A264518R0 - 2.3 - 14 - 65 - RET - XP UWB - Datasheet
A264518R0 - 2.3 - 14 - 65 - RET - XP UWB - Datasheet
A264518R0 - 2.3 - 14 - 65 - RET - XP UWB - Datasheet
DX-1710-2690-65-18i-M-R
EasyRET Single-Band Antenna with 1 Integrated RCU
U - 1.4m
Antenna Specifications
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt ((°)) 0 - 12 , continuously adjustable
0° 6° 12° 0° 6° 12° 0° 6° 12° 0° 6° 12°
Gain (dBi)
17.4 17.4 17.2 18.0 18.1 17.6 18.5 18.7 18.0 18.5 18.8 18.2
Side lobe suppression (Typ.) (dB) 0° 6° 12° 0° 6° 12° 0° 6° 12° 0° 6° 12°
-for first side lobe above main beam 18 18 17 18 18 17 18 18 17 18 18 17
-within 0° - 15° sector above horizon 15 16 15 15 16 15 16 16 15 16 16 15
Horizontal 3dB beam width (°) 67 64 60 60
Vertical 3dB beam width (°)
( ) 6.6 6.0 5.4 4.9
VSWR < 1.5
Isolation between ports (dB) ≥ 30
Front to back ratio, copolar (dB) Typ. 28
0° Typ. 20
Cross polar ratio (dB)
±60° Typ. 10
Max. power per input (W) 250 (at 50℃ ambient temperature)
Intermodulation IM3 ((dBc)) ≤ -153 ((2 x 43 dBm carrier))
Squint (°) Typ. 3.0
Tracking (dB) Typ. 2.0 (within 10dB HBW)
Impedance (Ω) 50
Grounding DC Ground
Mechanical Properties
A t
Antenna dimensions
di i (H x W x D) (mm)
( ) 1365 x 155 x 109
Packing dimensions (H x W x D) (mm) 1710 x 210
2 x 180
Antenna weight (kg) 7
7.4
Clamps weight (kg) 2.0 (2
2 units)
Antenna packing weight (kg) 13.1 (Inclu
uded clamps)
Mast diameter supported (mm) 38 - 115
Radome material Fibe
erglass
Radome colour Ligh
ht grey
Operational temperature (℃) -40 .. +65
Frontal: 215 (at 150 km/h)
Wind load (N) Lateral: 200 (at 150 km/h)
Rear side: 370 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 2
200
Connector 2 x 7/16 DIN
D Female
Connector position Bo
ottom
Accessories
Item Model Description Weigh
ht Units per antenna
1
A264518R0
DX-1710-2690-65-18i-M-R
EasyRET Single-Band Antenna with 1 Integrated RCU
U - 1.4m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface
interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a ven ndor defined command. For more details about protocol switching function,
contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
y – Yellow