Bill of Quantity

dk;Z dk uke %
Rates
S. No. Item of work Qty. Unit
1 Road Marking with Hot Applied Thermoplastic Compound with ReflectorisIng Glass
Beads on Bituminous Surface.
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including
reflectorising glass beads 0? 250 gms per sqm area, thickness of 2.5 mm is exclusive of
surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform
and free from streaks and holes. DSR-8.13 Ch- 28 SI No-2

14364.68 Sqm 618.00

2 Road Marking with Hot Applied Thermoplastic Compound with Reflectorlsing Glass
Beads on Bituminous Surface. (Repeated / Tranvers bar) Providing and laying of hot
applied thermoplastic compound 5 mm thick Including reflectorising glass beads 0) 500
gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per
IRC:35-2015 The finished surface to be level, uniform and free from streaks and
holes.Ch-28 SI No-3
1028.16 Sqm 840.00
3 Reflective Raised Pavement Markers (Cat Eye/ Road Stud)
Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road
Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High-lmoact
Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material 8816.00 No. 324.00
approved by the Engineer. The Marker shall support a load of 13,635 kg tested in
4 Direction and place Identification signs up to 0.90 sqm size Board
Providing and erecting direction and place identification retro-reflectorised sign as per
IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be
tested for a certificate of having the sheeting tested for coefficient of retro reflection.
daytime colour and luminance, shrinkage, flexibility. liner removal, adhesion, impact
99.00 No 6317.00
resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its
5 Retro-reflectorised Traffic sign as per IRC-87-2012
providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as
per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed
over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x
75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with
(i) 900 mm equilateral tringle with diffinitation plate 485.00 No 3343
(ii) Mandatory/Ragulatory sign Boards 24.00 No 3818
(iii) 900 mm high octagon 40.00 No 4824
Total
6 Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor
at the rate of 0.25 kg per sqm on the prepared bituminous/ granular surface cleaned with
mechanical broom as per MoRTH specification 5th revision clause No. 503 including
cost of all materials, T&P, labour, cartage for proper completion of work as per direction
of Enginee-in-Charges.
5145.00 Sqm 12.60
7 Providing and laying bituminous concrete (Grading-II) with 100-120 TPH hot mix plant
producing an average output of 75 tonnes per hour using crushed aggregates of
specified grading, premixed with bituminous binder VG-30 as per approved job mix
formula which ever is higher of mix and filler, transporting the hot mix to work site, laying
with a hydrostatic paver finisher with sensor control to the required grade, level and
alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the
desired compaction as per MORTH specification 5th revision clause No. 509 complete in
all respects including cost of all materials, T&P, labour, cartage for proper completion of
work as per direction of Enginee-in-Charges.

410.38 Cum 10579.90

8 Lettering and Painting with enamel paint (renewal coat) Including cost of
material, labour and T&P etc Complete.

(a) Hectometer Stone 80 No 65.00

(b) Km. Stone (Ordinary) 16 No 180.00
(c) Km. Stone (5th) 4 No 240.00
Total
9 Road Delinator
Delineator Supply & Fixing of M S Delineator made of Mild steel with pure polyester
powder coating with the minimum thickness of powder coating of not less than 40 micron
for protection against corrosion The surface should be conceated so that there should
not be any exposed surface without powder coating. Alternatively, these metal guide 44 No 828
poles can be concealed with thermoplastic body. The posts shall have Ian ellipsoidal or
circular design with the height of the pole shall be 800 to 900 mm above the ground with
about 200 to 300 mm base which can be anchored onto the ground. Mild steel Guide
Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956
which would ensure to obtainl clear visibility of the road alignment during night time. The

in Lacs

JE AE EE
 Amount

8877370.20

863654.40

2856384.00

625383.00
 1621355.00
91632.00
192960.00
1905947.00

64827.00

4341779.36

5200.00
2880.00
960.00
9040.00

36432.00
19580816.96
195.81
 DETAILS OF MEASUREMENT
dk;Z dk uke %
S. Length Width Height
Description of Items No. (m)
Qty
No. (m) (m)
1 Road Marking with Hot Applied Thermoplastic Compound with ReflectorisIng Glass Beads on Bituminous Surface.
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads 0? 250 gms per sqm area, thickness of 2.5
mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. DSR-8.13
Ch- 28 SI No-2

Road Strips (edge line) 1 x 4.00 19830.00 0.15 11898.00

Road Strips (centre line) 1 x 2.00 19830.00 0.15 1982.80
Pedestrian Crossing 49 x 6 3.00 0.50 441.00
Stop Line 49 x 1 8.75 0.10 42.88
14364.68
2 Road Marking with Hot Applied Thermoplastic Compound with Reflectorlsing Glass Beads on Bituminous Surface. (Repeated / Tranvers bar) Providing and
laying of hot applied thermoplastic compound 5 mm thick Including reflectorising glass beads 0) 500 gms per sqm area, thickness of 5 mm is exclusive of
surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.Ch-28 SI No-3

Repeated Bar
84 x 6 6.80 0.30 1028.16
1028.16
3 Reflective Raised Pavement Markers (Cat Eye/ Road Stud)
Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrile) or
HIPS (High-lmoact Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support
a load of 13,635 kg tested in accordance with ASTM D4280.The Reflective panels shall consist of number of lenses containing single or dual prismatic
cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTM
D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+1-5 degree to base and the area of each retro -reflecting surface shall not be
less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the
marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy
Installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers
shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the
reflecting panel , to the Engineer . In addition . a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the
contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced , damaged . get worn out or lose their reflectivity
compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer . at his
own cost The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-
Charge.RPM (with shank) Ch-28 SI No-5

On edge Line
4 x 2204 8816.00
8816.00
4 Direction and place Identification signs up to 0.90 sqm size Board
Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting The Retro reflective
sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection. daytime colour and luminance, shrinkage, flexibility.
liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be
obtained from International/Govemment Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from
international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a
certificate conforming to ASTM Specification (D4956-09) on artificial ccelerated weathering requirements from a reputed laboratory in India can be
accepted provisionally. In such a situation, the Employer I Client, if so desires, could seek for a performance guarantee which would be released after
receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends , letters , numerals and
borders etc should be as per MoRTH specification No-801.3.7 . Sheet fixed over aluminium sheeting .2 mm thick with area not exceeding 0.9
sqm.Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade
cement concrete 45x45x60 cm.,below ground level as per approved drawing. complete. Ch-28 Si No- 19

Informatary Board
1 x 99 99.00
Total 99.00

file:///conversion/tmp/activity_task_scratch/730038762.xlsx
 5 Retro-reflectorised Traffic sign as per IRC-87-2012
providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV
vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm. 60 cm below ground level as per approved drawing.
The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance,
shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed
these tests shall be obtained from International/ Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained
from International condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad.
Alternatively, a certificate conforming to ASTM Specification (0 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India
can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released
after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67.2012. Legends , letters , numerals and
borders etc should be as per MoRTH specification No-801.3.7 . Proof of the same in form of government report shall be uploaded while quoting tender. Ch-
28 SI No-

Cautionary Boards
i) 900 mm equilateral tringle with diffinitation plate 1 x 99 99.00
(a) Side road left 1 x 9 9.00
(b) Side road right 1 x 7 7.00
(c) Cross roads 1 x 25 25.00
(d) T- Intersection major road ahead 1 x 24 24.00
(e) Major road ahead 1 x 16 16.00
(f) Merging traffic ahead 1 x 2 2.00
(g) Gap in median 1 x 76 76.00
(h) Pedestrian crossing 1 x 50 50.00
(i) Built up area 1 x 2 2.00
(j) Speed table 1 x 30 30.00
(k) Rumble strips 1 x 40 40.00
(l) overhead cables 1 x 2 2.00
(m) School 1 x 6 6.00
(n) Object hazard marker 1 x 12 12.00
(o) OHM with compulsory keep left 1 x 50 50.00
(p) Two way hazard marker with pass either road 1 x 35 35.00
Total for 900 mm triangle cautionary boards 485.00
Mandatory/Ragulatory sign Boards
i) 600 mm Circular with diffinitation plate (200mm X 600mm)
(a) Hight limit 1 x 12 12.00
(b) Speed limit (1) 20 km/h 1 x 1 1.00
(2) 40 km/h 1 x 4 4.00
(3) 60 km/h 1 x 7 7.00
Total for 600 mm circular cautionary boards 24.00
900 mm high octagon
(a) STOP Boards 1 x 40 40.00
6 Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/
granular surface cleaned with mechanical broom as per MoRTH specification 5th revision clause No. 503 including cost of all materials, T&P, labour,
cartage for proper completion of work as per direction of Enginee-in-Charges.

Ramble Strip 0 x 6 8.75 0.30 0.00

Speed Table 70 1 8.75 8.40 5145.00
5145.00
7 Providing and laying bituminous concrete (Grading-II) with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using
crushed aggregates of specified grading, premixed with bituminous binder VG-30 as per approved job mix formula which ever is higher of mix and
filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification 5th revision clause No. 509
complete in all respects including cost of all materials, T&P, labour, cartage for proper completion of work as per direction of Enginee-in-Charges.

Ramble Strip
0 x 6 8.75 0.30 0.025 0.00
Speed Table 70 x 1 8.75 6.70 0.1 410.38
410.38
8 Lettering and Painting with enamel paint (renewal coat) Including cost of material, labour and T&P etc Complete.

(a) Hectometer Stone 1x 80 80

(b) Km. Stone (Ordinary) 1x 16 16
(c) Km. Stone (5th)
1x 4 4

file:///conversion/tmp/activity_task_scratch/730038762.xlsx
 Road Delinator
Delineator Supply & Fixing of M S Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of
powder coating of not less than 40 micron for protection against corrosion The surface should be conceated so that there should not be
any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts
shall have Ian ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300
9 mm base which can be anchored onto the ground. Mild steel Guide Poles shall conform to Type XI sheeting specifications as per IRC:67
and ASTM D4956 which would ensure to obtainl clear visibility of the road alignment during night time. The Retro reflective sheeting shall
be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage,
flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having
passed these tests shall be obtained from International/Government Laboratory / Institute by the manufacturer of the sheeting and in case 1x 44 44
the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of

JE AE EE

file:///conversion/tmp/activity_task_scratch/730038762.xlsx
 Qty

Sqm

Sqm

No.

No

file:///conversion/tmp/activity_task_scratch/730038762.xlsx
 No

Nos

Nos

Sqm

Nos
Nos

Nos

file:///conversion/tmp/activity_task_scratch/730038762.xlsx
 Nos

file:///conversion/tmp/activity_task_scratch/730038762.xlsx