PRO1410HD Pioneer
PRO1410HD Pioneer
PRO1410HD Pioneer
(
Pass PN and PM.
Pass PV,PM and PN.
10-26
PK22
EYEBOLTS-M8*15KFE
29N01501 x 2pcs.
PK23
WARRANTY ENVELOPE(100*220)
78047921
PK17
BAG,POLYETHYLENE(150*370)
24813191
PK20
BATTERY,DRY CELL R03 UB
4S490003
PK18 CLAMP(RST-1N)
29C01511 x 5pcs.
PK19 FERRITE CORE ZCAT2032-930
6S170005 x 2pcs.
PK21 CORE,FERRITE SFT-72SNB
6S170003 x 2pcs.
PX-61XM3A
A) BRACKET SASSY
B) ACCESSORY SASSY
Put the EYEBOLTS-MB*15KFE in the
WARRANTY ENVELOPE(100*220).
Then, roll and fasten it with a tape.
Accommodated in the wrapped style.
BRACKET SASSY
Fold it into an adequate size and
fasten it with an adhesive tape.
Wire harness bandages
x 2pcs.
Attached to the core
METHOD OF PACKAGING
11-1
C) ACCESSORY BOX (W)
SHT003 NOTICE SHEET US (PDP)
78038622
NOTICE SHEET
SHT002 OPERATION 50XM4A/61XM3A
7S801381
OPERATION
SHT001 INFORMATION 61XM3A
7S801371
INFORMATION
BAG
PK16 REM-T HAND UNIT RP-114
3S120221 (Contained in a bag.)
ACCESSORY BOX(W)
A
PK15 ACCESSORY BOX(W)
29MS1641
PSC POWER CORD U3 L3.0M L
7S552001
(Contained in the bagged state.)
Front paper:
Align its direction
and put it in.
SUPPLEMENT SHEET
SUPPLEMENT SHEET
SUPPLEMENT SHEET
SUPPLEMENT SHEET
Cables
and others
Accommodation layout diagram
Seen from Arrow A
Name Titled
Circuit
Symbol
Material Name Material Code
Quantity
Needed
Nil
Nil
Nil
Nil
Nil
Nil
Nil Nil Nil
POWER CORD
INFORMATION
OPERATION
NOTICE SHEET
SUPPLEMENT
SHEET
INFORMATION 61XM3A
OPERATION 50XM4A/61XM3A
NOTICE SHEET US (PDP)
POWER CORD U3 L3.0M L
POWER CORD U3 L3.0M L
11-2
PK14 CARTON BOX T(61XM3)
29MS3091
PK07 CUSHION(TR)
29MS2631
PK06 CUSHION(TC)
PK05 CUSHION(TL)
29MS2621
29MS2611
PK15
ACCESSORY BOX(W)
29MS1641
PK13 INNER CARTON
PK13 INNER CARTON
29MS2701
29MS2701
PK03 PROTECTION SHEET
29M00231
PK10 CUSHION(BR)
29MS2661
PK12 CUSHION(BTM-R)
29MS2681
PK09 CUSHION(BC)
29MS2651
PK04
CARTON BOX(B)
29MS0441
PK08 CUSHION(BL)
29MS2641
PK11 CUSHION(BTM-L)
29MS2671
PROTECTION SHEET
Positioned on the right as seen
from the front so that the usage
arrow mark face the front plane
of the set.
Positioned on the right as seen
from the front so that the usage
arrow mark face the front plane
of the set.
To be laid and wrapped beneath
the set.
Positioned so that the arrow mark
faces the front plane of the set.
Positioned so that the arrow mark
faces the front plane of the set.
Positioned so that the arrow mark
faces the front plane of the set.
Positioned so that the arrow mark
faces the front plane of the set.
To be folded
inside
(4 positions)
Positioned on the left as seen
from the front so that the usage
arrow mark face the front plane
of the set.
Rear Side
Fastened with a tape in 5 positions.
The ashesive tape to be used is:
Paper adhesive tape 30mm*18mm:
92203227 or Paper adhesive tape
19mm*18mm: 92203226
Positioned on the left as seen from
the front so that the usage arrow mark
face the front plane of the set.
Make sure the section, half-cut
here, is positioned to face the front.
Make sure the section, half-cut
here, is positioned to face the front.
D) CUSHION, INNER, CARTON BOX
11-3
Notes:
1. Parts orders must contain model name, parts number and parts name.
2. When you place an order for spare parts, please refer to the respective service
manual and mention the right parts number on your P.O. sheets
3. The letters NSP in the table indicate non-service parts.
4. Please refer to METHOD OF DISASSEMBLY or PACKAGING of service manual
about a parts layout.
PX-61XM3A(01272282) VER.46
SYMBOL PARTS NAME PARTS NO. Q'TY NOTE
*** PDP MODULE ***
PDP PDP-NP61C2MF01 3S361002 1
*** PWB ASSYS ***
A01 MAIN1 PWB ASSY 937G3M01 1
A02 232C PWB ASSY 937F7SA1 1
A03 CTL PWB ASSY 937F7SB1 1
A04 PWR PWB ASSY 937F7SC1 1
A05 LED PWB ASSY 937F7SD1 1
A06 SENB PWB ASSY 937F7SE1 1
A07 SENC PWB ASSY 937F7SF1 1
A08 SEND PWB ASSY 937F7SG1 1
A09 AUDIO PWB ASSY 937F7SH1 1
A10 CCD PWB ASSY 937F6C01 1
PSU POWER UNIT 3S110164 1
*** MISCELLANEOUS ELECTRICAL PARTS ***
CN-AD CABLE 31P L390 7S530036 1
CN-AU CN 7P(AU) 1000W,2791-28 7SW7W001 1
CN-FG CABLE 1P L400 7S530027 1
CN-LD CN 5P(LD) 225,2468-26 7SU509LD 1
CN-PA CN 6P(PA) 650,2468-26 7SU626PA 1
CN-PD CN 10P(PD) 920W,1007-20 7SW0W010 1
CN-PH CN 9P(PH) 360W,1007-20 7SW9W008 1
CN-PI CN 2-WP(PI) 360W,1672-18 7SWXV002 1
CN-PM CN 7P(PM) 450,2468-26 7SU718PM 1
CN-PN CN 12P(PN) 475,2468-26 7SUB19PN 1
CN-PV CN 8P(PV) 525,2468-26 7SU821PV 1
CN-PW CN 8P(PW) 300,2468-26 7SC812PW 1
CN-RS CN 12P(RS) 200,2468-26 7SCB08RS 1
CN-SW1 CN 3P(SW) 1050W,2468-26 7SB3W007 1
CN-SW2 CN 3P(SW) 325W,2468-26 7SW3W007 1
CN-TM CN 4P(TM) 600,2468-26 7SC424TM 1
CN-TR CN 4P(TR) 900,2468-26 7SC436TR 1
CN-TS CN 4P(TS) 1075,2468-26 7SC443TS 1
E01 FAN MOTOR 9G1212M4D03 3S170014 2
E02 FAN MOTOR 9G1212M4D04 3S170015 1
E03 AC INLET 10DKDG3S(Y1) 6S760016 1
FL11 CORE,FERRITE SFT-72SNB 6S170003 1
FL12 CORE,FERRITE SFT-72SNB 6S170003 1
FL21 FERRITE CORE ZCAT2032-930 6S170005 1
FL22 FERRITE CORE ZCAT2032-930 6S170005 1
FL23 FERRITE CORE ZCAT2032-930 6S170005 1
FL24 FERRITE CORE ZCAT2032-930 6S170005 1
FL25 FERRITE CORE ZCAT2032-930 6S170005 1
Use this parts list with the contrast table[for PDP-614MX, PRO-1410HD]. (Refer to P6-1)
12-1
PARTS LIST
SYMBOL PARTS NAME PARTS NO. Q'TY NOTE
FL26 FERRITE CORE ZCAT2032-930 6S170005 1
FL27 FERRITE CORE ZCAT2032-930 6S170005 1
FL28 FERRITE CORE ZCAT2032-930 6S170005 1
FL29 FERRITE CORE ZCAT2032-930 6S170005 1
FL41 CORE,FERRITE SFT-72SNB 6S170003 1
FL42 FERRITE CORE(ESD-R-19) 6S170007 1
FL43 FERRITE CORE ZCAT2032-930 6S170005 1
*** MECHANISM PARTS ***
SRW01 TP-M3*6*3KF 24N04581 3
SRW02 TP-M3*6*3KF 24N04581 2
SRW03 CBIPS*4*12*15KFE 29N01401 8
SRW04 PL-CPIMS*3*6*15KFE 29N01421 30
SRW05 PL-CPIMS*6*20*15KFE 29N01451 8
SRW06 PL-CPIMS*6*20*15KFE 29N01451 2
SRW07 PL-CPIMS*4*12*15KFE 29N01441 10
SRW08 PL-CPIMS*4*12*15KFE 29N01441 10
SRW09 PL-CPIMS*4*12*15KFE 29N01441 6
SRW10 PL-CPIMS*4*12*15KFE 29N01441 3
SRW11 PL-CPIMS*4*12*15KFE 29N01441 3
SRW12 PL-CPIMS*4*12*15KFE 29N01441 4
SRW13 PL-CPIMS*4*12*15KFE 29N01441 2
SRW14 PL-CPIMS*4*12*15KFE 29N01441 6
SRW15 CBIPS*3*8*3KF 24N03691 7
SRW16 SCREW(UNC4-40/4-40) 32990229 4
SRW17 TP-M3*6*3KF 24N04581 5
SRW18 NOT USED
SRW19 SCREW(UNC4-40/4-40) 32990229 2
SRW20 TP-M3*6*3KF 24N04581 1
SRW21 CBIPS*3*8*3KF 24N03691 2
SRW22 CPIMS*NO.6-32UNC*8*3GF 29N01131 2
SRW23 TP-M3*6*3KF 24N04581 2
SRW24 ET-CBIMS*4*8*3KF 24N04001 1
SRW25 TP-M3*6*3KF 24N04581 3
SRW26 TP-M3*6*3KF 24N04581 1
SRW27 TP-M3*6*3KF 24N04581 3
SRW28 TP-M3*6*3KF 24N04581 2
SRW29 TP-M3*6*3KF 24N04581 3
SRW30 CFIMS3*30*15KFE 29N01481 6
SRW31 PL-CPIMS*4*12*15KFE 29N01441 8
SRW32 CBIPS*4*12*15KFE 29N01401 12
SRW33 PL-CPIMS*4*12*15KFE 29N01441 27
SRW34 PL-CPIMS*4*16*3KF 910E4066 4
SRW35 PL-CPIMS*3*10*15KFE 29N01431 14
SRW36 PL-CPIMS*4*12*15KFE 29N01441 4
SRW37 TP-M3*6*3KF 24N04581 2
M01 BUSHING,INSULATOR 24282991 3
M02 NOT USED
M03 SERIAL LABEL 24L44731 1
M04 EDGING SADDLE(EDS-1208U) 29C00461 3
M05 CLAMP(LCT-1S) 29C00551 1
M06 NOT USED
M07 CLAMP(RFCC-625) 29C01721 1
M08 NOT USED
M09 CLAMP(RBWS-5N) 29C01741 2
M10 CLAMP(UAMS-05-2) 29C01751 7
M11 NOT USED
12-2
SYMBOL PARTS NAME PARTS NO. Q'TY NOTE
M12 NOT USED
M13 NOT USED
M14 NOT USED
M15 NOT USED
M16 FRONT PANEL(61XM2) 29D00612 1
M17 INLET COLLAR 29F00481 2
M18 HANDLE 29F00591 2
M19 COVER SW 29F00721 1
M20 CORNER PIECE LT 29F00731 1
M21 CORNER PIECE RT 29F00741 1
M22 CORNER PIECE LB 29F00751 1
M23 CORNER PIECE RB 29F00761 1
M24 COVER CTL 29F00781 1
M25 POWER BUTTON(50XM3) 29G00281 1
M26 CONTROL BUTTON 29G00311 1
M27 SHIELD PLATE MAIN(42XM3) 29H03541 1
M28 TERMINAL PANEL M(50XM3) 29H02551 1
M29 TERMINAL PANEL S(50XM3) 29H02561 1
M30 1 NOT USED
M31 GS COVER 29H02782 1
M32 F-BRACKET LR(IN) 29H02941 2
M33 F-BRACKET T(IN) 29H02951 1
M34 F-BRACKET B(IN) 29H02961 1
M35 F-BRACKET LR(OUT) 29H02971 2
M36 F-BRACKET T(OUT) 29H02981 1
M37 F-BRACKET B(OUT) 29H02991 1
M38 BRACKET SENSOR 29H03001 1
M39 BRACKET MAIN(61XM3) 29H03601 1
M40 SHIELD COVER MAIN 29H03021 1
M41 FAN BRACKET 29H03031 1
M42 TERMINAL PANEL B(61XM2) 29H03191 1
M43 SHIELD CABLE 29H03231 1
M44 BRACKET PC 29H03392 2
M45 BARRIER(INLET) 29J01321 1
M46 NOT USED
M47 SILICONE SHEET(AUDIO)T 29J01291 1
M48 CUSHION(782*10*T5) 29J01171 2
M49 CUSHION(686*10*T5) 29J01181 4
M50 INDICATOR(50XM3) 29K00421 1
M51 TERMINAL SHEET B(61XM2) 29K00551 1
M52 TERMINAL SHEET M(50XM3)W 29K00571 1
M53 TERMINAL SHEET S(50XM3)W 29K00581 1
M54 FILTER(61A) 29KS0211 1
M55 AC IN LABEL 29L00491 1
M56 SPEAKER LABEL 29L03552 1
M57 NAME PLATE(61XM3A) 29L05811 1 NSP
M58 BACK COVER(61XM2) 29P01271 1
M59 BRACKET PS ASSY 29HS0822 1
M60 CHASSIS L ASSY 29PS0881 1
M61 CHASSIS R ASSY 29PS0891 1
M62 SHIELDING TAPE AL(25*50M) 29C01911 1roll 4250mm/SET
M63 NOT USED
M64 CLAMP(RLWC-2SV0) 29C01901 34
M65 NOT USED
M66 NOT USED
M67 NOT USED
M68 NOT USED
12-3
SYMBOL PARTS NAME PARTS NO. Q'TY NOTE
M69 NOT USED
M70 CLAMPER,WIRE (D8.3) 24C00101 1
M71 AUDIO HEAT SINK 29H03561 1
M72 CUSHION(FILTER) 29J01331 3
*** PRINTED & PACKING MATERIALS ***
PSC POWER CORD U3 L3.0M L 7S552001 1
SHT001 INFORMATION 61XM3A 7S801371 1
SHT002 OPERATION 50XM4A/61XM3A 7S801381 1
SHT003 NOTICE SHEET US (PDP) 78038622 1
PK01 STOPPER 24282431 2
PK02 JOINT 24CS0551 4
PK03 PROTECTION SHEET 29M00231 1
PK04 CARTON BOX(B) 29MS0441 1
PK05 CUSHION(TL) 29MS2611 1
PK06 CUSHION(TC) 29MS2621 1
PK07 CUSHION(TR) 29MS2631 1
PK08 CUSHION(BL) 29MS2641 1
PK09 CUSHION(BC) 29MS2651 1
PK10 CUSHION(BR) 29MS2661 1
PK11 CUSHION(BTM-L) 29MS2671 1
PK12 CUSHION(BTM-R) 29MS2681 1
PK13 INNER CARTON 29MS2701 2
PK14 CARTON BOX T(61XM3) 29MS3091 1
PK15 ACCESSORY BOX(W) 29MS1641 1
PK16 REM-T HAND UNIT RP-114 3S120221 1
PK17 BAG,POLYETHYLENE(150*370) 24813191 1
PK18 CLAMP(RST-1N) 29C01511 5
PK19 FERRITE CORE ZCAT2032-930 6S170005 2
PK20 BATTERY,DRY CELL R03 UB 4S490003 2
PK21 CORE,FERRITE SFT-72SNB 6S170003 2
PK22 EYEBOLTS-M8*15KFE 29N01501 2
PK23 WARRANTY ENVELOPE(100*220) 78047921 1
PK24 BAR CODE SERIAL LABEL 16761791 1
PK25 NOT USED
PK26 NOT USED
PK27 NOT USED
PK28 NOT USED
PK29 NOT USED
PK30 NOT USED
PK31 MODEL NAME LABEL 29L05951 2 NSP
PK32 NOT USED
12-4
PARTS LIST (PDP-NP61C2MF01)
NAME VER *1
1 PKG61C2F1 02C 9S899790 1
Scanning PKG
2 PKG61C2G1 02A 9S899669 1 Common PKG
3 PKG61C2C1 05C-27 9S899791 1 Digital PKG
Cf. interchangeability list
PKG61C2C1 05D-27 9S899731 1
PKG61C2C1 05C-28 9S899792 1
PKG61C2C1 05D-28 9S899793 1
4 PKG61C2G2 02A 9S899670 1 Common Branch PKG (upper)
Common Branch PKG (lower)
Scanning Relay PKG (upper)
Scanning Relay PKG (lower)
Signal Relay PKG (upper left)
Signal Relay PKG (upper center)
Signal Relay PKG (upper right)
Signal Relay PKG (lower left)
Signal Relay PKG (lower center)
Signal Relay PKG (lower right)
Recovery Relay PKG
5 PKG61C2G3 02A 9S899671 1
6 PKG61C2E1 02B 9S899660 1
7 PKG61C2E2 02B 9S899661 1
8 PKG61C2J1 01B 9S899583 1
9 PKG61C2J2 01B 9S899584 1
10 PKG61C2J3 01B 9S899585 1
11 PKG61C2J4 01B 9S899586 1
12 PKG61C2J5 01B 9S899587 1
13 PKG61C2J6 01B 9S899588 1
14 PKG61C2J7 01A 9S899589 1
PART NAME
PART No. Qty NOTE
PDP MODULE
3
1 2
4
5
6
7
8 9 10
11
12
13
14
*1 : Version number of the Board Assy (PKG) is written down in the Board Assy itself.
12-5
PKG61C2C1
Digital PKG
Replacement Target Version Compatible Version
01A - 00, 01, 02, 03
01B - 03, 05, 07, 11
02A - 03,
02B - 03, 05, 07, 11
02C - 10, 17, 21
03B - 13, 15, 25
03C - 23, 25, 27
04C - 23, 25, 27
04D - 25, 27
05C - 25, 27
05D - 25, 27
01B - 04, 06, 08, 12
02B - 04, 06, 08, 12
02C - 18, 22
03B - 14, 16
03C - 24, 28
04C - 24, 26, 28
04D - 26, 28
05C - 26, 28
05D - 26, 28
Board ASSY interchangeability list (in PDP-NP61C2MF01)
Note:In the Board ASSY (PKG) replacement, You can exchange it in a version of high rank than a
replacement target version besides a compatible version.
Digital PKG follows the following list, and exchange it.
Exchange it for
05C-27 (9S899791)
or
05D-27 (9S899731).
Exchange it for
05C-28 (9S899792)
or
05D-28 (9S899793).
12-6
1
2
3
.
.
.
29
30
31
1
2
3 1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
PD
1
2
3
4 5 6 7 8 9
1
0
PH
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9 1
2
3
4 5 6 7 8 9
1
0
PDP
POWER SUPPLY
M
+
7
V
T
X
D
G
N
D
R
X
D
M
+
5
V
G
N
D
R
E
M
I
N
2
/
R
X
D
R
E
S
E
T
S
W
P
L
E
_
C
T
L
T
X
D
1
G
N
D
R
E
M
C
T
L
1
C
T
L
2
G
N
D
RS
SW
PM
PN
AD
PV
AC
PA
S+12
S+12
S+12
GND
GND
GND
1 GND
2 GND
3 ALARM
4 GND
5 PS+
6 PS-
7 MSEL
8 GND
9 RH+
10 RH-
11 RG+
12 RG-
13 RF+
14 RF-
15 GND
16 RE+
17 RE-
18 RD+
19 RD-
20 RCLK+
21 RCLK-
22 GND
23 RC+
24 RC-
25 RB+
26 RB-
27 RA+
28 RA-
29 GND
30 GND
31 GND
D
+
1
7
5
D
+
1
7
5
(
N
.
C
.
)
D
+
6
5
D
.
G
N
D
D
.
G
N
D
D
+
5
D
.
G
N
D
D
.
G
N
D
A
L
A
R
M
D
.
G
N
D
D
.
G
N
D
D
+
5
D
.
G
N
D
D
.
G
N
D
D
+
6
5
(
N
.
C
.
)
D
+
1
7
5
D
+
1
7
5
M+7V
D.GND
POWER
D.GND
POMUTE
SW7
NC
D+3.3
D+3.3
D+3.3
D.GND
D.GND
D.GND
D+2.5
D+2.5
D+2.5
D.GND
D.GND
D.GND
1
2
3
CTL PWB
CTL1
CTL2
GND
SW
1
2
3
4
5
6
7
1
2
3
4
5
6
AUDIO PWB
AU-L
GND
AU-R
GND
MUTE
SCL7
SDA7
1 2 3 4
R
O
U
T
+
R
O
U
T
-
L
O
U
T
+
L
O
U
T
-
S
+
1
2
S
+
1
2
S
+
1
2
G
N
D
G
N
D
G
N
D
SPEAKER_OUT
1
2
3
4
5
6
7
8
9
10
11
12
232C PWB
RS
M+5V
TXD
GND
RXD
M+3V
GND
REMIN2/RXD
RESET SW
PLE_CTL
TXD1
232SHUT
REM
1
2
3
4
5
6
7
8
PWR PWB
LED PWB
LD
R
E
M
I
N
1
L
E
D
C
T
L
1
L
E
D
C
T
L
2
G
N
D
M
+
5
V
1 2 3 4 5
1
2
3
4
5
R
E
M
I
N
1
L
E
D
C
T
L
1
L
E
D
C
T
L
2
G
N
D
M
+
5
V
SW7
POIN
GND
M+5V
M+7V
REMIN1
LEDCTL1
LEDCTL2
1
2
3
4 5 6 7 8
PV
A
+
1
2
A
.
G
N
D
A
+
6
A
+
6
A
.
G
N
D
A
.
G
N
D
N
C
N
C
1
2
3
4
1
2
3
4
1
2
3
4
TEMP-SENSOR1
SENB PWB
TEMP-SENSOR2
SEND PWB
TM
S
C
L
5
S
D
A
5
V
D
D
+
5
V
G
N
D
S
C
L
5
S
D
A
5
V
D
D
+
5
V
G
N
D
SCL5
SDA5
VDD+5V
GND
1
2
3
4
TR
SCL5
SDA5
VDD+5V
GND
A
U
-
L
G
N
D
A
U
-
R
G
N
D
M
U
T
E
S
C
L
7
S
D
A
7
AU : SHIELD-WIRE
1
2
3
4
5 6 7
1 2 3 4 5 6 7 8
PW
S
W
7
P
O
I
N
G
N
D
M
+
5
V
M
+
7
V
R
E
M
I
N
1
L
E
D
C
T
L
1
L
E
D
C
T
L
2
1 2 3 . . .
2
9
3
0
3
1
AD
PA
AU
1 2 3
F
A
N
-
C
T
L
G
N
D
F
-
A
L
M
1
1 2 3
F
A
N
-
C
T
L
G
N
D
F
-
A
L
M
2
1 2 3
F
A
N
-
C
T
L
G
N
D
F
-
A
L
M
3
FA FB FC
MAIN PWB
PCB-5040
PCB-5042H
PCB-5042C
PCB-5042D
PCB-5042A
PCB-5042B
PCB-5042E PCB-5042G
1 2 3
F
A
N
-
C
T
L
G
N
D
F
-
A
L
M
1
FAN-A
1 2 3
F
A
N
-
C
T
L
G
N
D
F
-
A
L
M
2
FAN-B
AU : SHIELD-WIRE
1,3,5,6,7pin:shield
TEMP-SENSOR3
SENC PWB
1
2
3
4
1
2
3
4
TS
SCL5
SDA5
VDD+5V
GND
SCL5
SDA5
VDD+5V
GND
PCB-5042F
D+3.3
D+3.3
D+3.3
D.GND
D.GND
D.GND
D+2.5
D+2.5
D+2.5
D.GND
D.GND
D.GND
M+7V
D.GND
POWER
D.GND
POMUTE
SW7
NC
A+12
A.GND
A+6
A+6
A.GND
A.GND
NC
NC
1 2 3
F
A
N
-
C
T
L
G
N
D
F
-
A
L
M
3
FAN-C
D
+
1
7
5
D
+
1
7
5
(
N
.
C
.
)
D
+
6
5
D
.
G
N
D
D
.
G
N
D
D
+
5
D
.
G
N
D
D
.
G
N
D
A
L
A
R
M
D
.
G
N
D
D
.
G
N
D
D
+
5
D
.
G
N
D
D
.
G
N
D
D
+
6
5
(
N
.
C
.
)
D
+
1
7
5
D
+
1
7
5
1 2
L N
AC INLET
10DKDG3S(Y1)
CCD PWB
PCB-5044
1
2
3
.
.
.
38
39
40
CCD
1 CC3
3 CC4
5 3.3V
7 D(9)
9 D(8)
11 D(7)
13 D(6)
15 D(5)
17 D(4)
19 D(3)
21 D(2)
23 D(1)
25 D(0)
27 GND
29 CLK
31 S_HSI
33 S_VSI
35 S_DEI
37 GND
39 VID_CCD
2 CC1
4 CC2
6 3.3V
8 A_D(9)
10 A_D(8)
12 A_D(7)
14 A_D(6)
16 A_D(5)
18 A_D(4)
20 A_D(3)
22 A_D(2)
24 A_D(1)
26 A_D(0)
28 GND
30 A_S_CLK
32 A_S_HSI
34 A_S_VSI
36 A_S_DEI
38 GND
40 6V
PX-61XM3A,PX-61XR3A only
1
2
3
.
.
.
38
39
40
PX-61XM3/61XR3 Series
13-1
CONNECTION DIAGRAMS
PX-42VM5/42VP5/42VR5/42XM3/42XR3/50XM4/50XR4/61XM3/61XR3 Series
No signal With signal
PN 1 D+3.3 0 3.3 3.3 0 0 0 - POWERMAIN
2 D+3.3 0 3.3 3.3 0 0 0 -
POWERMAIN
3 D+3.3 0 3.3 3.3 0 0 0 -
POWERMAIN
4 D.GND GND 0 0 0 0 0 0 - -
5 D.GND GND 0 0 0 0 0 0 - -
6 D.GND GND 0 0 0 0 0 0 - -
7 D+2.5 0 2.5 2.5 0 0 0 -
POWERMAIN
8 D+2.5 0 2.5 2.5 0 0 0 -
POWERMAIN
9 D+2.5 0 2.5 2.5 0 0 0 -
POWERMAIN
10 D.GND GND 0 0 0 0 0 0 - -
11 D.GND GND 0 0 0 0 0 0 - -
12 D.GND GND 0 0 0 0 0 0 - -
PM 1 M+7 6.8 6.8 6.8 6.8 6.8 6.8 - POWERMAIN
2 D.GND GND 0 0 0 0 0 0 - -
3 POWER Power control 0 4.9 4.9 0 0 0 - MAINPOWER
4 D.GND GND 0 0 0 0 0 0 - -
5 POMUTE Mute signal for AC power OFF 4.8 4.8 4.8 4.8 4.8 4.8 4.8- POWERMAIN
6 SW7 Power start control 0 6.8 6.8 6.8 6.8 0 - POWERMAIN
7 Non-connection terminal - - - - - - - -
PV 1 A+12 12V power supply for analog circuits 0 12 12 0 0 0 - POWERMAIN
2 A.GND GND 0 0 0 0 0 0 - -
3 A+6 6V power supply for analog circuits 0 6 6 0 0 0 - POWERMAIN
4 A+6 6V power supply for analog circuits 0 6 6 0 0 0 - POWERMAIN
5 A.GND GND 0 0 0 0 0 0 - -
6 A.GND GND 0 0 0 0 0 0 - -
7 NC Non-connection terminal - - - - - - - -
8 NC Non-connection terminal - - - - - - - -
AU 1 AU_L Audio signal L
CH
0 Selected input
signals are
output.
Selected input
signals are
output.
0 0 0 - MAINAUDIO
2 GND GND 0 0 0 0 0 0 - -
3 AU_R Audio signal R
CH
0 Selected input
signals are
output.
Selected input
signals are
output.
0 0 0 - MAINAUDIO
4 GND GND 0 0 0 0 0 0 - -
5 MUTE Mute signal of audio output 3.5 3.50 3.50 3.5 3.50 3.5 3.5- MAINAUDIO
6 SCL7 Clock line of the I2C bus 0 Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
0 0 0 - MAINAUDIO
7 SDA7 Data line of the I2C bus 0 Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
1 1 0 - MAINAUDIO
RS 1 M+5V 5V power supply for microcomputer 0 5 5 5 5 0 - MAINRS232C
2 TXD RS232 driver output 0 Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
received.
Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
received.
Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
received.
Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
received.
0
-
MAINRS232C
3 GND GND 0 0 0 0 0 0 - -
4 RXD RS232 receiver input 0 Clock signal
(3.3Vac) when
data are
received;
3.3Vdc when
no data are
received.
Clock signal
(3.3Vac) when
data are
received;
3.3Vdc when
no data are
received.
Clock signal
(3.3Vac) when
data are
received;
3.3Vdc when
no data are
received.
Clock signal
(3.3Vac) when
data are
received;
3.3Vdc when
no data are
received.
0 - RS232CMAIN
5 M+3.3V 3.3V power supply for microcomputer 0 3.3 3.3 3.3 3.3 0 - MAINRS232C
6 GND GND 0 0 0 0 0 0 - -
7 REMIN2/RXD
1
Data signal of
wired remote
control
42VM5
42VP5
42XM3
50XM4
61XM3
0 Clock signal
(3.3Vac) when
data are
received;
3.3Vdc when
no data are
received.
Clock signal
(3.3Vac) when
data are
received;
3.3Vdc when
no data are
received.
Clock signal
(3.3Vac) when
data are
received;
3.3Vdc when
no data are
received.
Clock signal
(3.3Vac) when
data are
received;
3.3Vdc when
no data are
received.
0 - RS232CMAIN
42VR5
42XR3
50XR4
61XR3
0 0 0 0 0 0 -
8 RESET SW NC - - - - - - - -
9 PLE_CTL PLE control 42VM5
42VP5
42XM3
50XM4
61XM3
0 3.3V duning
data
transmission
for Video
WOLL
0V when no
data are
transmitted
3.3V duning
data
transmission
for Video
WOLL
0V when no
data are
transmitted
3.3V duning
data
transmission
for Video
WOLL
0V when no
data are
transmitted
0 0 - MAINRS232C
42VR5
42XR3
50XR4
61XR3
0 0 0 0 0 0 -
10 TXD1 RS232 driver
output
42VM5
42VP5
42XM3
50XM4
61XM3
0 Clock signal
used during
data
transmission
(5Vac) 5Vdc
when no data
are
transmitted.
Clock signal
used during
data
transmission
(5Vac) 5Vdc
when no data
are
transmitted.
Clock signal
used during
data
transmission
(5Vac) 5Vdc
when no data
are
transmitted.
0 0 - MAINRS232C
2.5V power supply for digital circuits
2.5V power supply for digital circuits
7V power supply for microcomputer
Signal direction
Main power ON
(POWER button ON)
Pin No. Pin name Function Standby
Power
management
(Caution) The operating voltages specified below are used in common irrespective of the presence of signals. In this case, however, part of the operating voltages (red characters) may change according
to the signal conditions when the main power supply is turned on (POWER button ON).
Status of LED lighting: for lighting in green, for unlighting, and for lighting in red. Vol.1
3.3V power supply for digital circuits
3.3V power supply for digital circuits
3.3V power supply for digital circuits
AC power OFF
(Power cord
pulled out of
the wall outlet)
AC power ON
(Power cord
connected to
the wall outlet)
Basic operation (Numerical unit: Vdc; except for the case when units are individually indicated)
Name
CONNECTOR PIN EXPLANATION
14-1
No signal With signal
Signal direction
Main power ON
(POWER button ON)
Pin No. Pin name Function Standby
Power
management
Main power
OFF
AC power OFF
(Power cord
pulled out of
the wall outlet)
AC power ON
(Power cord
connected to
the wall outlet)
Basic operation (Numerical unit: Vdc; except for the case when units are individually indicated)
Name
42VR5
42XR3
50XR4
61XR3
0 0 0 0 0 0 -
11 232C_SHUT ON/OFF control for TXD0 driver 0 3.3 3.3 3.3 3.3 0 - MAINRS232C
12 REM Insertion
detection for
wired remote
control input
42VM5
42VP5
42XM3
50XM4
61XM3
0 3.3V when a
wired remote
control is
connected/
When not
connected.
3.3V when a
wired remote
control is
connected/
When not
connected.
3.3V when a
wired remote
control is
connected/
When not
connected.
3.3V when a
wired remote
control is
connected/
When not
connected.
0 - RS232CMAIN
42VR5
42XR3
50XR4
61XR3
- - - - - - - (NC for Model R)
TM 1 SCL5 Clock line of the I2C bus 0 Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
transmitted.
Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
transmitted.
0 0 0 - MAINSENB
2 GND GND 0 0 0 0 0 0 - -
3 VDD+3.3V 3.3V power supply for analog signals 0 3.3 3.3 0 0 0 - MAINSENB
4 SDA5 Data line of the I2C bus 0 During data
exchange:
Clock signal
(3.3Vac), Data
not
exchanged:
3.3Vdc
During data
exchange:
Clock signal
(3.3Vac), Data
not
exchanged:
3.3Vdc
0 0 0
-
MAINSENB
TR 1 SCL5 Clock line of the I2C bus 0 Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
transmitted.
Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
transmitted.
0 0 0 - SENBSEN
2 GND GND 0 0 0 0 0 0 - -
3 VDD+3.3V 3.3V power supply for analog signals 0 3.3 3.3 0 0 0 - SENBSEN
4 SDA5 Data line of the I2C bus 0 During data
exchange:
Clock signal
(3.3Vac), Data
not
exchanged:
3.3Vdc
During data
exchange:
Clock signal
(3.3Vac), Data
not
exchanged:
3.3Vdc
0 0 0
-
SENBSEND
TS 1 SCL5 Clock line of the I2C bus 0 Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
transmitted.
Clock signal
used during
data
transmission
(3.3Vac)
3.3Vdc when
no data are
transmitted.
0 0 0 - SENDSENC
2 GND GND 0 0 0 0 0 0 - -
3 VDD+3.3V 3.3V power supply for analog signals 0 3.3 3.3 0 0 0 - SENDSENC
4 SDA5 Data line of the I2C bus 0 During data
exchange:
Clock signal
(3.3Vac), Data
not
exchanged:
3.3Vdc
During data
exchange:
Clock signal
(3.3Vac), Data
not
exchanged:
3.3Vdc
0 0 0
-
SENDSENC
FA 1 FAN-CTL Voltage-
controllable
power supply
42VM5
42VP5
42VR5
- - - - - - - -
42XM3
42XR3
0 11.5Vdc
during high-
speed
revolution
(Fan mode H);
8.5Vdc during
medium speed
revolution
(Fan mode M);
6.5Vdc during
low-speed
revolution
(Fan mode L)
11.5Vdc
during high-
speed
revolution
(Fan mode H);
8.5Vdc during
medium speed
revolution
(Fan mode M);
6.5Vdc during
low-speed
revolution
(Fan mode L)
0 0 0 - MAINFAN
50XM4
50XR4
0 11.6Vdc
during high-
speed
revolution
(Fan mode H);
7.8Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
11.6Vdc
during high-
speed
revolution
(Fan mode H);
7.8Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
0 0 0 -
61XM3
61XR3
0 9.3Vdc during
high-speed
revolution
(Fan mode H);
7.6Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
9.3Vdc during
high-speed
revolution
(Fan mode H);
7.6Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
0 0 0 -
2 GND GND 0 0 0 0 0 0 - -
3 ALARM 42VM5
42VP5
42VR5
- - - - - - - - FAN lock detect
signal output
14-2
No signal With signal
Signal direction
Main power ON
(POWER button ON)
Pin No. Pin name Function Standby
Power
management
Main power
OFF
AC power OFF
(Power cord
pulled out of
the wall outlet)
AC power ON
(Power cord
connected to
the wall outlet)
Basic operation (Numerical unit: Vdc; except for the case when units are individually indicated)
Name
42XM3
42XR3
50XM4
50XR4
61XM3
61XR3
0 0V during
normal fan
operation;3.3V
dc while the
fan is stopped.
0V during
normal fan
operation;3.3V
dc while the
fan is stopped.
0 0 0 - FANMAIN
FB 1 FAN-CTL Voltage-
controllable
power supply
42VM5
42VP5
42VR5
- - - - - - - -
42XM3
42XR3
0 11.5Vdc
during high-
speed
revolution
(Fan mode H);
8.5Vdc during
medium speed
revolution
(Fan mode M);
6.5Vdc during
low-speed
revolution
(Fan mode L)
11.5Vdc
during high-
speed
revolution
(Fan mode H);
8.5Vdc during
medium speed
revolution
(Fan mode M);
6.5Vdc during
low-speed
revolution
(Fan mode L)
0 0 0 - MAINFAN
50XM4
50XR4
0 11.6Vdc
during high-
speed
revolution
(Fan mode H);
7.8Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
11.6Vdc
during high-
speed
revolution
(Fan mode H);
7.8Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
0 0 0 -
61XM3
61XR3
0 9.3Vdc during
high-speed
revolution
(Fan mode H);
7.6Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
9.3Vdc during
high-speed
revolution
(Fan mode H);
7.6Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
0 0 0 -
2 GND GND 0 0 0 0 0 0 - -
3 ALARM 42VM5
42VP5
42VR5
- - - - - - - -
42XM3
42XR3
50XM4
50XR4
61XM3
61XR3
0 0V during
normal fan
operation;3.3V
dc while the
fan is stopped.
0V during
normal fan
operation;3.3V
dc while the
fan is stopped.
0 0 0 - FANMAIN
FC 1 FAN-CTL Voltage-
controllable
power supply
42VM5
42VP5
42VR5
42XM3
42XR3
50XM4
50XR4
- - - - - - - -
61XM3
61XR3
0 9.3Vdc during
high-speed
revolution
(Fan mode H);
7.6Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
9.3Vdc during
high-speed
revolution
(Fan mode H);
7.6Vdc during
medium speed
revolution
(Fan mode M);
5.3Vdc during
low-speed
revolution
(Fan mode L)
0 0 0 - FANMAIN
2 GND GND 0 0 0 0 0 0 - -
3 ALARM 42VM5
42VP5
42VR5
42XM3
42XR3
50XM4
50XR4
- - - - - - - -
61XM3
61XR3
0 0V during
normal fan
operation;3.3V
dc while the
fan is stopped.
0V during
normal fan
operation;3.3V
dc while the
fan is stopped.
0 0 0 - FANMAIN
AD 1 GND GND 0 0 0 0 0 0 - -
2 GND GND 0 0 0 0 0 0 - -
3 ALARM Module alarm signal 0 5Vdc during
normal PDP
operation; 0V
when the PDP
is out of order.
5Vdc during
normal PDP
operation; 0V
when the PDP
is out of order.
0 0 0 - PDPMAIN
4 GND GND 0 0 0 0 0 0 - -
FAN lock detect
signal output
FAN lock detect
signal output
14-3
No signal With signal
Signal direction
Main power ON
(POWER button ON)
Pin No. Pin name Function Standby
Power
management
Main power
OFF
AC power OFF
(Power cord
pulled out of
the wall outlet)
AC power ON
(Power cord
connected to
the wall outlet)
Basic operation (Numerical unit: Vdc; except for the case when units are individually indicated)
Name
5 PS+ PSS input PS+ 0 PSS LVDS
serial differen
tial PS+ input
0Vac; Bias
1.1Vdc
PSS LVDS
serial differen
tial PS+ input
0.3Vac; Bias
1.25Vdc
0 0 0 - PDPMAIN
6 PS- PSS input PS- 0 PSS LVDS
serial differen
tial PS+ input
0Vac; Bias
1.4Vdc
PSS LVDS
serial differen
tial PS+ input
0.3Vac; Bias
1.25Vdc
0 0 0 - PDPMAIN
7 MSEL 42V5 compatible interface OFF 0 0 0 0 0 0 - -
8 GND GND 0 0 0 0 0 0 - -
9 RH+ OSD system output H+ 0 OSD LVDS
serial
differential H+
output 0Vac;
Bias 1.1Vdc
OSD LVDS
serial
differential H+
output 0Vac;
Bias 1.1Vdc
0 0 0 - MAINPDP
10 RH- OSD system output H 0 OSD LVDS
serial
differential H-
output 0Vac;
Bias 1.4Vdc
OSD LVDS
serial
differential H-
output 0Vac;
Bias 1.4Vdc
0 0 0 - MAINPDP
11 RG+ OSD system output G+ 0 OSD LVDS
serial
differential G+
output 0.3Vac;
Bias 1.25Vdc
OSD LVDS
serial
differential G+
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
12 RG- OSD system output G- 0 OSD LVDS
serial
differential G-
output 0.3Vac;
Bias 1.25Vdc
OSD LVDS
serial
differential G-
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
13 RF+ Mode system output F+ 0 Video mode
LVDS serial
differential F+
output 0.3Vac;
Bias 1.25Vdc
Video mode
LVDS serial
differential F+
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
14 RF- Mode system output F- 0 Video mode
LVDS serial
differential F-
output 0.3Vac;
Bias 1.25Vdc
Video mode
LVDS serial
differential F-
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
15 GND GND 0 0 0 0 0 0 - -
16 RE+ Video system output E+ 0 Video mode
LVDS serial
differential E+
output 0Vac;
Bias 1.1Vdc
Video mode
LVDS serial
differential E+
output 0Vac;
Bias 1.1Vdc
* Only for the
PX-42VP4
Series, 0.3Vac
and bias 1.25
Vdc in theater
mode when
60Hz motion
pictures are
displayed.
0 0 0 - MAINPDP
17 RE- Video system output E- 0 Video mode
LVDS serial
differential E-
output 0Vac;
Bias 1.4Vdc
Video mode
LVDS serial
differential E-
output 0.3Vac;
Bias 1.25Vdc
* Only for the
PX-42VP4
Series, 0.3Vac
and bias 1.25
Vdc in theater
mode when
60Hz motion
pictures are
displayed.
0 0 0 - MAINPDP
18 RD+ Video system output D+ 0 Video mode
LVDS serial
differential D+
output 0Vac;
Bias 1.1Vdc
Video mode
LVDS serial
differential D+
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
19 RD- Video system output D 0 Video mode
LVDS serial
differential D-
output 0Vac;
Bias 1.4Vdc
Video mode
LVDS serial
differential D-
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
14-4
No signal With signal
Signal direction
Main power ON
(POWER button ON)
Pin No. Pin name Function Standby
Power
management
Main power
OFF
AC power OFF
(Power cord
pulled out of
the wall outlet)
AC power ON
(Power cord
connected to
the wall outlet)
Basic operation (Numerical unit: Vdc; except for the case when units are individually indicated)
Name
20 RCLK+ Video system output clock+ 0 Video data
clock LVDS
serial
differential
clock+ output
0.3Vac; Bias
1.25Vdc
Video data
clock LVDS
serial
differential
clock+ output
0.3Vac; Bias
1.25Vdc
0 0 0 - MAINPDP
21 RCLK- Video system output clock 0 Video data
clock LVDS
serial
differential
clock- output
0.3Vac; Bias
1.25Vdc
Video data
clock LVDS
serial
differential
clock- output
0.3Vac; Bias
1.25Vdc
0 0 0 - MAINPDP
22 GND GND 0 0 0 0 0 0 - -
23 RC+ Video system output C+ 0 Video data
LVDS serial
differential C+
output 0.3Vac;
Bias 1.25Vdc
Video data
LVDS serial
differential C+
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
24 RC- Video system output C 0 Video data
LVDS serial
differential C-
output 0.3Vac;
Bias 1.25Vdc
Video data
LVDS serial
differential C-
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
25 RB+ Video system output B+ 0 Video data
LVDS serial
differential B+
output 0Vac;
Bias 1.1Vdc
Video data
LVDS serial
differential B+
output 0Vac;
Bias 1.1Vdc
0 0 0 - MAINPDP
26 RB- Video system output B 0 Video data
LVDS serial
differential B-
output 0Vac;
Bias 1.4Vdc
Video data
LVDS serial
differential B-
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
27 RA+ Video system output A+ 0 Video data
LVDS serial
differential A+
output 0Vac;
Bias 1.1Vdc
Video data
LVDS serial
differential A+
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
28 RA- Video system output A 0 Video data
LVDS serial
differential A-
output 0Vac;
Bias 1.4Vdc
Video data
LVDS serial
differential A-
output 0.3Vac;
Bias 1.25Vdc
0 0 0 - MAINPDP
29 GND GND 0 0 0 0 0 0 - -
30 GND GND 0 0 0 0 0 0 - -
31 GND GND 0 0 0 0 0 0 - -
LD 1 REMIN1 Infrared remote control data 0 Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
0
-
LEDPWR
2 LEDCTL1 Standby red LED control 0 0 0 3.3 3.3 0 - PWRLED
3 LEDCTL2 POWER ON green LED control 0 3.3 3.3 0 0 0 - PWRLED
4 GND GND 0 0 0 0 0 0 - -
5 M+5V 5V power supply for microcomputer 0 5 5 5 5 0 - PWRLED
PW 1 SW7 Power start control 0 6.8 6.8 6.8 6.8 0 - PWMAIN
2 POIN Power start detection 0 3.3 3.3 3.3 3.3 0 - PWMAIN
3 GND GND 0 0 0 0 0 0 - -
4 M+5V 5V power supply for microcomputer 0 5 5 5 5 0 - MAINPW
5 M+7V 7V power supply for microcomputer 0 6.8 6.8 6.8 6.8 6.8 - MAINPW
6 REMIN1 Infrared remote control data 0 Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
Clock signal
(5Vac) when
data are
received; 5Vdc
when no data
are received.
0 - PWMAIN
7 LEDCTL1 Standby red LED control 0 0 0 3.3 3.3 0 - MAINPW
8 LEDCTL2 POWER ON green LED control 0 3.3 3.3 0 0 0 - MAINPW
SW 1 CTL1 Key input detection 0 0.7~2.8Vdc
when key
inputs are
entered;
3.3Vdc when
no key inputs
are entered.
0.7~2.8Vdc
when key
inputs are
entered;
3.3Vdc when
no key inputs
are entered.
0.7~2.8Vdc
when key
inputs are
entered;
3.3Vdc when
no key inputs
are entered.
0.7~2.8Vdc
when key
inputs are
entered;
3.3Vdc when
no key inputs
are entered.
0 - SWMAIN
2 CTL2 Key input detection 0 0.7~2.8Vdc
when key
inputs are
entered;
3.3Vdc when
no key inputs
are entered.
0.7~2.8Vdc
when key
inputs are
entered;
3.3Vdc when
no key inputs
are entered.
0.7~2.8Vdc
when key
inputs are
entered;
3.3Vdc when
no key inputs
are entered.
0.7~2.8Vdc
when key
inputs are
entered;
3.3Vdc when
no key inputs
are entered.
0 - SWMAIN
3 GND GND 0 0 0 0 0 0 - -
PA 1 S+12 +12V power supply for audio circuits 0 12 12 0 0 0 - POWERAUDIO
2 S+12 +12V power supply for audio circuits 0 12 12 0 0 0 - POWERAUDIO
3 S+12 +12V power supply for audio circuits 0 12 12 0 0 0 - POWERAUDIO
4 GND GND 0 0 0 0 0 0 - -
14-5
No signal With signal
Signal direction
Main power ON
(POWER button ON)
Pin No. Pin name Function Standby
Power
management
Main power
OFF
AC power OFF
(Power cord
pulled out of
the wall outlet)
AC power ON
(Power cord
connected to
the wall outlet)
Basic operation (Numerical unit: Vdc; except for the case when units are individually indicated)
Name
5 GND GND 0 0 0 0 0 0 - -
6 GND GND 0 0 0 0 0 0 - -
PD 1 ALARM PDP alarm signal 0 5Vdc when the
PDP is normal;
0V when it is
abnormal.
5Vdc when the
PDP is normal;
0V when it is
abnormal.
0 0 0 - PDPPOWER
2 D.GND GND 0 0 0 0 0 0 - -
3 D.GND GND 0 0 0 0 0 0 - -
4 D.GND GND 0 0 0 0 0 0 - -
5 D.GND GND 0 0 0 0 0 0 - -
6 D+60 Vd power supply
for PDP
0 60Vdc
(changeable
according to
the PDP)
60Vdc
(changeable
according to
the PDP)
0 0 0 - PDWERPDP
7 D+60 digital circuits 0 60Vdc
(changeable
according to
the PDP)
60Vdc
(changeable
according to
the PDP)
0 0 0 - PDWERPDP
8 NC digital circuits - - - - - - - -
9 D+170 Vs power supply
for PDP high-
voltage circuits
0 170Vdc
(changeable
according to
the PDP)
170Vdc
(changeable
according to
the PDP)
0 0 0
-
PDWERPDP
10 D+170 Vs power supply
for PDP high-
voltage circuits
0 170Vdc
(changeable
according to
the PDP)
170Vdc
(changeable
according to
the PDP)
0 0 0 - PDWERPDP
1 ALARM PDP alarm signal 0 5Vdc when the
PDP is normal;
0V when it is
abnormal.
5Vdc when the
PDP is normal;
0V when it is
abnormal.
0 0 0 - PDPPOWER
2 D.GND GND 0 0 0 0 0 0 - -
3 D.GND GND 0 0 0 0 0 0 - -
4 D+5 5V power supply
for digital circuits
0 5.15 5.15 0 0 0
-
POWERPDP
5 D.GND GND 0 0 0 0 0 0 - -
6 D.GND GND 0 0 0 0 0 0 - -
7 D+65 Vd power supply
for PDP
0 65Vdc
(changeable
according to
the PDP)
65Vdc
(changeable
according to
the PDP)
0 0 0 - POWERPDP
8 NC digital circuits - - - - - - - -
9 D+175 Vs power supply
for PDP high-
voltage circuits
0 175Vdc
(changeable
according to
the PDP)
175Vdc
(changeable
according to
the PDP)
0 0 0
-
POWERPDP
10 D+175 Vs power supply
for PDP high-
voltage circuits
0 175Vdc
(changeable
according to
the PDP)
175Vdc
(changeable
according to
the PDP)
0 0 0 - POWERPDP
PH 1 D+5 5V power supply
for digital circuits
0 5.15 5.15 0 0 0
-
PDWERPDP
2 D+5 5V power supply
for digital circuits
0 5.15 5.15 0 0 0
-
PDWERPDP
3 D.GND GND 0 0 0 0 0 0 - -
4 D.GND GND 0 0 0 0 0 0
-
-
1 D+175 Vs power supply
for PDP high-
voltage circuits
0 175Vdc
(changeable
according to
the PDP)
175Vdc
(changeable
according to
the PDP)
0 0 0
-
POWERPDP
2 D+175 Vs power supply
for PDP high-
voltage circuits
0 175Vdc
(changeable
according to
the PDP)
175Vdc
(changeable
according to
the PDP)
0 0 0
-
POWERPDP
3 NC Non-connection - - - - - - - -
4 D+65 Vd power supply
for PDP
0 65Vdc
(changeable
according to
the PDP)
65Vdc
(changeable
according to
the PDP)
0 0 0
-
POWERPDP
5 D.GND digital circuits 0 0 0 0 0 0 - -
6 D.GND GND 0 0 0 0 0 0 - -
7 D+5 5V power supply
for digital circuits
0 5.15 5.15 0 0 0
-
POWERPDP
8 D.GND GND 0 0 0 0 0 0 - -
9 D.GND GND 0 0 0 0 0 0 - -
61XM3
61XR3
42VM5
42VP5
42VR5
42XM3
42XR3
50XM4
50XR4
61XM3
61XR3
42VM5
42VP5
42VR5
42XM3
42XR3
50XM4
50XR4
14-6
Video chroma
Decoder
Video SW
Out1
Video/sync
SW
Out2
LPF1
LPF2
A/D1
A/D2
Digital signal
Processing block
I-P converter
Scaling
correction
Double pic processing
TMDS
Receiver
CPU
LVDS
Transmitter
To Module
Analog signal line
Digital signal line
Control signal line
VIDEO1
(BNC)
VIDEO2
(RCA)
VIDEO3
(S)
DVD/HD1
(3RCA)
RGB2/
DVD/HD2
(5BNC)
RGB1
(D-Sub)
RGB3
(DVI)
Video SW
(for Loop)
Video SW
(for Loop)
:
:
:
PX-50XM4/61XM3 Series
15-1
BLOCK DIAGRAM
Video chroma
Decoder
Video SW
Out1
Video/sync
SW
Out2
LPF1
LPF2
A/D1
A/D2
Digital signal
Processing block
I-P converter
Scaling
correction
Double pic processing
TMDS
Receiver
CPU
LVDS
Transmitter
To Module
Analog signal line
Digital signal line
Control signal line
VIDEO1
(BNC)
VIDEO2
(RCA)
VIDEO3
(S)
DVD/HD1
(3RCA)
RGB2/
DVD/HD2
(5BNC)
RGB1
(D-Sub)
RGB3
(DVI)
:
:
:
PX-50XR4/61XR3 Series
15-2
BLOCK DIAGRAM