PT-G503 Series

IEC 61850-3/62439-3 3-port full Gigabit managed redundancy boxes

Features and Benefits

• IEC 61850-3, IEEE 1613 (power substations) compliant

• IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant

• PRP/HSR Coupling and QuadBox functions supported

• Ethernet console reserved for local access

• Built-in MMS server based on IEC 61850-90-4 switch data modeling for
power SCADA
• Hardware-based IEEE 1588v2 PTP supported

• Design ready for NERC CIP compliant system development

• Power inputs with universal 24 VDC, 48 VDC, or 110/220 VDC/VAC power

supply range
• -40 to 85°C operating temperature range

Certifications

Introduction
The PT-G503-PHR-PTP Series redundancy boxes (RedBoxes) are compliant with the latest standardized redundancy protocols for industrial
automation networks, IEC 62439-3 Clause 4 (Parallel Redundancy Protocol, PRP) and IEC 62439-3 Clause 5 (High-availability Seamless
Redundancy, HSR). PRP/HSR ensures the highest system availability and data integrity for mission-critical applications in electrical substation
and/or process automation systems that require zero recovery time redundancy. The redundant protocols Coupling and QuadBox are also
supported. With Coupling and QuadBox, HSR rings can be connected to make the redundant network more versatile. The PT-G503-PHR-PTP
Series comes with three 10/100/1000BaseT(X) and 100/1000BaseSFP slot combo ports.
One slot (INTERLINK port) is for an internal link for connecting with a SAN (Singly Attached Node). The other two ports (LAN A and LAN B ports) are
for PRP/HSR redundant protocol communications. With this full Gigabit Ethernet port design, the PT-G503-PHR-PTP Series provides high
performance for PRP/HSR systems.
The PT-G503-PHR-PTP Series also provides IEEE 1588v2 PTP in end-to-end one-step transparent clock mode for time-critical applications and
power inputs with 24/48 VDC or 110/220 VDC/VAC ranges to increase the reliability of the power supply.

Additional Features and Benefits

• PRP (Parallel Redundancy Protocol): Transmit or receive two • Fiber Check™ provides monitoring and diagnosis functionality on SFP
independent active paths to/from different LANs simultaneously on fiber ports
a zero recovery time network • Hardware-based IEEE 1588v2 PTP (Precision Time Protocol) end-to-
• HSR (High-availability Seamless Redundancy): Every frame is end one-step transparent clock for precise time synchronization of
duplicated and then transmitted in both directions of the HSR ring networks
to deliver zero switchover time • Automatic warning by exception through email and relay output
• PRP/HSR coupling: Supports coupling from an HSR ring node to • Configurable via web browser, CLI, Windows utility, and ABC-02
redundant PRP LANs (Up to 7 PRP LANs) automatic backup configurator
• QuadBox function: Supports peer coupling of rings via
interconnecting two INTERLINK ports on two separate RedBoxes

1 www.moxa.com
Specifications
Ethernet Interface
Combo Ports (10/100/1000BaseT(X) or 100/ 3
1000BaseSFP+)

Console Port Ethernet console (10/100/1000Mbps RJ45)

Standards IEEE 802.3 for 10BaseT

IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX

Ethernet Software Features

Filter Static Multicast

Management Back Pressure Flow Control, BOOTP, DHCP Client, Fiber check, Flow control, HTTP,
IPv4/IPv6, LLDP, Port Mirror, RARP, RMON, SMTP, SNMP Inform, SNMPv1/v2c/v3,
Syslog, Telnet

Power Substation MMS

Redundancy Protocols HSR, PRP, RSTP grouping

Security HTTPS/SSL, TACACS+, RADIUS, SSH, Trust access control

Time Management NTP Server/Client, SNTP, IEEE 1588v2 PTP (hardware-based)

MIB IEC 62439-3 MIB

USB Interface
Storage Port USB Type A

Serial Interface
Console Port USB-serial console (Type B connector)

Input/Output Interface
Alarm Contact Channels Resistive load: 1 A @ 24 VDC

Digital Inputs +13 to +30 V for state 1

-30 to +3 V for state 0
Max. input current: 8 mA

Power Parameters
Input Current PT-G503-PHR-PTP-HV: 0.260/0.170 A @ 110/220 VAC
PT-G503-PHR-PTP-HV: 0.150/0.080 A @ 110/220 VDC
PT-G503-PHR-PTP-WV: 0.660/0.360 A @ 24/48 VDC

Input Voltage PT-G503-PHR-PTP-HV: 110/220 VAC/VDC (85 to 264 VAC, 88 to 300 VDC)
PT-G503-PHR-PTP-WV: 24/48 VDC (18 to 72 VDC)

Power Connector 1 removable 5-contact terminal block(s)

Overload Current Protection Supported

Reverse Polarity Protection Supported

Physical Characteristics
Housing Aluminum

IP Rating IP40

Dimensions (without ears) 80 x 160 x 110 mm (3.15 x 6.30 x 4.33 in)

2 www.moxa.com
Weight 1210 g (2.69 lb)

Installation DIN-rail mounting

Environmental Limits
Operating Temperature -40 to 85°C (-40 to 185°F)

Storage Temperature (package included) -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications

Safety UL 508

EMI EN 55032 Class A, CISPR 32, FCC Part 15B Class A

EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs

Power Substation IEC 61850-3, IEEE 1613

Railway EN 50121-4

MTBF
Time PT-G503-PHR-PTP-HV: 566,844 hrs
PT-G503-PHR-PTP-WV: 440,857 hrs

Standards Telcordia (Bellcore) Standard TR/SR

Warranty
Warranty Period 5 years

Details See www.moxa.com/warranty

Package Contents
Device 1 x PT-G503 Series switch

Cable 1 x USB type A male to USB type B male

Installation Kit 1 x DIN-rail kit

1 x cap, for type A USB port
4 x cap, plastic, for RJ45 port
1 x cap, plastic, for console port
3 x cap, plastic, for SFP slot

Documentation 1 x document and software CD

1 x quick installation guide
1 x warranty card
1 x product certificates of quality inspection, Simplified Chinese
1 x product notice, Simplified Chinese

Note SFP modules need to be purchased separately for use with this product.

3 www.moxa.com
Dimensions

Ordering Information
Combo Ports
Max. No. of Gigabit
Model Name Max. No. of Ports 10/100/1000BaseT(X) Input Voltage Operating Temp.
Ports
or 100/1000BaseSFP

PT-G503-PHR-PTP-WV 3 3 3 24/48 VDC -45 to 85°C

PT-G503-PHR-PTP-HV 3 3 3 110/220 VDC/VAC -45 to 85°C

4 www.moxa.com
Accessories (sold separately)
Software
MXview-50 Industrial network management software with a license for 50 nodes (by IP address)

MXview-100 Industrial network management software with a license for 100 nodes (by IP address)

MXview-250 Industrial network management software with a license for 250 nodes (by IP address)

MXview-500 Industrial network management software with a license for 500 nodes (by IP address)

MXview-1000 Industrial network management software with a license for 1000 nodes (by IP address)

MXview-2000 Industrial network management software with a license for 2000 nodes (by IP address)

MXview Upgrade-50 License expansion of MXview industrial network management software by 50 nodes (by IP address)

Storage Kits
ABC-02-USB Configuration backup and restoration tool, firmware upgrade, and log file storage tool for managed
Ethernet switches and routers, 0 to 60°C operating temperature

ABC-02-USB-T Configuration backup and restoration tool, firmware upgrade, and log file storage tool for managed
Ethernet switches and routers, -40 to 75°C operating temperature

SFP Modules
SFP-1FELLC-T SFP module with 1 100Base single-mode with LC connector for 80 km transmission, -40 to 85°C
operating temperature

SFP-1FEMLC-T SFP module with 1 100Base multi-mode with LC connector for 4 km transmission, -40 to 85°C
operating temperature

SFP-1FESLC-T SFP module with 1 100Base single-mode with LC connector for 40 km transmission, -40 to 85°C
operating temperature

SFP-1G10ALC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX
1310 nm, RX 1550 nm, 0 to 60°C operating temperature

SFP-1G10ALC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX
1310 nm, RX 1550 nm, -40 to 85°C operating temperature

SFP-1G10BLC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX
1550 nm, RX 1310 nm, 0 to 60°C operating temperature

SFP-1G10BLC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX
1550 nm, RX 1310 nm, -40 to 85°C operating temperature

SFP-1G20ALC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX
1310 nm, RX 1550 nm, 0 to 60°C operating temperature

SFP-1G20ALC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX
1310 nm, RX 1550 nm, -40 to 85°C operating temperature

SFP-1G20BLC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX
1550 nm, RX 1310 nm, 0 to 60°C operating temperature

SFP-1G20BLC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX
1550 nm, RX 1310 nm, -40 to 85°C operating temperature

SFP-1G40ALC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX
1310 nm, RX 1550 nm, 0 to 60°C operating temperature

SFP-1G40ALC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX
1310 nm, RX 1550 nm, -40 to 85°C operating temperature

SFP-1G40BLC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX
1550 nm, RX 1310 nm, 0 to 60°C operating temperature

SFP-1G40BLC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX
1550 nm, RX 1310 nm, -40 to 85°C operating temperature

SFP-1GEZXLC SFP module with 1 1000BaseEZX port with LC connector for 110 km transmission, 0 to 60°C operating
temperature

SFP-1GEZXLC-120 SFP module with 1 1000BaseEZX port with LC connector for 120 km transmission, 0 to 60°C operating
temperature

SFP-1GLHLC SFP module with 1 1000BaseLH port with LC connector for 30 km transmission, 0 to 60°C operating
temperature

5 www.moxa.com
SFP-1GLHLC-T SFP module with 1 1000BaseLH port with LC connector for 30 km transmission, -40 to 85°C operating
temperature

SFP-1GLHXLC SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C operating
temperature

SFP-1GLHXLC-T SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C
operating temperature

SFP-1GLSXLC SFP module with 1 1000BaseLSX port with LC connector for 500 m transmission, 0 to 60°C operating
temperature

SFP-1GLSXLC-T SFP module with 1 1000BaseLSX port with LC connector for 500 m transmission, -40 to 85°C
operating temperature

SFP-1GLXLC SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C operating
temperature

SFP-1GLXLC-T SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C operating
temperature

SFP-1GSXLC SFP module with 1 1000BaseSX port with LC connector for 300/550 m transmission, 0 to 60°C
operating temperature

SFP-1GSXLC-T SFP module with 1 1000BaseSX port with LC connector for 300/550 m transmission, -40 to 85°C
operating temperature

SFP-1GZXLC SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C operating
temperature

SFP-1GZXLC-T SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C operating
temperature

© Moxa Inc. All rights reserved. Updated Jun 08, 2022.

This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.

6 www.moxa.com