 2 is a range of mechanically attached, quick-change lip protection systems designed to extend the
life of loader buckets by preserving the structure of the primary lip.
The range’s advanced design allows for good penetration of muck piles and optimization of material flows during
dumping. Shrouds in the Blue PointerTM 2 range are constructed from a Sandvik wear-resistant alloy that delivers a
high performance-to-weight ratio.
CHARACTERISTICS
• Constructed from custom, high-performance
Sandvik wear-resistant steel.
• Adjustable locking system.
• Dedicated cast corners provide extra
support to high-wearing corner zones.
• Low-profile blades provide increased penetration.
• Built-in wear indicators.
ADVANTAGES
• Quicker and easier change-out compared to weld-on systems.
• No welding required for change-outs.
• Quicker change-outs than replacing the entire lip.
• Features half corner shrouds to further extend lip life.
• Longer wear-life than weld-on lip systems.
BENEFITS
• Extends bucket service life.
• Maintain bucket capacity for longer.
• Reduce the frequency of lip rebuilds.
• Reduce bucket downtimes and increase loader availability.
• Reduce the total cost of ownership of loader and bucket.
MAINTENANCE
• Customers required to have capacity to maintain the
product after installation.
TYPES
• 32mm Standard
• 50mm Standard
• Heavy Duty
• Extended
12
BLUE POINTERTM 2
WEAR INDICATORS
Blue PointerTM Series shrouds feature wear indicators that:
• become visible when there is 7mm of wear material remaining;
• help you to correctly time changeouts to maximize the shrouds life and minimize shroud failures.
7 mm
Sectional view of Blue Pointer™ 2 Worn lip

50mm Standard shroud
Wear indicators
HALF CORNER SHROUDS

In cases where corner shrouds require replacement before the rest of the GET, fitting standard shrouds can disrupt
the continuous cutting edge. This can create a corner that catches, slowing production and damaging road surface
conditions through gouging.
Replacing worn corner shrouds with half corner shrouds with a lower profile can maintain the continuous cutting
edge, resulting in:
• extended bucket life;
• alignment of wear package;
• lower costs.
Worn corner shrouds Standard corner shrouds Half corner shrouds
13
BLUE POINTERTM 2
BLUE POINTER™ 2 – 32MM STANDARD

• Suitable for small to medium-sized loaders operating in normal
mining conditions. 45 mm
• Constructed from highly wear-resistant Sandvik SS3000 steel alloy. 155 mm
• Suits 32mm thick primary lips.
BLUE POINTER™ 2 – 50MM STANDARD

• Suitable for medium to large-sized loaders operating in normal
mining conditions.
45 mm
• Constructed from highly wear-resistant Sandvik SS3000 steel alloy.
195 mm
BLUE POINTER™ 2 – HEAVY DUTY

• Suitable for medium to large-sized loaders operating in aggressive
mining conditions.
55 mm
195 mm
• More available wear material than 50MM Standard shrouds.
BLUE POINTER™ 2 – EXTENDED

• Suitable for medium to large-sized loaders operating in extreme
mining conditions.
55 mm
• More available wear material than Heavy Duty shrouds. 225 mm
Type Model BP32mm BP50mm BPHD BPE

LH307 ●
LH410 ● ●
Sandvik LH514 ● ● ●
LH517 ● ● ●
LH621 ● ● ●
ST3.5 ●
ST7 ●
Epiroc ST1030 ● ●
ST14 ● ● ●
ST18 ● ● ●
R1300 ●
R1600 ● ●
Caterpillar R1700 ● ● ●
R2900 ● ● ●
R3000 ● ● ●
14
HALF ARROW
The Half Arrow Series is a range of weld-on lip ADVANTAGES

protection systems designed to extend the life of • Compatible with all Sandvik and non-Sandvik
loader buckets by preserving the structure of the loader buckets.
primary lip. The range’s advanced design allows for
• No structural modifications required to
good penetration of muck piles and optimization of
install system.
material flows during dumping. GET in the Half Arow
range are constructed from a Sandvik wear-resistant • Faster GET change-outs than replacing the
alloy that delivers a high performance-to-weight ratio. entire lip.
CHARACTERISTICS BENEFITS
• Constructed from custom high-performance, • Extend bucket service life.

wear-resistant Sandvik SS2000 steel alloy. • Maintain bucket capacity for longer.
• Dedicated corner edges protect • Reduce the frequency of lip rebuilds.
high-wearing zones. • Reduce the total cost of ownership of loader
• Self-sharpening profile to maintain and bucket.
mucking performance.
• Optimized for maximum GET wear and reduced TYPES
waste material at end of life.
• Light Duty
• Built-in weld prep areas for easy installation.
• Heavy Duty
15
HALF ARROW
HALF ARROW – LIGHT DUTY

Suitable for small to medium-sized
loaders operating in normal
mining conditions.
Lip thickness range = 38 mm
25mm – 38mm.
180 mm
HALF ARROW – HEAVY DUTY

Suitable for medium to large-sized
loaders operating in normal to
aggressive mining conditions.
Lip thickness range =
55 mm
40mm – 50mm.
320 mm
HALF ARROW COMPATIBILITY
Type Model HA Light duty HA Heavy Duty

LH202 ●
LH203 ●
LH204 ●
LH307 ● ●
Sandvik
LH410 ●
LH514 ●
LH517 ●
LH621 ●
ST2G ●
ST2D ●
ST3.5 ●
Epiroc ST7 ● ●
ST1030 ●
ST14 ●
ST18 ●
R1300 ● ●
R1600 ●
Caterpillar R1700 ●
R2900 ●
R3000 ●
16
WELD�ON HEEL SHROUDS
Shark™ heel shrouds protect the external weld seams BENEFITS

of the bucket’s side walls and floor plates during • Extend bucket service life.
high-abrasion mining operations, reducing wear.
• Protect the side wall and floor plate weld seams.
They also provide support to the whole GET package,
helping to extend the life of the bucket through • Reduce the frequency of lip rebuilds by supporting
wear-package alignment. the primary lip through wear-package alignment.
• Reduces the total cost of ownership of your loader
and bucket.
CHARACTERISTICS
wear-resistant Sandvik SS2000 steel alloy. THICKNESS
• Available in different sizes and types to better suit • 40mm

your site-specific application. • 50mm
• Has cut-out design feature to suit all
bucket designs. TYPES
• Single weld-on Heel Shrouds
ADVANTAGES • Long weld-on Heel Shrouds
• Compatible with all Sandvik and non-Sandvik
loader buckets.
• Long heel shrouds available to eliminate wash-out
between shrouds.
Single weld-on Heel Shrouds
Long weld-on Heel Shroud
17
MECHANICAL HEEL SHROUDS
Shark™ mechanical heel shrouds (MHS) protect the BENEFITS

external weld seams of the bucket’s side walls and • Extend bucket service life.
floor plates during high-abrasion mining operations,
• Can be accessed from the side of the bucket,
reducing wear. They also provide support to whole
improving safety.
GET package, helping to extend the life of the bucket
through wear-package alignment. • Protects the side wall and floor plate weld seams.
Mechanical heel shrouds improve change-out times • Reduces the frequency of lip rebuilds by supporting
by up to 85 percent. No ‘hot work’ required after initial the primary lip through wear-package alignment.
baseplate installation. • Reduces the total cost of ownership of loader
and bucket.
CHARACTERISTICS
• Constructed from custom, high-performance, THICKNESS
wear-resistant Sandvik SS3000 steel alloy. • 55mm
• Has cut-out design feature to suit all
bucket designs. TYPES
• Parts must be ordered as left hand or • Standard
right-hand parts.
• XL
ADVANTAGES
MAINTENANCE
• Customers required to have capacity to maintain
loader buckets.
the product after installation.
• XL (Leading) heel shrouds for higher wearing areas.
18
PLATE PROFILE BARS
Shark™ Profile Bars protect the rear underside faces of BENEFITS

the lip protection system from wear during normal and • Extend bucket service life.
back blading operations. They also provide support to
• Reduce the frequency of lip rebuilds by supporting
whole GET package, helping to extend the life of the
the primary lip through wear-package alignment.
bucket through wear-package alignment.
• Reduce the total cost of ownership of loader
and bucket.
CHARACTERISTICS
• Plate profile bars are constructed from
THICKNESS
high-performance, wear-resistant steel.
• 40mm Plate
• Available in different thickness sizes to suit
different wear package combinations. • 50mm Plate
ADVANTAGES
loader buckets.
CAST PROFILE BARS
Shark™ Cast Profile Bars protect the rear underside ADVANTAGES

faces of the lip protection system from wear during • Compatible with all Sandvik and non-Sandvik
normal and back blading operations. They also provide loader buckets.
support to whole GET package, helping to extend the
• Modular design that can be cut to suit any
life of the bucket through wear-package alignment.
bucket width.
• Better wearability than plate profile bars..
CHARACTERISTICS
BENEFITS
wear-resistant Sandvik SS2000/SS2300
steel alloy. • Extend bucket’s service life.
• Excellent through-hardness capability for • Reduce the frequency of lip rebuilds by supporting
lifetime performance. the primary lip through wear-package alignment.
• Modular design with dedicated corner heel-shroud • Reduce the total cost of ownership of loader
design to reinforce high-wearing areas. and bucket.
THICKNESS
• 50mm (SS2000 steel alloy)
• 55mm (SS2300 steel alloy)
19
SUMMARY LOADER COMPATIBILITY MATRICES
Type Model HA LD HA HD BP32mm BP50mm BPHD BPE MakoTM
LH202 ●
LH203 ●
LH204 ●
LH307 ● ● ●
Sandvik
LH410 ● ● ●
LH514 ● ● ● ● ●
LH517 ● ● ● ● ●
LH621 ● ● ● ● ●
ST2G ●
ST2D ●
ST3.5 ● ● ●
Epiroc ST7 ● ● ●
ST1030 ● ● ●
ST14 ● ● ● ● ●
ST18 ● ● ● ● ●
R1300 ● ● ●
R1600 ● ● ●
Caterpillar R1700 ● ● ● ● ●
R2900 ● ● ● ● ●
R3000 ● ● ● ● ●
Further maintenance and operational assessments maybe necessary to define the most suitable system for a customer’s
specific application.
20
50MM MAKOTM SHROUDS
Sandvik part number SHARKTM part number Description
BC00003429 SM50-B Mako 50mm Weld on Boss
BU00081000 SM50-PAS2 Mako 50mm Pin Assembly
BC00003415 SM50x260-CL Mako 260mm Left Hand Corner Shroud
BU00024899 SM50x260-CLH Mako 260mm L/H Half Corner Shroud
BC00003416 SM50x260-CR Mako 260mm Right Hand Corner Shroud
BU00024898 SM50x260-CRH Mako 260mm R/H Half Corner Shroud
BC00003414 SM50x286-T Mako 286mm Transition Shroud
BC00003411 SM50x290-S Mako 290mm Straight Shroud
BC00003419 SMC50x285-LE Mako 50mm Extended L/H Cast Corner
BC00003417 SMC50x285-LS Mako 50mm L/H Cast Corner Standard
BC00003420 SMC50x285-RE Mako 50mm Extended R/H Cast Corner
BC00003418 SMC50x285-RS Mako 50mm R/H Cast Corner Standard
21
32MM BLUE POINTERTM 2 � STANDARD
69039979 SBP32-BP2 BP2 32mm Bolt Plug (Bag of 50)
69039977 SBP32-CS2 BP2 32mm Packaged Cap Screws
69039975 SBP32-PAS2 BP2 32mm Pin Assembly
69039976 SBP32-SKS2 BP2 32mm Service Kit
69039978 SBP32-SS2 BP2 32mm Spacer
69039980 SBP32-B2 BP2 32mm Weld on Boss
69039971 SBP32x210-CL2 BP2 32mm Corner Shroud L/H
69039972 SBP32x210-CR2 BP2 32mm Corner Shroud R/H
69042488 SBP32x210-CLH2 BP2 32mm 3/4 Corner Shroud L/H
69042489 SBP32x210-CRH2 BP2 32mm 3/4 Corner Shroud R/H
69039967 SBP32x250-S2 BP2 32mm Straight Shroud 250mm
69039970 SBP32x275-T2 BP2 32mm Transition Shroud 275mm
69039973 SCC32x155-LS BP2 32mm Cast Corner L/H
69039974 SCC32x155-RS BP2 32mm Cast Corner R/H
69042890 SBP32-HK5/8 01983605 - 5/8 Hex Key
50MM BLUE POINTERTM 2 � STANDARD

69039957 SBP50-CS2 BP2 50mm Packaged Cap Screw
69039960 SBP50-B2 BP2 50mm Weld On Boss
69039951 SBP50x235-CL2 BP2 50mm Corner Shroud L/H
69039952 SBP50x235-CR2 BP2 50mm Corner Shroud R/H
69039950 SBP50x288-T2 BP2 50mm Transition Shroud 288mm
69037854 SCC50x175-LS BP2 50mm Cast Corner Left Hand
69037855 SCC50x175-RS BP2 50mm Cast Corner Right Hand
69037869 SCC50x175-LE BP2 50mm Long Cast Corner Left Hand
69037870 SCC50x175-RE BP2 50mm Long Cast Corner Right Hand
69042891 SBP50-HK19mm 01983702 - 19mm Hex Key
22
50MM BLUE POINTERTM 2 � HEAVY DUTY
69039965 SBP50x235-CLX2 BP2 50mm HD Corner Shroud L/H
69039966 SBP50x235-CRX2 BP2 50mm HD Corner Shroud R/H
69039964 SBP50x288-TX2 BP2 50mm HD Transition Shroud 288mm
69039961 SBP50x290-SX2 BP2 50mm HD Straight Shroud 290mm
50MM BLUE POINTERTM 2 � EXTENDED

BU00012677 SBP50x235-CLE BP2 50mm Ext Corner Shroud L/H
BU00010963 SBP50x235-CRE BP2 50mm Ext Corner Shroud R/H
BU00058793 SBP50x235-CLHE BP2 50mm Ext 3/4 Corner Shroud L/H
BU00058794 SBP50x235-CRHE BP2 50mm Ext 3/4 Corner Shroud R/H
BU00011156 SBP50x288-TE BP2 50mm Ext Transition Shroud 288mm
BU00010922 SBP50x290-SE BP2 50mm Ext Straight Shroud 290mm
23
HALF ARROW � LIGHT DUTY
69043429 SHA180x1026-FS LD Half Arrow - Full Spade Centre Edge
69043431 SHA180x1150-SS LD Half Arrow - Semi Spade Centre Edge
69037842 SHA180x1060 LD Half Arrow - 1060mm Wear Edge
69040158 SHA180x280-L LD Half Arrow - L/H Corner Edge
69040159 SHA180x280-R LD Half Arrow - R/H Corner Edge
HALF ARROW � HEAVY DUTY

69043428 SHA320x1044-FS HD Half Arrow - Full Spade Centre Edge
69043430 SHA320x1150-SS HD Half Arrow - Semi Spade Centre Edge
69037843 SHA320x800 HD Half Arrow - 800mm Wear Edge
69037844 SHA320x1150 HD Half Arrow - 1150mm Wear Edge
69038249 SHA320x350-HL HD Half Arrow - L/H Corner Edge
69038250 SHA320x350-HR HD Half Arrow - R/H Corner Edge
24
WELD�ON HEEL SHROUDS
69042888 SHS40x1100-LHD 1100mm Wide LHD Heel Shroud
69041891 SHS40x190-LHD LHD Small Heel Shroud
69044147 SHS50x1100-LHD 50mm LHD Long Heel Shroud
69040888 SHS50x190-LHD Heel Shroud
69040887 SHS50x250-LHD LHD Heavy Duty Heel Shroud
BU00071830 SHS40x190-23K LHD Small Heel Shroud
BU00071831 SHS50x190-23K Heel Shroud
BU00071832 SHS50x250-23K LHD Heavy Duty Heel Shroud
BU00071833 SHS40x1100-23K 1100mm Wide LHD Heel Shroud
BU00071834 SHS50x1100-23K 50mm LHD Long Heel Shroud
MECHANICAL HEEL SHROUDS

BC00001805 SMHS50-AP4L Quad Adapter Left Hand
BC00001578 SMHS50-AP4R Quad Adapter Right Hand
69043688 SMHS50-APL Mechanical Heel Shroud Adapter Left Hand
69043689 SMHS50-APR Mechanical Heel Shroud Adapter Right Hand
69043686 SMHS50-L Kit Mechanical Heel Shroud Nut Kit L/H
69043687 SMHS50-R Kit Mechanical Heel Shroud Nut Kit R/H
69044154 SMHS50x200-L Heel Shroud Left Hand
69044155 SMHS50x200-R Heel Shroud Right Hand
69044156 SMHS50x200-XLL LHS Extra Large Leading Heel Shroud
69044157 SMHS50x200-XLR RHS Extra Large Leading Heel Shroud
25
PLATE PROFILE BAR
Weld-on plate profile bar to suit 40mm lip
69037873 SPB1x290
with 1 x 290mm wide centre shroud
69037874 SPB1x420
69037875 SPB2x290
with 2 x 290mm wide centre shrouds
69037876 SPB2x330
69042872 SPB1-C4800
69042873 SPB2-C4800
CAST PROFILE BAR

69043991 SCPB50-SLL Cast Profile Bar Straight Long Left
69043992 SCPB50-SLR Cast Profile Bar Straight Long Right
69043993 SCPB50-SSL Cast Profile Bar Straight Short Left
69043994 SCPB50-SSR Cast Profile Bar Straight Short Right
69043995 SCPB50x290 Cast Profile Bar Centre Casting 290mm
69043999 SHSBP50x200-CBL Cast Profile Bar BP2 Front Heel Shroud Left
69044000 SHSBP50x200-CBR Cast Profile Bar BP2 Front Heel Shroud Right
69044001 SHSHA50x200-CBL Cast Profile Bar HA Front Heel Shroud Left
69044002 SHSHA50x200-CBR Cast Profile Bar HA Front Heel Shroud Right
BU00067342 SCB55x300-23K Straight Bar to suit 55mm CPB Kit
BU00067343 SCB55x232-23K Heel Shroud to suit 55mm CPB Kit
26
B15-1334ENG © Sandvik Mining and Rock Solutions 2022 – SANDVIK, SHARK, BLUEPOINTER and MAKO
are registered trademarks owned by Sandvik Intellectual Property AB in Sweden and other countries.
SHARKTM GROUND ENGAGING TOOLS

GET MORE FROM YOUR BUCKET
For more information to visit website:

www.rocktechnology.sandvik/en/parts-and-services/ground-engaging-tools-and-buckets/ground-engaging-tools/

sandvik-shark

Uploaded by

Copyright:

Available Formats

sandvik-shark

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

sandvik-shark

Uploaded by

Copyright:

Available Formats

SHARKTM GROUND ENGAGING TOOLS

GET MORE FROM YOUR BUCKET

• Weld-on and Mechanical Heel Shrouds

• Plate Profile Bars and Cast Profile Bars

Bucket without GET Bucket with SHARKTM GET

EXTEND BUCKET LIFE

As the condition of a loader bucket deteriorates,

Typical bucket wear problems include:

• reduced penetration due to wear of

• higher fuel usage due to the machine

• more wear and tear on consumables such

• reduced loading. The volume of dirt shifted

SHARKTM GET IN ACTION

Bucket Type Capacity Loss/Cycle Total Production Loss

GET protected 5% 12,900 tonnes/year

Bucket Type Production Saved Production Savings

GET protected 39,100 tonnes/year 10.3 million USD/year

BLUE POINTERTM 2 EXTENDED

MECHANICAL HEEL SHROUD

BLUE POINTERTM 2 HEAVY DUTY

2001 quicker change-out times.

GET TO KNOW THE SHARKTM FAMILY

Weld-on Heel Shrouds (W)

Mechanical Heel Shrouds (M)

Plate Profile Bar (W)

50mm Cast Profile Bar (W)

55mm Cast Profile Bar (W)

Half Arrow Series (W)

Blue PointerTM 2 Series (M)

(*) Subject to certain mining applications and conditions

NEW CORNER SHROUDS DESIGN

NEW PIN ASSEMBLY

NEW CAST CORNERS

SHROUD LIFTING DEVICE

Hover your phone camera or QR code

Sectional view of Blue Pointer™ 2 Worn lip

HALF CORNER SHROUDS

Worn corner shrouds Standard corner shrouds Half corner shrouds

BLUE POINTER™ 2 – 32MM STANDARD

BLUE POINTER™ 2 – 50MM STANDARD

BLUE POINTER™ 2 – HEAVY DUTY

BLUE POINTER™ 2 – EXTENDED

• Suits 50mm thick primary lips.

Type Model BP32mm BP50mm BPHD BPE

The Half Arrow Series is a range of weld-on lip ADVANTAGES

• Constructed from custom high-performance, • Extend bucket service life.

HALF ARROW – LIGHT DUTY

HALF ARROW – HEAVY DUTY

HALF ARROW COMPATIBILITY

Type Model HA Light duty HA Heavy Duty

Shark™ heel shrouds protect the external weld seams BENEFITS

• Available in different sizes and types to better suit • 40mm

Single weld-on Heel Shrouds

Long weld-on Heel Shroud

Shark™ mechanical heel shrouds (MHS) protect the BENEFITS

Shark™ Profile Bars protect the rear underside faces of BENEFITS

CAST PROFILE BARS

Shark™ Cast Profile Bars protect the rear underside ADVANTAGES

50MM BLUE POINTERTM 2 � STANDARD

50MM BLUE POINTERTM 2 � EXTENDED