Technische

Technical specifi
Datencation

Kaltfräse
Cold milling
W 200
machine W 2000
Technical specification

Cold milling machine W 2000

Milling width max. 2,000 mm

Milling depth *1 0 – 320 mm

Milling drum

Tool spacing 15 mm

Number of tools 162

Drum diameter with tools 980 mm

Engine

Manufacturer Caterpillar

Type C 15 ATAAC

Cooling Water

Number of cylinders 6

Rated power at 2,100 min-1 433 kW / 581 HP / 589 PS

Displacement 15.21 l

Fuel consumption, full load 124 l / h

Fuel consumption in field mix 56 l / h

Emission standards EU Stage 3a / US EPA Tier 3

Electrical system 24 V

Filling capacities

Fuel tank 1,310 l

Hydraulic fluid tank 300 l

Water tank 3,430 l

Driving characteristics

Travel speed 0 – 84 m / min (0 – 5 km / h)

Crawler tracks

Crawler tracks, front and rear (L x W x H) 1,720 x 300 x 610 mm

Conveyor system

Belt width of primary conveyor 800 mm

Belt width of discharge conveyor 800 mm

Theoretical capacity of discharge conveyor 330 m3 / h

Shipping dimensions

Machine (L x W x H) 7,200 x 2,585 x 3,000 mm

Discharge conveyor (L x W x H) 8,550 x 1,370 x 1,300 mm

*1 = The maximum milling depth may deviate from the value indicated, due to tolerances and wear.
Dimensions in mm

14,800*

14,050

7,115

4,725
3,000*
3,000

870 2,150 2,650 850

76 645

45°

800

1,300
2,550

1,640
1,400

165

131

63

45°

* = Dimensions for low-loader transport

2 // 3
 Machine weights of cold milling machine W 2000

Empty weight of machine without filling media 27,700 daN (kg)

Operating weight, CE * 30,000 daN (kg)

Maximum operating weight (full tanks, full range of equipment) 33,427 daN (kg)

Weights of filling media

Water tank filling in kg 3,430 daN (kg)

Diesel tank filling in kg (0.83 kg/l) 1,087 daN (kg)

Optional equipment features increasing /

reducing empty weight

Milling assembly and milling drum, milling width 2,200 mm 300 daN (kg)

Milling assembly and milling drum in FCS Light design,

600 daN (kg)
milling width 2,000 mm

Conveyor in folding conveyor design 360 daN (kg)

Canopy 250 daN (kg)

* = Weight of machine with half-full water tank, half-full fuel tank, driver (75 kg) and tools.
Optional equipment: canopy and folding conveyor
Dimensions in mm

11,600
3,650

3,000
Rear view W 2000
Dimensions in mm
320

320

712 1,400 712 1,400

165 365

2,550 2,755

Milling width 2,000 mm Milling width 2,200 m

4 // 5
Milling radius of cold milling machine W 2000 at 150 mm milling depth
Dimensions in mm

Rmin 22,110
,900
= 8
th 2, 00: Rmin =
200:
,0
Millin width 2
g wid
g
Millin

45°
45°

M
M illing
illi
ng wid
wi th
dt 2,
h
2,2 000:
00 R
: R min
=
= 2,07
m
in
1,8 0
70
 Equipment features of cold milling machine W 2000

Standard equipment: Optional equipment:

Basic machine with engine Basic machine with engine
Water cooler with temperature-related fan speed Special painting, one colour
Lockable, hydraulically opening engine cowling with integrated Milling drum housing with milling drum
soundproofing package
Milling drum housing for milling width 2,000 mm, FCS Light
Air intake with cyclonic pre-cleaner
Air compressor system Milling drum housing for milling width 2,200 mm,
Standard painting in Wirtgen white with orange stripes made entirely of wear plates
Milling drum housing with milling drum Milling drum, milling width 2,000 mm, tool spacing 15 mm,
Milling drum housing for milling width 2,000 mm, HT11 quick-change toolholder system
made entirely of wear plates Milling drum, milling width 2,200 mm, tool spacing 15 mm,
Milling drum, milling width 2,000 mm, tool spacing 15 mm, HT11 quick-change toolholder system
in welded double-pin toolholder design Milling drum, milling width 2,000 mm, tool spacing 8 mm,
Wide opening, electro-hydraulically operated drum door / scraper HT11 quick-change toolholder system in FCS Light design
blade combination, self-locking; the scraper blade is pressurized Milling drum, milling width 2,000 mm, tool spacing 6x2 mm,
hydraulically and equipped with replaceable tungsten carbide
HT5 welded toolholder system in FCS Light design
elements
Pneumatic cutting tool driver and extractor
Right-hand side plate in hinged design
Replaceable wearing segments at the side plates Mounting carriage for milling drums
Additional control switches for scraper blade at ground level Loading of milled material
Loading of milled material Hydraulically operated folding discharge conveyor, long
Two-stage loading system with 800 mm wide conveyor belt Machine and levelling control
Discharge conveyor slewing angle of 45 degrees left and right LEVEL PRO automatic levelling system with 2 wire-rope sensors
Conveyor system with adjustable conveying speed Additional LEVEL PRO control panel
Machine and levelling control Electronic slope sensor
Proportional advance speed control across the entire speed
Operator’s platform
range via joystick
Automatic power control for optimum power adjustment Stable, soundproof GRP canopy with folding rear screen;
to different pavement materials canopy can be fully lowered hydraulically
Engageable hydraulic traction control (flow divider) Miscellaneous
Digital electric height indicator Material guide plates between the rear crawler tracks, including
Freely selectable steering mode for crawler tracks storage compartment for four tool containers and dual seat for
Engaging water injection in milling chamber convenient tool replacement
Engaging water spray system at primary conveyor
Hydraulically operated high-pressure water cleaner
Operator’s platform
(max. 200 bar)
Walk-through, anti-vibration mounted operator’s platform
with two individually adjustable driver’s seats
One control panel each left and right, adjustable in height
and tilt as well as movable to either side
WIDIS 32 multifunctional display with error code indication
in the right-hand control panel
Lockable control panel covers
Access left and right with convenient fold-away ladder
Two mirrors at the front, one mirror at the rear
Chassis and height adjustment
Wear-resistant polyurethane track pad equipment
Continuously adjustable, hydraulic all-track drive with
hydraulic differential lock
Height adjustment via proportional valve control
Miscellaneous
Lighting package with 10 spotlights
Comprehensive safety package with 6 emergency stop switches
Lockable toolbox with comprehensive toolkit for servicing and
maintenance
Storage compartment for four tool containers
Water tank filling, front
Warranty of 12 months or 1,000 engine operating hours
Machine commissioning by qualified personnel

6 // 7
 Wirtgen GmbH
Reinhard-Wirtgen-Strasse 2 · 53578 Windhagen · Germany
Phone: +49 (0) 26 45/131-0 · Fax: +49 (0) 26 45/131-242
Internet: www.wirtgen.com · E-Mail: info@wirtgen.com

Illustrations are without obligation. Subject to technical changes.

Performance data depend on operational conditions. – No. 15-20 EN-08/10 © by Wirtgen GmbH 2010. Printed in Germany