Car Stereo Kdr740bt
Car Stereo Kdr740bt
Car Stereo Kdr740bt
ESPAÑOL
FRANÇAIS
GET0842-001A [J]
Detach
KD-R740BT
Pull out the insulation sheet
when using for the first time.
How to reset
How to replace the battery
3 ENGLISH
5 ENGLISH
7 ENGLISH
Preparation: Preparation:
To Do this
Install the latest version of the Pandora application 1 Connect the optional SiriusXM Connect
into your device (iPhone/iPod touch), then log in and Pause or resume Press the volume knob (or on Vehicle Tuner (commercially available).
create an account with Pandora. playback RM-RK52).
• Select [ON] for [PANDORA] in [SRC SELECT]. (« 4) Antenna
Thumbs up or Press 1 / 2 . SiriusXM Connect
thumbs down • If thumbs down is selected, the Vehicle Tuner
Start listening current track is skipped.
1 Open the Pandora application on your device. Skip a track Press F (or 3 on RM-RK52).
2 Connect your device to the USB input terminal. Create a new 1 Press MENU. Expansion port on the rear panel
station 2 Turn the volume knob to select
USB 2.0 cable* 2 Activate the subscription through
USB input terminal (accessory of the [NEW STATION], then press the www.siriusxm.com/activatenow or call
iPhone/iPod touch) knob. 1-866-635-2349.
3 Turn the volume knob to select The Radio ID is required to activate the
[FROM TRACK] or [FROM ARTIST], SiriusXM Connect Vehicle Tuner.
and/ or then press the knob. The Radio ID is located on the label of the
A new station is created based on SiriusXM Connect Vehicle Tuner and can also
USB cable from the rear of the unit the current song or artist.
(KD-A845BT / KD-R840BT only) be shown on the unit’s display window when
Search for a 1 Press MENU. you select “Channel 0” after SiriusXM Connect
The source changes to PANDORA and broadcast registered 2 Turn the volume knob to make a Vehicle Tuner is connected.
starts. station
* Do not leave the cable inside the car when not
selection, then press the knob. 3 Press L SOURCE to select SIRIUS XM to
[BY DATE]: According to the start updating.
using.
registered date.
About Pandora [A–Z]: Alphabetical order.
Start listening
• Pandora is only available in the US. 3 Turn the volume knob to select
• Because Pandora is a third-party service, the the desired station, then press the 1 Press L SOURCE to select SIRIUS XM.
specifications are subject to change without knob. 2 Press MENU.
prior notice. Accordingly, compatibility may be Bookmark a 1 Press and hold the volume knob. 3 Turn the volume knob to select CATEGORY,
impaired or some or all of the services may become song or artist 2 Turn the volume knob to select then press the knob.
unavailable. information 4 Turn the volume knob to select a category
[THIS TRACK] or [THIS ARTIST], then
• Some functions of Pandora cannot be operated from from the list, then press the knob.
this unit. press the knob.
“BOOKMARKED” appears and the If “ALL CHANNEL” is selected, all the available
• For issues using the application, please contact
information is stored to your device. channels will be shown.
Pandora at pandora-support@pandora.com.
• If the version of the OS of the connected iPhone is The bookmark is available on your
earlier than 4.0, start the Pandora application before
Pandora account but not on this
selecting the PANDORA source.
unit.
9 ENGLISH
“PAIRING COMPLETED” appears when pairing is completed and “ ” will light up when Bluetooth
connection is established.
• “ ” will light up when a Bluetooth mobile phone is connected.
• “ ” will light up when a Bluetooth audio player is connected.
10
11 ENGLISH
12
13 ENGLISH
drop the disc when it is ejected. “CHK ANTENNA” Check the antenna and its connection are in good
condition.
Playback order is not as intended. The playback order is determined by the file name (USB) or
the order in which files were recorded (disc). “CHECK TUNER” Make sure the SiriusXM Connect Vehicle Tuner is
connected to the unit.
Elapsed playing time is not This depends on the recording process earlier.
correct. “NO SIGNAL” Make sure the antenna is mounted outside the vehicle.
“NOT SUPPORT” appears and Check whether the track is a playable format. (« 16) “SUBSCRIPTN UPDATED – Your subscription is updated. Press the volume knob to
track skips. ENTER TO CONTINUE.” continue.
“CANNOT PLAY” flashes and/ • Check whether the connected device is compatible with this “WRONG CODE” Make sure you have entered the correct pass code. (« 9)
or connected device cannot be unit and ensure the files are in supported formats. (« 16)
detected. • Reattach the device.
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
17 ENGLISH
Bluetooth®
• Other Bluetooth devices might be trying to connect to the
“PAIRING FULL” appears. The number of registered devices has reached its limit. Retry unit.
after deleting an unnecessary device.
The connected Bluetooth • Check whether the connected Bluetooth audio player
“PLEASE WAIT” appears. The unit is preparing to use the Bluetooth function. If the audio player cannot be supports Audio/Video Remote Control Profile (AVRCP).
message does not disappear, turn off and turn on the unit, controlled. (Refer to the instructions of your audio player.)
then connect the device again. • Disconnect and connect the Bluetooth player again.
“ERROR CNNCT” appears. The device is registered but the connection has failed. “HW ERROR” appears. Reset the unit and try the operation again. If “HW ERROR”
Connect the device manually. (« 14) appears again, consult your nearest service center.
“BT DEVICE NOT FOUND” The unit failed to search for the registered Bluetooth devices
Bluetooth®
18
USB
Frequency Response 40 Hz to 20 000 Hz
Compatible File Systems FAT 32/16/12
Signal-to-Noise Ratio 80 dBA (reference: 1 W into 4 Ω)
Playable Audio Formats KD-A845BT / KD-R840BT: MP3/WMA/WAV
Line-Out, Subwoofer-Out Level/ KD-A845BT / KD-R840BT: KD-R740BT: MP3/WMA
Impedance 4.8 V/10 kΩ load (full scale)
KD-R740BT: Maximum Supply Current DC 5 V d 1 A
2.5 V/10 kΩ load (full scale)
Version Bluetooth 2.1 certified (+EDR)
BLUETOOTH
Output Impedance ≤ 600 Ω
Power Class Class 2 Radio
FM Frequency Range 87.9 MHz to 107.9 MHz (200 kHz step) Service Area 10 m
87.5 MHz to 108.0 MHz (50 kHz step)
Profile HFP 1.5, OPP 1.1, A2DP 1.2, AVRCP 1.3, PBAP 1.0
Usable Sensitivity 9.3 dBf (0.8 μV/75 Ω)
50 dB Quieting Sensitivity 16.3 dBf (1.8 μV/75 Ω) Power Requirements (Operating Voltage) DC 14.4 V (11 V to 16 V allowance)
Grounding System Negative ground
Tuner
19 ENGLISH
Caution
• For safety’s sake, leave wiring and mounting to professionals. Consult
the car audio dealer. Do the required wiring.
• Install this unit in the console of your vehicle. Do not touch the metal (« 21)
parts of this unit during and shortly after use of the unit. Metal parts
such as the heat sink and enclosure become hot.
• Do not connect the · wires of speaker to the car chassis, Ground wire
(black), or in parallel.
• Connect speakers with a maximum power of more than 50 W. If the Bend the appropriate tabs to hold
maximum power of the speakers is lower than 50 W, change the the sleeve firmly in place.
[AMP GAIN] setting to avoid damaging the speakers. (« 15)
• Mount the unit with the angle of 30° or less.
• If your vehicle wiring harness does not have the ignition terminal, Make sure the direction of
connect Ignition wire (red) to the terminal on the vehicle’s fuse box the trim plate.
which provides 12 V DC power supply and is turned on and off by the
ignition key.
• After the unit is installed, check whether the brake lamps, blinkers, When installing without the mounting sleeve How to remove the unit
wipers, etc. on the car are working properly.
• If the fuse blows, first make sure the wires are not touching car’s Flat or round head screws (not supplied)
chassis, then replace the old fuse with one that has the same rating. M5 × 8 mm (M5 × 3/8")
Basic procedure
1 Remove the key from the ignition switch, then
disconnect the · terminal of the car battery.
2 Connect the wires properly. Pocket
See Wiring connection. (« 21) Bracket (not supplied)
3 Install the unit to your car.
See Installing the unit (in-dash mounting).
4 Connect the · terminal of the car battery.
5 Reset the unit. (« 3)
20
GE40401-001 A
Eesti Nederland
Es fla No e
EAA6oa Polska
GET0820-001A
Downloaded from www.Manualslib.com manuals search engine II
~CAUTION CONNECT BLACK WIRE (<l)GND) TO GROUND FIRST.
OTHERWISE, DAMAGE TO YOUR UNIT MAY OCCUR.
INCORRECT CONNECTION CAUSES SERIOUS DAMAGE TO THIS UNIT
PLEASE READ INSTALLATION/CONNECTION MANUAL CAREFULLY.
CD
CONNECT GROUND FIRST CONNECT OTHER WIRES
~ @ THE UNIT
Caution
To prevent electrical shock, do not open the cabinet.
There are no user serviceable parts inside.
Please refer to qualified service personnel for repairs.
PRODUCT REGISTRATION
We suggest that you register your product since it will enable us
to contact you directly if it is ever necessary to correct a safety related
condition in your product.
You can register at www.register.jvc.com
Please note that failure to register does not diminish any of your rights
during the warranty period.
BT-51018-7
(0812) Printed in Indonesia
*
* JVC AMERICAS CORP. * *
; 1700 Valley Road, Wayne, New Jersey 07470 ;
* http://www.jvc.com *
* *
******************************************************************************
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAIL
OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY
INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT.