FRP Catalogue 04.2021 Rev03 - OGLAEND
FRP Catalogue 04.2021 Rev03 - OGLAEND
FRP Catalogue 04.2021 Rev03 - OGLAEND
CO M P O S IT E
PRO DUCT S
COMPL ETE FR P/GR P SUPPORT SYSTE M
This Product Catalogue has been split into convenient sections covering the
main product ranges we are proud to offer. Each section is preceded by a
short introduction to the range, and contains important and useful information
on how to identify the products from the type descriptions and product names.
We invite you to preview these pages in order to maximise your experience of
the offering. Our products are all illustrated for easy identification, and detailed
by type descriptions, type names and article numbers. We have also included
the weights in order that considerations can be made for build weight and
most importantly for HSE.
70 = Rail height
FE = Flat Elbow
90 = Angle
150 = Width
R300 = Radius
FRP = Material
2
Table of Contents
3
Company
About us
Oglaend System (ØS) is a global and market leading solution provider of multidiscipline
support systems, cable ladders, cable trays and associated services. Whether it is oil &
gas, shipbuilding, wind energy or renewables, our 40 years of experience in the offshore
industry helps provide our customers with the most cost efficient and durable supports
solutions across disciplines.
Our systems help reduce the total installed cost of supports by reducing total weight,
installation time and engineering hours through standardization, simplification and digi-
talization. ØS support systems and innovative modular Mekano® triangular channels are
pre-engineered using a finite element simulation environment called P4D® (Precision for
Decision). Complemented with digital twins in all the major 3D software - PDMS, E3D,
S3D our system seamlessly integrates with customer workflow. Refer to our primary
product catalogue for more information on Mekano® channels.
Oglaend System is part of the Hilti Group, who are renowned for quality tools and
fasteners and has a strong global presence in the construction, energy and industry
segments. By combining Hilti’s fastening on steel and Oglaend System’s multidiscipline
support systems we can provide the ultimate combination of flexibility, strength and
corrosion resistance.
Factory Certification
We offer an extensive local stock
and the best possible supply
chain in the market. Our factories
are located in Norway, Malaysia,
China and Russia. All factories are
ISO 9001 certified and Norway,
Malaysia and China also hold
14001 and 45001 certifications.
4
How do our products and system make you more competitive?
We always aim to make our customers more competitive by reducing the total
installed cost. Our MultiGrid® installation concept reduces the total system cost of a
project by up to 30%. By reducing weight, installation and engineering time, optimiz-
ing coordination between disciplines and simplifying future modification work. We
reduce the amount of hot work required for an installation, which in turn also works
to reduce the safety risks. The project risks are also reduced when engineering and
construction are decoupled.
We partner with our customers throughout entire project cycle. Our innovative and
standardized support system is complemented with digital and engineering services,
thereby increasing productivity and reducing the overall cost. ØS engineers supports
clients in 3D design, structural analysis and product development.
5
Advantages of FRP
Oglaend System’s FRP cable management system has been designed to work
in most extreme environments. Products are designed and manufactured to the
highest quality standards while at the same time offering exceptional values to our
customers. FRP products have many advantages, some of which are shown below.
6
Flexibility of FRP
Oglaend System has an extensive standard FRP product range, much of which
is stocked in strategic global locations. However, we also appreciate that many
project require tailor made solutions to overcome unique challenges. In order to
deliver standardization with flexibility, our FRP product range and manufacturing
systems are designed to offer flexibility. Some examples are shown below:
• FRP profiles (including straight sections of Cable Tray and Cable Ladder) can be
supplied in custom lengths.
• Cable Trays and Cable Ladder fittings can be provided in a wide variety of special
angles and radius.
• Cable Ladder can be produced in custom widths between 150 and 900 mm.
• Risers can be easily adjusted so that an inside Riser can be used as an outside Riser
and vice versa.
• Straight Cable Ladder sections can be supplied in kit form to save on shipping
volume.
• We have standardized our products so that even after delivery it is possible for
fastener and accessory material type to be changed without the need for any
additional modifications. (This is applicable to the majority of our products).
• FRP products are easy to cut and drill on site and by using our Smart Jigs you can
ensure that perforations for splice connectors are drilled in the correct location.
7
Complete FRP Product Line
As a complete system provider of cable management and multidiscipline support
systems in many material types, with world wide references, our recommendations
are trustworthy and focused. You can be confident that when you are next in the
market for a non-metallic support system, Oglaend System FRP ladder, tray and
support will be your best choice for value, ease of installation and technical quality.
8
FRP System Features
Nonie™ principle: adjustment possibilities Support channels, Cantilever arms and Ceiling T-sup-
in 4° steps. ports available in FRP.
Our complete FRP support system is complemented Comprehensive range of brackets for equipment.
by our MultiGrid® installation concept.
Snap-lock feature on FTE tray covers up to 300 mm A complete range of fittings gives flexible installation
wide. High wind cover clamps are also available. around objects.
Pre-slotted design saves drilling time. Fix cables quick Smart Jigs are available for quick and easy installation.
and easy with cable ties.
9
FRP Composite Materials
FRP Resin Guide
Polyester
Resin code: Standard article number
Polyester is the most widely used resin system. It offers
good weathering properties with resistance to ultraviolet
light and has good corrosion resistance. Our Polyester
resin has been specially formulated to meet certain fire
and smoke standards and is classified as a “class 1” resin
Composite materials (FRP) in accordance with BS476 P7 and ASTM E84. Our stan-
Oglaend System offers a range of resins to match the dard polyester resin product range is UL approved.
needs of our customers. From our standard polyester
resin to our high performance options, we can meet your Polyester with anti-static properties
chemical, fire, smoke and toxicity requirements. Please Resin code: ’C1A’
contact our technical team with your individual project Polyester resin can be given anti-static properties to meet
requirements for tailor made solutions. project requirements. Anti-static resins contain carbon
powder, which increases the conductivity of the material
GRP/FRP: Note, the pultruded process of manufacture and as a result this material requires grounding.
means there is no difference in GRP/FRP material types.
10
RESIN SELECTION CHART Chemical Resistance
Polyester Resin
Polyester Anti-Static Resin
Low Smoke Low Toxity
0 1 2 3 4 5 6 7 8 9 10
Exposure to
Fire Performance
High Heat
Anti-Static
11
FRP Standards & Certificates
Oglaend System has carried out extensive testing together with fully accredited third part
laboratories and institutes on our FRP product range. The following information represents
some of this testing. If you require a particular standard that has not been indicated here,
please contact us for more support.
ASTM E84
Tests the rate of flame spread and smoke emissions of materials. To test this, sample
material is placed in a test box with a gas burner at one end and a smoke measure-
ment device at the exhaust end. Air circulation is provided to assist the spread of the
flame. Our FRP material received the highest level of certification in this test.
ASTM D257
This test measures the volume and surface resistivity of a material. Our material can
be formulated to obtain a reading of 105 to 109 Ohm. We may lower the resistance and
increase the anti-static properties by adding carbon. Careful consideration must be
given to this process as a conductive product will require grounding.
ASTM D635
Standard test method for measuring the rate of burning and duration of burning in
plastic products. Our FRP product achieved UL94 HB classification requirements.
ASTM D792G
Standard test for measurement of density. All of our resins are extremely lightweight,
with densities ranging from 1699 kg/m3 to 1965 kg/m3. This offers massive advantages
over steel products which have a density approaching 8000 kg/m3. This reduces the
cost of shipping and makes installations easier.
12
ASTM B-117
Tests a materials ability to resist the corrosive effect of salt water. All of our resins dis-
played zero deformation; FRP does not corrode or rust, making it the perfect material
for use in areas exposed to sea spray.
IEC 60068-2-75
Is an impact test using an impact striking device. The material displayed no measurable
damage up to an impact of 10 Joules.
IEC 60754-1
This test ensured that the material has zero halogen content. Halogens are a toxic group
of elements on the periodic table that are sometimes used as flame retardants. All of
our products are halogen free.
GOST 15150-69
The temperature extremes in Russia demand high requirements for performance, inpar-
ticular for low temperature operation. Oglaend FRP retains its material properties well
in extreme cold and the test concluded our material performs well in temperatures as
low as -60ºC.
UL CUL CE
FOE70 Standard resin Standard resin Standard resin
Ladders
13
FRP Manufacturing Process
When we designed Oglaend System FRP cable Pultrusion process
management and multi-discipline support system Pultrusion is a continuous process of roving or mat/
we had one thing in mind: To be Simply the Best! roving bundles, which are drawn through a resin
With over 40 years of experience as a global lead- impregnated bath to coat each fiber with a specially
er in the supply cable support systems, we were formulated resin mixture. The impregnated fibers are
able to fully evaluate product requirements, market then drawn through a heated die which forms the
trends, customer requirements, environmental con- desired cross section. Curing of the thermosetting
siderations, smart designs and cost factors. resin is initiated by heat in the die and catalyst in the
resin. The rate of reaction is controlled by heating
With all these factors in mind, we have created a full the die. The resulting high strength profile is cut to
range of products that are user friendly, cost effi- length and ready to be used in the Oglaend System
cient and deliver safe, high strength solutions. Com- FRP cable management and multi-discipline sup-
bined with creative, user friendly fittings and smart port system.
accessories, we are confident we have achieved our
goal to be Simply the Best!
Standard Cable Ladder and Cable Tray fittings are fabricated using SS angle plates
and SS bolt sets unless stated otherwise.
PHYSICAL PROPERTIES
Straight ladder section shall be pultruded
glass reinforced with a premium resin system:
a.
a Our Ladder and tray members are designed specifically to optimize the load capacity in form of a beam
section. This UNIQUE style has two important advantages, the first being the way our splice plates fits
flush and tightly between the flanges thus preventing the plate from slipping at time of installation. The
other is our patented rung to ladder attachment where the rung fits neatly between two flanges and
locked using our patented insert.
b.
b Rung to side rail members connections shall be connected by fire retardant composite locking clip. The
rung side rail mechanical connection shall resist both vertical shear and rung pullout.
c.
c The height of the rung is 24 mm to maximize cable installations.
d.
d All rungs have perforations along the length to aid easy installation of cables.
e.
e All sections can use Oglaend System ETIN™ tubing clamp and single or trefoil SmartCleats® and other
fixing accessories.
f.f Straight sections of ladder and tray are pre-drilled to accept connector plates.
g.
g All cut ends and drilled splice plate holes are sealed prior to goods leaving our manufacturing facilities.
14
FRP Typical Coupon Properties
Mechanical Proporties ASTM Units PE
Typical coupon properties of Tensile Stress, LW D-638 psi 30 000
Oglaend System Reinforced Tensile Stress, CW D-638 psi 7000
15
Effect on strength with temperature
The strength properties of reinforced plastics are reduced when the material is
continually exposed to high temperatures. Loading shall be reduced based on
the below table. Percentages shown are approximates.
Polyester Resin
Temperature
% of Strength
75°F (24°C) 100 %
100°F (38°C) 90 %
125°F (52°C) 78 %
150°F (66°C) 68 %
175°F (79°C) 60 %
200°F (93°C) 52 %
The test values in this chart are obtained from laboratory testing.
When high temperatures are present please consult the manufacturer for
application advice. Freezing temperatures do not effect the load rating of cable
ladders and the cable management system as the FRP material does not be-
come fragile. Special consideration is required when service temperatures are
over 200º Fahrenheit / 94º Celsius.
16
Chemical Exposure Chart
The data that is contained in this chart is based on information obtained from raw material suppliers.
Temperatures used are neither minimum nor maximum, but represent a cross section of test conditions.
The information stated is done so without guarantee, we advise that you evaluate this information and
suggest you test the material in your own laboratory or conduct actual field tests before use.
LEGEND:
Environment % Concentrate Temp °F Environment % Concentrate Temp °F
Acetic Acid 10 190 Lactic Acid SAT 170
Acetic Acid 50 125 Lead Acetate SAT 170
Aluminum Chlorine SAT 170 Lead Chloride SAT 140
Aluminum Hydroxide SAT 160 Lead Nitrate SAT
SAT - Saturated
Aluminum Nitrate SAT 150 Linseed Oil 100 150
Aluminum Sulfate SAT 180 Lithium Chloride SAT 150
Ammonium Chloride SAT 170 Magnesium Carbonate SAT 140
Ammonium Hydroxide 1 100 Magnesium Chloride SAT 170
Ammonium Hydroxide 28 Magnesium Hydroxide SAT 150
Ammonium Carbonate Magnesium Nitrate SAT 140
Ammonium Bicarbonate 15 125 Magnesium Sulfate SAT 170
Ammonium Nitrate SAT 160 Mercuric Chloride SAT 150
Ammonium Persulfate SAT Mercurous Chloride SAT 140
Not available
Ammonium Sulfate SAT 170 Mineral Oils 100 170
Amyl Alcohol ALL Naptha 100 140
Amyl Alcohol Vapor 140 Nickel Chloride SAT 170
Benzene Sulfonic Acid 25 110 Nickel Nitrate SAT 170
Benzonic Acid SAT 150 Nickel Sulfate SAT 170
Benzoly Alcohol 100 Nitric Acid 5 140
Borax SAT 170 Nitric Acid 20 70
Not recommended
Calcium Carbonate SAT 170 Oleic Acid 100 170
Calcium Chloride SAT 170 Oxalic Acid ALL 75
Calcium Hydroxide 25 70 Paper Mill Liquors 100
Calcium Nitrate SAT 180 Perchlorethylene 100
Calcium Sulfate SAT 180 Perchloric Acid
Carbon Disulfide Perchloric Acid
Carbonic Acid SAT 130 Phosphoric Acid 10 160
Carbon Dioxide Gas 200 Phosphoric Acid 100 120
Carbon Monoxide Gas 200
V - Vaporous
Potassium Aluminium Sulfate SAT 170
Carbon Tetrachloride
Chlorine, Dry Gas 140 Potassium Bicarbonate 50 80
Chlorine, Wet Gas Potassium Carbonate 10
Chlorine Water SAT Potassium Chloride SAT 170
Chromic Acid 5 70 Potassium Dichromate SAT 170
Citric Acid SAT 170 Potassium Hydroxide
Copper Chloride SAT 170 Potassium Nitrate SAT 170
Copper Cyanide SAT 170 Potassium Permangante SAT 75
Copper Nitrate SAT 170 Potassium Sulfate SAT 170
Crude Oil, Sour 100 170 Propylene Glycol ALL 170
Cyclohexane, Vapor ALL 100 Phthalic Acid
Diesel Fuel 100 160 Sodium Acetate SAT 160
Diethyl Ether Sodium Benzoate SAT 170
Dimethyl Phthalate Sodium Bicarbonate SAT 160
Ethanol 50 75 Sodium Bisulfate ALL 170
Ethyl Acetate Sodium Bromide ALL 170
Ethylene Chloride Sodium Carbonate 10 80
Ethylene Glycol 100 90 Sodium Chloride SAT 170
Fatty Acids SAT 180 Sodium Cyanide SAT 170
Ferric Chloride SAT 170 Sodium Hydroxide
Ferric Nitrate SAT 170 Sodium Hydroxide
Ferric Sulfate SAT 170 Sodium Hypochlorite
Ferrous Chloride SAT 170 Sodium Monophosphate SAT 170
Fluoboric Acid Sodium Nitrate SAT 170
Fluosilicic Acid Sodium Sulfate SAT 170
Formaldehyde 50 75 Sodium Thiosulfate ALL 100
Formic Acid Stannic Chloride SAT 160
Gasoline 100 80 Sulfated Detergent 0/50 170
Glucose 100 170 Sulfur Dioxide 100 80
Glycerine 100 150 Sulfur Trioxide 100 80
Heptane 100 110 Sulfuric Acid 93
Hexane 100 90 Sulfuric Acid 50
Hydrobromic Acid 50 120 Sulfuric Acid 25 75
Hydrobromic Acid 10 150 Sulfurous Acid 80
Hydrobromic Acid 20 140 Tartaric Acid 170
Hydrobromic Acid 37 75 Tetrachloroethylene
Hydrobromic Acid Toluene
Hydrogen Bromide, Dry 100 190 Trisodium Phosphate
Hydrogen Bromide, Wet 100 75 Urea SAT 130
Hydrogen Chloride 120 Vinegar 100 170
Hydrogen Peroxide 30 Water, Distilled 100 170
Hydrogen Sulfide, Dry 140 Water, Tap 100 170
Hydrogen Sulfide, Wet V 140 Water, Salt SAT 170
Hypochlorous Acid 10 70 Zinc Chloride SAT 170
Isopropyl Alcohol Zinc Nitrate SAT 170
Kerosene 100 140 Zinc Sulfate SAT 170
17
FRP Installation Guidelines
RECOMMENDED PROTECTIVE GEAR FRP products are inherently stable and safe to
handle. The dust created when cutting FRP can
however cause skin and respiratory irritation.
Helmet This is avoided using standard personal protec-
tive equipment as shown.
Safety Glasses
All installations must adhere to local, national, inter-
Dustmask national and branch health, safety and environmental
regulations. Unless appropriate safety measures are
Long-sleeve/
Overalls
taken, cutting and grinding operations can be hazard-
ous activities, with significant risk of personal injury or
installation damage. Any installation should be carried
out by competent persons according to planned work
schedules and appropriate safety measures must be
Gloves
taken to avoid hazardous situations. Always wear pro-
tective gear when cutting or grinding fiberglass. Even
though the dust created is non-toxic, it can still cause
skin irritations and itching.
WARNING!
Fiberglass products should not be used as
Safety Shoes a walkway, ladder or any type of support for
personnel. Our cable ladders and trays are
designed to be used as mechanical support
for cables and tubing only.
SELECTING THE RIGHT TOOLS • Use the offered Oglaend System drilling jigs in order
to perform proper productive and precise perforations.
• On-site cutting is easily done with the use of a circular
Do not use a profile member that has been perforated
power saw.
or damaged in wrong positions that may reduce it’s
• Diamond or carbide grit edged saw blades and carbide structural strength.
tip drill bits are best suited for fiberglass.
• Fiberglass is easy to work with and only requires regular
hand-tools for installation.
AFTER TREATMENT AND INSTALLATION
• From our extensive testing and on-site experience,
the quality of our FRP profiles are such that cut
CUTTING AND DRILLING ends and holes do not require sealant in most harsh
• When cutting, grinding or sanding fiberglass it is environments. The requirement for additional sealant
important to wear appropriate clothing to protect the applied to cut ends and holes should be considered by
operator. Safety glasses, dust mask and gloves are the specifier, engineering company or owner based on
necessary. their environmental evaluation, and specified as a scope
• We also recommend wearing a long-sleeved shirt or of work for the installation contractor.
overalls when working with fiberglass. Because the non- • When installing cable ladders or cable trays from
toxic dust that is created can cause skin irritations. The Oglaend System, ensure that you only use original parts,
amount of irritant varies among different individuals, and which make up part or all of the main support system.
is easily reduced or eliminated by wearing protective This includes for example splice plates, fittings, fixing
clothing. clamps and FRP supports. Using non Oglaend System
• Avoid excessive pressure when sawing or drilling, products will affect the loading performance and
because this force can wear down the tools. warranty of the whole system.
• Refrain from generating excessive heat in any sawing
or drilling operation. The heat can soften the resin and
produce a rough edge. Excessive heat will also burn the
resin and fibreglass.
• Provide rigid support for the profile material during To prolong the service life of the product it should be installed in
the cutting or drilling process. Movement may cause compliance with the standards set forth in the current version of
National Electric Code and NEMA Publications FG-1.
chipping at the profile edges.
18
INSTALLING CABLE LADDERS AND CABLE TRAYS CORRECTLY
In order to minimize deflection and maximize the safe working load, the cable ladders or cable
trays should be installed so that splice joints between horizontal runs sit at the quarter point of
the span as illustrated below.
Recommended
Not recommended
L/5 0.4L
Splice plated located
Support Span (L) L/2 L/2 L/5 from supports.
Loading ends at 0.4L
Deflection measured
here at midspan (L/2)
All our FRP cable ladders have been tested under the This is an international testing standard for cable trays
NEMA FG-1 mechanical loading specification. This is a and cable ladders. The safe working load obtained
certicate based testing standard. Grading occurs on a using these methods include with a safety factor of 1.7.
combined alphabetic (A-C) and numeric (8, 12, 16, 20) The products were tested under a worst case scenario
scales. The alphebetic grading denotes the max loading methodology i.e. maximum width and spans.
(UDL) and the numeric grading denotes the span dis-
tance in feet between supports.
19
FRP Reference List
Downer EDI SSJV Desalination Plant Australia FOE100 Ladder, Fittings HD Supports
BelWind Transformer Platform Belgium FOE Ladder, FTE Tray, FRP Support
London Array Transformer Platform Belgium FOE, FTE, FTE Antistatic, FRP Support
Semco Maritime Horns Rev 2 Accomodation Denmark FOE Ladders and FTE Trays
British Gas India Tapti project India FOE150 Ladders (Nema 20C)
Sime Darby Kumag Cluster Malaysia FOE150 Ladders, Fittings and FTE Trays
Siemens Norsk Hydro Norway FOE Ladders, FTE Trays and FRP Support
Helgevold Elektro Bremnes Seashore Norway FOE Ladders, FTE Trays and FRP Support
20
Bremnes Seashore
Hatchery, Norway.
21
F R P COMPOSI TE
S U P PORT SYSTE M
Oglaend System corrosion resistant glass fibre reinforced plastic (FRP/GRP) support channels are designed to
deliver weight reductions while maintaining strength and maximizing loading capability. The design delivers HSE
advantages when lifting and fitting Tray and Support equipment. The support channels are available in four dif-
ferent resins materials, each formulated to satisfy special project requirements. A wide range of practical, smart
and innovative accessories are also available to complement the system
MATERIALS 3D LIBRARIES
Article numbers are for standard FRP
polyester resin. For alternative resin types, AVEVA (E3D / PDMS)
add the resin code as a suffix to the article Hexagon (Intergraph Smart 3D)
FRP C1A number. For more information on resin Bentley
systems, please see the materials section
or refer to our website.
22
FRP support sections are available in a range of profiles and
designs, and are available with a wide range of standard and TABLE OF CONTENTS
specialised accessories in all FRP, and AISI 316L Stainless
Steel to suit many applications.
FRP Channel Selector............................................ 24
23
FRP Channel Selector
4 bolts 4 bolts
4 bolts 4 bolts
4 bolts
W H H
H
6 bolts 5 bolts
3 bolts 3 bolts W
W W
U-frame: Fitted back to back. L- and T-frame: Fitted back to back with connection piece. Cantilever: Starter bracket can
be used as drill jig.
4 bolts 4 bolts
4 bolts
per joint 4 bolts
H H
H
8 bolts 8 bolts
W W
W W
U-frame: Fitted back to back. L- and T-frame: Fitted back to back with gusset plate. Use gusset Cantilever: 4 bolt connection.
plate as drill jig for connection.
LOAD DATA
Support Width Height CH100 CH100S
The data is based on testing Configuration (mm) (mm) SWL (kg) SWL (kg)
generally according to IEC 61537
“Cable management – Cable 1000 1000 1100 1000
Tray systems and Cable Ladder
systems”. The safe working load
U-frame 1500 1000 - 900
(SWL) includes a safety factor of 1950 1000 766 733
3.0. Loadings are according to
specification from IEC 61537. 700 600 130 50
L-frame
900 975 80 -
1150 1000 766 566
T-frame*
1600 975 450 -
650 160 -
700 - 180
Cantilever
850 100 -
900 - 133
*Loads based on equal loading on both sides, total load on frame given above.
24
FRP Starter Bracket Summary
Welded Starter S-FRP FC-BC S-FRP FC-BC (Beam C) Bolted Starter Bracket S-FRP FC-BS
Art. no.: 73636C Art. no.: 73634 Art. no.: 73636
Fits beam widths 200-300 mm.
S-M WB-200-CH50-T/CH100-T SS Bolted Starter S-M BS-CH100-1 SS
Art. no.: 1301567 Art. no.: 1371707
SB-CH100-2T 200 and 300 S-M BS-CH100-2T SB-CH100-2T 200 and 300
Art. no.: 1301024 and 1302061 Art. no.: 1306908 - 3 mm thickness Art. no.: 1371425 and 1303358
Art. no.: 1306909 - 5 mm thickness
Welded starter is supplied complete with Art. no.: 84308 - 5 mm thickness (FoS) Bolted Starter, supplied with complete
brackets and bolt set. Available in 200 brackets and bolt set. For triangular channel.
and 300 mm lengths. 300 mm suitable for Bolted starter bracket with 3 fixing holes. Available in 200 and 300 mm lengths. 300
L-frame and 200 mm suitable for U-frame. Suitable for U-frame. A version with 5 fixing mm suitable for L-frame. 200 mm suitable
holes is also available. Adapted to use Hilti for U-frame.
fastening on steel. This bracket can be fitted
with X-BT HL threaded stud to provide a
post-paint solution to add support.
S-M WB-200-CH50-T/CH100-T SS
Art. no.: 1301567
25
FRP Channels
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
26
FRPStarterBrackets&Accessories
Fasteners SS
Type Description SS
included (kg)
Fasteners SS
Type Description SS
included (kg)
Fasteners SS
Type Description SS
included (kg)
Fasteners SS
Type Description SS
included (kg)
Fasteners SS
Type Description SS
included (kg)
SS
Type Description SS (kg)
27
Beam Clamps for FRP
Beam Clamps for FRP
Starter Bracket suitable for use with beams 200-300 mm wide.
Fasteners SS
Type Description SS
included (kg)
Fasteners FRP
Type Description FRP
included (kg)
Fasteners FRP
Type Description FRP
included (kg)
SS
Type Description SS (kg)
79962
79961
28
FRPUNOChannels&Accessories
FRP
Type Description FRP (kg)
U-43 Single
FRP Support Profile. Size: 43 x 43 x 4 mm, 6 m length.
FRP
Type Description FRP (kg)
U-43 Double
FRP Support Profile. Size: 43 x 86 x 4 mm, 6 m length.
FRP
Type Description FRP (kg)
29
FRP UNO Accessories
Square Plate Washer
Square washer for fitting over UNO profiles for attaching bolts or
threaded rod.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
30 All FRP UNO brackets are designed to work with M10 bolt sets (with the exception of 71306).
3+3 Hole Wide Angle Bracket
Wide angle bracket for connecting UNO sections together. 3 + 3 holes.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
Cross Bracket
Cross bracket for connecting UNO sections together.
FRP
Type Description FRP (kg)
Flat L-Bracket
Flat L-shaped UNO bracket for connecting UNO sections together.
3 holes.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
All FRP UNO brackets are designed to work with M10 bolt sets (with the exception of 71306). 31
Flat T-Bracket 45º
Flat T-shaped 45° angle UNO bracket for connecting UNO sections
together. 2 + 2 holes.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
SS
Type Description SS (kg)
SS
Type Description SS (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
32 All FRP UNO brackets are designed to work with M10 bolt sets (with the exception of 71306).
FRPMiscellaneous&Fasteners
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
Threaded Rod
Threaded Rod. M10 size.
FRP
Type Description FRP (kg)
33
FRP UNO Fasteners
FRP UNO Bolts
FRP bolts suitable for use with UNO FRP channel nuts.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
34
35
F O E COMP OSI TE
CAB L E L ADDE R SYSTE M
Oglaend System corrosion resistant glass fibre reinforced plastic (FRP/GRP) cable ladders
are designed to deliver weight reductions while maintaining strength and maximizing loading
capability. The design delivers HSE improvements when lifting and fitting ladder and support
equipment. Cable ladders are available in different resin materials, each formulated to satisfy
special project requirements.
CABLE TRAYS
FOE200 also
available on
request.
FOE70 FOE100 FOE150 GA FOE150 HD
Siderail height 70 mm Siderail height 100 mm GA = General Application HD = Heavy Duty
LOAD DATA
36
DIFFERENT HEIGHTS (MM):
Different ladder heights to give more choice for loading TABLE OF CONTENTS
space availability. Designed with unique I-beam for superior
loading capacity.
FOE Smart Features............................................... 38
h: 150 h: 150
FOE70 Cable Ladder System
FOE70 Cable Ladder System................................. 39
h: 100
FOE70 Fittings........................................................ 39
h: 70
FOE70 Fixings......................................................... 43
FOE100 Fittings...................................................... 45
FOE150 Fittings....................................................... 53
FOE150 Fixings....................................................... 58
FOE Accessories.................................................... 62
37
FOE Smart Features
PERFORATED RUNG DESIGN
Standard widths range from 150-900 mm. This allows for our high volta-
ble cable cleats SmartCleat® to be easily installed. ETIN™ tubing clamps
can also be installed. Flexible rung attachment allows additional rungs to
be installed.
C-profile advantages; increased loading complete with perforations, pro-
hibits liquid entrapment, long maintenance service life, range of smart-
loks available to meet different requirements, rung widths and rung spac-
ing can be customized to project requirements on application.
LADDER SIDERAIL
Ladder Siderail has unique off centre side profiles. Easy installation and
secure fitting of splice plates. Increased load capacity at splice location.
Roll edges for easy handling. Trim edge, reduces cable snagging, role
over and aids stability to reduce rung movement.
SPLICE CONNECTORS
Full height splice and joint connectors with A4 quality bolt sets which
can handle the same loadings as the ladder system itself. The products
are delivered with perforations for use with splice connectors predrilled.
DRILL JIG
Smart Jig available for easy and accurate drilling.
FLEXIBLE RISER
Allows user to change between inside or outside riser (simply
remove then invert the splice angle plate).
The bolts used to interlock the sections are also used to install the HD
Cover fixing clamp. Covers for fittings are supplied as a single flat cover.
38
FOE70 Cable Ladder System
FRP
Type Description FRP (kg)
FOE70 Fittings
90º Flat Elbows
Compact design Flat Elbow in radius 300 mm.
(For more radius options please contact us.)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
39
Tee-Piece
Compact design Tee-Piece in radius 300 mm.
(For more radius options and for unequal fittings please contact us.)
FRP
Type Description FRP (kg)
Cross-Piece
Compact design Cross-Piece in radius 300 mm.
(For more radius options and for unequal fittings please contact us.)
FRP
Type Description FRP (kg)
Riser Part
Riser Link which can be combined with Angle Plates and additional
Riser Links to create required configurations.
FRP
Type Description FRP (kg)
40
Inside Fixed Riser 90º. Radius 400 mm
Fixed angle Inside Riser piece. Compact design. Preassembled in
composite system. Exact radius 409 mm.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
41
Outside Fixed Riser 90º. Radius 400 mm
Fixed angle Outside Riser. Compact design. Preassembled in
composite system. Exact radius 393 mm.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
42
FOE70 Fixings
Splice plates are delivered in a set for one side of each ladder, complete
with bolts as shown. Two sets are therefore required for a ladder connection.
All standard splice connectors in both SS and FRP material are supplied
with SS fasteners.
Splice Connector
Splice Connector for connecting Cable Ladders and Fittings.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Hinge Vertical
Vertical Hinge for FOE Cable Ladders in two types. The heavy duty
SS version can be locked in place in increments of 4º.
Fasteners SS
Type Description SS FRP
included (kg)
Reducer Part
Part for increasing or reducing Cable Ladder width in set
increments. Universal design which can be used for left or right side
independently or both sides together. When fitting on just one side,
one additional splice connector is required (ordered separately).
FRP
Type Description FRP (kg)
43
End Cover
End Cover to close the end of the Cable Ladder.
Provides a tidy finish.
FRP
Type Description FRP (kg)
Dividers
Divider for FOE-70 Cable Ladder. Supplied in 3 m lengths.
Dividers are used for separation and segregation of different
systems.
Fasteners FRP
Type Description FRP
included (kg)
44
FOE100 Cable Ladder System
FOE100 Fittings
90º Flat Elbows
11111
45
45º Flat Elbows
11111
FOE-100 FE-45-150 R300 74624 2,5 FOE-100 FE-45-150 R600 73124 3,4
FOE-100 FE-45-300 R300 74625 2,9 FOE-100 FE-45-300 R600 73125 3,9
FOE-100 FE-45-450 R300 74626 3,7 FOE-100 FE-45-450 R600 73126 4,3
FOE-100 FE-45-600 R300 74627 4,3 FOE-100 FE-45-600 R600 73127 4,9
FOE-100 FE-45-750 R300 74628 4,8 FOE-100 FE-45-900 R600 73129 5,9
FOE-100 FE-45-900 R300 74629 5,3 FOE-100 FE-45-750 R600 73128 5,4
Tee-Piece
11111
FOE-100 TE-150/150 R300 74506 5,9 FOE-100 TE-150/150 R600 73142 8,8
FOE-100 TE-300/300 R300 74507 6,7 FOE-100 TE-300/300 R600 73143 10,0
FOE-100 TE-450/450 R300 74508 7,8 FOE-100 TE-450/450 R600 73144 11,5
FOE-100 TE-600/600 R300 74509 9,0 FOE-100 TE-600/600 R600 73145 12,9
FOE-100 TE-750/750 R300 74510 10,4 FOE-100 TE-750/750 R600 73146 14,8
FOE-100 TE-900/900 R300 74511 11,4 FOE-100 TE-900/900 R600 73147 15,9
Cross-Piece
11111
FOE-100 CP-150/150 R300 70314 8,1 FOE-100 CP-150/150 R600 71784 12,3
FOE-100 CP-300/300 R300 70315 8,9 FOE-100 CP-300/300 R600 71785 13,6
FOE-100 CP-450/450 R300 70316 10,1 FOE-100 CP-450/450 R600 71786 15,2
FOE-100 CP-600/600 R300 70317 11,2 FOE-100 CP-600/600 R600 71787 16,7
FOE-100 CP-750/750 R300 70318 12,6 FOE-100 CP-750/750 R600 71788 18,5
FOE-100 CP-900/900 R300 70319 13,6 FOE-100 CP-900/900 R600 71789 19,9
46
Riser Part
Riser Link which can be combined with Angle Plates and additional
Riser Links to create required configurations.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
47
Outside Fixed Riser 90º. Radius 400 mm
Fixed angle Outside Riser piece. Compact design. Preassembled in
composite system. Exact radius 393 mm.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
48
Reducer Right
Part for reducing cable ladder width in set increments from one side.
FRP
Type Description FRP (kg)
Reducer Left
Part for reducing cable ladder width in set increments from one side.
FRP
Type Description FRP (kg)
Reducer Central
Part for reducing cable ladder width equally from both sides in set increments.
FRP
Type Description FRP (kg)
49
FOE100 Fixings
Splice plates are delivered in a set for one side of each ladder, complete
with bolts as shown. Two sets are therefore required for a ladder connection.
All standard splice connectors in both SS and FRP material are supplied
with SS fasteners.
Splice Connector
Splice Connector for connecting Cable Ladders and Fittings.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Hinge Vertical
Vertical Hinge for FOE Cable Ladders in two types. The heavy duty
SS version can be locked in place in increments of 4º.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
50
Reducer Part
Part for increasing or reducing Cable Ladder width in set
increments. Universal design which can be used for left or right side
independently or both sides together. When fitting on just one side,
one additional splice connector is required (ordered separately).
FRP
Type Description FRP (kg)
End Cover
End Cover to close the end of the Cable Ladder. Provides a tidy
finish.
FRP
Type Description FRP (kg)
Dividers
Divider for FOE100 Cable Ladder. Supplied in 3 m lengths.
Dividers are used for separation and segregation of different
systems.
Fasteners FRP
Type Description FRP
included (kg)
51
FOE150 Cable Ladder System
FRP
Type Description FRP (kg)
52
FOE150 Fittings
90º Flat Elbow
11111
FOE-150 FE-90-150 R300 74612 6,9 FOE-150 FE-90-150 R600 73112 10,2
FOE-150 FE-90-300 R300 74613 8,0 FOE-150 FE-90-300 R600 73113 11,4
FOE-150 FE-90-450 R300 74614 9,9 FOE-150 FE-90-450 R600 73114 12,7
FOE-150 FE-90-600 R300 74615 11,2 FOE-150 FE-90-600 R600 73115 14,6
FOE-150 FE-90-750 R300 74616 12,5 FOE-150 FE-90-750 R600 73116 15,9
FOE-150 FE-90-900 R300 74617 13,7 FOE-150 FE-90-900 R600 73117 17,2
53
Tee-Piece
11111
FOE-150 TE-150/150 R300 74512 10,2 FOE-150 TE-150/150 R600 73148 15,7
FOE-150 TE-300/300 R300 74513 11,1 FOE-150 TE-300/300 R600 73149 17,0
FOE-150 TE-450/450 R300 74514 12,8 FOE-150 TE-450/450 R600 73150 18,8
FOE-150 TE-600/600 R300 74515 14,4 FOE-150 TE-600/600 R600 73151 20,7
FOE-150 TE-750/750 R300 74516 16,1 FOE-150 TE-750/750 R600 73152 22,8
FOE-150 TE-900/900 R300 74517 17,1 FOE-150 TE-900/900 R600 73153 24,4
Cross Piece
11111
FOE-150 CP-150/150 R300 70320 14,0 FOE-150 CP-150/150 R600 71676 21,4
FOE-150 CP-300/300 R300 70321 15,0 FOE-150 CP-300/300 R600 71677 22,8
FOE-150 CP-450/450 R300 70322 16,2 FOE-150 CP-450/450 R600 71678 24,5
FOE-150 CP-600/600 R300 70323 17,4 FOE-150 CP-600/600 R600 71679 26,1
FOE-150 CP-750/750 R300 70324 18,9 FOE-150 CP-750/750 R600 71680 28,0
FOE-150 CP-900/900 R300 70325 20,1 FOE-150 CP-900/900 R600 71681 29,6
Riser Part
Riser Link which can be combined with Angle Plates and additional
Riser Links to create required configurations. Preassembled in
composite system.
FRP
Type Description FRP (kg)
54
Inside Fixed Riser 90º. Radius 400 mm
Fixed angle Inside Riser piece. Compact design. Preassembled in
composite system. Exact radius 482 mm.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
55
Outside Fixed Riser 90º. Radius 600 mm
Fixed angle Outside Riser piece. Compact design. Preassembled in
composite system. Exact radius 591 mm.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
Reducer Right
Part for reducing Cable Ladder width in set increments from one
side.
FRP
Type Description FRP (kg)
56
Reducer Left
Part for reducing Cable Ladder width in set increments from one
side.
FRP
Type Description FRP (kg)
Reducer Central
Part for reducing Cable Ladder width equally from both sides in set
increments.
FRP
Type Description FRP (kg)
57
FOE150 Fixings
Splice plates are delivered in a set for one side of each ladder, complete
with bolts as shown. Two sets are therefore required for a ladder connection.
All standard splice connectors in both SS and FRP material are supplied
with SS fasteners.
Splice Connector
Splice Connector for connecting Cable Ladders and Fittings.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Hinge Vertical
Vertical Hinge for FOE Cable Ladders.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
58
Reducer Part
Part for increasing or reducing Cable Ladder width in set
increments. Universal design which can be used for left or right side
independently or both sides together. When fitting on just one side,
one additional splice connector is required (ordered separately).
FRP
Type Description FRP (kg)
End Cover
End Cover to close the end of the Cable Ladder. Provides a tidy
finish.
FRP
Type Description FRP (kg)
Divider
Divider for FOE-150 Cable Ladder. Supplied in 3 m lengths.
Dividers are used for separation and segregation of different
systems.
Fasteners FRP
Type Description FRP
included (kg)
59
FOE Cover & Accessories
FOE Cover
Cover Straight
Flat cover for the FOE100 and FOE150 cable ladder system. Covers
are supplied in 3 m lengths, consisting of 4 interlocking sections.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
60
Cover FOE Tee-Piece. Radius 300 mm
Flat cover for the FOE100 and FOE150 cable ladder system.
(For more radius options or for unequal cover please contact us.)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
Cover Riser
Riser cover for the FOE100 and FOE150 cable ladder system. For
Radius R400, 1 x cover are required. For Radius R600, 2 x cover are
required. For Radius R800, 3 x cover are required.
FRP
Type Description FRP (kg)
61
FOE Cover Clamps
HD Cover Fixing Clamp FOE
Heavy duty cover clamp for straight sections of cable ladder cover.
Utilizes bolt set that it supplied as part of straight cover.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
FRP/SS
Type Description FRP/SS (kg)
FOE Accessories
Smart Jig
With this jig you can pre-drill holes in exact positions when cutting
cable ladder lengths on-site. After modifications use Oglaend System
Sealing Kit to preserve the product quality.
SS
Type Description SS (kg)
62
Fixing Clamp
Fixing Clamp which fits both ladders and trays. Used for vertical or
horizontal installations.
Fasteners SS
Type Description SS FRP
included (kg)
Expansion Clamp
Fixing clamp suitable for all cable ladder heights. Used for horizontal
installations. Compatible with M10 fasteners.
Fasteners FRP
Type Description FRP
included (kg)
Rung FOE70
Punched rung for use with FOE70 cable ladders. Rung supplied
complete with Smartlok insert and SS bolts.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
SmartCleat Adapter
Adapter for fixing SmartCleats to FOE rungs. Produced in FRP.
FRP
Type Description FRP (kg)
Exit Plate
Exit plate for cable ladders.
FRP
Type Description FRP (kg)
63
F T E COMPOSI TE
CAB LE TRAY SYSTE M
Oglaend System corrosion resistant fibre reinforced plastic FRP cable trays are
designed to deliver weight reductions while maintaining strength and maximising
loading capability. The design delivers HSE improvements when lifting and fitting
tray and support equipment. The cable trays are available in five different resin
materials, each formulated to satisfy special project requirements.
CABLE TRAYS
FTE50 FTE80
LOAD DATA
64
DIFFERENT HEIGHTS (MM):
Different tray heights to give more choice for loading TABLE OF CONTENTS
space availability. Designed with unique I-beam for
superior loading capacity.
FTE Smart Features................................................ 66
h: 80 h: 50
FTE50 Cable Tray System
FTE50 Cable Tray System...................................... 67
FTE50 Fittings......................................................... 67
AVAILABLE WIDTHS (MM):
FTE50 Fixings......................................................... 69
50
100
150
FTE80 Cable Tray System
200 FTE80 Cable Tray System...................................... 71
300
FTE80 Fittings......................................................... 71
400
600 FTE80 Fixings......................................................... 73
FTE Accessories..................................................... 78
PRE-SLOTTED TRAY
Saves drilling time. Compatible
with ETIN™ Tubing Clamp.
65
FTE Smart Features
PERFORATED TRAY DESIGN
Perforations prohibit any liquid or chemical entrapment thus offering a
long service life. Rounded edges for easy handling. Unique off centre
beam profile design with increased load capacity that also reduces de-
flection.
SPLICE CONNECTORS
Full height splice and joint connectors can handle the same loadings as
the tray system itself. Products are delivered with perforations for use
with splice connectors predrilled.
DRILL JIG
Smart jigs for easy and accurate drilling of perforations.
FLEXIBLE RISER
Flexible Riser, allows user to change between inside or outside riser.
(simply remove then invert the splice angle plate).
66
FTE50 Cable Tray System
FRP
Type Description FRP (kg)
FTE50 Fittings
90º Flat Elbow
Compact design Flat Elbow in composite system. Radius 250 mm.
(For more radius options please contact us.)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
67
Tee-Piece
Compact design Tee-Piece in composite system.
FRP
Type Description FRP (kg)
Radius Tee-Piece
Compact design Tee-Piece with 300 mm radius in composite system.
(For more radius options please contact us.)
FRP
Type Description FRP (kg)
Combi Riser
Fixed 90º riser in composite system with splice plates in stainless
steel. The splice plates can be rotated to create inside or outside
risers.
Standard radius 40 0mm. (For more radius options please contact
us.)
FRP
Type Description FRP (kg)
68
Reducer
Part for increasing or reducing Cable Tray width in set increments.
Universal design which can be used for left or right side
independently or both sides together. When fitting on just one side,
one additional splice connector is required (ordered separately).
FRP
Type Description FRP (kg)
FTE50 Fixings
Splice plates are delivered in a set for one side of each tray, complete
with bolts as shown. Two sets are therefore required for a tray connection.
All standard splice connectors in both SS and FRP material are supplied
with SS fasteners.
Splice Connector
Straight Splice Connectors used to connect lengths of FTE50 Cable
Tray.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners FRP
Type Description FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
69
Hinge Vertical
Vertical Hinge connector. Allows for flexible riser configurations.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
End Cover
The End Cover provides a tidy end point on the Cable Tray run.
FRP
Type Description FRP (kg)
Divider
Divider for FTE50 Cable Tray. Dividers are used for separation and
segregation of different systems.
Fasteners FRP
Type Description FRP
included (kg)
Fasteners SS
Type Description SS
included (kg)
70
FTE80 Cable Tray System
FRP
Type Description FRP (kg)
FTE80 Fittings
90º Flat Elbow
Compact design Flat Elbow in composite system. Radius 250 mm.
(For more radius options please contact us.)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
71
Tee-Piece
Compact design Tee-Piece in composite system.
FRP
Type Description FRP (kg)
Radius Tee-Piece
Compact design Tee-Piece with 300 mm radius in composite system.
(For more radius options please contact us.)
FRP
Type Description FRP (kg)
Combi Riser
Fixed 90º riser in composite system with splice plates in stainless
steel. The splice plates can be rotated to create inside or outside
risers.
Standard radius 400 mm. (For more radius options please contact us)
FRP
Type Description FRP (kg)
72
Reducer
Part for increasing or reducing Cable Tray width in set increments.
Universal design which can be used for left or right side
independently or both sides together. When fitting on just one side,
one additional splice connector is required (ordered separately).
FRP
Type Description FRP (kg)
FTE80 Fixings
Splice plates are delivered in a set for one side of each tray, complete
with bolts as shown. Two sets are therefore required for a tray connection.
All standard splice connectors in both SS and FRP material are supplied
with SS fasteners.
Splice Connector
Straight Splice Connectors used to connect lengths of FTE80 Cable
Tray.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners FRP
Type Description FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
73
Hinge Vertical
Vertical Hinge connector, allows for flexible riser configurations.
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
Fasteners SS
Type Description SS FRP
included (kg)
End Cover
The end cover provides a tidy end point on the cable tray run.
FRP
Type Description FRP (kg)
Divider
Divider for FTE80 Cable Tray.
Dividers are used for separation and segregation of different
systems.
Fasteners FRP
Type Description FRP
included (kg)
Fasteners SS
Type Description SS
included (kg)
74
FTE Cover & Accessories
FTE Cover
Cover Straight
Flat cover for the FTE cable tray system with snap-lock system
for widths up to 300 mm. For widths over 300 mm or for exposed
locations, cover clamps are required.
FRP
Type Description FRP (kg)
90º Cover
Flat cover for the FTE cable tray system with snap-lock system
for widths up to 300 mm. For widths over 300 mm or for exposed
locations, cover clamps are required. Radius 250 mm. (For more
radius options please contact us.)
FRP
Type Description FRP (kg)
45º Cover
Flat cover for the FTE cable tray system with snap-lock system
for widths up to 300 mm. For widths over 300 mm or for exposed
locations, cover clamps are required. Radius 420 mm. (For more
radius options please contact us.)
FRP
Type Description FRP (kg)
75
Tee Cover
Flat cover for the FTE cable tray system with snap-lock system
for widths up to 300 mm. For widths over 300 mm or for exposed
locations, cover clamps are required.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
76
FTE Cover Clamps
Cover Clip FTE50
Quick and easy clip-on cover clamp.
SS
Type Description SS (kg)
SS
Type Description SS (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
Fasteners FRP
Type Description FRP
included (kg)
77
FTE Accessories
FRP Step Down Splice Plate
Stepped Splice Connector for connecting FTE cable trays in 50 and
80 mm heights.
Fasteners SS
Type Description SS
included (kg)
SS
Type Description SS (kg)
Fixing Clamp
Fixing Clamp which fits both ladders and trays. Used for vertical or
horizontal installations.
Fasteners SS
Type Description SS FRP
included (kg)
Smart Jig
With this jig you can pre-drill holes in exact positions when cutting
tray lengths on site.
Please refer to our recommendations on sealing following cutting and
drilling processes.
SS
Type Description SS (kg)
Fasteners SS
Type Description SS
included (kg)
78
79
NUT S , BOLTS
AND FAS TENER S
FLANGE NUTS
Our unique all metal flange nuts stay securely tightened without
the need for washers, nylon nuts or thread locking compounds.
The key to the system is advanced technology in the thread de-
sign, which restricts movement between the nut and bolt during
vibration, thus reducing loosening.
Installation time is reduced as the flange nuts are free running onto
bolts with no resistance, and are then tightened with one hand MATERIALS
and one tool. This also greatly reduces the chance for dropped
objects during installation. Furthermore, the flange nut has the SS FRP
washer included which reduces the inventory of parts required.
This improves logistics, reduces costs and ensures correct fitment
SS = A4-70 (Hex A4-80)
on the bolt. FRP = Polyester resin
REFERENCE GUIDE
As a quick reference guide, our best selling fasteners are shown below:
Hexagonal screws:
Flange Nut S-M NU-FL-M10 A4 1371973
1371330, 1371327 & 81396
SPECIAL SCREWS FOR FRP PRODUCTS: Please also study the following page.
Nut & Bolt S-M PS-M10 x 25 A4 FOE150 and FOE100 Splice Plates 74139
Nut & Bolt S-M S-NU-M6 x16 A4 FTE Splice Plates and FOE Cover 74140
80
FRP Fasteners
FRP Bolt M6
High strength FRP bolt.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP Nuts
High strength FRP nut.
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
FRP
Type Description FRP (kg)
81
A CCESS ORIES
ETIN™ Tubing Clamps
ETIN™ tubing clamps are quick and easy to install and are
fully compatible with our standard cable trays and ladders.
They are compact in design, and can be stacked and stagge-
red to maximize the fitting space available.
82
CO N TAC T
HOLDING COMPANY
Øglænd Industrier AS Phone: +47 51 78 81 00 For more contact information visit:
P.O. Box 133 E-mail: oglaend@oglaend-system.com www.oglaend-system.com/contact
NO-4358 Kleppe, Norway www.oglaend-system.com
MANUFACTORING COMPANIES
This network ensures flexibility and short delivery time to consistently meet
and exceed customers expectations and demands.
Factory
Agents
Oglaend System develop, manufacture and sell multidiscipline support solutions,
cable trays and cable ladders to the following industries worldwide: Oil & Gas,
Infrastructure, Ship building, Wind Energy, Water Treatment, Marine Farming and
many other industries.
These solutions deliver added value through reduced installation time, maximized
volume utilisation, weight reductions, enhanced lifetime integrity and improved
safety performance