ANT-AMB4520R0-1433 Datasheet - Multisector
ANT-AMB4520R0-1433 Datasheet - Multisector
ANT-AMB4520R0-1433 Datasheet - Multisector
2MX-1710-2690-33-20.5i-M-R
EasyRET Single-Band Dual-Beam Antenna with Integrated RCU - 1.4m
Antenna Specifications
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
Gain (dBi)
19.0 19.2 18.8 19.5 19.7 19.3 19.7 20.0 19.5 19.7 20.2 19.5
Side lobe suppression for first side lobe 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
above main beam (Typ.) (dB) 20 18 16 20 17 16 20 17 17 20 17 15
Horizontal 3dB beam width (°) 34 31 29 27
Vertical 3dB beam width (°) 6.3 5.9 5.1 4.6
Horizontal side lobe suppression (Typ.) (dB) 23 23 22 22
VSWR < 1.5
Horizontal beam centers (°) ± 30
Gain roll-off at boresight (dB) Avg. -11
Isolation between ports (dB) Same beam: ≥ 28
Front to back ratio, copolar (dB) Typ. 32
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Max. power per input (W) 250 (at 50℃ ambient temperature)
Impedance (Ω) 50
Grounding DC Ground
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1468 x 349 x 166
Packing dimensions (H x W x D) (mm) 1870 x 415 x 240
Antenna weight (kg) 18.5
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 29.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
1286
1468
Accessories
Item Model Description Weight Units per antenna
1
AMB4520R0
2MX-1710-2690-33-20.5i-M-R
EasyRET Single-Band Dual-Beam Antenna with Integrated RCU - 1.4m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 2 Issue: 2014-12-08