PC Software Help HDS200&300
PC Software Help HDS200&300
PC Software Help HDS200&300
Software Install
When the software enters into the main interface as Fig 2-1 which
Fig 2-1
1. Menu Bar: provide various functions introductions.
displayed.
simultaneously).
current waveform.
6. Time base division range: which is used for observe and set the
7. Voltage division range: which is used for observe and set the
III. Menu
(1)File(Fig 3-1)
Fig 3-1
5) Print: by printer.
Fig 3-2-1
documents. The list supply check all or check none, the right
3) Grids color: Bring out the color dialogue box and change the
color.
bring out the color dialogue box and change the background
color.
Fig 3-3
1) Data Line: draw the sampling point and connect by lines.
Fig 3-4-1
set up.
Note: You can get the data from instrument after connecting PC
with USB cable and install driver and then choose the correct
interface setting.
Click "browse" to bring out the "save file" dialogue box and set the
"close window and load" when finishing, only bin file can load
Fig 3-4-3
uploading.
that you used the function of auto acquirement to record data files
Delay(ms)], then you can click the Start Arrow Button to display the
(5)Language(Fig 3-5)
Fig 3-5: Language menu
(6)Help(Fig 3-6)
Fig 3-6
IV. Toolbar:
follows:
1 2 3 4 5 6 7 8 9 10 11 12 13
grids background
6 Display linked Draw the sampling point and connect in direct line
waveform
point
setting
acquirement
acquirement
V. Relevant operations
current waveform.
make the waveform move up and down, the moving area is the
check the current blocks on the right of cursor area, a block 1/8
(2) Waveform move left and right: Move the mouse to the waveform,
it becomes icon, then drag the mouse to make the waveform left
(3) Change the color of waveform: double click "CH1" to bring out
(4) The time base division of current waveform can be shown and
adjusted in such area (as Fig 5-1-2) which is the time range
and adjust the scale in the come box, the waveform zoom to the
shaft.(Fig 5-1-3).
Fig 5-1-2
Fig 5-1-3
(5) In this aspect, voltage division can be use to show and adjust
which are only for reference.) and adjust the scale in the come
There are four cursor types for selection to measure and locate,
such as: none, horizontal line, vertical line, double line (that is
horizontal line and vertical line display at the same time) (Fig 5-2)
Fig 5-2
(2) Horizontal line: Drag the two horizontal lines in the waveform
(3) Vertical line: Drag the two vertical lines in the waveform area left
value of the two vertical lines( the leftmost is zero value of time),
lines.
(4) Double lines (Fig 5-1-3): The vertical line and the horizontal line
are all in the waveform area and be measured at the same time.
The user can click some channel in the channel box or some
simultaneously.
Fig 5-3