The RADWIN Smart-Node is an outdoor communications and power solution that provides 240W of power, 5 Gigabit PoE ports, fiber and copper networking interfaces, a 120Wh lithium-ion battery backup, and weatherproof IP67 enclosure. It bridges broadband and IoT applications by enabling integration of devices like cameras, WiFi access points, and sensors. The compact Smart-Node guarantees low visual impact for street-level deployments and reliability in extreme environments.
The RADWIN Smart-Node is an outdoor communications and power solution that provides 240W of power, 5 Gigabit PoE ports, fiber and copper networking interfaces, a 120Wh lithium-ion battery backup, and weatherproof IP67 enclosure. It bridges broadband and IoT applications by enabling integration of devices like cameras, WiFi access points, and sensors. The compact Smart-Node guarantees low visual impact for street-level deployments and reliability in extreme environments.
The RADWIN Smart-Node is an outdoor communications and power solution that provides 240W of power, 5 Gigabit PoE ports, fiber and copper networking interfaces, a 120Wh lithium-ion battery backup, and weatherproof IP67 enclosure. It bridges broadband and IoT applications by enabling integration of devices like cameras, WiFi access points, and sensors. The compact Smart-Node guarantees low visual impact for street-level deployments and reliability in extreme environments.
The RADWIN Smart-Node is an outdoor communications and power solution that provides 240W of power, 5 Gigabit PoE ports, fiber and copper networking interfaces, a 120Wh lithium-ion battery backup, and weatherproof IP67 enclosure. It bridges broadband and IoT applications by enabling integration of devices like cameras, WiFi access points, and sensors. The compact Smart-Node guarantees low visual impact for street-level deployments and reliability in extreme environments.
Smart-Node with input power of 100-240 VAC, standard battery
RW-8019-1100
Product Description Product Highlights
RADWIN Smart-Node is an outdoor communi- • 240W Power supply (100-240V AC input) cations and power solution that reduces costs • Managed switch: 5 Gigabit PoE ports (802.3 and accelerates the roll-out of smart-city, IoT af/at, at+(60W) and Passive PoE 24V/56V) and telecom projects. The all-in-one Smart- • Fiber/copper combo port (SFP/RJ-45) Node solution offers a wide variety of power • Communications and power management and networking interfaces including fiber and • UPS (Lithium-ion battery) an array of radio technologies to connect • DC output for external devices (12V/24V) multiple devices such as CCTV cameras, Wi-Fi • Alarms IN/OUT (Dry contacts) access points and IoT sensors. • Internal interfaces for 3rd party devices integration (Cellular, Wi-Fi, IoT gateways, Bridging the gap between broadband and IoT etc.) applications, Smart-Node enables easy • Weather proof enclosure – IP67 integration with 3rd party devices to support multiple applications ranging from city surveillance, smart-lighting, waste management, smart-metering and more.
Smart-Node is a remarkably compact, IP-67
protection grade solution that guarantees low visual impact for street level deployments and high reliability when exposed to extreme temperatures and tough environments. Product Specifications: Power Power Supply 240W (100-240V AC input, 50/60Hz 3.5A) UPS Backup - 2.5A/h Lithium-ion battery (120W/h at full load) - Charging temperature 0°C to 30°C/ 35°F to 86°F (for extended range, please contact RADWIN) - Discharging temperature -10°C to 45°C / 14°F to 113°F (at full load) - 500 charging cycles at 20°C / 68°F (may vary according to environment conditions) Power Protections - Over/under voltage - Short circuit - Battery low voltage disconnect - Battery over charge - 10kV/5kA and IEEE C62.41.2 max power surge protection - Discharge current, 8/20μs 10kA max Ethernet surge protection Ports PoE1 - RJ-45 - Ethernet - 802.3 af/at/at+(60W)or 56V Passive PoE PoE2 - RJ-45 - Ethernet - 802.3 af/at/at+(60W)or 56V Passive PoE PoE3 - RJ-45 - Ethernet - 802.3 af/at(56V-15/30W) or 24V passive PoE PoE4 - RJ-45 - Ethernet - 802.3 af/at(56V-15/30W) or 24V passive PoE PoE5 (combo port with SFP) - RJ-45 - Ethernet - 802.3 af/at/at+(60W)or 56V Passive PoE SFP (combo port with PoE5) SFP, Fiber DC 12/24V output power ALM-IN 2 dry contacts - input (triggered by short circuit) ALM-OUT 2 dry contacts - output (up to 60VDC, up to 1A load) Audio (RJ12) Not supported in this version. Contact RADWIN for more information Serial (RJ45) Not supported in this version. Contact RADWIN for more information ANT N-Type antenna port for 3rd party equipment Networking Switch Configuration - IEEE 802.3: 10BASE-T, IEEE 802.3u: 100BASE-T, IEEE 802.3ab: 1000BASE-T - VLAN (Transparent/Aware, Port VLAN mode: Access/Trunk, port VLAN ID) - SNTP, NTP client - MAC Addresses: 1k - SNMP polling of traffic, including read / write - Report traffic per second, per port - Watchdog on IP (ping), reset port if not responding Management and Configuration Interface Web Management interface, SNMP V1 Configuration - Switch PoE port On/Off - Graceful power degradation by priority - DC-OUT port power configuration (12V/ 24V) - Trap destinations - Alarms In/Out management Monitoring - Ports status: connected ports, PoE on/off, power consumption, voltage (56V, 24V), priority, VLAN and traffic - Power management information: power source, lithium battery status, battery time remaining, supplied current and voltage and temperature - Events - Tamper sensor (trap) Management and maintenance - Remote monitoring and management - SW update - Backup and Restore - Factory default - Hard reset - Power source status LED - Remote reset of PoE ports Internal Interfaces for 3rd Party Devices Integration Power and communication - RJ-45, Ethernet interfaces available for 3rd party - 802.3 af/at or 24V passive PoE devices - 12V/15W output power Internal Space for 3rd party 47(h)x116(w)x160(d)mm Equipment Maximum power consumption 15W (under full Smart-Node power consumption load) for 3rd party Equipment Antenna Port N-Type antenna port (SMA internal interface) IoT Port General purpose port 3G/4G Cellular module and Not supported in this version. Contact RADWIN for more information micro SIM slot Mini PCI express Not supported in this version. Contact RADWIN for more information SD Card Not supported in this version. Contact RADWIN for more information USB 3.0 Not supported in this version. Contact RADWIN for more information Mechanical Dimensions 379(h) x 309(w) x 115(d) mm Weight 7.4 Kg
Installation types Pole mount, Wall mount
Environmental Operating Temperatures -40° to 60°C / -40° to 140°F (Backup UPS operating temperature is –10°C to 45°C / 14°F to 113°F) Degrees of Protection EN/IEC 60529, IP67 (NEMA 4) Safety US/CAN (cTUVus) UL 60950-1, UL 60950-22, CAN/CSA C22.2 60950-1, CAN/CSA C22.2 60950-22 CE/IEC EN/IEC 60950-1, EN/IEC 60950-22 EMC FCC 47 CFR Part15, Subpart B, Class B CE EN 301 489-1, EN 301 489-4, EN 301 489-17, EN 300 386 CAN/CSA-CEI/IEC CISPR 32:2015, Class B AS/NZS CISPR 32:2015, Class B
Ordering Info Part Number: RW-8019-1100 Description: Smart-Node with input power of 100-240 VAC, standard battery.
This data sheet shall be used only for information purpose.
The products and specifications described herein are subject to availability and may change without prior notice.
Corporate Headquarters, T. +972.3.766.2900, E. sales@radwin.com, www.radwin.com