E19 Excavators

Specifications

Weights Working Range

Operating weight with cab and bucket (ISO 6016) 1885 kg
Transport mass (no attachment) 1768 kg
Weight reduction with canopy -96 kg
Additional weight for long dipperstick 6 kg
Additional weight for counterweight 50 kg
Ground pressure with rubber tracks 32.40 kPa
Engine
Make / model Kubota / D722-E4B-BCZ-7
Fuel Diesel
Number of cylinders 3
Displacement 719 cm3
Maximum power @ 2500 rpm (ISO 14396) 10.2 kW
Maximum torque (SAE) 43.5 Nm
Hydraulic System
Pump type Dual piston pump with gear pump
Pump capacity 41.30 L/min
Values marked with * - Long dipperstick
Piston pump capacity 30.00 L/min
Auxiliary flow 30.00 L/min (A) 196.0° (G) 2564.0 mm
Auxiliary relief 180.0 bar (B) 4084.0 mm (H) 3573.0 mm
(B*) 4257.0 mm (H*) 3701.0 mm
Performance (C) 4039.0 mm (I) 2566.0 mm
Digging force, dipperstick (ISO 6015) 10371 N (C*) 4214.0 mm (I*) 2693.0 mm
Digging force, long dipperstick (ISO 6015) 9279 N (D) 1542.0 mm (J) 1948.0 mm
Digging force, bucket (ISO 6015) 20835 N (D*) 1561.0 mm (J*) 2115.0 mm
Drawbar pull 19380 N (E) 220.0 mm (K) 2385.0 mm
Travel speed, low range 2.7 km/h (F) 204.0 mm (K*) 2565.0 mm
Travel speed, high range 4.2 km/h Dimensions
Slew System
Boom swing, left 80.0°
Boom swing, right 60.0°
Slew rate 8.4 RPM
Fluid Capacities
Cooling system 3.30 L
Engine lubrication plus oil filter 3.30 L
Fuel reservoir 19.00 L
Hydraulic reservoir 14.30 L
Hydraulic system 19.00 L
Environmental
Noise level LpA(EU Directive 2006/42/EC) 79 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 93 dB(A)
Whole body vibration (ISO 2631–1) 0.09 ms-2 (A) 235.0 mm (J) 980.0 mm
Hand-arm vibration (ISO 5349–1) 0.33 ms-2 (B) 419.0 mm (J*) 1360.0 mm
(C) 1340.0 mm (K) 2299.0 mm
Standard Features (D) 1114.0 mm (L) 230.0 mm
230 mm rubber track Hydraulic and travel control lockout (E) 1045.0 mm (M) 433.0 mm
980 mm dozer blade with two 190 mm blade extensions Hydraulic joystick controls (F) 2832.0 mm (N) 589.0 mm
Battery disconnect switch Hydraulically retractable undercarriage from 1360 mm to (G) 1476.0 mm (O) 1154.0 mm
Control console locks 980 mm (H) 3831.0 mm (P) 1009.0 mm
Cupholders Retractable seat belt (H*) 3812.0 mm (Q) 1801.0 mm
Double acting auxiliary hydraulics with quick couplers Storage compartment (I) 25.0 mm (R) 1645.0 mm
Engine monitor with auto shutdown TOPS/ROPS/FOPS canopy 1 Options
Exposed counterweight with 4 mm steel tailgate Two-speed travel
Foldable and ergonomic travel pedals 1st AUX hydraulic on arm Klac C and MS01 couplers
Upper structure four point tie down
Full fuel warning alarm 2nd AUX hydraulics LED lights set
Water separator
Grease gun holder Additional lights (2+1) Left and right mirror
Work light (boom)
Horn AM/FM MP3 stereo radio Long dipperstick with clamp
Warranty: 24 months, 2000 hours (whichever occurs first)
1. Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Beacon eyes
Object Protective Structure (FOPS) - Meets requirements of ISO 3449. Comfort package (Superior Long dozer blade
seat for canopy or cloth Object handling device
suspension seat for cab, (safety valves + overload
Autospeed shift, Aux and warning device + lifteye)
Off-set pilot control) Performance package
Demolition package (boom, (HD travel motors, add.
arm, bucket cylinder covers counterweight)
& HD travel hoses guard) Special applications kit
Fire extinguisher Travel motion alarm
Hydraulic clamp TOPS/ROPS/FOPS cab w/
Keyless ignition heater

B4PK 11001 — B4PK 99999 • 2020-8-4 • ©2020 Bobcat EMEA - www.bobcat.com/eu

Specifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment