D - REVIEWED FOR INFORMATION ONLY

Authorization to proceed does not relieve Contractor/Supplier of its responsibility

or liability under the Contract and or Purchase Order.

By: FRamirez,RAM29903,9/17/2019

CERTIFIED

DATASHEET OF CONVEYOR 2290-CV-252

Project : Spence Growth Option Project

Plant : Filter Plant Conveyor System
Client : Empresa Constructora Fluor Salfa SGO Ltda., Santiago, Chile.
Project No. : 48254
Client Doc. No. : 4-V2-2290-ME-DAS-182002
FLS Doc. No. : 48254-FLS-2290-ME-DAS-002

04-sept-19 1 ISSUED FOR DETAIL ENGINEERING PREKU-IN APT-IN

16-jul-19 0 ISSUED FOR DETAIL ENGINEERING MUSJ-IN APT-IN
30-JAN-2019 C ISSUED FOR CLIENT APPROVAL MUSJ-IN APT-IN
02-nov-18 B ISSUED FOR CLIENT APPROVAL MUSJ-IN JCC-IN
12-oct-18 A ISSUED FOR INTERNAL REVIEW MUSJ-IN APT-IN
Date Rev. Description Prepared by Approved by
Documentum No.: 50090633-5.0

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 1/1
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. : 48254 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1

DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET A1
OPERATING AND DESIGN CONDITIONS

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

1 I. GENERAL
2 REQUISITION NUMBER:
3 EQUIPMENT Belt Conveyor Belt Conveyor
4 SERVICE: Continuous Continuous
5 QUANTITY REQUIRED: One (1) One (1)

6 NOMENCLATURE
7 NAP: Not Applicable
8 VTS: Vendor to Specify
9 NAV: Not Available
10 TBA: To Be Advised
11 TBD: To Be Defined

12 II. OPERATION
13 SERVICE TYPE HEAVY DUTY HEAVY DUTY
14 DESIGN AMBIENT TEMPERATURE
15 Min./Máx. °C 0 / 33 0 / 33
16 DESIGN RELATIVE HUMIDITY
17 Min./Máx. % 11 / 45 11 / 45
18 INSTALLATION ALTITUDE m.a.s.l. 1 750 1 750
19 LOCATION (Indoors / Outdoors) Indoors Indoors
20 OPERATION TIME
21 Hours/Year 8 322 8 322
22 Run time % 95 95
23 ENVIRONMENT
24 Clean / Dusty Dusty Dusty
25 Dry / Wet Wet Wet
To comply with Structural Design Criteria To comply with Structural Design Criteria
26 Seismic Zone
4-V2-2000-ST-DES-0001 4-V2-2000-ST-DES-0001
See Technical Specification Structural See Technical Specification Structural
27 Seismic Design Importance Factor Requirements for Equipment 4-V2-2000- Requirements for Equipment 4-V2-2000-
ST-SPE-0005 ST-SPE-0005
28 MATERIAL DESCRIPTION
29 Type of Material Filtered copper concentrate Filtered copper concentrate
30 Solid Specific Gravity
31 Bulk Density (wet) kg/m3 2200 / 2600 2200 / 2600
32 Moisture (wet basis) % 8 / 10 12
33 Idler Trough Angle degree VTS 35
34 Repose Angle degree 45,0 25
35 Surcharge Angle degree VTS 10
36 Lump Size mm VTS max. 50
37 OPERATING DATA
38 Feeding by Press filter discharge 2290-CV-251
39 Discharge to Sampling system / transfer CV 2290-CV-253
40 Capacity, Design mtph VTS 300 0
41 Belt Width mm 762 762
42 inch 30 30
43 Preferred Belt Speed m/s VTS 1,52 0
Distance Between Centers (*) 52,00 52,85

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 1/3
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. : 48254 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1

DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET A1
OPERATING AND DESIGN CONDITIONS

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

44 Distance Between Centers (*) m 52,00 52,85

45 Total height m 16,5 14.17
46 Maximum slope degrees 17,5 15,0
47

48 III. MECHANICAL EQUIPMENT DATA

49 CONVEYOR DRIVE
50 Starting Type VTS Direct
51 Preferred Number of Drivers / Location 1 / Head pulley 1 / Head pulley
52 Brake yes/no VTS NAP
53 Backstop yes/no VTS Yes, Intergral to Gear box
54 Electric Motor yes/no Yes Yes
55 Gear Reducer yes/no Yes Yes
56
57 CONVEYOR IDLES
Carry: Minimum Rating / Type Idler /
58 C5 / 35 deg Equal Rolls / 1.0m
Spacing
Return: Minimum Rating / Type Idler /
59 C5 / Flat Rolls / 3.0m
Spacing
60 Impact: Type Idler / Spacing C5 / 35 deg Equal Rolls / 0.4m
61
62 SPECIAL REQUESTS
63 Structure Type Stringer & Truss Enclosed Gantry
64 Belting Type RMA I or DIN X DIN Y
65 Minimum Top Cover Thickener mm VTS 12,0
66 Minimum Bottom Cover Thickener mm VTS 4,0
Plug Chute Start Condition Design
67 yes/no No No
(Description)
68 Belt Scale yes/no No NAP
69 Size Rock Analyzer yes/no No NAP
70 Take-Up Type VTS Gravity
71 Conveyor Cover yes/no No Yes
72 Dust Suppression in Skirtboard yes/no Yes NAP
73 Belt Splicing and Reeling Station yes/no Yes - VTS Yes - By Client
74 Lateral Protections yes/no Yes Yes
75 Transfer Tower yes/no Yes Yes
76 Reels Supports yes/no Yes No
77 Rock Boxes (Adjustable) Design Chute yes/no Yes No
78 Head Chute yes/no Yes Yes
79 Feeding Chutes yes/no Yes Yes
80 Maintenance Hoists yes/no Yes Yes
81

82 IV. UTILITIES
83 Medium Voltage V / Hz / ph 4000 / 3 / 50 NAP
84 Low Voltage (for motors) V / Hz / ph 460 / 3 / 50 480 / 3 / 50
85 Low Voltage (for other loads) V / Hz / ph 380 / 3 / 50 380 / 3 / 50
86 Control Voltage [ V / Hz ] 120 VAC / 50 120 VAC / 50

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 2/3
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. : 48254 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1

DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET A1
OPERATING AND DESIGN CONDITIONS

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

87 Plant Air kPag 690 690

88 Instrument Air Min/Max kPag 550 / 690 550 / 690

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 3/3
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

1 I. EQUIPMENT IDENTIFICATION
2 BIDDER:
3 ADDRESS:
4 PHONE /FAX:
5 E-MAIL:
6 MODEL:
7 SIZE:

8 II. EQUIPMENT GENERAL INFORMATION

9 1, GENERAL DESIGN
10 Capacity, Design mtph VTS 300 C
11 Capacity, Conveyor Operating mtph VTS 300 C
12 DIN Friction Factor (Normal Friction) VTS As per CEMA C
13 DIN Friction Factor (Low Friction) VTS As per CEMA C
14 DIN Friction Factor (High Friction) VTS As per CEMA C
15 Distance Between Centers m 52,00 52.850 C
16 Total Height m 16,5 14.17 C
17 Belt Width inch 30 30 C
18 Belt Width mm 762 762 C
19 Density For Design (Wet) kg/m3 2200 / 2600 2200/2600 C
20 Moisture (Wet Basis) % 8 / 10 12 C
21 Lump Size mm 0 max 50 C
22 Troughing angle degree VTS 35 C
23 Repose Angle degree 45 25 C
24 Surcharge Angle degree 0 10 C
25 Belt Speed m/s VTS 1.52 C
Belt CEMA Loading At Full Design
26 % 75 44 C
Capacity
27 Calculate Power kW VTS 22.6 C
28 Motor Name Plate Power kW VTS 37 C
Soft Starting Method (Direct, VFD,
29 VTS Direct C
Fluid Coupling, SCR or Other)
30 Electromechanical Availability % 96 96 C
31 Plug Chute Starting Condition Yes / No Yes No C
Indicate Miscellaneous Load For Plug
32 kN VTS NAP C
Chute
33 Maximum Running Belt Tension kN VTS 25.1 C
34 Take-Up Belt Tension kN VTS 12.4 C
35 Tail Belt Tension kN VTS 12.1 C
36 Total Mass, Approximate kg VTS 68622 1
37
38 2, BELT
39 2,1 BELTING
40 Manufacturer VTS Phoenix C
41 Original Country VTS China C
42 Belt Width mm / inch 762 / 30 762/30 C
43 Belting Type VTS EP C
44 Belt Carcass Material VTS EP C
45 Belt Safety Factor VTS >10 C
46 Length Required m VTS 122 C
47 Normal Running Tension kN/m VTS 25,1 C
Maximum Acceleration / Deceleration
48 kN/m VTS 38 C
Tension
49 Belting Rating kN/m VTS 400 C
50 Ultimate Tension kN/m VTS 440 C
51 Plies VTS 3 C
52 Cover Specification VTS DIN Y C
53 Top Cover Thickness mm VTS 12±0.6 C
54 Bottom Cover Thickness mm VTS 4±0.2 C
55 Carcass Thickness mm VTS 3 C
56 Cover Edge VTS ≥ 15 C
57 Estimation Life months VTS 24 C
58 Belting Weight kg/m VTS 16,8 C
59 Belt Temperature Rating °C VTS -20 +60 C
60 Abrasion Resistence mm3 VTS ≤ 150 C
61 Splices Type VTS 2-step C
62 Splices Quantity VTS 1 C

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 1/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

63 Spacing Loops m VTS NAP C

64 Splice Efficiency % VTS ≥ 66.7 C
65 2,2 BELT STEEL CORD RIP DETECTION
66 Manufacturer VTS NAP C
67 Model No. VTS NAP C
68 Enclosure (NEMA/IP) VTS NAP C
Sensors System Quantity (Per NAP
69 VTS C
Equipment)
70 Location Sensors System VTS NAP C
71
72 3, PULLEYS
73 3,1 DRIVE PULLEY
74 Quantity 1 1 C
75 Manufacturer VTS PPI C
76 Original Country VTS Canada C
77 Design Type (Standard / Engineered) VTS Standard C
78 Pulley Diameter mm / inch VTS 508 C
79 Pulley Face Width mm / inch VTS 914 C
80 Shell Thickness mm VTS 9,5 C
81 Face Type (Crown or Flat) VTS Flat C
82 Lag Thickness mm VTS 20 C
83 Lag Groove Pattern VTS Herring Bone C
84 Lag Material / Hardness VTS SBR/60 Duro C
85 Shaft Material VTS 1045 C
86 Shaft Total Inertia kg*m2 VTS 0,412109375 C
87 Shaft Torsion MPa VTS 1,9 C
88 Shaft Bending MPa VTS 28,9 C
89 Shaft Deflection at Center % VTS 0,45 C
90 Shaft Diameter (in Center) mm VTS 125 C
91 Shaft Diameter (in Bearing) mm VTS 125 C
92 Shaft Center Bearing Length mm VTS 1450 C
93 Shaft Total Length mm VTS 2231,5 1
94 Shaft Weight kg VTS 211 C
95 End Disc Type VTS Profile C
96 End Disc Thickness mm VTS 38 C
97 Bearing Manufacturer VTS SKF C
98 Bearing Series VTS 22228 C
99 Bearing L10 Life Rating h VTS 80000 C
100 Pillow Block Manufacturer VTS PPI C
101 Pillow Block Type / Material / Model VTS Pillow Block/Ductile/SAF C
102 Seal Type VTS Taconite C
103 Locking Device Manufacturer VTS Fenner C
104 Locking Device Type / Model VTS B106IN415 C
105 Belt Wrap degree VTS 180 C
106 Entry Design Tension (T1) kN VTS 25.1 C
107 Leaving Design Tension (T2) kN VTS 13.2 C
108 Entry Design Starting Load kN VTS 38 C
109 Leaving Design Starting Load kN VTS 14 C
110 Complete Pulley Weight kg VTS 430 C
111 3,2 HIGH TENSION PULLEY
112 Quantity VTS NAP C
113 Manufacturer VTS NAP C
114 Original Country VTS NAP C
115 Design Type (Standard / Engineered) VTS NAP C
116 Pulley Diameter mm VTS NAP C
117 Pulley Face Width mm VTS NAP C
118 Shell Thickness mm VTS NAP C
119 Face Type (Crown or Flat) VTS NAP C
120 Lag Thickness mm VTS NAP C
121 Lag Groove Pattern VTS NAP C
122 Lag Material / Hardness VTS NAP C
123 Shaft Material VTS NAP C
124 Shaft Diameter (in Center) mm VTS NAP C
125 Shaft Diameter (in Bearing) mm VTS NAP C
126 Shaft Center Bearing Length mm VTS NAP C
127 Shaft Total Length mm VTS NAP C
128 Shaft Weight kg VTS NAP C

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 2/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

129 End Disc Type VTS NAP C

130 Bearing Manufacturer VTS NAP C
131 Bearing Series VTS NAP C
132 Bearing L10 Life Rating h VTS NAP C
133 Pillow Block Manufacturer VTS NAP C
134 Pillow Block Type / Material / Model VTS NAP C
135 Seal Type VTS NAP C
136 Locking Device Manufacturer VTS NAP C
137 Locking Device Type / Model VTS NAP C
138 Belt Wrap degree VTS NAP C
139 Entry Design Tension (T1) kN VTS NAP C
140 Leaving Design Tension (T2) kN VTS NAP C
141 Entry Design Starting Load kN VTS NAP C
142 Leaving Design Starting Load kN VTS NAP C
143 Complete Pulley Weight kg VTS NAP C
144 3,3 LOW TENSION PULLEY
145 Quantity VTS 3 C
146 Manufacturer VTS PPI C
147 Original Country VTS Canada C
148 Design Type (Standard / Engineered) VTS Standard C
149 Pulley Diameter mm VTS 406 C
150 Pulley Face Width mm VTS 914 C
151 Shell Thickness mm VTS 9,5 C
152 Face Type (Crown or Flat) VTS Flat C
153 Lag Thickness mm VTS 13 C
154 Lag Groove Pattern VTS Plain C
155 Lag Material / Hardness VTS SBR/60 Duro C
156 Shaft Material VTS 1045 C
157 Shaft Diameter (in Center) mm VTS 113 C
158 Shaft Diameter (in Bearing) mm VTS 87 C
159 Shaft Center Bearing Length mm VTS 1350 C
160 Shaft Total Length mm VTS 1445 C
161 Shaft Weight kg VTS 93 C
162 End Disc Type VTS Profile C
163 Bearing Manufacturer VTS SKF C
164 Bearing Series VTS 22220 C
165 Bearing L10 Life Rating h VTS 80000 C
166 Pillow Block Manufacturer VTS PPI C
167 Pillow Block Type / Material / Model VTS Pillow Block/Ductile/SAF C
168 Seal Type VTS Taconite C
169 Locking Device Manufacturer VTS Fenner C
170 Locking Device Type / Model VTS B106IN315 C
171 Belt Wrap degree VTS 180 C
172 Entry Design Tension (T1) kN VTS 13.2 C
173 Leaving Design Tension (T2) kN VTS 13.2 C
174 Entry Design Starting Load kN VTS 13.5 C
175 Leaving Design Starting Load kN VTS 13.5 C
176 Complete Pulley Weight kg VTS 302 C
177 3,4 TAIL PULLEYS
178 Pulleys Description VTS Pro-Duty C
179 Quantity VTS 1 C
180 Manufacturer VTS PPI C
181 Original Country VTS Canada C
182 Design Type (Standard / Engineered) VTS Standard C
183 Pulley Diameter mm VTS 406 C
184 Pulley Face Width mm VTS 914 C
185 Shell Thickness mm VTS 9,5 C
186 Face Type (Crown or Flat) VTS Flat C
187 Lag Thickness mm VTS 13 C
188 Lag Groove Pattern VTS Plain C
189 Lag Material / Hardness VTS SBR/60 Duro C
190 Shaft Material VTS 1045 C
191 Shaft Diameter (in Center) mm VTS 113 C
192 Shaft Diameter (in Bearing) mm VTS 87 C
193 Shaft Center Bearing Length mm VTS 1350 C
194 Shaft Total Length mm VTS 1672 C
195 Shaft Weight kg VTS 112 C

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 3/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

196 End Disc Type VTS Profile C

197 Bearing Manufacturer VTS SKF C
198 Bearing Series VTS 22220 C
199 Bearing L10 Life Rating h VTS 80000 C
200 Bearing L10 Life Rating h VTS PPI C
201 Pillow Block Manufacturer VTS Pillow Block/Ductile/SAF C
202 Pillow Block Type / Material / Model VTS Taconite C
203 Seal Type VTS Fenner C
204 Locking Device Manufacturer VTS B106IN315 C
205 Locking Device Type / Model VTS 180 C
206 Belt Wrap degree VTS 13.2 C
207 Entry Design Tension (T1) kN VTS 13.2 C
208 Leaving Design Tension (T2) kN VTS 13.5 C
209 Entry Design Starting Load kN VTS 13.5 C
210 Leaving Design Starting Load kN VTS 13,5 C
211 Complete Pulley Weight kg VTS 322 C
212
213 4, IDLERS
214 4,1 CARRYING IDLERS
215 Quantity VTS 132 C
216 Manufacturer / Model VTS LOR-FLS-IDL-3002 C
217 Original Country VTS RSA C
218 CEMA Series VTS C5 C
219 Roll Diameter mm VTS 127 C
220 Troughing angle degree VTS 35 C
221 Number of Rolls VTS 3 C
222 Load Rating kN VTS 4 kN C
223 Bearing Type VTS Deepgroove Ball bearing greased and sealed for life. C
224 Bearing Size VTS 6205 C
Bearing L10 Life Rating (Under Load >60000
225 h VTS C
Design and Speed)
226 Seal Type VTS 2RS C
227 Lubrication Type VTS Greased and sealed for life. C
Maximum Recommended Idler
228 mm VTS 1000 1
Spacing
229 Total Weight of Idler kg VTS 29 Kg C
230 4,2 IMPACT IDLERS
231 Quantity VTS 12 C
232 Manufacturer / Model VTS LOR-FLS-IDL-3003 C
233 Original Country VTS RSA C
234 CEMA Series VTS C5 C
235 Roll Diameter mm VTS 133 C
236 Troughing angle degree VTS 35 C
237 Number of Rolls VTS 3 C
238 Load Rating kN VTS 4 kN C
239 Bearing Type VTS Deepgroove Ball bearing greased and sealed for life. C
240 Bearing Size VTS 6205 C
Bearing L10 Life Rating (Under Load
241 h VTS >60000 C
Design and Speed)
242 Seal Type VTS 2RS C
243 Lubrication Type VTS Greased and sealed for life. C
Maximum Recommended Idler
244 mm VTS 1000 C
Spacing
245 Total Weight of Idler kg VTS 46,6 Kg C
246 4,3 RETURN IDLERS
247 Idler Description VTS Flat Rubber Idler C
248 Quantity VTS 45 C
249 Manufacturer / Model VTS LOR-FLS-IDL-3006 C
250 Original Country VTS RSA C
251 CEMA Series VTS C5 C
252 Roll Diameter mm VTS 133 C
253 Troughing angle degree VTS 0 C
254 Number of Rolls VTS 1 C
255 Load Rating kN VTS 1,1 kN C
256 Bearing Type VTS Deepgroove Ball bearing greased and sealed for life. C
257 Bearing Size VTS 6205 C

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 4/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

Bearing L10 Life Rating (Under Load

258 h VTS >60000 C
Design and Speed)
259 Seal Type VTS 2RS C
260 Lubrication Type VTS Greased and sealed for life. C
Maximum Recommended Idler 3000
261 mm VTS C
Spacing
262 Total Weight of Idler kg VTS 27 Kg C
263 4,4 CARRYING TRAINING IDLERS
264 Quantity VTS 7 C
265 Manufacturer VTS LOR-FLS-IDL-3004 C
266 Original Country VTS RSA C
267 CEMA Series VTS C5 C
268 Roll Diameter mm VTS 127 C
269 Troughing angle degree VTS 35 C
270 Number of Rolls VTS 3 C
271 Shaft Diameter mm VTS 25 C
272 Shaft Deflection mm VTS ≤7 minutes deflection at bearings C
273 Load Rating kN VTS 4 C
274 Bearing Type VTS Deepgroove Ball bearing greased and sealed for life. C
275 Bearing Size VTS 6205 C
Bearing L10 Life Rating (Under Load
276 h VTS >60000 C
Design and Speed)
277 Seal Type VTS 2RS C
278 Lubrication Type VTS Greased and sealed for life. C
Maximum Recommended Idler
279 mm VTS 1000 C
Spacing
280 Total Weight of Idler kg VTS 53 Kg C
281 4,5 TRANSITION IDLERS
282 Quantity VTS 4 C
283 Manufacturer VTS LOR-FLS-IDL-3005 C
284 Original Country VTS RSA C
285 CEMA Series VTS C5 C
286 Roll Diameter mm VTS 127 C
287 Troughing angle degree VTS 35 C
288 Number of Rolls VTS 3 C
289 Load Rating kN VTS 4.5kN C
290 Bearing Type VTS Deepgroove Ball bearing greased and sealed for life. C
291 Bearing Size VTS 6205 C
Bearing L10 Life Rating (Under Load
292 h VTS >60000 C
Design and Speed)
293 Seal Type VTS 2RS C
294 Lubrication Type VTS Greased and sealed for life. C
Maximum Recommended Idler
295 mm VTS 1000 C
Spacing
296 Total Weight of Idler kg VTS 33 Kg C
297 4,6 RUBBER DISC RETURN IDLERS (V TYPE)
298 Type / Describe VTS NAP C
299 Quantity VTS NAP C
300 Manufacturer VTS NAP C
301 Original Country VTS NAP C
302 CEMA Series VTS NAP C
303 Roll Diameter mm VTS NAP C
304 Troughing angle degree VTS NAP C
305 Number of Rolls VTS NAP C
306 Load Rating kN VTS NAP C
307 Bearing Type VTS NAP C
308 Bearing Size VTS NAP C
Bearing L10 Life Rating (Under Load
309 h VTS NAP C
Design and Speed)
310 Seal Type VTS NAP C
311 Lubrication Type VTS NAP C
Maximum Recommended Idler
312 mm VTS NAP C
Spacing
313 Total Weight of Idler kg VTS NAP C
314 4,7 BELT SCALE IDLER C
315 Precision +/- % No NAP C
316 Quantity No NAP C

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 5/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

317 Manufacturer No NAP C

318 Original Country No NAP C
319 CEMA Series No NAP C
320 Roll Diameter mm No NAP C
321 Troughing angle degree No NAP C
322 Number of Rolls No NAP C
323 Load Rating kN No NAP C
324 Bearing Type No NAP C
325 Bearing Size No NAP C
Bearing L10 Life Rating (Under Load
326 h No NAP C
Design and Speed)
327 Seal Type No NAP C
328 Lubrication Type No NAP C
Maximum Recommended Idler
329 mm No NAP C
Spacing
330 Total Weight of Idler kg No NAP C
331
332 5, REDUCERS, COUPLINGS, BACKSTOPS AND BRAKES
333 5,1 REDUCER
334 Manufacturer VTS Flender 0
335 Original Country VTS Germany 0
336 Type VTS Bevel 0
337 Model No. VTS B3DH05 0
338 Input Speed rpm VTS 1495 0
339 Output Speed rpm VTS 53,62 0
340 Reduction, i : VTS 27,881 0
341 Nameplate Power kW VTS 37 0
342 Reducer Mechanical Rating kW VTS 65 0
343 Mechanical Service Factor VTS 1,757 0
344 Reducer Thermal Rating kW VTS 93,3 0
345 AGMA durability rating VTS >1,5 0
346 AGMA strength rating VTS >1,5 0
347 Cooling Type VTS Fan 0
348 Shaft Seal Type VTS Taconite 0
349 Drive Base (yes/no) VTS Yes 0
350 Weight kg VTS 325 0
Including 4...20mA integrated
351 RTD transmitters, embedded in the same yes (1) 0
enclosure, Protection: NEMA 4 / IP65
352 Vibration transmitters 4...20 mA, Protection: NEMA 4/IP65 yes (1) 0
353 Quantity (per equipment) VTS 1 0
354 Filter Type VTS Offshore 0
355 5,2 HIGH SPEED COUPLING
356 Manufacturer VTS Flender 0
357 Original Country VTS Germany 0
358 Type VTS Fluid coupling 0
359 Model No. VTS Fludex FND 370 0
360 Motor Rating Torque kN*m VTS NAP 0
361 Coupling Rating Torque kN*m VTS NAP 0
362 Safety Factor VTS NAP 0
363 Quantity (per equipment) VTS 1 0
364 5,3 LOW SPEED COUPLING
365 Manufacturer VTS NAP 0
366 Original Country VTS NAP 0
367 Type VTS NAP 0
368 Model No. VTS NAP 0
369 Torque in Low Speed Shaft kN*m VTS NAP 0
370 Coupling Rating Torque kN*m VTS NAP 0
371 Safety Factor VTS NAP 0
372 Quantity (per equipment) VTS NAP 0
373 5,4 BACKSTOP
374 Manufacturer VTS Ringspann 0
375 Original Country VTS Germany 0
376 Type VTS Internal 0
377 Model No. VTS NAP 0
378 Shaft Location VTS NAP 0
379 Torque Required kN*m VTS NAP 0

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 6/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

380 Backstop Rating Torque kN*m VTS NAP 0

381 Safety Factor VTS NAP 0
382 Weight / unit kg VTS NAP 0
383 Location VTS intermediate shaft 0
384 Quantity (per equipment) VTS 1 0
385 5,5 BREAK
386 Manufacturer VTS NAP 0
387 Type VTS NAP 0
388 Model No. VTS NAP 0
389 Torque required (normal stopping) kN*m VTS NAP 0
390 Normal stopping time s VTS NAP 0
391 Torque required emergency case kN*m VTS NAP 0
Stopping time with electric shut down NAP
392 s VTS 0
or emergency
393 Break rating kN*m VTS NAP 0
394 Safety factor VTS NAP 0
395 Location pulley VTS NAP 0
396 Shaft location (high / low speed) VTS NAP 0
397 Hydraulic unit included (Yes / No) VTS NAP 0
398 Power consumption hydraulic unit kW VTS NAP 0
399 Caliper number (per break) VTS NAP 0
400 Brake pads material VTS NAP 0
401 Working pressure kPa VTS NAP 0
NAP
402 Emergency backup breaking (Yes / No) VTS 0
403 Disc diameter mm VTS NAP 0
404 Break Inertia kg*cm2 VTS NAP 0
405 Weight kg VTS NAP 0
406 Quantity (per equipment) VTS NAP 0
407
408 6, CLEANERS
409 6,1 PRIMARY HEAD CLEANER
410 Manufacturer / Original Country VTS MARTIN / BRAZIL C
411 Cleaner type VTS QCM030N1MDI0A0A C
412 Hardness SHORE VTS 90 C
413 Blade material VTS POLIURETHANE C
414 Weight of unit kg VTS 60kg C
415 Quantity (per equipment) VTS 1 C
416 6,2 SECONDARY HEAD CLEANER C
417 Manufacturer VTS MARTIN / BRAZIL C
418 Hardness SHORE VTS TUNGSTEN C
419 Cleaner type VTS L1S030N1LAT0A0A C
420 Blade material VTS RUBBER / STEEL WITH TUNGSTEN INSERT C
421 Weight of unit kg VTS 24kg C
422 Quantity (per equipment) VTS 1 C
423 6,3 RETURN BELT PLOW C
424 Manufacturer VTS MARTIN C
425 Original Country VTS BRAZIL C
426 Return plow type VTS V-plow C
427 Hardness SHORE VTS 90 C
428 Blade material VTS POLIURETHANE C
429 Weight of unit kg VTS 36kg C
430 Quantity (per equipment) VTS 2 C
431
432 7, BELT SCALE
433 Manufacturer No NAP C
434 Original Country No NAP C
435 Model No. No NAP C
436 Nº of weighing idlers (on the scale) No NAP C
Nº of weighing idlers (before an after
437 No NAP C
the scale)
438 Weighing span kg No NAP C
439 Clearance requirements before scale m No NAP C
440 Clearance requirements after scale m No NAP C
441 Total N° weighing idlers No NAP C
442 Total belt scale wide m No NAP C
443 Total belt scale length m No NAP C

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 7/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

444 Weighbridge construction (indicate) No NAP C

445 Weighbridge mounting No NAP C
446 Total weight kg No NAP C
447 Accuracy % No NAP C
448 Load Cell Quantity No NAP C
449 Enclosure No NAP C
450 Display (Yes / No) No NAP C
451 Communication Type Profibus DP NAP C
Chain Calibration with winch for
452 No NAP C
extending and retracting (required)
453 Chain Structure Support No NAP C
454 Belt Scale Support (Yes / No) No NAP C
Vac / Hz /
455 Power requirements 120 / 50 / 1 NAP C
phase
456
457 8, TAKE-UP AND WINCH
458 Type VTS NAP C
459 Describe Take-Up Operation VTS NAP C
460 Location See sketch NAP C
461 Vertical / Horizontal VTS NAP C
462 Take-Up Start-Up Belt Tension kN VTS NAP C
463 Take-Up Running Belt Tension kN VTS NAP C
464 Capacity kg VTS NAP C
465 Travel mm VTS NAP C
Number of Pulling Ropes at Take-Up
466 VTS NAP C
Trolley
Safety Grabs / Shock Absorbers,
467 VTS NAP C
describe
468 Type / Size of Rope and Sheaves VTS NAP C
469 Qty Sheave VTS NAP C
470 8,1 WINCH FOR RELIEF COUNTERWEIGHT
471 Winch Type / Size VTS NAP C
472 Manufacturer VTS NAP C
473 Model No. VTS NAP C
474 Winch Drive, describe VTS NAP C
475 Motor Power kW VTS NAP C
476 Tension kN VTS NAP C
477 Winch Maximum Pulley Force kN VTS NAP C
478 Drum Diameter mm VTS NAP C
479 Drum Face ( Grooved / plain) VTS NAP C
480 Drum Speed rpm VTS NAP C
481 Drum Active Capacity m VTS NAP C
482
483 9, INSTRUMENTATION DATA
484 9,1 PERMANENT SPLICE MONITORING SYSTEM
485 Manufacturer VTS NAP C
486 Accuracy % VTS NAP C
487 List Components VTS NAP C
488 Enclosure VTS NAP C
489 Transmitter Output VTS NAP C
490 9,2 PULLEYS TEMPERATURE TRANSMITTER
491 Manufacturer VTS Valax C
492 Type VTS Platinum - 3 wire (with oil seal) C
493 Model No. VTS VALAX-RTD-VX31849 C
494 Enclosure NEMA 4 / IP65 NEMA 4 / IP65 C
495 Quantity (per equipment) VTS 1 1
4-20mA integrated transmitters, 4-20mA integrated transmitters, embedded in the
496 Other C
embedded in the same enclosure same enclosure
Accessories and mounting support
497 Accessories and mounting support included C
included
498 9,3 PULLEYS VIBRATION TRANSMITTER
499 Manufacturer VTS TE Conectivity 1
500 Type VTS ± 5 g to ± 50 g Dynamic Range 1
501 Model No. VTS 801 X - AR/-AP 1
502 Enclosure NEMA 4 / IP65 NEMA 4 / IP65 C
503 Quantity (per equipment) VTS 1 1

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 8/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

Vac / Hz /
504 Power requirements 120 / 50 / 1 10 - 30 Vdc 1
phase
505 Output type Dry Contact 2xSPDT 4 to 20 mA 1
506 Contact Rate Vac @ A 120 @ 2 20 mA @ 12 V 1
Accessories and mounting support
507 Other Accessories and mounting support included C
included
508
509 10, MAINTENANCE HOIST
510 10,1 GENERAL
511 Item VTS 1
512 Equipment Name VTS Electric Hoist
513 Equipment Tag VTS 2290-CH-252
514 Supplier VTS 1
515 Manufacturer VTS 1
516 Model No. VTS 1
517 Capacity kg VTS 2000
518 Height of Lift m VTS 20.2 1
519 10,2 HOIST
520 Model No. VTS 1
521 Capacity kg VTS 2000
522 Control Type VTS 1
523 Hoist Service Classification VTS 1
524 Headroom Min (HMin) m VTS 1
525 Lift Height (HLift) m VTS 20.2

526 Operation Height (HOp) m VTS 20.2

527 Lift Speed (Low/High) m/min VTS 1
528 Electric Motor VTS 1
529 Motor Model VTS 1
530 Motor Manufacturer VTS 1
531 Motor Power kW VTS 1
532 Motor Voltage/Current/Frecuency V/A/Hz VTS 1
533 Service Factor (FS) VTS 1
534 Reducer Manufacturer VTS 1
535 Reducer type VTS 1
536 Thermal Power kW VTS 1
537 Brake Type VTS 1
538 Brake capacity % VTS 1
539 Chain VTS 1
540 Chain Type or Grade VTS 1
541 Chain size (diameter) mm VTS 1
542 Chain Material VTS 1
543 Cable Safety Factor m VTS 1
544 Chain total lenght VTS 1
545 Cable VTS 1
546 Cable Diameter mm VTS 1
547 Cable Material VTS 1
548 Cable Safety Factor VTS 1
549 Cable total lenght m VTS 1
550 Drum Diameter mm VTS 1
551 Drum Material VTS 1
552 Load Hook material VTS 1
553 Housing material VTS 1
554 Hoist Weight (w/o motor) kg VTS 1
555 Hoist Motor Weight kg VTS 1
556 10,3 MONORAIL TROLLEY
557 Model No. VTS NAP C
558 Travel Length m VTS NAP C
559 Minimum curve radio mm VTS NAP C
560 Travel velocity (Low/High) m/min VTS NAP C
561 Electric Motor VTS NAP C
562 Motor Model VTS NAP C
563 Motor Manufacturer VTS NAP C
564 Motor Power kW VTS NAP C
565 Motor Voltage/Current/Frecuency V/A/Hz VTS NAP C
566 Motor Torque VTS NAP C
567 Service Factor (FS) VTS NAP C

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 9/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

568 Monorail Beam Dimensions mm VTS NAP C

569 Brake type VTS NAP C
570 Brake capacity % VTS NAP C
571 Housing Material VTS NAP C
572 Wheels Quantity Qty VTS NAP C
573 Wheels Hardness BHN VTS NAP C
574 Wheels loading kN VTS NAP C
575 Trolley Weight (w/o motor) kg VTS NAP C
576 Trolley Motor Weight kg VTS NAP C
577 10,4 PUSHBUTTON
578 Control Type (pendant / remote) VTS 1
579 Manufacturer VTS 1
580 Length Pendant m VTS 1
581 Enclosure Type VTS 1
582 10,5 INFORMATION FOR ERECTION AND MAINTENANCE
583 Shipping Information: VTS 1
584 Total Shipping Weight kg VTS NAP
585 Total Shipping Volume m3 VTS NAP
586 Erection Information: VTS 1
Weight and Identification of Heaviest
587 kg VTS 1
Piece
Dimension and Identification of Largest
588 mm VTS 1
Piece
589 Clearences: VTS 1
590 - Vertical m VTS 1
591 - Sides m VTS 1
592 - Bottom m VTS 1
593 Maintenance Information: VTS 1
Weight and Identification of Heaviest
594 kg VTS 1
Piece
Dimension and Identification of Largest
595 mm VTS 1
Piece
596 Clearences: VTS 1
597 - Vertical m VTS 1
598 - Sides m VTS 1
599 - Bottom m VTS 1
600
601 11, PLATEWORK & OTHERS
602 11,1 FEED SKIRTS
603 Length m VTS 7.35 C
604 Plate Material VTS ASTM 36 C
605 Plate Thickness mm VTS 10 C
606 Liner Material VTS UHMW C
607 Liner Thickness mm VTS 12 C
608 Liner Weight, aprox kg VTS 18 0
609 Seal Type VTS RUBBBER 0
610 Total Skirt Weight, aprox kg VTS 806 0
611 11,2 HEAD CHUTE
612 Plate Material VTS ASTM 36 C
613 Plate Thickness mm VTS 10 C
614 Liner Material VTS UHMW C
615 Liner Thickness mm VTS 12 C
616 Liner Weight, aprox kg VTS 154 0
617 Inspection Door Manufacturer VTS IMCO 0
618 Total Head Chute Weight kg VTS 1518 0
619 Tramp Iron Magnet Operation Yes / No VTS No C
620 Rock Box Yes / No VTS No C
621 Lifting Lugs Yes / No VTS YES 0
622 11,3 STEEL SUPPORT
623 Grating Type VTS Gratings for tower & Chequered plate for conveyor 1
2
624 Grating Weight kg/m VTS 30 for grating/ 50 for chequred plate 1
625 Stringers kg VTS 1208 0
Truss, With Walkway, Grating and
626 kg VTS NAP C
Handrail
627 Bents kg VTS 1822 1
628 Take-up Tower kg VTS 22051 1

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 10/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

629 Gravity Take-Up kg VTS 1666 0

630 Head and Tail Pulley Frames kg VTS NAP C
Transfer Tower, W / Walkway, Stairs,
631 kg VTS NAP C
Handrail, etc.
632 Other kg VTS NAP C
Total Platework Weight (Without Chute
633 kg VTS NAP C
and Skirtboard)
634 Total Liners Weight kg VTS NAP C
635 11,4 WIND HOOD
636 Manufacturer No CAPOTEX 0
637 Type No MADRID CLASSIC COVER 0
638 Material No GALVANIZED STEEL 0
639 Length m No 46,8 0
640 Thickness mm No 0.6/1.2 0
641 Access side 1 or 2 No 2
642
643 12, MECHANICAL COMPONENTS WEIGHT
644 Weight:
645 Belting kg VTS 1987 0
646 Pulleys kg VTS 3566 0
647 Idlers kg VTS 6105.2 Kg C
648 Reducer/s kg VTS 325 0
649 Motor/s kg VTS 409 0
650 Coupling/s kg VTS 72 0
651 Backstop kg VTS Internal to gearbox 0
652 Cleaner kg VTS 156 C
653 Belt Scale kg VTS NAP 0
654 Belt Hood (wind cover) kg VTS 670 0
655
656 13, STRUCTURAL DATA
657 13,1 CONVEYOR STEEL WORK
658 Stringer kg VTS 3955 0
659 Srtinger lenght m VTS 54 0
660 Trusses With Walkways and Handrails kg VTS NAP C
661 Trusses Length m VTS NAP C
662 Walkway Dimension mm x mm VTS 750 X 900 1
663 Bents kg VTS 1822 1
664 Bents Length m VTS NAP C
665 Drive Station kg VTS 1005 1
666 Take Up Tower kg VTS 22051 1
667 Pulley Head Frame kg VTS 624 0
668 Transfer Tower kg VTS NAP C
669 Road Protection kg VTS NAP 0
670 Supports for All Instruments kg VTS 77,2 1
671 C-Frame kg VTS NAP C
672 Especial Tools kg VTS NAP 0
673 Others, Describe Protection for Road Cross NAP 0
674 Quantity (per Equipment) VTS NAP 0
675 13,2 PAINT
See Technical Specification Painting G0- See Technical Specification Painting G0-2000-ST-
676 Specification:
2000-ST-SPE-0002 SPE-0002
677 Description System (Internal / External) VTS 1
678 Cleaning Surface Preparation VTS 1
679 Prime Coat: VTS 1
680 Material VTS 1
681 Minimum Thickness µm VTS 1
682 Finish Coat: VTS 1
683 Material VTS 1
684 Minimum Thickness µm VTS 1
685 Minimum Thickness µm VTS 1
686
687 14, WEIGHT SUMMARY
688 Total Mechanical Weight kg VTS 4785 1
689 Total Plates Weight kg VTS NAP C
690 Total Liners Weight kg VTS NAP C

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 11/12
Project : Spence Growth Option Project, Filter Plant Conveyor System. Client Doc. No. : 4-V2-2290-ME-DAS-182002 Rev. 1
Project No. :48254-FLS-2290-ME-DAS-001 FLS Doc. No. : 48254-FLS-2290-ME-DAS-002 Rev. 1
DATASHEET OF CONVEYOR 2290-CV-252

DATA SHEET B1
INFORMATION TO BE COMPLETED BY SELLER

CLIENT: MINERA SPENCE S.A. - BHP BILLITON

PROJECT: SPENCE GROWTH OPTION (SGO) PROJECT
EQUIPMENT TECHNICAL SPEC: Transfer belt conveyor
TAG EQUIPMENT Nº: 2290-CV-252

DESCRIPTION UNIT SPECIFIED BY CLIENT OFFERED BY FLSMIDTH REV

691 Total Structural Weight kg VTS 63837 1

692 Total Weight kg VTS 68622 1
693 Total Conveyor Weight kg VTS NAP C
694 Total Shipping Weight kg VTS NAP C
695 Shipping Volume (Total) m3 VTS NAP C
696
697 15, HEAVIEST PIECES
698 15,1 ERECTION
699 Component VTS 2290-EQ-728 0
700 Weight kg VTS 14812 0
701 Size (H x L x W) mxmxm VTS 7.2x5.8x7.3 0
702 15,2 MAINTENANCE
703 Component VTS Drive 0
704 Weight kg VTS 1005 0
705 Size (H x L x W) approx mxmxm VTS 1.5 x 2.3 x .51 0

The information transmitted by this document is the proprietary and confidential property of FLSmidth and
may not be duplicated, disclosed or utilized without written consent from FLSmidth. 12/12