Nothing Special   »   [go: up one dir, main page]
Scribd
Upload
95 views2 pages

Linear Low Density Polyethylene Injection Molding

Uploaded by

akshay

This document provides information on LLDPE M2550, a butene co-monomer based linear low density polyethylene. It has excellent flow and processability as well as good warpage resistance. Typical properties include a melt flow index of 50.0 g/10min and a density of 0.926 g/cm3. It is recommended for applications like masterbatch and compounding, housewares, and thin walled containers. The polyethylene has a tensile strength of 13 MPa and elongation at break over 400%. It is suitable for injection molding with a recommended processing temperature between 180-220°C and meets regulatory standards for food contact.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Linear Low Density Polyethylene Injection Molding

Uploaded by

akshay
95 views2 pages
This document provides information on LLDPE M2550, a butene co-monomer based linear low density polyethylene. It has excellent flow and processability as well as good warpage resistance. Typical properties include a melt flow index of 50.0 g/10min and a density of 0.926 g/cm3. It is recommended for applications like masterbatch and compounding, housewares, and thin walled containers. The polyethylene has a tensile strength of 13 MPa and elongation at break over 400%. It is suitable for injection molding with a recommended processing temperature between 180-220°C and meets regulatory standards for food contact.

Original Description:

COA LLDPE M2550

Original Title

LL M2550

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

This document provides information on LLDPE M2550, a butene co-monomer based linear low density polyethylene. It has excellent flow and processability as well as good warpage resistance. Typical properties include a melt flow index of 50.0 g/10min and a density of 0.926 g/cm3. It is recommended for applications like masterbatch and compounding, housewares, and thin walled containers. The polyethylene has a tensile strength of 13 MPa and elongation at break over 400%. It is suitable for injection molding with a recommended processing temperature between 180-220°C and meets regulatory standards for food contact.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
95 views2 pages

Linear Low Density Polyethylene Injection Molding

Uploaded by

akshay
This document provides information on LLDPE M2550, a butene co-monomer based linear low density polyethylene. It has excellent flow and processability as well as good warpage resistance. Typical properties include a melt flow index of 50.0 g/10min and a density of 0.926 g/cm3. It is recommended for applications like masterbatch and compounding, housewares, and thin walled containers. The polyethylene has a tensile strength of 13 MPa and elongation at break over 400%. It is suitable for injection molding with a recommended processing temperature between 180-220°C and meets regulatory standards for food contact.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2

Provisional Technical Datasheet

Linear Low Density Polyethylene Injection Molding

Product Description:
LLDPE M2550 is a butene co-monomer based linear LLDPE M2550 is recommended for following
low density grade produced with the latest Ineos applications:
Gas Phase polymerization Technology exhibiting ü Masterbatch & Compounding
following features: ü Housewares
ü Excellent Flow & Processability ü Thin walled containers & Lids
ü Good warpage resistance. ü Suitable for faster molding cycle.

Typical Properties:

Sr. No. Properties Test Method Units Values*


Physical Properties
1 Melt Flow Index ( 190oC & 2.16 kg) ASTM D1238 g / 10 min 50.0
0 3
2 Density (at 23 C) ASTM D1505 gm/cm 0.926
Mechanical Properties
3 Tensile Strength @ Yield (50mm / min) ASTM D638 MPa 13
4 Elongation @ Break (50mm / min) ASTM D638 % >400
5 Flexural Modulus ASTM D 790A Mpa 400
0
6 Vicat Softening Point (10N) ASTM D 1525 C 95

* Mechanical Properties tested on Injection molded specimen in accordance with ASTM D4101 and conditioned as per ASTM D618.
* Typical Values and not to be taken as specification limits, values may change without any prior notice.

0
Recommended Processing Temperature: 180 – 220 C

Disclaimer: OPaL assumes no liability whatsoever in respect of application, processing or any use made of the afore - mentioned information or products, or any
consequence thereof. The user undertakes all liability in respect of the application, processing or use of the afore - mentioned information or product, whose quality and
other properties he shall verify, or any consequence thereof. No liability whatsoever shall attached to any of the OPaL companies for any infringement of the rights owned or
controlled by a third party in intellectual, industrial or other property by reason of application, processing or use of the afore-mentioned information or products by the user.

Contact: ONGC Petro Additions Ltd., Polymer Marketing Group: 1st Floor, Omkara Complex, Sai Chowkdi, Manjalpur, Vadodara 390011, Gujarat,India
Telephone: +91 265 6192600, Fax: +91 265 6192666, Corporate Site: www.opalindia.in PARC/2016/03 - 00
Provisional Technical Datasheet

Regulatory Requirements:
LLDPE grade M2550 shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use
in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet
the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall also
comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.

Storage & Handling:

Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location
should be dry, dust free and the Storage temperature should not exceed 50 oC. Non - compliance to these precautionary
measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance.

Health and Safety Information:

The product described herein may require precautions in handling and use because of toxicity, flammability, or other
consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this
material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for
the product under consideration for use.

Disclaimer: OPaL assumes no liability whatsoever in respect of application, processing or any use made of the afore - mentioned information or products, or any
consequence thereof. The user undertakes all liability in respect of the application, processing or use of the afore - mentioned information or product, whose quality and
other properties he shall verify, or any consequence thereof. No liability whatsoever shall attached to any of the OPaL companies for any infringement of the rights owned or
controlled by a third party in intellectual, industrial or other property by reason of application, processing or use of the afore-mentioned information or products by the user.

Contact: ONGC Petro Additions Ltd., Polymer Marketing Group: 1st Floor, Omkara Complex, Sai Chowkdi, Manjalpur, Vadodara 390011, Gujarat,India
Telephone: +91 265 6192600, Fax: +91 265 6192666, Corporate Site: www.opalindia.in PARC/2016/03 - 00

You might also like