Eaton 294032 DILK25 11 (230V50HZ, 240V60HZ) en - GB
Eaton 294032 DILK25 11 (230V50HZ, 240V60HZ) en - GB
Eaton 294032 DILK25 11 (230V50HZ, 240V60HZ) en - GB
Contactor for capacitors, with series resistors, 25 kVAr, 230 V 50 Hz, 240 V
60 Hz
General specifications
Product name Eaton Moeller® series DILK capacity contactor
EAN 4015082940324
Certifications UL 60947-4-1
UL Category Control No.: NLDX
CSA File No.: 012528
UL
CSA
CSA Class No.: 3211-04
CE
CSA-C22.2 No. 60947-4-1-14
IEC/EN 60947
UL File No.: E29096
IEC/EN 60947-4-1
Catalog Notes Due to their special contacts, the contactors for capacitors are weld-resistant for
capacitors with inrush current peaks up to 180 × I#
In the case of group compensation multi-stage capacitor banks are connected to
the mains, as required. Transient currents of up to 180 × Ie could flow between the
capacitors.
General information
Application Contactors for power factor correction
Protection Finger and back-of-hand proof, Protection against direct contact when actuated
from front (EN 50274)
Voltage type AC
Terminal capacities
Terminal capacity (flexible with ferrule) 1 x (0.75 - 16) mm², Main cables
Electrical rating
Switching capacity
Switching capacity (auxiliary contacts, general use) 10 A, 600 V AC, (UL/CSA)
1 A, 250 V DC, (UL/CSA)
Magnet system
Arcing time 10 ms
Power consumption, pick-up, 50 Hz 58 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz
Power consumption, pick-up, 60 Hz 71 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz
Power consumption, sealing, 50 Hz 2.1 W, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz
7.6 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz
Power consumption, sealing, 60 Hz 9.3 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz
2.1 W, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz
Contacts
Making capacity without damping (I-peak value) 180 x Ie
Design verification
Equipment heat dissipation, current-dependent Pvid 9.3 W
10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements.
10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of assemblies Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard's requirements.
10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility.
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Electric engineering, automation, process control engineering / Low-voltage switch technology / Contactor (LV) / Capacitor contactor (ecl@ss13-27-37-10-06 [AGZ569020])
Width mm 45
Height mm 135
Depth mm 138