Repol SRM100NC is recommended for Injection Moulding and stretch blow moulding process. It is an ideal material for making high clarity containers, houseware, syringes and ISBM products. The grade contains clarifier and antistatic agent that reduces static charge build-up on products. Repol SRM100NC complies with the systemic and intracutaneous tests with four different extractants as per USP XXIX and I.P 96. The grade also complies with undue toxicity test as per E.P. and skin irritation test as per I.S.
Typical Characteristics Property Test Method Unit Typical Value* o Melt Flow Rate (230 C/2.16 kg) ASTM D1238 gm/10 min 12 Tensile Strength at Yield (50mm/min) ASTM D638 MPa 30 Elongation at Yield (50mm/min) ASTM D638 % 12 Flexural Modulus (1% secant) ASTM D790A MPa 1100 Notched Izod Impact Strength(23oC) ASTM D256 J/m 65 o Heat Deflection Temperature(455 kPa) ASTM D648 C 95 o Melting Temperature(DSC second heating) ASTM D3418 C 150
* Typical values, not to be taken as specification. All the mechanical properties as per ASTM D638 Type I specimen injection moulded in accordance with ASTM D4101
Applications Clarified random copolymer, rigid containers, houseware, ISBM bottles, syringes Regulatory Information • Meets the requirements stipulated in IS 10910 on ‘Specification for Polypropylene and its Copolymers for safe use in contact with foodstuff, pharmaceuticals, and drinking water’. Additives incorporated in this grade conform to the positive list of constituents as prescribed in IS 10909. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177.1520, Olefin polymers • Storage Recommendations Bags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight
Swastik Mill Compound, V. N. Purav Marg, Chembur, Mumbai-400 071. Tel.: +91-22-6767 7000. E-mail: polymer_patsupport@ril.com Website: www.ril.com
• The information and data presented herein is true and accurate to the best of our knowledge. No warranty or guarantee expressed or implied, is made regarding performance or otherwise. This information and data may not be considered as a suggestion to use our products without taking into account existing patents, or legal provisions or regulations, whether national or international. • The user of any information and/or data is advised to obtain the latest details from any of the offices of the company or its authorised agents, as the information and/or data is subject to change based on the research and development work undertaken by the company. Updated as of Jan, 2008
