Nothing Special   »   [go: up one dir, main page]

New 308

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

TYCO Fire Protection Products Technical Support

September 22, 2017

Software Release

Product: 4100ES, 4010ES


Programmer: ESProgrammer_3.08.exe
Executive: ES_3.08.bin
Slaves included: 4010IDNETPLUS_3.12.11
(new files in bold) Amp_20203 (cards 566-205, -206, -208 use with > 28 speakers/circuit)
Amp_2.03.03 (cards 566-205, -206, -208 use with up to 28 speakers/circuit)
Amp2_3.02.05 (cards 566-521, -523, -524)
AudAna_20101
AudDig_10502 (card 566-033)
AudDig2_20102 (card 566-409)
BMUX_10102
BNIC_1.01.02
CPUBoot_2.02.03
EBOOT_1.01.03
EOS_1.01.02
EPS_1.07
ESS_1.07
FUI_1.05
FUIBoot_104
IDNET_3.12.12
IDNET1PLUS_3.12.12
idnet2_2.01
IDNETPLUS_3.12.11
lmc_3.01.02
MSS_3.12.11
MSSI_3.12.12
mxdloop_2.01.03
Phone_1.04.01
rps_3.12.11
SecurityZoneRelay_1.02
SPS_204 (for Rev E and earlier boards)
sps_3.12.12
TFXLoop_10103
tic_3.01.02
TIC2_1.01.03
TPS_1.05.05
XALIC_10105
XBC_10604
XPS_3.12.11
XSIG_101

Compatibility See SB11002 (in C:\4100ESINFO)

After downloading:
Find the Programmer installation file in C:\4100ESProg
Find the BIN files in C:\4100ubin\Rev3-08
Find the documentation in C:\4100ESinfo
To Install the Programmer go to C:\4100ESProg and double click on ESProgrammer_3.08.exe

1
ES Programmer 3.08
DBF Revision = 178

Functional Changes:
 Adds support for NXNA Weatherproof speaker devices

Fixed Defects:
814621 Four instances of the ".net 3.5" dialog were displayed while doing a clean install of ES
Programmer

Other Changes:
815074 In the Audio Editor, importing a WAV file requires a Programmer Dongle
815897 FUI Watermark Bitmap needs to be updated

4100/4010ES Executive 3.08


Functional Changes:
 Adds support for NXNA Weatherproof speaker devices

Fixed Defects:
800905 ES Panel crash with Error 4: Structure not Dequeued in Terminal mode.
806353 Panel crashes with error 23 undefined table entry.

Other Changes:
 None

Usage Notes:
 Requires revision 3.08 or greater of the ES Programmer.
 Revision 3.08 of the ESSupport tools should be used with this release.

IDNET_3.12.12.bin
IDNET1PLUS_3.12.12.bin
MSSI_3.12.12.bin
sps_3.12.12.bin

Functional Changes
 Add support for high temperature heat sensor

Fixed Defects
668181 Short search cannot be completed

Other Changes
 None
2
idnet2_2.01.bin
TIC2_1.01.03.bin

Functional Changes
 Support flash hardware card type in blocked area

Fixed Defects
815448 Cold reset to a slave could cause other slaves to go offline

Other Changes
 None

EPS_1.07.bin

Functional Changes
 Adds support for NXNA weatherproof Speaker devices

Fixed Defects
814527 Speaker devices would report Audio Wiring Abnormal troubles during Alarm Silence/Reset or
during paging
805517 TrueAlert SelfTest hangs if device has gone missing since startup.
780003 AUXNAC will likely turn on steady upon EPS power up.

Other Changes
 None

ESS_1.07.bin

Functional Changes
 None

Fixed Defects
805517 TrueAlert SelfTest hangs if device has gone missing since startup.

Other Changes
 None

You might also like