SDS ANA Buffer Solution PH 10 00 EN 18030107
SDS ANA Buffer Solution PH 10 00 EN 18030107
SDS ANA Buffer Solution PH 10 00 EN 18030107
1.2. Relevant identified uses of the substance or mixture and uses advised against
Version GHS 2
In accordance with Regulation (EC) No. 1272/2008, the product does not need to be classified nor
labelled.
Additional information For the full text of the phrases mentioned in this Section, see
Section 16.
2.2. Label elements
3.2. Mixtures
Buffer solution.
Components CLP Classification Product identifier
CAS-No.: 7732-18-5
Deionised water 95% - 99%
EC-No.: 231-791-2
Skin Corr. 1A H314 CAS-No.: 1310-73-2
0.1% - [CSk1A: C ≥ 5 % ¦ CSk1B: 2 % ≤
Sodium hydroxide; caustic soda EC-No.: 215-185-5
0.5% C < 5 % ¦ CSk2: 0,5 % ≤ C < 2
% ¦ CEy2: 0,5 % ≤ C < 2 %] Index-No: 011-002-00-6
For the full text of the phrases mentioned in this Section, see Section 16.
Hazardous impurities None known.
Skin contact Wash off immediately with soap and plenty of water while removing
all contaminated clothes and shoes. If skin irritation persists, call a
physician.
Eye contact Rinse thoroughly with plenty of water, also under the eyelids. If eye
irritation persists, consult a specialist.
4.2. Most important symptoms If you feel unwell, seek medical advice (show the label where
and effects, both acute and possible).
delayed
Suitable extinguishing media Use water spray, alcohol-resistant foam, dry extinguishing agent or
carbon dioxide.
5.2. Special hazards arising from The product is not flammable. Use extinguishing measures that are
the substance or mixture appropriate to local circumstances and the surrounding
environment. Collect contaminated fire extinguishing water
separately. This must not be discharged into drains.
Special protective equipment for Standard procedure for chemical fires. In the event of fire, wear
firefighters self-contained breathing apparatus. Wear protective suit.
Advice for non-emergency Ensure adequate ventilation. Use personal protective equipment.
personnel Sweep up to prevent slipping hazard. Avoid contact with skin and
eyes. Do not breathe vapours/dust.
Advice for emergency Handle in accordance with good industrial hygiene and safety
responders practice. Use personal protective equipment. Sweep up to prevent
slipping hazard.
6.2. Environmental precautions Do not flush into surface water or sanitary sewer system.
6.3. Methods and material for Soak up with inert absorbent material. Keep in suitable and closed
containment and cleaning up containers for disposal.
7.1. Precautions for safe Wear personal protective equipment. Avoid contact with skin and
handling eyes.
7.2. Conditions for safe storage, Store at room temperature in the original container.
including any incompatibilities
Appropriate engineering controls Avoid contact with skin, eyes and clothing.
Hand protection The selected protective gloves have to satisfy the specifications of
EU Directive 89/686/EEC and the standard EN 374 derived from it.
Solvent-resistant gloves (butyl-rubber)
Appearance Liquid.
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Regulatory Information In accordance with Regulation (EC) No. 1272/2008 (CLP), the
product does not need to be classified nor labelled.
Revision Note Safety datasheet sections which have been updated: 1-16.
Key or legend to abbreviations CLP: Classification according to Regulation (EC) No. 1272/2008
and acronyms (GHS)
Key literature references and Information taken from reference works and the literature.
sources for data
Full text of phrases referred to H314: Causes severe skin burns and eye damage.
under sections 2 and 3
Disclaimer The information provided in this Safety Data Sheet is correct to the
best of our knowledge, information and belief at the date of its
publication. The information given is designed only as a guidance
for safe handling, use, processing, storage, transportation, disposal
and release. It is not to be considered a warranty or quality
specification.