24-0383

Taiga Apparel Pvt. Ltd.

PRE PRODUCTION AND RISK ASSESSMENT MEETING
JC# PO/LINE NUMBER BUYER STYLES# PPR REVIEW DATE Wash Code SS Tal#

WO-20295 NAPKBC3831371/15332403 BESTSELLER A/S WOMAN ONLY-CARMAKOMA 22-Aug-2024 3954 240146823

15332403 CARWILLY HIGH
WAIST FLARED DARK BLUE
DENIM JEAN TAI021 NOOS

GENERAL CHECK LIST CORRECTIVE MEASURE

Description Yes No N/R Description Yes No N/R
PPR's Garments þ ¨ ¨ Security Seam on Pocket Bag þ ¨ ¨
Original Sample þ ¨ ¨ Poly Bag on Care Label þ ¨ ¨
Initial Tech Pack þ ¨ ¨ Emberiodery Before Wash ¨ ¨ ¨
Before Wash Trim Card ¨ þ ¨ Emberiodery After Wash ¨ ¨ ¨
Customer Comments þ ¨ ¨ Printing ¨ ¨ þ
Customer Size Chart þ ¨ ¨ Re-Inforce under Bk/Pkt þ ¨ ¨
After Wash Trims Card ¨ þ ¨ Re-Inforce under loop btks þ ¨ ¨
Mock Up If Any ¨ þ ¨ Patches under Destroy effects ¨ ¨ þ
Rip & Repair on Patches ¨ ¨ þ
Heat Seal / Patches ¨ ¨ þ
CUTTING / TECHNICAL / SEWING
Description Yes No N/R Remarks
Fusing þ ¨ ¨ 6925 WHITE fusing required in both parts of the waist band & single fly .
Waist Band Cutting Direction þ ¨ ¨ 02 parts
Waist Band Height þ ¨ ¨ 4 cm
Small Parts Fabric Grains þ ¨ ¨ ok as per sample .
Fly Length / Zipper Size ¨ þ ¨ follow tech pack and specs
Coin Pocket Width ¨ þ ¨ follow tech pack and specs
Back Pocket Measure ¨ þ ¨ follow tech pack and specs
Loop Measure [LxW] ¨ ¨ ¨ 5.5 x1.1 cm
Bottom Workmanship ¨ ¨ ¨ 1.2 cm
Security tack on Bottom ¨ ¨ ¨ Not required
Cut & Sew if any ¨ ¨ ¨ Not required
Printing ¨ ¨ ¨ Not required
Other 1 ¨ ¨ ¨ Not required
Other 2 ¨ ¨ Not required
¨
SPECIAL INSTRACTION
1 Laycra precautions must be apply.
2 During spreading plies height must be maximum 3~3.5"inch for super stretch fabric and maximum 4 inch for normal & non
streched fabrics.
3 During spreading maximum lay lenght must be 9~10 meters.
4 Re - inforcements required under the seams of back pocket and side back loops .
5 ECRU pc required as per std.
6 TOP sample required in size 44 & 46 .
7 Bk pocket hemming must be straight .
8 Avoid ropping at bk riser .
9 J.stitch & coin pkt attachement needle gauge will be 5mm .
10 Threads combination as per approved sample and tech pack .
11 Avoid fullness at back pocket .
12 Avoid broken stitches at bk pocket as it is found inn the PPR .
13 Work order 21407 Repeat of 20295 with same wash code 3954 , Security stitch is REQUIRED as per previous
14 Work order 21756 Repeat of 20295 with same wash code 3954 , Security stitch is REQUIRED as per previous

DRY PROCESS / WASHING

Description Yes No N/R Remarks

Dry Process ¨ þ ¨
Ripping / Destroy Effects ¨ ¨ þ
Handfeel / Abrision þ ¨ ¨
Rendom Effects Appearence ¨ ¨ þ
General Appearence ¨ þ ¨

Meeting Attendants: Cutting,Finishing & Packing,Industrial Engineering,Laundry-GWP,Quality Assurance,Quality Control,Sales & Merchandising,Sewing,Technical

Print Date/Time: 22-Aug-2024 12:38 pm Page 1 of 2

 24-0383
Taiga Apparel Pvt. Ltd.
PRE PRODUCTION AND RISK ASSESSMENT MEETING
JC# PO/LINE NUMBER BUYER STYLES# PPR REVIEW DATE Wash Code SS Tal#

WO-20295 NAPKBC3831371/15332403 BESTSELLER A/S WOMAN ONLY-CARMAKOMA 22-Aug-2024 3954 240146823

15332403 CARWILLY HIGH
WAIST FLARED DARK BLUE
DENIM JEAN TAI021 NOOS
SPECIAL INSTRACTION
1 Shade is darker ,red ,blue
2 Spary is less .
3 Available pattrens used for whiskers ,be care full in the bulk.
4 Pilling found at pkt bage ,be care full in the bulk.
5 Back pocket stutches founfd brokens in the PPR , be care full in the bulk.
6 Garments not clean well pilling found .
FINISHING / PACKING
Description Yes No N/R Remarks
Button / Rivets ¨ þ ¨ Follow tech pack
Pressing ¨ þ ¨
Packing Trims ¨ þ ¨ Follow tech pack
Pack & Folding ¨ þ ¨ Follow tech pack
Carton Requirements ¨ þ ¨ Follow tech pack
SPECIAL INSTRACTION
1 Garments must be free of extra / hanging threads
2 Make sure to fasten all buttons nice & securely.
3 press should be marks free.
4 Avoid pilling at pkt bage ,must be clean before packing .

Meeting Attendants: Cutting,Finishing & Packing,Industrial Engineering,Laundry-GWP,Quality Assurance,Quality Control,Sales & Merchandising,Sewing,Technical

Print Date/Time: 22-Aug-2024 12:38 pm Page 2 of 2