Nothing Special   »   [go: up one dir, main page]

Questions Based On Network Topology Multple Chooice

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

Questions based on network topology

1. Physical or logical arrangement of network is __________


a) Topology
b) Routing
c) Networking
d) Control
2. Which network topology requires a central controller or hub?
a) Star
b) Mesh
c) Ring
d) Bus
3. _______ topology requires a multipoint connection.
a) Star
b) Mesh
c) Ring
d) Bus

4. Data communication system spanning states, countries, or the whole world is


________
a) LAN
b) WAN
c) MAN
d) PAN

5. Data communication system within a building or campus is________


a) LAN
b) WAN
c) MAN
d) PAN

6. WAN stands for __________


a) World area network
b) Wide area network
c) Web area network
d) Web access network

7. In TDM, slots are further divided into __________


a) Seconds
b) Frames
c) Packets
d) Bits
8. _____ is the multiplexing technique that shifts each signal to a different carrier
frequency.
a) FDM
b) TDM
c) Both FDM & TDM
d) PDM

9. The three topologies associated with LANs are _________


a) Mesh, Tree and Bus topology
b) Tree, Circular and Ring topology
c) Bus, Ring and Star topology
d) Hybrid, Mesh and Star topology

10. A pseudo topology that combines a Star topology with either Ring or Bus topology is
known as ___________
a) Router
b) Hub
c) Ethernet
d) Switches

11. The Tree topology is employed in network using ________


a) Brouters
b) LAN
c) Switches
d) WAN

12. ________ topology is a combination of two or more topologies.


a) Star
b) Hybrid
c) Bus
d) Ring

13. The two types of LAN deployed are __________ and ___________
a) Mesh based, Bus based
b) Hybrid based, Star based
c) Bus based, Ring based
d) Ring based, Tree based

14 . Bus Architecture is implemented in LANs using ________


a) Address Resolution Protocol (ARP)
b) Hypertext Transfer Protocol (HTTP)
c) File Transfer Protocol (FTP)
d) Ethernet Protocol
15. Token Ring and FDDI configurations use the _________ topology.
a) ring
b) star
c) mesh
d) bus

16. Which protocol is most frequently used in Star topology?


a) Modem
b) Cable
c) DSL
d) Ethernet

17. Linear network topology is more expensive than other topologies.


a) True
b) False

18 .FDDI can cover a much larger geographical area than Token Ring on copper.
a) True
b) False

19 . WANs are configured using the ______ or the ______ topology.


a) Bus, Tree
b) Mesh, Ring
c) Ring, Hybrid
d) Mesh, Tree

20 .FDDI stands for _________


a) Fiber Distributed Data Interface
b) First Digital Data Interface
c) Fast Data Distribution Index
d) Fiber Distributed Data Index

21 . Ethernet protocol is specified by __________


a) IEEE 802.2 standard
b) IEEE 802.3 standard
c) IEEE 802.5 standard
d) IEEE 802.11 standard

22 .. WAN differs from LAN in that it links networks that are geographically separated by
a short distance.
a) True
b) False
23 . The Tree structure starts with a ______ node.
a) Prime
b) Chief
c) Beginner
d) Header

24 .In a Ring topology network, the data flows ________


a) in one direction only
b) away from the tokens on the ring
c) in several directions
d) in a direction where the computers in a network are fully functional

25 .In a network topology, when a data signal is transmitted, there are chances that this
signal may bounce back to the device that has already carried the signal. In order to avoid
this, we must use _____ at the end.
a) cap
b) beret
c) end cap
d) terminator

26 , Mesh topology is highly reliable.


a) True
b) False

You might also like