Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    B60 ER329N Metrode

    Uploaded by

    Mohamed Adel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    B60 ER329N Metrode

    Uploaded by

    Mohamed Adel
    20 views1 page

    Original Title

    B60-ER329N-Metrode

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views1 page

    B60 ER329N Metrode

    Uploaded by

    Mohamed Adel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    ER329N

    SOLID WIRES FOR TIG, MIG AND SAW

    PRODUCT DESCRIPTION
    Solid TIG, MIG and sub-arc wires for welding 2205 type duplex stainless steels.

    SPECIFICATIONS ASME IX QUALIFICATION

    STAINLESS STEELS
    AWS A5.9M ER2209 QW432 F-No 6
    BS EN ISO 14343-A 22 9 3 N L QW442 A-No 8
    BS EN ISO 14343-B SS2209
    Approvals DNV, TÜV For TIG wires

    CHEMICAL COMPOSITION (WIRE WT %)


    C Mn Si S P Cr Ni Mo Cu N
    Min. -- 1.0 0.25 -- -- 22.5 8.0 3.0 -- 0.14
    Max. 0.03 2.0 0.65 0.020 0.030 23.5 9.5 3.5 0.3 0.20
    Typical 0.015 1.6 0.5 0.001 0.015 23 8.2 3.2 0.1 0.17*
    Duplex weld metal microstructure with austenite + 30-50% ferrite.
    Pitting resistance equivalent PREN = Cr + 3.3Mo + 16N is > 35.
    * ER329N MIG spooled wire is selected for suitability for both MIG and auto-TIG, with typically 0.15%N to control porosity.

    ALL-WELD MECHANICAL PROPERTIES


    Typical
    As welded Min.
    TIG MIG SAW + SSB
    Tensile strength (MPa) 690 790 800-835 790
    0.2% proof strength (MPa) 450 620 560-620 630
    Elongation (%) 4d 20 36 28-35 30
    5d 20 33 30 27
    Impact ISO-V(J) - 30°C -- 180 (> 140) > 70 75 (>55)
    - 50°C -- 180 (> 120) > 60 55 (>35)
    - 75°C -- 125 (>70) -- --
    Hardness HV -- 270 (< 310) 270 (< 310) 275 (< 320)
    HRC -- 23 (< 28) 23 (< 28) 23 (< 28)

    TYPICAL OPERATING PARAMETERS


    Shielding gas Current Diameter (mm) Parameters
    TIG Argon DC- 1.6 / 2.4 100A, 12V
    MIG Ar / He / CO2 pulsed 1.2 180A, 28V
    SAW SSB flux * DC+ 2.4 350A,30V

    PACKAGING DATA
    Diameter (mm) 0.8 1.0 1.2 1.6 2.0 2.4 3.2
    TIG -- -- 2.5 kg tube 2.5 kg tube 2.5 kg tube 2.5 kg tube 2.5 kg tube
    MIG 15kg reel 15kg reel 15kg reel 15kg reel -- -- --
    SAW -- -- -- 25kg coil To order 25kg coil 25kg coil

    FUME DATA
    MIG fume composition (wt %) (TIG and SAW fume negligible)
    Fe Mn Cr3 Ni Mo Cu OES (mg/m3)
    28 10 20 8 1.5 < 0.5 2.5

    www.metrode.com DS B-60-ER329N | Rev. 01-03/16 191

    You might also like