1 2 3 4 5 6 7 8

76
SEE ISO MATERIAL LIST
PREEM DRG: M282181&MTC:003
WOOD DRG: 2300-52-AAA-BD-280-282181-01 PART No. COMPONENT DESCRIPTION N.S. (IN) SCHED RATING END PREP. QTY DET-UNIQUE/CLIENT CODE
LINE NO: 2"-BD-A54-1B-282181/0-NI
4 E 2023340 PIPE
EL +33908 N 6272125 1 PIPE, CS ASTM A333 GR 6 SCH=S-80 , 2 S-80 BE 16.1 M PIP-541SAL0063
EL +33854 02.00
S2
2"NPD FITTINGS
2"-BD-A54-1B-282470/0-NI 2 ECCENTRIC REDUCER, CS ASTM A420 WPL6 2X1 S-80 BE 1 ERE-551RAD0393
A 54 A
9 F6 G7 B8 SCH=S-80 SCH=S-80 , 02.00 x 01.00
116 3 WELDOLET, CS ASTM A350 LF2 CL1 SCH=S-80 2X3/4 BE 1 WOL-551WAC0207
15 SCH=S-160, 02.00 x 00.75
54 4
4 90 DEG LR ELBOW, CS ASTM A420 WPL6 2 S-80 BE 9 90E-551EAD0244
3 4 SCH=S-80 , 02.00
1
2X3/4"NPD
5 ECCENTRIC REDUCER, CS ASTM A420 WPL6 1X3/4 S-80 BE 1 ERE-551RAD0394
15
4 SCH=S-80 SCH=S-160, 01.00 x 00.75
FLANGES
S10 S11 6 WELD NECK FLANGE, CS ASTM A350 LF2 CL1 3/4 150 RFFE/BE 1 FLG-561WAC0142
AT-70A PG-30PE SCH=NREQD SCH=S-160, 00.75
A=480

1431
S12 A=380, B=100 GASKETS
S14 PG-17B SHOE ORIENT TOWARDS SOUTH 7 SPIRAL WOUND SS 316L/GRAPHITE, 4.5 mm, 3/4 150 S2 1 GAS-574SAK0032
S-2A A=223, B=350 LIMIT STOP BOTTOM MEMBER TO BE REMOVED 3.2 MM THK OUTER CS RING & INNER SS316L

5431
A=300, B=100 RING SCH=NREQD, 00.75
4 25 BOLTS
B 09 B
8 STUDBOLTS, ASTM A320 GR L7 / ASTM A194 1/2 4 STU-572SBM0004
4 GR7 - 65.0 MM LENGTH

1
1 VALVES / IN-LINE ITEMS
EL +28080 33
0
9 BLIND FLANGE, CS ASTM A350 LF2 CL1 3/4 150 RFFE 1 FBL-561BAC0018
SCH=NREQD, 00.75

1
S14 PIPE SUPPORTS

396
S-2A 10 WEAR PAD, AT-70 2 1 AT-70A
A=300, B=100 S15 11 LINE STOPS FOR VARIABLE HEIGHT SHOE, 2 1 PG-30PE
S16 PG-1 S13
3498 PG-30
PS-7A PS-1B
8 4 12 FROM ADJACENT VESSEL OR STRUCTURE, 2 1 PG-17B
A=350, B=75, C=295 44 A=500
EL +28477 PG-17
S16 13 CANTILEVER BRACKET FROM ADJACENT STEEL 2 3 PS-1B
4 1 18 PS-7A OR VESSEL, PS-1A/B
46
A=425, B=100, C=255 14 WELDED SHOE, 2"-8", 300MM LONG, S-2A 2 4 S-2A
C 15 GUIDE FOR INSULATED HORIZONTAL PIPING, 2 2 PG-1 C
PG-1
4 S14 16 T-SUPPORT FROM ADJACENT STEEL, PS-7A 2 2 PS-7A
S-2A 17 TICO PIPE GRIP (U-BOLT), AT-93 2 1 AT-98

1
A=300, B=100

1218
S13 S15 4
PS-1B PG-1 EL +26863
S17
A=375 28
220

AT-98
1
8
2 24
2X1"NPD 1173
1 1
13MM OFFSET 2"NPD 76 S13
51
FLAT SIDE S 33 26 PS-1B
9 13
A=400
5 4
1X3/4"NPD
D 3MM OFFSET CLASS:
D
FLAT SIDE S STEM EAST A54-1B
SEE ISO CLASS:
PREEM DRG: M282468&MTC:001 A54-6B
WOOD DRG: 2300-52-AAA-PR-280-282468-01
LINE NO: 0.75"-PR-A54-6B-282468/0-NI
S14
E 2020800 S2
N 6266111 S-2A
A=300, B=100
EL +25563

S2

E E

CREATED BY S3D ISOGEN. PIPELINE NAME: AAA-28-BD-282470-01

NOTES:
F 1. FOR PIPE SUPPORT STANDARD REFER TO WOOD DOC.NO.: 2300-8230-SP-000-0023. F
ALL MATERIAL REQUIRED TO FABRICATE PIPE SUPPORTS SHALL BE SUPPLIED BY THE MECHANICAL CONTRACTOR EXCEPT FOR PIPE TRUNNIONS AND WHERE NOTED.
2. ALL FLANGE BOLT HOLES SHALL STRADDLE CENTRE LINES UNLESS INDICATED OTHERWISE.
3. UNLESS OTHERWISE NOTED, ALL DIMENSIONS ARE TO FACE OF FLANGE OR CENTRE LINE OF PIPE. DIMENSIONS ARE IN MILLIMETRES. S2 02/03/23 ISSUED FOR CONSTRUCTION s.arumugam3 v.subramanian kannan.palaniyandi sriramana.palla2 - s.abhayankaran

4. FIELD WELDS (FW) AND FIELD FIT WELDS (FFW) HAVE BEEN SHOWN ON THE ISOMETRIC TO GIVE GUIDANCE TO THE CONTRACTOR
THE CONTRACTOR SHOULD CONFIRM THE POSITION OF FFWs DURING CONSTRUCTION TO SUIT SPOOLING AND ERECTION
AN ADDITIONAL PIPE LENGTH OF 150mm HAS BEEN INCLUDED IN THE BILL OF MATERIALS WHERE FFWs ARE SPECIFIED. S1 31/12/22 ISSUED FOR CONSTRUCTION ASM VS PK DR - AS
5. FOR FABRICATION SPEC. REFER TO ES08-05 & MEC.
6. FOR PRESSURE TEST SPEC. REFER TO WOOD DOC. NO.: 2300-89A1. REV. DATE DESCRIPTION BY CHKD STRESS MTO INST APP
7. FOR NON DESTRUCTIVE TESTING REFER TO EN 13480-5 SECTION 8. CONTRACT No. TITLE PIPING ISOMETRIC
8. FOR PIPING MATERIAL SPECIFICATION REFER TO WOOD DOC.NO.: 2300-8230-SP-000-0002.
2300 2"-BD-A54-1B-282470/0-NI
CLIENT CONTRACT No. PREEM DRAWING No.
IL01969 M282470&MTC:001
DRAWING No. REV
G
PIPE STRESS REPORT NO. - 2300-52-AAA-BD-280-282470-01 S2 G

WOOD DSN No.6386

EXTRACTION DATE & TIME: 02-03-2023 16:30:26