Finite Element Analysis-A Biomechanical Tool in Orthodontics
Finite Element Analysis-A Biomechanical Tool in Orthodontics
Finite Element Analysis-A Biomechanical Tool in Orthodontics
Review Article
Finite element analysis-A biomechanical tool in orthodontics
Deepak Singh 1, Kaleem Fatima1 , Anshika Gandhi 1 *, Tulika Tripathi1 , Priyank Rai1
1 Dept. of Orthodontics, Maulana Azad Institute of Dental Sciences, New Delhi, India
Article history: In orthodontic research, the finite element method (FEM) has been widely used as an engineering resource
Received 11-02-2024 for calculating the stress and deformation of complex structures. Applying the FEM can predict the graphic
Accepted 22-03-2024 representation of these tissue responses through the observation of areas of stress created by applied
Available online 04-04-2024 orthodontic mechanics. This method has the advantage of being non-invasive, accurate, and providing
quantitative and detailed data on the physiological reactions possible to occur in tissues. The purpose of
this article is to review and discuss the steps involved in applying the concept of finite elements and how
Keywords: they can be used in orthodontics. The stress distribution at the interface between the alveolar bone and
Digital Orthodontics the periodontal ligament, as well as the shifting trend in different tooth movement types while employing
computer software
different kinds of orthodontic devices, may both be assessed using FEM. For this reason, expertise with
orthodontic force
certain software is required. Despite the drawbacks of other experimental techniques, FEM is a crucial
bone remodelling technique for addressing inquiries regarding tooth movement.
This is an Open Access (OA) journal, and articles are distributed under the terms of the Creative Commons
AttribFution-NonCommercial-ShareAlike 4.0 License, which allows others to remix, tweak, and build upon
the work non-commercially, as long as appropriate credit is given and the new creations are licensed under
the identical terms.
For reprints contact: reprint@ipinnovative.com
https://doi.org/10.18231/j.ijodr.2024.003
2581-9356/© 2024 Author(s), Published by Innovative Publication. 11
Singh et al. / IP Indian Journal of Orthodontics and Dentofacial Research 2024;10(1):11–15
12
Singh et al. / IP Indian Journal of Orthodontics and Dentofacial Research 2024;10(1):11–15
13
Singh et al. / IP Indian Journal of Orthodontics and Dentofacial Research 2024;10(1):11–15
the sphenoid and zygomatic bones as well as other related degree twist angle, and clinicians should stay within these
structures, not just the intermaxillary suture. 16 torque limitations to prevent plastic deformation that could
Using a FEM model, Chaturvedi et al. assessed the result in incorrect tooth positioning. 24
impact of orthodontic retraction force on thick and thin A Finite Element (FE) model for clear thermoplastic
gingival biotypes of anterior teeth with grade I and teeth aligners was successfully designed and validated by
II gingival recession. They discovered that orthodontic Ye et al. As a result, we can accurately capitalise on
treatment significantly altered the gingival tissue and helped the model to anticipate the stresses and moments that the
to correct periodontal defects; however, bone density was aligners will apply to teeth, enhancing our knowledge of the
found to be a significant factor in improving gingival biomechanics of these devices and the movement of teeth
recession. 17,18 they cause. 25
Because PDL is crucial for tooth movement, there is
a clear correlation between PDL stress and orthodontic 9. Limitations of Finite Element Analysis
tooth movement. Using the three-dimensional finite element
method, Tanne K et al. examined the stress levels caused by 1. Like every theoretical model of a biological system,
orthodontic forces in the periodontal tissue. They discovered this one has certain limitations such as mistakes
that, depending on the tooth’s centre of rotation, the pattern made in the modelling, material property assignment,
and amount of stresses in the periodontium caused by a boundary condition application, or even the application
given force magnitude varied significantly. 19 of inaccurate forces to an incorrect formulation may
Aesthetics is a primary consideration in orthognathic lead to improper results.
surgery because individuals are extremely concerned about 2. This is a complex analysis that depends on computers
their post-operative facial morphology. Virtual orthognathic and programmes, much care must be given both during
surgery and the development of facial 3D simulation models the modelling phase and in the steps that precede the
have opened up new avenues of communication between the final run of the results to ensure that the right input data
surgeon and the patient. In their work, Obaidellah et al. use is sent in for the desired results.
FEM on three-dimensional face models to present a surgical 3. It is also difficult, if not impossible, to recreate
planning, simulation, and prediction of facial soft tissue biological tissue exactly like it exists in mechanical
appearance with relation to mandibular advancement using models.
the osteotomy planning system. Using a 3D FE model of 4. The expense of the FEM study is another main
the soft tissues of the face, Chabanas et al. predicted the soft constraint. The fact that the FEM is mostly utilised for
tissue deformations in the face that arise from repositioning research and does not now have an appropriate cost in
bones during maxillofacial surgery. 20,21 several countries should be emphasised.
In order to assess continuous and simultaneous
alterations in orthodontic mini-implant diameter and length 10. Conclusion
and to determine their ideal ranges in the maxillary posterior The Finite Element Method (FEM) is a valuable tool in
region, Jiang et al. performed a finite element analysis. orthodontic research because it highlights a number of
They discovered that the best biomechanical option was important points, including the following: the direction of
a diameter larger than 1.5 mm combined with the longest tooth displacement; the optimal location of orthodontic
length within the safety limit. 22 appliances during a particular mechanics; the areas most
sing a three-dimensional finite element computer model, likely to exhibit root resorption; and the distribution
Shyagali et al. evaluated the variations in stresses produced of stresses on the archwires. Because FEM is precise,
in the bracket-cement-tooth system by means of a peel noninvasive, controls the research variables, and yields
load in single and double-mesh bracket bases. The findings quantitative data about the internal structures of the
indicate that altering the bracket’s shape can enhance nasomaxillary and mandibular complex, including the
bonding capabilities and lessen enamel damage as it periodontal ligament, it can overcome the shortcomings
debonds. These details could help develop new, creative of other experimental methods. The method, however,
bracket designs intended for therapeutic application. 23 uses extremely specific software, therefore it demands
In order to assess the torque-induced bracket slot understanding of computer engineering.
deformation in the widely used 0.018-inch (") and
0.022" conventional Stainless Steel (SS) brackets with 11. Source of Funding
clinically relevant archwires during various angles of twist,
Harikrishnan et al. conducted an in-silico study. They found None.
that the slot deformation in both the 0.018" and 0.022"
brackets increased with the angle of twist. Therefore, it can 12. Conflict of Interest
be said that bracket slots only bend elastically up to a 30- None.
14
Singh et al. / IP Indian Journal of Orthodontics and Dentofacial Research 2024;10(1):11–15
15