The Pump Pros: Pumpen
The Pump Pros: Pumpen
The Pump Pros: Pumpen
T.I.P .
Submersible pumps Garden pumps Submersible pressure pumps Deep-well pumps Booster sets Petrol-engine pumps Special pumps
www.tip-pumpen.de
T.I.P.
TECHNIK + KOMPETENZ
Dear customer,
we are pleased to present you our new catalogue on pump and irrigation technology. This new edition, too, contains all you have to know including useful tips around the topics of drainage and irrigation as well as domestic water supply. Our comprehensive product range and our more than 30 years of experience in the development of high-quality pumps will permit you to find the product tailored to your specific needs. In our specialised separate catalogue you will find a large selection of products around your pond.
Our company, specialised in the manufacture and distribution of water pumps and pond filters, was founded in 1978. When selecting the product range, quality had absolute priority from the onset. The excellent price/performance ratio of our products quickly yielded positive results. In Germany, for instance, T.I.P. has been counting for years among the leading suppliers of pumps for private use in the house, yard and garden. Meanwhile, we are also very successful in distributing our products on a Europe-wide basis and in some non-European countries.
The success and high quality of our range of products are owing to the incessant further development of our products in line with the latest state in technological expertise. This is escorted by a consistent implementation of top-quality requirements in the selection of the materials and in the planning of production flows. This approach has resulted in convincing, powerful high-quality pumps with a low energy consumption. Moreover, our focus in the development of products is on a rigorously responsible use of water as a resource which becomes more and more scarce and valuable. Saving water and the sensible use of grey, brown and rainwater instead of drinking water will not only decrease your household costs, it also means an active contribution to environmental protection. The safety topic, too, plays a major role in the development of our products. This means, for instance, that all our pumps bear the GS mark (Geprfte Sicherheit = Tested for safety).
At www.tip-pumpen.de you will find a comprehensive and neatly organised internet presence where the main focus is on the benefit for our customers. Detailed information about products and accessories will permit you to take a deep insight in our product range. Moreover, informational product sheets are ready for being printed out. Any required spare parts can be selected and ordered quickly in our online shop. Within a regular updating process, we introduce new products, describe innovative technologies and publish valuable tips so that dropping by at our internet presence is always worthwhile.
As a special service, we offer you a hotline regarding technical questions. Our specialised staff are ready to advise you in questions regarding installation, maintenance or similar matters. You can reach our technicians Monday through Friday from 15.00 to 17.00 oclock on 0049-(0)7263-912582 and 0049-(0)7263-912583. Please note: This service hotline is not in charge of matters regarding spare parts and repair, these are under the responsibility of a separate department.
Our products come up to high standards in terms of quality and reliability. Nevertheless, they are subject to natural wear and tear which entails the necessity for spare parts. In this regard we may proudly mention our quite unusual offer which is highly appreciated by our customers: We guarantee 10 years of availability for our spare parts. You wont have any problems finding spare parts for any products up to an age of 10 years, calculated from the day of the products purchase. If any repair work or spare parts should become necessary, please contact us by post, fax or e-mail. The corresponding addresses can be found on page 35. Our internet presence at www.tip-pumpen.de offers you the fastest and most convenient way of ordering spare parts. In the spareparts shop you will find explosion drawings and part lists of our products so that it takes just a few clicks to locate and order any part you may need. We wish you a lot of fun and inspiration when browsing through our catalogue.
Inhalt
Pumpen
T.I.P .
Irrigation
Rain-water pump Submersible pressure pumps Deep-well pumps Garden pumps Automatic booster sets Automation
P. 10 - 19
Special pumps
Petrol-engine driven water pumps Peripheral pump P. 28 - 30
Accessories
for submersible pumps for surface pumps P. 31 - 34
Contact
Contact P. 35
www.tip-pumpen.de
3
T.I.P.
TECHNIK + KOMPETENZ
Drainage
Submersible clean-water pumps are suitable for pumping down or transferring pure or moderately contaminated liquids. Typical applications include the discharge of household waste water, rain or seepage water as well as the evacuation of basins. One of the very particular features of submersible clean-water pumps is their shallow-suction capability which leaves surfaces ready to be wiped off. A pressure as low as 0.5 bar will be sufficient for the operation of a garden shower.
Submersible drainage pumps are especially designed for use in narrow drainage shafts owing to their compact design, the vertical pump outlet and the suspension cable. This type of pump is equipped with an integrated float switch which gives you the choice between automatic or manual operation.
Shallow-suction units enable drainage down to surfaces ready for being wiped off since evacuation is possible down to a particularly low water level of just a few millimetres. The technical details of the pumps always specify the minimum evacuation level. This value indicates the lowest water level possible down to which liquids can be pumped off.
ON
AUTO ON
Proven technology
Pump housing depending on the design, made of plastic, high-grade steel or cast metal Float switch - automatic cut-in/cut-out as a function of the water level Motor - protected from overload by a thermoprotector Mains cable - 10 metres
F OF
AUTO OFF
The float switch fulfils two important functions: On the one side, it will cut the pump in or out as a function of the water level, thus enabling the pump to be operated automatically. On the other, it protects the pump from damage caused by overheating resulting from operation in the absence of water, since it will cause the pump to cut out as soon as a specific fluid level is fallen short of.
Pump impeller - low-wearing design with a long life cycle Horizontal pump outlet - large dimension to ensure unrestricted passage of liquid
www.tip-pumpen.de
4
Submersible pumps
TECHNIK + KOMPETENZ
T.I.P.
INTEGRA 440 FS
TKV 8000
TKX 8000
TKX 12000
Special design with shallow- Special design with shallow- Very reliable starter unit in Powerful, highly efficient unit suction capability for narrow suction capability for narrow conventional design in conventional design shafts from 20 cm shafts, wells etc. Optimally suited for all typical Optimally suited for all typical Vertical pump outlet Vertical pump outlet tasks of submersible clear tasks of submersible clear Integrated float switch water pumps water pumps Comes with a lowering rope
Max. flow rate Max. delivery height / pressure Nominal performance Max. submersion depth Pressure port Min. evacuation level Max. grain size Item number
8.500 l/h 7 m / 0,7 bar 300 Watt 5m 41,91 mm (1 1/4 MT) 3 mm 5 mm 30112
7.800 l/h 6 m / 0,6 bar 300 Watt 5m 41,91 mm (1 1/4 MT) 10 mm 5 mm 30250
7.800 l/h 6 m / 0,6 bar 300 Watt 7m 41,91 mm (1 1/4 MT) 20 mm 6 mm 30251
12.000 l/h 7 m / 0,7 bar 400 Watt 7m 41,91 mm (1 1/4 MT) 20 mm 6 mm 30252
950 l/h 2.500 l/h 3.900 l/h 4.950 l/h 6.200 l/h 7.300 l/h
2.580 l/h 3.660 l/h 4.500 l/h 5.700 l/h 6.780 l/h
1.500 l/h 2.800 l/h 4.500 l/h 6.000 l/h 7.100 l/h
1.650 l/h 3.300 l/h 5.000 l/h 7.600 l/h 9.600 l/h 11.000 l/h
www.tip-pumpen.de
5
T.I.P.
TECHNIK + KOMPETENZ
Drainage
Submersible dirty-water pumps were developed for draining or transferring heavily contaminated liquids. These units will take in and convey leaves and other plant residues, coarse particles and fibrous matters without any problems. Therefore, they are optimally suited for draining garden ponds, pools, constructionsites and dirty-water pits.
With regard to emergency drainage of flooded premises, submersible dirty-water pumps are indispensable for rapid pumping off to minimise water damage. In these cases, the water mostly contains coarse particles. The max. grain size referred to in the technical data specifies the max. diameter of the contaminating elements which the liquid being discharged is allowed to contain.
With its particularly high-quality technology, the EXTREMA 300/10 is an absolute top-class pump. The housing which is completely made of high-grade steel, the water-cooled motor and the high-precision ball bearings allow a performance level complying with very high standards. As a particular feature, it is possible to pump somewhat hot liquids up to 50 C temporarily even up to 95 C. Submersible dirty-water pumps are used to carry water which contains contaminants of various sizes. However, floating particles, sludge, sand, leaves, other plant residues and similar particles may interfere with the pumps proper operation or even stop it. The VORTEX free-flow wheel efficiently prevents clogging of the pump since it swirls and shreds the contaminants to make them pass freely through the hydraulic system. This technology has proven in practice for years in the evacuation of ponds and construction pits, but also for emergency drainage when everything has to be done very fast, although larger particles may be contained in the water and the pumps have to work at a maximum degree of efficiency and reliability.
The great variety of applications of submersible dirty-water pumps is reflected in a carefully balanced range of products. This means, for instance, that the TVX series includes conventional designs for all common applications. In addition thereto, the DTX series is suitable for continuous operation. The top-quality Maxima series was developed for areas of use requiring extraordinarily strong, durable material.
www.tip-pumpen.de
6
Submersible pumps
TECHNIK + KOMPETENZ
T.I.P.
TVX 8000
TVX 12000
TVX 15000
TPT 20
Max. flow rate Max. delivery height / pressure Nominal performance Max. submersion depth Pressure port Min. evacuation level Max. grain size Item number
Ideal, very reliable starter unit Powerful, highly efficient Particularly powerful, highly Versatile support system for all submersible pumps, in conventional design unit in conventional design efficient unit in conventional submersible pressure and Optimally suited for all typical Optimally suited for all typical design tasks of submersible dirtytasks of submersible dirty For speedy drainage of water deep-well pumps Increased installation verwater pumps water pumps containing exceptionally satility owing to horizontal or coarse contamination upright positioning of the 7.800 l/h 10.800 l/h 14.200 l/h pump Increased stability and 5 m / 0,5 bar 6 m / 0,6 bar 8 m / 0,8 bar functional safety of the pump 320 Watt by installing the support 480 Watt 600 Watt system to the edges of 7m 7m 7m cisterns or wells When used as a wall support, 41,91 mm (1 1/4 MT) 41,91 mm (1 1/4MT) 41,91 mm (1 1/4 MT) the device is ideally suited as 30 mm 30 mm 37 mm a storage place for the pump e.g. in periods of frost 20 mm 20 mm 35 mm
30260
30261
30270
30947
7,0 m 5,0 m 4,0 m 3,0 m 2,0 m 1,0 m 6,0 m 5,0 m 4,0 m 3,0 m 2,0 m 1,0 m 2.000 l/h 4.300 l/h 6.500 l/h 8.300 l/h 10.500 l/h 6,0 m 5,0 m 4,0 m 3,0 m 2,0 m 1,0 m
1.800 l/h 4.200 l/h 6.000 l/h 8.200 l/h 10.000 l/h 11.300 l/h 13.200 l/h
www.tip-pumpen.de
7
Application example
8,0 m
T.I.P.
TECHNIK + KOMPETENZ
Drainage
DTX 7500
Solid starter unit Suited for continuous operation - for instance for the recirculation of water or the operation of water courses
DTX 7500 T
DTX 10000
EXTREMA 300/10
Extremely powerful unit All high-grade steel design Water-cooled motor High-precision ball bearings Suitable for use with hot liquids up to 50 C, temporarily even up to 95 C
Solid starter unit, comes Powerful, highly efficient unit with a support system for Suited for continuous horizontal installation and a operation - for instance for protection grid to prevent the recirculation of water or fish from being taken in the operation of water Suited for continuous operation courses
Max. flow rate Max. delivery height / pressure Nominal performance Max. submersion depth Pressure port Min. evacuation level Max. grain size Item number
7.500 l/h 6 m / 0,6 bar 320 Watt 7m 41,91 mm (1 1/4 MT) 25 mm 22 mm 30157
7.500 l/h 6 m / 0,6 bar 320 Watt 7m 41,91 mm (1 1/4 MT) 25 mm 22 mm 30258
9.000 l/h 6 m / 0,6 bar 480 Watt 7m 41,91 mm (1 1/4 MT) 25 mm 22 mm 30158
18.000 l/h 10 m / 1,0 bar 1.100 Watt 5m 47,80 mm (1 1/2 MT) 45 mm 40 mm 30038
10,0 m 9,0 m 8,0 m 7,0 m 6,0 m 5,0 m 4,0 m 3,0 m 2,0 m 1,0 m
1.500 l/h 3.000 l/h 4.300 l/h 6.600 l/h 8.600 l/h 10.500 l/h 12.800 l/h 14.400 l/h 16.500 l/h
www.tip-pumpen.de
8
Submersible pumps
TECHNIK + KOMPETENZ
T.I.P.
Maxima 180 SX
Versatile entry unit to the Maxima top-class series High-grade steel pump housing Very sturdy pump
Maxima 250 SX
Powerful and efficient unit High-grade steel pump housing Very sturdy pump With 2 connection pieces
Maxima 300 SX
Very powerful and efficient unit All high-grade steel design Very sturdy pump With 2 connection pieces
Maxima 400 SX
Especially designed contractors pump Pump housing in high-grade steel and cast iron For use under particularly extreme conditions With 2 connection pieces
Max. flow rate Max. delivery height / pressure Nominal performance Max. submersion depth Pressure port Min. evacuation level Max. grain size Item number
10.500 l/h 7 m / 0,7 bar 500 Watt 5m 41,91 mm (1 1/4 MT) 37 mm 25 mm 30121
14.500 l/h 8 m / 0,8 bar 600 Watt 5m 41,91 mm (1 1/4 MT) 37 mm 25 mm 30264
18.000 l/h 8 m / 0,8 bar 700 Watt 5m 47,80 mm (1 1/2 MT) 40 mm 30 mm 30116
24.000 l/h 9 m / 0,9 bar 950 Watt 5m 45,48 mm (1 1/2 FT) 40 mm 35 mm 30140
1.900 l/h 3.900 l/h 4.600 l/h 6.000 l/h 7.400 l/h 8.800 l/h
3.300 l/h 5.550 l/h 7.160 l/h 8.750 l/h 10.200 l/h 11.650 l/h 13.050 l/h
3.000 l/h 6.000 l/h 8.500 l/h 11.200 l/h 13.500 l/h 16.000 l/h 17.500 l/h
1.800 l/h 4.800 l/h 7.800 l/h 10.800 l/h 13.500 l/h 15.600 l/h 18.100 l/h 20.700 l/h
www.tip-pumpen.de
9
T.I.P.
TECHNIK + KOMPETENZ
Irrigation
Submersible pressure pumps are very powerful pumps of a specific design, meant to draw water from very deep down. The fluid lifted in this way can be transported further under a high pressure and thus be used e.g. for an irrigation system or for domestic purposes. In addition, these pumps are perfectly suited for direct irrigation out of wells, cisterns and reservoirs.
The Brio 2000-M control system enables the operation of submersible pressure pumps to be automated. In this way it is possible to use pumps for automatic water supply. This means that the liquids being discharged can be used as if tapped from the water mains. And all this with a useful side effect: The control system will also protect the pumps from damage causes by dry-running since they will stop operation in the absence of water.
The PPG 225 diaphragm pump is a submersible pressure pump which was developed especially for use in narrow shafts. With its vertical pump outlet and the enclosed lowering rope this particularly compact and efficient pump is suitable for use in openings down to a diameter of 11 cm. The reliable motor with a nominal performance of 225 W insures a delightfully low energy consumption.
The DIO 45/13 rain-water pump is the unit of choice when it comes to conveniently filling watering cans or operating connected watering shower heads with water taken from rain barrels or similar containers. A special clamp ensures the firm grip at the container edge, with three riser-pipe elements enabling the submersion depth to be adjusted. The float switch provides an efficient protection from dry-running.
www.tip-pumpen.de
10
TECHNIK + KOMPETENZ
T.I.P.
Rain-water pump
DIO 45/13
DRAIN 6000/36
PPG 225
TPT 20
Max. flow rate Max. delivery height / pressure Nominal performance Max. submersion depth Pressure port Well diameter min. Max. grain size Item number
Continuously adjustable Very powerful pump with a Energy-saving diaphragm Versatile support system for pump for emptying containers high discharge capacity pump for narrow shafts all submersible pumps, Convenient filling of watering Pump housing and motor Pump housing made of sturdy submersible pressure and deep-well pumps cans and operation of shaft made of high-grade steel die-cast aluminium watering shower heads For discharging water from For discharging water from Increased installation versatility owing to horizontal or great depth Easy to install great depth upright positioning of the 2.700 l/h 6.000 l/h 1.080 l/h pump Increased stability and 13 m / 1,3 bar 34 m / 3,4 bar 50 m / 5,0 bar functional safety of the pump by installing the support 350 Watt 950 Watt 225 Watt system to the edges of 5m 7m 5m cisterns or wells 26,44 mm (3/4 MT) 41,91 mm (1 1/4 MT) 17 mm, with out thread When used as a wall support, the device is ideally suited as 500 mm 110 mm a storage place for the pump e.g. in periods of frost 2 mm 2 mm P 2 mm
30263
30136
56000
50,0 m 45,0 m 40,0 m 30,0 m 25,0 m 20,0 m 15,0 m 10,0 m 5,0 m 1,0 m
30947
Application example
800 l/h 1.810 l/h 1.950 l/h 2.120 l/h 2.360 l/h 2.500 l/h 2.600 l/h
1.100 l/h 2.600 l/h 3.800 l/h 4.500 l/h 5.200 l/h 5.800 l/h 5.950 l/h
220 l/h 400 l/h 600 l/h 760 l/h 820 l/h 900 l/h 990 l/h 1.020 l/h 1.060 l/h
Number of sprinklers
2x 1x
www.tip-pumpen.de
11
T.I.P.
TECHNIK + KOMPETENZ
Irrigation
Deep-well pumps are specifically developed and most efficient submersible pressure pumps for use in particularly narrow shafts and in wells, cisterns and similar cavities. To facilitate the discharge of water from very deep down, the standard scope of delivery includes a long connection cable and a special rope for lowering and positioning the pumps.
Deep-well pumps excel by their outstanding technical properties, the use of top-class materials and a very high performance. Owing to their particular design, they can be used in very narrow borehole wells with diameters down to 10 cm. Their most reliable operation is guaranteed by a multistage hydraulic system and an integrated check (or non-return) valve.
The multistage hydraulic system of the deepwell pumps of the AJ 4 Plus series is equipped with floating impellers which have proven to be particularly resistant to the corrosive effect of sand up to a contents of 50 g/m. The compressed-ceramics ring in the diffuser and the graphite ring ensure a high durability in the case of operation in the absence of water.
Very powerful and particularly high-quality special design in all top-grade steel design for use in cisterns - apart from that comes optimally suited for discharging water from wells and shafts For a versatile use of grey water - such as garden watering or the operation of irrigation systems Multistage hydraulic system with closed radial impellers made of Noryl
All deep-well pumps from T.I.P. are capable of building up a pressure of 1.5 bar which is the minimum pressure required for automation. When installing the optional Brio 2000-M electronic controlling system which is needed for automation, the water being discharged can be used just as conveniently as if it was taken from the water mains, and moreover this feature provides an additional protection from damage caused by operation in the absence of water.
High degree of stableness and secure positioning owing to a very solid support foot Comprehensive standard equipment: Solid lowering rope, high-grade suction hose made of foodproof material, intake filter with check/non-return valve, highly effective float for cistern pumps (its buoyant force insures a sufficient distance between the end of the suction line and the bottom, thus preventing particles at the bottom from being sucked in)
www.tip-pumpen.de
12
TECHNIK + KOMPETENZ
T.I.P.
Deep-well pump
Deep-well pump
Deep-well pump
Cistern pump
AJ 4 Plus 55/50
AJ 4 Plus 100/36
AJ 4 Plus 100/57
EJ 6 Plus
For discharging water from For discharging water from very deep down great depth Pressure-intensive applications Very large discharge High-grade steel pump volume housing High-grade steel pump housing
Very powerful unit High-quality special deve For discharging water from lopment in all high-grade steel very deep down design for use in cisterns and Pressure-intensive applications wells Very large discharge volume For discharging water from High-grade steel pump housing very deep down
Max. flow rate Max. delivery height / pressure Nominal performance Max. submersion depth Pressure port Well diameter min. Max. grain size / sand Item number
3.300 l/h 50 m / 5,0 bar 800 Watt 20 m 39,59 mm (1 1/4 FT) 100 mm
P 2 mm / 50 g/m3
6.000 l/h 36 m / 3,6 bar 750 Watt 20 m 39,59 mm (1 1/4 FT) 100 mm
P 2 mm / 50 g/m3
6.000 l/h 57 m / 5,7 bar 1.100 Watt 20 m 39,59 mm (1 1/4 FT) 100 mm
P 2 mm / 50 g/m3
6.000 l/h 55 m / 5,5 bar 1.400 Watt 20 m 30,93 mm (1 FT) 350 mm 0 mm 30156
55,0 m 45,0 m 40,0 m 35,0 m 30,0 m 25,0 m 20,0 m 15,0 m 10,0 m 5,0 m
30104
50,0 m 45,0 m 40,0 m 35,0 m 30,0 m 25,0 m 20,0 m 15,0 m 10,0 m 5,0 m
30155
30086
57,0 m 45,0 m 40,0 m 35,0 m 30,0 m 25,0 m 20,0 m 15,0 m 10,0 m 5,0 m
Number of sprinklers
450 l/h 950 l/h 1.400 l/h 1.750 l/h 1.900 l/h 2.100 l/h 2.300 l/h 2.600 l/h 2.950 l/h
2.700 l/h 3.600 l/h 4.100 l/h 4.650 l/h 5.150 l/h 5.550 l/h
2.150 l/h 2.950 l/h 3.550 l/h 3.950 l/h 4.150 l/h 4.650 l/h 4.950 l/h 5.300 l/h 5.650 l/h
1.700 l/h 2.600 l/h 3.400 l/h 3.950 l/h 4.400 l/h 4.800 l/h 5.100 l/h 5.450 l/h 5.700 l/h
3x
4x
6x
6x
www.tip-pumpen.de
13
T.I.P.
TECHNIK + KOMPETENZ
Irrigation
Garden pumps
Water withdrawal from reservoirs, welds, watercourses Filling and emptying of ponds, basins, storage reservoirs Watering and operation of irrigation systems Suitable for mobile use or stationary installations is Maintenance-free motor with thermal overload protection Pump housing made of plastic, cast iron or high-grade steel All units are suitable for automation
Garden pumps are versatile pumps for mobile use or stationary installation. They are ideally suited for pumping water out of wells, watercourses or cisterns, for instance to irrigate your garden. Their range of application also includes the filling or emptying of ponds, basins or reservoir tanks. All units are equipped with a thermal motor protection.
The use of garden pumps enables the water being withdrawn to be conveyed on under high pressure. This means that these units are very well suitable for operating watering systems most of the units can even be used with multiple sprinklers. Moreover, the typical areas of use of garden pumps include other pressureintensive purposes, such as the efficient flushing of terraces or boardwalks.
A suction hose of 4 metres length with check valve comes with some of our garden pumps as a convenient element of the standard scope of delivery. In addition, we offer you suction hoses of various lengths and quality grades from solid plastic types up to professional suction fitting sets in high-quality design with a very high operating-pressure rating. For the range of products offered, please refer to page 31.
Height difference between the water surface and the pump. Height difference between the water surface and the point of water withdrawal. The max. delivery height is referred to as pump head. Example: If a pump takes in water in 5 m depth to lift it 15 m upwards, the pump head totals 20 m.
www.tip-pumpen.de
14
Garden pumps
TECHNIK + KOMPETENZ
T.I.P.
Garden pumps
The Garten-Jet series: Smooth-running units with robust pump housing
Owing to their cast-iron pump housing, the units of the Garten-Jet series excel by their particular robustness and smooth running operation. The Garten-Jet 750, which completes all tasks of garden pumps in a highly reliable manner and with a comparably low energy consumption, is the ideal starter model in compact design. The Garten-Jet 1200 with its high efficiency degree also permits large-area watering and applications in the agricultural range.
Garden pump
Garden pump
Garden pump
GPK 46/42
Garten-Jet 750
Garten-Jet 1200
Reliable starter unit with pump housing Smooth-running starter unit with pump Smooth-running, very powerful starter made of impact-resistant plastic housing made of solid cast iron unit with housing made of solid cast iron Low weight Very solid and reliable unit Suitable for continuous operation Suitable for all areas of use of garden Suitable for all areas of use of garden Also very well suited for the agricultural pumps pumps sector, for instance for large-area watering
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing Cross weight Item number
2.800 l/h 42 m / 4,2 bar 550 Watt 33,25 mm (1 MT) 33,25 mm (1 MT) Plastic 6,2 kg 30124
2.800 l/h 42 m / 4,2 bar 600 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) Cast iron 8,6 kg 31175
4.300 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) Cast iron 16,4 kg 31174
50 m 42 m 40 m 30 m 20 m 10 m 150 l/h 700 l/h 1.850 l/h 2.500 l/h 42 m 40 m 30 m 20 m 10 m 150 l/h 600 l/h 1.500 l/h 2.400 l/h 45 m 40 m 30 m 20 m 10 m 800 l/h 1.700 l/h 2.650 l/h 3.600 l/h 4.100 l/h
Number of sprinklers
1x 1x 5x
www.tip-pumpen.de
15
T.I.P.
TECHNIK + KOMPETENZ
Garden pumps
Clean Jet 1600 Plus: Garden pump meeting highest demands
Very powerful garden pump in high-quality workmanship Pump housing made of highgrade steel Maintenance-free capacitor motor with thermal overload protection Particularly large suction port A solid metal plate provides for a solid standing and ease of installation in the case of stationary use
Garden pump
Garden pump
Garden pump
Garden pump
GP 3000 INOX
Ideal starter unit to the product series equipped with high-grade steel pump housing Suitable for all areas of use of garden pumps
GP 4500 INOX/Kit
High-grade steel pump housing Top-class unit Comes with a suction hose (4 m) with inlet filter and check (non-return) valve
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing Cross weight Item number
2.950 l/h 42 m / 4,2 bar 550 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel 6,3 kg 30111
4.350 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel 11,4 kg 30106
3.300 l/h 46 m / 4,6 bar 800 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel 8,9 kg 30094
5.400 l/h 50 m / 5,0 bar 1.600 Watt 30,93 mm (1 FT) 41,91 mm (1 1/4 MT) High-grade steel 13,0 kg 30159
50 m 42 m 40 m 30 m 20 m 10 m 150 l/h 600 l/h 1.500 l/h 2.400 l/h 42 m 40 m 30 m 20 m 10 m 800 l/h 1.400 l/h 2.700 l/h 3.500 l/h 3.900 l/h
46 m 42 m 40 m 30 m 20 m 10 m 400 l/h 460 l/h 1.200 l/h 2.550 l/h 3.200 l/h
50 m 42 m 40 m 30 m 20 m 10 m 1.000 l/h 1.500 l/h 3.200 l/h 5.000 l/h 5.100 l/h
Number of sprinklers
2x 5x 2x 6x
www.tip-pumpen.de
16
TECHNIK + KOMPETENZ
T.I.P.
MIN
10 x (ca. 1 m)
Maintenance
Regular maintenance and thorough care will reduce the risk of operational disturbances and extend the lifetime of pumps. Where necessary, it is recommendable for submersible pumps to clean the hydraulic parts by way of counter-flushing the unit with clear water through the pressure port. To facilitate the removal of stubborn dirt, the pump foot can be dismantled. In the case of booster sets, a regular check of the pressure being generated and the energy being consumed makes sense. Also, the pre-charge pressure (atmospheric pressure) in the pressure tank, which must not fall below 1.5 bar, should be checked regularly through the tank valve. The intake filter of the deep-well pumps of the AJ 4 Plus series, which can be unscrewed from the unit for this purpose, should be cleaned on a regular basis. In frosty conditions, submersible pumps have to be removed from the water, and in this case basically all pumps including their pipe system should be drained.
Relationship between flow rate and suction height with the Clean Jet 1600 Plus garden pump serving as an example
www.tip-pumpen.de
17
T.I.P.
TECHNIK + KOMPETENZ
Irrigation / Automation
The cut-in and cut-out pressure can be set individually Automation is possible with all submersible pressure pumps, garden pumps and deep-well pumps from T.I.P. By installing an electronic or mechanical control system you can use the discharged fluid the same way as if you took it from the water mains: By simply opening or closing water taps. Apart from that, electronic control systems will protect your pump from damage caused by dry-running since these systems will cut out automatically in the absence of water. Electronic control systems will provide a pump control as a function of pressure and water flow rate. The Brio 2000-M control system will switch the pump on either when the tap is opened or as soon as pressure has dropped to a specific minimum value. When water tapping stops, the pump will switch off. The ON pressure can be set individually. Mechanical control systems will control the pump on the basis of an interaction between a pressure tank and the ON and OFF pressure. They will switch the pump on by enabling the current to flow. When the water-consuming appliance is switched off or the tap is shut, the current supply will be cut out, and the pump will switch off. The ON and OFF pressure can be set by a mechanic.
The automated operation of a pump offers numerous benefits. For instance, it is possible to use water taken from wells or rainwater collected in cisterns for domestic water provision, e.g. for the operation of washing machines, showers or toilet flushing systems. Owing to its high efficiency and reliability, an automated pump will also convince when used for watering or the operation of sprinklers.
www.tip-pumpen.de
18
TECHNIK + KOMPETENZ
T.I.P.
An automatic booster set corresponds to the combination of a garden pump with an electronic control system. Our broad and carefully scaled range of garden pumps provides a variety of options, which allow the purposeful realisation of individual requirements. In addition, with the HWA 3000 INOX and HWA 4500 INOX, our range of products includes two conventional automatic booster sets in high-grade workmanship.
Automatic booster set Automatic booster set
Unit in high-quality workmanship Very powerful unit in high-quality workmanship High-grade steel pump housing Electronic pump control and High-grade steel pump housing Electronic pump control and pressure gauge pressure gauge Solid metal plate included Solid metal plate included
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing Cross weight Item number
2.800 l/h 42 m / 4,2 bar 550 Watt 33,25 mm (1 MT) 30,93 mm (1 FT) High-grade steel 7,3 kg 31142
4.350 l/h 50 m / 5,0 bar 1.200 Watt 33,25 mm (1 MT) 30,93 mm (1 FT) High-grade steel 11,1 kg 31193 The Brio 2000-M electronic control system excels by its extremely high reliability and functional safety. Easily and instantly installed, the Brio 2000-M allows the automation of any kind of pressure pump capable of generating a minimum of 1.5 bar. Unlike the cut-out pressure, the cut-in pressure is adjustable, since after closing the water tap cutting out will occur automatically as a function of performance. The Brio 2000-M is equipped with a pressure gauge for accurate pressure control. As an additional benefit, the Brio 2000-M will cut out the pump in the absence of water and thus prevent the pump from damage caused by dry-running.
50 m 42 m 40 m 30 m 20 m 10 m 150 l/h 600 l/h 1.500 l/h 2.400 l/h 42 m 40 m 30 m 20 m 10 m 800 l/h 1.400 l/h 2.700 l/h 3.500 l/h 3.900 l/h
Number of sprinklers
2x 5x
www.tip-pumpen.de
19
T.I.P.
TECHNIK + KOMPETENZ
Booster sets
Domestic water supply with grey water Pressure increase in the domestic water system Automated watering using sprinklers Withdrawal of water at a constant pressure Large tank for optimum pressure equalisation Units with anti dry-running feature and prefilter Pump housing made of impact-resistant plastic, sturdy cast or top-grade steel All units supplied with food-proof diaphragm
Domestic water supply counts among the key applications of booster sets. In an increasing number of households, people rather use rain, grey or groundwater for many applications instead of expensive and valuable drinking water taken from the mains. This makes sense, for instance, for flushing toilets, operating washing machines or supplying showers - and of course for irrigation.
Automatic irrigation is one of typical ranges of applications for which booster sets are especially suited. Normally, the expansion of the long flexible hoses which are commonly used is responsible for a pressure drop within the system. The size of the large tank of a booster set compensates for this and prevents the pump from cutting in again.
Pressure boosting in a domestic water system may be necessary for various reasons. For instance in the top storeys the water frequently arrives with a poor pressure. In such cases the installation of a booster set to act as a pressure-increasing system is recommendable. The cut-in and the cut-out pressure can be set very specifically, so that the insufficient pressure provided in the domestic water system can be increased to highly accurate target values. An anti dry-running feature prevents the hydraulic parts of pumps from possible overheating occurring as a result of operating the pump in the absence of liquid. This so-called dry-running is frequently the reason of considerable damage to the unit. The anti dry-running feature consistently suppresses this risk since it causes the pump to cut out in time. Prefilters are recommended as accessories, in particular for self-priming pumps. They will extend the lifetime of the pump since they filter out efficiently sand and solid matters from the fluid being conveyed. The high-quality filter mesh made of highly impact-resistant plastic can be cleaned conveniently so that it can be used over and over again. Some booster sets come with an anti dry-running feature and/or a prefilter as a standard. Units without these features can be retrofitted without any problems. You will find the appropriate accessories on pages 32 and 33.
The cut-in and cut-out pressure can be set individually Almost all booster sets from T.I.P. are equipped with a mechanical control system. Upon reaching the cut-in or cut-out pressure, usually preset to 2 or 3 bar, respectively, the pump will cut in or cut out. Changing these preset values which are ideally suited for most installations must only be done by a qualified plumbing or electrical expert.
www.tip-pumpen.de
20
Booster sets
TECHNIK + KOMPETENZ
T.I.P.
Booster sets
The robust series: Cast-iron pump housings
Smooth-running, self-priming booster sets with pump housings made of robust cast iron and pressure tanks made of painted steel For discharging water at constant pressure, domestic water supply with grey water, pressure boosting, watering, irrigation Maintenance-free capacitor motor with thermal overload protection Compact, space-saving, lightweight units coming with an 18 L pressure tank Units with a large 24 L pressure tank for an increase of the water supply and a reduction of the cut-in/cut-out frequency All units come with a pressure gauge and a food-proof diaphragm
Booster set
Booster set
Booster set
Booster set
HWK 46/42
Solid starter unit Plastic pump housing 18 L pressure tank Compact design Low weight
HWW 1200/25
Extremely powerful unit Pump housing made of cast iron 24 L pressure tank Large discharge volume and pressure Very smooth-running pump
HWW 3600 I
Powerful unit High-grade steel pump housing 18 L pressure tank Compact design
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing / Pressure tank Cross weight Item number
2.800 l/h 42 m / 4,2 bar 550 Watt 33,25 mm (1 MT) 33,25 mm (1 MT) Plastic / Steel 12,3 kg 31202
2.800 l/h 42 m / 4,2 bar 600 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) Cast iron / Steel 14,7 kg 31300
4.300 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) Cast iron / Steel 23,0 kg 31111
3.600 l/h 40 m / 4,0 bar 650 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 13,1 kg 31188
50 m 42 m 40 m 30 m 20 m 10 m 150 l/h 700 l/h 1.850 l/h 2.500 l/h 42 m 40 m 30 m 20 m 10 m 150 l/h 600 l/h 1.500 l/h 2.400 l/h 42 m 40 m 30 m 20 m 10 m 800 l/h 1.700 l/h 2.650 l/h 3.600 l/h 4.100 l/h 40 m 30 m 20 m 10 m 1.250 l/h 2.430 l/h 3.200 l/h
Number of sprinklers
1x 1x 5x 2x
www.tip-pumpen.de
21
T.I.P.
TECHNIK + KOMPETENZ
Booster sets
The higher graded series: High-grade-steel pump housing
Self-priming booster sets with pump housings made of high-grade steel and pressure tanks made of painted steel For discharging water at constant pressure, domestic water supply with grey water, pressure boosting, watering, irrigation Maintenance-free capacitor motor with thermal overload protection Units equipped with a high-quality prefilter and/or a very efficient anti dry-running feature All units with a large 24 L pressure tank for an increase of the water supply and a reduction of the cut-in/cut-out frequency All units come with a pressure gauge and a food-proof diaphragm
Booster set
Booster set
Booster set
Booster set
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing / Pressure tank Cross weight Item number
3.300 l/h 46 m / 4,6 bar 800 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 13,5 kg 31146
3.300 l/h 46 m / 4,6 bar 800 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 13,9 kg 31145
3.300 l/h 46 m / 4,6 bar 800 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 14,2 kg 31144
3.300 l/h 46 m / 4,6 bar 800 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 14,6 kg 31141
46 m 42 m 40 m 30 m 20 m 10 m 400 l/h 460 l/h 1.200 l/h 2.550 l/h 3.200 l/h
46 m 42 m 40 m 30 m 20 m 10 m 400 l/h 460 l/h 1.200 l/h 2.550 l/h 3.200 l/h
46 m 42 m 40 m 30 m 20 m 10 m 400 l/h 460 l/h 1.200 l/h 2.550 l/h 3.200 l/h
46 m 42 m 40 m 30 m 20 m 10 m 400 l/h 460 l/h 1.200 l/h 2.550 l/h 3.200 l/h
Number of sprinklers
2x 2x 2x 2x
www.tip-pumpen.de
22
Booster sets
TECHNIK + KOMPETENZ
T.I.P.
Booster sets
Booster set
Booster set
Booster set
Booster set
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing / Pressure tank Cross weight Item number
4.200 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 16,0 kg 31147
4.200 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 16,4 kg 31158
4.200 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 17,2 kg 31157
5.400 l/h 50 m / 5,0 bar 1.600 Watt 30,93 mm (1 FT) 41,91 mm (1 1/4 MT) High-grade steel / Steel 18,6 kg 31148
50 m 42 m 40 m 30 m 20 m 10 m 1.100 l/h 1.200 l/h 2.500 l/h 3.100 l/h 3.800 l/h
50 m 42 m 40 m 30 m 20 m 10 m 1.100 l/h 1.200 l/h 2.500 l/h 3.100 l/h 3.800 l/h
50 m 42 m 40 m 30 m 20 m 10 m 1.100 l/h 1.200 l/h 2.500 l/h 3.100 l/h 3.800 l/h
50 m 42 m 40 m 30 m 20 m 10 m 1.000 l/h 1.500 l/h 3.200 l/h 5.000 l/h 5.100 l/h
Number of sprinklers
4x 4x 4x 6x
www.tip-pumpen.de
23
T.I.P.
TECHNIK + KOMPETENZ
Booster set
Booster set
Booster set
Booster set
Reliable starter unit in all Powerful and efficient unit high-grade steel series Pump housing and pressure Pump housing and pressure tank made of high-grade steel tank made of high-grade steel 24 L pressure tank 24 L pressure tank
Powerful and efficient unit Particularly powerful unit with Pump housing and pressure very large discharge volume tank made of high-grade steel Pump housing and pressure 24 L pressure tank tank made of high-grade steel High-quality prefilter 24 L pressure tank Anti dry-running feature
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing / Pressure tank Cross weight Item number
2.950 l/h 42 m / 4,2 bar 550 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel 12,2 kg 31143
4.350 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel 16,2 kg 31140
4.200 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel 17,1 kg 31155
5.400 l/h 50 m / 5,0 bar 1.600 Watt 30,93 mm (1 FT) 41,91 mm (1 1/4 MT) High-grade steel 18,5 kg 31163
50 m 42 m 40 m 30 m 20 m 10 m 150 l/h 600 l/h 1.500 l/h 2.400 l/h 42 m 40 m 30 m 20 m 10 m 800 l/h 1.400 l/h 2.700 l/h 3.500 l/h 3.900 l/h
50 m 42 m 40 m 30 m 20 m 10 m 700 l/h 1.200 l/h 2.500 l/h 3.100 l/h 3.800 l/h
50 m 42 m 40 m 30 m 20 m 10 m 1.000 l/h 1.500 l/h 3.200 l/h 5.000 l/h 5.100 l/h
Number of sprinklers
1x 5x 4x 6x
www.tip-pumpen.de
24
General information
TECHNIK + KOMPETENZ
T.I.P.
oder
oder
HM
min. 10 l/min
Delivery height (HM) + 10 m Friction loss (15%) + 1,5 m = 11,5 m Min. pressure* + 20 m Total delivery height = 31,5 m
* Min. delivery pressure 2,0 bar W 20 m delivery height
It takes just a few calculations to find out the suitable type of booster set for your requirements. First of all, use the opposite chart to determine your max. water consumption. Example: If you wish that your bath tub, dishwasher and washing machine can be used at the same time, you simply add up the individual values and arrive at 33 l/min for the max. water consumption. Multiplied by 60, this leads to the water volume per hour: 792 l/h. The next thing to do is to calculate the total discharge height. First of all, you need the actual discharge height - i.e. the height difference between the water surface and the highest place of withdrawal, increased by 15% to allow for the calculation of friction losses. Subsequently, you consider the required min. pressure which is defined by the consumer device with the highest operating pressure. The pressure, here indicated in terms of bar, is then to be multiplied by 10 to convert it to metres. Adding the two values will result in the arithmetical
total discharge height. Example: Your booster set is supposed to be able to withdraw water from a depth of 4 m and convey it to the highest withdrawal place in 6 m height (actual discharge height = 10 m). Increased by 15%, you arrive at 11.15 m. The minimum pressure is supposed to be 2 bar. When converted, this corresponds to 20 m. When adding up these values (11.5 m plus 20 m) you will arrive at the total discharge height of 31.5 m. On the basis of the calculated max. water consumption and the mathematical total discharge height, all you need to do is to refer to the discharge volume and discharge height charts for the specific booster set to see whether a specific product will fit your requirements. For instance, you will see on page 21 that the HWW 3600 I (30 m / 1,250 l/h) will actually satisfy your needs, whereas the HWW 46/42 (30 m / 700 l/h) will not.
www.tip-pumpen.de
25
T.I.P.
TECHNIK + KOMPETENZ
The HWW 1300/50 Plus TLS special booster set is equipped with a very powerful, self priming pump with a housing made of high-grade steel. With its considerable max. discharge flow rate and its high maximum pressure, in combination with the large pressure tank and the armoured hose, this unit is best suited for all application areas of booster sets, in particular for domestic water supply and as a pressure increase system. This superior type is rounded off by an integrated anti dry-running feature.
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing / Pressure tank Cross weight Item number
4.200 l/h 50 m / 5,0 bar 1.200 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) High-grade steel / Steel 21,2 kg 31311 The HWW 1300/50 Plus TLS booster set is the ideal device for users who attach great importance to a clearly reduced switching frequency. In particular in context with domestic water supply in grey water, this is an important criterion since the resulting decrease of the switching frequency will also reduce the noise level involved with the start and operation of the pump. This noise may be extremely disturbing, in particular in times of silence or at nighttime, and it may be considerably decreased by selecting a pump that is equipped with a large pressure tank.
50 m 42 m 40 m 30 m 20 m 10 m 1.100 l/h 1.200 l/h 2.500 l/h 3.100 l/h 3.800 l/h
Number of sprinklers
4x
www.tip-pumpen.de
26
TECHNIK + KOMPETENZ
T.I.P.
max. 20 m
max. 45 m
In the case of self-priming pumps, physical laws usually restrict the suction height to a maximum of 9 m. Owing to an innovative water recirculating process the HWW AP 1000 N 20 is capable of extending the suction depth down to 20 m. This permits particularly deeplying water resources to be used efficiently for all typical areas of application of booster sets.
HWW AP 1000 N 20
Special development for deep intake down to 20 m Special water recirculation system using an injector and circulation line Very smooth-running unit with pump housing made of cast iron Suitable for all typical areas of use of booster sets
Max. flow rate Max. delivery height / pressure Nominal performance Pressure port Suction port Pump housing / Pressure tank Cross weight Item number
2.600 l/h 45 m / 4,5 bar 1.000 Watt 30,93 mm (1 FT) 39,59 mm (1 1/4 FT) Cast iron / Steel 23,0 kg 31078 While conventional booster sets are equipped with just a suction line, the units conceived for deep intake feature an additional circulation line with a separate port. When the liquid is sucked in, a part of the water is led back through the circulation line into an injector. This generates the pressure that is needed for taking in water from great depth.
Delivery height Suction height 10 m 10 m 15 m 20 m 40 l/min 35 l/min 24 l/min 15 m 32 l/min 28 l/min 16 l/min 25 m 18 l/min 14 l/min 10 l/min 35 m 8 l/min 4 l/min
www.tip-pumpen.de
27
T.I.P.
TECHNIK + KOMPETENZ
Special pumps
Petrol-engine pumps
Operation independent of the electrical mains Ideal pumps for use in allotment gardens, weekend homes, agricultural applications, and on constructionsites Pump housing made of aluminium Drainage, irrigation, evacuation, emergency drainage Robust, air-cooled 4-stroke engines Easy engine start by means of a rope pull
Petrol-engine pumps have proven to be the optimum solution in places which are far from the electrical mains. The LTP series includes units of a very high quality equipped with robust, powerful 4-stroke engines. The convenient equipment includes connection pieces for the pressureand suction-side ports, an integrated non-return flap on the suction side and an oil-level protection feature (Auto-Stop).
For agricultural use, such as watering or irrigation, petrol-engine pumps with their very high flow rates have proven to be almost perfectly suited. The typical areas of use include emptying or filling of ponds and basins far away from any available electrical connection, or the water supply of construction-sites, allotment gardens, weekend homes or garden sheds.
During inundations, the electricity supply frequently collapses so that electrical pumps cannot be used for emergency drainage. Also, flooding leads to situations where the use of an electrically driven pump is not advisable for reason of the hazard of an electrical shock. In emergency cases like that, petrol-engine pumps with their large capacity are the almost perfect solution.
Starting on page 31, you will find high-quality accessories for the LTP series - for instance, hoses with large dimensions which are also available by the metre. Professional installations can be realised using joint bolt clips, connection pieces and brass foot valves. The reducing piece coming with the LTP 40 serves to reduce the connection dimension from 47,80 mm (1 MT) to 41,91 mm (1 MT).
www.tip-pumpen.de
28
TECHNIK + KOMPETENZ
T.I.P.
Petrol-engine pumps
Petrol-engine pump
Petrol-engine pump
Petrol-engine pump
LTP 40/10
Flow rate max. Pressure max. Delivery height max. Suction height max. Cylinder capacity Power max. Pressure port Suction port Tank volume Fuel Liquid temperature min. / max. Item number 10.000 l/h 1,5 bar 15 m 4m 97,7 ccm 1,1 kW (1,5 HP) 47,80 mm (1 1/2 MT), 40 mm 47,80 mm (1 1/2 MT), 40 mm 1,4 l Petrol, unleaded 2 C / 35 C 30131
LTP 50/25
25.000 l/h 2,6 bar 26 m 6m 196 ccm 3,8 kW (5,1 HP) 59,61 mm (2 MT), 50 mm 59,61 mm (2 MT), 50 mm 3,6 l Petrol, unleaded 2 C / 40 C 30132
26 m 24 m 20 m 16 m 6.700 l/h 8.800 l/h 9.900 l/h 9.950 l/h 12 m 8m 4m 1m
LTP 80/48
48.000 l/h 3,0 bar 30 m 6m 196 ccm 3,8 kW (5,1 HP) 87,88 mm (3 MT), 75 mm 87,88 mm (3 MT), 75 mm 3,6 l Petrol, unleaded 2 C / 40 C 30129
30 m 24 m 20 m 16 m 12 m 8m 4m 1m
15 m 12 m 8m 4m 1m
11.100 l/h 17.000 l/h 20.800 l/h 23.100 l/h 24.500 l/h 24.700 l/h 24.900 l/h
29.000 l/h 36.000 l/h 41.200 l/h 44.500 l/h 47.000 l/h 47.600 l/h 47.800 l/h
www.tip-pumpen.de
29
T.I.P.
TECHNIK + KOMPETENZ
Special pumps
Special pump
MultiOil 35 M
Flow rate max. Delivery height max. Pressure max. Nominal performance Pressure port Suction port Suction height max. Liquid temperature max. Impeller Power cord Weight Item number 35 l/min (2.100 l/h) 35 m 3,5 bar 550 Watt 30,93 mm (1 FT) 30,93 mm (1 FT) 5m 40 C Brass 1,5 m 10,8 kg 30070
35 m 30 m 25 m 20 m 15 m 10 m 5m 1m 3,5 l/min 7 l/min 11 l/min 16,5 l/min 21,5 l/min 27,5 l/min 34 l/min
Discharging liquids such as diesel fuel, fuel oil and rapeseed oil is only possible with pumps which were especially designed for these purposes. The MultiOil 35 M is a very robust special development suited for filling and emptying fuel oil tanks or for fuelling trucks, cars, construction and agricultural machines with diesel fuel and rapeseed oil. The pump housing made of cast-iron and the impeller made of brass guarantee a long lifetime. The MultiOil 35 M comes completely equipped with a gun-type fuelling nozzle, a fuelling hose, a suction hose and a brass foot valve.
www.tip-pumpen.de
30
Accessories
TECHNIK + KOMPETENZ
T.I.P.
31009
31008
10 m Item number
30904
31012
30907
Hose accessories
Foot valve, complete, brass 40 mm (1 ) Item no. 30937 50,8 mm (2) Item no. 30938 ; Joint bolt clip 43 - 47 mm / Width: 18 mm for 40 mm (1 ) hoses Item no. 30948 54-58 mm / Width: 20 mm for 50 mm (2) hoses Item no. 30949 79-85 mm / Width: 25 mm for 75 mm (3) hoses Item no. 30950 = GK connection piece, brass 45,48 mm (1 FT) Item no. 30946
31010 31011
www.tip-pumpen.de
31
T.I.P.
TECHNIK + KOMPETENZ
Accessories
Lowering rope 20 m
Heavy-duty nylon lowering rope. Suitable to be fastened to submersible pumps for lowering them down into shafts.
Item number
30914
Item number
30913
20 m Item number
30912
Item number
30947
for filtering out sand and solids. Filtering effect 80 . ; Washable plastic filter cartridge for sand and solids. 127 mm (5) for filter G 5 Item no. 31054 178 mm (7) for filter G 7 Item no. 31056 254 mm (10) for filter G 10 Item no. 31055
Active carbon filter cartridge chlorine, odours, taste and cloudi- For use in active carbon water ness from the mains water. filter, item number 31081 - to Recommended flow rate: 12 l/min improve water quality. ; Polyphosphate special filter for lowering mains water hardness. Provides efficient protection from calcination and also protects from damage caused by corrosion. Recommended flow rate: 4 l/min ; Polyphosphate filter cartridge
For use in polyphosphate water filter, item number 31084 - for removing mains water hardness.
127 mm (5) for filter G 5 Item no. 31053 178 mm (7) for filter G 7 Item no. 31057 254 mm (10) for filter G 10 Item no. 31051
www.tip-pumpen.de
32
Accessories
TECHNIK + KOMPETENZ
T.I.P.
Armoured hose 60 cm
Flexible, rust-free connection hose. Simple, fast installation. Perfectly suited for connecting water pipe and pump, heating boiler or pressure tanks. For water distribution in heating and airconditioning installations. Suitable for drinking water. Food-proof. Includes gaskets. Operating temperature min. / max. - 5 C / + 100 C Operating pressure max. 10 bar Connection port 30,93 mm (1 FT) / 33,25 mm (1 MT) Item number 30903
For accurate pressure control. Measuring range up to 6 bar max. Connection port 13,16 mm (1/4 MT) ; Pressure switch Used to automate the on / off function in combination with the appropriate additional accessories. Connection port 11,89 mm (1/4 FT) Fluid temp. max. 35 C Weight 0,37 kg
;
Item number 31002
Item number
30915
Vibration dampener VD 4
This vibration dampener set is intended for units such as booster sets, automatic booster sets or garden pumps. Their use clearly reduces the transmission of noise. Owing to the use of high-quality material in their production (rubber), abrasion, scratching or skidding is excluded. The required fastening material comes with the set.
Item number
30905
Item number
30995
Item number
30996
Item number
30943
www.tip-pumpen.de
33
T.I.P.
TECHNIK + KOMPETENZ
Accessories
SW connection bents
;
Item number 30910
;
Item number 30923
;
Item number 30917
Item number
30908
Double nipple
Double nipple 33,25 mm (1 MT) 33,25 mm (1 MT)
;
Item number 30945
;
Item number 30944
;
Item number 30926
;
Item number 30955
www.tip-pumpen.de
34
Contact
TECHNIK + KOMPETENZ
T.I.P.
www.tip-pumpen.de
35
Pumpen
T.I.P .
www.tip-pumpen.de