Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    Konfigurasi Routing OSPF

    Uploaded by

    mumayiz
    - The document describes the configuration of routers R1 and R2 including interface IP addresses, OSPF routing protocol configuration, and validation of the OSPF neighbor relationship. Router R1 has interfaces on 192.168.0.0/24 and 30.56.164.0/30 networks, and Router R2 has interfaces on 30.56.164.0/30 and 110.200.200.0/29 networks. OSPF is configured on both routers to advertise the connected networks, and show commands confirm the routers have established an OSPF neighbor relationship on the shared 30.56.164.0/30 link.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Konfigurasi Routing OSPF

    Uploaded by

    mumayiz
    10 views4 pages
    - The document describes the configuration of routers R1 and R2 including interface IP addresses, OSPF routing protocol configuration, and validation of the OSPF neighbor relationship. Router R1 has interfaces on 192.168.0.0/24 and 30.56.164.0/30 networks, and Router R2 has interfaces on 30.56.164.0/30 and 110.200.200.0/29 networks. OSPF is configured on both routers to advertise the connected networks, and show commands confirm the routers have established an OSPF neighbor relationship on the shared 30.56.164.0/30 link.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    - The document describes the configuration of routers R1 and R2 including interface IP addresses, OSPF routing protocol configuration, and validation of the OSPF neighbor relationship. Router R1 has interfaces on 192.168.0.0/24 and 30.56.164.0/30 networks, and Router R2 has interfaces on 30.56.164.0/30 and 110.200.200.0/29 networks. OSPF is configured on both routers to advertise the connected networks, and show commands confirm the routers have established an OSPF neighbor relationship on the shared 30.56.164.0/30 link.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views4 pages

    Konfigurasi Routing OSPF

    Uploaded by

    mumayiz
    - The document describes the configuration of routers R1 and R2 including interface IP addresses, OSPF routing protocol configuration, and validation of the OSPF neighbor relationship. Router R1 has interfaces on 192.168.0.0/24 and 30.56.164.0/30 networks, and Router R2 has interfaces on 30.56.164.0/30 and 110.200.200.0/29 networks. OSPF is configured on both routers to advertise the connected networks, and show commands confirm the routers have established an OSPF neighbor relationship on the shared 30.56.164.0/30 link.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Router R1

    ==================================
    Router>en
    Router#conf t
    Enter configuration commands, one per line. End with CNTL/Z.

    Konfigurasi interface
    ===================================
    Router(config)#hostname R1
    R1(config)#int g0/1
    R1(config-if)#ip add 192.168.0.1 255.255.255.0
    R1(config-if)#no sh

    R1(config)#int g0/0
    R1(config-if)#ip add 30.56.164.1 255.255.255.252
    R1(config-if)#no sh
    R1(config-if)#ex

    Konfigurasi Routing Protocol OSPF


    ===================================
    R1(config)#router ospf 1
    R1(config-router)#net 30.56.164.0 0.0.0.3 area 0 (0.0.0.3 wildcard dari 255.255.255.0)
    R1(config-router)#net 192.168.0.0 0.0.0.255 area 0 (0.0.0.255 wildcard dari 255.255.255.0)
    R1(config-router)#^Z
    R1#

    Validasi OSPF
    ===================================
    R1#sh ip pr

    Routing Protocol is "ospf 1"


    Outgoing update filter list for all interfaces is not set
    Incoming update filter list for all interfaces is not set
    Router ID 192.168.0.1
    Number of areas in this router is 1. 1 normal 0 stub 0 nssa
    Maximum path: 4
    Routing for Networks:
    30.56.164.0 0.0.0.3 area 0
    192.168.0.0 0.0.0.255 area 0
    Routing Information Sources:
    Gateway Distance Last Update
    192.168.0.1 110 00:00:14
    Distance: (default is 110)

    R1#sh ip ro
    Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
    D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
    N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
    E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
    i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
    * - candidate default, U - per-user static route, o - ODR
    P - periodic downloaded static route
    Gateway of last resort is not set

    192.168.0.0/24 is variably subnetted, 2 subnets, 2 masks


    C 192.168.0.0/24 is directly connected, GigabitEthernet0/1
    L 192.168.0.1/32 is directly connected, GigabitEthernet0/1

    R1#sh ip ospf int

    GigabitEthernet0/1 is up, line protocol is up


    Internet address is 192.168.0.1/24, Area 0
    Process ID 1, Router ID 192.168.0.1, Network Type BROADCAST, Cost: 1
    Transmit Delay is 1 sec, State WAITING, Priority 1
    No designated router on this network
    No backup designated router on this network
    Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    Hello due in 00:00:00
    Index 1/1, flood queue length 0
    Next 0x0(0)/0x0(0)
    Last flood scan length is 1, maximum is 1
    Last flood scan time is 0 msec, maximum is 0 msec
    Neighbor Count is 0, Adjacent neighbor count is 0
    Suppress hello for 0 neighbor(s)
    R1#sh ip ospf data
    R1#sh ip ospf database
    OSPF Router with ID (192.168.0.1) (Process ID 1)

    Router Link States (Area 0)

    Link ID ADV Router Age Seq# Checksum Link count


    192.168.0.1 192.168.0.1 44 0x80000001 0x00b75e 1

    R1#sh ip ospf neig


    Ethernet IEEE 802.3
    FastEthernet FastEthernet IEEE 802.3
    GigabitEthernet GigabitEthernet IEEE 802.3z
    Loopback Loopback interface
    Serial Serial
    detail detail of all neighbors
    <cr>

    Router R2
    ==================================

    Konfigurasi interface
    ===================================
    Router(config)#hostname R1
    R1(config)#int g0/1
    R1(config-if)#ip add 110.200.200.1 255.255.255.248
    R1(config-if)#no sh

    R1(config)#int g0/0
    R1(config-if)#ip add 30.56.164.2 255.255.255.252
    R1(config-if)#no sh
    R2(config-if)#ex

    Konfigurasi Routing Protocol OSPF


    ===================================
    R2(config)#router ospf 1
    R2(config-router)#net 30.56.164.0 0.0.0.3 area 0  wildcard dari 255.255.255.252
    R2(config-router)#net 110.200.200.0 0.0.0.7 area 0  wildcard dari 255.255.255.248
    R2(config-router)#ex
    R2(config)#ex
    R2#

    Validasi OSPF
    ===================================
    R2#sh ip pr

    Routing Protocol is "ospf 1"


    Outgoing update filter list for all interfaces is not set
    Incoming update filter list for all interfaces is not set
    Router ID 110.200.200.1
    Number of areas in this router is 1. 1 normal 0 stub 0 nssa
    Maximum path: 4
    Routing for Networks:
    30.56.164.0 0.0.0.3 area 0
    110.200.200.0 0.0.0.7 area 0
    Routing Information Sources:
    Gateway Distance Last Update
    110.200.200.1 110 00:00:13
    192.168.0.1 110 00:00:50
    Distance: (default is 110)

    R2#sh ip ro
    Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
    D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
    N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
    E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
    i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
    * - candidate default, U - per-user static route, o - ODR
    P - periodic downloaded static route

    Gateway of last resort is not set

    30.0.0.0/8 is variably subnetted, 2 subnets, 2 masks


    C 30.56.164.0/30 is directly connected, GigabitEthernet0/0
    L 30.56.164.2/32 is directly connected, GigabitEthernet0/0
    110.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
    C 110.200.200.0/29 is directly connected, GigabitEthernet0/1
    L 110.200.200.1/32 is directly connected, GigabitEthernet0/1
    O 192.168.0.0/24 [110/2] via 30.56.164.1, 00:00:51, GigabitEthernet0/0

    R2#sh ip ospf int

    GigabitEthernet0/0 is up, line protocol is up


    Internet address is 30.56.164.2/30, Area 0
    Process ID 1, Router ID 110.200.200.1, Network Type BROADCAST, Cost: 1
    Transmit Delay is 1 sec, State BDR, Priority 1
    Designated Router (ID) 192.168.0.1, Interface address 30.56.164.1
    Backup Designated Router (ID) 110.200.200.1, Interface address 30.56.164.2
    Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    Hello due in 00:00:00
    Index 1/1, flood queue length 0
    Next 0x0(0)/0x0(0)
    Last flood scan length is 1, maximum is 1
    Last flood scan time is 0 msec, maximum is 0 msec
    Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor 192.168.0.1 (Designated Router)

    R2#sh ip ospf neighbor


    Neighbor ID Pri State Dead Time Address Interface
    192.168.0.1 1 FULL/DR 00:00:39 30.56.164.1 GigabitEthernet0/0

    R2#

    You might also like