SP 1158 v1.1 Ew IEM G4 Product Specification EN
SP 1158 v1.1 Ew IEM G4 Product Specification EN
SP 1158 v1.1 Ew IEM G4 Product Specification EN
evolution wireless G4
ew IEM G4 | Wireless Monitor Set
Full control over your performance – your direct link, everywhere, everyday. The G4 In-Ear Monitoring Sets make your gig
an extraordinary experience – not just for your audience, but also for you.
Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency
spectrum for daily use on stage.
evolution wireless G4
ew IEM G4 | Wireless Monitor Set
SPECIFICATIONS
CONNECTIONS
PRODUCT SPECIFICATION 3/7
evolution wireless G4
ew IEM G4 | Wireless Monitor Set
SPECIFICATIONS
EK IEM G4
AF characteristics
RF characteristics Compander system Sennheiser HDX
Modulation Wideband FM Signal-to-noise ratio (1 mV, approx. 90 dBA
Frequency ranges A1: 470 - 516 MHz peak deviation)
A: 516 - 558 MHz Total harmonic distortion ≤ 0.9 %
AS: 520 - 558 MHz (THD)
G: 566 - 608 MHz
GB: 606 - 648 MHz Output power at 2.4 V, 2 x 100 mW at 32 Ω
B: 626 - 668 MHz 5 % THD, nominal deviation
C: 734 - 776 MHz High Boost +8 dB at 80 kHz
D: 780 - 822 MHz
Limiter –18 dB to –6 dB,
E: 823 - 865 MHz
adjustable in steps of 6 dB,
Receiving frequencies Max. 1680 frequencies, can be switched off
adjustable in 25 kHz steps
Overall device
20 frequency banks, each
with up to 16 factory-preset Temperature range -10 °C to +55 °C
channels, no intermodula- Power supply 2 AA batteries, 1.5 V or
tion BA 2015 accupack
evolution wireless G4
ew IEM G4 | Wireless Monitor Set
DIMENSIONS
SR IEM G4 212.1
8.35
1.61
43.2
41
1.7
23.7
0.93
9.7 15.3
12.2
15.45
0.48
14.35
15.2
0.61
0.56
0.38 0.6
0.6
28.7 50.8
1.13 2
47.6 92.3
1.87 3.63
66.7
2.63
90.6
3.57
20.7
0.81
13.4
0.53
15.1
12.8
0.59
0.5
168
6.61
PRODUCT SPECIFICATION 5/7
evolution wireless G4
ew IEM G4 | Wireless Monitor Set
DIMENSIONS
EK IEM G4
4.72
max. 120
84.3
3.32
3,5mm Klinke
3,5mm plug
10 OFF
1.22
31
6 4
65.3
2.57
PRODUCT SPECIFICATION 6/7
evolution wireless G4
ew IEM G4 | Wireless Monitor Set
PRODUCT VARIANTS
ew IEM G4-A1 470 - 516 MHz Art. no. 507828 ew IEM G4-A1 470 - 516 MHz Art. no. 508167
ew IEM G4-A 516 - 558 MHz Art. no. 507829 ew IEM G4-A 516 - 558 MHz Art. no. 508168
ew IEM G4-GB 606 - 648 MHz Art. no. 507830 ew IEM G4-AS 520 - 558 MHz Art. no. 508169
ew IEM G4-G 566 - 608 MHz Art. no. 507831 ew IEM G4-G 566 - 608 MHz Art. no. 508170
ew IEM G4-B 626 - 668 MHz Art. no. 507832 ew IEM G4-B 626 - 668 MHz Art. no. 508171
ew IEM G4-C 734 - 776 MHz Art. no. 507833 ew IEM G4-C 734 - 776 MHz Art. no. 508172
ew IEM G4-E 823 - 865 MHz Art. no. 507834 ew IEM G4-D 780 - 822 MHz Art. no. 508173
ew IEM G4-TH 794 - 806 MHz Art. no. 508583
ARCHITECT‘S SPECIFICATION
A wireless RF monitoring system consisting of a stereo rack-mount transmitter and a compact monitoring receiver.
The transmitter shall operate within nine UHF frequency ranges, with a switching bandwidth of up to 42 MHz: 470 –
516 MHz, 516 – 558 MHz, 520 – 558 MHz, 626 – 668 MHz, 734 – 776 MHz, 780 – 822 MHz, 823 – 865 MHz, 566 – 608 MHz,
606 – 648 MHz; transmitting frequencies shall be 1,680 per range and hall be tunable in 25 kHz steps. The transmitter
shall feature 20 fixed frequency banks with up to 16 compatible frequency presets and 6 user banks with up to 16 user
programmable frequencies.
The transmitter shall be menu-driven with a backlit OLED display showing the current frequency, frequency bank and
channel number, metering of AF level, transmission status, transmission power, equalizer setting, input sensitivity, and
lock status. An auto-lock feature shall be provided to prevent settings from being accidentally altered.
The parameters of associated receivers shall be configurable in the transmitter menu and synchronized with the receivers
via an integrated infrared interface.
Frequency stability shall be ±10 ppm. RF output power at 50 Ω shall be switchable between 10 mW (low), 30 mW (stan-
dard) and 50 mW (high).
The stereo audio input shall utilize two discrete (left/right) electronically balanced ¼“ (6.3 mm) jack/XLR-3F combo
sockets; the audio output shall utilize a balanced ¼“ (6.3 mm) jack socket; an audio loop output shall be provided utilizing
two balanced ¼“ (6.3 mm) jack sockets. A headphone output with headphone volume control shall be provided and shall
utilize a ¼“ (6.3 mm) stereo jack socket. The transmitter shall have an Ethernet port (RJ-45) for remote network-based
monitoring and control using the Sennheiser Wireless System Manager software. One 50 Ω BNC-type input socket shall
be provided for connecting the antenna.
Nominal/peak deviation shall be ±24 kHz/±48 kHz. The transmitter shall incorporate the Sennheiser HDX compander
system and shall include a 19-kHz MPX pilot tone with a ±5 kHz deviation. The audio frequency response shall range from
25 –15,000 Hz. Maximum input level shall be +22 dBu. Total harmonic distortion (THD) at 1 mV and nominal deviation shall
be < 0.9 %. Signal-to-noise ratio at nominal load and peak deviation shall be > 90 dB.
The transmitter shall operate on 12 V power supplied from the NT 2-3 mains unit (for 100 – 240 V AC, 50/60 Hz). Power
consumption shall be 350 mA. The transmitter shall have a rugged metal housing; dimensions shall be approximately 202
x 212 x 43 mm (7.95“ x 8.35“ x 1.69“). Weight shall be approximately 980 grams (2.16 lbs). Operating temperature shall
range from −10 °C to +55 °C (+14 °F to +131 °F).
The transmitter shall be the Sennheiser SR IEM G4.
PRODUCT SPECIFICATION 7/7
evolution wireless G4
ew IEM G4 | Wireless Monitor Set
The receiver shall operate within nine UHF frequency ranges, with a switching bandwidth of up to 42 MHz: 470 – 516 MHz,
516 – 558 MHz, 520 – 558 MHz, 626 – 668 MHz, 734 – 776 MHz, 780 – 822 MHz, 823 – 865 MHz, 566 – 608 MHz, 606 –
648 MHz; receiving frequencies shall be 1,680 per range and shall be tunable in 25 kHz steps. The receiver shall feature
20 fixed frequency banks with up to 16 compatible frequency presets and 6 user banks with up to 16 user programmable
frequencies.
The receiver shall be menu-driven with a backlit LC display showing the current frequency, frequency bank and channel
number, metering of RF level, metering of AF level, lock status, battery status, muting function or audio channels, and
pilot tone evaluation. An auto-lock feature shall be provided to prevent settings from being accidentally altered.
The receiver parameters shall either be configurable in the associated transmitter’s menu and synchronized with the
receiver via an integrated infrared interface or shall be programmable in the receiver menu.
The earphone output shall utilize a 3.5 mm stereo jack socket with an output level of 2.4 V with 5 % THD at nominal devia-
tion and an output power of 2x 100 mW at 32 Ω.
Nominal/peak deviation shall be ±24 kHz/±48 kHz. Squelch threshold shall be defeatable (off) or adjustable from 5 -
25 dBμV in steps of 2 dB.
The receiver shall incorporate the Sennheiser HDX compander system and a defeatable pilot tone squelch. Sensitivity
shall be < 4 μV, 1.6 μV (typical) for 52 dBArms S/N with HDX engaged at peak deviation. Adjacent channel rejection shall
be ≥ 65 dB (typical). Intermodulation attenuation shall be ≥ 70 dB (typical); blocking shall be ≥ 80 dB.
Signal-to-noise ratio at 1 mV and peak deviation shall be approx. 90 dB. Total harmonic distortion (THD) shall be ≤ 0.9 %.
The earphone output shall utilize a 3.5 mm stereo jack socket with an output level of 2.4 V with 5 % THD at nominal devia-
tion and an output power of 2x 100 mW at 32 Ω.
The receiver shall include a switchable High Boost and a multi-level limiter. The High Boost shall be +8 dB at 80 kHz.
The limiter shall be adjustable from –18 dB to –6 dB in 6 dB steps or defeatable (off). The receiver shall provide two audio
output modes, stereo or Focus, and an adjustable balance.
Power shall be supplied to the receiver by two 1.5V AA size batteries or by one Sennheiser BA 2015 rechargeable ac-
cupack. Nominal voltage shall be 2.4 V, current consumption shall be typical 140 mA at nominal voltage; ≤ 25 μA when
receiver is switched off. Operating time shall be approximately 4 to 6 hours (depending on volume level). The receiver
shall have a rugged metal housing; dimensions shall be approximately 82 x 64 x 24 mm (3.23“ x 2.52“ x 0.94“). Weight
including the batteries shall be approximately 125 grams (0.28 lbs). Operating temperature shall range from −10 °C to +55
°C (+14 °F to +131 °F).
The receiver shall be the Sennheiser EK IEM G4.
Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com