Manual h97 Asrock

Preface
Z97 GUARD-PRO
H97 GUARD-PRO
Motherboard
G52-79231X1
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
Preface
continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks in this manual are properties of their respective owners.
￭ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
￭ NVIDIA® is registered trademark of NVIDIA Corporation.
￭ ATI® is registered trademark of AMD Corporation.
￭ AMD® is registered trademarks of AMD Corporation.
￭ Intel® is registered trademarks of Intel Corporation.
￭ Windows® is registered trademarks of Microsoft Corporation.
￭ AMI® is registered trademark of American Megatrends Inc.
￭ Award® is a registered trademark of Phoenix Technologies Ltd.
￭ Sound Blaster® is registered trademark of Creative Technology Ltd.
￭ Realtek® is registered trademark of Realtek Semiconductor Corporation.
￭ JMicron® is registered trademark of JMicron Technology Corporation.
￭ Netware® is registered trademark of Novell, Inc.
￭ Lucid® is trademark of LucidLogix Technologies, Ltd.
￭ VIA® is registered trademark of VIA Technologies, Inc.
￭ ASMedia® is registered trademark of ASMedia Technology Inc.
￭ iPad, iPhone, and iPod are trademarks of Apple Inc.
￭ Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.
Revision History
Revision Revision History Date
V1.0 First release 2014/04
Preface ii
Smartphone Application
MSI+ is a smart web gadget that works as a shopping navigator and
provides specs comparison for IT buyers. With a simple tap of the
smartphone, you'll efficiently locate your ideal products from a wide
Preface
variety of choices and, if product details are required, you may easily
download user manuals within minutes. Better yet, the power calculator
provides accurate estimates of power unit capacity for DIY users.
Technical Support
If a problem arises with your system and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively,
please try the following help resources for further guidance.
Visit the MSI website for technical guide, BIOS

updates, driver updates, and other information:
http://www.msi.com/service/download/
Contact our technical staff at:

http://register.msi.com/
iii Preface
Safety Instructions
￭ Always read the safety instructions carefully.
￭ Keep this User’s Manual for future reference.
￭ Keep this equipment away from humidity.
Preface
￭ Lay this equipment on a reliable flat surface before setting it up.

￭ The openings on the enclosure are for air convection hence protects the equipment
from overheating. DO NOT COVER THE OPENINGS.
￭ Make sure the voltage of the power source is at 110/220V before connecting the
equipment to the power inlet.
￭ Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
￭ Always Unplug the Power Cord before inserting any add-on card or module.
￭ All cautions and warnings on the equipment should be noted.
￭ Never pour any liquid into the opening that can cause damage or cause electrical
shock.
￭ If any of the following situations arises, get the equipment checked by service
personnel:
◯ The power cord or plug is damaged.
◯ Liquid has penetrated into the equipment.
◯ The equipment has been exposed to moisture.
◯ The equipment does not work well or you can not get it work according to
User’s Manual.
◯ The equipment has been dropped and damaged.
◯ The equipment has obvious sign of breakage.
￭ DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC (140oF),
IT MAY DAMAGE THE EQUIPMENT.
Preface iv
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Preface
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
measures listed below.
◯ Reorient or relocate the receiving antenna.
◯ Increase the separation between the equipment and receiver.
◯ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
◯ Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply
with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7923
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may
cause undesired operation.
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device is
in compliance with the essential safety requirements and other relevant
provisions set out in the European Directive.
Preface
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment and its antenna should be installed and
operated with minimum distance 20 cm between the radiator and your body. This
Preface
equipment and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.
European Community Compliance Statement

The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public
to electromagnetic fields (0–300GHz). This wireless device complies with the R&TTE
Directive.
Taiwan Wireless Statements

無線設備警告聲明
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻
率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立
即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線
電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之
干擾。
警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在
這種情況下，使用者會被要求採取某些適當的對策。
Japan VCCI Class B Statement

クラス B 情報技術装置
この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ
スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して
使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正しい
取り扱いをしてください。
Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음
Preface vi
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed of
as unsorted household waste. Please use the public collection system
Preface
to return, recycle, or treat them in compliance with the local regulations.
Taiwan:
For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.
廢電池請回收
California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.
Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.html
vii Preface
WEEE (Waste Electrical and Electronic Equipment) Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must
Preface
remind you that...

Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on August
13, 2005, products of “electrical and electronic equipment” cannot be
discarded as municipal wastes anymore, and manufacturers of covered
electronic equipment will be obligated to take back such products at the end of their
useful life. MSI will comply with the product take back requirements at the end of life
of MSI-branded products that are sold into the EU. You can return these products to
local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen
Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden.
MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt,
die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines
Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement
électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005,
que les produits électriques et électroniques ne peuvent être déposés dans les
décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements
seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte
cette exigence relative au retour des produits en fin de vie au sein de la communauté
européenne. Par conséquent vous pouvez retourner localement ces matériels dans
les points de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13
августа 2005 года, изделия, относящиеся к электрическому и электронному
оборудованию, не могут рассматриваться как бытовой мусор, поэтому
производители вышеперечисленного электронного оборудования обязаны
принимать его для переработки по окончании срока службы. MSI обязуется
соблюдать требования по приему продукции, проданной под маркой MSI на
территории EC, в переработку по окончании срока службы. Вы можете вернуть
эти изделия в специализированные пункты приема.
Preface viii
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o
equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos
Preface
clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en
los contenedores habituales de su municipio, los fabricantes de equipos electrónicos,
están obligados a hacerse cargo de dichos productos al termino de su período de
vida. MSI estará comprometido con los términos de recogida de sus productos
vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar
estos productos en el punto limpio establecido por el ayuntamiento de su localidad o
entregar a una empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan
kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort
producten worden verplicht om producten retour te nemen aan het eind van hun
levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten
die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen
geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj
sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi,
Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji
spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan
otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju
njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih
proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU.
Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI
przypomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów
elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13
sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie
mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów
będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z
użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie
Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w
wyznaczonych punktach zbiorczych.
ix Preface
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC
Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere,
Preface
elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik

cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla
yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri
bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi
yerel toplama noktalarına bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické
výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které
se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení
jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky
MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete
odevzdat v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve
az MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos
és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint
az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági
hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az
ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a
termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n
belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket
a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici
ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti
alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati
come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni
prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i
prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine
del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta
Preface
▍ Contents
Preface�� i
Copyright Notice��ii
Preface
Trademarks��ii
Revision History��ii
Smartphone Application��iii
Technical Support��iii
Safety Instructions��iv
FCC-B Radio Frequency Interference Statement�� v
CE Conformity�� v
Radiation Exposure Statement��vi
European Community Compliance Statement��vi
Taiwan Wireless Statements��vi
Japan VCCI Class B Statement��vi
Korea Warning Statements��vi
Battery Information��vii
Chemical Substances Information��vii
WEEE (Waste Electrical and Electronic Equipment) Statement�� viii
Chapter 1 Getting Started��1-1
Packing Contents�� 1-2
Optional Accessories�� 1-2
Assembly Precautions�� 1-3
Motherboard Specifications�� 1-4
Connectors Quick Guide�� 1-7
Back Panel Quick Guide�� 1-9
CPU (Central Processing Unit)�� 1-11
Introduction to the LGA 1150 CPU�� 1-11
CPU & Heatsink Installation�� 1-12
Memory�� 1-15
Dual-Channel mode Population Rule�� 1-15
Mounting Screw Holes�� 1-16
Power Supply�� 1-17
JPWR1~2: ATX Power Connectors�� 1-17
Expansion Slots�� 1-18
PCI_E1~6: PCIe Expansion Slots�� 1-18
Video/ Graphics Cards �� 1-19
Single Video Card Installation�� 1-19
Internal Connectors�� 1-20
SATA1~6: SATA Connectors�� 1-20
CPUFAN1,SYSFAN1~3: Fan Power Connectors�� 1-21
xi Preface
JFP1, JFP2: System Panel Connectors�� 1-22
JUSB1~2: USB 2.0 Expansion Connectors�� 1-23
JUSB3: USB 3.0 Expansion Connector�� 1-24
JCI1: Chassis Intrusion Connector�� 1-24
Preface
JAUD1: Front Panel Audio Connector�� 1-25

M2_1: M.2 Port�� 1-25
JTPM1: TPM Module Connector �� 1-26
JLPT1: Parallel Port Connector�� 1-26
JCOM1: Serial Port Connector�� 1-26
Jumpers�� 1-27
JBAT1: Clear CMOS Jumper�� 1-27
LED Status Indicators�� 1-28
LED Status Table�� 1-28
Drivers and Utilities�� 1-29
Driver/ Utilities Installation�� 1-29
Chapter 2 Quick Installation��2-1
CPU Installation�� 2-2
Memory Installation�� 2-4
Motherboard Installation�� 2-5
Power Connectors Installation�� 2-7
SATA HDD Installation�� 2-9
M.2 module Installation�� 2-10
Front Panel Connector Installation�� 2-11
JFP1 Connector Installation�� 2-11
Front Panel Audio Connector Installation�� 2-11
Peripheral Connector Installation�� 2-12
USB2.0 Connector Installation�� 2-12
USB3.0 Connector Installation�� 2-12
Graphics Card Installation�� 2-13
Chapter 3 BIOS Setup��3-1
Entering Setup�� 3-2
Entering BIOS Setup�� 3-2
Overview�� 3-3
Operation�� 3-6
Updating BIOS�� 3-7
Updating the BIOS with M-FLASH�� 3-7
SETTINGS�� 3-8
System Status�� 3-8
Advanced�� 3-9
Boot�� 3-16
Preface xii
Security�� 3-16
Save & Exit�� 3-17
OC�� 3-18
M-FLASH�� 3-24
Preface
OC PROFILE�� 3-25
HARDWARE MONITOR�� 3-26
Appendix A Realtek Audio�� A-1
Software Configuration��A-2
Software panel overview��A-2
Auto popup dialog��A-3
Hardware Default Setting��A-4
Appendix B Intel RAID�� B-1
Introduction��B-2
Using Intel Rapid Storage Technology Option ROM��B-3
Degraded RAID Array��B-10
System Acceleration (optional)��B-12
RST Synchronization (optional)��B-14
Appendix C Intel SBA (optional)�� C-1
Prerequisites�� C-2
Installing Intel SBA�� C-3
Software Configuration�� C-3
Software panel overview�� C-3
Password settings�� C-4
Help Button�� C-4
xiii Preface
Chapter 1
Getting Started
Thank you for choosing the Z97 GUARD-PRO/ H97 GUARD-PRO Series
(MS-7923 v1.X) ATX motherboard. The Z97 GUARD-PRO/ H97 GUARD-
PRO Series motherboards are based on Intel® Z97/ H97 chipset for optimal
system efficiency. Designed to fit the advanced Intel® LGA1150 processor,
the Z97 GUARD-PRO/ H97 GUARD-PRO Series motherboards deliver a high
performance and professional desktop platform solution.
Packing Contents
Drivers & Utilities Motherboard

Motherboard Disc User Guide I/O Shield
Chapter 1
SATA Cable
Optional Accessories
M-Connector
* These pictures are for reference only and may vary without notice.
* The packing contents may vary according to the model you purchased.
* If you need to purchase the optional accessories or request part numbers, please
visit the MSI website at http://www.msi.com/index.php or consult the dealer.
Getting Started 1-2

Assembly Precautions
■ The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
■ Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
■ Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
■ Hold the motherboard by the edges to avoid touching sensitive components.
■ It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is
not available, discharge yourself of static electricity by touching another metal object
before handling the motherboard.
■ Store the motherboard in an electrostatic shielding container or on an antistatic pad
Chapter 1
whenever the motherboard is not installed.
■ Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
■ Do not use the computer in a high-temperature environment.
■ Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
■ If you need help during any installation step, please consult a certified computer
technician.
Important
A screwdriver (not included) may be required for computer assembly.
1-3 Getting Started

Motherboard Specifications
CPU ■ Supports 4th and 5th Generation Intel® Core™ Processors, and
Support Intel® Pentium® and Celeron® Processors for Socket LGA1150
Chipset ■ Intel® Z97/ H97 Express Chipset
Memory ■ 4x DDR3 memory slots supporting up to 32GB
Support ■ Z97 GUARD-PRO supports DDR3 3200(OC)/3100(OC)/ 3000(OC)/
2800(OC)/ 2666(OC)/ 2600(OC)/ 2400(OC)/ 2200(OC)/ 2133(OC)/
2000(OC)/ 1866(OC)/ 1600/ 1333/ 1066 MHz
■ H97 GUARD-PRO supports DDR3 1600/ 1333/ 1066 MHz
■ Dual channel memory architecture
■ Supports non-ECC, un-buffered memory
■ Supports Intel® Extreme Memory Profile (XMP)
Chapter 1
Expansion ■ 1x PCIe 3.0 x16 slot (PCI_E2 , supports x16 speed)

Slots ■ 1x PCIe 2.0 x16 slot (PCI_E4 , supports x4 speed)
■ 4x PCIe 2.0 x1 slots
Onboard ■ 1x DisplayPort, supporting a maximum resolution of
Graphics 4096x2304@24Hz, 2560x1600@60Hz, 3840x2160@60Hz,
1920x1200@60Hz
■ 1x VGA port, supporting a maximum resolution of
1920x1200@60Hz
■ 1x DVI-D port, supporting a maximum resolution of
1920x1200@60Hz
Multi-GPU ■ Supports AMD® CrossFireTM Technology*
Support * Supports Windows 7 and Windows 8/ 8.1
Storage ■ Intel Z97/ H97 Express Chipset

- 6x SATA 6Gb/s ports (SATA1~6)
- 1x M.2 port*
- M.2 port supports M.2 SATA 6Gb/s module
- M.2 port supports M.2 PCIe module up to 10Gb/s speed**
- M.2 port supports 4.2cm/ 6cm/ 8cm length module
- Supports RAID 0, RAID1, RAID 5 and RAID 10***
- Supports Intel Smart Response Technology, Intel® Rapid Start
Technology and Intel Smart Connect Technology****
* The SATA5 and SATA6 ports will be unavailable when installing a module in the M.2 port.
** M.2 PCIe interface only supports UEFI option ROM, NOT support legacy option ROM.
*** M.2 PCIe interface does not support RAID 0, RAID1, RAID 5 and RAID 10.
**** Supports Intel Core processors on Windows 7 and Windows 8/ 8.1
USB ■ Intel Z97/ H97 Express Chipset

- 6x USB 3.0 ports (4 ports on the back panel, 2 ports available
through the internal USB connectors)
- 6x USB 2.0 ports (2 ports on the back panel, 4 ports available
through the internal USB connectors*)
* Internal JUSB1 connector supports MSI Super Charger.
Audio ■ Realtek® ALC892 Codec

- 7.1-Channel High Definition Audio
LAN ■ Realtek® RTL8111G Gigabit LAN controller
Getting Started 1-4

Back Panel ■ 1x PS/2 keyboard/ mouse port
Connectors ■ 2x USB 2.0 ports
■ 4x USB 3.0 ports
■ 1x VGA port
■ 1x DVI-D port
■ 1x DisplayPort
■ 1x LAN (RJ45) port
■ 6x audio jacks
Internal ■ 1x 24-pin ATX main power connector
Connectors ■ 1x 8-pin ATX 12V power connector
■ 6x SATA 6Gb/s connectors
■ 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
■ 1x USB 3.0 connector (supports additional 2 USB 3.0 ports)
■ 1x 4-pin CPU fan connector
■ 3x 4-pin system fan connectors
Chapter 1
■ 1x Clear CMOS jumper
■ 1x Front panel audio connector
■ 2x System panel connectors
■ 1x TPM module connector
■ 1x Chassis Intrusion connector
■ 1x Serial port connector
■ 1x Parallel port connector
I/O ■ NUVOTON NCT6792 Controller Chip
Controller
Hardware ■ CPU/System temperature detection
Monitor ■ CPU/System fan speed detection
■ CPU/System fan speed control
BIOS ■ 64 Mb flash (for Z97 GUARD-PRO)
Features ■ 128 Mb flash (for H97 GUARD-PRO)
■ UEFI AMI BIOS
■ ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0
■ Multi-language
Special ■ Military Class 4
Features ■ OC Genie 4
■ Click BIOS 4
■ AMD CrossFire
■ GO2BIOS
■ Total Fan Control
■ Super Charger
■ Smart Utilities
■ Command Center
■ ECO Center
1-5 Getting Started

Software ■ Drivers
■ MSI
- Command Center
- Live Update 6
- Smart Utilities
- Super Charger
- Fast Boot
- Network Genie
- ECO Center
■ 7-ZIP
■ Intel Extreme Tuning Utility
■ Norton Internet Security Solution
■ Small Business Advantage (for H97 GUARD-PRO)
Form ■ ATX Form Factor
Chapter 1
Factor ■ 12 in. x 8.7 in. (30.5 cm x 22 cm)
For the latest information about CPU, please visit

http://www.msi.com/cpu-support/
For more information on compatible components, please visit

http://www.msi.com/test-report/
Getting Started 1-6

Connectors Quick Guide
DIMM3
CPU Socket DIMM2
DIMM1 DIMM4
JPWR2 CPUFAN1
Chapter 1
Back
Panel SYSFAN3
JPWR1
SYSFAN1
PCI_E1 JUSB3
PCI_E2 M2_1
JBAT
SATA5
PCI_E3
SATA6
PCI_E4
SATA3_4
PCI_E5
SATA1_2
PCI_E6
JCI1
JFP1
JFP2
JAUD1 JUSB2
JCOM1 JUSB1
JLPT1 SYSFAN2
JTPM1
1-7 Getting Started

Connectors Reference Guide
Port Name Port Type Page
Back Panel 1-9
CPU LGA1150 CPU Socket 1-11
CPUFAN1,SYSFAN1~3 Fan Power Connectors 1-21
DIMM1~4 Memory Slots 1-15
JAUD1 Front Panel Audio Connector 1-25
JBAT1 Clear CMOS Jumper 1-27
JCI1 Chassis Intrusion Connector 1-24

Chapter 1
JCOM1 Serial Port Connector 1-26
JFP1, JFP2 System Panel Connectors 1-22
JLPT1 Parallel Port Connector 1-26
JPWR1~2 ATX Power Connectors 1-17
JTPM1 TPM Module Connector 1-26
JUSB1~2 USB 2.0 Expansion Connectors 1-23
JUSB3 USB 3.0 Expansion Connector 1-24
M2_1 M.2 Port 1-25
PCI_E1~6 PCIe Expansion Slots 1-18
SATA1~6 SATA Connectors 1-20
Getting Started 1-8

Back Panel Quick Guide
PS/2 Keyboard/
Mouse Combo VGA port
Port LAN Port
Line-In RS-Out
DisplayPort Line-Out CS-Out
Mic SS-Out
USB 2.0 Port USB 3.0 Port USB 3.0 Port DVI-D port
Chapter 1
▶ PS/2 Keyboard/Mouse Combo Port
A combination of PS/2® mouse/keyboard DIN connector for a PS/2® mouse/keyboard.
▶ USB 2.0 Port
The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other
USB 2.0-compatible devices.
▶ USB 3.0 Port
USB 3.0 port is backward-compatible with USB 2.0 devices. It supports data transfer
rate up to 5 Gbit/s (SuperSpeed).
Important
In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If a USB cable
is used, it must be USB 3.0 compliant.
▶ LAN Port
The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN).
LED LED Status Description
Off No link
Link/ Activity LED Yellow Linked

LINK/ACT SPEED
LED LED Blinking Data activity
Off 10 Mbps connection
Speed LED Green 100 Mbps connection
Orange 1 Gbps connection
▶ VGA Port
The DB15-pin female connector is provided for monitor.
▶ DVI-D Port
The DVI-D (Digital Visual Interface- Digital) connector can be connected to a LCD
monitor, or a CRT monitor with an adapter. To connect a monitor, please refer to the
monitor’s manual for more information.
▶ DisplayPort
DisplayPort is a digital display interface standard. This connector is used to connect a
monitor with DisplayPort inputs.
1-9 Getting Started

Important
This platform supports dual-display and triple-display function.
DVI+DisplayPort DVI+VGA VGA+DisplayPort DVI+VGA+DisplayPort
Extend mode
(Extend the desktop to ◯ ◯ ◯ ◯
the second and third
monitor)
Clone mode
(Monitors have the same ◯ ◯ ◯ ◯
screen)
▶ Audio Ports
These connectors are used for audio devices. The color of the jack refers to the
Chapter 1
function of the connector.

■ Blue-Line in: Used for connecting external audio outputting devices.
■ Green- Line out: Used as a connector for speakers or headphone.
■ Pink- Mic: Used as a connector for a microphone.
■ Black- RS-Out: Rear surround sound line out in 4/ 5.1/ 7.1 channel mode.
■ Orange- CS-Out: Center/ subwoofer line out in 5.1/ 7.1 channel mode.
■ Gray- SS-Out: Side surround sound line out in 7.1 channel mode.
Getting Started 1-10

CPU (Central Processing Unit)
Introduction to the LGA 1150 CPU

The surface of the LGA 1150 CPU has two notches and a golden triangle to
assist in correctly lining up the CPU for motherboard placement. The golden
triangle is the Pin 1 indicator.
Notch Notch
Chapter 1
Golden triangle is the Pin 1 indicator
Important
Overheating
Overheating can seriously damage the CPU and motherboard. Always make sure the
cooling fans work properly to protect the CPU from overheating. Be sure to apply an
even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
Replacing the CPU
When replacing the CPU, always turn off the system’s power supply and unplug the
power supply’s power cord to ensure the safety of the CPU.
Overclocking
This motherboard is designed to support overclocking. Before attempting to overclock,
please make sure that all other system components can tolerate overclocking. Any
attempt to operate beyond product specifications is not recommend. MSI does not
guarantee the damages or risks caused by inadequate operation beyond product
specifications.
1-11 Getting Started

CPU & Heatsink Installation
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability. Follow the steps
below to ensure correct CPU and heatsink installation. Wrong installation can damage
both the CPU and the motherboard.
Video Demonstration
Watch the video to learn how to install CPU & heatsink.
http://youtu.be/bf5La099urI
Chapter 1
1. Push the load lever down to unclip it and lift to the fully open position.
2. The load plate will automatically lift up as the load lever is pushed to the fully open
position.
Load lever
Load plate
Retention tab
Important
Do not touch the socket contacts or the bottom of the CPU.

3. Align the notches with the socket alignment keys. Lower the CPU straight down,
without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is
properly seated in the socket.
4. Close and slide the load plate under the retention knob. Close and engage the
load lever.
CPU notches
Chapter 1
Alignment Key
Retention knob
5. When you press down the load lever the PnP cap will automatically pop up from
the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the
CPU is removed from the socket.
6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the
CPU. This will help in heat dissipation and prevent CPU overheating.
PnP cap
Thermal paste

7. Locate the CPU fan connector on the motherboard.
8. Place the heatsink on the motherboard with the fan’s cable facing towards the fan
connector and the fasteners matching the holes on the motherboard.
CPU fan connector

Chapter 1
9. Push down the heatsink until the four fasteners get wedged into the holes on
the motherboard. Press the four fasteners down to fasten the heatsink. As each
fastener locks into position a click should be heard.
10. Inspect the motherboard to ensure that the fastener-ends have been properly
locked in place.
11. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.
Motherboard
Fastener-end
Important
• Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
your system.
• Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
• If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.

Memory
These DIMM slots are used for installing memory modules.
DIMM1
DIMM2
DIMM3
Chapter 1
DIMM4
Video Demonstration
Watch the video to learn how to install memories at the address below.
http://youtu.be/76yLtJaKlCQ
Dual-Channel mode Population Rule

In Dual-Channel mode, the memory modules can transmit and receive data with two
data bus channels simultaneously. Enabling Dual-Channel mode can enhance system
performance. The following illustrations explain the population rules for Dual-Channel
mode.
DIMM1
DIMM2 DIMM2
DIMM3
DIMM4 DIMM4
Important
• DDR3 memory modules are not interchangeable with DDR2, and the DDR3
standard is not backward compatible. Always install DDR3 memory modules in
DDR3 DIMM slots.
• To ensure system stability, memory modules must be of the same type and density
in Dual-Channel mode.
• Due to chipset resource usage, the system will only detect up to 31+ GB of memory
(not full 32 GB) when all DIMM slots have 8GB memory modules installed.

Mounting Screw Holes
When installing the motherboard, first install the necessary mounting stands required
for an motherboard on the mounting plate in your computer case. If there is an
I/O back plate that came with the computer case, please replace it with the I/O
backplate that came with the motherboard package. The I/O backplate should snap
easily into the computer case without the need for any screws. Align the mounting
plate’s mounting stands with the screw holes on the motherboard and secure the
motherboard with the screws provided with your computer case. The locations of the
screw holes on the motherboard are shown below. For more information, please refer
to the manual that came with the computer case.
case. They should line up with the
Chapter 1
toward the rear of the computer

The I/O ports should be facing
holes on the I/O backplate.
Important
• Install the motherboard on a flat surface free from unnecessary debris.
• To prevent damage to the motherboard, any contact between the motherboard
circuitry and the computer case, except for the mounting stands, is prohibited.
• Please make sure there are no loose metal components on the motherboard or
within the computer case that may cause a short circuit of the motherboard.

Power Supply
Video Demonstration
Watch the video to learn how to install power supply connectors.
http://youtu.be/gkDYyR_83I4
JPWR1~2: ATX Power Connectors

These connectors allow you to connect an ATX power supply. To connect the ATX
power supply, align the power supply cable with the connector and firmly press the
cable into the connector. If done correctly, the clip on the power cable should be
hooked on the motherboard’s power connector.
Chapter 1
4 .G ro un
.G ro u d
3 .G ro
ro un nd
2 .G
JPWR2
u d
1
n
d
8 .+1 2 V
.+ 2 V
7 .+1 12
1 V
6 .+
2
V
5
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 5 W u
3 V
.3
9 P ro
.
V
8 .G 5V un
.
7 .+ ro
JPWR1
6 .G 5V un
5 .+ ro 3V
4 .G . V
3 .+3 3.3
2 .+
d
1
2 3.+ +5 V
d
4
2 2. +5 s un d
.G 5 V
2 . e o n d
ro
2 .R Gr ou n #
u
1
V
2 9. Gr rou ON d
n
0
d
1 8.
1 7.G PS ou
1 6. Gr 2V V
1 5. 1 .3
1 4.- +3
d
1 3.
- n
1
Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.

Expansion Slots
This motherboard contains numerous slots for expansion cards, such as discrete
graphics or audio cards.
PCI_E1~6: PCIe Expansion Slots

The PCIe slot supports the PCIe interface expansion card.
PCIe 3.0 x16 Slot

Chapter 1
PCIe 2.0 x4 Slot
PCIe 2.0 x1 Slot
Important
When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.

Video/ Graphics Cards
If available, this motherboard takes advantage of the CPU’s integrate graphics
processor, but discrete video cards can be installed by way of the motherboard’s
expansion slots. Adding on one or more discrete video cards will significantly boost
the system’s graphics performance. For best compatibility, MSI graphics cards are
recommended.
Video Demonstration
Watch the video to learn how to install a graphics card on PCIe x16 slot
with butterfly lock.
http://youtu.be/mG0GZpr9w_A
Chapter 1
Single Video Card Installation
1. Determine what type of expansion slot(s) the video card will use. Locate the
expansion slot(s) on the motherboard. Remove any protective expansion slot
covers from the computer case.
2. Line up the video card on top of the expansion slot(s) with the display ports facing
out of the computer case. For a single video card installation, using the PCI_E2
slot is recommended.
3. Push the video card into its expansion slot(s). Depending on the expansion slot(s)
used, there should be clip(s) on the expansion slot(s) that will lock in place.
4. If needed, screw the edge of the graphics card to the computer case. Some video
cards might require a power cable directly from the power supply.
5. Please consult your video card’s manual for further instructions regarding driver
installation or other special settings.

Internal Connectors
SATA1~6: SATA Connectors
This connector is a high-speed SATA interface port. Each connector can connect to
one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD),
and optical drives (CD/ DVD/ Blu-Ray).
Video Demonstration
Watch the video to learn how to Install SATA HDD.
http://youtu.be/RZsMpqxythc
Chapter 1
SATA5
SATA6
SATA4
SATA3
SATA2
SATA1
SATA1~6 (6Gb/s, by Intel® Z97/ H97)
Important
• The SATA5 and SATA6 ports will be unavailable when installing a module in the
M.2 port.
• Many SATA devices also need a power cable from the power supply. Such devices
include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD /
Blu-Ray). Please refer to the device’s manual for further information.
• Many computer cases also require that large SATA devices, such as HDDs, SSDs,
and optical drives, be screwed down into the case. Refer to the manual that came
with your computer case or your SATA device for further installation instructions.
• Please do not fold the SATA cable at a 90-degree angle. Data loss may result
during transmission otherwise.
• SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.

CPUFAN1,SYSFAN1~3: Fan Power Connectors
The fan power connectors support system cooling fans with +12V. If the motherboard
has a System Hardware Monitor chipset on-board, you must use a specially designed
fan with a speed sensor to take advantage of the CPU fan control. Remember to
connect all system fans. Some system fans may not connect to the motherboard and
will instead connect to the power supply directly. A system fan can be plugged into
any available system fan connector.
CPUFAN1
1 .+ en e
.G 1 s d
2 .S pe
ro 2V e Co
3 .S
Chapter 1
u
4
n
d
n
tr
o
l
SYSFAN1/
SYSFAN2/
SYSFAN3
1 .S en
.G p s
2 .S C
ro ee e
3 .N
u d
4
n C
d o
n
tr
o
l
Important
• Please refer to your processor’s official website or consult your vendor to find
recommended CPU heatsink.
• These connectors support Smart Fan Control with liner mode. The Command
Center utility can be installed to automatically control the fan speeds according to
the CPU’s and system’s temperature.
• If there are not enough ports on the motherboard to connect all system fans,
adapters are available to connect a fan directly to a power supply.
• Before first boot up, ensure that there are no cables impeding any fan blades.

JFP1, JFP2: System Panel Connectors
These connectors connect to the front panel switches and LEDs. The JFP1 connector
is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When
installing the front panel connectors, please use the optional M-Connector to simplify
installation. Plug all the wires from the computer case into the M-Connector and then
plug the M-Connector into the motherboard.
Video Demonstration
Watch the video to learn how to Install front panel connectors.
http://youtu.be/DPELIdVNZUI
r
ake
Spe
Chapter 1
zer
Buz
8
.+
6 .+
.-
4 -
2
.
7 .Po sp n
.N w e d
5 u rou
JFP2
o e n
3 .G
P rL d
. S
in E LE
1
D D
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6
.+
4 +
.-
2
.
9
.R
7 .-
e R
. +
5 -
se e
JFP1
3 .+
rv e
.
e
1
d
s
H
t
D
S
D
w
it
L
ch
E
D
Important
• On the connectors coming from the case, pins marked by small triangles are
positive wires. Please use the diagrams above and the writing on the optional M-
Connectors to determine correct connector orientation and placement.
• The majority of the computer case’s front panel connectors will primarily be plugged
into JFP1.

JUSB1~2: USB 2.0 Expansion Connectors
This connector is designed for connecting high-speed USB peripherals such as USB
HDDs, digital cameras, MP3 players, printers, modems, and many others.
1 .G S B1
0 r B -
.N o 1
8 U
C un +
6
. S C
4 VC
. U
2
d
.
9 .G SB 0-
.N r o 0
7 .U B
o u +
5 .U CC
P nd
in
3 .V
1
Chapter 1
The JUSB1 (red mark) connector supports MSI’s new Super-Charger technology
which provides quicker USB charging of your smartphone or other USB-powered
devices. To enable this feature, please install the MSI Super-Charger application
on your computer. When the Super-Charger application is turned on, the JUSB1
connector will convert data channels to extra power channels to quickly charge your
connected device. Please note that when the Super-Charger application is turned on,
data transmission and synchronization over the JUSB1 connector will not function. To
enable the JUSB1 connector to function as a normal USB 2.0 connector, please turn
off the Super-Charger application. When the computer is in stand-by or hibernation
mode (S3/ S4/ S5) Super-Charger mode will automatically be enabled.
Video Demonstration
Watch the video to learn how to charge the smartphone with
Super-Charge.
http://youtu.be/FCyvjr5NbOw
Important
• Note that the VCC and GND pins must be connected correctly to avoid possible
damage.
• Please only connect one device per USB port to ensure stable charging.
• Super-Charger Technology is only available on select MSI motherboard models.
Please refer to the MSI website to check if your motherboard has Super-Charger
technology.
• For iPad, JUSB1 (red mark) can still charge iPad in S3, S4, S5 state.
• We recommend that don’t disconnect the device when you charge it in S1 state.

JUSB3: USB 3.0 Expansion Connector
The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data
transfer rates up to 5Gbits/s (SuperSpeed).
2 .P S B3 nd X _C
0 o B _
1 8.U S ou _ X
.N w 3 R
9
1 7.U Gr B3 _T
o e _R X
1 6. S B3 nd -
P r X _
in
1 .U S u .0 +
1 4.U r B2 .0
5
1 3.G S B2
1 2.U S
_ DP
D
1 1.U
N
T
1
_ _
C D
_ P
D
N
1 .U SB un T _
.P S 3 d X C
2 .U ro 3_ TX
o B3 _R _C _D
3 .G SB 3_ d -
w _
e R X
4 .U B n 0
r X _
5 S u 2. 0 +
6 .G SB 2. nd
.U ro
7 U B u
_ DP
D
8 .U ro
. S
N
9 0.G
Chapter 1
_ P
D
N
Important
• Note that the VCC and GND pins must be connected correctly to avoid possible
damage.
• To use a USB 3.0 device, you must connect the device to a USB 3.0 port through
an optional USB 3.0 compliant cable.
JCI1: Chassis Intrusion Connector

This connector connects to the chassis intrusion switch cable. If the computer case is
opened, the chassis intrusion mechanism will be activated. The system will record this
intrusion and a warning message will flash on screen. To clear the warning, you must
enter the BIOS utility and clear the record.
1 .C
.G IN
2
ro T
u RU
n
d

JAUD1: Front Panel Audio Connector
This connector allows you to connect the front audio panel located on your computer
case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design
Guide.
1 .N IC
0 o
.H P D
8 M
e in et
6 .N ou
a
.
d
4 Gr
P
h
2
o
.
n
e
e
D
ct
n
e
io
d
te
n
ct
io
n
9 .S ea R
.H E d
7 .H IC L
e NS P
5 .M IC
a E h
d
3 .M
P _S ne
Chapter 1
h E R
1
o N
n
e D
L
o
M2_1: M.2 Port
The M.2 port supports either M.2 SATA 6Gb/s module or M.2 PCIe module.
Important
• The SATA5 and SATA6 ports will be unavailable when installing a module in the
M.2 port.
• M.2 PCIe interface only supports UEFI option ROM, NOT support legacy option
ROM.
• M.2 PCIe interface does not support RAID 0, RAID1, RAID 5 and RAID 10.

This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM
This connector is used to connect an optional parallel port bracket. The parallel port
is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended
This connector is a 16550A high speed communication port that sends/receives 16

3 T
in C
p 2 L
ta in .S Y
a p 1 5 E S
d ta pin 0 2 3.P U K# 7
n
e s & da ta pi 2 .B C ND 6
m s & da ta 1
ra re s a 2 9.A R ND 5
F d s & d 1 .P R ND 4
C ad dre ss & 7
1 5.P R ND 3 I S d
P re s .R T n
.L C d d s 1 .P 9 . R r ou T
3 P a d re
1 1.L C a dd et 3 R D 2
1 1.P RN D 1 7 .G U
1 LP C a es k
.
9 .LP C R loc
1 .P N D 5 . SO C D
in
P d 9 .P R N D0 3 .D
7 .LP C C 7 .PR N B#
5 .LP C o un d 1
3 .LP .N ro un d 5 .PR ST
6 in
2 4.G ro un d
security platform manual for more details and usages.
1 3 .R P
2 2.G ro un d 1 o
2 .G ro un d .N S
0 0 T R
d 2 .G r o u n d 1 .C S
8 # 8 D R
n
1 6 . G r o u n d IN
1-26
.
u d 6 T
bytes FIFOs. You can attach a serial device.

ro un n r r
1 .G ro un L .D N
.G ro Pi we Q r ow
e
4 S 4 SI
1 2.G ro _ # .
JTPM1: TPM Module Connector
4
1 2.G o Po IR e p 1 .G PT IT
2
JLPT1: Parallel Port Connector

1 0.N V ial ow by
Capabilities Parallel Port (ECP) mode.
JCOM1: Serial Port Connector

0
1 .5 er P nd 1 .L IN #
8 .S 3V ta 8 P R #
.
6 .3. S 6 ER D
.
4 .3V 4 .AF
2 2
Getting Started
Chapter 1
Jumpers
JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the
motherboard to save system configuration data. With the CMOS RAM, the system can
automatically boot into the operating system (OS) every time it is turned on. If you
want to clear the system configuration, set the jumpers to clear the CMOS RAM.
1 1
Chapter 1
Keep Data Clear Data
Important
You can clear the CMOS RAM by shorting this jumper while the system is off.
Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on
because it will damage the motherboard.

LED Status Indicators
Chapter 1
MSI LED
LED Status Table

The following table describes the status of LED indicators.
LED LED Status Description
MSI On Debug

Drivers and Utilities
After you install the operating system you will need to install drivers to maximize the
performance of the new computer you just built. MSI motherboard comes with a Driver
Disc. Drivers allow the computer to utilize your motherboard more efficiently and take
advantage of any special features we provide.
You can protect your computer from viruses by installing the bundled security
program. The bundle also includes a variety of powerful and creative utilities.
Driver/ Utilities Installation

Please follow the steps below to install drivers and utilities for your new computer.
1. Insert MSI Driver Disc into the optical drive. The installer will automatically appear
Chapter 1
if autorun is enabled in OS.
2. Installer will automatically find and list all necessary drivers.
3. Click Install button.
Click here
4. The software installation will then be in progress, after it has finished it will prompt
you to restart.
5. Click OK button to finish.
6. Restart your computer.
You can also use the same method to install the utilities.

Chapter 2
Quick Installation
This chapter provides demonstration diagrams about how to install your
computer. Some of the installations also provide video demonstrations.
Please link to the URL to watch it with the web browser on your phone or
tablet. You may have even link to the URL by scanning the QR code.
Important
The diagrams in this chapter are for reference only and may vary from the
product you purchased.
CPU Installation
http://youtu.be/bf5La099urI
1 2
Chapter 2
3
4
5 6
Quick Installation 2-2

7
Chapter 2
2-3 Quick Installation

Memory Installation
http://youtu.be/76yLtJaKlCQ
1
Chapter 2

Motherboard Installation
Chapter 2
2

3
Chapter 2

Power Connectors Installation
http://youtu.be/gkDYyR_83I4
88
Chapter 2
E6 SI
M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M
or
88
E6 SI 88
M C4 E6 SI
M M C4
M
88
E6 SI 88
M C4 E6 SI
M M C4
M
88
E6 SI 88
M C4 E6 SI
M M C4
M

3
88
E6 SI
M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M
Chapter 2

SATA HDD Installation
http://youtu.be/RZsMpqxythc
or
Chapter 2
2
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC
88
88 E6 I
E6 I MS 4
MS 4 MC
MC
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
or
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC
88
88 E6 I
E6 I MS 4
MS 4 MC
MC
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4

M.2 module Installation
3
Chapter 2
4.2 cm
6 cm
8 cm

Front Panel Connector Installation
JFP1 Connector Installation
http://youtu.be/DPELIdVNZUI
REST SW
POWER SW
H.D.D. LED
POWER LED
RSVD_DNU
RSVD_DNU
RST_SW+
RST_SW+
RST_SW-
HD_LED-
RST_SW-
HD_LED+
PWR_SW-
FP PWR/SLP
PWR_SW+
HD_LED-
FP PWR/SLP
HD_LED+
88
E6 I
MS 4
MC
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
Chapter 2
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC
Front Panel Audio Connector Installation
88
E6 SI
M C4
M
88
E6 SI 8
M C4 E68
MSI
M 8
MC4
E68
MSI
MC4
8
E68
MSI
MC4
88 8
E6 SI E68
MSI
M C4 MC4
M
88
E6 SI
M C4
M

Peripheral Connector Installation
USB2.0 Connector Installation
or
B
US B
US
88 88
E6 SI E6 SI
M C4 M C4
M M
8 8
E68 E68
MSI MSI
MC4 MC4
Chapter 2
8 8
E68 E68
MSI MSI
MC4 MC4
8 8
E68 E68
MSI MSI
MC4 MC4
8 8
E68 8 E68 8
MSI MSI E68
MC4 E68 MC4 MSI
MSI MC4 8
MC4 8
E68 8 E68
8 MSI MSI
E68 MC4 E68 MC4
MSI MSI
MC4 8 MC4 8
E68 E68
MSI MSI
MC4 MC4
88 88
E6 SI E6 SI
M C4 M C4
M M
USB3.0 Connector Installation
88
E6 SI
M C4
M
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
88
E6 SI
M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M

Graphics Card Installation
http://youtu.be/mG0GZpr9w_A
Chapter 2
2

3
4
Chapter 2

Chapter 3
BIOS Setup
CLICK BIOS is a revolutionary UEFI interface that allows you to setup and
configure your system for optimum use. Using your mouse and keyboard,
users can change BIOS settings, monitor CPU temperature, select the boot
device priority and view system information such as the CPU name, DRAM
capacity, the OS version and the BIOS version. Users can import and export
parameter data for backup or for sharing with friends. By connecting to the
Internet within CLICK BIOS, users can browse webpages, check mail and use
Live Update in your system.
Important
• The items under each BIOS category described in this chapter are
under continuous update for better system performance. Therefore, the
description may be slightly different from the latest BIOS and should be held
for reference only.
• The pictures in this chpater are for reference only and may vary from the
product you purchased. Please refer to the actual screens of your system
for detailed information.
• Please clear the CMOS data and restore the default settings if the system
becomes unbootable after changing BIOS settings. (Refer to the Clear
CMOS jumper/ button section to clear the CMOS data, select the "Restore
Defaults" and press <Enter> in BIOS to load the default settings.)
Entering Setup
The default settings offer the optimal performance for system stability in normal
conditions. You may need to run the Setup program when:
■ An error message appears on the screen during the system booting up, and
requests you to run SETUP.
■ You want to change the default settings for customized features.
Important
• Please clear the CMOS data and restore the default settings if the system becomes
unbootable after changing BIOS settings. (Refer to the Clear CMOS jumper/ button
section to clear the CMOS data, select the "Restore Defaults" and press <Enter> in
BIOS to load the default settings.)
• If you are unfamiliar with the BIOS settings, we recommend that you keep the
default settings to avoid possible system damage or failure booting due to
inappropriate BIOS configuration.
Entering BIOS Setup

Power on the computer and the system will start the Power On Self Test (POST)
process. When the message below appears on the screen, press <DEL> key to enter
BIOS:
Press <Del> to run BIOS setup, or <F11> to run boot menu

If the message disappears before you respond and you still need to enter BIOS,
restart the system by turning the computer OFF then back ON or pressing the RESET
button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and
<Delete> keys.
MSI additionally provides two methods to enter the BIOS setup. You can click the
“GO2BIOS” tab on “MSI Fast Boot” utility screen or press the physical “GO2BIOS"
button (optional) on the motherboard to enable the system going to BIOS setup
Chapter 3
directly at next boot.
Click "GO2BIOS" tab on

"MSI Fast Boot" utility
screen.
Important
Please be sure to install the “MSI Fast Boot” utility before using it to enter the BIOS
setup.
BOIS Setup 3-2

Overview
After entering BIOS, the following screen is displayed.
Temperature monitor
My Favorites Language
System
information
Boot device
Virtual OC priority bar
Genie Button
BIOS menu BIOS menu

selection selection
Menu display
▶ BIOS menu selection

The following options are available:
■ SETTINGS - Uses this menu to specify the parameters for chipset and boot
devices.
■ OC - This menu contains the frequency and voltage adjustments. Increasing
the frequency can get better performance, however high frequency and heat
can cause instability, we do not recommend general users to overclock.
■ M-FLASH - This menu provides the way to update BIOS with a USB flash
disk.
■ OC PROFILE -This menu is used to set various overclocking profiles. Chapter 3
■ HARDWARE MONITOR - This menu is used to set the speeds of fans and
monitor voltages of system.
■ BOARD EXPLORER - It provides the information of the installed devices on
the motherboard.
3-3 BIOS Setup

▶ Virtual OC Genie Button
Enables or disables the OC Genie function by clicking on this button. When enabled,
this button will be light. Enabling OC Genie function can automatically overclock with
MSI optimized overclocking profile.
Important
We recommend that you do not to make any modification in OC menu mode and do
not to load defaults after enabling the OC Genie function.
▶ Menu display
This area provides BIOS setting items and information to be configured.
▶ Boot device priority bar
You can move the device icons to change the boot priority.
High priority Low priority
▶ System information
Shows the time, date, CPU name, CPU frequency, DRAM frequency, DRAM capacity
and the BIOS version.
▶ Language
Allows you to select the language of the BIOS setup.
▶ Temperature monitor
Shows the temperatures of the processor and the motherboard.
▶ My Favorites
Allows you to create your personal BIOS menu where you can save and access your
favorite/ frequently-used BIOS setting items.
■ Default HomePage - Allows you to select a BIOS menu (e.g. Settings,
OC...,etc) as the BIOS home page.
Chapter 3
■ Favorite1~5 - Allows you to add the frequently-used/ favorite BIOS setting

items in one page.
BOIS Setup 3-4

Adding BIOS item to Favorite 1~5
1. Move the mouse cursor to highlight a BIOS setting item.
2. Right-click (or press "F2" key) and then choose a favorite menu (Favorite 1~5) to
add the BIOS item.
Choose a favorite menu

to add the BIOS item
Deleting BIOS item from Favorite 1~5

1. Move the mouse cursor to highlight a BIOS item in the Favorite 1~5 menu.
2. Right-click (or press "F2" key) and then click "Delete" to delete the BIOS item.
Click “Delete” to delete the BIOS item
Changing the order of BIOS items on Favorite 1~5

1. Enter the Favorite 1~5 menu.
2. Right-click (or press "F2" key) and then click "Menu lock".
3. Highlight an item and then click the arrow buttons (or press the up/ down arrow
keys) to change the item order.
4. Finally, click the lock button to fix the order.
Chapter 3
Arrow buttons Lock button
3-5 BIOS Setup

Operation
You can control BIOS settings with the mouse and the keyboard. The following table
lists and describes the hot keys and the mouse operations.
Hot key Mouse Description
<↑↓→← > Select Item
.
Move the cursor
<Enter> Select Icon/ Field
Click/ Double-click
the left button
<Esc> Jump to the Exit menu or return to the previous
from a submenu
Click the right button

<+> Increase the numeric value or make changes
<-> Decrease the numeric value or make changes
<F1> General Help
<F2> Favorites assistant
<F3> Enter My Favorites menu
<F4> CPU Specifications
<F5> Enter Memory-Z
<F6> Load optimized defaults
<F8> Load Overclocking Profile
Chapter 3
<F9> Save Overclocking Profile

<F10> Save Change and Reset
<F12> Save a screenshot to a FAT/FAT32 USB drive
BOIS Setup 3-6

Updating BIOS
Updating the BIOS with M-FLASH
▶ Before updating
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash disk.
Important
Only the FAT32/ NTFS format USB flash disk supports updating BIOS by M-FLASH.
▶ Updating BIOS
1. Insert the USB flash disk that contains the BIOS update file into the computer.
2. Restart the system, and then press "Del" key to enter the BIOS Setup during
POST.
3. Enter the M-FLASH menu and then select the "Select one file to update BIOS and
ME”, and then select the BIOS update file to begin the BIOS update.
4. After the flashing process is 100% complete, the system will restart.
Chapter 3
3-7 BIOS Setup

SETTINGS
System Status
▶ System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day> Day of the week, from Sun to Sat, determined by BIOS. Read-only.
<month> The month from Jan. through Dec.
<date> The date from 1 to 31 can be keyed by numeric function keys.
<year> The year can be adjusted by users.
▶ System Time
Sets the system time. Use tab key to switch between time elements.
The time format is <hour> <minute> <second>.
▶ SATA Port
Show the information of connected SATA device.
Important
Chapter 3
If the connected SATA device is not displayed, turn off computer and re-check SATA
cable and power cable connections of the device and motherboard.
▶ System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).
▶ DMI Information
Shows system information, desktop Board Information and chassis Information. (Read
only).
BOIS Setup 3-8

Advanced
▶ PCI Subsystem Settings
Sets PCI, PCI express interface protocol and latency timer. Press <Enter> to enter the
sub-menu.
▶ PEGX - Gen X [Auto]
Sets PCI Express protocol for matching different installed devices.
[Auto] Enables all PCIe Gen1, Gen2 and Gen3. supports.
[Gen1] Enables PCIe Gen1 support only.
▶ PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
▶ ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press <Enter> to enter the
sub-menu.
▶ Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking] The power LED blinks to indicate the S3 state.
▶ Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
<Enter> to enter the sub-menu.
▶ Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
▶ LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when "Onboard LAN Controller" is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
Chapter 3
▶ Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.
▶ Ipv4 PXE Support [Enabled]
When “Enabled”, the system UEFI network stack will support Ipv4 protocol. This
item will appear when “Network Stack” is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
3-9 BIOS Setup

▶ Ipv6 PXE Support [Enabled]
When “Enabled”, the system UEFI network stack will support Ipv6 protocol. This
item will appear when “Network Stack” is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.
▶ SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[Disabled] Disables the SATA function.
[IDE Mode] Specify the IDE mode for SATA storage devices.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
[RAID Mode] Enables RAID function for SATA storage devices.
▶ SATAXX Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support. This item will appear
when the “SATA Mode” set to [AHCI]/ [RAID].
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
▶ External SATA 6Gb/s Controller Mode [AHCI]
Sets the operation mode of the external SATA controller.
[Disabled] Disables the SATA function.
[IDE] Specify the IDE mode for SATA storage devices.
[AHCI] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
▶ HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
▶ HPET [Enabled]
Chapter 3
Enables or disables the HPET (High Precision Event Timers) support.

▶ Integrated Graphics Configuration
Adjusts integrated graphics settings for optimum system. Press <Enter> to enter the
sub-menu.
▶ Initiate Graphic Adapter [PEG]
Selects a graphics device as the primary boot device.
[IGD] Integrated Graphics Display.
[PEG] PCI-Express Graphics Device.
▶ Integrated Graphics Share Memory [default]
Selects a fixed amount of system memory allocated to the onboard graphics. This
item defines the exact memory size shared to the onboard graphics. [Options: 32M,
64M, 128M, 256M, 512M, 1024M]
BOIS Setup 3-10

▶ IGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external
graphics card.
[Enabled] Enables IGD multi-screen function.
[Disabled] Disables IGD multi-screen function.
▶ Intel(R) Rapid Start Technology
Sets Intel® Rapid Start Technology for optimizing the system resume operation. Press
▶ Intel(R) Rapid Start Technology [Disabled]
Intel® Rapid Start Technology lets the system resume from sleep mode quickly.
This function is available when an SSD is installed.
[Enabled] Enables Intel Rapid Start Technology.
[Disabled] Disables Intel Rapid Start Technology.
▶ Entry on S3 RTC Wake [Enabled]
Enables or disables to support S3 RTC wake up with Intel Rapid Start Technology.
This item will appear when “Intel(R) Rapid Start Technology” is enabled.
[Enabled] Allows the system to enter the sleep mode with Intel Rapid Start
Technology.
[Disabled] Disables this function.
▶ Entry After [10 minutes]
Sets a timer for system to enter the sleep mode with Intel Rapid Start
Technology. This item will appear when “Intel(R) Rapid Start Technology” is
enabled. [Options: 1 minute ~ 120 minutes]
▶ Active Page Threshold Support [Enabled]
Enables or disables to support Active Page Threshold when the Rapid Start
partition size is less than the system DRAM size.
[Enabled] Enables the additional partition size of SSD for iRST.
▶ Active Memory Threshold
Sets Rapid Start partition size for Active Page Threshold. This item will appear
when “Active Page Threshold Support” is enabled. Chapter 3
Important
The partition size must be larger then the amount of memory.
▶ Hybrid Hard Disk Support [Disabled]
Enables or disables the Intel Rapid Start Technology to support hybrid hard disk
drive.
[Enabled] Enables hybrid hard disk support.
[Disabled] Disables hybrid hard disk support.
▶ RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored.
The screen will be saved before the system enters sleep mode. Then the system
will restore the screen when wakened.
[Enabled] Enables this function.
3-11 BIOS Setup

▶ RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore] The BIOS POST splash screen will be saved/ restored.
[DeskTop Save/Restore] The desktop image will be saved/ restored.
▶ LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears
when a installed CPU supports this function and "Intel C-State" is enabled.
[Enabled] Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled] Disables this feature.
▶ USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the sub-
menu.
▶ USB Controller [Enabled]
Enables or disables all USB controller.
▶ XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature.
▶ EHCI Hand-off [Enabled]
Enables or disables EHCI hand-off support for the operating system without EHCI
hand-off feature.
▶ Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.
▶ Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter>
Chapter 3
to enter the sub-menu.

▶ Serial (COM) Port 0 Configuration
Sets detailed configuration of serial(COM) port 0. Press <Enter> to enter the sub-
menu.
▶ Serial (COM) Port 0 [Enabled]
Enables or disables serial (COM) port 0.
▶ Serial (COM) Port 0 Settings [Auto]
Sets serial port 0 (COM). If set to "Auto", BIOS will optimize the IRQ
automatically or you can set it manually.
▶ Parallel (LPT) Port Configuration
Sets detailed configuration of parallel port (LPT). Press <Enter> to enter the sub-
menu.
▶ Parallel (LPT) Port [Enabled]
Enables or disables parallel(LPT) port.
BOIS Setup 3-12

▶ Parallel (LPT) Port Settings [Auto]
Sets parallel port (LPT). If set to "Auto", BIOS will optimize the IRQ
▶ Device Mode [Printer Mode]
Selects an operating mode for parallel port.
[Printer Mode] Printer port mode
[SPP] Standard Parallel Port mode
[EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard
Parallel Port mode.
[ECP] Extended Capability Port mode
[ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel
Port-1.9/ 1.7 mode.
▶ Intel(R) Smart Connect Configuration
Sets Intel Smart Connect Technology for optimizing system network performance in
sleep mode. Press <Enter> to enter the sub-menu.
▶ Intel(R) Smart Connect Technology [Enabled]
Enables or disables Intel(R) Smart Connect Technology. This feature can update
applications (ex. email and social networks) by periodically waking your system
from sleep mode. And you do not need to wait for the applications to update when
you wake up the system.
[Enabled] Enables Intel smart connect technology.
[Disabled] Disables Intel smart connect technology.
▶ Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
▶ EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013
regulation.
[Enabled] Optimize the system power consumption according to EuP 2013
regulation.
[Disabled] Disables this function. Chapter 3
Note: When enabled, the system will not support S4 & S5 wake up by USB, PCI
and PCIe devices.
▶ Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the previous state (power on/ power off)
before AC power loss.
3-13 BIOS Setup

▶ Windows 8/ 8.1 Configuration
Sets Windows 8/ 8.1 detailed configuration and behaviors. Press <Enter> to enter the
sub-menu.
▶ Windows 8/ 8.1 Feature [Disabled]
Enables the supports for Windows 8/ 8.1 or disables for other operating systems.
Before enabling this item, make sure all installed devices & utilities (hardware &
software) should meet the Windows 8/ 8.1 requirements.
[Enabled] The system will switch to UEFI mode to meet the Windows 8/ 8.1
requirement.
▶ MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to
speed up system boot time which is faster than the boot time of “Fast Boot”.
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And
the following "Fast Boot" will be disabled and fixed.
[Disabled] Disables MSI Fast Boot.
▶ Fast Boot [Disabled]
Enables or disables the Windows 8/ 8.1 fast boot feature. This item will only be
available when "MSI Fast Boot" is disabled.
[Enabled] Enables the Fast Boot configuration to accelerate system boot time.
[Disabled] Disables the Fast Boot configuration.
Important
If you want to enter BIOS with enabled “MSI Fast Boot” mode or enabled "Fast Boot"
mode, you have to click the "GO2BIOS" tab on MSI Fast Boot utility screen or press
the "GO2BIOS" button (optional) on the motherboard. And then the system will enter
to BIOS setup directly at next boot.
▶ Internal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press <Enter> to enter
the sub-menu. This menu shows the iGFX Driver version for system information
management. This sub-menu appear when “Windows 8/ 8.1 Feature” is enabled.
Chapter 3
▶ Secure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press
<Enter> to enter the sub-menu. This sub-menu will appear when “Windows 8/ 8.1
Feature” is enabled.
▶ Secure Boot Support [Disabled]
Enables or disables secure boot support.
[Enabled] Enables the secure boot function and allow you to set the secure
boot settings.
▶ Secure Boot Mode [Standard]
Selects the secure boot mode. This item is to select how the secure boot keys
be loaded. This item appears when "Secure Boot" is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually
load the secure keys.
BOIS Setup 3-14

▶ Key Management
Manages the secure boot keys. Press <Enter> to enter the sub-menu. This sub-
menu will appear when “Secure Boot Mode” sets to [Custom].
▶ Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press <Enter> to enter the
sub-menu.
▶ Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS] Activates the following items, and use these items to set the wake up
events.
[OS] The wake up events will be defined by OS.
▶ Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
▶ Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the
system will automatically resume (boot up) on a specified date/hour/minute/second
in these fields (using the <+> and <-> to select the date & time settings).
▶ Resume By PCI-E Device [Disabled]
Disables or enables the system wake up by PCI/ PCI express device.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of PCIe device is detected. Note:
enables this Item to support “Resume from S3 By USB Device” with
third party USB 3.0 port.
▶ Resume By USB Device [Disabled]
Disables or enables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity
of USB device is detected.
[Disabled] Disables this function. Chapter 3
Important
For MB with USB Power Jumpers, you will need to set the jumpers to enabled .
▶ Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Disables or enables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
3-15 BIOS Setup

▶ Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Disables or enables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
Boot
Sets the sequence of system boot devices.
▶ Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled] The OS boots straight to the GUI without showing the POST screen.
[Disabled] Shows the POST messages at booting.
▶ GO2BIOS [Disabled]
Enables or disables the system to power on and go to the BIOS setup directly by long
pressing the power button about 4 seconds when the system is off.
[Enabled] The system boots straight to the BIOS setup by long pressing the power
button about 2~4 seconds when the system is off.
▶ Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement. This item will become unselectable and will be configured
automatically by BIOS when “Windows 8/ 8.1 Feature” is enabled.
[UEFI] Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.
▶ FIXED BOOT ORDER Priorities
Sets device priority for system boot.
▶ Boot Option #1~N
Chapter 3
These items are used to prioritize the installed boot devices.
Security
▶ Administrator Password
Sets administrator password for system security. Enters the administrator password if
set; user has full rights to change the BIOS items.
▶ User Password
Sets User Password for system security. Enters the user password if set; but user
might have limited rights to change the BIOS items.
Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
BOIS Setup 3-16

confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
▶ Trusted Computing
Sets TPM (Trusted Platform Module) function.
▶ TPM SUPPORT [Disabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
▶ Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu.
▶ Chassis Intrusion [Disabled]
This function will be available if the chassis equips a chassis intrusion switch.
Once the chassis is opened, the system will record and issue a warning message.
To clear the warning message, set the item to [Reset], then it will return to
[Enabled] later. [Options: Disabled, Enabled, Reset]
Save & Exit

▶ Discard Changes and Exit
Exit BIOS setup without saving any change. This it is used to abandon all changes
and exit BIOS setup.
▶ Save Changes and Reboot
This item is used to save all changes and reboot the system.
▶ Save Changes
This item is used to save current changes.
▶ Discard Changes
This item is used to discard current all changes and restore to the previous values.
▶ Restore Defaults
This item is used to restore/ load all default values by the BIOS vendor. Chapter 3
▶ Boot Override
The installed boot-able devices will appear on this menu, you can select one of them
be a boot device to start booting.
3-17 BIOS Setup

OC
Important
• Overclocking your PC manually is only recommended for advanced users.
• Overclocking is not guaranteed, and if done improperly, can void your warranty or
severely damage your hardware.
• If you are unfamiliar with overclocking, we advise you to use OC Genie for easy
overclocking.
▶ Simple/Advanced Mode [Simple]

Enables or disables the advanced OC settings in BIOS.
[Simple] Provides the regular OC settings in BIOS setup.
[Advanced] Provides the advanced OC settings for experienced users to configure
in BIOS setup.
Note: We use * as the symbol for the OC settings of Advanced mode.
< CPU Setting >
Chapter 3
▶ Adjust CPU Ratio [Auto]

Sets the CPU ratio that is used to determine CPU clock speed for all cores. This item
can only be changed if the processor supports this function.
▶ Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶ EIST [Enabled]*
Enables or disables the Enhanced Intel® SpeedStep Technology. This item will be
available when "Adjust CPU Ratio" is set to [Auto].
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and average
heat production.
[Disabled] Disables EIST.
▶ Intel Turbo Boost [Enabled]*
Enables or disables the Intel® Turbo Boost. This item appears when the installed CPU
supports this function.
BOIS Setup 3-18

[Enabled] Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
▶ Legacy Tweaking [Disabled]*
Enables or disabled to improve performance for legacy benchmarking application like
3DMark 01.
[Enabled] Enables this function for improving 3DMark 01 performance.
▶ Adjust Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.
▶ Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
▶ Adjust GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.
▶ Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.
< CPU BCLK Setting >
▶ CPU Base Clock (MHz) [Default]
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please
note that overclocking behavior and stability is not guaranteed. This item appears
when the installed processor supports this function.
< DRAM Setting >
▶ DRAM Reference Clock [Auto]*
Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed.
▶ DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶ Adjusted DRAM Frequency
Chapter 3
Shows the adjusted DRAM frequency. Read-only.
▶ Extreme Memory Profile (X.M.P) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
This item will be available when you install the memory modules that support X.M.P.
technology.
[Profile 1] Uses profile1 over-clocking settings of installed XMP memory module.
[Profile 2] Uses profile2 over-clocking settings of installed XMP memory module.
▶ DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
[Link] Allows user to configure the DRAM timing manually for all memory
channel.
3-19 BIOS Setup

[UnLink] Allows user to configure the DRAM timing manually for respective
memory channel.
▶ Advanced DRAM Configuration
Press <Enter> to enter the sub-menu. This sub-menu will be activated after setting
[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
▶ DRAM Training Configuration*
Press <Enter> to enter the sub-menu. Enables or disables the various training ways of
DRAM. The system may become unstable or unbootable after changing these items
in this sub-menu. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
▶ Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Memory will completely imitate the archive of first initiation and first
training. After that, the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
< Voltage Setting >

▶ SVID Communication [Auto]*
Enables or disables SVID (Serial Voltage Identification) support.
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled] Disables SVID (Serial Voltage Identification) support.
▶ VCCIN Voltage [Auto]
Chapter 3
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
▶ CPU Core/Ring/GT Voltage Mode [Auto]*
Selects the control mode for CPU Core/ Ring/ GT voltages.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage
offset mode.
[Adaptive + Offset ] Sets the adaptive voltage automatically and allows you to set the
offset voltage.
[Override + Offset ] Allows you to set the voltage and the offset voltage manually.
BOIS Setup 3-20

▶ CPU Core Voltage/ CPU Ring Voltage/ CPU GT Voltage [Auto]
Sets the CPU Core/ Ring/ GT voltages. If set to "Auto", BIOS will set these voltages
▶ CPU SA Voltage/ CPU IO Analog Voltage/ CPU IO Digital Voltage [Auto]
Sets the CPU SA/ IO Analog/ IO Digital voltages. If set to "Auto", BIOS will set these
voltages automatically or you can set it manually. This item appears when "CPU SA/
IOA/IOD Voltage Mode" sets to [Manual Mode].
▶ XXX Voltage [Auto]* (optional)
Sets the voltages related to memory/ PCH. If set to "Auto", BIOS will set the voltage
< Other Setting >
▶ CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
▶ DIMMXX Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.
▶ CPU Features
Press <Enter> to enter the sub-menu.
▶ Hyper-Threading Technology [Enabled]
The processor uses Hyper-Threading technology to increase transaction rates
and reduces end-user response times. Intel Hyper-Threading technology treats
the multi cores inside the processor as multi logical processors that can execute Chapter 3
instructions simultaneously. In this way, the system performance is highly
improved. This item appears when the installed CPU supports this setting.
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
▶ Active Processor Cores [All]
This item allows you to select the number of active processor cores.
▶ Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled] BIOS will limit the maximum CPUID input value to circumvent
boot problems with older operating system that do not support the
processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.
3-21 BIOS Setup

▶ Execute Disable Bit [Enabled]
Intel’s Execute Disable Bit functionality can prevent certain classes of malicious
“buffer overflow” attacks where worms attempt to execute code to damage the
system. It is recommended that keeps this item enabled always.
[Enabled] Enables NO-Execution protection to prevent the malicious attacks
and worms.
▶ Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform to run
multiple operating systems in independent partitions. The system
can function as multiple systems virtually.
▶ Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled] Allows the hardware prefetcher to automatically pre-fetch data
and instructions into L2 cache from memory for tuning the CPU
performance.
[Disabled] Disables the hardware prefetcher.
▶ Adjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled] Enables adjacent cache line prefetching for reducing the cache
latency time and tuning the performance to the specific application.
[Disabled] Enables the requested cache line only.
▶ CPU AES Instructions [Enabled]
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
[Enabled] Enables Intel AES support.
[Disabled] Disables Intel AES support.
▶ Intel Adaptive Thermal Monitor [Enabled]
Enables or disables the Intel adaptive thermal monitor function to protect the CPU
Chapter 3
from overheating.
[Enabled] Throttles down the CPU core clock speed when the CPU is over the
adaptive temperature.
▶ Intel C-State [Auto]
C-state is a processor power management technology defined by ACPI.
[Enabled] Detects the idle state of system and reduce CPU power consumption
accordingly.
[Disabled] Disable this function.
▶ C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. This item
appears when "Intel C-State" is enabled.
[Enabled] Enables C1E function to reduce the CPU frequency and voltage for
power-saving in halt state.
BOIS Setup 3-22

▶ Package C State limit [Auto]
This item allows you to select a CPU C-state mode for power-saving when system
is idle. This item appears when "Intel C-State" is enabled.
[C0~C7s] The power-saving level from high to low is C7s, C7, C6, C3, C2,
then C0.
▶ LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears
when a installed CPU supports this function and "Intel C-State" is enabled.
[Enabled] Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled] Disables this feature.
▶ EIST [Enabled]
Enables or disables the Enhanced Intel® SpeedStep Technology. This item will
appear when "Simple/ Advanced Mode" is set to [Simple].
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
[Disabled] Disables EIST.
▶ Intel Turbo Boost [Enabled]
Enables or disables the Intel® Turbo Boost. This item is for Simple mode and
appears when the installed CPU supports this function.
[Enabled] Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
▶ Long Duration Maintained (s) [Auto]
Sets the maintaining time for "Long duration power Limit(W)". Chapter 3
▶ Short Duration Power Limit (W) [Auto]
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
▶ CPU Current limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the
current is over the specified limit value, the CPU will automatically reduce the core
frequency for reducing the current.
3-23 BIOS Setup

M-FLASH
Important
M-Flash funcion allows you to update BIOS from USB flash disk (FAT32/ NTFS format
only), or allows the system to boot from the BIOS file inside USB flash disk (FAT/
FAT32 format only).
▶ BIOS Boot Function [Disabled]
Enables or disables the system to boot form USB flash disk with BIOS file.
[Enabled] Enables the system to boot from the BIOS within USB flash disk.
[Disabled] Enables the system to boot from the BIOS within ROM on motherboard.
*This may cause system unstable, MSI recommend it only for power users.
▶ Select one file to boot
Selects a BIOS file in the USB flash disk (NTFS/ FAT 32 format) to boot the system.
This item will selectable when the “BIOS Boot function” is enabled.
▶ Save BIOS to storage
Saves the current BIOS file to the USB flash disk. The USB flash disk drive should be
in FAT32 format.
Chapter 3
▶ Select one file to update BIOS and ME

Selects a BIOS file, includes the ME management settings, in the USB flash disk
(NTFS/ FAT 32 format) to update the BIOS and ME. The system will reboot after
updating.
BOIS Setup 3-24

OC PROFILE
▶ Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press <Enter> to enter the sub-
menu.
▶ Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Names the current overclocking profile.
▶ Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Saves the current overclocking profile.
▶ Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Loads the current overclocking profile.
▶ Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Clears the current overclocking profile.
▶ OC Profile Load from ROM
Loads OC profile from ROM.
▶ OC Profile Save to USB
Saves OC profile to the USB flash disk drive. The USB flash disk should be FAT32
format only. Chapter 3
▶ OC Profile Load from USB
Loads OC profile from the USB flash disk drive. The USB flash disk should be FAT32
format only.
3-25 BIOS Setup

HARDWARE MONITOR
Current Temperature & Speed
information
Fan
control field
Setting
Buttons
Voltage
display
▶ Current Temperature & Speed information

Shows the current CPU temperature, system temperature and fans' speeds.
▶ Fan control field
This motherboard provides a fan speed control feature call “Smart Fan Mode”.
Please check the “Smart Fan Mode” to enable the Smart Fan Mode. Smart Fan Mode
automatically controls fan speed depending on the current CPU temperature and to
keep it with a specific operating speed. When the current CPU temperature is over/
under the setting temperature, the CPU/ system fan will run at the corresponding
Chapter 3
speed. In this field, you can set the CPU/ system fan speed and the target
temperatures by moving the square.
Important
The changed settings will become effective after you save the changes and reboot the
system.
▶ Function Buttons
[All Full Speed] Sets all CPU/ system fans to run at full speed.
[All Set Default] Sets all CPU/ system fans to run at default speed.
[All Set Cancel] Discards current all changes and restore to the previous values.
▶ Voltage display
Shows the current voltages of CPU, system and memory.
BOIS Setup 3-26

Appendix A
Realtek Audio
The Realtek audio provides 10-channel DAC that simultaneously supports 7.1
sound playback and 2 channels of independent stereo sound output (multiple
streaming) through the Front-Out-Left and Front-Out-Right channels.
Software Configuration
After installing the audio driver (see Chapter 1 - Driver and Utilities), the “Realtek HD
Audio Manager” icon will appear at the notification area (lower right of the screen).
Appendix A
You may double click the icon and the GUI will pop up accordingly.
double click the icon
It is also available to enable the audio driver by clicking the Realtek HD Audio
Manager from the Control Panel.
Software panel overview

The following figure describes the function of the Realtek HD Audio Manager panel.
Device Selection Application Enhancement
Volume Adjustment Jack status panel
Realtek Audio A-2

▶ Device Selection
Here you can select a audio output source to change the related options. The “check”
sign (in orange) indicates the devices as default.
▶ Volume Adjustment
Appendix A
You can control the volume or balance the right/left side of the speakers that you
plugged in front or rear panel by adjust the bar.
▶ Application Enhancement
The array of options will provide you a complete guidance of anticipated sound effect
for both output and input device.
▶ Jack status panel
This panel depicts all render and capture devices currently connected with your
computer.
Auto popup dialog

When you plug into the device at the jack, a dialogue window will pop up asking you
which device is current connected.
As you know, each jack corresponds to its default setting, you can refer to the next
section “Hardware Default Setting”.
A-3 Realtek Audio

Hardware Default Setting
The following diagrams are audio back panel default setting.
Appendix A
■ Backpanel audio jacks to 2-channel speakers diagram
Fro
nt
Fro
nt
Rea
r
Realtek Audio A-4

Fro
nt
Appendix A
Cen Rea
ter r
&S
ubw
oof
er
Fro
nt
Cen Rea
ter r
&S
ubw
oof
S id er
eS
urro
und
A-5 Realtek Audio

Appendix B
Intel RAID
This appendix will assist users in configuring and enabling RAID functionality
and accelerating system on platforms
Introduction
The motherboard comes with the Intel RAID controller that allows you to configure
SATA hard drives as RAID sets.
SATA hard drives deliver blistering transfer speeds up to 6 Gb/s. Serial ATA uses
long, thin cables, making it easier to connect your drive and improving the airflow
inside your PC. The most outstanding features are:
1. Supports 3 Gb/s or 6 Gb/s transfers with CRC error checking.
2. Supports Hot-plug-n-play feature.
3. Data handling optimizations including tagged command queuing, elevator seek
and packet chain command.
Intel® RAID controller offers RAID level 0 (Striping), RAID level 1 (Mirroring and
Duplexing), RAID level 5 (Block Interleaved Distributed Parity), RAID level 10 (A Stripe
Appendix B
of Mirrors) , Intel® Rapid Storage Technology.

RAID 0 breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly improves I/O
performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and
provides enhanced read performance.
RAID 5 Provides data striping at the byte level and also stripe error correction
information. This results in excellent performance and good fault tolerance. Level 5 is
one of the most popular implementations of RAID.
RAID 10 Not one of the original RAID levels, multiple RAID 1 mirrors are created, and
a RAID 0 stripe is created over these.
Intel® Rapid Storage Technology is the advanced ability for two RAID volumes to share
the combined space of two hard drives being used in unison.
Intel® Rapid Storage Technology utilizes RAID 1 functionality to copy data from a
designated Master drive to a designated Recovery drive. The size of the Master drive
must be less than or equal to the size of the Recovery drive. When a Recovery volume
is created, complete capacity of the Master drive will be used as the Master volume.
Only one Recovery Volume can exist on a system. There are 2 methods of updating
the data on the Master to the Recovery drive. They are Continuous Update Policy and
On Request Update Policy.
Important
The least number of hard drives for RAID 0, RAID 1, Recovery or Matrix mode is 2.
The least number of hard drives for RAID 10 mode is 4. And the least number of hard
drives for RAID 5 mode is 3.
All the information/ volumes/ pictures listed in your system might differ from the
illustrations in this appendix.
Intel RAID B-2

Using Intel Rapid Storage Technology Option ROM
The Intel Rapid Storage Technology Option ROM should be integrated with the
system BIOS on all motherboards with a supported Intel chipset. The Intel Rapid
Storage Technology Option ROM is the Intel RAID implementation and provides BIOS
and DOS disk services. Please use <Ctrl> + keys to enter the “Intel® RAID for
Serial ATA” status screen, which should appear early in system boot-up, during the
POST (Power-On Self Test). Also, you need to enable the RAID function in BIOS to
create, delete and reset RAID volumes.
Creating, Deleting and Resetting RAID Volumes:

The Serial ATA RAID volume may be configured using the RAID Configuration utility
stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the
following message will appear for a few seconds.
Appendix B
Important
The “Device Model”, “Serial #” and “Size” in the following example might be different
from your system.
RAID Volumes
None defined.
Physical Disks:
Port Device Model Serial # Size Type/Status(Vol ID)
1 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Non-RAID Disk
2 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Non-RAID Disk
Press <CTRL-I> to enter Configuration Utility..
After the above message shows, press <Ctrl> and keys simultaneously to enter
the Intel Rapid Storage Technology Option ROM.
Important
The following procedure is only available with a newly-built system or if you are
reinstalling your OS. It should not be used to migrate an existing system to RAID.
B-3 Intel RAID

After pressing the <Ctrl> and keys simultaneously, the following window will
appear:
[ [ MAIN
MAIN MENU ] ]
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume 5. Acceleration Options
3. Reset Disks to Non-RAID 6. Exit
[ DISK / VOLUME INFORMATION ]
RAID Volumes :
None defined.
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk
Appendix B
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
■ Create RAID Volume

1. Select option 1 “Create RAID Volume” and press <Enter> key. The following
screen appears. Then in the Name field, specify a RAID Volume name and then
press the <TAB> or <Enter> key to go to the next field.
2. Use the arrow keys to select the RAID level best suited to your usage model in
RAID Level.
[ CREATE VOLUME MENU ]

Name : Volume0
RAID Level : RAID1(Mirror)
Disks : Select Disks
Strip Size : N/A
Capacity : XXX.X GB
Sync : N/A
Create Volume
[ HELP ]
RAID 1 : Mirrors data (redundancy) .
[ ↑↓] - Change [TAB] - Next [ESC] - Previous Menu [ENTER] - Select
Intel RAID B-4

3. In the Disk field, press <Enter> key and use <Space> key to select the disks you
want to create for the RAID volume, then click <Enter> key to finish selection. This
field will become available according to the selected RAID level.
4. Then select the strip size for the RAID array by using the “upper arrow” or “down
arrow” keys to scroll through the available values, and pressing the <Enter> key
to select and advance to the next field. The available values range from 4KB to
128 KB in power of 2 increments. The strip size should be chosen based on the
planned drive usage. Here are some typical values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB. This field will become available
according to the selected RAID level.
5. Then select the capacity of the volume in the Capacity field. The default value is
the maximum volume capacity of the selected disks.
Appendix B
Name : Volume0
RAID Level : RAID1(Mirror)
Disks : Select Disks
Strip Size : N/A
Capacity : XXX.X GB
Sync : N/A
Create Volume
[ HELP ]
The default value indicates the maximum capacity using the selected
disks. Entering a lower capacity allows you to create a second
volume on these disks.
Important
Since you want to create two volumes, this default size (maximum) needs to be
reduced. Type in a new size for the first volume. As an example: if you want the
first volume to span the first half of the two disks, re-type the size to be half of what
is shown by default. The second volume, when created, will automatically span the
remainder of two hard drives.
B-5 Intel RAID

6. Go to the Create Volume field and press <Enter>, the following screen appears for
you to confirm if you are sure to create the RAID volume. Press <Y> to continue.

Name : Volume0
RAID Level :RAID1(Mirror)
Disks :
Select Disks
Strip Size :
N/A
Capacity :XXX.X GB
Sync :N/A
Create Volume
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
HELP
Are you sure you want to create] this volume? (Y / N) :
[
Appendix B
Press ENTER to create the specified volume.
7. Then the following screen appears to indicate that the creation is finished.
[ [ MAIN
MAIN MENU ] ]
2. Delete RAID Volume 5. Acceleration Options
3. Reset Disks to Non-RAID 6. Exit
[ DISK / VOLUME INFORMATION ]
RAID Volumes :
ID Name Level Strip Size Status Bootable
0 Volume0 RAID1(Mirror) N/A XXX.XGB Normal Yes
Physical Devices :
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Disk(0)
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Disk(0)
Intel RAID B-6

■ Delete RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID
drives will be lost.
Important
If your system currently boots to RAID and you delete the RAID volume in the Intel
RAID Option ROM, your system will become un-bootable.
Select option 2 Delete RAID Volume from the main menu screen and press
<Enter> key to select a RAID volume for deletion. Then press <Delete> key to
delete the selected RAID volume. The following screen appears.
Appendix B
[ DELETE VOLUME MENU ]
Name Level Drives Capacity Status Bootable
Volume0 RAID1(Mirror) 2 XXX.XGB Normal Yes
[ DELETE VOLUME VERIFICATION ]
ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)
HELP “Volume0”?
Are you sure you want to[ delete ] (Y / N) :
Deleting a volume will reset the disks to non-RAID.
WARNING : ALL DISK DATA WILL BE DELETED.

(This does not apply to Recovery volumes)
[ ↑↓] - Select [ESC] - Previous Menu [DEL] - Delete Volume
Press <Y> key to accept the volume deletion.
B-7 Intel RAID

■ Reset Disks to Non-RAID
Select option 3 Reset Disks to Non-RAID and press <Enter> to delete the RAID
volume and remove any RAID structures from the drives. The following screen
appears:
[ MAIN MENU ]
2. Delete RAID Volume [ RESET RAID DATA 4. ] Recovery Volume Options
Resetting RAID disk will 5. remove
Exit its RAID structures
and revert [ it DISK
to a / non-RAID
VOLUME INFORMATION
disk. ]
RAID VolumesWARNING
: : Resetting a disk causes all data on the disk to be lost.
None defined. (This does not apply to Recovery volumes)
PortDevices
Physical Drive : Model Serial # Size Status
1
Port Device XXXX-XXXXXXXX
Model Serial # XXXXXXXXXXXXXX XXX.XGB Member Disk
Size Type/Status (Vol ID)
Appendix B
1 2 XXXX-XXXXXXXXXXXXXXXXXXXXXX
XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
XXX.XGB MemberDisk
Non-RAID Disk
Select the disks that should be reset.
[ ↑↓] - Previous/ Next [SPACE] - Selects [ENTER] - Selection Complete
Use the <Space> key to select the disks and press <Enter> key. A confirmation
sentence will appear below, and then press <Y> key to accept the selection.
Important
• You will lose all data on the RAID drives and any internal RAID structures when you
perform this operation.
• Possible reasons to “Reset Disks to Non-RAID” could include issues such as
incompatible RAID configurations or a failed volume or failed disk.
Intel RAID B-8

■ Recovery Volume Options
Select option 4 Recovery Volume Options and press <Enter> to change recovery
volume mode. The following screen appears:
[ RECOVERY VOLUME OPTIONS ]

1. Enable Only Recovery Disk
2. Enable Only Master Disk
[ HELP ]
Enable Only Recovery Disk - enables recovery disk if available and

disables master disk.
Enable Only Master Disk - enables master disk if available and
Appendix B
disables recovery disk.
Actions will result in change from Continuous Update mode to On-Request.
[ ↑↓] - select [ESC] - Previous Menu [ENTER] - Select
Recovery mode will change from Continuous Update to On-Request after you
enable “Only Recovery Disk” or “Only Master Disk”.
B-9 Intel RAID

Degraded RAID Array
A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard
drive members fails or is temporarily disconnected, and data mirroring is lost. As a
result, the system can only utilize the remaining functional hard drive member. To
re-establish data mirroring and restore data redundancy, refer to the procedure below
that corresponds to the current situation.
Missing Hard Drive Member
1. Make sure the system is powered off.
2. Reconnect the hard drive.
3. Reboot the system to Windows; the rebuild will occur automatically.
Failed Hard Drive Member
1. Make sure the system is powered off.
Appendix B
2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system to Intel RAID Option ROM by press <Ctrl> and keys
simultaneously during the Power-On Self Test (POST).
RAID Volumes
ID Name Level Strip Size Status Bootable
0 Volume0 RAID 1(Mirror) N/A XXX.XGB Degraded Yes
Physical Disks:
Port Device Model Serial # Size Type/Status(Vol ID)
1 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Member Disk (0)
2 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Member Disk (0)
Press <CTRL-I> to enter Configuration Utility..
4. Select the port of the destination disk for rebuilding, and then press ENTER.
[ MAIN MENU ]
[ DEGRADED VOLUME DETECTED ]
2. Delete RAID Volume 4. Recovery Volume Options
“Degraded” volume and disk available
5. for rebuilding detected. Selecting
Exit
a disk initiates a rebuild. Rebuild completes in
[ DISK / VOLUME INFORMATION the operating
] system.
RAID Volumes :
Select the port of the destination disk for rebuilding (ESC to exit):
None defined.
Port Drive Model Serial # Size
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Physical Devices :
[ ↑↓] - Previous/ Next [ENTER] - Select [ESC] - Exit
Intel RAID B-10

5. Exit Intel RAID Option ROM, and then reboot to Windows system.
6. When prompted to rebuild the RAID volume, click ‘Yes’.
7. The Intel Rapid Storage Technology application will be launched. Right-click
the new hard drive and select ‘Rebuild to this Disk’. The ‘Rebuild Wizard’ will be
launched which will guide you through the process of rebuilding to the new hard
drive.
Appendix B
B-11 Intel RAID

System Acceleration (optional)
Intel® Rapid Storage Technology use a SSD as a cache. Which can store frequently
used data without having to use a slow virtual disk or depend on RAM. The SSD
cache with the advantages of high-speed read/write and non-volatile memory to
accelerate the system performance.
Important
Check your SSD manufacturer's website, upgrade firmware in order to support Intel®
Rapid Storage Technology.
Intel® Rapid Storage Technology can only work with RAID mode. Even though there is
only one hard drive, you must set the SATA Mode to RAID in BIOS. The OS must be
Appendix B
installed in the RAID ready disk in order to use the SSD caching.
Follow these steps to enable system acceleration. If Windows has been installed in
RAID mode, skip to the step 5.
1. Reboot and enter the BIOS steup.
2. Set the SATA Mode to RAID in BIOS.
3. Install Windows operating system.
4. Insert the MSI Driver DVD into the DVD-ROM drive.
5. Install Intel RAID driver
6. Powered off.
7. Connect the SSD.
8. Reboot the system to Windows.
Intel RAID B-12

9. Run Intel Rapid Storage Technology application.
10. Click "Enable acceleration" under Accelerate tab.
Click here
11. Select the acceleration options.
Appendix B
12. Click OK and reboot the system.
The page refreshes and reports the new acceleration configuration in the Acceleration
View.
Important
You can click “More help on this page” or "More help" of the Intel® Rapid Storage
Technology application to view more information.
B-13 Intel RAID

RST Synchronization (optional)
If you are using Maximized mode as the Acceleration mode, the data on the hard disk
is not always synchronized with the data in the SSD cache. In some situations, you
may want to manually sync the disks for avoiding data loss.
Follow these steps to sync manually.

1. Reboot system, during the Power-On Self Test (POST) press, press <Ctrl> and
 keys simultaneously to enter the Intel Rapid Storage Technology Option ROM.
2. Select option 5 “Acceleration Options” and press <Enter> key. The following
screen appears.
[ ACCELERATION OPTIONS ]
Appendix B
Name Type Capacity Mode Status

DISK PORT 0 Non-RAID Disk 153.4GB Maximized No Sync
[ HELP ]
Press 's' to synchronize data from the cache device to

the Accelerated Disk/Volume.
Press 'r' to remove the Disk/Volume Acceleration.
WARNING: IT IS RECOMMENDED THAT YOU [ERFORM A SYNCHRONIZATION

BEFORE REMOVING ACCELERATION.
[ ↑↓] - Select [ESC] - Previous Menu
3. Press <S> to synchronize data.
[ SYNCHRONIZATION VERIFICATION ]
5. MAY
SYNCHRONIZING THE DATA Exit TAKE SEVERAL MINUTES.
[ DISK
DO / VOLUME INFORMATION
NOT INTERRUPT ]
THE PROCESS!
Are you sure you want to synchronize data to

"DISK PORT 0"? (Y/N):
4. When prompted, press <Y> to confirm.
[ ACCELERATION OPTIONS ]
Name Type Capacity Mode Status
DISK PORT 0 Non-RAID Disk 153.4GB Maximized In Sync
5. Once synchronization is complete, the status will change to In Sync.
Intel RAID B-14

Appendix C
Intel SBA (optional)

Intel® Small Business Advantage (Intel® SBA) provides an out-of-the-box
hardware-based security and productivity suite designed for the small
business user. Intel SBA includes a customizable user interface and several
bundled Intel applications.
Prerequisites
■ Supported Operating Systems
Intel SBA supports following OS:
■ Windows 7 32bit/ 64bit
■ Windows 8 32bit/ 64bit
■ Windows 8.1 32bit/ 64bit
■ Required User Permissions
You must run the installer and the customization wizard with a user that has local
administrator permissions on the computer.
■ Windows Update Settings
In certain conditions, the Windows Update task in the PC Health Center application is
disabled and cannot be enabled. This can occur if Intel SBA is installed on a computer
where Windows Update was disabled during installation of the Windows operating
system. The Windows Update task is shown in the GUI but is grayed out (disabled).
Even if the end user enables Windows Update in the operating system, the PC Health
Center task cannot be enabled. This means that the end user cannot use PC Health
Center to manage Windows Update.
To prevent this, make sure that you do NOT select the Never check for updates option
when installing the Windows operating system.
■ Windows Task Scheduler
Appendix C
Some PC Health Center tasks are applications that can also be used directly from
the operating system and scheduled via the Windows Task Scheduler. When a task
is set via PC Health Center, an alarm clock is set that will wake up the computer if it
is turned off. Defining a scheduled time for an application/task outside of PC Health
Center does not set an alarm clock. This means that the computer will not be woken
up to do the task.
For this reason, it is NOT recommended to define schedules for these applications:
■ Windows Updates
■ Windows Backup and Restore
■ Disk defragmentation
Instead, let the end user set the schedule for all these tasks via PC Health Center.
Intel SBA C-2

Installing Intel SBA
This procedure describes how to install Intel SBA.
■ To install Intel SBA:
1. Logon to the computer with a user that has administrator privileges.
2. Insert the application DVD into the DVD-ROM drive. The setup screen will
automatically appear.
3. Click OTHERS tab.
4. Select Intel SBA to start installing.
5. Follow the on-screen instructions to install.
Software Configuration
After installation of the Intel SBA software is complete, the Intel SBA service is started.
The desktop, system tray, and programs menu include shortcuts to the GUI of Intel
SBA.
Software panel overview

The following figure describes the function of the Intel SBA control panel.
Appendix C
Tabs Selection
Applications Selection Applications Description
C-3 Intel SBA

Password settings
By default, the system is in an unconfigured state. Before the hardware capabilities
can be used by Intel SBA software, the system must be configured. This is done in the
Settings > Password Settings tab in the main menu of the GUI.
Appendix C
Fill out the form to create the new password and click “Save”. You will be asked to
enter the password when you want to start using Intel SBA.
Important
• Upon completion of the password settings, please keep your password secure.
• Please remember your answers to the security questions.
Help Button
There is a help button on the top right. If you need to know detailed introductions.
Just click on the help button, to get the information.
Intel SBA C-4

Manual h97 Asrock

Uploaded by

Copyright:

Available Formats

Manual h97 Asrock

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manual h97 Asrock

Uploaded by

Copyright:

Available Formats

Preface

Visit the MSI website for technical guide, BIOS

Contact our technical staff at:

￭ Lay this equipment on a reliable flat surface before setting it up.

European Community Compliance Statement

Taiwan Wireless Statements

Japan VCCI Class B Statement

Korea Warning Statements

CAUTION: There is a risk of explosion, if battery is incorrectly replaced.

Chemical Substances Information

remind you that...

elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik

JAUD1: Front Panel Audio Connector��������������������������������������������������������� 1-25

Drivers & Utilities Motherboard

Getting Started 1-2

1-3 Getting Started

Expansion ■ 1x PCIe 3.0 x16 slot (PCI_E2 , supports x16 speed)

Storage ■ Intel Z97/ H97 Express Chipset

USB ■ Intel Z97/ H97 Express Chipset

Audio ■ Realtek® ALC892 Codec

Getting Started 1-4

1-5 Getting Started

Factor ■ 12 in. x 8.7 in. (30.5 cm x 22 cm)

For the latest information about CPU, please visit

For more information on compatible components, please visit

Getting Started 1-6

1-7 Getting Started

Back Panel 1-9

CPU LGA1150 CPU Socket 1-11

CPUFAN1,SYSFAN1~3 Fan Power Connectors 1-21

DIMM1~4 Memory Slots 1-15

JAUD1 Front Panel Audio Connector 1-25

JBAT1 Clear CMOS Jumper 1-27

JCI1 Chassis Intrusion Connector 1-24

JCOM1 Serial Port Connector 1-26

JFP1, JFP2 System Panel Connectors 1-22

JLPT1 Parallel Port Connector 1-26

JPWR1~2 ATX Power Connectors 1-17

JTPM1 TPM Module Connector 1-26

JUSB1~2 USB 2.0 Expansion Connectors 1-23

JUSB3 USB 3.0 Expansion Connector 1-24

M2_1 M.2 Port 1-25

PCI_E1~6 PCIe Expansion Slots 1-18

SATA1~6 SATA Connectors 1-20

Getting Started 1-8

DisplayPort Line-Out CS-Out

Link/ Activity LED Yellow Linked

Off 10 Mbps connection

Speed LED Green 100 Mbps connection

Orange 1 Gbps connection

1-9 Getting Started

function of the connector.

Getting Started 1-10

Introduction to the LGA 1150 CPU

1-11 Getting Started

Getting Started 1-12

1-13 Getting Started

CPU fan connector

Getting Started 1-14

JAUD1: Front Panel Audio Connector�� 1-25