2005 RJ Brochure
2005 RJ Brochure
2005 RJ Brochure
Site & Flow Planning Red Jacket’s Flow Optimization Knowledgeable Support is Only a
At Red Jacket we focus on three keys to Software Guide Phone Call Away
fueling profitability. Planning flow patterns at a site is an If your site has unique characteristics
important step towards top perfor- or equipment configurations that our
• Providing the information you need to
mance. Veeder-Root has developed a Flow Optimization Software doesn’t
choose a solution for your specific site
comprehensive software guide that takes support, or that require specialized
• Helping you ensure environmental you through the variables of a fueling knowledge, our application personnel
compliance and fueling system uptime site. Intuitive and easy-to-use, Red Jacket on the Red Jacket Flow Hotline are
• Reducing your total cost of owner- Flow Optimization Software uses infor- available to help. Contact them at our
ship to maximize your fueling profit mation and equipment specs to identify 800# in the U.S., or call your local
potential the correct STP model to optimize flow. Veeder-Root office.
Pump upgrades:
Upgrading the size (HP rating) of your
pumps can have a substantial benefit at
high volume sites. A simple upgrade from
a 1 1/2 HP to a 2 HP pump can increase
flow by over 22% when 8 nozzles are
operating. Over the course of a 3-hour
peak period that can translate to an
additional 381 gallons of fuel pumped.
Manifolded systems provide higher flow rates and improved uptime.
Manifolded systems:
Manifolding two or more pumps Another benefit of manifolded systems siphon systems often can’t transfer
together provides redundancy and is superior inventory management. At fuel fast enough to avoid product
system uptime even if one pump requires sites using product blending, a run-out. A manifolded system will
service, as well as the ability to achieve manifolded system will ensure that all overcome this problem and ensure that
higher flow rates when a large number of three products keep flowing, even if one product is available throughout peak
nozzles are open at the same time. pump fails. During “fueling rush hours” fueling periods.
30
Whichever Red Jacket STP technology
25
you choose, our sales and service
20 organization will be there to support
15 you, anywhere in the world.
10
0
0 10 20 30 40 50 60 70 80 90 100
Flow (GPM)
* As measured in third party tests at STP discharge head.
Submersible Turbine Pumps
The Red Jacket Submersible Turbine Pump
Advanced environmental protection, serviceability, safety and flow
Performance Benefits • Wide range of fuel compatibility
• Available fixed and variable speed – Diesel; 100% gasoline; 80% gasoline
• Lowest pressure drop across the with 20% TAME, ETBE, or MTBE;
packer manifold optimizes flow with 0-100% Ethanol; 0-100% Methanol
any sized motor Service and installation benefits
Environmental Benefits • Quick, simple and safe yoke assembly
• Service spill elimination • Easy to service and install extractable
– Check valve design • Manifold design flexibility for vertical
– Spill-free extractable or horizontal discharge
• Prevents false alarms and downtime • Built-in contractor’s box eliminates
– Vacuum Sensor Siphon System need for yoke adjustments
• Environmental compliance without
fuel flow restrictions
– Integrates with V-R PLLD systems
IQ Control Box
Easy to use, easy to install control for manifolded pump systems
Performance Service and installation benefits
• Provides motor protection from dry • Single press and hold button for
run conditions easy calibration
• Protects wiring and controls from • Easy-to-use wiring terminal with
locked rotor or high currents familiar labeling
• Monitors site power conditions to • Easily retrofitted to existing locations
ensure uninterrupted fueling and
long motor life
Isotrol 1-8
The most versatile dispenser handle signal isolation system available today
Performance Service and installation benefits
• Isolates the handle signals between • Dedicated Automatic Tank Gauge
each dispenser (ATG) line leak output and coil
• Isolates and protects individual terminals are labeled for easy wiring
dispensers from wiring shorts or and compatibility
phasing issues • May be used with Red Jacket’s
• Isolates and protects technicians Submersible Turbine Pump,
from dangerous feedback during Big Flo Pump or IQ Control Box,
service or as a “stand alone” with on-board
30-amp power relay
• Easily retrofitted to existing locations
Accessories
Veeder-Root PLLD Pressurized Line Leak Detection System
Protect your investment while maximizing fuel sales
Performance Service and installation benefits
Increased flow rate saves you money • Eliminates the recurring cost of
• .5 GPM per nozzle higher flow rate replacement of MLLD
vs. MLLD • Eliminates the need for annual line
• 2 GPM per nozzle higher flow rate testing
vs. ELLD • Eliminates the need for annual
mechanical test
Trapper™
Your savings begin when the Trapper goes in
Performance Service and installation benefits
• Specially designed screen blocks • Reduces filter changes to as low as
tank particulates from entering the once per year per line, saving on
fluid system, prolonging filter life labor and filter costs
• Continuous slot design prevents • Reduces product spills and the
accumulation and lodging of potential for liability by reducing
particles present in underground the number of filter changes
tanks, maintaining peak pumping • Self-cleaning, non-clog design
performance dramatically reduces maintenance costs
800-323-1799
For international sales and support, please
contact your local sales office.
Red Jacket offers sales and applications support virtually anywhere in the
world. We’re committed to helping you improve your fueling profitability by
developing new fuel delivery technologies that maximize fuel flow and deliver
the best total cost of ownership. Please contact us at the closest location listed
above, or visit us at www.redjacket.com. North America for inside sales call
1-888-561-7942
© 2004 Veeder-Root Company • 125 Powder Forest Drive • Simsbury, CT 06070 • USA
Telephone: 860-651-2700 • Fax: 860-651-2719 • www.veeder.com