OptiX RTN 600 Configuration-Using T2000 and T2000 Web LCT

Security Level: internal use
OptiX RTN 600 Configuration

—Using the T2000 and T2000 Web LCT
www.huawei.com
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Foreword
z Huawei provides NE-level, subnet-level and network-level management

systems for the RTN 600 series products.
z This course describes the NE-level management system OptiX iManager
T2000 Web LCT and the subnet-level management system OptiX iManager
T2000.

Reference
z Digital Microwave Communication principles

z OptiX iManager T2000 Management System
Solution V2.31
z OptiX iManager T2000 Web LCT Installation
Guide and User Guide

Objectives
Upon completion of this course, you will be able to:
¾ Describe the functions of the T2000 and the T2000 Web LCT.
¾ Install the T2000 Web LCT.
¾ Configure services and protection by using the T2000 and the T2000 Web
LCT.

Contents
1. Introduction to Networks Management

Systems
2. Introduction to T2000 Web LCT
3. Introduction to the T2000

Comprehensive Management System
Solution
OSS or integrated
NMS Service
Integrated NMS & OSS CORBA
management
layer
CORBA CORBA
iManager T2100
Network
iManager T2100
MML MML MML
management
layer
iManager T2000 iManager T2000 iManager T2000
iManager T2000 NE
LCT
Qx Qx Qx Qx management
layer
NE layer

Introduction to Management Systems
The orientation of each management system is as follows:
z iManager T2000 LCT
The T2000 local craft terminal (LCT) realizes the local maintenance and equipment turn-up of Huawei
OptiX products.
z iManager T2000
The iManager T2000 (T2000 for short) is a subnet management system (SNMS) for transport networks.
The T2000 manages the full series of Huawei OptiX products. The T2000 supports all functions of the
NE layer and some of the network layer management functions.
z iManager T2100
The iManager T2100 (T2100 for short) is a network-level management system that uniformly manages
the full series of Huawei OptiX products. It manages large-scale optical transport networks in a uniform
manner.
z iManager MDS
The iManager MDS (MDS for short) is a business-level management system for transport networks. It
assists users to plan and simulate an optical transport network.

Introduction to Management Systems
z Platforms where the management systems are running

Contents
1. Introduction to Management Systems

2. Introduction to the T2000 Web LCT
3. Introduction to the T2000

Contents
z Introduction to the T2000 Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations

T2000 Web LCT – Main Characteristics
The characteristics of the T2000 Web LCT are as follows:
Web-based solution
Per-NE configuration and maintenance
Access to a local NE through a LAN/RS 232
Access to a remote NE through DCC
Management of NEs of various types
Concurrent login to a maximum of 32 NEs
Integration with the T2000, T2100 or third-party
management system

T2000 Web LCT – Function
The T2000 Web LCT provides the following NE-layer management functions:
Service configuration (including PDH and SDH microwave services)
Protection configuration (intermediate frequency protection, SNCP, LMSP)
Setting and query of the intermediate frequency attributes
Setting and query of the radio frequency attributes
Data services (the 10M/100M fast Ethernet transparent transmission board EFT4 is
supported)
Setting and viewing of alarms and performance data
Communication and security

Contents
Introduction to the T2000 Web LCT


T2000 Web LCT – Application Scenario
Stand-alone
The equipment maintenance personnel installs the T2000 Web LCT
on a PC.
The equipment maintenance personnel manages local or remote
NEs by using the T2000 Web LCT.

T2000 Web LCT – Application Scenario
Integrated
The personnel at the network operations center install the EMS or NMS on a PC.
Install the T2000 Web LCT as a part of the EMS. The NMS need not be installed.
The personnel at the network operations center starts the T2000 Web LCT by using the EMS
or NMS client.
NMS
DCN
EMS
EMS
NE network NE network

Contents


T2000 Web LCT – Installation Guide
Pre-installation
z Configuration requirements
The T2000 Web LCT runs on the Windows operating system.
z Hardware requirements
CPU: Pentium III 700 MHz or higher
RAM: 256 MB (recommended 512 MB or higher)
Monitor: 1024 x 768 resolution
Serial port: RS 232
Ethernet port: 10M/100M

Pre-installation (continued)
z Software requirements
Windows XP Professional SP2/Windows 2003
Server Standard SP1
Internet Explorer 6.0 or better
Tomcat 5.0
JDK1.4.2
Servlet 2.3

z Prerequisite: Windows XP Professional SP2 or Windows 2003 Server standard SP1 must be installed.
z Procedure
Step 1 Uncompress the installation package or Insert the installation CD-ROM, and run the
setup.exe file. Click Next.

Step 2 Select I accept the terms of the license agreement and click Next.

Step 3 Enter your user name, company name, and serial number Click Next.

Step 4 Click Next.

Step 5 Click Install and the Setup Status dialog box is displayed. After the T2000 Web LCT is installed,
the Installation Complete dialog box is displayed.

Step 6 Click Finish.

Checking the Installation
After you install the T2000 Web LCT, you need to check the correctness of installation.
Check directories and files as follows:
z The T2000 Web LCT installation directory.
By default is C:\Web_LCT.
z The installation directory of the jre software.
By default is C:\Web_LCT\jre.
z The installation directory of the Tomcat software.
By default is C:\Web_LCT\Tomcat .
z Check the shortcut icon on desktop. The iManager T2000 Web LCT group is created in
the Windows Program bar.

Contents
z Introduction to the T2000 Web
LCT

T2000 Web LCT – Connecting to NEs
z To use the T2000 Web LCT to configure and manage NEs, you need to connect the
T2000 Web LCT to NEs with an Ethernet cable or a serial port.
z Procedure
By using a network cable
1. Connect a network cable to the computer where the T2000 Web LCT resides.
2. Route the network cable to the equipment side and connect the RJ-45
connector of the network cable to the network management interface on the
front panel of the equipment.

T2000 Web LCT – Connecting to NEs
z Procedure (continued)
By using DCN
1. Use a network cable to connect the computer where the T2000 Web LCT resides
to the DCN.
2. Connect one end of another network cable to the network management interface
on the front panel of the equipment. Connect another end to the DCN.
By using an RS 232 serial port cable
1. Connect the serial port cable to the computer where the T2000 Web LCT resides.
2. Route the serial port cable to the equipment side. Connect the RS 232 connector
of the serial port cable to the RS 232 interface on the front panel of the
equipment.

Contents


Contents
z Configuration Operations
2.5.1 Logging In to an NE
2.5.2 Modifying the NE ID
2.5.3 Configuring IF Protection
2.5.4 Setting IF Attributes
2.5.5 Setting RF Attributes
2.5.7 Configuring Service
2.5.7 Configuring SNCP Service
2.5.8 Converting service
2.5.9 Alarm
2.5.10 Performance
2.5.11 Communications and Security

Web LCT Configuration – Logging In to an NE
Step1 Double-click the T2000 Web LCT shortcut icon on the desktop to launch the T2000 Web LCT.
Step2 The User Login screen is displayed. Enter the user name and password. Click Login.

Step3 Create an NE in one of the following two ways.
1. Click NE Search and specify the search criteria. Select the NE to be added to create a new NE.

2. Create an NE directly. Click the “Add NE” and Enter the information of the NE and create
the NE.

z Step 4: In the NE List, select the target NE and click NE Login.Then, the IE displays the NE Login
dialog box.
• Step 5:Enter the User Name and the Password. Then, click OK.

Web LCT Configuration – Modifying the NE ID
Step 1 In the NE Explorer, choose Configuration > NE Attribute from the Function Tree.
Click Modify NE ID.

Step 2 Enter a new ID and click OK.

Step 3 In the NE list, delete the original NE. Create a new NE with the new ID.

Web LCT Configuration – Configuring IF Protection
z The supported IF protection is 1+1 HSB, 1+1 SD, and 1+1 FD.
Create IF protection
Step 1 In the NE Explorer, choose Configuration > IF 1+1 Protection from

the Function Tree.

Step 2 Click New and enter the information of the IF protection. Click OK or Apply.

Perform IF protection external switching. The priorities of external switching

commands are as follows: clear, lockout, force, and manual.

Web LCT Configuration – Setting IF Attributes
z You can set the following IF attributes by using the T2000 Web LCT: working mode,
link ID, IF port loopback, 2 Mbit/s wayside service, and ATPC-related information.
z In the NE Explorer, select an IF board and choose IF Interface from the Function
Tree.

Web LCT Configuration – Setting IF Attributes
• You can enable automatic transmit power control (ATPC), and adjust the
threshold and the ATPC adjustment.

Web LCT Configuration – Setting RF Attributes
z By using the T2000 Web LCT, you can query and configure the following RF
attributes: transmit frequency, T/R spacing, transmitted power, ODU manufacturer
information, RF loopback status, and ODU status.
z Frequency attributes

Power attributes

ODU manufacturer information

In the Advanced Attributes tab, you set RF loopback and ODU status.

Web LCT Configuration – Configuring a Service
¾ This operation is applicable to VC4, VC3, and VC12 services.

¾ Procedure
Step 1 In the NE Explorer, Configuration -> Cross-Connection Configuration
from the Function Tree.


Step 2 Click New, enter the information of a service and click OK or Apply.

Web LCT Configuration – Configuring an SNCP Service
z This operation is applicable to VC12, VC3, and VC4 SNCP services.
z Procedure
Step 1 In the Cross-Connection Configuration window, click Create SNCP. Enter the information
of an SNCP service.

Web LCT Configuration – Configuring an SNCP Service
Step 2 After you create an SNCP service, the window is divided into two panes.
The upper pane displays the working service and the lower pane displays the
protection service. You can perform external switching for the working and
protection services.

Web LCT Configuration – Converting a Service
z The T2000 Web LCT supports the conversion between a normal service and an SNCP
service.
To convert a normal service to an SNCP service, select a normal service, right-click and
choose Convert to SNCP from the shortcut menu. Enter the source of the service in the
protection channel and click OK.

z You can convert the working or protection channel of an SNCP service to a normal service.
To convert a working channel, right-click the service in the working channel and choose SNCP
Working Service Change to Normal Service from the shortcut menu.

To convert a protection channel, right-click the service in the protection channel and choose
SNCP Protection Service Change to Normal Service from the shortcut menu.

Web LCT Configuration – Alarm
z By using the T2000 Web LCT, you can view the current and history alarms, the
reporting status of alarms for an NE and boards, and abnormal events.

Web LCT Configuration – Performance
The T2000 Web LCT supports 15-minute and 24-hour performance monitoring
intervals.

Web LCT Configuration – Performance
z You can view the current and history performance data, UAT events, threshold
crossings, and performance monitoring status. You can set the performance
threshold and reset a board registry.

Web LCT Configuration – Communications
z The RTN 600 uses the OSP NE platform.

z You can set multiple protocol stacks, including the OSI, IP, and HWECC.

Web LCT Configuration – Communications
z For DCC management, an IF board supports the configuration of different DCC rates
in different working modes.
When the working mode is PDH, the configuration of one-byte DCC (D1-D1) rate is
supported.
When the working mode is SDH, the configuration of D1-D3, D4-D12, D1-D12, and D1-
D1 is supported.

Contents
1. Introduction to Management Systems

2. Introduction to T2000 Web LCT
3. Introduction to T2000

Contents
z Introduction to T2000

T2000 Main Characteristics
z The T2000 consists of server and client.
z The server is developed based on C++ and the client is based on
Java.
z The T2000 manages a maximum of 1000 equivalent NEs and
supports concurrent operations of 32 clients.
T2000 server
T2000 client T2000 client

T2000 Main Characteristics
z Modular architecture
z Open and integrated
z High efficiency and reliability

Contents

T2000 Application Scenario
z Subnet management system (SNMS)

z Applicable to small and medium network management
z Provides power NE management functions
z Uniformly manage the RTN/SDH/ASON/MSTP/WDM equipment
z Provides the standard northbound interfaces and supports OSS
integration
iManager T2000

Contents

Contents
z Configuration Operations
3.3.1 Microwave link
3.3.2 Alarm
3.3.3 Performance
3.3. 4 Linear MSP

T2000 Configuration – Creating a Microwave Link
z The T2000 allows you to create a Microwave link. You can view the
networking on the Main Topology.
Step 1 On the Main Topology, right-click and choose Microwave link from the
shortcut menu. Enter the information of the Microwave link.

Alternatively, click the icon on the toolbar to display the Create Link window.

Step 2 Click OK or Apply. The link is displayed as follows:

T2000 Configuration –Creating a Microwave Link
z When the source and the sink have different working modes, the
link status is abnormal.

Current Alarm Statistics
z An NE reports current alarms to the T2000.

z You can filter alarms according to the report time of
alarms.
z You can view alarm statistics in each NE.

Customizing Alarm Attributes
z You can customize alarm functions, such as alarm severity, alarm
suppression, and alarm reporting.
z The T2000 supports a maximum of 16 alarm templates.

Alarm Correlation Analysis and Suppression
A number of NE alarms Alarm analysis rule

Root alarm
Characteristics:
Retain the root alarms.
Suppress the non-root alarms.
Customize the analysis rules.
Suppress non-
root alarms

Customizing Performance Threshold
z The T2000 supports customization of a maximum of
16 performance thresholds.

History Performance Analysis
z The T2000 provides graphic history performance data analysis.

T2000 Configuration
z The T2000 and T2000 Web LCT are the same in terms of service configuration, IF
protection, IF and RF attributes, and communications. Refer to the description in the
T2000 Web LCT part.

Security Level: internal use
Thank You
www.huawei.com
www.huawei.com

OptiX RTN 600 Configuration-Using T2000 and T2000 Web LCT

Uploaded by

Copyright:

Available Formats

OptiX RTN 600 Configuration-Using T2000 and T2000 Web LCT

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

OptiX RTN 600 Configuration-Using T2000 and T2000 Web LCT

Uploaded by

Copyright:

Available Formats

Security Level: internal use

OptiX RTN 600 Configuration

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

z Huawei provides NE-level, subnet-level and network-level management

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

z Digital Microwave Communication principles

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

1. Introduction to Networks Management

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

z Platforms where the management systems are running

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

1. Introduction to Management Systems

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Introduction to the T2000 Web LCT

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

z Introduction to the T2000 Web LCT

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

 Step 6 Click Finish.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

z Introduction to the T2000 Web LCT

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Step 2 Enter a new ID and click OK.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Step 1 In the NE Explorer, choose Configuration > IF 1+1 Protection from

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

 Perform IF protection external switching. The priorities of external switching

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

ODU manufacturer information

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Step 6 Click Finish.

Perform IF protection external switching. The priorities of external switching