Nothing Special   »   [go: up one dir, main page]

Use Ups Power Single Phase Winner Pro

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

On-line UPS

USE UPS POWER | SINGLE PHASE

Winner Pro+
• True double-conversion • ECO mode for energy saving only
• Microprocessor control optimizes available for 1-3KVA models
reliability • Generator compatible
• Input power factor correction • Smart SNMP works well with either
• Output power factor 0.9 USB or RS-232 together

• Wide input voltage • Comprehensive display allows easy


monitoring and access of
• Converter mode available
• UPS status
• Adjustable battery numbers

Winner Pro+ Online UPS Selection Guide


MODEL Winner Pro+ 1K (L) Winner Pro+ 2K (L) Winner Pro+ 3K (L) Winner Pro+ 6K (L) Winner Pro+ 10K (L)
PHASE Single phase with ground
CAPACITY * 1000 VA / 900 W 2000 VA / 1800 W 3000 VA / 2700 W 6000VA / 5400W 10000 VA / 9000 W
INPUT
Nominal Voltage 110/115/120/127VAC or 208/220/230/240VAC 208/220/230/240VAC
60-145 VAC or 120-300 VAC (Based on load at 50%) 110-300 VAC (Based on load at 50%)
Input Voltage Range
90-145 VAC or 180-300 VAC (Based on load at 100%) 176-300 VAC (Based on load at 100%)
Frequency Range 40 Hz ~ 70 Hz 46~54 Hz or 56~64 Hz
Power Factor ≧ 0.99 @ Nominall Voltage (100% load)
OUTPUT
Output Voltage 110/115/120/127VAC or 208/220/230/240VAC 208/220/230/240VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 47~ 53 Hz or 57 ~ 63 Hz 46~54 Hz or 56~64 Hz
Frequency Range (Batt. Mode) 50 Hz or 60Hz ± 0.5% 50 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio 3:1
≦ 3 % THD (Linear Load) ≦ 3 % THD (Linear Load)
Harmonic Distortion
≦ 6 % THD (Non-linear Load) ≦ 5 % THD (Non-linear Load)
Transfer AC Mode to Battery Mode Zero
Time Inverter to Bypass 4 ms (Typical) Zero
Waveform (Batt. Mode) Pure Sinewave
EFFICIENCY
AC Mode 88% 89% 90% 92% 93%
Battery Mode 83% 87% 88% 90% 91%
BATTERY
Battery Type 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah
Numbers 2 3 4 6 6 16 20 16 20
Standard
Typical Recharge Time 4 hours recover to 90% capacity 9 hours recover to 90% capacity
Model
Charging Current (max.) 1A 1A/2A
Charging Voltage 27.4VDC ± 1% 41.0VDC ± 1% 54.7 VDC ±1% 82.1 VDC ±1% 82.1 VDC ±1% 218.4 VDC±1% 273VDC ±1% 218.4 VDC±1% 273VDC ±1%
Battery Type Depending on applications
Long-run Numbers 3 6 6 16 ~ 20 (Adjustable)
Model ** Charging Current (max.) 1.0A/2.0A/4.0A/6.0 A 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries)
Charging Voltage 41.0 VDC ±1% 82.1 VDC ±1% 82.1 VDC ±1% 273 VDC ±1% (Based on 20pcs batteries)
INDICATORS
LCD Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators
ALARM
Battery Mode Sounding every 4 seconds
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding

SUPPORT@USEUPSPOWER.COM WWW.USEUPSPOWER.COM
PHYSICAL
282x145 397x145 397 x 145
Standard Dimension, D x W x H (mm) x220 x220 x 220
421 x 190 x 318 421 x 190 x 318 369 x 190 x 688 442 x 190 x 688
Model
Net Weight (kgs) 9.8 11.4 17 26.2 27.6 61 74 66 76

Long-run Dimension, D x W x H (mm) 282 x 145 x 220 397 x 145 x 220 369 x 190 x 318 442 x 190 x 318
Model **
Net Weight (kgs) 4.4 6.8 7.6 12 16
ENVIRONMENT
0-95% RH @ 0-50°C 0-95% RH @ 0-40°C
Humidity 20-90 % RH @ 0- 40°C (Non-condensing)
(non-condensing) (non-condensing)
Noise Level Less than 50dB @ 1 Meter Less than 55dB @ 1 Meter Less than 58dB @ 1 Meter
MANAGEMENT
Smart RS-232 / USB Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux and MAC
Optional SNMP Power management from SNMP manager and web browser
*1-3KVA: Derate to 70% of capacity in Frequency converter mode or when the output voltage is adjusted to 208VAC
6-10KVA: Derate to 60% of capacity in Frequency converter mode and to 90% when the output voltage is adjusted to 208VAC
**Long-run model is only available in 208/220/230/240VAC systems.

SUPPORT@USEUPSPOWER.COM WWW.USEUPSPOWER.COM

You might also like